gsm/gprs/gps tracker manual inglês e...
TRANSCRIPT
1
GSM/GPRS/GPS TRACKER
MANUAL
Inglês e Português
PP
U
Preface
2
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.
Make sure to read this manual carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any change will be integrated in the
latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Contents 1. Summary ..................................................................................................................................................................................... 3
2. Applications ................................................................................................................................................................................. 3
3 Hardware Description ................................................................................................................................................................... 3
4 Specs. ............................................................................................................................................................................................ 4
5 Usage ............................................................................................................................................................................................ 5
5.1 SIM card installation ................................................................................................................................................................. 5
5.2 Battery and Charger ................................................................................................................................................................... 5
5.3 Startup........................................................................................................................................................................................ 6
5.4 Initialization ............................................................................................................................................................................... 6
5.41 Reply message with Google link ............................................................................................................................................. 6
5.5 Change the password ................................................................................................................................................................. 7
5.6 Authorization ............................................................................................................................................................................. 7
5.7 Single Locating .......................................................................................................................................................................... 8
5.8 Get geographical location .......................................................................................................................................................... 8
5.9 Auto Track ................................................................................................................................................................................. 9
5.10 Monitor (Voice Surveillance) .................................................................................................................................................. 9
5.11 Storage ..................................................................................................................................................................................... 9
5.12 Vibration alarm ...................................................................................................................................................................... 10
5.13 Geo-fence .............................................................................................................................................................................. 10
5.14 Movement alert ...................................................................................................................................................................... 11
5.15 Overspeed alert ...................................................................................................................................................................... 11
5.16 SOS button ............................................................................................................................................................................ 11
5.17 Low battery
alert…………………………………………………………………………………………………………… 11
5.18 State Checking ....................................................................................................................................................................... 12
5.19 IMEI checking ....................................................................................................................................................................... 12
5.20 Terminal (local) Time Setting ................................................................................................................................................ 12
5.21 GPRS setting ......................................................................................................................................................................... 12
5.22 Modes switch between “SMS” and “GPRS” ......................................................................................................................... 13
5.23 Web platform and PC installation tracking software ............................................................................................................. 13
6 Cautions ...................................................................................................................................................................................... 13
7 Faults & The solutions ................................................................................................................................................................ 14
3
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate
and monitor any remote targets by SMS or internet.
2. Applications
Vehicle rental / Fleet management etc
Powerful magnet+ water proof, adsorbing in the hidden place of car for tracking secretly.
Protect child / the old / the disabled / pet etc
Provide peace-of-mind for businessmen
Personnel Management
Criminals Tracking
3 Hardware Description
3.1 Front face 3.2 Rear face
3.3 Side face
Indicator for signals.
4
3.4 Bottom face
3.5 Interior
4 Specs.
Content Specs.
Dim. 64mm x 46mm x 17mm(1.8”*2.5”*0.65”)
Weight 50g
Network GSM/GPRS
Band 850/900/1800/1900Mhz
GPS chip SIRF3 chip
GPS sensitivity -159dBm
GPS accuracy 5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Car charger 12—24V input
5V output
You can update software,
charge battery from here.
SOS Button ON /OFF Button
Built-in GSM/GPRS antennas
is inside Microphone
GSM Card Slot Install the battery like this
5
Wall charger 110-220V input
5V output
Battery Chargeable changeable 3.7V 800mAh Li-ion battery
Standby 80hours
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 5%--95% non-condensing
5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS
message must in Text format, can’t be identified for PDU format.
Steps:
5.1.1 Open the rear cover, and pick out the battery.
5.1.2 Push the foil up according the arrow on the foil and load the miscro SD card and push
back.
5.1.3 Put the SIM card into the holder as picture shows.
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first time. Please use the battery and
charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full
6
battery can standby 80 hours. After first use, the battery usually should be charged fully in
3-5 hours.
Cautions:
a: For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t
bump, puncture it violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.
5.3 Startup
Put the SIM card and battery in place.
Turn on the unit outdoor by pressing the “on/off” button for 4-5seconds until the
indicator is flashing.
