63

Our Narrow Width (left) and MPWidth (right) cabinets give you achoice of pedestal options for yourworkbench system.

Partial- or full-height doors can beadded to cabinet housings to providebulk shelf storage with full security.

The ability to add casters to legs andcabinets means that any Lista work-bench can become a workstation onwheels.

Rugged stationary and adjustableriser shelves provide above-work-surface storage for items that requireeasy, ready access.

Instrument riser shelves can beequipped with electrical kits for easyaccess to power.

The FlexWorks® Accessory Systemprovides for a wide variety of storage and work accessories abovethe worksurface.

Our variety of workbench tops, from hard maple to plastic laminateto galvanized steel, are all easy tomaintain, rugged and durable.

Our variety of workbench legs andbases, from industrial to technical toHeight-Right® height-adjustable, aredesigned to meet your specific func-tional and aesthetic requirements.

Lista WorkbenchesLista workbench systems, like

all Lista systems, feature a clean,

aesthetically pleasing and

extremely practical design.

These are fully integrated mod-

ular systems for storage and work-

space. They are customizable to

the last detail, but come without a

custom cost. Workbenches can be

configured in a variety of heights

and lengths. Benches can be

ordered at ergonomically correct

standard work height, or at desk

or counter heights. This means that

stored tools and parts are always

within easy reach.

Lista offers workbench compo-

nents for industrial, assembly and

technical/laboratory settings,

allowing the exact customization

needed for each application.

Our workbenches can be

teamed with both Narrow Width

(16 7⁄8" wide) and MP Width

(22 3 ⁄16" wide) storage cabinets

for use as pedestals. This provides

complete organization of tools,

components or instrumentation,

right at the point of use.

Building your Ideal Workbench

Lista’s wide array of accessory

options, above and below the

worksurface, allows for an almost

infinite number of configurations.

Using standard components, your

workbench system can be com-

pletely customized, without the

custom cost, to suit your current

and changing needs.

62

63

Our Narrow Width (left) and MPWidth (right) cabinets give you achoice of pedestal options for yourworkbench system.

Partial- or full-height doors can beadded to cabinet housings to providebulk shelf storage with full security.

The ability to add casters to legs andcabinets means that any Lista work-bench can become a workstation onwheels.

Rugged stationary and adjustableriser shelves provide above-work-surface storage for items that requireeasy, ready access.

Instrument riser shelves can beequipped with electrical kits for easyaccess to power.

The FlexWorks® Accessory Systemprovides for a wide variety of storage and work accessories abovethe worksurface.

Our variety of workbench tops, from hard maple to plastic laminateto galvanized steel, are all easy tomaintain, rugged and durable.

Our variety of workbench legs andbases, from industrial to technical toHeight-Right® height-adjustable, aredesigned to meet your specific func-tional and aesthetic requirements.

Lista WorkbenchesLista workbench systems, like

all Lista systems, feature a clean,

aesthetically pleasing and

extremely practical design.

These are fully integrated mod-

ular systems for storage and work-

space. They are customizable to

the last detail, but come without a

custom cost. Workbenches can be

configured in a variety of heights

and lengths. Benches can be

ordered at ergonomically correct

standard work height, or at desk

or counter heights. This means that

stored tools and parts are always

within easy reach.

Lista offers workbench compo-

nents for industrial, assembly and

technical/laboratory settings,

allowing the exact customization

needed for each application.

Our workbenches can be

teamed with both Narrow Width

(16 7⁄8" wide) and MP Width

(22 3 ⁄16" wide) storage cabinets

for use as pedestals. This provides

complete organization of tools,

components or instrumentation,

right at the point of use.

Building your Ideal Workbench

Lista’s wide array of accessory

options, above and below the

worksurface, allows for an almost

infinite number of configurations.

Using standard components, your

workbench system can be com-

pletely customized, without the

custom cost, to suit your current

and changing needs.

62

64

Lista Industrial Workbench Features

Rugged. Durable. Built to handle

the harshest work environments

— Lista’s industrial workbenches

feature flexible standard compo-

nents and can be cost-effectively

custom designed and built to meet

the specific needs of your

application.

Feature: Wide choice of benchtop accessoriesCreate task-specific configurations.

Benefit: Greater productivity and efficiency

Feature: Variety of worksurfacesAll tops come in a variety of lengths and are durable and long-lasting.

Benefit: Surface always appropriate to application

Feature: Ergonomic handlesWhen drawers are closed, handles are flush with housing so nothing protrudes.

Drawer handles are located at top of drawer.Benefit: Improves safety, appearance and ergonomics

Feature: Customizable drawer compartmentsA wide variety of drawer accessories for maximum partitioning flexibility.

Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and stylesDifferent widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets.

Benefit: Customized to your needs

Feature: Heavy-duty welded legOne-piece leg with bottom hole for optional leveling glides.

Benefit: Provides support for heavy-duty applications

Feature: MobilityAll cabinets and legs are easily

updated for mobile uses.Benefit: Work areas can easily bereconfigured, components can be

moved to and from the work site

65

64

Lista Industrial Workbench Features

Rugged. Durable. Built to handle

the harshest work environments

— Lista’s industrial workbenches

feature flexible standard compo-

nents and can be cost-effectively

custom designed and built to meet

the specific needs of your

application.

Feature: Wide choice of benchtop accessoriesCreate task-specific configurations.

Benefit: Greater productivity and efficiency

Feature: Variety of worksurfacesAll tops come in a variety of lengths and are durable and long-lasting.

Benefit: Surface always appropriate to application

Feature: Ergonomic handlesWhen drawers are closed, handles are flush with housing so nothing protrudes.

Drawer handles are located at top of drawer.Benefit: Improves safety, appearance and ergonomics

Feature: Customizable drawer compartmentsA wide variety of drawer accessories for maximum partitioning flexibility.

Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and stylesDifferent widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets.

Benefit: Customized to your needs

Feature: Heavy-duty welded legOne-piece leg with bottom hole for optional leveling glides.

Benefit: Provides support for heavy-duty applications

Feature: MobilityAll cabinets and legs are easily

updated for mobile uses.Benefit: Work areas can easily bereconfigured, components can be

moved to and from the work site

65

67

Heavy-duty Lista industrial work-benches in combination with Listastacked cabinets help to create anorganized, efficient workspace thatstands up to the challenges of thismarine emergency response company.

Workbenches at Sun Chemical’s labo-ratories are used for the formulationand matching of printer’s inks. Thebenches provide an aestheticallypleasing work area with durable,easy-to-clean surfaces and organizedstorage.

Cliflex Bellows, a manufacturer ofindustrial control equipment, relies onLista workbenches for heavy dutystorage below the bench, as well asdurable worksurfaces providingdecades of use.

66

Lista Industrial Workbenches Make Any Workspace Work

Lista’s rugged industrial workbench

systems and the large variety of

accessories can be configured to

suit almost any application or

working environment.

Four sets of four custom-designedworkbenches make maximum use ofthe available space in this machinetool room at the Mercedes-BenzTraining Center.

This corporate aircraft operatorwanted to upgrade its maintenancefacility to match the quality of its aircraft. They use several mobile“benches on wheels” in its hangarand support shop, including thismobile inspection station.

In this automotive engineering shopused by the PacWest Racing Group,Lista workbenches and overheadcabinets help to keep the team ofracing engineers operating at peakefficiency.

67

Heavy-duty Lista industrial work-benches in combination with Listastacked cabinets help to create anorganized, efficient workspace thatstands up to the challenges of thismarine emergency response company.

Workbenches at Sun Chemical’s labo-ratories are used for the formulationand matching of printer’s inks. Thebenches provide an aestheticallypleasing work area with durable,easy-to-clean surfaces and organizedstorage.

Cliflex Bellows, a manufacturer ofindustrial control equipment, relies onLista workbenches for heavy dutystorage below the bench, as well asdurable worksurfaces providingdecades of use.

66

Lista Industrial Workbenches Make Any Workspace Work

Lista’s rugged industrial workbench

systems and the large variety of

accessories can be configured to

suit almost any application or

working environment.

Four sets of four custom-designedworkbenches make maximum use ofthe available space in this machinetool room at the Mercedes-BenzTraining Center.

This corporate aircraft operatorwanted to upgrade its maintenancefacility to match the quality of its aircraft. They use several mobile“benches on wheels” in its hangarand support shop, including thismobile inspection station.

In this automotive engineering shopused by the PacWest Racing Group,Lista workbenches and overheadcabinets help to keep the team ofracing engineers operating at peakefficiency.

6968

Lista Technical Workbench Features

Feature: Wide choice of benchtop accessoriesCreate task-specific configurations.

Benefit: Greater productivity and efficiency

Feature: Built-in electrical power supplyMultiple outlets conveniently located on instrument riser.

Benefit: Easy access to electricity

Feature: Variety of worksurfaces, including ESDAll tops come in a variety of lengths and are durable and long-lasting.

Benefit: Surface always appropriate to application, ESD surface protects sensitive components

Feature: Ergonomic handlesWhen drawers are closed, handles are flush with housing so nothing protrudes.

Drawer handles are located at top of drawer.Benefit: Improves safety, appearance and ergonomics

Feature: ESD drawer accessories, grounding wireStatic dissipative paint and plastic boxes protect sensitive drawer contents.

Benefit: Safe storage and use of electronic items

Feature: Customizable drawer compartmentsA wide variety of drawer accessories for maximum partitioning flexibility.

Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and stylesDifferent widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets.

Benefit: Customized to your needs

Feature: Removable leg panelAllows for two-tone colors, hides stringer and bottom shelf hardware,

provides access to electric cables.Benefit: Enhanced aesthetics, easy maintenance

Feature: Easy-access leveling adjustmentsRemovable end caps provide clean look and quick access to

leveling adjustments.Benefit: Worksurface is always level

Feature: MobilityAll cabinets and legs are easily updated

for mobile uses.Benefit: Work areas can easily bereconfigured, components can be

moved to and from the work site

Featuring a sleek, aesthetically

pleasing design, the real beauty of

Lista’s technical workbenches is

their ability to perfectly suit the

widest variety of applications.

Our modular approach is the key to

our technical benches’ versatility,

with flexible standard components

and accessory options both above

and below the worksurface.

ES

D AVAILABLE

6968

Lista Technical Workbench Features

Feature: Wide choice of benchtop accessoriesCreate task-specific configurations.

Benefit: Greater productivity and efficiency

Feature: Built-in electrical power supplyMultiple outlets conveniently located on instrument riser.

Benefit: Easy access to electricity

Feature: Variety of worksurfaces, including ESDAll tops come in a variety of lengths and are durable and long-lasting.

Benefit: Surface always appropriate to application, ESD surface protects sensitive components

Feature: Ergonomic handlesWhen drawers are closed, handles are flush with housing so nothing protrudes.

Drawer handles are located at top of drawer.Benefit: Improves safety, appearance and ergonomics

Feature: ESD drawer accessories, grounding wireStatic dissipative paint and plastic boxes protect sensitive drawer contents.

Benefit: Safe storage and use of electronic items

Feature: Customizable drawer compartmentsA wide variety of drawer accessories for maximum partitioning flexibility.

Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and stylesDifferent widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets.

Benefit: Customized to your needs

Feature: Removable leg panelAllows for two-tone colors, hides stringer and bottom shelf hardware,

provides access to electric cables.Benefit: Enhanced aesthetics, easy maintenance

Feature: Easy-access leveling adjustmentsRemovable end caps provide clean look and quick access to

leveling adjustments.Benefit: Worksurface is always level

Feature: MobilityAll cabinets and legs are easily updated

for mobile uses.Benefit: Work areas can easily bereconfigured, components can be

moved to and from the work site

Featuring a sleek, aesthetically

pleasing design, the real beauty of

Lista’s technical workbenches is

their ability to perfectly suit the

widest variety of applications.

Our modular approach is the key to

our technical benches’ versatility,

with flexible standard components

and accessory options both above

and below the worksurface.

ES

D AVAILABLE

71

The Sony Electronics facility needed a more flexible work-bench system that would be strong enough for workingwith and storing heavy electronic equipment. Lista’sworkbenches, featuring the FlexWorks® AccessorySystem, have proven an ideal solution, serving a varietyof functions and offering the necessary weight-bearingcapacity. Sony also chose Lista mobile cabinets, which areused for housing a range of parts and tools.

At Columbia University’s MedicalResearch Laboratories, Lista work-bench systems offer maximumdrawer storage and organization.They allow researchers to keep alltools, supplies and testing equipmentfrom cluttering the worksurface. Theclean, high tech look of the systems isa perfect complement to the labora-tory’s sleek interior design.

