grind no more - rest assured€¦ · you have created your custom dental guard for nighttime...
TRANSCRIPT
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK
CONTACT US:www.RestAssuredTonight.com
1-877-216-REST (7378)Monday - Friday 9am to 4pm EST
Distributed by Ranir, LLC4701 East Paris Avenue SE • Grand Rapids, MI 49512
©2019 Ranir, LLC 90496AB
Made in USA
• You have loose teeth or a change in your bite that lasts more than a few minutes after removing
• The dental protector has been worn or bitten through or shows signs of excessive wear
RELIEF IS MINUTES AWAY!You have just made an important investment in your smile and your health!You can now custom fit the moldable dental guard made of a soft upper layer that is molded to your teeth and a hard base that prevents people with mild to moderate bruxism from biting through.DENTAL GUARD AND TRAY OVERVIEW
STORAGE AND CAREA. Please note that it may take 1 to 2 weeks to get used to wearing the dental
guard. If you are still not satisfied with the fit after the 1 to 2 week adjustment period, please follow the instructions to receive a replacement dental guard.
B. Rinse your dental guard after each use with cold water. Do not rinse with hot water.
C. Store your dental guard in the ventilated case provided when not in use. D. For further cleaning, you may brush your dental guard periodically with a
soft toothbrush.
CONGRATULATIONS!You have created your custom dental guard for nighttime grinding of teeth.
IMPORTANT NOTES:• The dental guard has been designed to be worn comfortably through the night. If pain does occur, immediately remove and stop using the device and confer with your dental professional. It may take 1 to 2 weeks to become accustomed to wearing the dental guard.
• This product does not contain latex or silicone. • Designed to be used for up to 3 months.
GUARANTEED TO FITThis dental guard has been developed and designed to ensure an excellent fit on the first try. Please note that it may take 1 to 2 weeks to adjust to wearing it. The best success is achieved by wearing the dental guard consistently during this adjustment period. If you are still not completely satisfied with the fit and comfort of the dental guard and you would like to try to fit it again, we’ll send you a new one. Just contact us and our representatives will walk you through getting a replacement product as soon as possible (within 3 weeks).
Additional support and information on fitting the product and adjustments can be found at www.RestAssuredTonight.com
If you are not satisfied with the fit, go back to the beginning and repeat the entire fitting process starting at Step 1 (Set Up & Practice Fitting).
NOTE: Do not put dental guard in a cup of cool water more than once.
If you have trouble fitting your dental guard, we suggest re-watching the fitting video at www.RestAssuredTonight.com or calling 1-877-216-REST (7378), Monday-Friday, 9AM to 4PM EST for assistance.
B. Bite down firmly on the dental guard with your upper teeth positioned correctly. Hold this bite for 30 seconds. During this time, use the thumb and forefinger of each hand, shape the dental guard around your upper teeth and up to the gum line by pinching evenly around the arch from the front teeth to the molars.
STEP 2: Pick a Heating Method:Heating Method 1: Microwave Dental Guard in Water
A. What You Will Need to Begin:• Water (Do not use distilled water!)• Metal fork• Mirror• Timer or clock indicating seconds• Small plate• Microwave or stove• Microwaveable bowl or stove pot
B. Insert the dental guard into the tray byplacing the flat side of the guard againstthe tray, with the “channel” side up. Pushfront of dental guard fully under retaininglatch.
C. While looking in a mirror, practice positioning the tray loaded with the dental protector in your mouth.
I. Pinch the Width Adjustment Tabs to find an appropriate fit.
II. Use the Center Alignment Guide as a “stopper,” ensuring your front teeth are as close as possible to the front of the dental guard.
III. Also, use the Center Alignment Guide to align the loaded tray to the middle of your front two teeth.
Before starting, it is recommended that you watch the fitting video at www.RestAssuredTonight.com.
INDICATIONS FOR USE: This dental guard is indicated for protection against bruxism or nighttime teeth grinding. The device is intended to reduce damage to teeth and prevent noise associated with bruxing or grinding.
WARNINGSDo Not Use:• If you are under 18 years of age• If you wear braces or other dental appliances• If you have loose teeth• If you have been diagnosed with temporo-mandibular joint (TMJ) problems or
severe tooth clenching or grinding• If you are currently experiencing pain in the mouth or jaw because of tooth
clenching or grinding• As an athletic mouth guard; the dental protector does not absorb shock• As a device for the treatment of snoring or sleep apnea• For more than 3 months from initial use without consulting your dentist. See
your dentist every 6 months thereafter while using this product.
