grippers rotary actuators linear actuators linear guides ...two-jaw, self-centering parallel gripper...

GrippersRotary ActuatorsLinear ActuatorsLinear GuidesElectric Actuators

www.GimaticUSA.com • USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

®

by

General Grippers page 4

OEM Replacement Grippers page 8

Specialty Grippers page 12

Rotary Actuatorspage 14

Linear Actuatorspage 16

Pneumatic and Electric Linear Guides and Actuatorspage 20

Electric Grippers page 10

About Gimatic page 22

2 www.gimaticUSA.com

USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

Using Gimatic USA’s interactive catalogs online is easy - just like paging through our paper catalogs - but with added benefits. Our online catalogs provide you with the most up-to-date information and new products as soon as they are added! Hotlinks in the table of contents and product sections make navigation easy and fast. You can also search by key-word, or part number. Bookmark your favorite items and add comments on e-sticky notes. Print and share pages. Try Gimatic USA’s interactive online catalogs today.

View our Online, Interactive Catalog!

www.GimaticUSA.com

3

®

by

General GrippersThese top-performing, classic grippers offer a wide variety of design features and provide solid performance at a good price. Maintenance and lubrication free from 10 million to 40 million cycles.

SX Two- and 3-Jaw Parallel Self-Centering Gripper• Designed for use in harsh environments• Completely sealed, with IP67 protection class• Very high grip force• Sensor ready

3-Jaw SXT

2-Jaw SX


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

GMTwo-Jaw Self-Centering Gripper• Double acting• Wide choice of stroke lengths and gripping force options• Gripping force is constant on both directions along the

entire stroke• Sensor ready

SZTwo-Jaw, Self-Centering Parallel Gripper• Double acting• Patented self-centering system• Multiple options for mounting and porting• Sensor ready

5

®

by

General GrippersPETwo-Jaw, Self-Centering Parallel Gripper• Double acting (single acting available on

PE25 and PE45 units)• Gripping force is constant in both directions

the entire length of stroke• Light weight alloy construction• Sensor ready


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

MGXTwo-Jaw, Self-Centering Parallel Gripper• Double acting• Robust guide in a flat profile design• Sensor readyWhen comparing the MGX to competing grippers with the same stroke, the MGX has higher grip force, lighter weight, smaller size, and lower price.

XP, XT, XA, XRSelf-Centering Grippers• Double acting• Excellent cost/performance ratio• Lightweight alloy and plastic resin construction• Sensor ready• Gripper can be mounted on two sides

7

®

by

OEM Replacement GrippersInterchangeable with other OEM grippers for mounting dimensions, fingers, feeding ports, etc. But the internal construction is optimized giving better performance & grip force. Lower prices compared to OEM competitors.

GSParallel Gripper• Double acting• Stroke is 4.6mm to 30mm• Patented adjustable backlash system• Available in Spring Open or

Spring Closed models• Sensor ready• 10 million cycles maintenance free

GWSelf-Centering Rocking Gripper• Double acting• Stroke is 2x20°• Sensor ready• 20 million cycles maintenance free

GXSRadial Gripper• Double acting• Stroke is 2x92°• Very high gripping force at the end

of the closing stroke• Multiple mounting options• Sensor ready


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

SGP-SParallel Gripper• Double acting• Stroke is 4mm to 12mm• Patented adjustable backlash system• Multiple mounting and porting options• Sensor ready• 20 million cycles maintenance free

PQ• Robust guidance • Strokes from 15mm to 63mm• Sensor ready• 10 million cycles maintenance free

DH Series and TH Series• Double acting with Normally Open or

Normally Closed option• Two jaw stroke range is 4mm to 8mm• Three jaw stroke is 2.5mm to 16mm• 20 million cycles maintenance free• Sensor ready

Two-jaw DHThree-jaw TH

9

®

by

Electric Grippers & Actuators

• No electricity is used when gripper is engaged.

• Gripper retention guaranteed in power loss.

