Goulds HT 3196 High-Temperature Process Pumps

Global ANSI Process Pump LeaderIntroducing the newest memberto the world’s most popular ANSIpump family... HT 3196Goulds HT 3196 Severe Duty Process Pump� Capacities to 4,500 gpm (1,023 m3/hr.)� Heads to 925 ft (282m)� Temperatures up to 700°F (372°C)� Pressures up to 450 Psig (3,102 kPa)

� Material of Construction• Carbon Steel • Duplex SS (CD4MCu)• Ductile Iron • Alloy 20• 316SS Stainless Steel • Hastelloy C

� Performance Features for Extreme TemperaturesExtended Pump Life• Centerline mounted design allows bi-directional thermal

expansion which maintains shaft alignment for improvedseal and bearing life

• Comprehensive range of seal chambers includingpatented TaperBore Plus™ and Big Bore™ designsmaintain cool and clean seal environments critical forextended seal life

• ™ Power ends featuring heavy duty,large capacity oil sump with finned tube oil coolermaintains cooler oil temperatures for extendedbearing life

� Reduced Maintenance Cost• Interchangeability with 3196 reduces MRO inventories

(All parts except casing are the same as 3196)

• Standard ANSI dimensions simplify installation andsupport pump retrofits of standard foot mounted design

• Back-pull out design facilitates safe and simple maintenance activities

� Markets• Chemical/Petrochemical • Food & Beverage• Pharmaceutical • Rubber & Plastic Manufacturing• Pulp & Paper • Power/Utility

� Applications• Hot Water • Pilot Plants• Thermal Oils / • Electronic Heating and Cooling

Heat Transfer Fluids • Reactor Heating• Die/Mold • Urea

Pre-heating Systems

Model HT 31965 pump sizes

Model HT 3196 /15 pump sizes

Model HT 3196 LF3 low flow pump sizes

Model HT 31965 pump sizes

Goulds HT 3196

2

Goulds HT 3196

3

• Centerline-mounted casing• ANSI Class 300 RF flanges• Graphite casing gasket• Graphite impeller O-ring

• High temperature bolting• Stainless steel shaft• Finned tube oil cooler

Optimized Performance At High Operating Temps Up To 700°F (372°C)

The HT 3196 is furnished with the following standard features:

The HT 3196 delivers...

Thermal expansion due to high temperature process fluidshandling is optimally controlled with centerline mountedcasings. Centerline mounting minimizes shaft misalignmentsince the casing can expand bi-directionally. This samefeature minimizes pipe strain as the casing is permitted togrow in two directions theoretically negating strain onsuction piping.

ANSI Class 300 raised face flanges provide a positivesealing surface to prevent tough-to-seal liquids like hothydrocarbons and heat transfer liquids from escapinginto your regulated environment.

ANSI and PIP ComplianceANSI B73.1M and PIP RESP 73H-97dimensional compliance and ruggedconstruction for proven performance.Heavy duty centerline mounted casingstabilizes shaft alignment andminimizes piping strain whilecompensating for thermal expansionwhen pumping fluids up to processtemperatures of 700° F (372° C).

Sealing FlexibilityThe HT 3196 offers the industry’sgreatest cartridge sealing flexibilitywith optimum seal environmentsincluding Standard Bore, Big Bore andGoulds patented Taper Bore Plus™with VPE rings. Jacketed seal chambersare available for controlling thetemperature of the mechanical seal’senvironment and maximizing seal life.High performance, high temperaturecartridge mechanical seals areavailable from nearly all manufacturersfor optimum sealing reliability.

High Alloy AvailabilityLiquid ends are available in CarbonSteel, Ductile Iron, 316SS, CD4MCu,Alloy 20 and Hastelloy C constructionsto provide materials flexibility forpumping heat transfer fluids, hot oilsand moderate to highly aggressivehot chemicals.

