grade intersection 2011.4.14

37
Grade Intersection 2011.4.14 2011.5.2 6 Design of traffic engineering and safety facility

Upload: conan-ortiz

Post on 03-Jan-2016

49 views

Category:

Documents


0 download

DESCRIPTION

Grade Intersection 2011.4.14. Design of traffic engineering and safety facility. 2011.5.26. Contents. Traffic sign Road surface marking Dividing and protection facility. Traffic signs. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: Grade Intersection 2011.4.14

Grade Intersection2011.4.14

2011.5.26

Design of traffic engineering and safety facility

Page 2: Grade Intersection 2011.4.14

Contents• Traffic sign• Road surface marking• Dividing and protection facility

Page 3: Grade Intersection 2011.4.14

Traffic signs• Traffic signs or road signs are signs erected at the

side of roads to provide information to road users. With traffic volumes increasing over the last eight decades, many countries have adopted pictorial signs or otherwise simplified and standardized their signs to facilitate international travel where language differences would create barriers, and in general to help enhance traffic safety.

Page 4: Grade Intersection 2011.4.14

Categories• Traffic signs can be grouped into several types. For exa

mple, Annexe 1 of the Vienna Convention on Road Signs and Signals (1968), which at 30 June 2004 had 52 signatory countries, defines eight categories of signs:

A. Danger warning signs

B. Priority signs

C. Prohibitory or restrictive signs

D. Mandatory signs

E. Special regulation signs

F. Information, facilities, or service signs

G. Direction, position, or indication signs

H. Additional panels

Page 5: Grade Intersection 2011.4.14

History• The earliest road signs were

milestones, giving distance or direction; for example, the Romans erected stone columns throughout their empire giving the distance to Rome.

• The first modern road signs erected on a wide scale were designed for riders of bicycles in the late 1870s and early 1880s.

Page 6: Grade Intersection 2011.4.14

History• One of the first modern-day road sign systems was devised by the

Italian Touring Club in 1895. • By 1900, a Congress of the International League of Touring

Organizations in Paris was considering proposals for standardization of road signage.

• In 1903 the British government introduced four 'national' signs based on shape, but the basic patterns of most traffic signs were set at the 1908 in Rome.

• The intensive work on international road signs that took place between 1926 and 1949 eventually led to the development of the European road sign system.

• The UK adopted a version of the European road signs in 1964 and, over past decades, North American signage began using some symbols and graphics mixed in with English.

Page 7: Grade Intersection 2011.4.14

History• New generations of traffic signs based on electronic displ

ays can also change their text (or, in some countries, symbols) to provide for "intelligent control" linked to automated traffic sensors or remote manual input.

• In over 20 countries, real-time Traffic Message Channel incident warnings are conveyed directly to vehicle navigation systems using inaudible signals carried via FM radio, 3G cellular data and satellite broadcasts.

• Finally, cars can pay tolls and trucks pass safety screening checks using video number plate scanning, or RFID transponders in windshields linked to antennae over the road, in support on-board signalling, toll collection and travel time monitoring.

Page 8: Grade Intersection 2011.4.14

Road surface marking• Road surface marking is any kind of device or material

that is used on a road surface in order to convey official information. They can also be applied in other facilities used by vehicles to mark parking spaces or designate areas for other uses.

• Road surface markings are used on paved roadways to provide guidance and information to drivers and pedestrians. Uniformity of the markings is an important factor in minimizing confusion and uncertainty about their meaning, and efforts exist to standardise such markings across borders. However, countries and areas categorize and specify road surface markings in different ways.

Page 9: Grade Intersection 2011.4.14

History• In the United States, two states claim to be the first to have developed cente

r lines.• According to the state of Michigan, painted white center lines were develop

ed by Edward N. Hines, the chairman of the Wayne County, Michigan, Board of Roads in 1911.

