gunnebo barrier optistile...2va 345va input for voltage free contact 41 f to + 104 f rh 95%...
TRANSCRIPT
Gunnebo Barrier OptiStileH-Sense Series
Barrier Speed Gate for Internal Installation with Integrated H-Sense Infection Control Solutions
Barrier Speed Gate for Internal InstallationIntegrated H-Sense Infection Control Solutions
Versatille and timeless award-winning design. Silent andsmooth in operation, Gunnebo OptiStile Speed Gates are available in two models featuring integrated infection control solutions:
The H-Sense model features an integrated camera, infrared sensor and display with hygienic mask detection and user temperature check to deny entry to users if unprotected or showing signs of fever.
In addition to the integrated camera and infrared sensor, the H-Sense+ model incorporates a pole-mounted sanitizer gel dispenser to ensure that the users’ hands have been hygienically cleansed before being granted passage.
Security FeaturesFraud Detection through Sophisticated and Proven Algorithm
Intrusion
Tailgating
Piggybacking
Wrong way detection
Leave aisle timeout
Tailgating and piggybacking detection
Wrong way and intrusion detection
Mode of OperationSwinging Barrier Glass or Arms
Normally ClosedPassage in one or both directions is electronically controlled. On receiving a signal from the access control system, or remote control, the barriers open (Normally Closed / NC). If an unauthorized person tries to
tailgate or attempts to enter from the opposite direction, the built-in alarm system is activated. If within the pre-set timeout no passage has occurred, the lane will close and reset.
Illuminated Symbols
Steady light = Normal useFlashing light = Alarm conditions
Green CardSteady: Rest mode. Present card to the reader for authorization.
Flashing: Incorrect use, re-present card to the reader for authorization.
Green ArrowSteady: Authorized use or designated free passage Proceed through the unit.
Flashing: Emergency / Fire exit.
Red CrossSteady: Unit in use or no passage. Passage not authorized.
Flashing: Alarm, fraudulent condition, or technical alarm.
2.0" diameter LED display pictogram as standard flush-mounted within the top inlays, with illuminated symbols.
Design / ConstructionAvailable versions are the H-Sense with integrated camera and infrared sensor, and the H-Sense+ with integrated camera and infrared sensor plus sanitizer gel dispenser, both in stainless steel and glass finish. Available cabinet design construction (for both versions):
OptiStile 720 cabinet lengths: 42.0" / 48.0" / 60.0" / 72.0"OptiStile 220 cabinet lengths: 42.0" / 48.0" / 60.0" / 72.0"
Standard passage way (28.0") and wide passage(36.0") available. Available also as a combination of centercabinet with narrow (28.0") passage in one side and wide (36.0") passage on the other side.
Safety Features
Accurate presence sensing
Emitter/receiver infrared sensors technology
Logic voltage 24 Vac
Voltage free contact input for Fire Alarm fail state
Wide walkway for wheelchair or easier access
Accompanied wheelchair or child passage management
For security and safety reasons children must be supervized by an adult at all times in the vicinity of an active lane. Any child being escorted through the lane must always precede the accompanying adult during passage.
Gunnebo OptiStile 220 with integrated H-Sense+ infection control solution. For Gunnebo OptiStile 720 H-Sense+ integration, see front cover image.
Above left: H-Sense T infrared body temperature detection; above right: H-Sense M hygienic mask detection
H-Sense Infection Control FeaturesH-Sense is a family of access control solutions specifically designed to provide contactless and automated infection prevention and control functionalities, providing your building and its occupants with 3 levels of protection.
H-Sense T is designed to evaluate forehead temperature from a distance against an adjustable threshold, for general pre-screening purposes only. Establishment of a person’s temperature and/or health should only be done using an approved medical system used by qualified health professionals.
H-Sense T - Infrared Body Temperature Detection
H-Sense T’s 7" display pod seamlessly integrated on the turnstile, combines image analytics and thermal detection to deliver high precision, contactless body temperature detection with a measuring range from 86 - 113°F and a precision of ± 0.5°F.
