green power solutions project portfolio

[email protected]: 718-744-7625Fax: 646-722-7176

Project Portfolio

Confidential Material Property of Green Power Solutions, Inc.

Project Portfolio

Thomas Gately(718) 744-7625

[email protected]

1


Solar Integrators

Design Specialists


Solar Integrators

Additional Installations

2


About Green Power SolutionsGreen Power Solutions was founded by Thomas Gately in 2006 and is an incorporated company in the state of New Yorkheadquartered in Manhattan and having service locations out of Queens, Long Island andNew Jersey.

Green Power Solutions is a fully listed installer in the following states and jurisdictions: NYSERDA (NY State), PA Sunshine Program,MA Clean Energy Program, Wisconsin and in the process of adding others. Through various strategic partnerships throughout theNortheast and indeed the country, we also have access to other state programs andlicenses as needed to develop and/or install projects.

Although Solar PV and solar thermal are Green Power Solutions’ primary activities, the company also provides commercial fuel cellsolutions and combined heat & power in conjunction with a partner – Green Powerbeing primarily responsible for projectdevelopment and arranging financing. Green Power Solutions also does residential energy audits and provides energy efficiencysolutions such as insulation, energy monitoring and lighting solutions.

ThomasGatelyhasbeeninvolvedin thesolarindustrysinceabout2002havingstartedasaninstallerfor a numberof solarcontractors

Confidential Material Property of Green Power Solutions, Inc. 3

ThomasGatelyhasbeeninvolvedin thesolarindustrysinceabout2002havingstartedasaninstallerfor a numberof solarcontractorsin the Tri-state area. He has worked in just about all aspects of project implementation including the mechanical and electricalinstallation, roof preparation, repair and replace, utility interconnection, site assessment, project design and development. Thomas alsoenjoys teaching solar design and implementation part-time at the City University of New York (CUNY) and for other institutions.Thomas is also actively involved in the development of a number of solar / sustainability non-profit projects and organizations such aswith Global Green Aid and Strive for Solar.

Green Power Solutions has approximately 3 core activity teams consisting of project design (structural engineering, architecturaldesign, electrical design), project development (admin, permits, interconnection , financing etc.) and installation/integration(mechanical & electrical install, project management).

We have a full dedicated team of designers, engineers, master electricians/ plumbers, install technicians and consultants ready foryour project to design and build your system to the highest standards that will lastfor years to come.


About Green Power SolutionsMission StatementTo deliver the best quality sustainable solutions to the residential, commercial, industrial, non-profit and governmentsectors.

To present courteous knowledgeable consultants, designers and install technicians throughout the full process – contracting,design and construction.

To take an environmentally responsible and holistic approach to green solutions that we recommend. Therefore, we look atthe efficiency of your building and its internal energy loads system and make not just recommendations on renewableenergy technologies but also on how to reduce overall energy needs and demand by efficiency and monitoring.


To tackle complicated projects that most other solar integrators willnot consider taking on. We are renowned forconstructing challenging systems, custom designed systems that require additional reinforcement above and beyond normalinstallation requirement such as full coverage car port structures, on roof canopies riding over AC and other equipment,split solar thermal systems for hot water, heating and pools, off-grid and emergency back-up power systems.

Our GuaranteeWe are a very detailed oriented team. Since solar modules are warrantedfor 25 years and modules are designed andexpected to last at least 30 years, we design and install the rest of the system with the best materials to last that same period.


Design Specialists



Aerial View Design


Originally 300 kW Final 704kW- Moonachie, NJ


Aerial View Design


Originally 300 kW Final 704kW- Moonachie, NJ

Partners – Solis & Allied


Aerial View & Resulting 3D Model


135 kW - Fordham Road, Bronx, NY


85’

21’

Usable Area 1

41’29’

Usable Area 141’ x 23’ = 943 Sq FtSystem Size Area 1: 11.3kW’s

Preliminary Analysis for an East 117th Street Multi-family, New York


36’Usable Area 115’ x 30’ = 450 Sq FtSystem Size Area 1: 5.4kW

Potential System Size for this East 117 th St site: 16.7 kW’s Produces 18,370 kWh’s/Yr

A simple square footage of estimated available and suitable space is calculated from satelliteimagery. It from square footage calculations, we can quickly estimate what a roof or area wouldaccommodate in nominal wattage and calculate it production based on location, tilt andorientation. This can quickly tell you the prospective client whether solar is suitable for you or not.