• The first highway centerline was painted along M-15 (later a section of US Highway 41 or M-28) in 1917, by Kenneth Ingalls Sawyer. According to the state of California, Dr. June McCarroll was the first to develop center lines, in 1917.

• In 2002, a portion of Interstate 10 was designated and signed as "The Doctor June McCarroll Memorial Freeway" in her honor.

• White center lines were used in the United States until the 1971 edition of the Manual on Uniform Traffic Control Devices, which mandated yellow as the standard color of center lines nationwide (after several decades of debate on the issue and some states already offering the double and single solid yellow center line).

• Yellow was adopted because it was already the standard color of warning signs, and because it was easy to teach drivers to associate yellow lines with dividing opposing traffic and white lines with dividing traffic in the same direction.

Page 10: Grade Intersection 2011.4.14

Categories• Mechanical markers Mechanical devices may be raised or

recessed into the road surface, and either reflective or non-reflective. Most are permanent; some are movable.

Cat's eye (road)

Botts' dots

Rumble strips

Reflective markers

Page 11: Grade Intersection 2011.4.14

Categories• Non-mechanical markers Paint Paint, sometimes with additives such as reflective glass beads, is generally use

d to mark travel lanes. It is also used to mark spaces in parking lots or special purpose spaces for handicap parking, loading zones, or time restricted parking areas. Colors for these applications vary by locality. Paint is a low-cost marking and has been in widespread use since approximately the early 1950s.

Thermoplastic Thermoplastic coatings are generally homogeneous dry mixes of binder resins,

plasticizers, glass beads (or other optics), pigments, and fillers. Plastic Plastics were introduced in the late 1960s and early 1970s. Commonly referre

d to as tape or cold plastic, this product is heavy-grade material with reflective beads embedded in the plastic. It is commonly used to mark crosswalks, stop bars, and traffic guidances such as turn lanes, HOV lanes, train crossings, pedestrian crossings, , bus lanes, and bike lanes.

Epoxy: Epoxy has been in use since the late 1970s and has gained popularity over th

e 1990s as the technology has become more affordable and reliable. This material competes directly with plastic with respect to usage and cost.

Page 12: Grade Intersection 2011.4.14

Dividing and protection facility• Traffic barriers keep vehicles within their roadway and prevent

vehicles from colliding with dangerous obstacles. Traffic barriers installed at the road side also prevent errant vehicles from traversing steep slopes. Traffic barriers installed at the medians of divided highways are also referred to as median barriers. The latter also prevent errant vehicles from entering the opposing carriageway of traffic and help to prevent head-on collisions.

Components of a standard guardrail: S – guardrail, D – distance piece/spacer, P – sigma post

42 inches (110 cm)-high version of the Jersey barrier for deflecting automobiles and semi-trailer trucks

Page 13: Grade Intersection 2011.4.14

Other facilities• Anti-dazzle panel • Reflective road stud

Page 14: Grade Intersection 2011.4.14

道路交通事故

2001 2002 2003 2004 2005 2006 2007 2008 2009

民用汽车总量 ( 万辆 )

1802 2053 2383 2742 3160 4895 5697 6467 7802

死亡人数 ( 万 ) 10.6 10.9 10.4 9.4 9.9 8.9 8.2 7.3 6.8

2009 年,中国汽车保有量约占世界汽车保有量的百分之三,但交通事故死亡人数却占世界的百分之十六。

道路交通死亡人数已经连续十余年居世界第一

Page 15: Grade Intersection 2011.4.14

道路交通安全标志1. 警告标志2. 禁令标志3. 指示标志4. 指路标志5. 旅游区标志6. 道路施工安全标志7. 辅助标志

Page 16: Grade Intersection 2011.4.14

道路交通安全标志• 交通警告标志:警告标志是交通标志中主要标志的一种 , 用以警告驾

驶员注意前方路段存在危险和必须采取的措施。( 49 种)

Page 17: Grade Intersection 2011.4.14

道路交通安全标志• 禁令标志:禁止或限制车辆、行人交通通行的标志( 42 种)