InterchangeabilityCompletely interchangeable with theGoulds model 3196, the world’s mostinstalled ANSI process pump. Allinternal components are commonbetween models except for the casing.The X-series power end providescommon inventory for models 3196,CV 3196, HT 3196, LF 3196,NM 3196, 3198 and 3796.

Lead-timesMaximized partsinterchangeability with theGoulds model 3196 results inoptimized lead-times with our

ANSI product line for fast responseto customer needs.

Five-Year Standard Warranty™ pumps feature a 5-year

warranty that acknowledges superiorperformance, optimum run time, and extended pump life.

The Model HT 3196 is completely interchangeable dimensionallywith the Model 3196. In addition, all internal components arecommon between models except for the casing. The

power end provides common inventory for Models 3196,CV 3196, HT 3196, LF 3196, NM 3196, 3198, 3796, and 3996.

Goulds HT 3196

4

High Temperature Oils and Heat Transfer FluidsThe use of synthetic heat transfer liquids continues to expandas these liquids offer chemical stability and efficient heattransfer properties. In addition, the use of these liquids allowssystem pressures to be reduced for added safety and lowerdesign costs. Hot natural oils and synthetic oils are used in heattransfer, food processing, oil refining and petrochemical miningapplications. Some applications for hot oils and heat transferfluids include computer and power supply, energy storage,transformer cooling, recirculating chillers, train tractionrectifiers, re-flow soldering, industrial processing,pharmaceutical processing and semiconductor processing.

High Temperature Chemical ProcessingThe Goulds Model HT 3196 features superior chemical corrosionresistance through optimal manufacturability of high alloywetted pump components. Offered in Carbon Steel, Ductile Iron,316ss, CD4MCu, Alloy 20 and Hastelloy C, the HT 3196 providesa well-rounded selection of materials to maximize pump life

when pumping hot, aggressive solvents, acids and chlorides.High temperature fluid applications include asphalt, tars,Naphtha, Naphthalene, aromatics, hydrocarbons, urethanes,epoxies, paints, zinc compounds, magnesium compounds,adhesives, plastisizers, polyols, polymers, monomers, resins,oxide slurries, pigments, dyes, inks and many more.

High Temperature Pumping Applications

High Temperature Pumping ExpertiseIn addition to ANSI Process Pump Expertise, ITT-Goulds Pumpsdelivers decades of premier experience in centerline mounted,high temperature pump applications with thousands of pumpmodels installed including the Models 3700, 3910, 3900, 3600,3620, 3640, 3181, and high temperature vertical turbine pumps.

Bonus Interchangeability™ Power Ends Fit 7 Different Process Pumps

Minimize inventory, reduce downtime.

Model 3196

Process Pumps

Model CV 3196Non-ClogProcess Pumps

Model HT 3196High TemperatureProcess Pumps

Model LF 3196Low Flow ANSIProcess Pumps

Model 3198PFA TEFLON®-LinedProcess Pumps

Model 3796Self-PrimingProcess Pumps

Model 3996In-Line ProcessPumps

Interchangeability with the world’s most installed ANSI Process Pump

™

™

Single and dual cartridge mechanical seals for moderatetemperatureapplications.

Single and dual cartridgemechanical seals for hightemperature applications.

Big BoreTM Taper BoreTM Plus

Goulds HT 3196

5

Options High and Low Temperature CapabilityGoulds offers users a variety of options to meet specific plant and process requirements.

JACKETED SEAL CHAMBERMaintains proper temperature control ofsealing environment. Ideal for maintainingtemperature for services such as moltensulphur and polymerizing liquids. Availablein BigBoreTM and TaperBoreTM designs.

CUSTOM FITTED INSULATED FABRICTHERMAL JACKETInsulates and provides thermal retentionof the process fluid within the pump.Insulation jackets are custom fitted andeasily removable for installing andservicing the pump.

HEAT JACKETEconomical clamp-on jacket providespractical method of heating orcooling the casing. Excellent heattransfer characteristics. Easy to installor remove for pump servicing.

