gost r iso/iec 27004-2011 information technology. · pdf filegost r iso/iec 27004-2011...

GOST R ISO/IEC 17040-2010 Conformity assessment. General requirements for peer assessment of

conformity assessment bodies and accreditation bodies

GOST R ISO/IEC 27004-2011 Information technology. Security techniques. Information security

management. Measurement

GOST R ISO/IEC 11179-1-2010 Information technology. Metadata registries (MDR). Part 1. Framework

GOST R IEC 60079-0-2011 Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 62485-2-2011 Secondary batteries and battery installations. Safety requirements. Part 2.

Stationary batteries

GOST R IEC 60318-5-2010 Electroacoustics. Simulators of human head and ear. Part 5. 2 cm3 coupler

for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts

GOST R IEC 60118-8-2010 Electroacoustics. Hearing aids. Part 8. Methods of measurement of

performance characteristics of hearing aids under simulated in situ working conditions

GOST R ISO/IEC 27033-1-2011 Information technology. Security techniques. Network security. Part 1.

Overview and concepts

GOST R IEC 62087-2011 Methods of measurement for the power consumption of audio, video and

related equipment

GOST R ISO/IEC 24713-2-2011 Information technology. Biometrics. Biometric profiles for interoperability

and data interchange. Part 2. Physical access control for employees at airports

GOST R ISO/IEC 19762-2-2011 Information technology. Automatic identification and data capture

techniques (AIDC). Harmonized vocabulary. Part 2. Optically readable media (ORM)

GOST R IEC 60695-2-10-2011 Fire hazard testing. Part 2-10. Glowing/hot-wire based test methods.

Glow-wire apparatus and common test procedures

GOST R IEC 62075-2011 Audio/video, information and communication technology equipment.

Environmentally conscious design

GOST R IEC 61309-2011 Deep-fat fryers for household use. Methods for measuring the performance

GOST R ISO/IEC 19762-3-2011 Information technology. Automatic identification and data capture (AIDC)

techniques. Harmonized vocabulary. Part 3. Radio frequency identification (RFID)


techniques. Harmonized vocabulary. Part 4. General terms relating to radio communications

GOST R IEC/ТС 60034-17-2009 Rotating electrical machines. Part 17. Application guide for cage induction

motors when fed from converters

GOST R ISO/IEC 9834-8-2011 Information technology. Open systems interconnection. Procedures for the

operation of OSI registration authoritiers. Part 8. Generation and registration of universally unique

identifiers (UUIDs) and their use as ASN.1 object identifier components


operation of OSI registration authoritiers. Part 9. Registration of object identifier arcs for applications and

services using tagbased identification

GOST R IEC 60695-2-2-2011 Fire hazard testing. Part 2. Test methods. Section 2. Needle-flame test

GOST ISO/IEC 17025-2009 General requirements for the competence of testing and calibration

laboratories

GOST R IEC 60789-2010 Characteristics and test conditions of radionuclide imaging devices. Anger

type gamma cameras

GOST R ISO/IEC 12207-2010 Information technology. System and software engineering. Software life

cycle processes

GOST R IEC 62220-1-2-2010 Medical electrical equipment. Characteristics of digital X-ray imaging

devices. Part 1-2. Determination of the detective quantum efficiency. Detectors used in mammography

GOST R IEC 60336-2010 X-ray tube assemblies for medical diagnosis. Сharacteristics of focal spots

GOST R IEC 60601-2-17-2010 Medical electrical equipment. Part 2-17. Particular requirements for the

safety of automatically-controlled brachytherapy aferloading equipment

GOST R IEC 60079-0-2007 Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60705-2011 Household microwave ovens. Methods for measuring performance

GOST R IEC 60079-33-2011 Explosive atmospheres. Part 33. Equipment protection by special protection

«s»

GOST R IEC 62018-2011 Power consumption of information technology equipment. Measurement

methods

GOST R IEC 60085-2011 Electrical insulation. Thermal evaluation and designation

GOST R IEC 62301-2011 Household electrical appliances. Measurement of standby power

GOST R IEC 60332-3-10-2011 Tests on electric and optical cables under fire conditions. Part 3-10. Flame

spread of vertically-mounted bunched wires or cables. Apparatus


spread of vertically-mounted bunched wires or cables. Apparatus

GOST R ISO/IEC 7811-9-2011 Identification cards. Recording technique. Part 9. Tactile identifier