Telesis Marking Systems utilizes Listaworkbenches throughout their assem-bly area, with specific benchesdesigned for particular tasks. Lista’scabinets with subdividable drawersare ideal for storing small items andtools such as fasteners and assemblyparts.

70

Lista Technical Workbenches Make Any Workspace Work

No matter what you’re working

on, Lista’s technical workbench

systems have the variety, dura-

bility and flexibility to meet

your needs.

Cummins Engine purchased 200 Lista workbenches featuring the FlexWorks® Accessory System,largely because they could customizeeach workbench to suit the needs ofeach individual technician. The Listasystem also provides Cummins with a variety of storage solutions belowthe worksurface.

Productivity has improved atHypertherm, a manufacturer ofplasma cutting equipment, with theassistance of Lista workbenchesequipped with the FlexWorksAccessory System. Hand, electric andpneumatic tools are stored directly atthe workstations, and FlexWorkscomponents are easily adjustedwhenever necessary to suit specifictasks.

With Lista workbenches and overhead cabinets, WishardMemorial Hospital was able to consolidate their BiomedicalEngineering Department into a very organized and produc-tive workspace, using dramatically less square footagethan prior equipment. Lista’s modular cabinet drawers also simplify the inventory of supplies and components.

71

The Sony Electronics facility needed a more flexible work-bench system that would be strong enough for workingwith and storing heavy electronic equipment. Lista’sworkbenches, featuring the FlexWorks® AccessorySystem, have proven an ideal solution, serving a varietyof functions and offering the necessary weight-bearingcapacity. Sony also chose Lista mobile cabinets, which areused for housing a range of parts and tools.

At Columbia University’s MedicalResearch Laboratories, Lista work-bench systems offer maximumdrawer storage and organization.They allow researchers to keep alltools, supplies and testing equipmentfrom cluttering the worksurface. Theclean, high tech look of the systems isa perfect complement to the labora-tory’s sleek interior design.

Telesis Marking Systems utilizes Listaworkbenches throughout their assem-bly area, with specific benchesdesigned for particular tasks. Lista’scabinets with subdividable drawersare ideal for storing small items andtools such as fasteners and assemblyparts.

70

Lista Technical Workbenches Make Any Workspace Work

No matter what you’re working

on, Lista’s technical workbench

systems have the variety, dura-

bility and flexibility to meet

your needs.

Cummins Engine purchased 200 Lista workbenches featuring the FlexWorks® Accessory System,largely because they could customizeeach workbench to suit the needs ofeach individual technician. The Listasystem also provides Cummins with a variety of storage solutions belowthe worksurface.

Productivity has improved atHypertherm, a manufacturer ofplasma cutting equipment, with theassistance of Lista workbenchesequipped with the FlexWorksAccessory System. Hand, electric andpneumatic tools are stored directly atthe workstations, and FlexWorkscomponents are easily adjustedwhenever necessary to suit specifictasks.

With Lista workbenches and overhead cabinets, WishardMemorial Hospital was able to consolidate their BiomedicalEngineering Department into a very organized and produc-tive workspace, using dramatically less square footagethan prior equipment. Lista’s modular cabinet drawers also simplify the inventory of supplies and components.

73

Lista TopsThis warp-free and oil resistant 1 3 ⁄4" thicktop has a wood core and a 3 ⁄8" thick sandedpressed wood finish, top and bottom.

PART NO. SIZELTOP-48 48" long x 30" deepLTOP-60 60" long x 30" deep LTOP-72 72" long x 30" deep LTOP-84 84" long x 30" deep LTOP-96 96" long x 30" deep LTOP-4836 48" long x 36" deep LTOP-6036 60" long x 36" deep LTOP-7236 72" long x 36" deep LTOP-8436 84" long x 36" deep LTOP-9636 96" long x 36" deep

Galvanized Steel Over WoodTopsSame construction as the standard Lista Topwith an additional heavy gauge, galvanizedsteel cover that is fitted over top and sides ofwood core. Top is 1 3 ⁄4" thick.

PART NO. SIZELSTOP-48 48" long x 30" deep LSTOP-60 60" long x 30" deep LSTOP-72 72" long x 30" deep LSTOP-84 84" long x 30" deep LSTOP-96 96" long x 30" deep LSTOP-4836 48" long x 36" deep LSTOP-6036 60" long x 36" deep LSTOP-7236 72" long x 36" deep LSTOP-8436 84" long x 36" deep LSTOP-9636 96" long x 36" deep

Phenolic TopsFeatures a high-pressure laminate designed forlaboratory worksurfaces. Resistant to chemi-cals, stains or discoloration. Top is 1" thickphenolic resin, available in black.

PART NO. SIZERTOP-48 48" long x 30" deep RTOP-60 60" long x 30" deep RTOP-72 72" long x 30" deep RTOP-84 84" long x 30" deep RTOP-96 96" long x 30" deep

Maple TopsSatin finish 1 3 ⁄4" thick hard maple. Availablein standard square edge (shown above) orradius/bullnose front edge. To order aradius/bullnose edge, add “-BN” to the end of the part number.

PART NO. SIZEMTOP-48 48" long x 30" deep MTOP-60 60" long x 30" deep MTOP-72 72" long x 30" deep MTOP-84 84" long x 30" deep MTOP-96 96" long x 30" deep MTOP-4836 48" long x 36" deep MTOP-6036 60" long x 36" deep MTOP-7236 72" long x 36" deep MTOP-8436 84" long x 36" deep MTOP-9636 96" long x 36" deep

Plastic Laminate TopsWoodcore center with plastic laminated topand sides. 1 9 ⁄16" thick. Dove gray is standardbut other colors are available on request. Avail-able in standard square edge or radius/bullnosefront edge (shown above). To order aradius/bullnose edge, add “-BN” to the end of the part number.

PART NO. SIZEPTOP-48 48" long x 30" deep PTOP-60 60" long x 30" deep PTOP-72 72" long x 30" deep PTOP-84 84" long x 30" deep PTOP-96 96" long x 30" deep PTOP-4836 48" long x 36" deep PTOP-6036 60" long x 36" deep PTOP-7236 72" long x 36" deep PTOP-8436 84" long x 36" deep PTOP-9636 96" long x 36" deep

Lista workbench tops are all

easy to maintain, rugged, and

durable.

Tops come in 48", 60", 72", 84"

and 96" lengths, and are 30" or

36" deep. Other sizes are available

special order, and certain tops are

available with a radius/bullnose

front edge.

Static Dissipative PlasticLaminate TopsWoodcore center with plastic laminated topand sides. 1 9 ⁄16" thick. Grounding bolt and a12' grounding cord with a 1 megohm resistorare included. Standard color is white but othercolors are available on request. Available instandard square edge or radius/bullnose frontedge (shown above). To order a radius/bullnose edge, add “-BN” to the endof the part number.

SpecificationsSurface resistivity: 108-109 ohms, 100 voltsResistance to ground: 106-10 7 typical, 1 x 10 8-1 x

10 9 certified.Static Decay Rate: 5,000 to 0 volts, Fed test

method 101C, Method 4048; 0.01 sec. typical; less than 0.05 sec. certified.

Certification: EOS/ESD Association standard numbers4.1-1990 Work Surfaces ResistiveCharacterization.

PART NO. SIZESDTOP-48 48" long x 30" deep SDTOP-60 60" long x 30" deep SDTOP-72 72" long x 30" deep SDTOP-84 84" long x 30" deep SDTOP-96 96" long x 30" deep SDTOP-4836 48" long x 36" deep SDTOP-6036 60" long x 36" deep SDTOP-7236 72" long x 36" deep SDTOP-8436 84" long x 36" deep SDTOP-9636 96" long x 36" deep

Stainless Steel Over Wood TopsTop is constructed of durable, heavy gaugestainless steel, fitted over top and sides ofwood core. Top is 1 3 ⁄4" thick.

PART NO. SIZELSSTOP-4830 48" long x 30" deep LSSTOP-6030 60" long x 30" deep LSSTOP-7230 72" long x 30" deep LSSTOP-8430 84" long x 30" deep LSSTOP-9630 96" long x 30" deep LSSTOP-4836 48" long x 36" deep LSSTOP-6036 60" long x 36" deep LSSTOP-7236 72" long x 36" deep LSSTOP-8436 84" long x 36" deep LSSTOP-9636 96" long x 36" deep

72

How to Order Custom Workbenches from Lista

1 Select Workbench TopSelect the top that best suits your needs fromthe choices on page 73. Choose the toplength, depth and style that you prefer.

2 Select Below-Worksurface Accessories

Select either a 2 leg, a 1 leg with cabinet or a2 cabinet configuration. Legs, stringers, bottomshelves and privacy panels are shown on pages74 -75. Hanging cabinets are shown on page81. If you have selected a cabinet(s) pedestal,please see pages 42-43 for cabinet orderinginstructions, or choose an Easy-Order cabinetfrom the appropriate pages.

Sample Workbench Order

QUANTITY PART NO. DESCRIPTION

1 MTOP-60 maple workbench top 1

1 NTL33.5x28.5 technical leg 2

1 ST-60NTLMP stringer2

1 MP600-3A-I Easy-Order cabinet 2

Housing: BB bright blue paint 4

Drawers: BB bright blue paint 4

1 TBS60 backstop 3

1 IRSS20 instru. riser support 3

1 IRSS20/15 instru. riser support 3

1 MS6012 instru. riser shelf 3

1 TBS60 shelf backstop 3

BB bright blue paint 4

These are the basic steps

required for ordering custom work-

benches from Lista.

To order an Easy-Order combi-

nation (workbench with preconfig-

ured accessories) see pages 80-81

for industrial workbenches and

pages 82-83 for technical

workbenches.

■■■■■

3 Select Above-Worksurface Accessories

Select the backstop and endstops (page 78),shelves (stationary, adjustable or instrumentriser — see pages 78 -79) and/or Flex-Works® components (pages 85 -89) that best suit your needs.

4 Select ColorsSelect a color from the color chart on the backcover. Cabinet housing and drawer fronts canbe different colors, but drawer interiors are always gray.

1

2

22

3

3

3

4

3

Workbench Tops

73

Lista TopsThis warp-free and oil resistant 1 3 ⁄4" thicktop has a wood core and a 3 ⁄8" thick sandedpressed wood finish, top and bottom.

PART NO. SIZELTOP-48 48" long x 30" deepLTOP-60 60" long x 30" deep LTOP-72 72" long x 30" deep LTOP-84 84" long x 30" deep LTOP-96 96" long x 30" deep LTOP-4836 48" long x 36" deep LTOP-6036 60" long x 36" deep LTOP-7236 72" long x 36" deep LTOP-8436 84" long x 36" deep LTOP-9636 96" long x 36" deep

Galvanized Steel Over WoodTopsSame construction as the standard Lista Topwith an additional heavy gauge, galvanizedsteel cover that is fitted over top and sides ofwood core. Top is 1 3 ⁄4" thick.

PART NO. SIZELSTOP-48 48" long x 30" deep LSTOP-60 60" long x 30" deep LSTOP-72 72" long x 30" deep LSTOP-84 84" long x 30" deep LSTOP-96 96" long x 30" deep LSTOP-4836 48" long x 36" deep LSTOP-6036 60" long x 36" deep LSTOP-7236 72" long x 36" deep LSTOP-8436 84" long x 36" deep LSTOP-9636 96" long x 36" deep

Phenolic TopsFeatures a high-pressure laminate designed forlaboratory worksurfaces. Resistant to chemi-cals, stains or discoloration. Top is 1" thickphenolic resin, available in black.

PART NO. SIZERTOP-48 48" long x 30" deep RTOP-60 60" long x 30" deep RTOP-72 72" long x 30" deep RTOP-84 84" long x 30" deep RTOP-96 96" long x 30" deep

Maple TopsSatin finish 1 3 ⁄4" thick hard maple. Availablein standard square edge (shown above) orradius/bullnose front edge. To order aradius/bullnose edge, add “-BN” to the end of the part number.

PART NO. SIZEMTOP-48 48" long x 30" deep MTOP-60 60" long x 30" deep MTOP-72 72" long x 30" deep MTOP-84 84" long x 30" deep MTOP-96 96" long x 30" deep MTOP-4836 48" long x 36" deep MTOP-6036 60" long x 36" deep MTOP-7236 72" long x 36" deep MTOP-8436 84" long x 36" deep MTOP-9636 96" long x 36" deep

Plastic Laminate TopsWoodcore center with plastic laminated topand sides. 1 9 ⁄16" thick. Dove gray is standardbut other colors are available on request. Avail-able in standard square edge or radius/bullnosefront edge (shown above). To order aradius/bullnose edge, add “-BN” to the end of the part number.