Goulds HT 3196 LF Designed for High Temperature, Low Flow Services

EXPANDING VOLUTE PUMP HT 3196 LF CIRCULARVOLUTE PUMP

Reduced Radial Loads For Optimum ReliabilityRadial loads are reduced by as much as 85% compared to end suction expanding volutepumps at low flows. Bearing, mechanical seal and overall pump life are optimized.

High Temperature Seal SelectionShaft Sealing SystemsThe most difficult challenge for pumping hot fluids is toeffectively seal the rotating shaft from emitting excessiveor undesirable fluids into the atmosphere for the purposesof safety and equipment reliability. The selection of theoptimum sealing device forspecific pumping systems issimplified by combining theworld’s premier sealingsuppliers with the perfect hightemperature pumping system.

Multiple high temperature sealing devices and mechanicalseal flushing systems are designed and available for amultitude of challenging high temperature sealingapplications. The standard HT 3196 configuration includesgraphite packing rings in astandard bore box for basic hightemperature fluid applications.

ExpandingVolute

CircularVolute

85% Reduction

0 50 100 150 200

LOW FLOW OPERATING RANGE — GPM

INC

REA

SIN

G R

AD

IAL

LOA

D

HT 3196 LF PUMP CURVE

Goulds HT 3196

6

All ANSI B73.1 seal flush and cooling plansare available to control emission levels andmeet seal installation requirements.Goulds can also provide other specialarrangements of user preference.

CPI PLAN 7311By-pass flushlubricates single seal faces.

CPI PLAN 7353Pressurized circulation

lubricates double seal faces.

Engineered Seal Chamber Selection GuideSERVICE

A C C B C B C C C C C C C

A B C A C A C C C B A C C

A A A C A — A A C A A C C

A A A C — — A A A A A A A

A B C A — — C C A C A A A

Ideally suited

Acceptable

Not Recommended

A

B

C

Water-BasedLiquids

with Flush

EntrainedAir or Vapor

Solids0-10%,no Flush

SolidsGreater

than 10%with Flush

Paper Stock0-5%,

no Flush

Paper Stock0-5%, with

Flush

Slurries0-5%,

no Flush

High BoilingPoint

Liquids,no Flush

TemperatureControl

Self-Ventingand

Draining

Seal FaceHeat

Removal

Molten orPolymerized

Liquid,no Flush

Molten orPolymerizedLiquid with

Flush

Standard BoreDesigned for packing.Also accommodatesmechanical seals.

BigBoreTM

Enlarged chamber forincreased seal lifethrough improvedlubrication and cooling.

PatentedTaperBoreTM PLUSLower seal facetemperatures, self-venting and draining.Solids and vaporscirculated away fromseal faces.

Jacketed Patented TaperBoreTM PLUSMaintains propertemperature control(heating or cooling)of seal environment.

Jacketed BigBoreTM

Maintains propertemperature control(heating or cooling)of seal environment.

Seal Flush Plans

Goulds HT 3196

7

Construction Details All dimensions in inches and (mm).

Diameter at Impeller .75 (19) 1 (25) 1.25 (32) 1.5 (38)Diameter in Stuffing Box/Seal Chamber(Less Sleeve) 1.375 (35) 1.75 (45) 2.125 (54) 2.5 (64)

Shaft (With Sleeve) 1.125 (29) 1.5 (38) 1.875 (48) 2 (51)*

Diameter Between Bearings 1.5 (38) 2.125 (54) 2.5 (64) 3.125 (79)Diameter at Coupling .875 (22) 1.125 (29) 1.875 (48) 2.375 (60)Overhang 6.125 (156) 8.375 (213) 8.375 (213) 9.969 (253)Maximum Shaft Deflection 0.002 (0.05)Shaft Deflection Index (L3/D4)(With Sleeve) 143 116 48 62(Less Sleeve) 64 63 29 25

Sleeve O.D. thru Stuffing Box/Seal Chamber 1.375 (35) 1.75 (45) 2.125 (54) 2.5 (64)*Radial 6207 6309 6311 6313