For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4
for instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as
the GPS signals. The indicator will keep flashing every 3 seconds when the unit has
received the signals.
When this unit receives GPS signals normally, you can use it and do any setting as the
instructions of this manual.
5.4 Initialization
Send “#begin#password#” in SMS to the unit, it will reply “begin ok” and initialize all the
settings. (Default password: 123456)
For example, send SMS“#begin#123456#” to the tracker via a cell phone, If succeeded,
if will reply“begin ok”.
5.4.1 Reply message with Google link
7
Send “#smslink#123456#” in SMS to the unit, it will reply message with Google link.
Eg, http://maps.google.com/?q=N22.1211212,E113.080933.
5.5 Change the password
5.5.1 Set Password: Send sms: “#password#old password#new password#” to the unit to
change the password.
For Example, please send sms: “#password#123456#888888#” to terminal device, it will
reply sms: “password OK”. New password 888888 changed in success.
5.5.2 Be sure keep the new password in mind, you have to upload the software to restore the
original setting in case of losing the new password.
5.5.3 Make sure the new password is in 6 digits Arabic numbers, or the tracker can not
recognize the password.
5.6 Authorization
There are only 5 cell phone numbers able to be authorized, be sure to set the authorization
phone number before use.
5.6.1 Call the tracker for 10 times continuously and get position correctly, then it will make
the cell phone number as the authorized number automatically.
5.6.2 Send SMS:“#admin#password#cell phone number#” to set up a authorized number.
The other authorized numbers should be set by the first authorized number. If the number
is successfully authorized, the unit will reply “admin ok!” in SMS. If set the second
authorized number, please send SMS “#admin#password#the first authorized number#the
second authorized number#”.
5.6.3 Send SMS:“#noadmin#password#authorized number#”to delete the authorized
number.
8
5.7 Single Locating
5.7.1 If there is no authorized number, when any number dials up the unit, it will report a
Geo-info; If there is already an authorized number, then it will not respond when an
unauthorized number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time
Geo-info as below:
*Tracking location, When GPS signals is weak, the position of latitude and longitude
included in the SMS is the position that the tracker received GPS signals at last. If it is
different with its exact current location, pay attention to check the time included in the SMS
you got.
5.8 Get geographical location
5.8.1 You must set up the APN of your local GSM network for the SIM card in tracker first
before using this function, if there is user name and password for GPRS login, Please refer to
5.21.1 to configure the APN, user name and password for GPRS login.
9
5.8.2 After configure the APN, send: “#address#password#” to device, it will reply SMS
including absolute street address. For example: 50meters around Vienna Hotel,Qinghu
community, Longhua, Bao'an district, Shenzhen, Guangdong, china.
5.9 Auto Track
5.9.1 Send SMS command “#fix#030s#005n#password#” to the tracker device, it will report
the Geo-info at 30s intervals for 5 times. (s:second, m:minute, h:hour). This command
setting must be in 3 digits and the maximum value is 255.( remark: when the tracker doesn’t
open the function that load data to the tracking system)
5.9.2 Unlimited times auto track: Send SMS “#fix#030s#***n#password#” to the tracker
device, it will reply the Geo-info continuously at 30 seconds intervals.
5.9.3 Cancellation: Send SMS “#nofix#password#” to the tracker device.
Note: the interval must not less than 20s.
5.10 Monitor (Voice Surveillance)
5.10.1 The command to switch between Track and Monitor are “tracker” and “ monitor”.
5.10.2 The default mode is “track” (Tracking status).
5.10.3 Send SMS “#monitor#password#” to the unit, and it will reply “monitor ok!” and
switch to “monitor” mode.
5.10.4 Send SMS “#tracker#password#” to the unit, it will reply “tracker ok!” and restore to
“track” mode.
5.11 Storage
5.11.1 Auto Storage:When the tracker devices lost GSM signals or fall offline from GPRS,
tracker will store the tracking position and alerts automatically in the flash upon the pre-set
condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized
10
numbers or monitoring platform (server), but the stored tracking data should be loaded to the
monitoring platform via SMS command.
5.11.2: Storage Clearance: send SMS: “#clear#password#” to tracker device, it will reply
“clear ok”.
