gsm bts3900 onsite engineer operation guide-20080728-issue1.0
TRANSCRIPT
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
1/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
Code Product Name BTS3900
User GBSS Engineer Product Version V1.0
Drafted B !ire"ess Case and Training Date #00$%0&%#'
GS( BTS3900
)nsite Engineer )*erationGuide
Huawei Technologies Co. td.
!ll rights reser"ed
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
2/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
+ntroduction
#. GSM BTS3900 Onsite Engineer Operation Guide is one part o$
the BTS3900 training pac%age& which is designed to support
the training wor% a'road. The (ain purpose o$ this docu(ent is
to $acilitate the onsite engineers to 'e (uch clear a'out the %e)
points in the engineering and co((issioning wor%.
*. This docu(ent can not 'e used to direct the engineering wor%
in a certain pro+ect without (odi$ication to (atch the detailed
pro+ect scenario ') technical director.
3. ,lease re$er to the BTS3900 -eplo)(ent Guide& Installation
Guide and other docu(ents to direct the engineering and
co((issioning wor%.
#
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
3/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
Content
Chapter # BTS3900 Onsite Engineer Operation ,reparation..............................................3
#.# -ocu(ents ,reparation.................................................................................................... 3
1.1.1 GSM BTS3900 Survey Report........................................................................................3
1.1.2 GSM BTS3900 Engineering Documents.........................................................................3
1.1.3 GSM BTS3900 Instaation Gui!e...................................................................................3
1.1." #ar!$are Instaation %uaity Se&'inspection Report ( )n'site *ommissioning
Report
.....................................................................................................................................................3
#.* ecessar) Tools and Meters.............................................................................................3
Chapter * BTS3900 Onsite Engineer Operation Guide......................................................./
*.# npac%ing Chec%............................................................................................................../
*.* BTS3900 Hardware Installation......................................................................................... /
2.2.1 Instaing t+e BTS3900 *a,inet......................................................................................."
2.2.2 Instaing t+e E-terna G/D *a,es o& t+e BTS3900..................................................."
2.2.3 Instaing t+e BB3900....................................................................................................
2.2." Instaing t+e MS...................................................................................................
2.2. Instaing t+e G/D ca,e o& t+e D*D.........................................................................9
2.2.4 Instaing 5"67 BTS3900 o$er *a,es.......................................................................10
2.2. Instaing t+e BTS3900 Transmission *a,es................................................................11
2.2.6 Instaing t+e BTS3900 Signa *a,es...........................................................................13
2.2.9 Instaing t+e R8 Signa *a,es......................................................................................16
*.3 Chec%ing the Installation o$ the BTS3900 Hardware....................................................... *0
*./ Co((issioning o$ BTS3900............................................................................................ *#
2.".1 oca Maintenance.........................................................................................................21
2.".2 Transmission Testing......................................................................................................22
2.".3 Data oa!ing .................................................................................................................22
2."." Monitoring t+e Device Status........................................................................................22
*
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
4/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2.". Measuring t+e )utput o$er ........................................................................................22
2.".4 *a Testing.....................................................................................................................22
2.". Environment :arms Testing..........................................................................................23
!ttach(ent...............................................................................................................................*/
C,a*ter 1 BTS3900 )nsite Engineer )*erationPre*aration
#.# -ocu(ents ,reparation
#.#.# GSM BTS3900 Sur"e) 1eport
O'tain the BTS3900 sur"e) report $ro( the T-.
2a(iliar with the site position& en"iron(ent and other details in the sur"e) report.
#.#.* GSM BTS3900 Engineering -ocu(ents
,a) attention to the $ollowing in$or(ation $ront "iew and top "iew o$ antenna4$eeder&
installation position o$ the antenna s)ste(& antenna height& direction& tilt angle& etc.& in order
to direct the antenna s)ste( installation and ca'le connection.
#.#.3 GSM BTS3900 Installation Guide
BTS3900 5uic% Installation Guide
BTS3900 Installation Guide
#.#./ Hardware Installation 5ualit) Sel$6inspection 1eport 7 On6siteCo((issioning 1eport
#.* ecessar) Tools and Meters
SN Too"s-(eters uantit# SITEM!STE1 #
* ,ower Meter #
3 Test ,hone #
/ SIM card $or testing #
8 SIM card o$ other operators with the sa(e
$reuenc) 'and
#
: Current tools o$ wireless engineering #
*
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
5/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
C,a*ter # BTS3900 )nsite Engineer )*erationGuide
*.# npac%ing Chec%
)*eration Procedures
Step # Bring the printed pac%ing6lists while lea"ing $or the unpac%ing chec%ing.