GOST R ISO/IEC 7811-8-2011 Identification cards. Recording technique. Part 8. Magnetic stripe of

coercivity of 51,7 kA/m (650 Oe)


techniques. Harmonized vocabulary. Part 1. General terms relating to AIDC

GOST R ISO/IEC 31010-2011 Risk management. Guide of risk assessment

GOST R ISO/IEC 17040-2010 Conformity assessment. General requirements for peer assessment of

conformity assessment bodies and accreditation bodies

GOST R ISO/IEC 17020-2010 General criteria for the operation of various types of bodies performing

inspection

GOST R ISO/IEC 19778-1-2011 Information technology. Learning, education and training. Collaborative

technology. Collaborative workplace. Part 1. Collaborative workplace data model

GOST R IEC 60950-23-2011 Information technology equipment. Safety. Part 23. Large data storage

equipment

GOST R IEC 61557-4-2007 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical

safety. Equipment for testing, measuring or monitoring of protective measures. Part 4. Resistance of earth

connection and equipotential bonding

GOST R IEC 60079-19-2011 Explosive atmospheres. Part 19. Equipment repair, overhaul and

reclamation

GOST R IEC 60079-11-2010 Explosive atmospheres. Part 11. Intrinsic safety circuit «i»

GOST R ISO/IEC 19794-5-2006 Automatic identification. Biometrics. Biometric data interchange formats.

Part 5. Face image data

GOST R IEC 61982-1-2011 Secondary batteries for the propulsion of electric road vehicles. Part 1. Test

parameters

GOST R IEC/TR 61948-1-2009 Nuclear medicine instrumentation. Routine tests. Part 1. Radiation counting

systems

GOST R IEC 62127-2-2009 State system for ensuring the uniformity of measurements. Hydrophones.

General requirements for calibration methods in the frequency range up 40 MHz

GOST R IEC 62040-1-1-2009 Uninterruptible power systems (UPS). Part 1-1. General and safety

requirements for UPS used in operator access areas

GOST R IEC 61996-1-2009 Maritime navigation and radiocommunication equipment and systems.

Shipborne voyage data recorder (VDR). Part 1. Voyage data recorder (VDR). Technical and performance

requirements, methods of testing and required test results

GOST R IEC 61850-7-2-2009 Communication networks and systems in substations. Part 7. Basic

communication structure for substation and feeder equipment. Section 2. Abstract communication service

interface (ACSI)


communication structure for substation and feeder equipment. Section 1. Principles and models

GOST R IEC 61207-2-2009 Gas analyzers. Expression of performance. Part 2. Measurement of oxygen

concentration in gas (utilizing high-temperature electrochemical sensors)

GOST R IEC 61207-1-2009 Gas analyzers. Expression of performance. Part 1. General

GOST R IEC 61174-2009 Maritime navigation and radiocommunication equipment and systems.

Electronic chart display and information system (ECDIS). Operational and performance requirements,

methods of testing and required test results

GOST R IEC 60950-1-2009 Information technology equipment. Safety. Part 1. General requirements

GOST R IEC 60942-2009 Sound calibrators. Specifications and test requirements

GOST R IEC 60825-2-2009 Safety of laser products. Part 2. Safety of optical fibre communication

systems

GOST R IEC/TR 60825-9-2009 Safety of laser products. Part 9. Compilation of maximum permissible

exposure to incoherent optical radiation

GOST R IEC 60745-2-8-2009 Hand-held motor-operated electric tools. Safety and test methods. Part 2-8.

Particular requirements for sheet metal shears

GOST R IEC 60745-1-2009 Hand-held motor-operated electric tools. Safety and test methods. Part 1.

General requirements


safety of magnetic resonance equipment for medical diagnosis

GOST R IEC 60086-4-2009 Primary batteries. Part 4. Safety of lithium batteries

GOST R IEC 60065-2009 Audio, video and similar electronic apparatus. Safety requirements

GOST R IEC 60034-12-2009 Rotating electrical machines. Part 12. Starting performance of single-speed

three-phase cage induction motors

GOST R ISO/IEC 19794-8-2009 Automatic identification. Biometric identification. Biometric data

interchange formats. Part 8. Finger pattern skeletal data


interchange formats. Part 3. Finger pattern spectral dаta

GOST R ISO/IEC 8825-4-2009 Information technology. АСН.1 encoding rules. Part 4. XML encoding rules

(XER)

GOST R IEC 60050-826-2009 Electrical installations. Terms and definitions

GOST R ISO/IEC 17000-2009 Conformity assessment. Vocabulary and general principles

GOST R IEC 60601-2-22-2008 Medical electrical equipment. Part 2-22: Particular requirements for the

basic safety and essential performance of surgical, cosmetic, therapeutic and laser equipment


operation of OSI registration authoritiers. Part 2. Registration procedures for OSI document types

GOST R ISO/IEC 17007-2011 Conformity assessment. Guidance for drafting normative documents

suitable for conformity assessment

GOST R ISO/IEC 17024-2011 Conformity assessment. General requirements for bodies operating

certification of persons

GOST R IEC 60745-2-17-2010 Hand-held motor-operated electric tools. Safety and test methods. Part

2-17. Particular requirements for routers and trimmers

GOST R IEC 61513-2011 Nuclear power plants. Instrumentation and control important to safety.