Bearings Thrust 3306 3309 7310 3313Bearing Span 4.125 (105) 6.75 (171) 6.875 (164) 9.25 (235)

BigBore™Seal Chamber Bore 2.875 (73) 3.5 (89) 3.875 (98) 4.75 (120)*

Stuffing Box Bore 2 (51) 2.5 (64) 2.875 (73) 3.375 (86)*Power Limits HP (kW) per 100 RPM 1.1 (.82) 3.4 (2.6) 5.6 (4.2) 14 (10.5)**

Maximum Liquid Temperature—

TemperatureOil/Grease Lubrication without Cooling

350° F (177° C)

Maximum Liquid Temperature—Oil Lubrication with High Temp. Option

700°F (370° C)

Casing Corrosion Allowance .125 (3)

* 17 inch sizes have 21⁄4 inch (57) shaft diameters in stuffing box/seal chamber with sleeve. Shaft sleeve O.D. is 23⁄4 inches (70) for packing and 21⁄2 inches (64) for mechanical seals.Seal chamber bore is 43⁄4 inches (121). Stuffing box bore is 35⁄8 inches (92).

** 17 inch sizes power limit per 100 RPM is 20HP (15kW).

STANDARD OPTIONAL *Engineered option—requires special baseplate

PLANT REQUIREMENTSCorrosion Resistance (mild/moderate)

Corrosion Resistance (severe)

Machined Pump & Motor Parts

Circular Grout Holes (4 in. min.)

Vent Holes (1 in. min.)

Vent Holes (1/2 in. min.)

Non-Overhang

Full Drain Rim

Built-in Drain Pan (under pump)

Drain Pan Under Pump

Baseplate Leveling Screws

Motor Alignment Adjusters

Lifting Feature

Continuous Welding Used

Flexibly Mounted

Spring Loaded*

Available in 304 and 316 SS

ANSI B73.1-1991 Conformance

API-610 Conformance

PIP RESP 002 Conformance

POLYSHIELDANSI COMBOHeavy duty polymerconcrete combinationbaseplate andfoundation.

ADVANTAGEHeavy duty PIPcompliant fabricatedsteel baseplate.

ENHANCED FEATUREFABRICATED STEELUpgraded ANSI baseplatedesigned to maximizepump operation life andease installation. MeetsAPI-minded chemicalpump users’ toughestrequirements.

FABRICATED STEELAn economical choicethat meets ANSI/ASMEB73.1 dimensionalrequirements.

CHEMBASE PLUSTM

Polymer concreteconstruction providesexceptional rigidity &corrosion resistance. ANSI 1991 dimensional.

CAMBER TOPCAST IRONPreferred standard ofprocess industries. Rigidand corrosion resistant,it is the best value inthe industry today.

BaseplateSelection Guide

Baseplate Mounting SystemsGoulds offers a complete range of pump mounting systems to meet plant requirements; make installation and maintenance easier.

RIGID FRAME FOOT Reduces effects of pipe loads

on shaft alignment; pumpvibration reduced. Especially

significant for high process fluidoperating temperatures.

CONDITION MONITOR(PATENT PENDING)Constantly measures vibration and temperature atthe thrust bearing. Colored LED’s indicate generalpump health. Provides early warning of improperoperation before catastrophic failure occurs.

INPRO VBXX-D HYBRID LABYRINTH SEALSPrevents premature bearing failure causedby lubricant contamination or loss of oil.Stainless steel rotors for optimal performance in corrosive environments.

CONTINUOUS RENEWABLEPERFORMANCEOriginal flow, pressure and efficiency are maintained by simple external adjustmentresulting in long-term energy and repairparts savings.

HEAVY DUTY SHAFT AND BEARINGSRigid shaft designed for minimum deflection atseal faces — less than 0.002 in. (.05 mm).Bearings sized for 10-year average life undertough operating conditions. Available with orwithout shaft sleeve.