Page 18: Grade Intersection 2011.4.14

道路交通安全标志• 指示标志:指示车辆、行人进行的标志( 2

9 )

Page 19: Grade Intersection 2011.4.14

道路交通安全标志• 指路标志:传递道路方向、距离• 一般指路标志( 62 ):

•高速公路指路标志

Page 20: Grade Intersection 2011.4.14

道路交通安全标志• 旅游区标志( 17 )

Page 21: Grade Intersection 2011.4.14

道路交通安全标志道路施工安全标志 ( 26 )

Page 22: Grade Intersection 2011.4.14

道路交通安全标志• 辅助标志

Page 23: Grade Intersection 2011.4.14

道路标线• 禁止标线• 指示标线• 警告标线

Page 24: Grade Intersection 2011.4.14

道路标线• 禁止标线

Page 25: Grade Intersection 2011.4.14

道路标线

Page 26: Grade Intersection 2011.4.14

道路标线• 指示标线

Page 27: Grade Intersection 2011.4.14

道路标线• 指示标线

Page 28: Grade Intersection 2011.4.14

道路标线• 警告标线

Page 29: Grade Intersection 2011.4.14

隔离和防护设施• 城市道路 - 安全防护设施主要内容包括中央分隔带防撞护栏、防眩板、波形梁护栏、中央分隔带开

口处活动护栏、跨线桥防护网、隔离栅、交通护栏、轮廓标等。

波形梁钢护栏因其柔性好,车辆与其相撞时,对车辆起导向作用,不至于发生严重碰撞后果,使用效果优于水泥混凝土护栏。

Page 30: Grade Intersection 2011.4.14

隔离和防护设施• 钢筋混凝土中央防撞护栏结构设计图

Page 31: Grade Intersection 2011.4.14

等级与设计要求• 交通工程与安全设施等级及适用范围

• 交通工程与安全设施包括交通安全设施和管理设施两部分,各项设施应统筹规划、总体设计,并结合城镇路网的建设情况等逐步补充、完善。

Page 32: Grade Intersection 2011.4.14

交通安全设施设计要求

Page 33: Grade Intersection 2011.4.14

交通安全设施设计要求

Page 34: Grade Intersection 2011.4.14

交通安全设施设计要求

Page 35: Grade Intersection 2011.4.14

管理设施设计要求

Page 36: Grade Intersection 2011.4.14

团结东大街

邢台东方医院

天龙汽修厂

公交站

公交站

天水汽修吊车修理

5050

ÍŽ

áó½

ÖTUANJIE St

ÐÏÖ

ݱ±Â

·

±±N

ÍŽ

áó½

ÖTUANJIE St

黀

Ïó½

ÖQUANNAN St

Ð ÏÖݱ±Â ·XINGZHOU Rd

Í Å½á¶ « ó½Ö

Î ÷W

Ð ÏÖݱ±Â ·XINGZHOU Rd

Ë ³µ ÂÂ ·SHUNDE Rd

ÐÏÖݱ±Â·XINGZHOU Rd

ÍŽᶫó½Ö

¶«E

ÐÏÖݱ±Â·XINGZHOU Rd

XIANGDU RdÏ嶼·

说明: 护栏。 图中标注的单位为米。

50 50

单杆双面

单杆双面

单杆

双面

单杆

双面

ÐÏÖ

ݱ±Â

·

XING

ZHOU

Rd

ÖÐÐ

˶«

ó½Ö

쌦

¼Â·

XIAN

GDU

Rd

ÍŽ

ᶫ

ó½Ö

TUAN

JIED

ONG

St

ÐÏÖ

ݱ±Â

·

ÄÏ S

ÖÐÐ

˶«

ó½Ö

ZHON

GXIN

GDON

G St ÍŽ

ᶫ

ó½Ö

TUAN

JIED

ONG

St

1 1000比例: :

N

Page 37: Grade Intersection 2011.4.14