graphic case and modules maxillary module assembly ...synthes.vo.llnwd.net/o16/llnwmb8/us...
TRANSCRIPT
60.511.014, 60.511.015
MatrixORTHOGNATHIC™ PlATING SySTeM Specialized implants and instruments for orthognathic surgery.
Synthes CMF1302 Wrights lane eastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322
www.depuysynthes.com
© DePuy Synthes CMF, a division of DOI 2013. All rights reserved.J9488-C 11/13 DV
Limited Warranty and Disclaimer: DePuy Synthes CMF products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fi tness, are hereby disclaimed.
WARNING: In the USA, this product has labeling limitations. See package insert for complete information.
CAUTION: USA Law restricts these devices to sale by or on the order of a physician.
Not all products are currently available in all markets.
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario l5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
MatrixORTHOGNATHIC PlATING SySTeM GRAPHIC CASe AND MODUleS
Graphic Case and Modules
60.511.001 Graphic Case (with lid)60.511.002 Graphic Case lid60.511.003 Mandible Generic Module (with lid)60.511.004 Mandible Module lid60.511.005 Sagittal Split Plate Insert60.511.006 Screw, Drill Bit, Blade Insert
with recessed holes60.511.008 Maxillary Generic Module (with lid)60.511.009 Maxillary Module lid60.511.010 Chin Plate Insert60.511.011 Pre-bent Plate Insert60.511.012 90° and Oblique l-Plate Insert60.511.013 Anatomic l and Adaption Plate Insert60.611.014 Instrument Tray60.511.015 Trocar Instrument Insert
MatrixORTHOGNATHIC PlATING SySTeM GRAPHIC CASe AND MODUleS
Maxillary Module Assembly Mandible Module Assembly
60.511.008, 60.511.006, 60.511.011, 60.511.012 (stackable), 60.511.013 (stackable)
60.511.003, 60.511.006, 60.511.005, 60.511.010
ReFeReNCe CHART
Screws
MatrixORTHOGNATHIC PlATING SySTeM
Screwdriver Blades, Self-Retaining Head Thread Screw Type Diameter Lengths Diameter Pitch
Self-drilling 1.85 mm 4 mm–6 mm, 8 mm 2.65 mm 0.6 mm
Self-tapping 1.85 mm 4 mm–6 mm, 8 mm 2.65 mm 0.6 mm
10 mm, 12 mm, 14 mm, 3.0 mm 1.0 mm 16 mm, 18 mm
emergency 2.1 mm 4 mm–6 mm, 8 mm 2.65 mm 0.6 mm
10 mm, 12 mm, 14 mm, 3.0 mm 1.0 mm 16 mm, 18 mm
Lengths
For all screws 52 mm (short) 76 mm (medium) 96 mm (long)
Drill Bits, J-latch
1.4 mm Diameter
(for screw lengths 4 mm–18 mm)
J8838-B Matrix ORTHOGNATHIC Plating System GC Lid UNDERSIDE 60.511.002.01 11/25/08 kl PMS 129 Yellow, PMS 231 Pink, PMS 278 Blue, Black
STRENGTH GRADIENT
0.5 mm Thick Maxillary Plates 0.7 mm Thick Maxillary Plates 0.8 mm Thick Maxillary Plates
0.7 mm Thick Mandible Plates 1.0 mm Thick Mandible Plates
CASE 60.511.001 LID 60.511.002
Prebent Maxillary Plates
Maxillary Module (Insert Trays)
90° L-Plates and Oblique L-Plates
J8838-B Matrix ORTHOGNATHIC Plating System GC Lid UNDERSIDE 60.511.002.01 11/25/08 kl PMS 129 Yellow, PMS 231 Pink, PMS 278 Blue, Black
STRENGTH GRADIENT
0.5 mm Thick Maxillary Plates 0.7 mm Thick Maxillary Plates 0.8 mm Thick Maxillary Plates
0.7 mm Thick Mandible Plates 1.0 mm Thick Mandible Plates
CASE 60.511.001 LID 60.511.002
J8838-B Matrix ORTHOGNATHIC Plating System GC Lid UNDERSIDE 60.511.002.01 11/25/08 kl PMS 129 Yellow, PMS 231 Pink, PMS 278 Blue, Black
STRENGTH GRADIENT
0.5 mm Thick Maxillary Plates 0.7 mm Thick Maxillary Plates 0.8 mm Thick Maxillary Plates
0.7 mm Thick Mandible Plates 1.0 mm Thick Mandible Plates
CASE 60.511.001 LID 60.511.002
Anatomic L-Plates and Adaption Plates
J8838-B Matrix ORTHOGNATHIC Plating System GC Lid UNDERSIDE 60.511.002.01 11/25/08 kl PMS 129 Yellow, PMS 231 Pink, PMS 278 Blue, Black
STRENGTH GRADIENT
0.5 mm Thick Maxillary Plates 0.7 mm Thick Maxillary Plates 0.8 mm Thick Maxillary Plates
0.7 mm Thick Mandible Plates 1.0 mm Thick Mandible Plates
CASE 60.511.001 LID 60.511.002
Sagittal Split Plates With Adjustable Slider, Curved Plates, and Straight Plates
J8838-B Matrix ORTHOGNATHIC Plating System GC Lid UNDERSIDE 60.511.002.01 11/25/08 kl PMS 129 Yellow, PMS 231 Pink, PMS 278 Blue, Black
STRENGTH GRADIENT
0.5 mm Thick Maxillary Plates 0.7 mm Thick Maxillary Plates 0.8 mm Thick Maxillary Plates
0.7 mm Thick Mandible Plates 1.0 mm Thick Mandible Plates
CASE 60.511.001 LID 60.511.002
Chin Plates and Auxillary Space
0.5 mm 0.7 mm 0.8 mm+
Matrix Strength Gradient
Mandible Module (Insert Trays)
Note: All Matrix screws are titanium alloy (Ti-6AI-7Nb). All MatrixORTHOGNATHIC plates are commercially pure titanium.