Step * Inspect all the ite(s on the pac%ing6list and trans$er the docu(ents to the T- a$ter
getting custo(er;s signature.
Step 3 2or cargo pro'le( in the unpac%ing chec%ing& please $ill in ternal ,G- Ca'les o$ the BTS3900
)*eration Procedures
Step # Based on the actual ca'ling route o$ the ,G- ca'les& (easure the distant 'etween
the ,G- 'olt o$ the BTS3900 ca'inet and the corresponding connecting ter(inal o$
an e>ternal grounding 'ar& and o'tain ,G- ca'les in appropriate length.
Step * !ttach the te(porar) la'els at 'oth ends o$ a ca'le. The contents on the la'els can
'e consistent with the $or(al ones or 'e sel$6prepared.
Step 3 Ma%e OT ter(inals at 'oth ends o$ each ,G- ca'le.
Step / 1oute the ,G- ca'les.
Step 8 Connect the OT ter(inal at one end o$ the ,G- ca'le to the grounding point o$ theBTS3900 ca'inet& as shown in 2igure #.
*0#36##6*? H!@EI Con$idential ,age/& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
6/25
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
7/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
@hether to ena'le the !'is ')pass $unction depends on the actual reuire(ents. The -I,
switches S/ and S8 on the GTM are used to set whether to ena'le the !'is ')pass $unction&
as shown in Ta'le *.
Ta'le * The Setting o$ -I, switches S/ and S8
)*eration Procedures
Step # Hold the BB with 'oth hands and align the holes in each hanger with the
corresponding (ounting holes in the ca'inet. Then& slowl) push the BB along the
guide rail.
Step * Thread each o$ the $our screws through the hanger and (ounting hole in the ca'inet.
Then& use the cross screwdri"er to tighten the screws so that the BB is $astened in
the ca'inet& as shown in 2igure *.
Note
In the case o$ a 6/D -C ca'inet& the BB should 'e installed in the position 3 awa) $ro(
the 2! unit. In the case o$ a */D -C or **0D !C ca'inet& the BB should 'e installed in
the position * awa) $ro( the 2! unit.
*0#36##6*? H!@EI Con$idential ,age:& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
8/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2igure * Installing the BB3900
//End
*.*./ Installing the ,M4,S
!arning
Be$ore contacting the de"ice& wear a grounded ES- wrist strap or glo"es. It can pre"ent the
sensiti"e co(ponents $ro( 'eing da(aged ') the static electricit) in the hu(an 'od).
Note
In the case o$ a **0D !C ca'inet& )ou should install the ,M and ,S A!C4-C. The **0D
!C ca'inet can 'e con$igured with a (a>i(u( o$ one ,M and three ,Ss. In the case o$ a
*/D -C ca'inet& )ou should install the ,S A-C4-C. The */D -C ca'inet can 'e
con$igured with a (a>i(u( o$ $our ,Ss.
Prereuisites
-ip 'its # and * on the rear panel o$ the ,M are set to O& and the other si> -I, 'its are set
to O22& as shown in 2igure 3.
*0#36##6*? H!@EI Con$idential ,age?& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
9/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2igure 3 The setting o$ -I, switches on the ,M
Note
I$ two ,Ms are con$igured and the ports $or (onitoring the ,Ms are logicall) on the sa(e
'us& 'it 3 o$ the -I, switch on the second ,M should 'e set to O and the other 'its should'e set to O22. I$ the ports $or (onitoring the ,Ms are logicall) on di$$erent 'uses& the
settings o$ the -I, switches on the two ,Ms can 'e the sa(e.
)*eration Procedures
Step # On the ,M4,S panel& loosen the two screws to un$old the handle& as shown in
2igure /.
2igure / oosen the screws on the panel
Note
2igure / shows the screws on the ,M panel. The positions o$ the screws on the ,S panel
are the sa(e as those on the ,M panel.
*0#36##6*? H!@EI Con$idential ,age& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
10/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
Step * Slide the ,M4,S $orward along the guide rail until )ou $eel resisting $orce& as
shown in 2igure 8.
