h h 2ç ñ p ip c.m. lamp a25 - bltc
TRANSCRIPT
調光
PAR38 1000lm
S - type聚光燈 & 泛光燈 - 高效能
可調光
Certificated Mark EMC LVD ErPCertificate Approval
Certificate Approval : ● : Completed : In Progress
Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
Safety & Environment SpecificationsV series -C.M. Lamp are manufactured to conform to the following safety approbation.
APP Dimming
Base Type : E27 Input Voltage : 100~240VLED Source : OsramBeam Angle : 220∘Total Power Consumption :14W±10%Power output : 12W±10%(Camera : 5W ; LED : 7W)Smart device requirement :To make sure the APP to operate smoothly, it is recommended to use with quad-core processor with 2G RAM and up.APP operating system : iOS 8.0 and up、Android 4.4 and up
V series
IP C.M. Lamp A25
Feature• Easy set-up• 1.0mm Board Fisheye Lens for 360° panorama. • 2 Megapixel CMOS Progressive Sensor• Up to 30 fps at 1280x1024 pixel Resolution• Support Micro SDXC card 64GB for long time
recording.• Built-in Microphone, to audio record.• Support 802.11b/g/n, 300Mbps wireless
Read the following guidelines before installing : • Avoid covering the front of the camera to ensure
the view can be captured completely. One third of the lamp needs be exposed outside of
the fixture to allow enough view and light.• Keep the power of the Device and the Router on in
order to monitor through the use of APP remotely.• Network bandwidth upload speed is 10Mb or
above, to keep the system stability.• Disable Router firewall before use.• Please set the Router to a fixed channel, to
improve Internet stability.
2
仕樣仕樣
Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
V series IP C.M. Lamp
Specification
Polar Diagram Part Number LED Source Input Voltage CCTC.R.I.(RA)
Beam Angle(°)
CBCP Candela
(cd)
Total Pow.+/-10%
Typical Lumens
(lm)
Efficiency(lm/W)
DimmingPower Factor(PF)
BLV8026P25-OVW3602HWF Osram 3030 100~240V 2700K 80 220 155 14 1000lm 73 APP Dimming 0.8
Option 1 : Lamp base: E27 Option 2 : Input Voltage: 100~240VOption 3 : The above CCT. is defined based on ANSI standard. Specific color temperature can be done upon customer request. For instance 2700K could be assigned as 2580~2725K or 2725~2870K, the same can be accomplished for 3500K and 5500K as well but shall be withdifferent price. 2200K is also available upon request.
Genral Specification
Storage Micro-SDXC 64GBRecording time is about 5-10 days (recording time depends on the recording environment)
Network
Interface 802.11b/g/n
Range Up to 10 meters
Wireless Security WPA, WPA2, WPA+WPA2 Password protected access
Video
Compression format H.264
Image sensor HD 1/3" 3M progressive scan CMOS sensor, 2 Megapixel
Board Lens 5M Fisheye
fixed focus Fixed Focal Length 1.0mm/ F2.2
Resolution 1280 X 1024
Max. Frame Max. 30fps at 1280x1024
Maximum FOV (Field of View) 360° panorama : 180°(diagonal)/180°(vertical)/ 180° (horizontal)
Motion Detection Three-zone for detection, sensitivity Adjustable
Sensor/Control
Light Sensor Build-in Ambient Light Sensor
Lighting Control Support APP for Light Control
Audio
Audio Capability Built-in Microphone
Device Specification
3
仕樣
V series IP C.M. LampRev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
IP C.M. Lamp Connection Mode
P2P (peer-to-peer) connection is to exchange information between peers and without the need to go through a middle server.Through this type of connection mode, the device and user can exchange information directly without a middle server to increase security and to ensure the information can be protected.
4Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp
Overview of APP
Connection status
Device Connection
Connect the device to the Router.
Turn off the power before installation, gently twist the devise into the socket and turn on the power.Device will light up within 45 seconds to complete initialization; the devise will flash one time and brightness adjusted to 50% of the total light output and to be ready to use.
ConnectedConnecting
Not connected
Record Options
Default setting in off. Adjust the recording options based on your needs.Video saved in [Record List]
Record type ● Off(Default) ●Fulltime ● Event
Video Overview
Look up the saved video anytimeSearch by date (each video is 5 mins)
5Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp
Overview of APP
Brightness adjustment
ON/OFF control, 0-100% brightness adjustment.