Architectural Design


300 kW - Moonachie, NJ


Initial Layout & Site Plan




Ballast System - Mechanical Design Specification90 kW – Morrisville Farm – Genmount Ballast System


300 kW - Moonachie, NJ – Unirac G10 racking

Green Power Solutions provides a full set of drawings and illustrations if needed as well as system sizing estimates, shade analysis, solar irradiance and power production analysis, electrical 3-line diagram and structural plans among other thing. Much of this information is needed for filing with the city, state program and utility.


System Wire Run Diagram




Electrical Three Line Diagram




Physical Wiring Diagram




Electrical Plan-CAET-50kW Whitestone, Queens, NY


This is the Electrical three-line diagram design for the 50kW Whitestone project. For the most part, it consists of 2Strings of 12 Modules feeding 9 different inverters thereby providing plenty of redundancy as per client request.


CAET, Whitestone, Queens, NY – 50 KW SolarWorld & SMA PV System


50 kW System using SolarWorld Modules on Commercial Property

Whitestone, Queens, NY

17


Berry Street, Williamsburg, Brooklyn, NY – Illustrat ion of 50kW PV System


This is an illustration provided to client with associated layout, structural design

plans for a 50 kW PV System. System includes Schucco Modules and SMA inverter.

18


Town of Harford, CT – Town Square Carport


The Town of Hartford Carport project was developed by Green Power and SENY Corp.




Green Power Solutions was responsible for structural analysis of the buildings roof car park area to determine if it could take a carport structure of this type as well as electrical plans and layout / architectural plans. We also coordinated permitting and utility interconnection.


Center County Airport Car park – State College, PA



Center County Airport Car park – State College, PACenter County Airport Car park – State College, PA



Shading Analysis


9 kW - Alpine, NJ


Panel Layout Diagram


9 kW - Alpine, NJ


Electrical Three Line Diagram


9 kW - Alpine, NJ


Solar Integrators



Portfolio SampleThis is a small sample of solar electric (photovoltaic) and solar thermal projects we have design and/or installedthroughout NYC, NJ, PA, CA and Europe. Many of our solar photovoltaic systems have included a battery backupemergency power component to them. We also provide fuel cell and wind technology solutions. We have workedon many LEED and Passive House projects where with our partners have provided many of the above mentionedsolutions as well as green roof installation and rain water harvesting. We also do energy efficiency work withclients such as energy audits & lighting. We can also arrange specific project financing where desired.



Solar Electric Portfolio



Senior Community Center – Clarence, NY (suburban Buf falo) – 50kW PV


50 kW PV System on Senior Center at Clarence, Buffalo, NY

Using REC Modules & 3 x 15 kW Solectria Inverters

32


Senior Community Center – Clarence, NY (suburban Buf falo) – 50kW PV


50kW PV System installed at a Senior Center at Clar ence, Buffalo area, NY. The system was run to 3x 15kW Solectria inverters wh ich were installed on a

concrete pad outdoors. System installed in 2011.


Morrisville Farm, PA (suburban Philadelphia) – 90kW PV


This 90kW Ground Mount PV System is located on a farm in Morrisville where we have also completedanother 2 different systems totally about 250kW’s. In addition to the farms regular activities growing organiccorn, apple orchards and vegetables, this farm also has a dog day care nursery upon which we also installeda system, miniature golf course and driving range. This system is designed to offset the majority of the golfcourses power needs and all the system provide almost all the total farm! A central 80kW Satcon inverter wasused along with Solventi modules and the Genmount II Ballast Racking System.


