gvm: 4,5oo – 1o,4ookg gcm: 6,ooo – 16,oookg coose …isuzu australia limited abn 97 006 962 572...

†From delivery. ^Extended Warranty available at extra cost. Conditions apply. Note: The above chart is a brief representation of the chassis specifications within the Isuzu Tipper model range which may change from time to time. For the latest and a detailed understanding of the model and specification variants, please refer to the applicable Isuzu model Specification Sheet.

CHOOSE THE ONE WITH LOADS OF FEATURES

WARRANTIES†

MODEL VEHICLE/ENGINECABIN PERFORATION

CORROSION EXTENDED WARRANTY OPTIONS^

All N Series 3 years or 100,000 kilometres or 2,000 hours 3 years unlimited kilometres 4 years or 200,000

kilometres 5 years or 250,000


kilometres

All F Series 3 years or 150,000 kilometres or 2,500 hours 3 years unlimited kilometres 4 years or 250,000

kilometres5 years or 300,000


kilometres

NLR 200/275 NPR 200/275 NPR 300 NPR 300 NQR 450 FRR 500

SPECIFICATIONS

MODELGVM (kg)

GCM (kg)

ENGINEPOWER

(kW@RPM)TORQUE

(Nm@RPM)TRANSMISSION(GEARS/TYPE)

WHEELBASE (mm)

TIPPER VOLUME

(m3)

NLR 200 4,500 7,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0

NLS 200 AWD 4,5006,000 (off-road) 7,000 (on-road)

SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,740 2.0


NPR 200 / 275 4,500 / 5,500 8,000 / 9,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 5 speed manual Short: 2,765 2.0

NPR 3006,500 10,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 6 speed manual

Medium: 3,365 3.0

Crew Long: 4,175 2.8

NQR 450 8,700 12,200 SiTEC III 185 139 @ 2,600 510 @ 1,600 - 2,600 6 speed AMT Medium: 3,365 3.6

FRR 500 10,400 16,000 SiTEC III 205 151 @ 2,600 637 @ 1,6006 speed manual Medium: 3,784

3.86 speed AMT Medium: 3,784

TIPPERS

GVM: 4,5OO – 1O,4OOKG GCM: 6,OOO – 1 6,OOOKG

www.isuzu.com.au

TIC: Isuzu is a member of the Truck Industry Council – Safer Greener Essential. Isuzu Australia Limited ABN 97 006 962 572 (“IAL”). The information in this brochure was correct at time of printing, but all measurements, specifications and equipment are subject to change without notice. Some equipment may have been changed and/or is available at extra cost. IAL may make changes at any time without notice, in prices, colours, materials, equipment and models. IAL makes all reasonable attempts to ensure the availability of all vehicles and equipment. The information in this brochure is general in nature. Your Isuzu Truck Dealer can confirm all measurements, specifications and vehicle/equipment availability upon request. Any body illustrated is not standard equipment. APR2011 F•S•A/ISZ6903

*T-Mark Industry Reports. ^On selected models.

THE ONE

Australia’s number one truck company* is proud

to present a range of eight ready-to-work tipper models

from 4,500kg GVM and 2.0 cubic metres load capacity

through to 10,400kg GVM and 3.8 cubic meters.

Based on the class-leading N and F Series there

are eight individual models to select from.

And even though each is specified to match

different applications, they share many common

features including outstanding levels of driver comfort,

class-leading safety features and impressive on-road

performance from the new Isuzu SiTEC Series III engines.

Starting at the business end, the Isuzu ready-to-

work tippers are fully manufactured in Japan.

The all-steel ShinMaywa tipper bodies are match-

specified to the Isuzu cab-chassis and include a

number of sensible and tried-on-the-job features such

as a full 3.2mm all steel deck plate construction, fast

20 second up and 20 second down hydraulic hoist

operation, auto release and 2-way tailgate, shovel

rack and more. Importantly, the Isuzu cab-chassis

and the tipper bodies come together as one in the Isuzu

manufacturing process to ensure that everything from

the hydraulics to the lighting and electronics to the

in-cab operation of the tipper works as it should.

Isuzu’s experience in the tipper market has

resulted in this range of eight models covering the

payload needs of the majority of applications and now

extends to the release of the NLS 200 4x4, an all

wheel drive, narrow cab, 2.0 cubic metre model that’s

perfect for getting on and off sites where limited 2 wheel

drive traction becomes problematic to say the least!

Moving forward these N and F Series, offer bigger

doors, longer handles, and 90° opening. Inside each

cab there’s room to move and comfort is ergonomically

designed. It’s a great way to work.

THE ONE FOR COMFORT AND SAFETY

Sit at the controls of an Isuzu tipper and you’ll see

it’s packed with features – from innovative ideas like

the 13cm colour ‘infotainment system’ to creature

comforts such as drink holders and capacious storage

compartments.

