Service documents

11-2016

The latest version of service manual is available at: www.dudek.eu/en/service-and-inspections/

Full inspection is recommended every 24 months, if not advised otherwise by the inspecting person due to current paraglider condition.

Paragliders in commercial use (training and tandem flights) should be undergoing Full Inspection every 12 months (excluding first 24-month period after purchase).

Technical inspection is carried out by the manufacturer or authorised person.

Hadron 1.1 18 20 22 24

Approval DGAC DGAC DGAC DGAC

Number of cells 59 59 59 59

Surface area (flat) [m 2] 18,00 20,00 22,00 24,00

Surface area (projected) [m 2] 15,62 17,36 19,10 20,83

Span (flat) [m] 10,30 10,86 11,39 11,90

Span (projected) [m] 8,32 8,78 9,21 9,61

Aspect Ratio (flat) 5,90

Aspect Ratio (projected) 4,44

Sink rate [m/s] min = 1,0; trim = 1,2-1,7; max = 2,8

Speed [km/h] min = 24; trim = 38-51; max = 62

Max. cord [cm] 216,20 227,93 239,06 249,70

Min. cord [cm] 34,60 36,51 38,30 40,00

Distance pilot to w ing [m] 6,60 7,01 7,34 7,67

Total line lenght [m] 316,00 335,00 351,00 368,00

Weight range [kg] 70-100 80-110 85-120 95-135

Weight range DGAC [kg] 70-110* 80-120* 85-140* 95-160*

Weight [kg] 4,7 5,2 5,6 5,8

Lines Edelrid A-8000U: 050 / Liros TSL: 090 & 140 & 190 & 280

Fabric Porcher Sport 38 g/m2

Dominico tex 34 g/m2

Porcher Sport Hard 40 g/m2

SR Scrim, SR Laminate 180 g/m2

Risers PASAMON - Bydgoszcz, Polska

Lining scheme

Lining scheme 2D

Total suspension lines length, measured from the lower surface of the canopy to the inside edge of the maillon (tolerancy +/- 10 mm)

Length of the lines

Hadron 1,1 - 18The tables / Tables / Tabele:The individual lenghts and type of line The total lenghtsLa longueur et le type de chaque ligne Longueur des suspentesDługości i rodzaj poszczególnych linek 2D Sumaryczna długość linek 2D

a b c d br br a b c d br br1 2107 2085 2109 2128 1204 1202 1 6119 6029 6102 6200 70662 2015 1995 2015 2037 990 997 2 6028 5936 6010 6109 68553 2054 2036 2053 2077 912 928 3 6065 5980 6050 6150 67754 1892 1855 1880 1909 791 787 4 6015 5934 5999 6094 66575 1805 1776 1796 1822 781 786 5 5930 5855 5913 6010 66516 1821 1802 1815 1838 765 753 6 5944 5878 5934 6028 65237 349 338 340 346 667 719 7 5820 5773 5824 5890 64248 306 301 298 300 660 613 8 5779 5733 5786 5846 63809 317 302 299 306 689 700 9 5699 5661 5709 5758 641210 295 285 278 279 610 625 10 5676 5648 5684 5727 632511 285 258 345 375 550 471 11 5649 5630 5664 5696 626512 289 264 339 364 466 560 12 5651 5634 5652 5676 625113 333 329 284 301 506 462 13 5467 5458 5466 5489 629414 251 302 14 579315 198 257 15 5740

16 5697 AD BD CD DD BRT BRT1 1199 1129 1130 1187 1156 11482 1106 1059 1052 1094 1155 1178 Technora A 8000U-050/70mm: XXXX3 1085 1065 961 745 6654 4196 713 801 Technora A 8000U-050: XXXX5 523 9206 592 678 Technora TSL 90: XXXX7 785

Technora 7343-140: XXXX AP BP CP DP BRD BRD1 4029 3956 4010 4078 2129 1036 Technora TSL 140: XXXX2 4141 4094 4133 4197 2434 15413 4302 4330 4376 2613 1886 Technora TSL 190: XXXX4 5130 995 835 25565 690 Technora 7343-280: XXXX