2igure 8 Installing the ,M
Step 3 2old the handle& and then tighten the two screws on the panel& as shown in 2igure 8.
Step / Install the other ,M and ,Ss $ro( the le$t to the right.
//End
*.*.8 Installing the ,G- ca'le o$ the -C-
)*eration Procedures
Step # 1oute the ,G- ca'les o$ the -C-.
Step * Connect the OT ter(inal at one end o$ the ,G- ca'le to the corresponding G-
ter(inal o$ the BTS3900 ca'inet and connect the OT ter(inal at the other end o$ the
ca'le to the grounding 'ar at the lower6right o$ the -C-& as shown in 2igure :.
*0#36##6*? H!@EI Con$idential ,age9& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
11/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2igure : Installing the ,G- ca'le o$ the -C-
Step 3 Tighten the screws ') using the cross screwdri"er.//End
*.*.: Installing F/D BTS3900 ,ower Ca'les
This section descri'es onl) the installation (ethod and procedures o$ the e>ternal 6/D input
power ca'les and the power ca'les o$ the (odules in the BTS3900 ca'inet when the
BTS3900 ca'inet supports 6/D power input. ,lease re$er to the chapter ternal 'olt o$ the ter(inal 'loc% ') using the cross screwdri"er& and
disasse('le the protection co"er on the e>ternal ter(inal 'loc% o$ the power suppl)
in the -C-.
Step 8 See the procedures $or installing the OT ter(inals. Connect the OT ter(inals o$ the
power ca'les to the corresponding ter(inal. Connect the OT ter(inal o$ each 6/ D
power ca'le A'lue to the EGA6 ter(inal& and connect the OT ter(inal o$ each G-
ca'le A'lac% to the 1TA ter(inal& as shown in 2igure ?.
2igure ? Installing the e>ternal power ca'les o$ the -C-
Step : Tighten the screws in the ca'le hole ') using the cross screwdri"er.
Step ? ,lace the protection co"er on the -C-& and then tighten the screw on the
*0#36##6*? H!@EI Con$idential ,age#0& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
12/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
protection co"er ') using the cross screwdri"er.
//End
Installing the ,ower Ca'les 'etween the -C- and the -12s
)*eration Procedures
Step # Connect the 3D3 connector o$ each power ca'le to the ,@1 port on the
corresponding -12& as shown in 2igure .
2igure Installing the power ca'le 'etween the -C- and the -12s
Step * Tighten the two screws on the 3D3 connector& as shown in 2igure .Step 3 !ttach a la'el to the power ca'le.
//End
*.*.? Installing the BTS3900 Trans(ission Ca'les
Installing the BB E#4T# Ca'le A#96Inch Ca'inet
I$ the E, 'oard is con$igured& the E#4T# ca'le connects the ca'le connecting euip(ent to
the OTSI-Eport on the E, 'oard.
I$ the E, 'oard is not con$igured& the E#4T# ca'le connects the ca'le connecting
euip(ent to theE#4T#port on the GTM 'oard.
)*eration Procedures
Step # 1oute the E#4T# ca'le outside the ca'inet.
Step * ead the E#4T# ca'le to the ca'inet $ro( the ca'le hole $or the signal ca'le at the
right side.
Step 3 Connect the E#4T# ca'le to the port on the E, or the GTM.
Ta'le 3 -i$$erent wa)s o$ connection o$ E#4T# ca'les
*0#36##6*? H!@EI Con$idential ,age##& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
13/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
I$... Then...
The E, 'oardis con$igured&
Insert the -B*: (ale connector o$ the E# ca'le into theOTSI-E port on the E, and tighten the screws& as shownin 2igure 9. Then& install the E# surge protection trans$er ca'le.
The E, 'oardis not con$igured&
Insert the -B*: (ale connector o$ the E# ca'le into the E#4T#port on the GTM and tighten the screws& as shown in 2igure#0. In this case& installing the E# surge protection trans$erca'le is not reuired.
2igure 9 Connecting the E#4T# ca'le to the E,
2igure #0 Connecting the E#4T# ca'le to the GTM
Step / 1oute the E#4T# ca'le 'ased on the ca'ling route at the right side o$ the #96inch
ca'inet& and $i> the ca'le ') using the ca'le clips.
Step 8 !ttach a la'el to the E#4T# ca'le.