5.11.3:Storage Volume: Built-in flash 1MB (store about 7,000 positions datas); external TF
card support 16 GB at most.
5.11.4 The stored data will be sent to the tracking system www.gps103com through the GSM
signal recover, and can check the history data on it.
5.12 Vibration alarm
It is disabled as default, send “#vibrate#grade level#password#” to tracker (grade level can
set 5 levels, 1 is the lowest, 5 is the highest), tracker will reply “vibrate ok!”. “Vibration
alarm” will send to authorized phone number when tracker is being shocked, and one alarm
for each shock event trigger.
Cancel: Send “#novibrate#password#” to cancel the vibration alarm, reply “novibrate OK”
5.13 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send
the message to the authorized numbers when it breaches the district.
5.13.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send
SMS: “#stockade#password#semidiameter#time#latitude#longitude#” to unit to set the
restricted district. In case of breach, it will send SMS alert to the authorized numbers every 3
minutes.
Remark: send “#stockade#123456#500#60#22.312451#113.54376#”, 500 represents is the
semidiameter of a circle; 60 represents valid time, if the car exceed the range, it will send
11
alert to the authorized number after 60 seconds ( valid time default is in second ); latitude
and longitude represent the current location.
5.13.2 Cancel: Send SMS: “#nostockade#password#” to deactivate this function.
5.14 Excesso de velocidade alerta
5.14.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send
SMS: “#move#password#” to the unit, then the unit will reply “move ok!”. In case of such a
movement(the unit default distance is 200meters), it will send SMS alert “please attention
shift alarm” to the authorized numbers every 3 minutes.
5.14.2 Cancel: Send SMS:“#nomove#password#” to deactivate the movement alert.
5.15 Overspeed alert
5.15.1 Set up: Send SMS:“#speed#password#speed number in 3 digits#” to the unit (suppose
the speed is 80km/h), eg, send SMS “#speed#123456#080#”, and it will reply “speed ok!”.
When the car moves exceeding 80 km/h, the unit will send SMS alert “speed alarm” to the
authorized number .
5.15.2 Cancel: Send SMS “#nospeed#password#” to deactivate the overspeed alarm.
Remark: The recommended speed should be not less than 20km/h. For below that rate, it will
be effected the accuracy by gps signals drift etc.
5.16 SOS button
Press the SOS for 3 seconds, it will send “SOS alarm + Geo-info” to all the authorized
numbers .
5.17 Low battery alert
When the tracker is set authorized number, the battery capacity is less than 10%, tracker will
send alert to the authorized number, eg: Low battery, charge.
12
5.18 State Checking
Send SMS:“#check#password#” to the tracker device, it will reply the curreny status via
SMS as: Electricity: 100% GPS: A/V GPRS: open/close battery: 100%.
5.19 IMEI checking
Send SMS command "#imei#password#" to the unit.
E.g.: Send SMS command "#imei#123456#" to the unit, an IMEI number in 15 digits will be
replied to your cell phone.
5.20 Terminal (local) Time Setting
Remark: England 0 time zone is the default time.
5.21.1 Send SMS “#time zone#password#(S)+hour+minute#”. If set OK, it will reply time
ok.
For example, if in GMT+8, send SMS “#time zone#123456#S0810#”. S represents the set
time code , 08 represents different time zone hours of tracking time, 10 represents different
minutes.
5.21 GPRS setting
User must send SMS via cell phone to set up IP, port and APN before starting GPRS.
5.21.1 Setting up APN
5.21.1.1 APN standards for Access Point Name and differs from country to country. For
more information about the local APN, inquire with your local GPRS network operator.
5.21.1.2 Text the tracker a SMS “#apn#password#APN content#APN user name#APN
password” via a cell phone and if succeeded in setup, the tracker will return the message
“APN OK”.
13
5.21.1.3 e.g. send SMS command “#APN#123456#CMNET#”. If succeeded, “APN OK” is
returned by the tracker in SMS.
Notes: 123456 refer to password of tracker and CMNET is the APN content of China Mobile
(One of GSM Operator in china, it has no APN user name and password). If there is no APN
user name and password , then no need to write APN user name and password.
