gullco ovens
DESCRIPTION
Range of process ovens for weldingTRANSCRIPT
®
TEST/DATA SPECIFICATIONS
Maintains electrodes fromthe holding oven belowAWS and ASME allowablemoisture levels for morethan 24 hours.
Slide ejector dispenseselectrodes one at a timewhile maintaining moisture-free electrode quality.
Entirely portable. Does notrequire power. No restrictiveextension cords. Use any-where.
Electrode moisture absorption between ovenstorage and welding has long been recognizedas the cause of high levels of hydrogen in theweld metal and costly weld rejects/failures. TheGullco Dry Pack provides an effective, affordableand thoroughly proven solution to this problem
in the form of an entirely portable, self-seal moisture-resistant electrode dispenser. Take a moment to check the features above and the performance/ size data on the reverse of this sheet ...then contact Gullco or your distributorand put Dry Pak dispensers to work in your operations.
DRY PAKDRY PAKEXTENDED MOISTURE CONTROL WELD ELECTRODE DISPENSER
®
Patent No.Canada - 1121320U.S.A. - 4266690
EXTENDSQUALITYCONTROL FORELECTRODES!
DISPENSESELECTRODESONE AT A TIME!
DOES NOT NEEDPOWER...USE
ANYWHERE!
BULLETIN GDP-0904 Campion
Distributed by
PRINTED IN CANADA
Website: www.gullco.comGULLCO INTERNATIONAL LIMITED - CANADA
Phone: 905-953-4140 Fax: 905-953-4138 e-mail: [email protected]
G U L L C O I N T E R N AT I O N A L I N C . - U . S . A .Phone: 440-439-8333 Fax: 440-439-3634 e-mail: [email protected]
GULLCO INTERNATIONAL [U.K.] LIMITED - EUROPEPhone: +44 (0) 1257-253579 Fax: +44 (0) 1257-254629 e-mail: [email protected]
GULLCO INTERNATIONAL PTY LIMITED - AUSTRALIAPhone: 61 (0) 7 5496-9555 Fax: 61 (0) 7 5496-9522 e-mail: [email protected]
G U L L C O I N T E R N AT I O N A L L I M I T E D - I N D I ATelefax: 91 (0) 20-24272212 Fax: 91 (0) 20-26120802 e-mail: [email protected]
GULLCO INTERNATIONAL SHANGHAI LIMITEDPhone: +8621-50460341 Fax: +8621-50463554 e-mail: [email protected]
EXTENDED MOISTURE CONTROL WELD ELECTRODE DISPENSER
12300
31.36
1-1/2 x 1238 x 305
1.8 .84
20.59.3
7 x 12-1/2 x 21178 x 317 x 533
14350
31.36
1-1/2 x 1438 x 356
1.5.68198.6
7 x 12-1/2 x 21178 x 317 x 533
18450
41.81
1-1/2 x 1838 x 475
1.6.73
20.59.3
7 x 12-1/2 x 25178 x 317 x 635
Note:All Gullco DryPak componentsare compatiblewith TED ®
INSERT (Part DP-188-21) Converts Model DP-188-14 to accommodate 12” (300 mm) electrodes
DRY PAKDRY PAK ®
TESTS PROVE THAT GULLCO DRY PAKDISPENSERS MAINTAIN ELECTRODESBELOW AWS AND ASME CODE REQUIREMENTS FOR MORE THAN 24HOURS!
Normal absorption of moisture for electrodesexposed to high relative humidities is excessive,necessitating strict moisture control procedures.
The maximum electrode coating moisture contentallowed by AWS ranges from 0.4% H20 by weightdown to 0.2% depending on the strength of the basematerial.
The results of tests applied to the Dry Pak moisturecontrol dispenser system are shown in the diagramat right.
It will be noted that maximum electrode coveringmoisture content values did not exceed 0.2% forE7018 electrodes held in a Dry Pak exposed to 80-90% relative humidity... even after 41 hours exposure!
