guide rails vertical_9010
DESCRIPTION
Guide Rails vertical_9010TRANSCRIPT
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] C 108.20
09
Technical specifications are subject to change without notice.
Safety in Action
For vertical applicationFor fixing onto existing ladders or climbingirons. Comes with joint plate. Mountingbrackets extra to order. Maximum mountingdistance: 1680 mm. Installation of bracketto rail is carried out through the rectangularcut outs in the back of the guide-rail. Maxi-mum section length: 4480 mm.
Anodized aluminiumRail profile: 52 x 33 mmWeight: 1,2 kg per metrePart No. FS-SAL-
Galvanized steelRail profile: 50 x 32 mmWeight: 3,2 kg per metrePart No. FS-SST-Stainless steel, pickledRail profile: 50 x 32 mmWeight: 3,2 kg per metrePart no. FS-SA4-
Guide-Rails: Vertical
BendingSee page C 2.
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 2 08.20
09
Technical specifications are subject to change without notice.
Safety in Action
Smallest radii for guide-rails, made of aluminium, galvanized/stainless steel, shown in mm:
Important information for planning:Guide rail, Aluminium Part No. FS-SAL-Guide rail, Galvanized steel Part No. FS-SST-Guide rail, Stainless steel pickled Part No. FS-SA4-
Typ 1 Typ 2 Typ 3 Typ 4 Typ 5
The length of the bend depends on the bending radius and on the angle (type 1 + 2) and/or off-set (typed 3 - 5).
A = Bottom edge of ladder to salient point of structureB = Of-set (mm)C = Angle (max. 15)D = Bottom edge to centre of obstruction
E = Width of obstructionF = Upper edge of ladder to off-setG = Of-set (max. 260 mm)
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] C 308.20
09
Technical specifications are subject to change without notice.
Safety in Action
Top End-Stop, spring activatedPrevents the fall arrester from either beinginserted incorrectly or accidentally slippingout of the guide-rail. For fitting to the verytop of the rail system. Comes with all fixings.
Stainless steel, pickledWeight: 0,2 kg/eachPart No. 21050
Bottom End-Stop, spring activatedPrevents the fall arrester from eitherbeing inserted incorrectly or accidentallyslipping out of the guide-rail. For fitting tothe very beginning of the rail system.Comes with all fixings.
Stainless steel, pickledWeight: 0,2 kg/eachPart No. 21049
Rigid End-StopDoes not allow the fall arrester beingtaken out of the very top ladder section.Comes with all fixings.
Stainless steel, pickledWeight: 0,2 kg/eachPart No. 11634
Guide Rails: VerticalEnd-Stops
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 4 08.20
09
Technical specifications are subject to change without notice.
Safety in Action
ClampFor fixing onto the center rungs ofexisting ladders, or climbing irons. Comeswith all installation elements. Supportstructure must be checked for sufficientstrength.
Weight: approx. 0,5 kg/each
Shimto compensate for different heights ofindividual rungs. Clamping rail screwlength must be adapted as necessary.
Galvanized steel
t = 5 mmWeight: 0,4 kg/eachPart No. 18861
t = 3 mmWeight: 0,23 kg/eachPart No. 18860
Stainless steel, pickled
t = 5 mmWeight: 0,4 kg/eachPart No. 18863t = 3 mmWeight: 0,25 kg/eachPart No. 18862
t = 2 mmWeight: 0,15 kg/eachPart No. 18859
Guide Rails: VerticalMounting-Brackets
Galvanized steel Part-No. Bolt dimension M 12 x 70 For rung diamter up to 25 mm 10903
Bolt dimension M 12 x 80 For rung diamter 26 up to 35 mm 14804
Bolt dimension M 12 x 90 For rung diamter 36 up to 45 mm 14805
Bolt dimension M 12 x 100 For rung diamter 46 up to 55 mm 14806
Bolt dimension M 12 x 120 For rung diamter 56 up to 70 mm 14807
Stainless steel, pickled Part-No. Bolt dimension M 12 x 70 For rung diamter up to 25 mm 14809
Bolt dimension M 12 x 80 For rung diamter 26 up to 35 mm 14813
Bolt dimension M 12 x 90 For rung diamter 36 up to 45 mm 14814
Bolt dimension M 12 x 100 For rung diamter 46 up to 55 mm 14815
Bolt dimension M 12 x 120 For rung diamter 56 up to 70 mm 14816
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] C 508.20
09
Technical specifications are subject to change without notice.
Safety in Action
BracketUsed for fixing of guide-rails onto the side ofclimbing irons. Comes with all installationelements. For step irons of 20- 25 mmdiameter.
Galvanized steelWeight: 1,6 kg/eachPart No. 11319
Stainless steel, pickledWeight: 1,6 kg/eachPart No. 17989
ClampFor clamping guide-rails to flat iron sidemembers of already mounted ladders. Comeswith all installation elements.
Standard:Dimension "b" = max. 60 mmDimension "h" = max. 15 mm
Galvanized steelWeight: 1,6 kg/eachPart No. 11382
Stainless steel, pickledWeight: 1,6 kg/eachPart No. 16847
Special version:when ordering please indicate dimension "h"and "b".
Weight: upon request
Galvanized steelPart No. 19091Stainless steel, pickledPart No. 21284
Guide-Rails: VerticalMounting Brackets
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 6 08.20
09
Technical specifications are subject to change without notice.
Safety in Action
BracketFor fastening guide-rails onto a structure, e.g.between step irons. Comes with installationelements for fixing guide-rail to bracket.Support structure must be checked forsufficient strength.