General requirements for systems

GOST R IEC 60709-2011 Nuclear power plants. Instrumentation and control systems important for

safety. Separation


safety. Requirements for electrical supplies


safety. Classification of instrumentation and control functions

GOST R IEC 60880-2010 Nuclear power plants. Instrumentation and control systems important to

safety. Software aspects for computer-based systemsperforming category A functions


Particular requirements for tappers

GOST R IEC 60079-13-2010 Explosive atmospheres. Part 13. Equipment protected by pressurized rooms

«p»

GOST R IEC 62138-2010 Nuclear power plants. Instrumentation and control important for safety.

Software aspects for computer-based systems performing category B or C functions


Particular requirements for screwdrivers and impact wrenches

GOST R IEC 60793-1-31-2010 Optical fibres. Part 1-31. Measurement methods and test procedures.

Tensile strength

GOST R IEC 60793-1-30-2010 Optical fibres. Part 1-30. Measurement methods and test procedures. Fibre

proof test

GOST R ISO/IEC 15963-2011 Information technology. Radio frequency identification for item

management. Unique identification for RF tags

GOST R IEC 60990-2010 Metods of measurement of touch current and protective conductor current

GOST R IEC 60793-1-32-2010 Optical fibres. Part 1-32. Measurement methods and test procedures.

Coating strippability

GOST R IEC 60079-31-2010 Explosive atmospheres. Part 31. Equipment dust ignition protection by

enclosure «t»

GOST R IEC 60079-15-2010 Explosive atmospheres. Part 15. Equipment protection by type of protection

«n»

GOST R IEC 60269-1-2010 Low-voltage fuses. Part 1. General requirements

GOST R IEC 60079-35-1-2011 Caplights for use in mines susceptible to firedamp. Part 1. General

requirements and testing in relation to the risk of explosion

GOST R IEC 61643-12-2011 Low-voltage surge protective devices. Part 12. Surge protective devices

connected to low-voltage power distribution systems. Selection and application principles


safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance


safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance

GOST R IEC 60601-1-2010 Medical electrical equipment. Part 1. General requirements for basic safety

and essential performance

GOST R IEC 62305-1-2010 Risk management. Protection against lightning. Part 1. General principles

GOST R IEC 60335-2-60-2000 Safety of household and similar electrical appliances. Particular

requirements for whirlpool baths and test methods

GOST R IEC 61391-1-2011 Medical ultrasonic diagnostic equipment. General requirements to

calibration methods for distance measurement systems

GOST R IEC 60227-6-2010 Polyvinyl chloride insulated cables of rated voltages up to and including

450/750 V. Part 6. Lift cables and cables for flexible connections

GOST R IEC 60254-2-2009 Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and

marking of polarity on cells

GOST R IEC 61108-2-2010 Maritime navigation and radio communication equipment and systems.

Global navigation satellite systems (GNSS). Part 2. Global navigation satellite system GLONASS. Receiver

equipment. Performance standards. Methods of testing and required test results

GOST R IEC 62305-2-2010 Risk management. Protection against lightning. Part 2. Risk assessment

GOST R ISO/IEC 27005-2010 Information technology. Security techniques. Information security risk

management

GOST R IEC 60044-7-2010 Instrument transformers. Part 7. Electronic voltage transformers

GOST R ISO/IEC 19795-4-2011 Information technology. Biometrics. Biometric performance testing and

reporting. Part 4. Interoperability performance testing

GOST R IEC 60086-1-2010 Primary batteries. Part 1. General

GOST R IEC 60436-2011 Electric dishwashers for household use. Methods for measuring the

performance

GOST R IEC 60079-20-1-2011 Explosive atmospheres. Part 20-1. Material characteristics for gas and

vapour. Classification. Test methods and data

GOST R IEC 62359-2011 Medical equipment. General requirements to methods for determination of

mechanical and thermal fields safe indices for medical ultrasonic diagnostic equipment

GOST R IEC 62552-2011 Household refrigerating appliances. Characteristics and test methods

GOST R IEC/TR 60788-2009 Medical electrical equipment. Glossary

GOST R IEC/TR 60977-2009 Medical electrical equipment. Medical electron accelerators in the range 1

MeV to 50 MeV. Guidelines for functional performance characteristics

GOST R IEC/TR 62266-2009 Medical electrical equipment. Guidelines for implementation of DICOM in

radiotherapy

GOST R IEC 61192-3-2010 Soldered electronic assemblies. Workmanship requirements. Part 3.