2.0%
1.5%
1.0%
0.5%
0.4%
0.2%
0 10 17 20 24 30 40 41 50
ExposedElectrodes
MOISTURE IN ELECTRODE TESTwith E7018 Low Hydrogen Electrodeafter baking 1.5 hours @ 460˚ C.
Maximum moisture content forE7018 electrodes allowed byAWS Welding Code 0.4%
ELECTRODES HELD IN DRY PAK
Electrode Length
Capacity (approximate)
Chamber Size
Net Weight
Shipping Weight (Carton of 12)
Shipping Dimensions (Carton of 12)
in.mmlbs.kg.in.mm.lbs.kg.lbskginmm.
MODEL DP-188-12 DP-188-14 DP-188-18
KAT, MOGGY, KATBAK & SAM are registered trademarks of Gullco Enterprises Limited SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
EXPOSURE TIME AT 80%-90% RELATIVE HUMIDITY (HOURS)
PE
RC
EN
T W
EIG
HT
IN
ELE
CT
RO
DE
CO
ATIN
G
®
compact, in-shop models
....and portables
ELECTRODESTABILIZING OVENS
Eliminate the risk of costly rework and rejects.
Ensure consistent physical properties and X-ray quality welds.
Protect Low Hydrogen quality in electrodes and flux-cored wire.
Protect coatings on Aluminum, Bronze, Cast Iron, Stainless andother electrodes....prevent electrode wastage.
SELECT FROM THE WORLD’S MOST COMPLETE RANGE OF ELECTR ODE STABILIZING OVENS
the portables....
Thermometer/Rod LifterAccessory
Model T10 - foruse with portableoven models 10 A-20and 10B-20... a twocompartment rod lifter withthermometer topmounted and protected.
For AddedProtection FromGround Damage
...The Gullco Model 10-RSOven Riser Stand raises allGullco 10 & 20 lb. portableovens 6 1/2” from the groundsurface adding to stability andprotection in extremelyadverse job site conditions.
They’re lightweight, rugged and completely portable...easy to load,easy to carry...ready to provide lowcost control of welding quality in theshop or in the field. Reduce operatingcosts by providing your welding operators with fast access toelectrodes at the point-of-work.There’s a model exactly suited to yourrequirements.
10 POUND CAPACITY PORTABLES
Model 10 A-20 Model 10 N-20 Nuclear
Operates from any 115 volt, AC/DC Operates on 115 volt, AC only. Hassource. Is equipped with rod lifter, two pilot lights and two thermostatspilot light and has 1” high false that maintain oven temperature inbottom to prevent moisture damage 100˚ to 400˚ F range. Equipped withto electric connections. Oven divided rod lifter with provision fortemperature, not controlled by thermometer - part 1029.thermostat, averages 275˚ F.Provides absolute electrode stabilitywhen used in conjunction withtemperature-controlled ovens.
Extended MoistureControl WeldElectrode Dispenser
Model 10 B-20
Operates on 115 volt, AC only. Hasrod lifter, pilot light, and thermostat that maintains oven temperature in100˚ F to 400˚ F range, providingindependent control of electrodewelding quality.
50 POUND CAPACITYPORTABLESMODEL 50
This handy portable oven, only 23” highand 11” in diameter, gives fast access to up to 50 lbs. of stabilized rods in theshop or in the field. It operates on 115volt, AC. Thermostatic control maintainsoven temperature in the 100˚ - 400˚ Frange. High performance/efficiencyfeatures include:
a full 2 inches of insulationsurrounds oven wall to preventheat loss.
central calrod element ensuresuniform distribution of heat inoven.
equipped with two separate rodlifters to give welding operator fastaccess to different sizes and typesof rods in oven.
Maintains electrodesfrom the holding oven below AWS and ASME allowable moisture levels for more than24 hours.
Dispenses electrodesone at a time.