5.21.2 IP and port setup
5.21.2.1 Send SMS as below via a cell phone: "#adminip#password#IP Address#Port
number#". If succeeded, “adminip OK” is returned by the device in SMS.
5.21.2.2 e.g, Send SMS command “#adminip#123456##222.101.150.75#9000#” to the
tracker device, If succeeded, “adminip OK” is returned by the device in SMS.( 123456 is
default password, 222.101.150.75 is IP, 9000 is port )
5.22 Modes switch between “SMS” and “GPRS”
5.22.1 The default mode is “GPRS”
5.22.2 Send SMS “#noadminip#password#” to the tracker, it will reply “noadminip ok” and
switch to “GSM” mode.
5.22.3 Send IP command to switch to "GPRS" mode.
5.23 Web platform and PC installation tracking software
5.24.1 Web based platform www.gps103.com.
Eg, Configuration IP: 202.104.150.75 Port: 9000.
6 Cautions
Please comply with the instructions to extend the unit life:
6.1 Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside
circuitry.
14
6.2 Don’t use & store the unit in dusty places.
6.3 Don’t put the unit in overheated or overcooled places.
6.4 Handle carefully. Don’t vibrate or shake it violently.
6.5 Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
6.6 Don’t paint the unit, this may cause some foreign materials left in between the parts.
6.7 Don’t disassemble or refit the unit.
6.8 Please use the battery and charger provided by manufacturer. Using other batteries and
chargers will cause unwanted situation.
7 Faults & The solutions
Faults Solution
Startup Fail Check the battery and see if it is fully charged or correctly installed.
Hang up Fail In existence of an authorized number, an unauthorized number dials up the unit. Please initialize the unit and re-set up the authorized numbers.
No GSM Signal Please make sure SIM Card is GSM Net and installed correctly; also call display should be on; but no call transfer and PIN code off.
GSM / GPRS / GPS TRACKER
MANUAL
U
15
Prefácio
Obrigado por adquirir o rastreador. Este manual mostram s como operar o
dispositivo sem problemas e corretamente.
Certifique-se de ler este manual cuidadosamente antes de usar este produto. Por
favor, note que a especificação e
as informações estão sujeitas a alterações sem aviso prévio s neste manual.
Qualquer alteração será integrada na
versão mais recente. O fabricante não assume nenhuma responsabilidade por
qualquer erros ou omissões neste
documento.
16
Conteúdo
Resumo
2. Aplicações
3 Descrição de Hardware
4 Specs.
5 Uso
5.1 Instalação do cartão SIM
5.2 e Bateria
5.3 Startup
5.4 Inicialização
5.41 mensagem Responder com link do Google
5.5 Alterar a senha
5.6 Autorização
5.7 Único Localizando
5.8 Obter a localização geográfica
5.9 Auto Pista
5.10 Monitor (Vigilância de Voz)
5.11 Armazenamento
5.12 Alarme de vibração
5.13 Geo-fence
5.14 Movimento de alerta
5.15 Excesso de velocidade alerta
5.16 botão SOS
5.17 bateria fraca
5.18 Estado Verificação
5.19 IMEI verificação
5.20 Terminal (local) Configuração da Hora
5,21 configuração GPRS
5.22 Modos de alternar entre "SMS" e "GPRS"
5.23 plataforma Web e software de monitoramento de instalação PC
6 Cuidados
7 de faltas e as soluções
17
1. Resumo
Trabalhando Baseado em rede GSM / GPRS existente e satélites GPS, este produto
pode localizar e monitorar todos os alvos do telecontrole por SMS ou internet.
2. Applications
Veículo de aluguel / gestão de frotas etc
Ímã poderoso + à prova de água, adsorção no lugar escondido do carro
para rastrear secretamente.
Proteja a criança / velho / deficientes / pet etc
Proporcionar paz de espírito para os empresários
Gestão de Pessoas
Criminosos Rastreamento
3 Descrição de Hardware
3.1 Face frontal 3.2 face posterior
3.3 Face lateral
18
3,4 face de fundo
3.5 Interior
4 Specs.
Conteúdo
Specs.