PART NO. SIZEPTOP-48 48" long x 30" deep PTOP-60 60" long x 30" deep PTOP-72 72" long x 30" deep PTOP-84 84" long x 30" deep PTOP-96 96" long x 30" deep PTOP-4836 48" long x 36" deep PTOP-6036 60" long x 36" deep PTOP-7236 72" long x 36" deep PTOP-8436 84" long x 36" deep PTOP-9636 96" long x 36" deep

Lista workbench tops are all

easy to maintain, rugged, and

durable.

Tops come in 48", 60", 72", 84"

and 96" lengths, and are 30" or

36" deep. Other sizes are available

special order, and certain tops are

available with a radius/bullnose

front edge.

Static Dissipative PlasticLaminate TopsWoodcore center with plastic laminated topand sides. 1 9 ⁄16" thick. Grounding bolt and a12' grounding cord with a 1 megohm resistorare included. Standard color is white but othercolors are available on request. Available instandard square edge or radius/bullnose frontedge (shown above). To order a radius/bullnose edge, add “-BN” to the endof the part number.

SpecificationsSurface resistivity: 108-109 ohms, 100 voltsResistance to ground: 106-10 7 typical, 1 x 10 8-1 x

10 9 certified.Static Decay Rate: 5,000 to 0 volts, Fed test

method 101C, Method 4048; 0.01 sec. typical; less than 0.05 sec. certified.

Certification: EOS/ESD Association standard numbers4.1-1990 Work Surfaces ResistiveCharacterization.

PART NO. SIZESDTOP-48 48" long x 30" deep SDTOP-60 60" long x 30" deep SDTOP-72 72" long x 30" deep SDTOP-84 84" long x 30" deep SDTOP-96 96" long x 30" deep SDTOP-4836 48" long x 36" deep SDTOP-6036 60" long x 36" deep SDTOP-7236 72" long x 36" deep SDTOP-8436 84" long x 36" deep SDTOP-9636 96" long x 36" deep

Stainless Steel Over Wood TopsTop is constructed of durable, heavy gaugestainless steel, fitted over top and sides ofwood core. Top is 1 3 ⁄4" thick.

PART NO. SIZELSSTOP-4830 48" long x 30" deep LSSTOP-6030 60" long x 30" deep LSSTOP-7230 72" long x 30" deep LSSTOP-8430 84" long x 30" deep LSSTOP-9630 96" long x 30" deep LSSTOP-4836 48" long x 36" deep LSSTOP-6036 60" long x 36" deep LSSTOP-7236 72" long x 36" deep LSSTOP-8436 84" long x 36" deep LSSTOP-9636 96" long x 36" deep

72

How to Order Custom Workbenches from Lista

1 Select Workbench TopSelect the top that best suits your needs fromthe choices on page 73. Choose the toplength, depth and style that you prefer.

2 Select Below-Worksurface Accessories

Select either a 2 leg, a 1 leg with cabinet or a2 cabinet configuration. Legs, stringers, bottomshelves and privacy panels are shown on pages74 -75. Hanging cabinets are shown on page81. If you have selected a cabinet(s) pedestal,please see pages 42-43 for cabinet orderinginstructions, or choose an Easy-Order cabinetfrom the appropriate pages.

Sample Workbench Order

QUANTITY PART NO. DESCRIPTION

1 MTOP-60 maple workbench top 1

1 NTL33.5x28.5 technical leg 2

1 ST-60NTLMP stringer2

1 MP600-3A-I Easy-Order cabinet 2

Housing: BB bright blue paint 4

Drawers: BB bright blue paint 4

1 TBS60 backstop 3

1 IRSS20 instru. riser support 3

1 IRSS20/15 instru. riser support 3

1 MS6012 instru. riser shelf 3

1 TBS60 shelf backstop 3

BB bright blue paint 4

These are the basic steps

required for ordering custom work-

benches from Lista.

To order an Easy-Order combi-

nation (workbench with preconfig-

ured accessories) see pages 80-81

for industrial workbenches and

pages 82-83 for technical

workbenches.

■■■■■

3 Select Above-Worksurface Accessories

Select the backstop and endstops (page 78),shelves (stationary, adjustable or instrumentriser — see pages 78 -79) and/or Flex-Works® components (pages 85 -89) that best suit your needs.

4 Select ColorsSelect a color from the color chart on the backcover. Cabinet housing and drawer fronts canbe different colors, but drawer interiors are always gray.

1

2

22

3

3

3

4

3

Workbench Tops

75

Stringers/Foot RestsHeavy gauge U channel with 2 mounting holeson each end plate.

PART NO. TOP LENGTHNST-48 ■ ■ 48"NST-60 ■ ■ 60"NST-72 ■ ■ 72"NST-84 ■ ■ 84"NST-96 ■ ■ 96"

Bottom ShelvesHeavy gauge steel shelf, for use as storage orfoot rest.

PART NO. TOP LENGTHNBS-48 ■ ■ 48"NBS-60 ■ ■ 60"NBS-72 ■ ■ 72"NBS-84 ■ ■ 84"NBS-96 ■ ■ 96"

Privacy PanelsSteel panel attaches to leg or cabinet and runsfull length of benchtop.

PART NO. TOP LENGTHNPP-48 ■ ■ 48"NPP-60 ■ ■ 60"NPP-72 ■ ■ 72"NPP-84 ■ ■ 84"NPP-96 ■ ■ 96"

Technical Bench LegsComes with glides for leveling on uneven sur-faces. Can be configured for right or left handinstallation. Assembly is required. Removableend caps allow access to glides. Removableside panel can be ordered in a different color.

PART NO. TOP DEPTH27 1⁄ 2" (700mm) HighNTL27.5x22.5 24" (610mm)NTL27.5x28.5 30" (762mm)29 1⁄ 2" (750mm) HighNTL29.5x22.5 24" (610mm)NTL29.5x28.5 30" (762mm)31 1⁄ 2" (800mm) HighNTL31.5x22.5 24" (610mm)NTL31.5x28.5 30" (762mm)33 1⁄ 2" (850mm) HighNTL33.5x22.5 24" (610mm)NTL33.5x28.5 30" (762mm)35 1⁄ 2" (900mm) HighNTL35.5x22.5 24" (610mm)NTL35.5x28.5 30" (762mm)39 1⁄ 2" (1000mm) HighNTL39.5x22.5 24" (610mm)NTL39.5x28.5 30" (762mm)

74

Workbench Below-Worksurface Accessories

Lista LegsEach welded one-piece leg assembly is 3 1⁄ 8"wide heavy gauge steel. Each foot has a bot-tom hole for leveling glide or anchor for floormounting. To order leveling glides, add“-G” to the end of the part number.

PART NO. TOP DEPTH27 1⁄ 2" (700mm) HighNLL27.5x22.5 24" (610mm)NLL27.5x28.5 30" (762mm)NLL27.5x34.5 36" (915mm)29 1⁄ 2" (750mm) HighNLL29.5x22.5 24" (610mm)NLL29.5x28.5 30" (762mm)NLL29.5x34.5 36" (915mm)31 1⁄ 2" (800mm) HighNLL31.5x22.5 24" (610mm)NLL31.5x28.5 30" (762mm)NLL31.5x34.5 36" (915mm)33 1⁄ 2" (850mm) HighNLL33.5x22.5 24" (610mm)NLL33.5x28.5 30" (762mm)NLL33.5x34.5 36" (915mm)39 1⁄ 2" (1000mm) HighNLL39.5x22.5 24" (610mm)NLL39.5x28.5 30" (762mm)NLL39.5x34.5 36" (915mm)

Lista Mobile LegsSame basic construc-tion as the standard legbut with 2 factorymounted 6" heavy dutycasters. Leg is availablewith rigid casters orswivel casters withlocks, indicated by“RB” or “SB” at theend of the part number.Requires stringer.

Rigid CastersPART NO. HEIGHT TOP DEPTHNM33.5X22.5RB 33 1⁄ 2" (850mm) 24" (610mm)NM33.5X28.5RB 33 1⁄ 2" (850mm) 30" (762mm)NM33.5X34.5RB 33 1⁄ 2" (850mm) 36" (915mm)NM35.5X22.5RB 35 1⁄ 2" (900mm) 24" (610mm)NM35.5X28.5RB 35 1⁄ 2" (900mm) 30" (762mm)NM35.5X34.5RB 35 1⁄ 2" (900mm) 36" (915mm)

Swivel CastersPART NO. HEIGHT TOP DEPTHNM33.5X22.5SB 33 1⁄ 2" (850mm) 24" (610mm)NM33.5X28.5SB 33 1⁄ 2" (850mm) 30" (762mm)NM33.5X34.5SB 33 1⁄ 2" (850mm) 36" (915mm)NM35.5X22.5SB 35 1⁄ 2" (900mm) 24" (610mm)NM35.5X28.5SB 35 1⁄ 2" (900mm) 30" (762mm)NM35.5X34.5SB 35 1⁄ 2" (900mm) 36" (915mm)

Lista PanelLegsSame basic construc-tion as the standardLista Leg with awelded panel on theoutside of the leg.For Lista Legs only.

PART NO. TOP DEPTH27 1⁄ 2" (700mm) HighNPL27.5x22.5 24" (610mm)NPL27.5x28.5 30" (762mm)NPL27.5x34.5 36" (915mm)29 1⁄ 2" (750mm) HighNPL29.5x22.5 24" (610mm)NPL29.5x28.5 30" (762mm)NPL29.5x34.5 36" (915mm)31 1⁄ 2" (800mm) HighNPL31.5x22.5 24" (610mm)NPL31.5x28.5 30" (762mm)NPL31.5x34.5 36" (915mm)33 1⁄ 2" (850mm) HighNPL33.5x22.5 24" (610mm)NPL33.5x28.5 30" (762mm)NPL33.5x34.5 36" (915mm)39 1⁄ 2" (1000mm) HighNPL39.5x22.5 24" (610mm)NPL39.5x28.5 30" (762mm)NPL39.5x34.5 36" (915mm)

The components on these two

pages are the options available for

supporting your workbench top.

Workbenches may also be sup-

ported by a pair of cabinets, or by

one cabinet plus one of the legs

shown on these pages.

All parts must be ordered

separately.

How to order workbench below-worksurface accessories1. Select benchtop length (see

page 73).2. Select base configuration, includ-

ing number of cabinets (if any),cabinet size (Narrow Width, MP Width) and number of legs (if any). Note: Sets of legs must beordered at matching heights.Individual legs must be ordered tomatch the overall height of thecabinet or cabinet plus base (seechart to right).

3. Select stringer, bottom shelf orprivacy panel part numbers tocorrespond to both length ofbenchtop and base configuration.

4. Specify color from the chart onthe back cover.

Technical Mobile LegsComes with 2 factory-mounted 31⁄ 2" x 11⁄ 4"casters. Leg is available with rigid casters orswivel casters with locks, indicated by “RB” or “SB” at the end of the part number. Astringer is required for 2- leg models.

PART NO. FOR USE WITHRigid CastersTM33.5X22.5RB 24" depth topTM33.5X28.5RB 30" depth topSwivel CastersTM33.5X22.5SB 24" depth topTM33.5X28.5SB 30" depth top

Bolting Adjustable Height LegsWorkbench height is adjusted by bolting framein place. Height adjusts in 2" increments.Range is 27 1⁄ 2" to 39 1⁄ 2". Workbench topand accessories must be ordered separately.Uses stringers and bottom shelves shown inthe charts to the right (privacy panel not available).

PART NO. FOR USE WITHALL22.5 24" depth topALL28.5 30" depth topALL34.5 36" depth top

INDUSTRIAL LEG PRIVACY PANEL

TECHNICAL LEG PRIVACY PANEL

Leg HeightsUse the leg heights shown below tomatch a cabinet pedestal in a leg-plus-cabinet below worksurface configuration.

LEG HEIGHT MATCHES CAB. PEDESTAL27 1/2" 600 height without base29 1/2" 600 height with 2" base31 1/2" 600 height with 4" base33 1/2" 600 height with 6" base or

750 height without base35 1/2" mobile 600 height with mobile base39 1/2" 900 height without base

How to order a stringer, bottomshelf or privacy panel 1. Select top length2. Specify left-hand (facing the

workbench) bench support (box ■).NLL = Lista LegNTL = technical bench legNW = narrow width cabinetMP = MP width cabinet

3. Specify right-hand (facing theworkbench) bench support (box ■).NLL = Lista LegNTL = technical bench legNW = narrow width cabinetMP = MP width cabinet

EXAMPLE: to order a bottom shelffor a workbench with a 72" top, anMP Width cabinet as the left-handpedestal and a technical bench legas the right-hand pedestal, the partnumber would be BS-72MPNTL.