Galvanized steelWeight: 0,6 kg/eachPart No. 11102Stainless steel, pickledWeight: 0,6 kg/eachPart No. 16838
BracketFor fixing guide-rails onto side-corner struts ofexisting ladders. Comes with all installationelements.
Galvanized steelWeight: 1,3 kg/eachPart No. 17228
Guide-Rails: VerticalMounting Brackets
BracketFor clamping guide-rails to round iron sidemembers diameter 35 -70 mm of alreadymounted ladders. Comes with all installationelements.
Galvanized steelWeight: 1,9 kg/eachPart No. 18363
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] C 708.20
09
Technical specifications are subject to change without notice.
Safety in Action
Pivotable FootrestFor use on ladders with side-rails made of flatiron up to an iron width of 50 mm. Comes withall installation elements.
Weight: 19 kg/each
Hinge on left sideGalvanized steelPart No. 21516
Stainless steel, pickledPart No. 23430
Hinge on right sideGalvanized steelPart No. 21520Stainless steel, pickled upon request
Footrest for ChimneysFor installation on climbing irons with diametermax. 20mm. Pivots laterally. Comes with allinstallation elements.
Galvanized steelWeight: 14,5 kg/eachPart No. 16124
Stainless steel, pickledWeight: 14,5 kg/eachPart No. 18008
Guide-Rails: VerticalFootrests
Folding FootrestUnfolds to allow unrestricted climber access.Complete with fixings. The distance betweenrungs shall be min. 220 mm. Max. rung diameter:30 mm.
Galvanized steelWeight: 4,6 kg/eachPart No. 23724
Stainless steel, pickled upon request
Footrests for climbing paths with reinforce-ment upon request.
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 8 08.20
09
Technical specifications are subject to change without notice.
Safety in Action
Guide-Rails: VerticalExit Section
Exit SectionUsed for secure removing/inserting the fallarrester from/into the guide-rail, e.g. onplatforms. Suitable for rung spacing of 250 -320 mm with max. rung diameter of 24 mm.Special sizes on request. In this case pleaseenclose sketch with ladder cross-section, seepage C 11. A single-way assembly aid is partof the scope of supply.
Galvanized steelWeight: 3,4 kg/eachPart No. 11317
Stainless steel, pickledWeight: 3,4 kg/eachPart No. 16978
- Recommended installing height aboveplatform: ca. 1.000 mm.
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] C 908.20
09
Technical specifications are subject to change without notice.
Safety in Action
TurntableFor safe transfer from vertical to horizontal.Made of stainless steel plate and aluminiumrail section. Please specify the profile of thehorizontal and vertical guide-rail.
Weight: 2,6 kg/eachStainless steel, pickled
Bending radius horizontal guide rail> 1000 mmPart No. 11607
Bending radius horizontal guide rail< 1000 mmPart No. 20349
Cost for mounting turntablePart No. 16884
Guide-Rails: VerticalAccessories
Ho-Ver turn tableFor safe change of travel direction fromvertical to horizontal to vertical travel. Thedirection of travel can only be changed to theleft or to the right. Consult Sll technicalsupport department for other installationcombinations.
Weight: 5,0kg per 1 unit
Stainless steel pickledPart No. 22322
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 10 08.20
09
Technical specifications are subject to change without notice.
Safety in Action
Mounting bracket with adjustableprojectionProjection: 120 mm up to 160 mm. Comeswith all installation elements. To be used formounting turntable Part No. 11607 only.
Galvanized steelWeight: 1,6 kg/eachPart No. 10867
Stainless steel, pickledWeight: 1,6 kg/eachPart No. 11591
Guide Rails: VerticalAccessories
Mounting bracket with adjustableprojectionProjection: 160 mm up to 200 mm. Comeswith all installation elements. To be used formounting turntable Part No. 11607 only.
Galvanized steelWeight: 1,8 kg/eachPart No. 10869
Stainless steel, pickledWeight: 1,8 kg/eachPart No. 15250
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] C 1108.20
09
Technical specifications are subject to change without notice.
Safety in Action
Reinforcement/StrengtheningIs required, when the distance between lastmounting point and top-end of the rail exceeds380 mm. It must be bolted onto the guide-railat a distance of 560 mm and must extenddown over at least two mounting brackets.Square tube 50 x 30 x 3 mm or 50 x 50 x 4mm. Comes with all installation elements.
Galvanized steelWeight: 3,3 kg per metrePart No. HV-ST-Stainless steel, pickledWeight: 3,3 kg per metrePart No. HV-A4-
Anodized aluminiumWeight: 1,9 kg per metrePart No. HV-AL-
Anodizedaluminium
Galvanized steelStainless steel,pickled
Guide-Rails: VerticalAccessories
Identification platefor Fall Protection Systems - Guide Rails.
Part No. 19878 not graved
engraved
Part No. Denomination 20866 Guide Rails Alu 20867 Guide Rails Galvanized Steel 20868 Guide Rails Stainless Steel
-
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 12 08.20
09
Technical specifications are subject to change without notice.
Safety in Action
Guide-Rails: VerticalAccessories
Shaft Entering DeviceFor safe entry into manholes. The device isinserted into the female coupling on the top ofthe guide-rail in the manhole. This device canbe moved from one manhole ladder to another.
Stainless steel, pickledWeight: 8,0 kg/eachPart No. 17065
Female Coupling for Shaft EnteringDeviceThis device is fixed to the top of the guide-railin the manhole.
Stainless steel, pickledWeight: 0,8 kg/eachPart No. 16191