Morrisville Farm, PA (suburban Philadelphia) – Farm Barn – 25 kW’s


This 25 kW system is mounted on a Morrisville Farm barn. The roof is a metal deck. Solventi modules were used on the barn aswell as the nursery and ground mount. Besides being a regular farm, they also organize educational events, hay rides and


Island Park Manor, Island Park, Long Island, NY – 28 kW PV


This 28kW Unirac Large Array (ULA) Racking Structure is installed on the roof of a 5 floor Disabled HomeCenter in Island Park, Long Island, NY. Despite the building height and system exposure on the Atlantic shore,it is designed to withstand minimum of 110 mile per hour winds. This elevated structure enabled us to installthe system above all the various roof vents and HVAC ductwork on the roof while also leaving roof for roof andmechanical equipment servicing. This ULA System can also be used for Ground Mount Installations. Note theold power generating plant in the background. Out with the OLD in with the NEW!!



15 kW PV System on Clinic at Somers Point, NJ

37


Gelbman / Bouratoglou Townhouse – Boerum area of downto wn Brooklyn, NY – ULA canopy


This PV system was contracted at the same time between Green Power and the owners of both adjacent townhouses allowing us to provide a canopy structure that spans across both buildings. This structure started at a minimum height of 10’ and tilted up to about 15’ which exempted us from fire path code rules. These are technically two separate projects with central inverters located in the basement of each townhouse. This system is rated to withstand a minimum of 110 mile per hour winds.

Inverter: PV Powered (2 – one per system) Racking Support System: Unirac ULA system

Module: Centrosolar 240 Watt modules Rack Rails: Unirac standard Rails & Clamps


Ballast System

(No Roof Penetration)


60 kW - Newark, NJ (During Construction)

(No Roof Penetration)

39



10 kW - Bridgeton, NJ (Ground Mount)

40


BeforeAfter


10 kW - Pitman, NJ

41




50 kW System using SolarWorld Modules on Commercial Property

Whitestone, Queens, NY

42




50 kW System using SolarWorld Modules at Whitestone, Queens, NYNo Penetration with Ballast System or Conduit Run –

One Pitch Well Sealed Pocketed Penetration down to Electrical Room – Never return calls for leaks!

43




50 kW System at Whitestone, Queens, NY

9 Fronius Inverters processing power from an 18 strings array

44



7kW System on Bar in Ridgewood, Brooklyn, NY

45



100 kW - Hotel in Wildwood Crest, NJ

400 x 245 Watt Modules & 9 Fronius Inverters

46



This is a solar electric system installed on the roof of motel located on Ocean Avenue in Wildwood Crest, NJ.

The system is a 100 kW using over 400 modules. The system was installed at a 0 (zero) degree tilt thereby maximizing the possible system size that could be installed at this location.



100 kW – Hotel in Wildwood Crest, NJ

Inverters & Conduit Runs

48


System Designed to offset100% of the Landlord’sCommon Building Charges.

Racking system uses flanges as basesthat are penetrated directly into woodenroof rafters approximately every 4’-6’.

The roof penetration holes are injectedwith silicon sealant as lag bolts aredriven down into holes and a mesh addbetween the hole point and flange.Finally, a rubber sticky-back “patch”


Finally, a rubber sticky-back “patch”with soft reflective top is pressedaround the flange & upright pole.

2” Schedule 40 Galvanized Steeltubular upright pipes and bracing isused to build the framing system.

Unirac Large Area (ULA) Racking System.26 x Sharp Modules & 1x Fronius Inverters.

System completed in 2012.



The ULA racking System consists of strong 2” galvanized 10’ length pipe uprights screwed into threaded flanges that are installed into the roof rafters, cross pipes and heavy duty railing.



7kW PV System installed on a multi-family and Vet clinic on Fulton Street just off downtown Brooklyn, NY. Completed in 2011.

Custom designed Steel I-beam Dunnage System spanning across the building to the supporting walls installed to support the PV array. This level of System support is not always needed – depends on the underlying roof structure.