• Long-life brushless DC motor.

• Built in motor driver.

• Operates on 24 volt DC and uses a simple ON/OFF signal from your PLC.

• M8x1, 3 poles standard connection.

• Self-centering jaw system (patented) on many grippers.

• Fiber-carbon gear reduction.

• Maintenance-free for 10 million cycles.

• Optimal force, weight, and dimensions ratio.

• Operating temperature range: 41°–140°F.

• Can be mounted to a rotary actuator without a special mounting plate.

• Optional magnetic sensors.

• NPN versions available upon request.

The carrier with the springs is driven by a 2-stage reducer and a worm. The carrier drives two jaws with a patented self-centering mechanism--already tested in other Gimatic grippers.

A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.

Electric Grippers and Mechatronics Mechatronics is the combination of mechanical engineering, electronic engineering, and information technology in order to design and manufacture useful, more reliable and innovative products.

Gimatic’s electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

Plug & Play User-Friendly Electric Grippers and Rotary Actuators

Electric Rotary Actuators• Capable of 90° or 180° rotation• Same features as the electric grippers• Can be fitted to a gripper without a special mounting plate• Sensor ready• 10 million cycles maintenance free

2-Jaw Angular Self-Centering Electric Sprue Gripper• Self-centering jaw system (patented)• Sensor versions available• 10 million cycles maintenance free

MPBS gripper series is perfectly compatible with MRE rotary series actuators without any special plate.

11

®

by

Specialty GrippersTFA• Single acting with spring opening• Optional suspension kit• Easily mounted on profile

framing using standard Gimatic 10mm, 14mm, or 20mm clamps

PS-P• Double-acting radial motion• Constructed of lightweight alloy• Well protected against dusty environments• More than two sensors can be mounted to

them, giving these grippers added versatility• Sensor ready• 10 million cycles maintenance free


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

MFD/MFUExpansion Gripper for ID Gripping• Silicone or EPDM expander• Grip diameters from 8 to 85mm• Options include nose cones for centering and

proximity magnetic sensors• Several mounting accessories available

MFD models compress and expand with a downward movement.

MFU models compress and expand with an upward movement.

HSHigh-Speed Gripper• Specially suited for high-speed operation• Very fast opening/closing time• Lightweight• Sensor ready• 10 million cycles maintenance free

PTNeedle Gripper• New PT-28 has PTFE pad for hot surface contact• Suitable for textile and food industries• Double acting• The stroke for the four or eight needles can be

adjusted simultaneously• Several mounting accessories are available• 10 million cycles maintenance free

13

®

by

Rotary Actuators

RT• Rack and pinion patented movement• Continuously adjustable stroke• Large ball bearings on the shaft• Through hole in the pinion

Our Rotary Actuators have continuously adjustable angles and as many as four intermediate stops using the RTD unit with the RT Series. Both the RT and R Series are sensor ready and are warranted for 10 million cycles maintenance and lubrication free.

All units have end-of-rotation accessories available.

RTD Intermediate Stopping Units


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

RT• Rack and pinion patented movement• Continuously adjustable stroke• Large ball bearings on the shaft• Through hole in the pinion

R-Series• Suitable for 90° or 180° rotation angles• Integrated rotating distributor of compressed air• Both side and bottom porting is standard

ITSC Pneumatic Indexing Tables• Available in two sizes with 4, 6, or 8 positions• Clockwise or counter clockwise models• High torque• Suitable for heavy loads• Reduced weight and overall dimensions

Shock AbsorbersDissipate kinetic energy and get shorter indexing times using one or two shock absorbers.

15

®

by

Linear ActuatorsOur Linear Actuators range in stroke from 10mm to 2000mm. All are sensor ready and warranted for 10 million cycles maintenance free. No lubrication required.