BRP1 2610 3590 Technora TSL 280: XXXXBRP2 4720 2710

TEA 1400 1400 Technora TSL 380: XXXX

Total suspension lines length, measured from the lower surface of the canopy to the inside edge of the maillon (tolerancy +/- 10 mm)

Length of the lines

Hadron 1,1 - 20The tables / Tables / Tabele:The individual lenghts and type of line The total lenghtsLa longueur et le type de chaque ligne Longueur des suspentesDługości i rodzaj poszczególnych linek 2D Sumaryczna długość linek 2D

a b c d br br a b c d br br1 2220 2196 2222 2242 1269 1267 1 6474 6378 6459 6558 74382 2124 2103 2125 2147 1045 1051 2 6382 6286 6364 6466 72173 2166 2148 2166 2191 964 979 3 6425 6331 6404 6509 71344 1993 1954 1981 2012 834 829 4 6371 6281 6350 6455 70115 1903 1873 1893 1921 824 828 5 6281 6203 6264 6368 70056 1920 1900 1914 1939 806 794 6 6298 6228 6284 6385 68717 368 357 358 364 704 758 7 6170 6116 6166 6235 67718 323 317 314 316 696 646 8 6123 6078 6123 6186 67309 335 318 315 322 726 738 9 6039 6002 6042 6093 676110 311 301 293 294 643 658 10 6014 5997 6023 6064 666811 301 272 363 396 580 497 11 5986 5966 5994 6028 660512 304 278 357 384 491 590 12 5989 5972 5985 6014 658713 351 347 299 318 534 487 13 5788 5785 5782 5800 663214 265 318 14 612215 209 271 15 6070

16 6011 AD BD CD DD BRT BRT1 1264 1190 1191 1251 1217 12092 1166 1116 1109 1153 1222 1243 Technora A 8000U-050/70mm: XXXX3 1144 1122 1013 785 7004 4506 753 845 Technora A 8000U-050: XXXX5 552 9696 624 715 Technora TSL 90: XXXX7 827

Technora 7343-140: XXXX AP BP CP DP BRD BRD1 4272 4195 4251 4323 2265 1090 Technora TSL 140: XXXX2 4394 4344 4386 4452 2592 16273 4565 4594 4643 2782 2016 Technora TSL 190: XXXX4 5438 995 910 27215 744 Technora 7343-280: XXXX

BRP1 2730 3790 Technora TSL 280: XXXXBRP2 4970 2850

TEA 1400 1400 Technora TSL 380: XXXX

Total suspension lines length, measured from the lower surface of the canopy to the inside edge of the maillon (tolerancy +/- 10 mm)

Length of the lines

Hadron 1,1 - 22The tables / Tables / Tabele:The individual lenghts and type of line The total lenghtsLa longueur et le type de chaque ligne Longueur des suspentesDługości i rodzaj poszczególnych linek 2D Sumaryczna długość linek 2D

a b c d br br a b c d br br1 2327 2302 2329 2350 1331 1329 1 6814 6705 6792 6897 77992 2228 2206 2229 2252 1097 1103 2 6714 6611 6690 6800 75653 2274 2255 2273 2300 1014 1028 3 6761 6660 6736 6851 74824 2090 2049 2077 2110 873 869 4 6709 6612 6686 6800 73505 1996 1964 1986 2015 865 869 5 6614 6525 6594 6704 73416 2015 1993 2008 2034 845 832 6 6631 6555 6615 6721 72077 386 374 375 382 739 795 7 6496 6440 6499 6565 71028 338 333 330 332 729 677 8 6452 6398 6451 6519 70599 351 333 331 338 762 774 9 6362 6318 6360 6418 709010 327 315 308 309 675 690 10 6338 6301 6339 6388 699111 316 286 381 415 608 521 11 6308 6286 6312 6352 692512 319 291 375 403 515 619 12 6311 6289 6304 6332 690613 368 364 314 333 560 511 13 6092 6086 6097 6119 695014 278 334 14 643615 220 284 15 6378