75

Stringers/Foot RestsHeavy gauge U channel with 2 mounting holeson each end plate.

PART NO. TOP LENGTHNST-48 ■ ■ 48"NST-60 ■ ■ 60"NST-72 ■ ■ 72"NST-84 ■ ■ 84"NST-96 ■ ■ 96"

Bottom ShelvesHeavy gauge steel shelf, for use as storage orfoot rest.

PART NO. TOP LENGTHNBS-48 ■ ■ 48"NBS-60 ■ ■ 60"NBS-72 ■ ■ 72"NBS-84 ■ ■ 84"NBS-96 ■ ■ 96"

Privacy PanelsSteel panel attaches to leg or cabinet and runsfull length of benchtop.

PART NO. TOP LENGTHNPP-48 ■ ■ 48"NPP-60 ■ ■ 60"NPP-72 ■ ■ 72"NPP-84 ■ ■ 84"NPP-96 ■ ■ 96"

Technical Bench LegsComes with glides for leveling on uneven sur-faces. Can be configured for right or left handinstallation. Assembly is required. Removableend caps allow access to glides. Removableside panel can be ordered in a different color.

PART NO. TOP DEPTH27 1⁄ 2" (700mm) HighNTL27.5x22.5 24" (610mm)NTL27.5x28.5 30" (762mm)29 1⁄ 2" (750mm) HighNTL29.5x22.5 24" (610mm)NTL29.5x28.5 30" (762mm)31 1⁄ 2" (800mm) HighNTL31.5x22.5 24" (610mm)NTL31.5x28.5 30" (762mm)33 1⁄ 2" (850mm) HighNTL33.5x22.5 24" (610mm)NTL33.5x28.5 30" (762mm)35 1⁄ 2" (900mm) HighNTL35.5x22.5 24" (610mm)NTL35.5x28.5 30" (762mm)39 1⁄ 2" (1000mm) HighNTL39.5x22.5 24" (610mm)NTL39.5x28.5 30" (762mm)

74

Workbench Below-Worksurface Accessories

Lista LegsEach welded one-piece leg assembly is 3 1⁄ 8"wide heavy gauge steel. Each foot has a bot-tom hole for leveling glide or anchor for floormounting. To order leveling glides, add“-G” to the end of the part number.

PART NO. TOP DEPTH27 1⁄ 2" (700mm) HighNLL27.5x22.5 24" (610mm)NLL27.5x28.5 30" (762mm)NLL27.5x34.5 36" (915mm)29 1⁄ 2" (750mm) HighNLL29.5x22.5 24" (610mm)NLL29.5x28.5 30" (762mm)NLL29.5x34.5 36" (915mm)31 1⁄ 2" (800mm) HighNLL31.5x22.5 24" (610mm)NLL31.5x28.5 30" (762mm)NLL31.5x34.5 36" (915mm)33 1⁄ 2" (850mm) HighNLL33.5x22.5 24" (610mm)NLL33.5x28.5 30" (762mm)NLL33.5x34.5 36" (915mm)39 1⁄ 2" (1000mm) HighNLL39.5x22.5 24" (610mm)NLL39.5x28.5 30" (762mm)NLL39.5x34.5 36" (915mm)

Lista Mobile LegsSame basic construc-tion as the standard legbut with 2 factorymounted 6" heavy dutycasters. Leg is availablewith rigid casters orswivel casters withlocks, indicated by“RB” or “SB” at theend of the part number.Requires stringer.

Rigid CastersPART NO. HEIGHT TOP DEPTHNM33.5X22.5RB 33 1⁄ 2" (850mm) 24" (610mm)NM33.5X28.5RB 33 1⁄ 2" (850mm) 30" (762mm)NM33.5X34.5RB 33 1⁄ 2" (850mm) 36" (915mm)NM35.5X22.5RB 35 1⁄ 2" (900mm) 24" (610mm)NM35.5X28.5RB 35 1⁄ 2" (900mm) 30" (762mm)NM35.5X34.5RB 35 1⁄ 2" (900mm) 36" (915mm)

Swivel CastersPART NO. HEIGHT TOP DEPTHNM33.5X22.5SB 33 1⁄ 2" (850mm) 24" (610mm)NM33.5X28.5SB 33 1⁄ 2" (850mm) 30" (762mm)NM33.5X34.5SB 33 1⁄ 2" (850mm) 36" (915mm)NM35.5X22.5SB 35 1⁄ 2" (900mm) 24" (610mm)NM35.5X28.5SB 35 1⁄ 2" (900mm) 30" (762mm)NM35.5X34.5SB 35 1⁄ 2" (900mm) 36" (915mm)

Lista PanelLegsSame basic construc-tion as the standardLista Leg with awelded panel on theoutside of the leg.For Lista Legs only.

PART NO. TOP DEPTH27 1⁄ 2" (700mm) HighNPL27.5x22.5 24" (610mm)NPL27.5x28.5 30" (762mm)NPL27.5x34.5 36" (915mm)29 1⁄ 2" (750mm) HighNPL29.5x22.5 24" (610mm)NPL29.5x28.5 30" (762mm)NPL29.5x34.5 36" (915mm)31 1⁄ 2" (800mm) HighNPL31.5x22.5 24" (610mm)NPL31.5x28.5 30" (762mm)NPL31.5x34.5 36" (915mm)33 1⁄ 2" (850mm) HighNPL33.5x22.5 24" (610mm)NPL33.5x28.5 30" (762mm)NPL33.5x34.5 36" (915mm)39 1⁄ 2" (1000mm) HighNPL39.5x22.5 24" (610mm)NPL39.5x28.5 30" (762mm)NPL39.5x34.5 36" (915mm)

The components on these two

pages are the options available for

supporting your workbench top.

Workbenches may also be sup-

ported by a pair of cabinets, or by

one cabinet plus one of the legs

shown on these pages.

All parts must be ordered

separately.

How to order workbench below-worksurface accessories1. Select benchtop length (see

page 73).2. Select base configuration, includ-

ing number of cabinets (if any),cabinet size (Narrow Width, MP Width) and number of legs (if any). Note: Sets of legs must beordered at matching heights.Individual legs must be ordered tomatch the overall height of thecabinet or cabinet plus base (seechart to right).

3. Select stringer, bottom shelf orprivacy panel part numbers tocorrespond to both length ofbenchtop and base configuration.

4. Specify color from the chart onthe back cover.

Technical Mobile LegsComes with 2 factory-mounted 31⁄ 2" x 11⁄ 4"casters. Leg is available with rigid casters orswivel casters with locks, indicated by “RB” or “SB” at the end of the part number. Astringer is required for 2- leg models.

PART NO. FOR USE WITHRigid CastersTM33.5X22.5RB 24" depth topTM33.5X28.5RB 30" depth topSwivel CastersTM33.5X22.5SB 24" depth topTM33.5X28.5SB 30" depth top

Bolting Adjustable Height LegsWorkbench height is adjusted by bolting framein place. Height adjusts in 2" increments.Range is 27 1⁄ 2" to 39 1⁄ 2". Workbench topand accessories must be ordered separately.Uses stringers and bottom shelves shown inthe charts to the right (privacy panel not available).

PART NO. FOR USE WITHALL22.5 24" depth topALL28.5 30" depth topALL34.5 36" depth top

INDUSTRIAL LEG PRIVACY PANEL

TECHNICAL LEG PRIVACY PANEL

Leg HeightsUse the leg heights shown below tomatch a cabinet pedestal in a leg-plus-cabinet below worksurface configuration.

LEG HEIGHT MATCHES CAB. PEDESTAL27 1/2" 600 height without base29 1/2" 600 height with 2" base31 1/2" 600 height with 4" base33 1/2" 600 height with 6" base or

750 height without base35 1/2" mobile 600 height with mobile base39 1/2" 900 height without base

How to order a stringer, bottomshelf or privacy panel 1. Select top length2. Specify left-hand (facing the

workbench) bench support (box ■).NLL = Lista LegNTL = technical bench legNW = narrow width cabinetMP = MP width cabinet

3. Specify right-hand (facing theworkbench) bench support (box ■).NLL = Lista LegNTL = technical bench legNW = narrow width cabinetMP = MP width cabinet

EXAMPLE: to order a bottom shelffor a workbench with a 72" top, anMP Width cabinet as the left-handpedestal and a technical bench legas the right-hand pedestal, the partnumber would be BS-72MPNTL.

77

Height-Right® Electric BasesWorkbench top and accessories must beordered separately. Includes stringer.

PART NO. FOR USE WITH TOP SIZEHR4830E 48" x 30"HR6030E 60" x 30"HR7230E 72" x 30"HR4836E 48" x 36"HR6036E 60" x 36"HR7236E 72" x 36"

Height-Right Mobile KitComes with four 3 1⁄ 2" x 1 1⁄4" swivel cast-ers, 2 with lock and 2 without lock. Castersadd 4 3 ⁄4" to overall height. To order, add“-M” to end of electric or manualcrank base part number.

Height-Right Manual CrankBasesWorkbench height is adjusted by non-electricmanual crank. Workbench top and accessoriesmust be ordered separately. Includes stringer.

PART NO. FOR USE WITH TOP SIZEHR4830C 48" x 30"HR6030C 60" x 30"HR7230C 72" x 30"HR4836C 48" x 36"HR6036C 60" x 36"HR7236C 72" x 36"

Height-Right Hanging CabinetsThese cabinets provide convenient below-work-surface storage where less than a full cabinetpedestal (see right) is needed. All NarrowWidth (NW) cabinets are 16 7⁄8" wide x 28 1⁄ 2"deep. All MP Width cabinets are 22 3 ⁄16"wide x 28 1⁄ 2" deep. Each cabinet is sus-pended from the workbench top, and comeswith an individual lock and 2 keys.

PART NO. DRAWER HEIGHTHC/NW50-HR 1 3 ⁄ 8"HC/NW75-HR 2 3 ⁄ 8" HC/NW100-HR 3 3 ⁄ 8" HC/NW150-HR 5 1⁄ 4" HC/NW300FFH-HR 11" HC/MP50-HR 1 3 ⁄ 8" HC/MP75-HR 2 3 ⁄ 8" HC/MP100-HR 3 3 ⁄ 8" HC/MP150-HR 5 1⁄ 4"

Height-Right CompanionCabinetsCabinet fits over workbench stringer. Height ofcabinet conforms to lowest height of Height-Right benchtop. Height-Right Easy-Order cabinets are shown to the right.

PART NO. DRAWERS COMPARTS.NW375-4-■ 5 -NW375-4A-■ 5 44

DRAWER INTERIOR75N 01875N 20975N 20975N 10475N 104

5" BASE

Height-Right Easy-Order CabinetsCabinets are 24 3⁄16" high (includingbase) x 16 7⁄8" wide x 28 1⁄2" deep.

How to order a Height-Right Easy-Order Cabinet1. Select Easy-Order Cabinet Combi-

nation either with or withoutdrawer interior sets. An “A” atthe end of the part number (i.e.,NW375-2A) designates that thecabinet comes with drawer inte-rior sets (shown on page 13).

2. Select lock type (box ■). For lockoptions see page 42.N = none K = keyed-alikeI = individual M = master

3. Select color(s) for housing anddrawer fronts (see back cover forcolor chart).

EXAMPLE: to order an NW375-2Acabinet with an individual lock, and aBright Blue cabinet housing and PearlGray drawers, the part number wouldbe NW375-2A-I , and the paint colorcodes would be “BB” for the housingand “PG” for the drawer fronts.

PART NO. DRAWERS COMPARTS.NW375-3-■ 4 -NW375-3A-■ 4 26

DRAWER INTERIOR75N 20975N 209100N 104125N 104

5" BASE

PART NO. DRAWERS COMPARTS.NW375-2-■ 3 -NW375-2A-■ 3 17

DRAWER INTERIOR75N 209100N 104200N 104

5" BASE

PART NO. DRAWERS COMPARTS.NW375-1-■ 2 -NW375-1A-■ 2 9

DRAWER INTERIOR75N 209300N-FFH FILE DRAWER

5" BASE

76

Height-Right® Workbenches

The Height-Right workbench is

a clean, aesthetically pleasing

workbench that brings to the user

an unsurpassed level of ergonomic

comfort, flexible functionality and

enhanced productivity. With an

electrically adjustable bench height

ranging from 28" to 43" (15"

total), this workspace solution is

designed with the operator in

mind. It reduces fatigue, stress and

potential injury. The Height-Right

workbench is ideally suited for the

repairing, testing, and assembling

of mechanical and electronic prod-

ucts and components.