//End
Installing the C,1I Signal Ca'les 'etween the BB and the -12s)*eration Procedures
Step # Insert the S2, connector at one end o$ each C,1I signal ca'le into the C,1I port on
the panel o$ the BB (odule.
Step * Insert the S2, connector at the other end o$ the C,1I signal ca'le into the C,1I0
port on the panel o$ the -12 (odule& as shown in 2igure ##.
*0#36##6*? H!@EI Con$idential ,age#*& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
14/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2igure ## Connections o$ the C,1I ca'le $or a single ca'inet
//End
*.*. Installing the BTS3900 Signal Ca'les
Installing the Monitoring Signal Ca'les $or the -C-60#
Note
The ,S $ault alar( can 'e co(pleted ') onl) one channel o$ Boolean alar( signals. The
pins 3 and : o$ the (onitoring signal ca'le # $or the -C-60# are used to trans(it the alar(
to the BB.
The (onitoring signal ca'le # and * $or the -C-60# need to 'e installed during the
installation o$ the stac%ed ca'inets.
2igure #* shows the (onitoring signal ca'le # $or the -C-60#.
*0#36##6*? H!@EI Con$idential ,age#3& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
15/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2igure #* Monitoring signal ca'le # $or the -C-60#
Ta'le / descri'es the de$inition and color o$ the pins o$ the (onitoring signal ca'le #.Ta'le / -e$inition and color o$ the pins o$ the (onitoring signal ca'le #
,in at the *End
,in o$ theConnector at the
# End
Color -escription
;1 2 Bue T$iste! pair ca,e
1 ;+ite
4 )range T$iste! pair ca,e
3 ;+ite
;2 " Bue T$iste! pair ca,e
;+ite
6 )range T$iste! pair ca,e
;+ite
)*eration Procedures
+nsta""ing t,e monitoring signa" ca"e 1 for t,e DCDU%01 during t,e configuration oft,e %2$V sing"e cainet.
Step # Connect the 1/8 connector at one end o$ the (onitoring signal ca'le # to the ET6
!M0 port on the ,E (odule o$ the BB& as shown in 2igure #3.
2igure #3 Installing the (onitoring signal ca'le 'etween the BB and the -C-60#
Step * Insert the pins * and # A'lue4white in @# at one end o$ the (onitoring signal ca'le
# into the S,- !M port on the panel o$ the -C-60#& as shown in 2igure #/.
*0#36##6*? H!@EI Con$idential ,age#/& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
16/25
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
17/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
2igure #8 Inserting the (onitoring signal ca'le into the stac%ed ca'inet o$ the -C-60#
Step : !ttach a la'el to the (onitoring signal ca'le.
Step ? 2i> the interaction ter(inals in the inside ca'ling space at the right o$ the ca'inet.
//End
+nsta""ing t,e monitoring signa" ca"e 1 and # for t,e DCDU%01 ,en a 5#2V cainetand a %2$V cainets are stac4ed.
Step # Connect the 1/8 connector at one end o$ the (onitoring signal ca'le # to the ET6
!M0 port on the ,E (odule o$ the BB& as shown in 2igure #3.
Step * Insert the pins * and # A'lue4white in @# into the S,- !M ports on the panel o$ the
-C-60#& as shown in 2igure #:.
*0#36##6*? H!@EI Con$idential ,age#:& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
18/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
Step 3 Insert the pins and ? Aorange4white in @* into the interaction ter(inals.
Step / Insert the pins at one end o$ (onitoring signal ca'le * into the interconnection
ter(inals& as shown in 2igure #:.
Step 8 Insert the pins at the other end o$ (onitoring signal ca'le * into the S,- !M ports
on the panel o$ the -C-60#& as shown in 2igure #:.
2igure #: Installing the (onitoring signal ca'le # and * $or the -C-60# A*/D ca'inet
Step : Cut the (onitoring signal ca'le # to e>pose the pins : and 3 Aorange4white in @#.
Step ? Insert the pins : and 3 Aorange4white into the !M port on the connection unit o$ the
,S A-C4-C.
Step !ttach a la'el to the (onitoring signal ca'le.