16 6306 AD BD CD DD BRT BRT1 1325 1248 1249 1312 1275 12672 1223 1171 1163 1209 1285 1305 Technora A 8000U-050/70mm: XXXX3 1200 1177 1063 823 7334 4802 791 887 Technora A 8000U-050: XXXX5 579 10176 654 750 Technora TSL 90: XXXX7 867

Technora 7343-140: XXXX AP BP CP DP BRD BRD1 4503 4422 4481 4557 2393 1142 Technora TSL 140: XXXX2 4634 4582 4626 4695 2743 17083 4815 4845 4897 2942 2140 Technora TSL 190: XXXX4 5730 995 982 28785 796 Technora 7343-280: XXXX

BRP1 2840 3980 Technora TSL 280: XXXXBRP2 5200 2980

TEA 1400 1400 Technora TSL 380: XXXX

Total suspension lines length, measured from the lower surface of the canopy to the inside edge of the maillon (tolerancy +/- 10 mm)

Length of the lines

Hadron 1,1 - 24The tables / Tables / Tabele:The individual lenghts and type of line The total lenghtsLa longueur et le type de chaque ligne Longueur des suspentesDługości i rodzaj poszczególnych linek 2D Sumaryczna długość linek 2D

a b c d br br a b c d br br1 2429 2403 2431 2453 1389 1387 1 7127 7023 7114 7226 81422 2327 2304 2328 2353 1146 1152 2 7027 6924 7010 7123 78983 2376 2356 2376 2403 1061 1074 3 7075 6977 7059 7177 78134 2182 2140 2169 2203 912 908 4 7026 6931 7008 7119 76825 2084 2052 2074 2104 904 908 5 6925 6842 6911 7017 76726 2105 2083 2099 2125 883 869 6 6947 6873 6936 7039 75347 403 391 392 399 772 831 7 6810 6751 6815 6884 74248 353 347 344 346 761 707 8 6759 6709 6765 6828 73809 366 348 345 353 796 808 9 6668 6626 6674 6730 741610 341 329 321 323 705 721 10 6643 6608 6649 6701 731011 330 298 398 433 635 544 11 6609 6585 6622 6660 723912 333 304 392 420 538 647 12 6612 6589 6614 6640 722613 385 380 328 348 585 534 13 6390 6386 6393 6411 727114 290 349 14 673815 230 297 15 6677

16 6583 AD BD CD DD BRT BRT1 1384 1303 1305 1371 1330 13232 1277 1223 1215 1263 1345 1365 Technora A 8000U-050/70mm: XXXX3 1253 1230 1110 859 7654 5084 826 927 Technora A 8000U-050: XXXX5 605 10626 683 783 Technora TSL 90: XXXX7 906

Technora 7343-140: XXXX AP BP CP DP BRD BRD1 4724 4639 4701 4781 2516 1191 Technora TSL 140: XXXX2 4864 4809 4855 4927 2886 17863 5054 5085 5140 3095 2258 Technora TSL 190: XXXX4 6009 995 1050 30285 845 Technora 7343-280: XXXX

BRP1 2950 4150 Technora TSL 280: XXXXBRP2 5420 3100

TEA 1400 1400 Technora TSL 380: XXXX

Hadron 1.1 risers

Other informations:

4

yes (standard and takeoff/landing trimmer)

trimmer buckle

pulley in position (1)

replaceable trimmertape

steering line

covered swivel

Speed system hooks

TST handle

carabinertrimmer closing loop

TEA cleat

ALC line

steering handle

Easy Keeper magnets

TEA/TSTline

pulley in position (2)

pulley in position (3)

D ABC A'

speed system pulleys

Risers

CD CDBD AC A' B AA'B AA'

Slow mode Accelerated mode

neutral length of all risers:490mm

Full speed mode

Trimmers fully closed (0)Speed-system inactive

Slowest speed, Minimum sink.Launch configuration

Trimmers fully opened Speed-system inactive (alternatively speed-system engaged with closed trims)

Increased speed

Trimmers fully opened Speed system engaged

Maximum speed

Trimmer:A - 490A’ - 515B - 540C - 585D - 630

Trimmer + Speed:A - 320A’ - 370B - 420C - 525D - 630

Speed:A - 320A’ - 350B - 380C - 435D - 490

Components