Innovative features include:

• Precision drive system for relia-

bility and low maintenance

• Available in 48", 60" and 72"

lengths and 30" and 36" depths

(custom sizes are available upon

request)

• Available in ten standard colors

(shown on the back cover)

• Load capacity 1200 lb. static and

600 lb. dynamic

• One foot per minute adjusting

speed

Compatible with all Lista above-worksurface workbench options

Plastic laminate, maple, ESD and phenolic worksurfaces

Easily accessible operator switch

Removable leg panel, allows fortwo-tone color selections

Optional companion cabinet orhanging cabinet

Removable leg endcaps, for clean lookand quick access to

leveling adjustments

Companion cabinet (see column to farright) fits perfectly under the Height-Right benchtop at its lowest 28" height.

77

Height-Right® Electric BasesWorkbench top and accessories must beordered separately. Includes stringer.

PART NO. FOR USE WITH TOP SIZEHR4830E 48" x 30"HR6030E 60" x 30"HR7230E 72" x 30"HR4836E 48" x 36"HR6036E 60" x 36"HR7236E 72" x 36"

Height-Right Mobile KitComes with four 3 1⁄ 2" x 1 1⁄4" swivel cast-ers, 2 with lock and 2 without lock. Castersadd 4 3 ⁄4" to overall height. To order, add“-M” to end of electric or manualcrank base part number.

Height-Right Manual CrankBasesWorkbench height is adjusted by non-electricmanual crank. Workbench top and accessoriesmust be ordered separately. Includes stringer.

PART NO. FOR USE WITH TOP SIZEHR4830C 48" x 30"HR6030C 60" x 30"HR7230C 72" x 30"HR4836C 48" x 36"HR6036C 60" x 36"HR7236C 72" x 36"

Height-Right Hanging CabinetsThese cabinets provide convenient below-work-surface storage where less than a full cabinetpedestal (see right) is needed. All NarrowWidth (NW) cabinets are 16 7⁄8" wide x 28 1⁄ 2"deep. All MP Width cabinets are 22 3 ⁄16"wide x 28 1⁄ 2" deep. Each cabinet is sus-pended from the workbench top, and comeswith an individual lock and 2 keys.

PART NO. DRAWER HEIGHTHC/NW50-HR 1 3 ⁄ 8"HC/NW75-HR 2 3 ⁄ 8" HC/NW100-HR 3 3 ⁄ 8" HC/NW150-HR 5 1⁄ 4" HC/NW300FFH-HR 11" HC/MP50-HR 1 3 ⁄ 8" HC/MP75-HR 2 3 ⁄ 8" HC/MP100-HR 3 3 ⁄ 8" HC/MP150-HR 5 1⁄ 4"

Height-Right CompanionCabinetsCabinet fits over workbench stringer. Height ofcabinet conforms to lowest height of Height-Right benchtop. Height-Right Easy-Order cabinets are shown to the right.

PART NO. DRAWERS COMPARTS.NW375-4-■ 5 -NW375-4A-■ 5 44

DRAWER INTERIOR75N 01875N 20975N 20975N 10475N 104

5" BASE

Height-Right Easy-Order CabinetsCabinets are 24 3⁄16" high (includingbase) x 16 7⁄8" wide x 28 1⁄2" deep.

How to order a Height-Right Easy-Order Cabinet1. Select Easy-Order Cabinet Combi-

nation either with or withoutdrawer interior sets. An “A” atthe end of the part number (i.e.,NW375-2A) designates that thecabinet comes with drawer inte-rior sets (shown on page 13).

2. Select lock type (box ■). For lockoptions see page 42.N = none K = keyed-alikeI = individual M = master

3. Select color(s) for housing anddrawer fronts (see back cover forcolor chart).

EXAMPLE: to order an NW375-2Acabinet with an individual lock, and aBright Blue cabinet housing and PearlGray drawers, the part number wouldbe NW375-2A-I , and the paint colorcodes would be “BB” for the housingand “PG” for the drawer fronts.

PART NO. DRAWERS COMPARTS.NW375-3-■ 4 -NW375-3A-■ 4 26

DRAWER INTERIOR75N 20975N 209100N 104125N 104

5" BASE

PART NO. DRAWERS COMPARTS.NW375-2-■ 3 -NW375-2A-■ 3 17

DRAWER INTERIOR75N 209100N 104200N 104

5" BASE

PART NO. DRAWERS COMPARTS.NW375-1-■ 2 -NW375-1A-■ 2 9

DRAWER INTERIOR75N 209300N-FFH FILE DRAWER

5" BASE

76

Height-Right® Workbenches

The Height-Right workbench is

a clean, aesthetically pleasing

workbench that brings to the user

an unsurpassed level of ergonomic

comfort, flexible functionality and

enhanced productivity. With an

electrically adjustable bench height

ranging from 28" to 43" (15"

total), this workspace solution is

designed with the operator in

mind. It reduces fatigue, stress and

potential injury. The Height-Right

workbench is ideally suited for the

repairing, testing, and assembling

of mechanical and electronic prod-

ucts and components.

Innovative features include:

• Precision drive system for relia-

bility and low maintenance

• Available in 48", 60" and 72"

lengths and 30" and 36" depths

(custom sizes are available upon

request)

• Available in ten standard colors

(shown on the back cover)

• Load capacity 1200 lb. static and

600 lb. dynamic

• One foot per minute adjusting

speed

Compatible with all Lista above-worksurface workbench options

Plastic laminate, maple, ESD and phenolic worksurfaces

Easily accessible operator switch

Removable leg panel, allows fortwo-tone color selections

Optional companion cabinet orhanging cabinet

Removable leg endcaps, for clean lookand quick access to

leveling adjustments

Companion cabinet (see column to farright) fits perfectly under the Height-Right benchtop at its lowest 28" height.

79

Instrument Riser Shelf SupportsEither 16", 20" or 24" high, channel-frontwith smooth finished corners and removableside panels. 20" and 24" models provideextra space to run air lines or meet additionalpower requirements. Ordered individually.

16" Instrument Riser Shelf SupportsPART NO. HEIGHT DESCRIPTIONIRSS16 16" no powerIRSS16/15 16" with 15 ampIRSS16/20 16" with 20 amp IRSS16/GF-15 16" with 15 amp GFCI

20" Instrument Riser Shelf SupportsPART NO. HEIGHT DESCRIPTIONIRSS20 20" no powerIRSS20/15 20" with 15 amp IRSS20/20 20" with 20 amp IRSS20/GF-15 20" with15 amp GFCI

24" Instrument Riser Shelf SupportsPART NO. HEIGHT DESCRIPTIONIRSS24 24" no powerIRSS24/15 24" with 15 amp IRSS24/20 24" with 20 amp IRSS24/GF-15 24" with15 amp GFCI

Instrument Riser ShelvesAll shelves measure 1 1⁄4" thick x 12" or 15"deep and mount to shelf supports. Add “12”or “15” in place of the red box in the partnumber to specify a shelf depth of 12" or 15"Backstops for instrument riser shelves can beordered from the chart on page 78.

Static Dissipative Instrument RiserShelves*PART NO. LENGTH FINISHSD48■ 48" white laminateSD60■ 60" white laminateSD72■ 72" white laminateSD84■** 84" white laminateSD96■** 96" white laminate* See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord. ** Lista recommends using a center support with 84" and 96" shelves

Plastic Laminate Instrument RiserShelvesPART NO. LENGTH FINISHPS48■ 48" gray laminatePS60■ 60" gray laminatePS72■ 72" gray laminatePS84■* 84" gray laminatePS96■* 96" gray laminate* Lista recommends using a center support with 84" and 96" shelves

Maple Instrument Riser ShelvesPART NO. LENGTH FINISHMS48■ 48" mapleMS60■ 60" mapleMS72■ 72" mapleMS84■* 84" mapleMS96■* 96" maple* Lista recommends using a center support with 84" and 96" shelves

Instrument Riser Shelf Rear PanelsFull rear panel extends from benchtop to formback panel between the worksurface and risershelf, flush with the shelf. Also available with a 2" backstop for the riser shelf. To order abackstop for an instrument riser shelf withoutrear panel, see the chart on page 78.

Rear PanelPART NO. TOP SHELF SUPPORT

LENGTH HEIGHTIRS-FRP4816 48" 16"IRS-FRP4820 48" 20"IRS-FRP4824 48" 24"IRS-FRP6016 60" 16"IRS-FRP6020 60" 20"IRS-FRP6024 60" 24"IRS-FRP7216 72" 16"IRS-FRP7220 72" 20"IRS-FRP7224 72" 24"

Rear Panel with 2" BackstopPART NO. TOP SHELF SUPPORT

LENGTH HEIGHTIRS-FRP4816-2 48" 16"IRS-FRP4820-2 48" 20"IRS-FRP4824-2 48" 24"IRS-FRP6016-2 60" 16"IRS-FRP6020-2 60" 20"IRS-FRP6024-2 60" 24"IRS-FRP7216-2 72" 16"IRS-FRP7220-2 72" 20"IRS-FRP7224-2 72" 24"

Outlet StripsAvailable in 15 amp or 20 amp, and GFCI.Lighted on/off switch, 6' cord with groundedplug and circuit breaker. 110V.

PART NO. DESCRIP. OUTLETS LGTH.EOP15-15 15 amp 6 15"EOP15-20 20 amp 6 15"EOP15-GF-15 GFCI-15 amp 6 15"EOP-48 15 amp 8 48"

ESD Accessories

Wrist Strap and Cord3M Charge-Guard® adjustable wrist strap with5' coiled cord.

PART NO. DESCRIPTIONWS wrist strap and cord

Ground Block and CordGround block provides a convenient commongrounding location for 2 wrist straps. Mounts to any flat, rigid surface. Ground cords areincluded with static dissipative tops andshelves, but can be ordered separately.

PART NO. DESCRIPTIONGB ground blockGCT ground cord for topGCS ground cord for shelf

Static Dissipative PlasticLaminate TopSee page 73.

Static Dissipative Plastic InsertBoxesSee page 119.

Static Dissipative PaintSee back cover for paint colors available withESD properties.

●■

■■■■■■

Shelf ground

Wrist strap

To earth ground

Ground block Common ground

•

•

• ••

78

Workbench Above-Worksurface Accessories

The bench components on these

two pages allow you to customize

above the worksurface for your

particular needs.

All parts must be ordered sepa-

rately to match the length of the

workbench top you have chosen.

Backstops and EndstopsMade of steel with rounded edges for safety.Stops extend approximately 3" above theworkbench top.

BackstopsPART NO. TOP LENGTHTBS-48 48"TBS-60 60"TBS-72 72"TBS-84 84"TBS-96 96"

Backstop and Endstop SetsPART NO. TOP LENGTHBES-48 48"BES-60 60"BES-72 72"BES-84 84"BES-96 96"

Adjustable Riser ShelfAssembliesShelves measure 1 1⁄4" thick x 12" deep,available in laminated gray plastic, static dissi-pative white plastic or maple. Shelf can beadjusted in 1 1⁄2" increments from a low of12" to an overall height of 18". A separatesteel backstop with rounded corners is avail-able for the shelf. Includes the number ofadjustable support brackets shown in the charts.

Plastic Adjustable Riser Shelf AssemblyPART NO. TOP LENGTH SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS96P 96" 3

Static Dissipative Adjustable Riser ShelfAssembly*PART NO. TOP LENGTH SUPPORTSARS48SD 48" 2ARS60SD 60" 2ARS72SD 72" 2ARS84SD 84" 3ARS96SD 96" 3*See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord.

Maple Adjustable Riser Shelf AssemblyPART NO. TOP LENGTH SUPPORTSARS48M 48" 2ARS60M 60" 2ARS72M 72" 2ARS84M 84" 2ARS96M 96" 3

Riser Shelf Backstops (For Adjustableand Instruments Risers)

Made of steel with rounded edges for safety.Stops extend approximately 3" above the shelfsurface.

PART NO. TOP LENGTHARSBS-48 48"ARSBS-60 60"ARSBS-72 72"ARSBS-84 84"ARSBS-96 96"

Adjustable Support Bracket

This support bracket, which must be orderedseparately, provides additional support forheavy loads.

PART NO.ARS-BR

Stationary Riser ShelvesMade of steel to support heavy loads. Shelf is10 1⁄2" deep x 13 1⁄2" high. Optional full rearpanel (shown above) extends from benchtopto form back panel and backstop for shelf (partnumber ending in -2). Contact Lista for othersizes.