OPTIMIZED OIL SUMP DESIGNIncreased oil capacity provides better heat transferfor reduced oil temperature. Bearings run coolerand last longer. Contaminants directed away frombearings to magnetic drain plug.

ONE-INCH BULLS EYE SIGHT GLASSAssures proper oil level critical to bearing life.Allows visual inspection of the oil condition.Bottle oiler optional.

FINNED TUBE OIL COOLERDelivers supplemental cooling to the oil sump forhigh process fluid operating temps.

™ POWER ENDDesigned for reliability, and extended pump lifesupported by a 3-year warranty.

OIL FLINGERframe oil flinger complies with API-610.

DUCTILE IRON FRAME ADAPTERWith material strength equal to carbon steel for

safety and reliability.

HIGH-STRENGTH A193 B7 STEELBOLTS AND STUDS

Extends the pressure and temperature retainingcapabilities while enhancing safety.

TOP CENTERLINE DISCHARGEFor optimum air handling and self-venting

by design.

CARBON GRAPHITE CASE GASKETAND IMPELLER O-RING

For positive sealing at elevated temps.

ANSI CLASS 300 CASINGWall thickness increases reliability and

longer casing life.

FULLY OPEN IMPELLERPreferred design for handling solids that also

allows adjustment to maintain originalefficiencies over time.

ANSI CLASS 300 FLANGESRaised face flanges for positive sealing and high-pressure retention and stability at high operating

temps comply with ANSI B16.5 requirements.

HEAVY-DUTY STEEL CASING SUPPORTRigid design prevents against distortion caused

by pipe strain to maintain shaft alignment.Mounting dimensions are identical to foot-

mounted pumps, which makes retrofits simpleand extends interchangeability.

LOW-THERMAL CONDUCTIVITY316SS SHAFT

Provides optimum heat dissipation to protectbearings. Minimizes heat transfer from pumpage

through shaft to bearings. Bearings run cooler and last longer.MAGNETIC DRAIN

PLUGStandard magnetic drainplug helps protectbearings and prolong life.

98

HT 3196 High-Temperature Process PumpsRugged Design Features for Extreme Process Services

MOUNTING FLANGE Supports optional C-face motor adapterto further ensure shaft alignmentstability and accommodates standardANSI coupling guard.

CENTERLINE MOUNTINGAllows for bi-directional thermal growth

which minimizes shaft deflection and flangeloading for improved seal and bearing life.

Goulds HT 3196

10

Goulds HT 3196

11

Goulds HT 3196

12

*LTi Power End features Duplex Angular Contact® Teflon is a registered trademark for Fluoropolymer Resins, Films, Fibers manufactured by DuPont.

112A

136

122

332A

496

555

100

101

412A

184

351

358

239

228 168A 333A 108 370761B

319 360F 469B 250 418 126

MATERIALItemNumber Part Name Carbon Steel Ductile Iron 316SS CD4MCu Alloy 20 Hastelloy C