Entirely portable.Does not requirepower.
Model 125125 POUND CAPACITY- for operation on 115
Volt, AC.
Model 350350 POUND CAPACITY - for operation on 115 Volt, AC.Also available: Model 350 A foroperation on 220/440 Volt, AC.
....and compact, in-shop models
Model 10001000 POUND CAPACITY - foroperation on 220/440 Volt, AC.
These Gullco Stabilizing Ovens havegained international recognition and acceptance based on a variety of qualityand performance features including....
Thermometer Accessory -
Model T23 - thermometer with a mounting bracket and screw for frontmounting on the Model 125 and 350ovens.
compact, modular design withcontrols recessed for protection.
shelves easily removed toaccommodate large size loads.
oven fully insulated to prevent heat loss....pilot light indicates ovenoperation.
thermostat control, incorporatingon/off switch, maintains oven temperature in 100˚ - 550˚ F range.
models 125 and 350 feature nestingfeet and sockets for safe, easystacking.
also from Gullco.... 1000 POUND CAPACITY HIGHTEMPERATURE ELECTRODERE-BAKING/STABILIZINGOVEN....available in two models - oneequipped with an Indicating Control System and the other with anElectronic Digital Programmer/Controller. Complete details are provided in Gullco Bulletin GHTO...available from Gullco or your Gullco distributor.
Compact...and
stackable!
SELECT FROM THE WORLD’S MOST COMPLETE RANGE OF ELECTR ODE STABILIZING OVENS
the portables....
Thermometer/Rod LifterAccessory
Model T10 - foruse with portableoven models 10 A-20and 10B-20... a twocompartment rod lifter withthermometer topmounted and protected.
For AddedProtection FromGround Damage
...The Gullco Model 10-RSOven Riser Stand raises allGullco 10 & 20 lb. portableovens 6 1/2” from the groundsurface adding to stability andprotection in extremelyadverse job site conditions.
They’re lightweight, rugged and completely portable...easy to load,easy to carry...ready to provide lowcost control of welding quality in theshop or in the field. Reduce operatingcosts by providing your welding operators with fast access toelectrodes at the point-of-work.There’s a model exactly suited to yourrequirements.
10 POUND CAPACITY PORTABLES
Model 10 A-20 Model 10 N-20 Nuclear
Operates from any 115 volt, AC/DC Operates on 115 volt, AC only. Hassource. Is equipped with rod lifter, two pilot lights and two thermostatspilot light and has 1” high false that maintain oven temperature inbottom to prevent moisture damage 100˚ to 400˚ F range. Equipped withto electric connections. Oven divided rod lifter with provision fortemperature, not controlled by thermometer - part 1029.thermostat, averages 275˚ F.Provides absolute electrode stabilitywhen used in conjunction withtemperature-controlled ovens.
Extended MoistureControl WeldElectrode Dispenser
Model 10 B-20
Operates on 115 volt, AC only. Hasrod lifter, pilot light, and thermostat that maintains oven temperature in100˚ F to 400˚ F range, providingindependent control of electrodewelding quality.
50 POUND CAPACITYPORTABLESMODEL 50
This handy portable oven, only 23” highand 11” in diameter, gives fast access to up to 50 lbs. of stabilized rods in theshop or in the field. It operates on 115volt, AC. Thermostatic control maintainsoven temperature in the 100˚ - 400˚ Frange. High performance/efficiencyfeatures include:
a full 2 inches of insulationsurrounds oven wall to preventheat loss.
central calrod element ensuresuniform distribution of heat inoven.
equipped with two separate rodlifters to give welding operator fastaccess to different sizes and typesof rods in oven.
Maintains electrodesfrom the holding oven below AWS and ASME allowable moisture levels for more than24 hours.
Dispenses electrodesone at a time.
Entirely portable.Does not requirepower.
Model 125125 POUND CAPACITY- for operation on 115
Volt, AC.