Viewing angle adjustment
Multiple-Angle
Viewing angle adjustment
Flip vertically360∘
360∘
Fisheye mode
Panorama VR mode
Split mode
Snapshot / on time recording
Instant monitor, snapshot and watch recording.(Files will be saved in your smart device)
Flip
6
Please keep the QR code for future re-configuration
IP C.M. LAMP QRCODE
Place
1111
00123A
Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp
Overview of APP
Push Nofications
Sensor light
CM Lamp time setting
When IP C.M. Lamp detects any motion,App will send push notification, user can watch the scene of home immediately.
Under the mode of Sensor Light on (light off and night light off ),when the CM Lamp detcects object,sensor light will be triggered , and light will be turn on, and then light will be turned off automatically after 5 mins.
While CM Lamp connects to internet, video will show the time as user’s locating time zone.
While CM Lamp does not connect to internet,video will follow the time of smart phone.
[setting] -[Unit detail]-[Record type]choose [Event]
Notification function shows SSID
[setting] -[sensor Light Setting] -[ON]
7Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp
Overview of APP
Video download
Night light setting
Each video is 5 mins, you can download the specific period of r ecording
ClickChoose the video you wantClickIt take 2 mins to download each videoDo not close the APP between While downloadingIt will show " video is saved " after download successful.”
When the light turn off and the Ambient light less than 6lx,Nightlight will turn onautomatic.According to the local time zone at 7:00 AM, the night light will turn off automatically,and will turn on while the ambient light less than 6lux .
2D Drawing
V series IP C.M. Lamp
Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw
Product Packing C.M. Lamp
Lamp body material Dimension (mm)- Ø:80mmNet Weight (g):
COVER:PC
CAMERA:Fisheye lens
HEAT SINK:Aluminum
BASE:NPB
Base: E27Net Weight (g): 495
No sealed fixtures Not for outdoor fixtures
Luminaire NoticeThe LED Lamp is not compatible with all luminaires for halogen lamps. Before installation, please read following guidelines:-No sealed fixtures.-Not for outdoor fixtures.-Not for wet environment.
Ø80
142
Step 1 Step 2
Gife Box 1Pc of Lamp Outerior Box 10 gift BoxesDimensions(mm) L: 146*W:85* H:222 Dimensions(mm) L:449*W:240*H:314
9Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp
Safety Label & Warning• Do not cover lamp with paper, fabric, or any flammable material to avoid burning.• Working Environmental Temperature: -10 ~ +40°• Do not insert metal objects into the gap of lamp base.• The appropriate combination of lamp and lamp base should be carefully selected for different voltage and wattage.• Do not use in high-humidity environment or near water to avoid damage. (Except B.L.T.C. Outdoor IP65 version)• Not suitable for use in automatic light sensor system, emergency lighting fixture and mercury fixture to avoid damage and burning.• Do not use near flammable objects such as gasoline, spray, chemicals, paints, oil…etc.• Do not use in place that is likely to be impacted by force or vibration.• Do not use in acidic environment.• Please turn the light off when installing or cleaning to avoid electrical shock.• Please handle with care to avoid damage and collision.• Do not touch any powered-on lamps or lamps that have just been turned off to avoid burning.• Please ensure the lamp is tightly installed into the socket to avoid dropping.• Please select the appropriate fixture based on lamp size and weight.
General Guideline• Please use power supply 100~240V, Frequency 50/60 Hz for the product.• Slight difference of color temperature and brightness is likely to occur for the same part number due to the difference of LED chips.• Brightness, color temperature, and light distribution may vary with different types of bulbs.• To avoid heat build-up and the shortening of product lifetime, sealed fixture is not recommended.• Keep the lamp away from radio, video and television for a distance of 1 meter to avoid noise caused by interference.• Do not install lamp in heal insulated fixture.• Do not disassemble or reconstruct the lamp.• Do not stare directly at the lamp to avoid eye injury.• The light distribution may vary with different type of fixtures.• Do not wash the lamp with water.• Do not use the lamp outdoor if it is not marked as IP65.• To avoid damage and poor insulation, do not use the lamp near water or in frosted environment if it is not marked as IP65.• For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to
the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.