Note
*0#36##6*? H!@EI Con$idential ,age#?& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
19/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
The installation o$ the (onitoring signal ca'le $or the -C-60# in the */ D single ca'inet is
si(ilar to that o$ the stac%ed ca'inets. ou onl) need to insert pins * and # in @# into the
S,- !M port on the panel o$ the -C-60#& and insert pins : and 3 into the !M port on the
connection unit o$ the ,S A-C4-C.
Step 9 2i> the interaction ter(inals in the inside ca'ling space at the right o$ the ca'inet.
//End
Installing the Monitoring Signal Ca'les $or the 2!
)*eration Procedures
Step # Insert the 1/8 connector at one end o$ the (onitoring signal ca'le into the MO0
port on the panel o$ the ,E.
Step * Insert the 1/8 connector at the other end o$ the (onitoring signal ca'le into the
COM I port on the panel o$ the 2!& as shown in 2igure #?.
2igure #? Installing the Monitoring Signal Ca'les $or the 2!
Step 3 !ttach a la'el to the (onitoring signal ca'le o$ the 2!.//End
Installing the Monitoring Signal Ca'le $or the EM!
,lease re$er to the H!@EI EM! ser Guide.
*.*.9 Installing the 12 Signal Ca'les
Installing the 12 u(pers
)*eration Procedures
Step # @hen cutting the 12 +u(per& )ou should lea"e 30c( o$ the +u(per $or ease o$ ca'ling
*0#36##6*? H!@EI Con$idential ,age#& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
20/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
on the upper ca'inet in case that the ca'inets are stac%ed $or capacit) e>pansion.
Step * Connect one end o$ the +u(per to the +u(per connector at the $eeder side.
Step 3 Connect the -I connector o$ the +u(per to the !T port on the panel o$ the -12
(odule& as shown in 2igure #.
2igure # Connections o$ 12 +u(pers $or a single ca'inet
Step / Tighten the -I connector ') using the ad+usta'le wrench.
//End
Note
I$ a single ca'inet is installed& the 12 +u(pers are routed along the le$t and right ca'le
troughs. I$ two ca'inets are stac%ed& the 12 +u(pers in the lower ca'inet are routed along thele$t and right ca'le troughs& and the 12 +u(pers in the upper ca'inet are routed in $ront o$ the
-12 panels.
,lease re$er to the design $ile o$ each pro+ect to see the connection o$ the 12 signal ca'les
'etween -12s.
*0#36##6*? H!@EI Con$idential ,age#9& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
21/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
!ttaching Color 1ings
2igure #9 !ttaching Color 1ings
*.3 Chec%ing the Installation o$ the BTS3900 Hardware
Chec% the installation ualit) o$ the hardware according to the ternal power input "oltage is in the range o$ 63./D -C
68?D -C.
,ower on the (odules and chec% the indicators status according to BTS3900 Co((issioning
Guide.
*0#36##6*? H!@EI Con$idential ,age*0& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
22/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
*./ Co((issioning o$ BTS3900
,lease test the $ollowing ite(s and record the results in On6site Co((issioning 1eport.
*./.# ocal Maintenance
Prereuisites
The I, address and the su'net (as% o$ the Site Maintenance Ter(inal ,C are set. The I,
address o$ the Site Maintenance Ter(inal ,C and the I, address
A#9*.#:.0.?*4*88.*88.*88.0 o$ the BTS are on the sa(e networ% seg(ent.
)*eration Procedures
Step # se the crosso"er ca'le to connect the Site Maintenance Ter(inal ,C to the BTS.
Connect one end o$ the ca'le to the ETH port on the (ain control (odule o$ the(ain ca'inet& and connect the other end o$ the ca'le to the Ethernet ca'le port on
the Site Maintenance Ter(inal ,C.
Step * Open the co((and window.
I$ the operating s)ste( o$ the Site Maintenance Ter(inal ,C is @indows 9&
choose StartJ ,rogra( J MS6-OS ,ro(pt. The co((and window is displa)ed.
I$ the operating s)ste( o$ the Site Maintenance Ter(inal ,C is @indows
*0004,& choose Start J 1un. In the 1un dialog 'o>& run the c(d co((and.
The co((and window is displa)ed.
Step 3 1un the ping targetKna(eco((and to "eri$) the networ% connection 'etween the ,C
and the BTS. AtargetKna(e indicates the I, address o$ the BTS.