Dim.
64 m m x 46 m m x 17 m m (1.8 "* 2.5" * 0.65 ")
Peso
50g
Rede
G S M / GPRS
Banda
850/900 / 1800/1900mHz
Chip GPS
SIRF3
Sensibilidade GPS
19
-159dBm
A precisão do GPS
5m
Tempo para a primeira Fix
45s estado Fria
35s estado quente
1s estado quente
Carregador de carro
Entrada de 12-24V
5V saída
Carregador de parede
110 - 220V de entrada
5V saída
Bateria
Exigível mutável 3.7V 800mAh bateria Li-ion
Standby
80 hou r s
Temp.
-40 ° C a +85 ° C
Operação T emp.
-20 ° C a +55 ° C
Umidade
5% - 95% sem condensação
20
5 Uso
5.1 Instalação do cartão SIM
Certifique-se de que não há transferência de chamadas e exibição de chamada é, e
código PIN. A mensagem SMS deve
em formato de texto, não pode ser identificado para formato de PDU.
Passos:
5.1.1 Abra a tampa traseira, e escolher a bateria.
5.1.2 Empurre a folha de acordo a seta no papel alumínio e coloque o cartão SD
miscro e empurrar para trás.
5.1.3 Coloque o cartão SIM no suporte como mostra a imagem.
5.2 e Bateria
Não carregue a bateria de capacidade em 8 -12 horas pela primeira vez. Utilize a
bateria e um carregador fornecido
pelo fabricante. Esta unidade adota o built-in bateria Li-ion e bateria cheia pode
espera 80 horas. Após a
primeira utilização, a bateria normalmente deve ser totalmente carregada em 3-5
horas.
Cuidados:
um: Pois é bateria Li-ion, que contém produtos químicos prejudiciais e pode
21
estourar, por favor, don 't colisão,
fure-a com violência e mantê-lo fora do fogo.
b: Por favor, carregue a bateria em vez de mantê-lo funcionando normalmente.
5.3 Startup
Coloque o cartão SIM ea bateria no lugar.
Ligue a unidade ao ar livre, premindo o botão "on / off" para 4-5 segundo até
que o indicador está a piscar.
Para a primeira utilização, por favor inicialize a unidade e restaurar a
configuração padrão. (Por favor,
consulte 5.4 para a instrução.)
Em 10 e 40 segundos, a unidade irá começar a trabalhar e adquirir os sinais
GSM, bem como os sinais de
GPS. O indicador continuará a piscar a cada 3 segundos quando a unidade recebeu
os sinais.
Quando esta unidade recebe sinais de GPS normalmente, você pode usá-lo e
fazer qualquer ajuste como as
instruções deste manual.
5.4 Inicialização
Enviar "# begin # senha #" em SMS para a unidade, ele irá responder "begin ok" e
inicializar todas as
configurações (senha padrão: 123456).
Por exemplo, enviar SMS "# begin # 123456 #" para o rastreador através de um
telefone celular, se bem sucedido,
se vai responder "começar ok".
22
5,4 0,1 Responder mensagem com link do Google
Enviar "# smslink # 123456 #" em SMS para a unidade, ele irá responder
mensagem com link do Google.
Por exemplo, http://maps.google.com/?q = N 22.1211212, E 113,080933.
5.5 Alterar a senha
5.5.1 Set Password: Enviar sms: “#password#old password#new password#” para a
unidade para alterar a senha.
Por exemplo, por favor, envie sms: “#password#123456#888888#” para o dispositivo
terminal, ele irá responder
sms: "password OK". Nova senha 888888 mudou para o sucesso.
5.5.2 Certifique-se de manter a nova senha em mente, você tem que fazer o upload
do software para restaurar a
configuração original no caso de perder a senha nova.
5.5.3 Certifique-se que a nova senha está em 6 dígitos números arábicos, ou o
rastreador não pode reconhecer a
senha.
5.6 Autorização
Há apenas 5 números de telefone celular capaz de ser autorizados, não se esqueça
de definir o número de
autorização antes de usar.