100 Casing CS 316SS 316SS CD4MCu Alloy 20 Hastelloy C

101 Impeller Ductile Iron 316SS CD4MCu Alloy 20 Hastelloy C

106 Stuffing Box Packing Graphite

108 Frame Adapter Ductile Iron

112A Thrust Bearing Double Row Angular Contact*

122 Shaft—Less Sleeve (Optional) 316SS 316SS Alloy 20 Hastelloy C

122 Shaft—With Sleeve 316SS

126 Shaft Sleeve 316SS Alloy 20 Hastelloy C

136 Bearing Locknut and Lockwasher Steel

168A Radial Bearing Single Row Deep Groove

184 Stuffing Box Cover (Packed Box) 316SS CD4MCu Alloy 20 Hastelloy C

184 Seal Chamber (Mechanical Seal) Ductile Iron 316SS CD4MCu Alloy 20 Hastelloy C

228 Bearing Frame Cast Iron (Ductile Iron for STi Group)

239 Casing Support Fabricated Steel

250 Gland 316SS CD4MCu Alloy 20 Hastelloy C

370H Stud/Nut, Cover-to-Adapter 304SS

319 Oil Sight Glass Glass/Steel

332A INPRO® Labyrinth Oil Seal (Outboard) Stainless Steel /Bronze

333A INPRO® Labyrinth Oil Seal (Inboard) Stainless Steel /Bronze

351 Casing Gasket Graphite

358 Casing Drain Plug (Optional) 316SS CD4MCu Alloy 20 Hastelloy C

360F Gasket, Frame-to-Adapter Buna

360C Gasket, Bearing End Cover Cellulose Fiber with Binder

370 Cap Screw, Adapter-to-Casing 304SS

412A O-ring, Impeller Graphite

418 Jacking Bolt 304SS

444 Backplate (Dynamic Seal Option) 316SS CD4MCu Alloy 20 Hastelloy C

469B Dowel Pin, Frame-to-Adapter Steel

496 O-ring, Bearing Housing Buna Rubber

555 Bearing Frame Finned Cooler Steel /Copper

761B Condition Monitor Stainless Steel /Epoxy

Parts List and Materials of Construction

Goulds HT 3196

13

Dimensions Model HT 3196

All dimensions in inches and (mm).Not to be used for construction.

Bare PumpGroup Pump ANSI Discharge Suction X A B D SP WeightSize Designation Size Size Lbs. (kg)

1x11/2-6 AA 1 11/2 84 (38)

11/2x3-6 AB 11/2 3 92 (42)

2x3-6 2 3 6.5 (165) 13.5 (343) 4 (102) 5.25 (133) 3.75 (95) 95 (43)

1x11/2-8 AA 1 11/2 100 (45)

11/2x3-8 AB 11/2 3 108 (49)

3x4-7 A70 3 4 11 (280) 220 (100)

2x3-8 A60 2 3 9.5 (242) 220 (91)

3x4-8 A70 3 411 (280) 220 (100)

3x4-8G A70 3 419.5 (495) 4 (102) 8.25 (210)

1x2-10 A05 1 28.5 (216)

200 (91)

11/2x3-10 A50 11/2 3 220 (100)

2x3-10 A60 2 3 9.5 (242) 230 (104)

3x4-10 A70 3 4 11 (280) 3.75 (95) 265 (120)

3x4-10H A40 3 4 12.5 (318) 275 (125)

4x6-10G A80 4 613.5 (343)

4x6-10H A80 4 6305 (138)

11/2x3-13 A20 11/2 3 10.5 (267) 19.5 (495) 4 (102) 10 (254) 245 (111)

2x3-13 A30 2 3 11.5 (292) 275 (125)

3x4-13 A40 3 4 12.5 (318) 330 (150)

4x6-13 A80 4 6 13.5 (343) 405 (184)

6x8-13 A90 6 8 16 (406) 560 (254)

8x10-13 A100 8 10 670 (304)

6x8-15 A110 6 818 (457)

610 (277)

8x10-15 A120 8 10 740 (336)

8x10-15G A120 8 10 19 (483) 27.875 (708) 6 (152) 14.5 (368) 5.25 (133) 710 (322)

8x10-16H 8 10 850 (385)

4x6-17 4 6 16 (406) 650 (295)

6x8-17 6 8 18 (457) 730 (331)8x10-17 8 10 19 (483) 830 (376)

DIMENSIONS

SUCTION

DISCHARGEASP B

X

D

/

Goulds HT 3196

14

Hydraulic Coverage Model HT 3196

CAPACITY — 2850 RPM (50 Hz)

3500/2850 RPM

CAPACITY — 3500 RPM (60 Hz)

TOTA

L H

EAD

— 3

500

RPM

(60

Hz)

TOTA

L H

EAD

— 2

850

RPM

(50

Hz)

/

( )

( )

LF

( )

Scale Change

1x11/2-8

1x11/2-6 11/2 x3-6

11/2 x3-13

11/2 x3-10

11/2 x3-8

11/2 x3-13 (LF)