ASK A DENTIST BEFORE USE IF YOU HAVE:• Loose caps or fillings, or cavities without fillings• Clicking of your jaw• Pain in your teeth, jaw, face, or if you have trouble chewing• Two or more missing teeth• Sores in your mouth• Disease or bleeding of the gums• Serious breathing, respiratory, or other health problems
DISCONTINUE USE AND CONSULT A DENTIST IF:• The same symptoms continue after several weeks of use• The dental protector easily falls out of your mouth• The dental protector is uncomfortable or causes you to gag• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector• You have soreness, bleeding, or other reaction inside of your mouth• You notice new symptoms such as pain in your jaw, teeth, ear, neck stiffness,
headache, or joint clicking after using the dental protector
Dental Guard
Front
Channel
Disposable Fitting Tray
Width Adjustment Tabs
Hook
CenterAlignmentGuide
RetainingLatch
FITTING INSTRUCTIONS
For a BetterNight’s Sleep
®
CLASSIC DENTAL GUARD
Grind No More
Reliable Protection
RetainingLatch
1. Measure 1 cup (8 oz) of cool water and pour into microwave safe bowl. Do not use distilled water. Place the loaded fitting tray face down in the water and heat on high for 2 minutes (for low wattage microwaves heat for 3 minutes, 15 seconds).
3. Place the metal fork through the Hook and remove the loaded tray from the boiling water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
2. Remove the bowl of water from the microwave. Bowl may be hot. Use caution when removing.
2MIN
STEP 2: Pick a Heating Method continued:Heating Method 2: Boil Water Separately
1. Using a stovetop, bring water to a full rolling boil and let boil for 1 minute. Do not use distilled water.
2. With the dental protector inserted into the tray, drop into the boiling water, with the top (channel) side of the tray down and boil for EXACTLY 60 seconds.
STEP 3: Bite & Shape:A. Place the dental guard on your upper teeth. Without
biting down:
1. Hold the tray by the handle and insert into your mouth with the “channel” side up.
2. Use the Width Adjustment Tabs to find an appropriate fit.
3. Use a mirror and the CenterAlignment Guide to position the dental protector in the middle of your two front teeth. Position the tips of your front teeth as close as possible to the front of the channel, using the Center Alignment Guide as a stopper.
C. After shaping, maintain the dental guard in position for 30 seconds before removing.
D. Once a good fit has been achieved, remove the loaded tray from your mouth and place it in a cup of cool water for 30 seconds to allow the impression to set. (Note: If you are not satisfied with the fit, DO NOT place dental guard in a cup of cool water. Please see below.) Remove from water, then remove the dental protector from the tray by gently pulling the ends from each side of the fitting tray, working towards the front. Note the dental guard may feel slightly sticky during this process. Once you are satisfied with the fit, dispose of the tray. Do not use the dental guard while loaded in the tray.
3. Place the metal fork through the Hook and remove the loaded tray from the bowl of water. Place the loaded tray channel-side up on the small plate for 30 seconds to cool. Do not touch while it cools.
STEP 1: Set Up & Practice Fitting:To assure the best fit, BEFORE starting your custom fitting:• Please read the following instructions COMPLETELY in order to achieve the
best fit. You can also view a video of how to fit the dental protector by going to www.RestAssuredTonight.com. Assemble all the materials needed before starting to actually fit the product.
• Brush your teeth and rinse your mouth thoroughly to avoid transferring debris from your mouth to the device during the fitting process.
SIDE 1
FOLD FOLD FOLD FOLD
SIDE 2
FOLD FOLD FOLD FOLD
DIELINEDO NOTPRINT
BRAND
Ranir/PL Grind No More Classic Instruction Insert298BRAND CODE PRODUCT
MPSPRINTER
OffsetPRINT METHOD
50# Husky OffsetSTOCK
June 13, 2019DATE MODIFIED
none
flat: 15” W x 4.5” H (folded: 3“ x 2.25”)
COATING
EWARTIST
DIMENSIONS
90496ABPART NUMBER
N/ADIE LINE NUMBER
NEW REVISED
Color Proof colors are not exactly matched to Pantone® colors.Refer to your PMS book for exact Pantone® colors.
PANTONE®
2758PANTONE®
2995BLACK