5.6.1 Ligue para o rastreador para 10 vezes continuamente e se posicionar
corretamente, então ele vai fazer o
número de telefone celular como o número autorizado automaticamente.
5.6.2 Enviar SMS: "# # admin senha número de telefone celular # #" a criação de
23
um número autorizado O outro,
um número não autorizadas u s deve ser definido pelo primeiro número autorizado
Se o número for autorizado com
sucesso, a unidade.. responder "admin ok!" em SMS. Se definir o segundo
autorizado n úmero, envie
SMS "# admin # senha # o primeiro número autorizado # o segundo número
autorizado #".
5.6.3 S SMS fim: "# noadmin # senha # # número autorizado" para apagar o
número autorizado.
5.7 Único Localizando
5.7.1 Se não houver nenhum número autorizado, quando qualquer número disca o
aparelho, ele irá relatar uma
Geo-info; Se já existe um número autorizado, dia en que não vai responder quando
um número não autorizado
chama-lo.
5.7.2 Quando um disca o número autorizado até a unidade, ele vai desligar e relatar
um tempo real Geo-info
como abaixo:
* Local de Seguimento, quando os sinais de GPS é fraco, a posição de latitude e
longitude incluído no SMS é a
posição que o rastreador recebeu sinais de GPS no passado. If i t é diferente com a
sua localização exata atual,
prestar atenção para verificar o tempo incluído nos SMS que você tem.
24
5.8 Obter a localização geográfica
5,8 0,1 Você deve configurar o APN da sua rede GSM local para o cartão SIM no
perseguidor antes de usar esta
função, se houver nome de usuário e senha para login GPRS, Por favor, consulte
5.21.1 para configurar o APN,
nome de usuário e senha para login GPRS.
5,8 0,2 Depois de configurar o APN, enviar: "# endereço # # senha" para o
dispositivo, ele irá responder SMS
incluindo endereço absoluto. Por exemplo: 50 metros nos arredores de Viena Hotel,
comunidade Qinghu, Longhua,
distrito de Bao'an, Shenzhen, Guangdong, China.
5.9 Auto Pista
5 .9.1 Enviar SMS comando "# corrigir # 030S 005N # # pa ssword #" para o
dispositivo rastreador, ele irá
relatar o Geo-info em intervalos de 30s por 5 vezes. (S: em segundo, m: minuto, h:
hora). Este conjunto de
comandos ting deve estar em 3 dígitos eo valor máximo é 255. (Observação:
quando o rastreador doesn 't abrir a
função que os dados de carga para o sistema de rastreamento)
5 .9.2 ilimitado vezes auto pista: Enviar SMS "# corrigir # # 030S *** n # # senha"
para o dispositivo rastreador,
ele irá responder a Geo-info continuamente em intervalos de 30 segundos.
5 .9.3 Cancelamento: Enviar SMS "nofix # # # senha" para o dispositivo rastreador.
Nota: o intervalo não deve ser inferior a 20 anos.
25
5 .1 0 Monitor (Vigilância de Voz)
5.10.1 O comando para alternar entre Acompanhar e monitorar são "perseguidor" e
"monitor".
5.10.2 O modo padrão é "faixa" (Acompanhe estado ing).
5.10.3 S SMS end “#monitor#password#” para th e unidade, e ele vai responder
"monitor ok!" E mudar para
"monitorar" modo.
5.10.4 Enviar SMS “#tracker#password#” para th e unidade, ele irá responder
"rastreador ok!" E restaurar a
"rastrear" mode.
5.1 um de armazenamento
5.11.1 Auto Armazenamento: Quando os dispositivos rastreadores perdido sinais
GSM ou cair offline a partir de GPRS,
perseguidor vai armazenar a posição de monitoramento e alertas automaticamente
o flash sob a condição de pré-set,
quando os sinais GSM voltar, todos os alertas de eventos será automaticamente
enviado para os números autorizados
ou plataforma de monitoramento (servidor), mas os dados armazenados de
rastreamento deve ser carregado para a
plataforma de monitoramento via comando SMS.
5.11.2: Clearance de armazenamento: enviar SMS: "# claro # # senha" para o
dispositivo rastreador, ele irá
responder "claro ok".