1x11/2-8

1x2-10

2x3-8 2x3-10

2x3-13

3x4-13

4x6-10

3x4-10

3x4-8G

2x3-6

3x4-7

1x2-10

(LF)

(LF)

11/2 x3-13

11/2 x3-13

1x11/2 -8

1x11/2 -6 11/2 x3-6

11/2 x3-10

11/2 x3-8

(LF)

1x2-10

2x3-10

2x3-6

2x3-8

3x4-13

4x6-13

6x8-13

6x8-15

8x10-13

4x6-10

3x4-10H4x6-10H

3x4-7

2x3-8

3x4-10

2x3-13

CAPACITY — 1450 RPM (50 Hz)

TOTA

L H

EAD

— 1

700

RPM

(60

Hz)

TOTA

L H

EAD

— 1

450

RPM

(50

Hz)

CAPACITY — 1750 RPM (60 Hz)

1750/1450 RPM

Scale Change

/

PRO Services®

ExtendingEquipment Life...

Product Repair (all types and brands of rotating equipment)

• Service Center Repair

• Field Service

• Parts Supply

Reliability Improvement• Inventory Management

• Replacement/Exchange

• Turnkey Repair/Installation

• Training

Optimization of Assets• Predictive Analysis/Condition Monitoring

• Root Cause Failure Analysis

• Pump & System Assessments

• Upgrades – Mechanical & Hydraulic

• Maintenance Management/Contract Maintenance

• Technical Expertise

• Factory Trained ServicePersonnel

• Quality

• Fast Turnaround

• Emergency Service –24 hours/day, 7 days/week

• ISO and Safety Certified

PumpSmart® is the latest advancement in pump control and protection to reduceenergy consumption, increase uptime and decrease maintenance cost. It allows thepump to be right-sized to the application by dialing in the speed and torque whichincreases flow economy, reduces heat and vibration, and improves overall system reliability.

• Simplified Pump Control — PumpSmart was designed specifically to optimizepumping applications and can be used to control a single pump or coordinatebetween multiple pumps without the need for an external controller.

• Pump Protection — PumpSmart guarantees to protect the pump from upsetconditions with patented sensorless pump protection algorithms.

• Smart Flow — PumpSmart features a sensorless flow function for centrifugalpumps that can calculate the flow of the pump within ± 5% of the pump rated flow.

• Drive for the DCS — While most VFDs can only provide basic information,PumpSmart offers unparalleled insight to the pump operation which allows forsmoother process control and efficiency.

• Pump Experts — PumpSmart is a variable speed drive with pump-specificalgorithms imbedded into the drive. With over 150 years of pump knowledge,let the pump experts take responsibility of your pump system.

PUMPSMART

Visit our Web site at www.gouldspumps.com

ProSmart™ encompasses the latest technology*in condition monitoring to transform yourPredictive Maintenance program into a Plant Profitability program. It provides a cost-effective solution to maintaining uptime on all ofyour rotating equipment. ProSmart continuouslymonitors, analyzes and annunciates an alarmwhen critical criteria is not met. By identifying, diagnosing, and sounding an alert to potential equipment problems before theyhave a chance to manifest into unexpected downtime or catastrophicfailure, ProSmart helps to assure plant profitability.

ProSmart delivers benefits that go right to the bottom line.

• Extends equipment life

• Optimizes costly “walk arounds” by skilled personnel

• Can help reduce overall equipment failures and the cost of downtime

• Sends alerts prior to potential catastrophic process failures

• Automatically alerts personnel to machine problems

• Consolidates data for equipment optimization(*Patent pending)

ProSmart is a wireless machinery monitoring system that collects andanalyzes operating data automatically every 5 seconds. Integratedanalysis capabilities provide enhanced data and reporting functions.

© 2008 Goulds Pumps, IncorporatedA subsidiary of ITT Corporation, Inc.Form BHT3196 7/08