Through-hole mount assemblies


General technical requirements

GOST R IEC 61192-2-2010 Soldered electronic assemblies.Workmanship requirements. Part 2.

Surface-mount assemblies


communication structure for substation and feeder equipment. Section 3. Common data clаsses

GOST R IEC 60901-2011 Single-capped fluorescent lamps. Performance requirements


Terminal assemblies


Rework, modification and repair

GOST R IEC 61191-1-2010 Printed boards assemblies. Part 1. Surface mount and related assembly

technologies. General technical requirements

GOST R IEC 60095-2-2010 Lead-acid starter batteries. Part 2. Dimensions of batteries and dimensions

and marking of terminals

GOST R IEC 62067-2011 Power cables with extruded insulation and their accessories for rated

voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV). Test methods and requirements

GOST R IEC 60287-3-3-2011 Electric cables. Calculation of the current rating. Part 3-3. Sections on

operating conditions. Cables crossing external heat sources

GOST R IEC 60287-3-2-2011 Electric cables. Calculation of the current rating. Part 3-2. Sections on

operating conditions. Economic optimization of power cable size

GOST R IEC 60350-2011 Electric cooking ranges, hobs, ovens and grills for household use. Methods

for measuring the performance

GOST R IEC 60840-2011 Power cables with extruded insulation and their accessories for rated

voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements

GOST R IEC 61347-2-3-2011 Lamp controlgear. Part 2-3. Particular requirements for a.c. supplied

electronic ballasts for fluorescent lamps

GOST R IEC 60695-2-11-2010 Fire hazard testing. Part 2-11. Glowing/hot-wire based test methods.

Glow-wire flammability test method for end-products

GOST R ISO/IEC 21827-2010 Information technology. Security techniques. Systems security engineering.

Capability maturity model (SSE-CMM)

GOST R IEC 60695-10-2-2010 Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test

GOST R IEC 60622-2010 Secondary cells and batteries containing alkaline or other non-acid

electrolytes. Sealed nickel-cadmium prismatic rechargeable single cell

GOST R IEC 60192-2011 Low-pressure sodium vapour lamps. Performance requirements

GOST R IEC 61191-2-2010 Printed boards assemblies. Part 2. Surface mount. Technical requirements

GOST R IEC 61191-4-2010 Printed boards assemblies. Part 4. Terminal mouting. Technical

requirements

GOST R ISO/IEC 19784-2-2010 Automatic identification. Biometric identification. Biometric application.

Programming interface. Part 2. Biometric archive function provider interface

GOST R IEC 61674-2006 Medical electrical equipment. Dosimeters with ionization chambers and/or

semi-conductor detectors as used in X-ray diagnostic imaging

GOST R IEC 60095-4-2010 Lead-acid starter batteries. Part 4. Dimensions of batteries for heavy

vehicles


interchange formats. Part 10. Hand geometry silhouette data

GOST R IEC 60127-2-2010 Miniature fuses. Part 2. Cartridge fuse links

GOST R ISO/IEC 7811-7-2010 Identification cards. Recording technique. Part 7. Magnetic stripe of high

coercivity. High recording density

GOST R ISO/IEC 7811-6-2010 Identification cards. Recording technique. Part 6. Magnetic stripe of high

coercivity

GOST R ISO/IEC 10373-1-2010 Identification cards. Test methods. Part 1. General characteristics

GOST R IEC 60079-17-2010 Explosive atmospheres. Part 17. Electrical installations inspection and

maintenance

GOST R IEC 60127-3-2010 Miniature fuses. Part 3. Sub-miniature fuse links

GOST R IEC 61850-6-2009 Communication networks and systems in substations. Part 6. Configuration

description language for communication in electrical substations related to IEDs

GOST R IEC 60332-3-25-2005 Tests on electric and optical cables under fire conditions. Рart 3-25. Flame

spread of vertically-mounted bunched wires or cables. Category D


spread of vertically-mounted bunched wires or cables. Category C


spread of vertically-mounted bunched wires or cables. Category B


spread of vertically-mounted bunched wires or cables. Category A

GOST R IEC 61191-3-2010 Printed boards assemblies. Part 3. Sectional specification. Requirements for

through-hole mount soldered assemblies

GOST R ISO/IEC 11694-1-2010 Identification cards. Optical memory cards. Linear recording method. Part 1.