5.11.3: Volume de armazenamento: Built-in flash de 1MB (loja de cerca de 7.000
26
posições DATAS); externo apoio TF
cartão de 16 GB no máximo.
5.11.4 Os dados armazenados serão enviados para o sistema de rastreamento
www.gps103.com através do sinal GSM recover, e pode verificar os dados de
história sobre ele.
5.1 2 alarme Vibração
Ele está desativado por padrão, enviar “#vibrate#grade level#password#” ao tracker
(nível de ensino pode definir cinco níveis, 1 é a mais baixa, 5 é o mais alto),
rastreador irá responder "vibrar ok!" ". Alarme Vibração "irá
enviar para o número de telefone autorizado quando o tracker está sendo chocado, e
um alarme para cada gatilho
evento choque.
Cancelar: Enviar “#novibrate#password#” para cancelar o alarme vibratório,
resposta "novibrate OK"
5.1 3 Geo-fence
Configurar um geo-cerca para que a unidade restrinja seus movimentos dentro de
um distrito. A unidade irá enviar a
mensagem para os números autorizados quando rompe o distrito.
5.13.1 Set up: Quando a unidade fica imóvel em um lugar por 3-10 minutos, o
usuário pode enviar
SMS “#stockade#password#semidiameter#time#latitude#longitude#” a unidade
para definir o distrito
restrito. Em caso de violação, ele irá enviar SMS de alerta para os números
autorizados a cada 3 minutos.
27
Observação: enviar "# stockade # 123456 # 500 # 60 # # 22,312451 113,54376 #",
500 representa é o semidiameter de
um círculo, 60 representa o tempo válido, se o carro ultrapassar a faixa, ele irá
enviar alerta para o número
autorizado após os 60 segundos (padrão de tempo válido é o segundo), latitude e
longitude representam a posição
atual.
5.13.2 Cancelar: Enviar SMS: “#nostockade#password#” para desativar esta função.
5.1 4 Movimento alerta
5.14.1 Montagem: Quando a unidade fica imóvel em um lugar por 3-10 minutos, o
usuário pode enviar
SMS: “#move#password#” para a unidade, a unidade irá responder "Mover ok!". No
caso de tal movimento
(a distância padrão da unidade é de 200 metros), ele irá enviar SMS alerta "por
favor atenção mudança de
alarme" para os números autorizados a cada 3 minutos.
5.14.2 Cancelar: Enviar SMS: :“#nomove#password#” para desativar o alerta do
movimento.
5.1 5 Excesso de velocidade alerta
5.15.1 Configurar: Enviar SMS: :“#speed#password#numero de velocidade em 3 digitos#”
para a unidade
(Suponha que a velocidade é de 80 quilômetros por a hora), por exemplo, enviar
SMS “#speed#123456#080#”
e ele irá responder "velocidade ok!". Quando o carro se move superior a 80 Km / h,
28
a unidade irá enviar SMS de
alerta "alarme de velocidade" para o número autorizado .
5.15.2 Cancelar: Enviar SMS “#nospeed#password#” para desativar o alarme de
excesso de velocidade.
Observação: A velocidade recomendada não deve ser inferior a 20 km / h. Para
seguir essa taxa, que será efetivada
a precisão por gps sinais deriva etc
5.1 6 botão SOS
Pressione o botão SOS por 3 segundo s, ele irá enviar "SOS alarme + Geo-info"
para todos os números autorizados.
5.17 alerta de bateria fraca
Quando o rastreador está definido o número autorizado, a capacidade da bateria é
inferior a 10%, o rastreador irá
enviar alerta para o número autorizado, por exemplo: bateria fraca, a carga.
5. 18 Estado Verificação
Enviar SMS: “#check#password#” para o dispositivo rastreador, ele irá responder o
status curreny via SMS como:
Eletricidade: 100% GPS: A / V GPRS: bateria de abertura / fechamento: 100%.
5. 19 IMEI verificação
Enviar SMS comando "#imei#password#" para a unidade.
EX: Enviar SMS comando "#imei#123456 #" para a unidade, um número IMEI de
15 dígitos será respondido para o seu celular.