ZX• Double acting• Very high performance/cost ratio• Constructed of a light alloy and

plastic resin making it lightweight• High rigidity

ZE-P• Piston bore 6mm, 10mm, or 16mm• Stroke 10mm, 20mm, 30mm• Double acting• Internal bumpers


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

ZA-Series• Bore 2x8mm, 2x16mm, or 2x20mm• Stroke 25mm, 50mm, 100mm,

150mm, and 200mm• Double acting• Very favorable performance/price ratio• Optional end-stroke adjusters

ZA Linear Actuators partially extended.

17

®

by

Linear ActuatorsL40• High rigidity and defection resistance• Up to 66lbs on the carrier• Patented guidance with recirculating ball bearings• Patented belt drive• Hydraulic shock absorbers

on the carrier are standard

Z-Series• Bore 2x8mm, 2x16mm, or 2x20mm• Stroke 25mm, 50mm, 100mm, 150mm,

and 200mm• Double acting• Very favorable performance/price ratio• Shock absorbers available


T40

GM25GM50

S25

M25

M25

P25P25

USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

Gimapick Modular Pick-and-Place Actuators

• Modular - Standard components are used to configure a pick and place robot to suit your application needs

• Standardized - Interface kits allow easy connection because components have standardized mounting patterns

• Convenient - Air lines are internal in the components to make connection easy and neat

• Economical - Use the Gimapick pneumatic components with standard valves and a programmable controller for a low-cost system.

19

®

by

Linear GuidesThese are available in lengths up to 6000mm and are powered by ISO cylinders, rodless cylinders, linear motors, magnetic drives, Omega transmission, or belt drives. Gimatic Linear Actuators feature a patented bearing system and are sensor ready with a 10 million cycle life maintenance and lubrication free.

LL• Patented bearing system• Easily mounted and inexpensive• Available in lengths up to 6000mm• Several mounting options with t-nuts• More than one carrier can be fitted

to each rail

For ISO cylinders For rodless cylinders Omega transmission

Belt drive and pulleysFor rodless cylinder magnetically coupled

Visit GimaticUSA.com for more drive interfaces.


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

Electric Linear Actuators and GuidesLV Electric Linear Actuator &LVP Electric Linear Guide

• Integrated linear motor• Integrated encoder sensor• Recirculating ball-bearing guide system• LV Stroke 50, 100, 150, and 200mm• LVP Stroke 200, 300, 400, 500, 700, and

1000mm• T-nut mounting• M12 standard electrical connection• Compatible with several drivers available

on the market• Optional weight compensators• Optional magnetic homing sensors

21

®

porby

Gimatic USA is headquartered near Cleveland, Ohio, and has served the North American market with Gimatic components and systems for more than 10 years. Serving the assembly, packaging, robotics, and general automation industries, Gimatic USA provides components for a wide range of parts handling needs including pick-and-place robots, grippers, actuators, and end-of-robotic-arm tooling. We maintain an extensive inventory of Gimatic products so most orders can ship the day you place it.

Gimatic is a highly respected European manufacturer of pneumatic and mechatronic automation components and plays a leading role in producing grippers, linear slides and rotary actuators for parts handling customers around the world. In more than 25 years, Gimatic has achieved ISO 9000 Certification, designed and built more than one million grippers, and owns more than 200 patents.

About Gimatic


USA +1 (216) 535-4811 • Mexico +52 (81) 8386-2800

Gimatic USA provides the North American industrial automation market with the wide range of advanced Gimatic handling products and develops new problem-solving technologies for parts handling.

23

Gimatic USA28300 Euclid AvenueWickliffe, Ohio 44092Phone: [email protected]

Gimatic S.p.AVia Enzo Ferrari25030 Roncadelle Brescia, [email protected]

Gimatic MéxicoPrivada Artemio Elizondo 1026 Parque Industrial Elican Ciudad Apodaca, Nuevo León, 66603Teléfono: +52 (81) [email protected]

© 2

017

EMI C

orpo

ratio

n

grippers rotary actuators linear actuators linear guides ...two-jaw, self-centering parallel gripper...

Documents