Model 350350 POUND CAPACITY - for operation on 115 Volt, AC.Also available: Model 350 A foroperation on 220/440 Volt, AC.
....and compact, in-shop models
Model 10001000 POUND CAPACITY - foroperation on 220/440 Volt, AC.
These Gullco Stabilizing Ovens havegained international recognition and acceptance based on a variety of qualityand performance features including....
Thermometer Accessory -
Model T23 - thermometer with a mounting bracket and screw for frontmounting on the Model 125 and 350ovens.
compact, modular design withcontrols recessed for protection.
shelves easily removed toaccommodate large size loads.
oven fully insulated to prevent heat loss....pilot light indicates ovenoperation.
thermostat control, incorporatingon/off switch, maintains oven temperature in 100˚ - 550˚ F range.
models 125 and 350 feature nestingfeet and sockets for safe, easystacking.
also from Gullco.... 1000 POUND CAPACITY HIGHTEMPERATURE ELECTRODERE-BAKING/STABILIZINGOVEN....available in two models - oneequipped with an Indicating Control System and the other with anElectronic Digital Programmer/Controller. Complete details are provided in Gullco Bulletin GHTO...available from Gullco or your Gullco distributor.
Compact...and
stackable!
BULLETIN GOV 2/03 Campion PRINTED IN CANADA
Capacity 10 to 20 lbs 50 to 70 lbs.
Outside Dimensions 7” dia. x 23” high 11”dia. x 23” high
Inside Dimensions 3” dia. x 19” high 7” dia. x 19” high
Unit Weight (approx.) 14 lbs. 32 lbs.
Electrode Size up to 18” up to 18”
Line Cord 3 wire - 8 ft. 3 wire- 8 ft.
Element 100 W - 115 Volt 125 W - 115 Volt 300 W - 115 Volt 300 W - 115 Volt
Thermostat No Yes Yes (2) Yes
Pilot Light Yes Yes
Temp. Range Av. 275˚ F 100˚- 400˚ F 100˚- 400˚ F
Door Latch Lift Lid Lift Lid
Stacking No No
125 to 175 lbs. 350 to 400 lbs. Sixteen 12” Spools/1000 lbs.
16”h x 16” w x 24 1/2”d 22”h x 22”w x 241/2” d 39 3/4”h x 30 1/4”w x 30 3/4”d
81/4”h x 9 3/4”w x 19”d 14”h x 16”w x 19”d 24”h x 21 3/4”w x 24”d
58 lbs 105 lbs. 330 lbs.
up to 18” up to 18” up to 24”
3 wire - 8 ft. 3 wire - 8 ft. None None
1000 W - 115 V 1500 W - 115 V 1500 W-220/440 V 3000 W - 220/440 V- 1 Phase
Yes Yes Yes
Yes Yes Yes
100˚ - 550˚ F 100˚ - 550˚ F 100˚ - 550˚ F
Push/Pull Push/Pull Push/Pull
Yes Yes Yes
10 A-20 10 B-20 10 N-20 50 125 350 350A 1000PORTABLE OVENS COMPACT IN-SHOP MODELS
ELECTRODE STABILIZING OVENS
SPECIFICATIONS
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICENote: Weight capacity depends on electrode length.
and f or flux conditioning and contr ol...GULLCO
flux hopper sand holding o vens
The 100 lb. capacity hopper and 600 lb. capacityholding oven illustrated at right are just part of a complete range of flux conditioning/control unitsavailable from Gullco. All are equipped with lowwatt density elements to maintain uniformtemperature through the flux load...all aredesigned to assure that the most stringent fluxspecifications are maintained. Complete details are provided in Gullco Bulletin GHO. Bulletins arereadily available from Gullco or your Gullco distributor.