5.2 0 Terminal (local) Configuração da Hora
Observação: Inglaterra 0 fuso horário é o tempo padrão.
29
5. 0,1 21 Enviar SMS “#time zone#password#(S)+hour+minute#”. Se definido OK, ele
irá responder tempo ok.
F ou exemplo, se em GMT +8, s end SMS “#time zone#123456#S0810#”.
S representa o código de tempo definido,
0 8 representa diferentes horários horas de zona de controle de tempo, 10 minutos,
representa diferentes.
5.2 uma configuração GPRS
O usuário deve enviar SMS via telefone celular para configurar IP, porto e APN
antes de iniciar GPRS.
5.21.1 Configurando APN
5.21.1.1 normas APN para Access Point Name e difere de país para país. Para mais
informações sobre o APN local,
informe-se com seu operador de rede local GPRS.
5.21.1.2 texto o tracker um SMS "#apn # senha # APN conteúdo # nome de usuário
APN # APN senha"
através de um
telefone celular e se conseguiu a instalação, o rastreador irá retornar a mensagem
"APN OK".
5.21.1.3 por exemplo, enviar SMS comando "# APN # 123456 # CMNET #". Se
bem sucedida, "APN OK" é retornado pelo
rastreador em SMS.
Notas: 123456 referem-se a senha de rastreador e CMNET é o conteúdo APN da
China Mobil e (Um operador GSM na
China, que não tem um nome de usuário e senha APN). Se não houver um nome de
30
usuário e senha APN, então não há
necessidade de escrever o nome de usuário e senha APN.
5.21.2 IP ea configuração da porta
5.21.2.1 Enviar SMS como abaixo através de um telefone celular:
"#adminip#password#IP Address#Port number#"
Se bem sucedida, "adminip OK" é retornado pelo dispositivo em SMS.
5.21.2.2 por exemplo, enviar SMS comando "# adminip # 123456 # 222.101.150.75
# 9000 #" para o dispositivo
rastreador, se conseguiu ", adminip OK" é retornado pelo dispositivo em SMS.
(123456 é a senha padrão,
222,101. 150,75 é IP,
9000 é a porta)
5.2 2 Modos de alternar entre "SMS" e "GPRS"
5.22.1 O modo padrão é "GPRS"
5.22.2 S final SMS “#noadminip#password#” para th e rastreador, ele irá responder
"noadminip ok" e mudar para
"GSM" modo.
5.22.3 Enviar comando IP para mudar para o modo "GPRS".
5.2 3 plataforma Web e software de monitoramento de instalação PC
5.24.1 plataforma baseada na Web www.gps103.com .
Por exemplo, IP Configuração: 202.104.150.75 Porta: 9000.
6 Cuidados
Por favor, respeitar as instruções para estender a vida útil da unidade:
6.1 Mantenha o aparelho seco. Qualquer líquido, ou seja, chuva, umidade, pode
31
destruir ou danificar o circuito
interior.
6.2 Don 't usar e armazenar o aparelho em locais empoeirados.
6.3 Don 't colocar o aparelho em locais aquecidos ou fria.
6.4 Handle com cuidado. Don 't vibrar ou agitá-lo violentamente.
6.5 Limpar o aparelho com um pano seco. Don 't limpa em produtos químicos,
detergentes.
6.6 Don 't pintar a unidade, isso pode causar alguns materiais estranhos deixados
entre as partes.
6,7 Don 't desmonte ou recolocar a unidade.
6.8 Utilize a bateria eo carregador fornecido pelo fabricante. A utilização de outras
baterias e carregadores
fará com que a situação ed unwant.
7 FALHA & SOLUÇÕES
Faults Solution
FALHA INICIALIZ. Verifique a bateria e veja se ele está totalmente carregada ou instalado corretamente.
FALHA PENDURADA Na existência de um número autorizado, não autorizado um número é discado a unidade. Por favor, inicializar a unidade e re-configurar os números autorizados.
Sem sinal GSM
Por favor, certifique-se do cartão SIM é GSM Net e instalado corretamente, também chamada de exibição deve ser na, mas não a transferência de chamadas e de código PIN.