I$ the in$or(ation si(ilar to that in the $ollowing e>a(ple is returned& the MT ,C and
the GB!M can co((unicate nor(all). In this e>a(ple& the I, address o$ the e>ternal
networ% is #9*.#:.0.?*.
,inging #9*.#:.0.?* with 3* ')tes o$ data
,inging #9*.#:.0.?* with 3* ')tes o$ data
1epl) $ro( #9*.#:.0.?* ')tesL3* ti(eL#(s TTL*83
1epl) $ro( #9*.#:.0.?* ')tesL3* ti(eL#(s TTL*83
1epl) $ro( #9*.#:.0.?* ')tesL3* ti(eL#(s TTL*83
1epl) $ro( #9*.#:.0.?* ')tesL3* ti(eL#(s TTL*83
,ing statistics $or #9*.#:.0.?*
,ac%ets Sent L /& 1ecei"ed L /& ost L 0 A0 loss&
!ppro>i(ate round trip ti(es in (illi6seconds
Mini(u( L #(s& Ma>i(u( L #(s& !"erage L #(s
Step / Start Site Maintenance Ter(inal S)ste(. The path is
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
23/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
Step 8 !$ter success$ul co((unication 'etween local (aintenance ter(inal and BTS& set the
co((unication port para(eter to ed phoneN
*0#36##6*? H!@EI Con$idential ,age**& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
24/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
Ms to other operators; MS.
Step 3 Hando"er test $or inter6cell in the sa(e site.
Step / 1epeat step# to step3 to test the other cells.
Step 8 ,S call testing& including SMS4MS& we' sur$ing and downloading.
*./.? En"iron(ent !lar(s Testing
Test the en"iron(ent alar(s with the cooperation o$ the BSC engineers.
*0#36##6*? H!@EI Con$idential ,age*3& Total*:
-
8/13/2019 GSM BTS3900 Onsite Engineer Operation Guide-20080728-IsSUE1.0
25/25
GSM BTS3900 Onsite Engineer Operation Guide Internal
6ttac,ment
1e$erence and ,ath $or -ownloading
# BTS3900 5uic% Installation Guide AD300100K0*
* BTS3900 GSM ,roduct -escription AD300100K03
3 BTS3900 GSM Hardware -escription AD300100K03
/ BTS3900 GSM Co((issioning Guide AD300100K03
Pat,7-ocu(entation 6J @ireless ,roduct ine 6J GSM6BSS 6J GSM6BTS 6J
,roduct Manual 6J BTS3900 GSM 6J D300100
8 GSM H!@EI BTS3900 -eplo)(ent Guide6D#.0
Pat,7-ocu(entation 6J @ireless ,roduct ine 6J GSM6BSS 6J GSM6BTS 6J
Technical Guide 6J -eplo)(ent Guide
: H!@EI EM! ser Guide6AD#00100#K0:
Pat,7 -ocu(entation 6J @ireless ,roduct ine 6J @ireless ,u'lic 6J @ireless
,u'lic ,roducts 6J ,roduct Manual 6J EM!
*0#36##6*? H!@EI Con$idential ,age*/& Total*:
http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=searchManualTableOfContents&node=000001380805&colID=ROOTENWEB%7CCO0000000173&web_doc_id=SE0000329265&doc_type=null&p_line=29-7http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=searchManualTableOfContents&node=000001380805&colID=ROOTENWEB%7CCO0000000173&web_doc_id=SE0000329263&doc_type=null&p_line=29-7http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=searchManualTableOfContents&node=000001380805&colID=ROOTENWEB%7CCO0000000173&web_doc_id=SE0000329262&doc_type=null&p_line=29-7http://support.huawei.com/support/DocView.do?doc_id=SE0000331566&doc_type=123-2http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=searchManualTableOfContents&node=000001380805&colID=ROOTENWEB%7CCO0000000173&web_doc_id=SE0000329263&doc_type=null&p_line=29-7http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=searchManualTableOfContents&node=000001380805&colID=ROOTENWEB%7CCO0000000173&web_doc_id=SE0000329262&doc_type=null&p_line=29-7http://support.huawei.com/support/DocView.do?doc_id=SE0000331566&doc_type=123-2http://support.huawei.com/support/pages/kbcenter/view/product.do?actionFlag=searchManualTableOfContents&node=000001380805&colID=ROOTENWEB%7CCO0000000173&web_doc_id=SE0000329265&doc_type=null&p_line=29-7