Physical characteristics

GOST R ISO/IEC 20000-1-2010 Information technology. Service management. Part 1. Specification

GOST R ISO/IEC 15457-2-2010 Identification cards. Thin flexible cards. Part 2. Magnetic recording

techniques

GOST R ISO/IEC 11693-2010 Identification cards. Optical memory cards. General characteristics

GOST R ISO/IEC 7816-1-2010 Identification cards. Integrated circuit(s) cards with contacts. Part 1.

Physical characteristics

GOST R ISO/IEC 10373-5-2010 Identification cards. Test methods. Part 5. Optical memory cards

GOST R ISO/IEC 7811-1-2010 Identification cards. Recording technique. Part 1. Embossing

GOST R ISO/IEC 24778-2010 Information technology. Automatic identification and data capture

techniques. Aztec Code bar code symbology specification

GOST R ISO/IEC 7816-2-2010 Identification cards. Integrated circuit cards. Part 2. Сards with contacts.

Dimensions and location of the contacts


Dimensions and location of the accessible optical area

GOST R ISO/IEC 10373-2-2010 Identification cards. Test methods. Part 2. Cards with magnetic stripes

GOST R IEC 60598-2-13-2010 Luminaries. Part 2-13. Particular requirements. Ground recesses luminaries

GOST R IEC 61207-6-2010 Gas analyzers. Expression of performance. Part 6. Photometric gas analyzers

GOST R IEC 60598-2-11-2010 Luminaries. Part 2-11. Particular requirements. Aquarium luminaries

GOST R ISO/IEC 20000-2-2010 Information technology. Service management. Part 2. Code of practice

GOST R IEC 60079-10-2-2010 Explosive atmospheres. Part 10-2. Classification of areas. Combustible dust

atmospheres

GOST R IEC 60297-3-104-2009 Mechanical structures for electronic equipment. Connector dependent

interface dimensions of subracks and plug-in units. Dimensions of mechanical structures of the 482,6 mm

(19 in) series

GOST R ISO/IEC 26300-2010 Information technology. Open Document Format for Office Applications

(OpenDocument) v1.0

GOST R IEC 60917-2-3-2009 Mechanical structures for electronic equipment practices. Interface

co-ordination dimensions for the 25 mm equipment practice. Dimensions for subracks, chassis, backplanes,

front panels and plug-in units

GOST R IEC 60825-12-2009 Safety of laser products. Part 12. Safety of free space optical

communication systems used for transmission of information


basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

GOST R IEC 60730-1-2002 Automatic electrical controls for household and similar use. General

requirements and test methods

GOST R IEC 60034-2-1-2009 Rotating electrical machines. Part 2-1. Standart methods for determining

losses and efficiency from tests (excluding mashines for traction vehicles)

GOST R ISO/IEC 18045-2008 Information technology. Security techniques. Methodology for IT security

evaluation

GOST R IEC 61121-2011 Tumble dryers for household use. Methods for measuring the performance

GOST R ISO/IEC 24709-1-2009 Automatic identification. Biometric identification. Conformance testing for

the biometric application programing interface (BioAPI). Part 1. Methods and procedures

GOST R IEC 60086-5-2009 Primary batteries. Part 5. Safety of batteries with aqueous electrolyte

GOST R IEC 62040-1-2-2009 Uninterruptible power systems (UPS). Part 1-2. General and safety

requirements for UPS used in restricted access locations


safety. Equipment for testing, measuring or monitoring of protective measures. Part 7. Phase sequence

GOST R IEC 60825-1-2009 Safety of laser products. Part 1. Equipment clаssification, requirements and

user's quide

GOST ISO/IEC 17011-2009 Conformity assessment. General requirements for accreditation bodies.

Accrediting conformity assessment bodies

GOST R IEC 60079-2-2009 Explosive atmospheres. Part 2. Equipment protection by pressurized

enclosure "p"

GOST R IEC 61161-2009 State system for ensuring the uniformity of measurements. Ultrasonic

power in liquids. General requirements to measuring methods in the frequency range 0,5 to 25 MHz

GOST R IEC 60950-22-2009 Information technology equipment. Safety. Part 22. Equipment to be

installed outdoors

GOST R IEC 60079-30-2-2009 Explosive atmospheres. Electrical resistance trace heating. Part 30-2.