DISTRIBUTED BY:Website: www.gullco.com
GULLCO INTERNATIONAL LIMITED - CANADAPhone: 905-953-4140 Fax: 905-953-4138 e-mail: [email protected]
G U L L C O I N T E R N A T I O N A L I N C . - U . S . A .Phone: 440-439-8333 Fax: 440-439-3634 e-mail: [email protected]
GULLCO INTERNATIONAL [U.K.] LIMITED - EUROPEPhone: +44 (0) 1257-253579 Fax: +44 (0) 1257-254629 e-mail: [email protected]
GULLCO INTERNATIONAL PTY LIMITED - AUSTRALIAPhone: 61 (0) 7 5496-9555 Fax: 61 (0) 7 5496-9522 e-mail: [email protected]
G U L L C O I N T E R N A T I O N A L L I M I T E D - I N D I ATelefax: 91 (0) 20-4272212 Fax: 91 (0) 20-6120802 e-mail: [email protected]
GULLCO INTERNATIONAL SHANGHAI LIMITEDPhone: +8621-50460341 Fax: +8621-50463554 e-mail: [email protected]
®
FROM GULLCO....A FLUX CONDITIONING/CONTROLUNIT EXACTLY SUITED TO YOUR REQUIREMENTS...AND THE ASSURANCE THAT THE MOST STRINGENTFLUX SPECIFICATIONS ARE BEING MAINTAINED.
Flux Hoppers
Flux Holding Ovens
and Flux Rebake Ovens
FOR SUBMERGED ARC WELDING OPERATIONS
Flux Hopper s and Flux Holding Ovens Assure Flux Specifications Are Maintained
200 LB. HOLDING OVEN
Model GO V 200 FD - This insulated 200 lb. capacityFlux Holding Oven is generally located in the stor-age area and is used to keep the flux in its dry stateor to dry out flux that has picked up moisture. It iscomplete with lifting lugs, and hinged loading lid,thermometer and a flux heating system incorporat-ing 1500 watts of low density elements.Temperature controlled by thermostat. Temperaturerange 100˚ to 550˚ F. All for operation on 115 volts,50/60 cycle AC power supply. Weight 155 lbs.
600 LB. HOLDING OVEN
Model GO V 600 FD3 - This fully insulated 600 lb.capacity Flux Oven incorporates three (3) individual200 lb. hoppers, enabling up to three (3) differenttypes of flux to be stored and dried simultaneously.It is complete with three (3) hinged loading lids, lift-ing lugs, three (3) individual thermometers and aflux heating system incorporating 4,500 watts oflow density elements. Temperature is controlled bythree (3) individual thermostats so that each hop-per is individually controlled. Temperature range100˚ to 550˚ F. All for operation on 220 volt, singlephase AC power supply. Weight 250 lbs.
Model GOV 600 FDH -This fully insulated 600 lb.
capacity high temperature Flux Rebake Oven is similar in design to the aboveModel GOV 600 FD3, except incorporating high temperature insulation, hightemperature wiring and the flux heating system which incorporates 11,400watts of low density elements. Temperature range 100˚ to 850˚ F. Each hop-per controlled by an individual thermostat to provide individual temperaturecontrol. All for operation on 220, 440 or 575 volts, 3 phase power supply.Weight 350 lbs.
Note: All above Ovens can be supplied for operation on 220 volts or440 volts, single phase power supply. Please consult factory.
600 LB. FLUX REBAKE OVEN
Note: Voltage must be specified at time of placing order.
24"20"
54"
54"
42" 24"
Model GOV100 PFD - Thisportable 100 lb.capacity FluxHolding Ovenuses the sameflux hopper asModel GOV 100FH except issupplied com-plete withportable carrier, a 25 lb. capacity flux bucket fortransfer of the flux to the welding head. Fluxbucket gravity feed from a positive lever typevalve at the base of the Hopper. The 100lb.Hopper can be readilydetached from itsportable carrier andmounted directly abovethe welding head or onthe welding manipula-tor. All for operation on115 volts, 50/60 cycleAC power supply.Weight 50 lbs.