Open Riser Shelvesopen shelf (open back, no shelf backstop)

PART NO. TOP LENGTHSRS48 48"SRS60 60"SRS72 72"SRS84 84"SRS96 96"

Open Riser Shelves with Shelf Backstopshelf with backstop (open back)

PART NO. TOP LENGTHSRS48-1 48"SRS60-1 60"SRS72-1 72"SRS84-1 84"SRS96-1 96"

Riser Shelves with Full Panel (Shown)closed back, with shelf backstop

PART NO. TOP LENGTH DESCRIPTIONSRS48-2 48" riser shelfSRS60-2 60" riser shelfSRS72-2 72" riser shelfSRS84-2 84" riser shelfSRS96-2 96" riser shelfES any endstops (pair)

ES

D AVAILABLE

79

Instrument Riser Shelf SupportsEither 16", 20" or 24" high, channel-frontwith smooth finished corners and removableside panels. 20" and 24" models provideextra space to run air lines or meet additionalpower requirements. Ordered individually.

16" Instrument Riser Shelf SupportsPART NO. HEIGHT DESCRIPTIONIRSS16 16" no powerIRSS16/15 16" with 15 ampIRSS16/20 16" with 20 amp IRSS16/GF-15 16" with 15 amp GFCI

20" Instrument Riser Shelf SupportsPART NO. HEIGHT DESCRIPTIONIRSS20 20" no powerIRSS20/15 20" with 15 amp IRSS20/20 20" with 20 amp IRSS20/GF-15 20" with15 amp GFCI

24" Instrument Riser Shelf SupportsPART NO. HEIGHT DESCRIPTIONIRSS24 24" no powerIRSS24/15 24" with 15 amp IRSS24/20 24" with 20 amp IRSS24/GF-15 24" with15 amp GFCI

Instrument Riser ShelvesAll shelves measure 1 1⁄4" thick x 12" or 15"deep and mount to shelf supports. Add “12”or “15” in place of the red box in the partnumber to specify a shelf depth of 12" or 15"Backstops for instrument riser shelves can beordered from the chart on page 78.

Static Dissipative Instrument RiserShelves*PART NO. LENGTH FINISHSD48■ 48" white laminateSD60■ 60" white laminateSD72■ 72" white laminateSD84■** 84" white laminateSD96■** 96" white laminate* See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord. ** Lista recommends using a center support with 84" and 96" shelves

Plastic Laminate Instrument RiserShelvesPART NO. LENGTH FINISHPS48■ 48" gray laminatePS60■ 60" gray laminatePS72■ 72" gray laminatePS84■* 84" gray laminatePS96■* 96" gray laminate* Lista recommends using a center support with 84" and 96" shelves

Maple Instrument Riser ShelvesPART NO. LENGTH FINISHMS48■ 48" mapleMS60■ 60" mapleMS72■ 72" mapleMS84■* 84" mapleMS96■* 96" maple* Lista recommends using a center support with 84" and 96" shelves

Instrument Riser Shelf Rear PanelsFull rear panel extends from benchtop to formback panel between the worksurface and risershelf, flush with the shelf. Also available with a 2" backstop for the riser shelf. To order abackstop for an instrument riser shelf withoutrear panel, see the chart on page 78.

Rear PanelPART NO. TOP SHELF SUPPORT

LENGTH HEIGHTIRS-FRP4816 48" 16"IRS-FRP4820 48" 20"IRS-FRP4824 48" 24"IRS-FRP6016 60" 16"IRS-FRP6020 60" 20"IRS-FRP6024 60" 24"IRS-FRP7216 72" 16"IRS-FRP7220 72" 20"IRS-FRP7224 72" 24"

Rear Panel with 2" BackstopPART NO. TOP SHELF SUPPORT

LENGTH HEIGHTIRS-FRP4816-2 48" 16"IRS-FRP4820-2 48" 20"IRS-FRP4824-2 48" 24"IRS-FRP6016-2 60" 16"IRS-FRP6020-2 60" 20"IRS-FRP6024-2 60" 24"IRS-FRP7216-2 72" 16"IRS-FRP7220-2 72" 20"IRS-FRP7224-2 72" 24"

Outlet StripsAvailable in 15 amp or 20 amp, and GFCI.Lighted on/off switch, 6' cord with groundedplug and circuit breaker. 110V.

PART NO. DESCRIP. OUTLETS LGTH.EOP15-15 15 amp 6 15"EOP15-20 20 amp 6 15"EOP15-GF-15 GFCI-15 amp 6 15"EOP-48 15 amp 8 48"

ESD Accessories

Wrist Strap and Cord3M Charge-Guard® adjustable wrist strap with5' coiled cord.

PART NO. DESCRIPTIONWS wrist strap and cord

Ground Block and CordGround block provides a convenient commongrounding location for 2 wrist straps. Mounts to any flat, rigid surface. Ground cords areincluded with static dissipative tops andshelves, but can be ordered separately.

PART NO. DESCRIPTIONGB ground blockGCT ground cord for topGCS ground cord for shelf

Static Dissipative PlasticLaminate TopSee page 73.

Static Dissipative Plastic InsertBoxesSee page 119.

Static Dissipative PaintSee back cover for paint colors available withESD properties.

●■

■■■■■■

Shelf ground

Wrist strap

To earth ground

Ground block Common ground

•

•

• ••

78

Workbench Above-Worksurface Accessories

The bench components on these

two pages allow you to customize

above the worksurface for your

particular needs.

All parts must be ordered sepa-

rately to match the length of the

workbench top you have chosen.

Backstops and EndstopsMade of steel with rounded edges for safety.Stops extend approximately 3" above theworkbench top.

BackstopsPART NO. TOP LENGTHTBS-48 48"TBS-60 60"TBS-72 72"TBS-84 84"TBS-96 96"

Backstop and Endstop SetsPART NO. TOP LENGTHBES-48 48"BES-60 60"BES-72 72"BES-84 84"BES-96 96"

Adjustable Riser ShelfAssembliesShelves measure 1 1⁄4" thick x 12" deep,available in laminated gray plastic, static dissi-pative white plastic or maple. Shelf can beadjusted in 1 1⁄2" increments from a low of12" to an overall height of 18". A separatesteel backstop with rounded corners is avail-able for the shelf. Includes the number ofadjustable support brackets shown in the charts.

Plastic Adjustable Riser Shelf AssemblyPART NO. TOP LENGTH SUPPORTSARS48P 48" 2ARS60P 60" 2ARS72P 72" 2ARS84P 84" 3ARS96P 96" 3

Static Dissipative Adjustable Riser ShelfAssembly*PART NO. TOP LENGTH SUPPORTSARS48SD 48" 2ARS60SD 60" 2ARS72SD 72" 2ARS84SD 84" 3ARS96SD 96" 3*See page 73 for static dissipative specifications. Comes with grounding bolt and grounding cord.

Maple Adjustable Riser Shelf AssemblyPART NO. TOP LENGTH SUPPORTSARS48M 48" 2ARS60M 60" 2ARS72M 72" 2ARS84M 84" 2ARS96M 96" 3

Riser Shelf Backstops (For Adjustableand Instruments Risers)

Made of steel with rounded edges for safety.Stops extend approximately 3" above the shelfsurface.

PART NO. TOP LENGTHARSBS-48 48"ARSBS-60 60"ARSBS-72 72"ARSBS-84 84"ARSBS-96 96"

Adjustable Support Bracket

This support bracket, which must be orderedseparately, provides additional support forheavy loads.

PART NO.ARS-BR

Stationary Riser ShelvesMade of steel to support heavy loads. Shelf is10 1⁄2" deep x 13 1⁄2" high. Optional full rearpanel (shown above) extends from benchtopto form back panel and backstop for shelf (partnumber ending in -2). Contact Lista for othersizes.

Open Riser Shelvesopen shelf (open back, no shelf backstop)

PART NO. TOP LENGTHSRS48 48"SRS60 60"SRS72 72"SRS84 84"SRS96 96"

Open Riser Shelves with Shelf Backstopshelf with backstop (open back)

PART NO. TOP LENGTHSRS48-1 48"SRS60-1 60"SRS72-1 72"SRS84-1 84"SRS96-1 96"

Riser Shelves with Full Panel (Shown)closed back, with shelf backstop

PART NO. TOP LENGTH DESCRIPTIONSRS48-2 48" riser shelfSRS60-2 60" riser shelfSRS72-2 72" riser shelfSRS84-2 84" riser shelfSRS96-2 96" riser shelfES any endstops (pair)

ES

D AVAILABLE

81

PART NO. DOES NOT INCLUDEWB53-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS103-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS203-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB63-■ -■ optional hanging cabinet

Workbenches with AdjustableRiser ShelfTop and riser shelf include backstop.Workbench includes endstops.

PART NO. DOES NOT INCLUDEWS113-■ -■ cabinet pedestal**use MP600 housing without base

How to order Easy-Order CabinetsThe 2 columns to the right of eachcabinet illustration indicate drawerheights and drawer interior sets. (Fordrawer capacities and sizes, see page11.) Below the illustration, you willfind part numbers, the number ofdrawers, and the number of drawercompartments created by the interiorsets (shown on page 15).

1. Select Easy-Order Cabinet Combi-nation either with or withoutdrawer interior sets. An “A” atthe end of the part number (i.e.,MP600-2A) designates that thecabinet comes with drawer inte-rior sets (shown on page 15).

2. Select lock type (box ■). For lockoptions see page 42.N = noneI = individualK = keyed-alikeM = master

3. Select color(s) for housing anddrawer fronts (see page 43 forcolor chart).

EXAMPLE: to order an MP600-2Acabinet with an individual lock, and aBright Blue cabinet housing and PearlGray drawers, the part numberwould be MP600-2A-I , and the paintcolor codes would be “BB” for thehousing and “PG” for the drawerfronts.

15 3⁄4" overall heightPART NO. DRAWERS COMPARTS.MP300-2-■ 3 -MP300-2A-■ 3 23

DRAWER INTERIOR75N 510100N 209125N 104

15 3⁄4" overall heightPART NO. DRAWERS COMPARTS.MP300-3-■ 2 -MP300-3A-■ 2 13

DRAWER INTERIOR100N 209200N 104

PART NO. DRAWERS COMPARTS.MP600-2-■ 5 -MP600-2A -■ 5 57

DRAWER INTERIOR75N 51075N 018100N 316150N 209

200N 104

6" BASE

PART NO. DRAWERS COMPARTS.MP600-3-■ 4 -MP600-3A-■ 4 33

DRAWER INTERIOR100N 316150N 209

150N 104

200N 104

6" BASE

DRAWER INTERIOR75N 02875N 316100N 209150N 209

150N 104

200N 104

INCLUDES INTERIOR150N 104

600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF

PART NO. DRAWERS COMPARTS.MP750-2-■ 6 -MP750-2A -■ 6 70

PART NO. DRAWERS COMPARTS.MP750-19-■ 1 -MP750-19A -■ 1 4

PART NO. DRAWERS COMPARTS.MP600-19-■ 1 -MP600-19A -■ 1 4

INCLUDES INTERIOR150N 104

450 DOOR

BOTTOM SHELF

6" BASE

80

Industrial Easy-Order Workbench Combinations

All workbench tops have a standardsquare edge and are 30" deep. Workbench components shown in grayin the illustrations do not come withthe workbench and must be orderedseparately. To choose Easy-Order cabinet pedestals, see page 12 forNarrow Width cabinets and page 14for MP Width cabinets, or see page81 for frequently ordered cabinetpedestals. For hanging cabinets, seepage 81.Series WB5_ and WS10_ bencheshave Lista Legs. The height of the legsof WB5_ and WS10_ benches is 33 1⁄ 2". The height of the legs ofWB6_ and WS11_ benches is 35 1⁄ 2".

How to order an Industrial Easy-Order Workbench1. Select top length (box ■).

60 = 60" length72 = 72" length96 = 96" length

2. Select top style (box ■).L = Lista TopS = Steel topP = Plastic topM = Maple topSee page 73 for workbench topdescriptions.

3. Select cabinets (where applica-ble). See pages 42-43 for cabinetordering information.

4. Select color(s) for workbenchcomponents (see back cover forcolor chart).

EXAMPLE: to order a WS101 work-bench with a 72" plastic top, and anNW600-2A-I cabinet pedestal with aBright Blue cabinet housing and PearlGray drawers, the workbench partnumber would be WS101-72-P , the cabinet part number would beNW600-2A-I, and the paint colorcodes would be “BB” for the work-bench components and cabinet hous-ing, and “PG” for the drawer fronts.

PART NO. DOES NOT INCLUDEWB50-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS100-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS200-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB60-■ -■ optional hanging cabinet

Workbenches with No Above-Worksurface Accessories

PART NO. DOES NOT INCLUDEWS110-■ -■ cabinet pedestal**use MP600 housing without base

PART NO. DOES NOT INCLUDEWB51-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS101-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS201-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB61-■ -■ optional hanging cabinet

Workbenches with Backstop and Endstops

PART NO. DOES NOT INCLUDEWS111-■ -■ cabinet pedestal**use MP600 housing without base

PART NO. DOES NOT INCLUDEWB52-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS102-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS202-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB62-■ -■ optional hanging cabinet

Workbenches with StationaryRiser ShelfRiser shelf includes backstop and full rear panel.Workbench includes endstops.