Application guide for design, installation and maintenance

GOST R IEC 60068-2-10-2009 Environmental testing. Part 2-10. Tests. Test J and guidance: Mould growth

GOST R IEC 60068-2-2-2009 Environmental testing. Part 2-2. Tests. Test B: Dry heat

GOST R IEC 60068-2-1-2009 Environmental testing. Part 2-1.Tests. Test A: Cold

GOST R IEC 60068-2-30-2009 Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h +

12 h cycle)

GOST R IEC 60068-2-78-2009 Environmental testing. Part-2-78. Tests. Test Cab: Damp heat, steady state

GOST R IEC 62127-1-2009 State system for ensuring the uniformity of measurements. Parameters of

ultrasonic fields. General requirements to measuring methods and characterization of fields in the

frequency range 0,5 to 40 MHz

GOST R IEC 60122-1-2009 Quartz crystal units of assessed quality. Part 1. Generic specification

GOST R ISO/IEC 15504-3-2009 Information technology. Process assessment. Part 3. Guidance to

performing an assessments


safety of electron accelerators in the range 1 MeV to 50 MeV

GOST R ISO/IEC 27006-2008 Information technology. Security techniques. Requirements for bodies

providing audit and certification of information security management systems

GOST R ISO/IEC TR 19791-2008 Information technology. Security techniques. Security assessment of

operational systems

GOST R ISO/IEC 15504-2-2009 Information technology. Process assessment. Part 2. Performing an

assessment

GOST R ISO/IEC 17050-1-2009 Conformity assessment. Supplier's declaration of conformity. Part 1.


GOST R ISO/IEC 17050-2-2009 Conformity assessment. Supplier's declaration of conformity. Part 2.

Supporting documentation

GOST R IEC 61241-17-2009 Electrical apparatus for use in the presence of combustible dust. Part 17.

Inspection and maintenance of electrical installations in hazardous areas (other than mines)

GOST R IEC 61241-18-2009 Еlectrical apparatus for use in the presence of combustible dust. Part 18.

Protection by encapsulation «mD»

GOST R ISO/IEC 15459-6-2009 Automatic identification. Unique identifiers. Part 6. Unique identifiers for

product groupings

GOST R IEC 60079-30-1-2009 Explosive atmospheres. Electrical resistance trace heating. Part 30-1.

General technical requirements and test methods


Protection by intrinsic safety «iD»

GOST R ISO/IEC 15504-1-2009 Information technology. Process assessment. Part 1. Concepts and

vocabulary

GOST R ISO/IEC TR 19795-3-2009 Automatic identification. Biometrics. Part 3. Modality-specific

testing


operation of OSI registration authoritiers. Part 1. General procedures and tor arcs of the ANS. 1 object

identifier tree


operation of OSI registration authoritiers. Part 6. Registration of application processes and application

entities


operation of OSI registration authoritiers. Part 4. Register of VTE profiles


operation of OSI registration authoritiers. Part 5. Register of VT control object definitions

GOST R ISO/IEC 9834-3-2009 Information technology. Open Systems Interconnection. Procedures for the

operation of OSI Registration Authoritiers. Part 3. Registration of Object Identifier arcs beneath the top-level

arc jointly administered by ISO and ITU-T


safety. Equipment for testing, measuring or monitoring of protective measures. Part 6. Residual current

operated protective devices in TT and TN systems

GOST R IEC 62031-2009 LED modules for general lighting. Safety specifications

GOST R ISO/IEC TR 15446-2008 Information technology. Security techniques. Guide for the production of

protection profiles and security targets


450/750 V. Part 5. Flexible cables (cords)

GOST R IEC 60949-2009 Calculation of thermally permissible short-circuit currents, taking into

account non-adiabatic heating effects


450/750 V. Part 1. General requirements

GOST R IEC 60287-2-2-2009 Electric cables. Calculation of the current rating. Part 2-2. Thermal

resistance. A method for calculating reduction factors for groups of cables in free air, protected from solar

radiation

GOST R IEC 60287-1-2-2009 Electric cables. Calculation of the current rating. Part 1-2. Current rating

equations (100 % load factor) and calculation of losses. Sheath eddy current loss factors for two circuits in

flat formation


equations (100 % load factor) and calculation of losses. General

GOST R IEC 60245-1-2009 Rubber insulated cables for rated voltages up to and including 450/750 V.