One of the primary symptoms of individuals with an active infection is an elevated body temperature or fever. This temperature detection technology is synchronized with the gate operation, so the system will deny entry to individuals exhibiting an elevated body temperature above the normal range. This prevents the spread of such infections around your building at the point of entry.
H-Sense M - Hygienic Mask Detection
H-Sense M implements recommended infection prevention measures linked to the right of access. Located in a 7" display pod seamlessly integrated on the turnstile, a high precision camera, backed up by image analytics, recognizes if the user is wearing a hygienic mask or not.
Integrated to the turnstile functionality it provides the ability to deny passage if a mask is not identified, thereby screening employees and visitors to mitigate the risk of spreading airborne infectious particles around your building.
H-Sense G - Sanitizer Gel Dispenser
H-Sense G features an automatic sanitizer gel dispenser linked to the turnstile functions of the gate, with mounting pole and glass barrier, that will contactlessly administer a dose of hand sanitizer and will not allow entry unless sanitizer has been administered.
It is well documented that practising good hand hygiene is a critical factor in preventing the spread of infection, by minimizing the opportunity for infectious agents and pathogens to be deposited on hard surfaces like doors and windows, particularly in communal areas.
Options & Accessories
Alternative finishes and materials Remote control systems
Lift screen integrations Digital LCD counter
Pictogram Emergency break glass push button
Card reader integration
Electrical Data & Conditions of Use
Power SupplyPower Rating
(Stand by)Power Rating (In Operation)
Fire SignalOperating
TemparatureIP Rating Noise Level
115Vac60Hz1 2VA 345VA
Input for voltagefree contact
41°F to + 104°F RH 95%
non-condensingIP20
Less than55dB2
1. 230Vac 50Hz also available on demand 2. Note: Average background noise in office environment is 50-55dB
Access SpecificationsFlow rates by type of reader1
Insertion type Swipe type Proximity type
20 Passages per minute 30 Passages per minute 40 Passages per minute
1. Approximate figures.
Accessibility for Standard (28.0") vs. Wide (36.0") models
Plain dot indicates the functionality is implemented, empty dot indicates some limitations, no dot indicates notavailable. Emergency egress functionality implemented as standard.
550mm
900mm
Disabled Access: 36.0" net passage way and algorithm able to manage wheelchair access.
28.0"
36.0"
Take advantage of our knowledge:www.gunneboentrancesecurity.com
A
B
C
Dimensions
Passage WidthA
Cabinet HeightB
Cabinet LengthC
Cabinet Width
Standard 720 lane 28.0 39.4 42.0 / 48.0 / 60.0 / 72.0 6.5
Wide 720 lane 36.0 39.4 42.0 / 48.0 / 60.0 / 72.0 6.5
Standard 220 lane 28.0 37.7 42.0 / 48.0 / 60.0 / 72.0 6.5
Wide 220 lane 36.0 37.7 42.0 / 48.0 / 60.0 / 72.0 6.5
Dimensions in inches. Might require lifting equipment. For details refer to installation detail drawings.
Installation & Maintenance
Product Delivery
ApplicationSite
Preparation1
Cabling & Conduits2
Control Board
Location
Systems Integration5
Systems Integration5
Maintenance Access MTTR3 MCBF4
Fully Assembled
IndoorFlat & level
finished floor +/- 0.2"
Through the ground
In master OptiStile cabinet
27 digital interface
I/O RS232 RS485
Settings programable
via parameters
Through lateral panels
Less than 30 minutes
4 million
1. Bolting depth MIN 2.8" concrete MIN 2.2 tons/in² resistance, MIN 278.7” x 19.9" x 5.9" deep. 2. Running MIN 5.5" below finished floor level, should rise MIN 2.0" from foundation. 3. Mean time to repair. 4. Mean cycle between failure. 5. Potential free contact for card reader input.
It is the customer’s responsibility to ensure the structural integrity and strength of the installation location.Data provided is for information only, please refer to your usual Gunnebo Customer Service contact in order to prepare the installation site.