100 LB. PORTABLE HOLDING O VEN
Flux Holding Ovens100 LB. HOPPER
Flux Hopper s
Model GO V 100 FH -This 100 lb. Capacity FluxHopper is designed formounting either directlyabove the welding heador on the welding manip-ulator to maintain the fluxin its original dry state. Itis complete with mount-ing lugs, lift-off loadinglid, thermometer, fluxlevel window, flux screenand a flux heating systemincorporating 40 watts oflow density elements.Temperature controlled bythermostat. Temperaturerange 100˚ to 400˚F. All foroperation on 115 volts, 50/60cycle AC power supply.Weight 27 lbs.
All Gullco Flux Hopper s and Holding Ovens Utiliz e Low Watt Density Elements to Maintain Unif orm Temperature Thr oughout the Flux Load
22 1/2”
11” 13”
SUBMERGED ARC MOGGY
Model GM-02- This unit can beequipped to produce precision,qualitysubmerged arc or MIG welds. It is guidedby adjustable horizontal guideroller assemblies which maintain aset distance from a vertical mem-ber or a unique optional “handled”steering device. The unit comescomplete with a removable attach-ment post that holds a wire feedhead, flux hopper & valve (sub-merged arc unit only), wire spool,controls and adjustable weld posi-tioning brackets with horizontal and vertical slides thatenable full positioning of the weld gun either behind orbeside the carriage. See Gullco Bulletin SAM-01 forcomplete details.
”
”
Flux Hopper s and Flux Holding Ovens Assure Flux Specifications Are Maintained
200 LB. HOLDING OVEN
Model GO V 200 FD - This insulated 200 lb. capacityFlux Holding Oven is generally located in the stor-age area and is used to keep the flux in its dry stateor to dry out flux that has picked up moisture. It iscomplete with lifting lugs, and hinged loading lid,thermometer and a flux heating system incorporat-ing 1500 watts of low density elements.Temperature controlled by thermostat. Temperaturerange 100˚ to 550˚ F. All for operation on 115 volts,50/60 cycle AC power supply. Weight 155 lbs.
600 LB. HOLDING OVEN
Model GO V 600 FD3 - This fully insulated 600 lb.capacity Flux Oven incorporates three (3) individual200 lb. hoppers, enabling up to three (3) differenttypes of flux to be stored and dried simultaneously.It is complete with three (3) hinged loading lids, lift-ing lugs, three (3) individual thermometers and aflux heating system incorporating 4,500 watts oflow density elements. Temperature is controlled bythree (3) individual thermostats so that each hop-per is individually controlled. Temperature range100˚ to 550˚ F. All for operation on 220 volt, singlephase AC power supply. Weight 250 lbs.
Model GOV 600 FDH -This fully insulated 600 lb.
capacity high temperature Flux Rebake Oven is similar in design to the aboveModel GOV 600 FD3, except incorporating high temperature insulation, hightemperature wiring and the flux heating system which incorporates 11,400watts of low density elements. Temperature range 100˚ to 850˚ F. Each hop-per controlled by an individual thermostat to provide individual temperaturecontrol. All for operation on 220, 440 or 575 volts, 3 phase power supply.Weight 350 lbs.
Note: All above Ovens can be supplied for operation on 220 volts or440 volts, single phase power supply. Please consult factory.
600 LB. FLUX REBAKE OVEN
Note: Voltage must be specified at time of placing order.
24"20"
54"
54"
42" 24"
Model GOV100 PFD - Thisportable 100 lb.capacity FluxHolding Ovenuses the sameflux hopper asModel GOV 100FH except issupplied com-plete withportable carrier, a 25 lb. capacity flux bucket fortransfer of the flux to the welding head. Fluxbucket gravity feed from a positive lever typevalve at the base of the Hopper. The 100lb.Hopper can be readilydetached from itsportable carrier andmounted directly abovethe welding head or onthe welding manipula-tor. All for operation on115 volts, 50/60 cycleAC power supply.Weight 50 lbs.