Part 1. General requirements


equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables

and calculation of circulating current losses

GOST R IEC 60287-2-1-2009 Electric cables. Calculation of the current rating. Part 2-1. Thermal

resistance. Calculation of thermal resistance

GOST R IEC 60724-2009 Short-circuit temperature limits of electric cables with rated voltages of 1

kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

GOST R IEC 60986-2009 Short-circuit temperature limits of electric cables with rated voltages from 6

kV (Um = 7,2 kV) up to 30kV (Um = 36 kV)

GOST R IEC/TR 61948-2-2008 Nuclear medicine instrumentation. Routine tests. Part 2. Scintillation

cameras and single photon emission computed tomography imaging

GOST R ISO/IEC 19795-2-2008 Automatic identification. Biometrics. Biometric performance testing and

reporting. Part 2. Testing methodologies for technology and scenario evaluation

GOST R ISO/IEC 18046-2009 Automatic identification. Radio frequency identification. Radio frequency

identification device performance test methods

GOST R IEC 60050-881-2008 International еlectrotechnical vocabulary. Chapter 881. Radiology and

radiological physics


electrolytes. Vented nickel-cadmium prismatic rechargeable single cells

GOST R IEC 61223-3-5-2008 Evaluation and routine testing in medical imaging departments. Part 3-5.

Acceptance tests. Imaging performance of computed tomography X-ray equipment

GOST R ISO/IEC 16022-2008 Automatic identification. Bar coding. Data Matrix symbology specification

GOST R ISO/IEC 15408-1-2008 Information technology. Security techniques. Evaluation criteria for IT

security. Part 1. Introduction and general model


safety of X-ray equipment for interventional procedures


Part 1. Framework


Part 9. Vascular image data

GOST R IEC 60034-14-2008 Rotating electrical machines. Part 14. Mechanical vibration of certain

machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration


Part 7. Signature/sign time series data

GOST R IEC 62209-1-2008 Human exposure to radio frequency fields from hand-held and

body-mounted wireless communication devices. Human models, instrumentation and procedures. Part 1.

Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to

the ear (frequency range of 300 MHz to 3 GHz)


security. Part 3. Security assurance requirements


security. Part 2. Security functional requirements

GOST R IEC 60601-2-51-2008 Medical electrical equipment. Part 2-51. Particular requirements for safety,

including essential performance, of recording and analysing single channel and multichannel

electrocardiographs


Particular requirements for sanders and polishers other than disk type

GOST R IEC 60252-2-2008 AC motor capacitors. Part 2. Motor start capacitors

GOST R IEC 61157-2008 State system for ensuring the uniformity of measurements. Medical

electrical equipment. Devices for ultrasonic diagnostics. Requirements for the declaration of acoustic output

parameters in technical documents


2-11. Particular requirements for reciprocating saws (jig and sabre saws)

GOST R IEC 60079-14-2008 Explosive atmospheres. Part 14. Electrical installations design, selection and

erection

GOST R IEC 60945-2007 Maritime navigation and radiocommunication equipment and systems.

General requirements. Methods of testing and required test results

GOST R ISO/IEC 17021-2008 Conformity assessment. Requirements for bodies providing audit and

certification of management systems


Selection and installation

GOST R IEC 60079-10-1-2008 Explosive atmospheres. Part 10-1. Classification of areas. Explosive gas

atmospheres

GOST R IEC 60079-25-2008 Explosive atmospheres. Part 25. Intrinsically safe systems

GOST R ISO/IEC TR 18044-2007 Information technology. Security techniques. Information security incident

management

GOST R ISO/IEC TR 10032-2007 Reference model of data management

GOST R ISO/IEC 19785-2-2008 Information identification. Biometrics. Common biometric exchange

formats framework. Part 2. Procedures for the operation of the biometric registration authority

GOST R ISO/IEC 19785-1-2008 Automatic identification. Biometrics. Common biometric exchange formats

framework. Part 1. Data element specification

GOST R ISO/IEC 16085-2007 Risk management. Application for system and software life cycle processes

GOST R IEC 60079-1-2008 Explosive atmospheres. Part 1. Equipment protection by flameproof

enclosures "d"

GOST R ISO/IEC 19784-1-2007 Automatic identification. Biometrics. BioAPI. Biometric application

programming interface. Part 1. BioAPI specification

GOST R ISO/IEC 19795-1-2007 Automatic identification. Biometrics. Biometric performance testing and

reporting. Part 1. Principles and framework

GOST R ISO/IEC 15459-5-2008 Automatic identification. International unique identifiers. Part 5. Unique

identifiers for returnable transport items

GOST R IEC 60605-6-2007 Reliability in techniques. Tests for the validity of the constant failure rate

and failure intensity

GOST R IEC 60079-18-2008 Explosive atmospheres. Part 18. Equipment protection by encapsulation

«m»

GOST R IEC 60079-27-2008 Explosive atmospheres. Part 27. Fieldbus intrinsically safe concept (FISCO)