PART NO. DOES NOT INCLUDEWS112-■ -■ cabinet pedestal**use MP600 housing without base

Workbench PedestalsThe Easy -Order MP Width cabinets below areamong our most popular as below-worksurfacestorage for workbenches. All are 33 1⁄ 2" highx 22 3 ⁄16" wide x 28 1⁄ 2" deep. See the column to the right for ordering instructions.For additional choices of Easy -Order cabinetpedestals, see page 12 for Narrow Width cabi-nets and page 14 for MP Width cabinets.

Workbench HangingCabinets

The cabinets below provide convenient below-worksurface storage where less than a full cabi-net pedestal is needed.

Single DrawerAll Narrow Width (NW) units are 16 7⁄8" wide x 28 1⁄ 2" deep. All MP Width units are 22 3 ⁄16" wide x 28 1⁄ 2" deep. Each unit is suspended from the workbench top, andcomes with an individual lock and 2 keys.

PART NO. DRAWER HEIGHTHC/NW50-WB 1 3 ⁄ 8"HC/NW75-WB 2 3 ⁄ 8" HC/NW100-WB 3 3 ⁄ 8" HC/NW150-WB 5 1⁄ 4" HC/NW300FFH-WB 11" HC/MP50-WB 1 3 ⁄ 8" HC/MP75-WB 2 3 ⁄ 8" HC/MP100-WB 3 3 ⁄ 8" HC/MP150-WB 5 1⁄ 4"

Hanging CabinetsThese hanging cabinets are available eitherwith or without drawer interior sets. See column to far right for ordering instructions.

81

PART NO. DOES NOT INCLUDEWB53-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS103-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS203-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB63-■ -■ optional hanging cabinet

Workbenches with AdjustableRiser ShelfTop and riser shelf include backstop.Workbench includes endstops.

PART NO. DOES NOT INCLUDEWS113-■ -■ cabinet pedestal**use MP600 housing without base

How to order Easy-Order CabinetsThe 2 columns to the right of eachcabinet illustration indicate drawerheights and drawer interior sets. (Fordrawer capacities and sizes, see page11.) Below the illustration, you willfind part numbers, the number ofdrawers, and the number of drawercompartments created by the interiorsets (shown on page 15).

1. Select Easy-Order Cabinet Combi-nation either with or withoutdrawer interior sets. An “A” atthe end of the part number (i.e.,MP600-2A) designates that thecabinet comes with drawer inte-rior sets (shown on page 15).

2. Select lock type (box ■). For lockoptions see page 42.N = noneI = individualK = keyed-alikeM = master

3. Select color(s) for housing anddrawer fronts (see page 43 forcolor chart).

EXAMPLE: to order an MP600-2Acabinet with an individual lock, and aBright Blue cabinet housing and PearlGray drawers, the part numberwould be MP600-2A-I , and the paintcolor codes would be “BB” for thehousing and “PG” for the drawerfronts.

15 3⁄4" overall heightPART NO. DRAWERS COMPARTS.MP300-2-■ 3 -MP300-2A-■ 3 23

DRAWER INTERIOR75N 510100N 209125N 104

15 3⁄4" overall heightPART NO. DRAWERS COMPARTS.MP300-3-■ 2 -MP300-3A-■ 2 13

DRAWER INTERIOR100N 209200N 104

PART NO. DRAWERS COMPARTS.MP600-2-■ 5 -MP600-2A -■ 5 57

DRAWER INTERIOR75N 51075N 018100N 316150N 209

200N 104

6" BASE

PART NO. DRAWERS COMPARTS.MP600-3-■ 4 -MP600-3A-■ 4 33

DRAWER INTERIOR100N 316150N 209

150N 104

200N 104

6" BASE

DRAWER INTERIOR75N 02875N 316100N 209150N 209

150N 104

200N 104

INCLUDES INTERIOR150N 104

600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF

PART NO. DRAWERS COMPARTS.MP750-2-■ 6 -MP750-2A -■ 6 70

PART NO. DRAWERS COMPARTS.MP750-19-■ 1 -MP750-19A -■ 1 4

PART NO. DRAWERS COMPARTS.MP600-19-■ 1 -MP600-19A -■ 1 4

INCLUDES INTERIOR150N 104

450 DOOR

BOTTOM SHELF

6" BASE

80

Industrial Easy-Order Workbench Combinations

All workbench tops have a standardsquare edge and are 30" deep. Workbench components shown in grayin the illustrations do not come withthe workbench and must be orderedseparately. To choose Easy-Order cabinet pedestals, see page 12 forNarrow Width cabinets and page 14for MP Width cabinets, or see page81 for frequently ordered cabinetpedestals. For hanging cabinets, seepage 81.Series WB5_ and WS10_ bencheshave Lista Legs. The height of the legsof WB5_ and WS10_ benches is 33 1⁄ 2". The height of the legs ofWB6_ and WS11_ benches is 35 1⁄ 2".

How to order an Industrial Easy-Order Workbench1. Select top length (box ■).

60 = 60" length72 = 72" length96 = 96" length

2. Select top style (box ■).L = Lista TopS = Steel topP = Plastic topM = Maple topSee page 73 for workbench topdescriptions.

3. Select cabinets (where applica-ble). See pages 42-43 for cabinetordering information.

4. Select color(s) for workbenchcomponents (see back cover forcolor chart).

EXAMPLE: to order a WS101 work-bench with a 72" plastic top, and anNW600-2A-I cabinet pedestal with aBright Blue cabinet housing and PearlGray drawers, the workbench partnumber would be WS101-72-P , the cabinet part number would beNW600-2A-I, and the paint colorcodes would be “BB” for the work-bench components and cabinet hous-ing, and “PG” for the drawer fronts.

PART NO. DOES NOT INCLUDEWB50-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS100-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS200-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB60-■ -■ optional hanging cabinet

Workbenches with No Above-Worksurface Accessories

PART NO. DOES NOT INCLUDEWS110-■ -■ cabinet pedestal**use MP600 housing without base

PART NO. DOES NOT INCLUDEWB51-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS101-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS201-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB61-■ -■ optional hanging cabinet

Workbenches with Backstop and Endstops

PART NO. DOES NOT INCLUDEWS111-■ -■ cabinet pedestal**use MP600 housing without base

PART NO. DOES NOT INCLUDEWB52-■ -■ optional hanging cabinet

stringer

PART NO. DOES NOT INCLUDEWS102-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDEWS202-■ -■ cabinet pedestals

PART NO. DOES NOT INCLUDEWB62-■ -■ optional hanging cabinet

Workbenches with StationaryRiser ShelfRiser shelf includes backstop and full rear panel.Workbench includes endstops.

PART NO. DOES NOT INCLUDEWS112-■ -■ cabinet pedestal**use MP600 housing without base

Workbench PedestalsThe Easy -Order MP Width cabinets below areamong our most popular as below-worksurfacestorage for workbenches. All are 33 1⁄ 2" highx 22 3 ⁄16" wide x 28 1⁄ 2" deep. See the column to the right for ordering instructions.For additional choices of Easy -Order cabinetpedestals, see page 12 for Narrow Width cabi-nets and page 14 for MP Width cabinets.

Workbench HangingCabinets

The cabinets below provide convenient below-worksurface storage where less than a full cabi-net pedestal is needed.

Single DrawerAll Narrow Width (NW) units are 16 7⁄8" wide x 28 1⁄ 2" deep. All MP Width units are 22 3 ⁄16" wide x 28 1⁄ 2" deep. Each unit is suspended from the workbench top, andcomes with an individual lock and 2 keys.

PART NO. DRAWER HEIGHTHC/NW50-WB 1 3 ⁄ 8"HC/NW75-WB 2 3 ⁄ 8" HC/NW100-WB 3 3 ⁄ 8" HC/NW150-WB 5 1⁄ 4" HC/NW300FFH-WB 11" HC/MP50-WB 1 3 ⁄ 8" HC/MP75-WB 2 3 ⁄ 8" HC/MP100-WB 3 3 ⁄ 8" HC/MP150-WB 5 1⁄ 4"

Hanging CabinetsThese hanging cabinets are available eitherwith or without drawer interior sets. See column to far right for ordering instructions.

83

PART NO. DOES NOT INCLUDETWB014-■ -■ optional hanging cabinetFlexWorks Accessory System is surface mounted

Workbenches with 48" HighFlexWorks Accessory SystemIncludes 48" starter frame, 48" adder frame,(2) 12" shelves, (1) 15" shelf, backstop, horizontal power strip, markerboard/tackboardand louvered panel.

Workbenches with 30" HighFlexWorks® Accessory SystemIncludes 30" starter frame, 30" adder frame,(2) 12" shelves, plastic box rail, backstop,vertical power strip and markerboard/tackboard.

PART NO. DOES NOT INCLUDETWB013-■ -■ optional hanging cabinetFlexWorks Accessory System is surface mounted

■■■■■■

■

PART NO. DOES NOT INCLUDETWB113-■ -■ cabinet pedestalFlexWorks Accessory System is surface mounted

■■■■■■

■

■■■■■■■

---------------------------------------------------------------------------------------------------

PART NO. DOES NOT INCLUDETWB114-■ -■ cabinet pedestalFlexWorks Accessory System is surface mounted

■■■■■■■

---------------------------------------------------------------------------------------------------

PART NO. DOES NOT INCLUDETWB214-■*-■ cabinet pedestalsFlexWorks Accessory System is surface mounted* 48" top not recommended

PART NO. DOES NOT INCLUDETWB213-■*-■ cabinet pedestalsFlexWorks Accessory System is surface mounted* 48" top not recommended

■■■■■■

■

PART NO.TWB313-■ -■FlexWorks Accessory System is rear mountedfeatures Height-Right® adjustable base

■■■■■■

■

■■■■■■■

---------------------------------------------------------------------------------------------------

PART NO.TWB314-■ -■FlexWorks Accessory System is rear mountedfeatures Height-Right adjustable base

■■■■■■■

---------------------------------------------------------------------------------------------------

82

Technical Easy-Order Workbench Combinations

All workbench tops have a radius/bullnose front edge and are 30" deep.Workbench components shown in grayin the illustrations do not come withthe workbench and must be orderedseparately. To choose Easy-Order cabinet pedestals, see page 12 forNarrow Width cabinets and page 14for MP Width cabinets, or see page81 for frequently ordered cabinetpedestals. For hanging cabinets, seepage 81.Series TWB01_ and TWB11_ bencheshave technical legs. Series TWB31_benches include a Height-Right®

electrically-powered base (see pages76-77 for further details). The heightof the legs of TWB01_ and TWB11_benches is 33 1⁄ 2".

How to order a Technical Easy-Order Workbench1. Select top length (box ■).

48 = 48" length60 = 60" length72 = 72" length

2. Select top style (box ■).P = Plastic topM = Maple topE = ESDSee page 73 for workbench topdescriptions.

3. Select cabinets (where applica-ble). See pages 42-43 for cabinetordering information.

4. Select color(s) for workbenchcomponents (see back cover forcolor chart).

EXAMPLE: to order a TWB111work-bench with a 72" plastic top, and anNW600-2A-I cabinet pedestal with aBright Blue cabinet housing and PearlGray drawers, the workbench partnumber would be TWB111-72-P ,the cabinet part number would beNW600-2A-I, and the paint colorcodes would be “BB” for the work-bench components and cabinet hous-ing, and “PG” for the drawer fronts.

Workbenches with Backstop

PART NO. DOES NOT INCLUDETWB010-■ -■ optional hanging cabinet

PART NO. DOES NOT INCLUDETWB110-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDETWB210-■*-■ cabinet pedestals* 48" top not recommended

PART NO.TWB310-■ -■features Height-Right adjustable base

PART NO.TWB311-■ -■features Height-Right adjustable base

PART NO.TWB312-■ -■features Height-Right adjustable base

Workbenches with AdjustableRiser ShelfWorkbench and riser shelf include backstops.

PART NO. DOES NOT INCLUDETWB012-■ -■ optional hanging cabinet

PART NO. DOES NOT INCLUDETWB112-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDETWB212-■*-■ cabinet pedestals* 48" top not recommended

Workbenches with InstrumentRiser ShelfWorkbench includes a backstop, a riser shelfbackstop and a 15 amp, 6-outlet power strip.Instrument risers are 16" high. Riser shelf is12" deep.