And while it’s a pleasure to drive an Isuzu, it’s also

safer. Anti-lock Braking System (ABS) and Anti-Slip

Regulator/Traction Control (ASR) are standard on all

models. As you’d expect, a driver’s SRS airbag is

standard across the range. NPR and NQR models are

also equipped with a passenger airbag.

THE ONE FOR THE ENVIRONMENT

Isuzu’s SiTEC Series III diesels are economical,

lightweight and compact, providing significantly more

power and torque than before. More importantly, they

are Euro V compliant which means you’ll not only

be delivering a load to your customers but making

a statement regarding the minimal impact your

truck is having on the environment compared to all

the older trucks still around today.

The engines have overhead camshafts with

four valves per cylinder, the latest high-pressure

common rail injection system, Advanced Cooled

Exhaust Gas Recirculation (EGR) systems, a Diesel

Particulate Diffuser (DPD) exhaust and much more.

Which all adds up to more power, improved

economy and lower emissions: easily the best

combination available.

THE ONE FOR SUPPORT

Isuzu Care is the most comprehensive customer

care program ever seen in the Australian truck

market, offering truck buyers and owners a suite of

innovative support services. A good example of

this is the peace of mind offered by Isuzu Assist

(Freecall 1800 947 898), the industry-leading roadside

assistance program that’s standard for all Isuzu trucks

for a period of 3 years from the date of delivery.

Add the in-house Customer Care Centre

(Freecall 1800 035 640) and you can rest assured

that operating an Isuzu is an extremely positive

experience for owners and drivers alike.

1OOOs OF LOADS

1 TIPPER

Two-way opening tailgate with auto release.̂ Two-way opening tailgate with auto release.̂

Auto release body lockdown hook. In cab tipper control.Factory steel ShinMaywa body 20sec raise / 20sec lower time.

Spacious and well-appointed cab interior. NPR 300 Crew Cab pictured.

†From delivery. ^Extended Warranty available at extra cost. Conditions apply. Note: The above chart is a brief representation of the chassis specifications within the Isuzu Tipper model range which may change from time to time. For the latest and a detailed understanding of the model and specification variants, please refer to the applicable Isuzu model Specification Sheet.

CHOOSE THE ONE WITH LOADS OF FEATURES

WARRANTIES†

MODEL VEHICLE/ENGINECABIN PERFORATION

CORROSION EXTENDED WARRANTY OPTIONS^

All N Series 3 years or 100,000 kilometres or 2,000 hours 3 years unlimited kilometres 4 years or 200,000



kilometres

All F Series 3 years or 150,000 kilometres or 2,500 hours 3 years unlimited kilometres 4 years or 250,000



kilometres

NLR 200/275 NPR 200/275 NPR 300 NPR 300 NQR 450 FRR 500

SPECIFICATIONS

MODELGVM (kg)

GCM (kg)

ENGINEPOWER

(kW@RPM)TORQUE

(Nm@RPM)TRANSMISSION(GEARS/TYPE)

WHEELBASE (mm)

TIPPER VOLUME

(m3)


NLS 200 AWD 4,5006,000 (off-road) 7,000 (on-road)

SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,740 2.0


NPR 200 / 275 4,500 / 5,500 8,000 / 9,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 5 speed manual Short: 2,765 2.0

NPR 3006,500 10,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 6 speed manual

Medium: 3,365 3.0

Crew Long: 4,175 2.8

NQR 450 8,700 12,200 SiTEC III 185 139 @ 2,600 510 @ 1,600 - 2,600 6 speed AMT Medium: 3,365 3.6

FRR 500 10,400 16,000 SiTEC III 205 151 @ 2,600 637 @ 1,6006 speed manual Medium: 3,784

3.86 speed AMT Medium: 3,784

TIPPERS

GVM: 4,5OO – 1O,4OOKG GCM: 6,OOO – 1 6,OOOKG

www.isuzu.com.au

TIC: Isuzu is a member of the Truck Industry Council – Safer Greener Essential. Isuzu Australia Limited ABN 97 006 962 572 (“IAL”). The information in this brochure was correct at time of printing, but all measurements, specifications and equipment are subject to change without notice. Some equipment may have been changed and/or is available at extra cost. IAL may make changes at any time without notice, in prices, colours, materials, equipment and models. IAL makes all reasonable attempts to ensure the availability of all vehicles and equipment. The information in this brochure is general in nature. Your Isuzu Truck Dealer can confirm all measurements, specifications and vehicle/equipment availability upon request. Any body illustrated is not standard equipment. APR2011 F•S•A/ISZ6903

gvm: 4,5oo – 1o,4ookg gcm: 6,ooo – 16,oookg coose …isuzu australia limited abn 97 006 962 572...

Documents