60.511.014, 60.511.015
MatrixORTHOGNATHIC™ PlATING SySTeM Specialized implants and instruments for orthognathic surgery.
Synthes CMF1302 Wrights lane eastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322
www.depuysynthes.com
© DePuy Synthes CMF, a division of DOI 2013. All rights reserved.J9488-C 11/13 DV
Limited Warranty and Disclaimer: DePuy Synthes CMF products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fi tness, are hereby disclaimed.
WARNING: In the USA, this product has labeling limitations. See package insert for complete information.
CAUTION: USA Law restricts these devices to sale by or on the order of a physician.
Not all products are currently available in all markets.
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario l5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
MatrixORTHOGNATHIC PlATING SySTeM GRAPHIC CASe AND MODUleS
Graphic Case and Modules
60.511.001 Graphic Case (with lid)60.511.002 Graphic Case lid60.511.003 Mandible Generic Module (with lid)60.511.004 Mandible Module lid60.511.005 Sagittal Split Plate Insert60.511.006 Screw, Drill Bit, Blade Insert
with recessed holes60.511.008 Maxillary Generic Module (with lid)60.511.009 Maxillary Module lid60.511.010 Chin Plate Insert60.511.011 Pre-bent Plate Insert60.511.012 90° and Oblique l-Plate Insert60.511.013 Anatomic l and Adaption Plate Insert60.611.014 Instrument Tray60.511.015 Trocar Instrument Insert
MatrixORTHOGNATHIC PlATING SySTeM GRAPHIC CASe AND MODUleS
Maxillary Module Assembly Mandible Module Assembly
60.511.008, 60.511.006, 60.511.011, 60.511.012 (stackable), 60.511.013 (stackable)
60.511.003, 60.511.006, 60.511.005, 60.511.010
ReFeReNCe CHART
60.511.014, 60.511.015
MatrixORTHOGNATHIC™ PlATING SySTeM Specialized implants and instruments for orthognathic surgery.
Synthes CMF1302 Wrights lane eastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322
www.depuysynthes.com
© DePuy Synthes CMF, a division of DOI 2013. All rights reserved.J9488-C 11/13 DV
Limited Warranty and Disclaimer: DePuy Synthes CMF products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fi tness, are hereby disclaimed.
WARNING: In the USA, this product has labeling limitations. See package insert for complete information.
CAUTION: USA Law restricts these devices to sale by or on the order of a physician.
Not all products are currently available in all markets.
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario l5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
MatrixORTHOGNATHIC PlATING SySTeM GRAPHIC CASe AND MODUleS
Graphic Case and Modules
60.511.001 Graphic Case (with lid)60.511.002 Graphic Case lid60.511.003 Mandible Generic Module (with lid)60.511.004 Mandible Module lid60.511.005 Sagittal Split Plate Insert60.511.006 Screw, Drill Bit, Blade Insert
with recessed holes60.511.008 Maxillary Generic Module (with lid)60.511.009 Maxillary Module lid60.511.010 Chin Plate Insert60.511.011 Pre-bent Plate Insert60.511.012 90° and Oblique l-Plate Insert60.511.013 Anatomic l and Adaption Plate Insert60.611.014 Instrument Tray60.511.015 Trocar Instrument Insert
MatrixORTHOGNATHIC PlATING SySTeM GRAPHIC CASe AND MODUleS
Maxillary Module Assembly Mandible Module Assembly
60.511.008, 60.511.006, 60.511.011, 60.511.012 (stackable), 60.511.013 (stackable)
60.511.003, 60.511.006, 60.511.005, 60.511.010
ReFeReNCe CHART