PART NO. DOES NOT INCLUDETWB011-■ -■ optional hanging cabinet

PART NO. DOES NOT INCLUDETWB111-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDETWB211-■*-■ cabinet pedestals* 48" top not recommended

■■■■■■

■■■■■■

■■■■■■

■■■■■■

83

PART NO. DOES NOT INCLUDETWB014-■ -■ optional hanging cabinetFlexWorks Accessory System is surface mounted

Workbenches with 48" HighFlexWorks Accessory SystemIncludes 48" starter frame, 48" adder frame,(2) 12" shelves, (1) 15" shelf, backstop, horizontal power strip, markerboard/tackboardand louvered panel.

Workbenches with 30" HighFlexWorks® Accessory SystemIncludes 30" starter frame, 30" adder frame,(2) 12" shelves, plastic box rail, backstop,vertical power strip and markerboard/tackboard.

PART NO. DOES NOT INCLUDETWB013-■ -■ optional hanging cabinetFlexWorks Accessory System is surface mounted

■■■■■■

■

PART NO. DOES NOT INCLUDETWB113-■ -■ cabinet pedestalFlexWorks Accessory System is surface mounted

■■■■■■

■

■■■■■■■

---------------------------------------------------------------------------------------------------

PART NO. DOES NOT INCLUDETWB114-■ -■ cabinet pedestalFlexWorks Accessory System is surface mounted

■■■■■■■

---------------------------------------------------------------------------------------------------

PART NO. DOES NOT INCLUDETWB214-■*-■ cabinet pedestalsFlexWorks Accessory System is surface mounted* 48" top not recommended

PART NO. DOES NOT INCLUDETWB213-■*-■ cabinet pedestalsFlexWorks Accessory System is surface mounted* 48" top not recommended

■■■■■■

■

PART NO.TWB313-■ -■FlexWorks Accessory System is rear mountedfeatures Height-Right® adjustable base

■■■■■■

■

■■■■■■■

---------------------------------------------------------------------------------------------------

PART NO.TWB314-■ -■FlexWorks Accessory System is rear mountedfeatures Height-Right adjustable base

■■■■■■■

---------------------------------------------------------------------------------------------------

82

Technical Easy-Order Workbench Combinations

All workbench tops have a radius/bullnose front edge and are 30" deep.Workbench components shown in grayin the illustrations do not come withthe workbench and must be orderedseparately. To choose Easy-Order cabinet pedestals, see page 12 forNarrow Width cabinets and page 14for MP Width cabinets, or see page81 for frequently ordered cabinetpedestals. For hanging cabinets, seepage 81.Series TWB01_ and TWB11_ bencheshave technical legs. Series TWB31_benches include a Height-Right®

electrically-powered base (see pages76-77 for further details). The heightof the legs of TWB01_ and TWB11_benches is 33 1⁄ 2".

How to order a Technical Easy-Order Workbench1. Select top length (box ■).

48 = 48" length60 = 60" length72 = 72" length

2. Select top style (box ■).P = Plastic topM = Maple topE = ESDSee page 73 for workbench topdescriptions.

3. Select cabinets (where applica-ble). See pages 42-43 for cabinetordering information.

4. Select color(s) for workbenchcomponents (see back cover forcolor chart).

EXAMPLE: to order a TWB111work-bench with a 72" plastic top, and anNW600-2A-I cabinet pedestal with aBright Blue cabinet housing and PearlGray drawers, the workbench partnumber would be TWB111-72-P ,the cabinet part number would beNW600-2A-I, and the paint colorcodes would be “BB” for the work-bench components and cabinet hous-ing, and “PG” for the drawer fronts.

Workbenches with Backstop

PART NO. DOES NOT INCLUDETWB010-■ -■ optional hanging cabinet

PART NO. DOES NOT INCLUDETWB110-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDETWB210-■*-■ cabinet pedestals* 48" top not recommended

PART NO.TWB310-■ -■features Height-Right adjustable base

PART NO.TWB311-■ -■features Height-Right adjustable base

PART NO.TWB312-■ -■features Height-Right adjustable base

Workbenches with AdjustableRiser ShelfWorkbench and riser shelf include backstops.

PART NO. DOES NOT INCLUDETWB012-■ -■ optional hanging cabinet

PART NO. DOES NOT INCLUDETWB112-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDETWB212-■*-■ cabinet pedestals* 48" top not recommended

Workbenches with InstrumentRiser ShelfWorkbench includes a backstop, a riser shelfbackstop and a 15 amp, 6-outlet power strip.Instrument risers are 16" high. Riser shelf is12" deep.

PART NO. DOES NOT INCLUDETWB011-■ -■ optional hanging cabinet

PART NO. DOES NOT INCLUDETWB111-■ -■ cabinet pedestal

PART NO. DOES NOT INCLUDETWB211-■*-■ cabinet pedestals* 48" top not recommended

■■■■■■

■■■■■■

■■■■■■

■■■■■■

85

FramesFlexWorks starter frames consist of 2 uprightposts and a universal top rail. Adder sets con-sist of an additional upright and the top rail.Frames are sturdy, heavy gauge steel, and arenotched front and back at 1" increments formounting shelves and accessories. Frames alsofeature threaded side holes at 4" incrementsfor system accessories.

A 48" high upright is required for benches withlight fixtures and other overhead accessories. A 30" height is standard when no overheadaccessories are required.

30" High Frame Starter SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2130 21 1 ⁄4"WF2730 27 1 ⁄4"WF3330 33 1 ⁄4"WF3930 39 1 ⁄4"WF4530 45 1 ⁄4"

30" High Frame Adder SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2130A 21 1 ⁄4"WF2730A 27 1 ⁄4"WF3330A 33 1 ⁄4"WF3930A 39 1 ⁄4"WF4530A 45 1 ⁄4"

48" High Frame Starter SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2148 21 1 ⁄4"WF2748 27 1 ⁄4"WF3348 33 1 ⁄4"WF3948 39 1 ⁄4"WF4548 45 1 ⁄4"

48" High Frame Adder SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2148A 21 1 ⁄4"WF2748A 27 1 ⁄4"WF3348A 33 1 ⁄4"WF3948A 39 1 ⁄4"WF4548A 45 1 ⁄4"

84

FlexWorks® Accessory System

Lista’s FlexWorks Accessory

System is highly functional and

flexible. It has been designed to

cost-effectively meet the needs of

a broad variety of jobs.

The System has been ergonomi-

cally designed, providing for easy

accessibility with no stretch or

strain, reducing the risk of injury

and increasing productivity.

Like all Lista storage compo-

nents, the FlexWorks Accessory

System is modular and allows for

easy reconfiguration. It can easily

Overhead light fixtureTool rail

Reversible markerboard/tackboard

Adjustable shelfwith shelf dividers

Monitor shelfLouvered panel

Horizontal power rail Large document holder

be adapted or expanded to meet

changing needs. It can also be

retrofitted to any existing Lista

workbench or other manufacturer’s

workbench. Some FlexWorks com-

ponents can be easily adjusted for

specific tasks within a workshift.

System width is limited only by

your bench length.

All components are available in

ESD paint for static sensitive appli-

cations. Standard colors are shown

on the back cover.

STARTER SECTION WIDTH

STARTER SECTION

➤ ADDER SECTION WIDTH ➤➤➤

ADDER SECTION

FlexWorks® Frames

Available Widths of FlexWorks SystemsThe widths below represent measurements from frame center to frame center. Centerposts are 1 7/8" wide. Inside usable width between posts for 27 length frames is 25 3/8",and for 33 length frames is 31 3/8".

Using 1 SectionSECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH(CENTER-TO-CENTER) (FOOT-TO-FOOT)21 1/4" 24 3/4" 26 3/4"27 1/4" 30 3/4" 32 3/4"33 1/4" 36 3/4" 38 3/4"39 1/4" 42 3/4" 44 3/4""45 1/4" 48 3/4" 50 3/4"

Using 1 Starter and 1 Adder SectionSECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH(CENTER-TO-CENTER) (FOOT-TO-FOOT)21 1/4" + 21 1/4" 46" 48"21 1/4" + 27 1/4" 52" 54"21 1/4" + 33 1/4" 58" 60"21 1/4" + 39 1/4" 64" 66"21 1/4" + 45 1/4" 70" 72"27 1/4" + 27 1/4" 58" 60"27 1/4" + 33 1/4" 64" 66"27 1/4" + 39 1/4" 70" 72"27 1/4" + 45 1/4" 76" 78"33 1/4" + 33 1/4" 70" 72"33 1/4" + 39 1/4" 76" 78"33 1/4" + 45 1/4" 82" 84"39 1/4" + 39 1/4" 82" 84"39 1/4" + 45 1/4" 88" 90"45 1/4" + 45 1/4" 94" 96"

85

FramesFlexWorks starter frames consist of 2 uprightposts and a universal top rail. Adder sets con-sist of an additional upright and the top rail.Frames are sturdy, heavy gauge steel, and arenotched front and back at 1" increments formounting shelves and accessories. Frames alsofeature threaded side holes at 4" incrementsfor system accessories.

A 48" high upright is required for benches withlight fixtures and other overhead accessories. A 30" height is standard when no overheadaccessories are required.

30" High Frame Starter SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2130 21 1 ⁄4"WF2730 27 1 ⁄4"WF3330 33 1 ⁄4"WF3930 39 1 ⁄4"WF4530 45 1 ⁄4"

30" High Frame Adder SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2130A 21 1 ⁄4"WF2730A 27 1 ⁄4"WF3330A 33 1 ⁄4"WF3930A 39 1 ⁄4"WF4530A 45 1 ⁄4"

48" High Frame Starter SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2148 21 1 ⁄4"WF2748 27 1 ⁄4"WF3348 33 1 ⁄4"WF3948 39 1 ⁄4"WF4548 45 1 ⁄4"

48" High Frame Adder SetsPART NO. SEC. WIDTH CENT.-TO-CENT.WF2148A 21 1 ⁄4"WF2748A 27 1 ⁄4"WF3348A 33 1 ⁄4"WF3948A 39 1 ⁄4"WF4548A 45 1 ⁄4"

84

FlexWorks® Accessory System

Lista’s FlexWorks Accessory

System is highly functional and

flexible. It has been designed to

cost-effectively meet the needs of

a broad variety of jobs.

The System has been ergonomi-

cally designed, providing for easy

accessibility with no stretch or

strain, reducing the risk of injury

and increasing productivity.

Like all Lista storage compo-

nents, the FlexWorks Accessory

System is modular and allows for

easy reconfiguration. It can easily

Overhead light fixtureTool rail

Reversible markerboard/tackboard

Adjustable shelfwith shelf dividers

Monitor shelfLouvered panel

Horizontal power rail Large document holder

be adapted or expanded to meet

changing needs. It can also be

retrofitted to any existing Lista

workbench or other manufacturer’s

workbench. Some FlexWorks com-

ponents can be easily adjusted for

specific tasks within a workshift.

System width is limited only by

your bench length.

All components are available in

ESD paint for static sensitive appli-

cations. Standard colors are shown

on the back cover.

STARTER SECTION WIDTH

STARTER SECTION

➤ ADDER SECTION WIDTH ➤➤➤

ADDER SECTION

FlexWorks® Frames

Available Widths of FlexWorks SystemsThe widths below represent measurements from frame center to frame center. Centerposts are 1 7/8" wide. Inside usable width between posts for 27 length frames is 25 3/8",and for 33 length frames is 31 3/8".

Using 1 SectionSECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH(CENTER-TO-CENTER) (FOOT-TO-FOOT)21 1/4" 24 3/4" 26 3/4"27 1/4" 30 3/4" 32 3/4"33 1/4" 36 3/4" 38 3/4"39 1/4" 42 3/4" 44 3/4""45 1/4" 48 3/4" 50 3/4"

Using 1 Starter and 1 Adder SectionSECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH(CENTER-TO-CENTER) (FOOT-TO-FOOT)21 1/4" + 21 1/4" 46" 48"21 1/4" + 27 1/4" 52" 54"21 1/4" + 33 1/4" 58" 60"21 1/4" + 39 1/4" 64" 66"21 1/4" + 45 1/4" 70" 72"27 1/4" + 27 1/4" 58" 60"27 1/4" + 33 1/4" 64" 66"27 1/4" + 39 1/4" 70" 72"27 1/4" + 45 1/4" 76" 78"33 1/4" + 33 1/4" 70" 72"33 1/4" + 39 1/4" 76" 78"33 1/4" + 45 1/4" 82" 84"39 1/4" + 39 1/4" 82" 84"39 1/4" + 45 1/4" 88" 90"45 1/4" + 45 1/4" 94" 96"