100 LB. PORTABLE HOLDING O VEN
Flux Holding Ovens100 LB. HOPPER
Flux Hopper s
Model GO V 100 FH -This 100 lb. Capacity FluxHopper is designed formounting either directlyabove the welding heador on the welding manip-ulator to maintain the fluxin its original dry state. Itis complete with mount-ing lugs, lift-off loadinglid, thermometer, fluxlevel window, flux screenand a flux heating systemincorporating 40 watts oflow density elements.Temperature controlled bythermostat. Temperaturerange 100˚ to 400˚F. All foroperation on 115 volts, 50/60cycle AC power supply.Weight 27 lbs.
All Gullco Flux Hopper s and Holding Ovens Utiliz e Low Watt Density Elements to Maintain Unif orm Temperature Thr oughout the Flux Load
22 1/2”
11” 13”
SUBMERGED ARC MOGGY
Model GM-02- This unit can beequipped to produce precision,qualitysubmerged arc or MIG welds. It is guidedby adjustable horizontal guideroller assemblies which maintain aset distance from a vertical mem-ber or a unique optional “handled”steering device. The unit comescomplete with a removable attach-ment post that holds a wire feedhead, flux hopper & valve (sub-merged arc unit only), wire spool,controls and adjustable weld posi-tioning brackets with horizontal and vertical slides thatenable full positioning of the weld gun either behind orbeside the carriage. See Gullco Bulletin SAM-01 forcomplete details.
”
”
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
BULLETIN GHO-03 Campion
Distributed by
PRINTED IN CANADA
KAT and MOGGY are registered trademarks of Gullco Enterprises Limited
also a vailab le fr om Gullco....
THE WORLD’S MOST COMPLETE RANGEOF STABILIZING OVENS
PORTABLES........lightweight but rugged, easy to load, easy to carry, ready to provide low cost control of welding quality in the shop or at the job site. Available in 20 lb. capacity ( illustrated at right), and 50lb. capacity models.
DETAILED INFORMATIONRE GULLCO STABILIZINGOVENS IS PROVIDED INBULLETIN GOV-2/03
....AND COMPACT, STACK-ABLE IN-SHOP MODELSfeaturing modular design with controlsrecessed for protection, removableshelves and thermostat control thatmaintains oven temperature in the100˚-550˚ F range. Available in 125lb., 350 lb. and 1000 lb. capacity models.
1000 POUND CAPACITY HIGH TEMPERATUREELECTRODE RE-BAKING/STABILIZING OVEN....available in two models - oneequipped with an IndicatingControl System and the other withan Electronic Digital Programmer/Controller. Complete details areprovided in Gullco Bulletin GHTO-186 ...available from Gullco oryour Gullco distributor.
Website: www.gullco.comGULLCO INTERNATIONAL LIMITED - CANADA
Phone: 905-953-4140 Fax: 905-953-4138 e-mail: [email protected]
G U L L C O I N T E R N A T I O N A L I N C . - U . S . A .Phone: 440-439-8333 Fax: 440-439-3634 e-mail: [email protected]
GULLCO INTERNATIONAL [U.K.] LIMITED - EUROPEPhone: +44 (0) 1257-253579 Fax: +44 (0) 1257-254629 e-mail: [email protected]
GULLCO INTERNATIONAL PTY LIMITED - AUSTRALIAPhone: 61 (0) 7 5496-9555 Fax: 61 (0) 7 5496-9522 e-mail: [email protected]
G U L L C O I N T E R N A T I O N A L L I M I T E D - I N D I ATelefax: 91 (0) 20-4272212 Fax: 91 (0) 20-6120802 e-mail: [email protected]
GULLCO INTERNATIONAL SHANGHAI LIMITEDPhone: +8621-50460341 Fax: +8621-50463554 e-mail: [email protected]