Clarke / MorraRivera Drive, Long Beach Island, NJ

10kW Solar PV System

Awarded LEED Platinum

Completed in 2011

Clarke Residence: LEED – PV, Solar Thermal, LED Ligh ting, Rain Water Harvesting, Motorized Blinds


PV System: Trina modules, Enphase Microinverters, Krannich Racking, New Service. System designed to offset 100% of electrical consumption.

Solar Thermal: For domestic hot water, assist central heating and extended summer season pool heating.

LED Lighting lights & Lutron controls with customized IPod control panel display and setting.

Motorized blinds with central controls to reduce temperature variances in house during summer and winter.

Rain Water Harvesting/Collection for garden irrigation.

Completed in 2011



10 kW - Colts Neck, NJ

53



10 kW - Lakewood, NJ

54


Moukarzel Residence – Avalon, NJ – 14 kW PV System


This South NJ shore project was installed using SunPower 327Modules for a total of 14kW’s with 2SunPower 7kW inverters. This was custom structural design as the roof beneath the array undulates.

55



4 kW - Hicksville, Long Island

56



5kW - Curtain Wall, Brooklyn, NY

Partner: Corvello57


Rio Vista Drive, Alpine, NJ – 9kW PV System


9 kW - Alpine, NJ


Solar Thermal Portfolio



18 Nobis / Stiebel Eltron Collectors

2x 400 Gallon Tanks in Basement (4 floors down)each with 2 Heat Exchangers for solar loop and heat distribution loop.

3-way valve ***************

Solar Pump Station - temp gauges, flow meter etc.

Expansion tank for excess working fluid during hot summer days.

Gindi Residence – East 4 th Street & Avenue U, Brooklyn


summer days.

Designed to provide all domestic hot water load, supplemental radiant floor central heating and swimming pool heat dump in summer.

Radiant floor heating is the ideal delivery system since it can provide very comfortable evenly distributed heat in a well insulated home at relatively low temperatures.

Solar Thermal Flat Plate Collectors System - East 4th Street & Avenue U, BrooklynInstalled in 2007 (During Construction Photo).



Solar Thermal – East 4th Street & Avenue U, Brooklyn, NY – During Construction - 2007



Solar Thermal – East 4th Street & Avenue U, Brooklyn, NY

This Radiant Floor Heating Install was part of a 16 collector solar thermal installation in a new construction home. Solar Thermal can work ideally with radiant floor / wall or forced air systems.


Community of The Holy Spirit Convent – Convent Avenu e, Harlem, New York


Solar Thermal – 8 Flat Plate Collector System – Convent Avenue, Harlem, NY

This 8 collector solar thermal is designed to offset on average across the year about 70% of the domestic hot water load of this Convents’ domestic hot water load.



Solar Thermal – Convent Avenue, Harlem, NY. PAW Solar Pump Station with Controller mounted on wall controls/monitors the flow rate, pressure and energy potential and collected. Two 119 Gallon Tanks with 2 heat exchangers in each tank store the energy.


Spring Lake Residence, Spring Lake (NJ Shore), NJ – 6 x 25 tube collectors


Solar Thermal – 6 x 25 Evacuated Tube Open Loop System - Spring Lake, NJ System designed to provide domestic hot water all year round, supplemental heating and swimming pool heat dump in summer. Often gains temperatures of over 200 degrees even in winter. 4 x 119 Gallon Solar Storage Tanks in basement.



Solar Thermal – 1 x 25 Evacuated Tube Open Loop System – Point Pleasant, NJ

System designed to provide about 80% domestic hot water all year round.Illustration shows all components of such a system. Great where space for additional solar storage tanks is limited in the vicinity of the existing back-up system.



Solar Thermal – 1 x 20 Evacuated Tube Open Loop System Collector - Milville, NJ

System designed to provide domestic hot water for family of 4 – 6 all year round offsetting about 80% on average across the year. No glycol, run off the direct cold water intake mains, heated up and fed back into the backup water heater in the boiler room.

green power solutions project portfolio

Documents

partner green power

solar design

solar industry

solar thermal

solar pv

solar integratorsadditional

lighting solutions

number of solar contractorsin