GOST R IEC 62281-2007 Safety of primary and secondary lithium cells and batteries during transport


electrolytes. Nickel-cadmium prismatic secondary single cells with partial recombination


electrolytes. Secondary lithium cells and batteries for portable applications


electrolytes. Mechanical tests for sealed portable secondary cells and batteries

GOST R IEC 61951-2-2007 Secondary cells and batteries containing alkaline or other non-acid

electrolytes. Portable sealed rechargeable single cells. Part 2. Nickel-metal hydride

GOST R IEC 60034-5-2007 Rotating electrical machines. Part 5. Classification of protection degrees

provided by the integral design of rotating electrical machines (IP code)

GOST ISO/IEC 15459-1-2008 Automatic identification. International unique identifiers. Part 1. Unique

identifiers for transport units

GOST ISO/IEC 15459-2-2008 Automatic identification. International unique identifiers. Part 2.

Registration procedures

GOST R IEC 60838-1-2008 Miscellaneous lampholders. Part 1. General requirements and test methods


safety. Equipment for testing, measuring or monitoring of protective measures. Part 5. Resistance to earth


Part 4. Cords and flexibe cables


Part 8. Cords for applications requiring high flexbility

GOST R IEC 60811-1-4-2008 Common test methods for insulating and sheathing materials of electric and

optical cables. Part 1-4. Methods for general application. Test at low temperature

GOST R IEC 60851-4-2008 Winding wires. Test methods. Part 4. Chemical properties

GOST R IEC 60851-5-2008 Winding wires. Test methods. Part 5. Electrical properties


optical cables. Part 4-1. Methods specific to polyethylene and polypropylene compounds. Resistance to

environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filler

content measurement in polyethylene by direct combustion. Measurement of carbon black content by

thermogravimetric analysis (TGA). Assessment of carbon black dispersion in polyethylene using a

microscope

GOST R IEC 61508-7-2007 Functional safety of electrical, electronic, programmable electronic

safety-related systems. Part 7. Techniques and measures


safety-related systems. Part 2. Requirements for systems


safety-related systems. Part 6. Guidelines on the application of GOST R IEC 61508-2-2007 and GOST R IEC

61508-3-2007


safety-related systems. Part 4. Terms and definitions


safety-related systems. Part 1. General requirements


safety-related systems. Part 3. Software requirements


safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels

GOST R IEC 60601-1-8-2007 Medical electrical equipment. Part 1-8. General requirements for safety.

General requirements, tests and guidance for alarm systems in medical electrical equipment and medical

electrical systems


Safety requirements for medical electrical systems

GOST R IEC 60204-1-2007 Safety of machinery. Electrical equipment of machines and mechanisms.

Part 1. General requirements

GOST R IEC 61650-2007 Reliability in techniques. Procedures for comparison of constant failure

rates and constant failure intensities

GOST R IEC 60950-21-2005 Information technology equipment. Safety requirements. Part 21. Remote

power feeding


2-14. Particular requirements for planers


Particular requirements for hammers and rotary hammers


Particular requirements for circular saws

GOST R IEC 60580-2006 Medical electrical equipment. Dose area product meters

GOST R IEC 61084-2-4-2007 Cable trunking and ducting systems for electrical installations. Part 2.

Particular requirements. Section 4. Service poles

GOST R IEC 61084-2-2-2007 Cable trunking and ducting systems for electrical installations. Part 2-2.

Particular requirements. Cable trunking systems and cable ducting systems intended for underfloor and

flushfloor installations

GOST R IEC 61084-2-1-2007 Cable trunking and ducting systems for electrical installations. Part 2.

Particular requirements. Section 1. Cable trunking and ducting systems intended for mounting on walls or

ceilings

GOST R IEC 61084-1-2007 Cable trunking and ducting systems for electrical installations. Part 1.



optical cables. Part 1-3. General application methods. Methods for determining the density. Water

absorption tests. Shrinkage test

GOST R IEC 60332-2-1-2007 Tests on electric and optical fibre cables under fire conditions. Part 2-1. Test

for vertical flame propagation for a single small insulated wire or cable. Apparatus


for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame


for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming

droplets/particles


for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame


for vertical flame propagation for a single insulated wire or cable. Apparatus

GOST R IEC 60331-31-2007 Tests for electric cables under fire conditions. Circuit integrity. Part 31.

Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV

GOST R IEC 60331-12-2007 Tests for electric cables under fire conditions. Circuit integrity. Part 12.

Apparatus. Fire with shock at a temperature of at least 830 °C

GOST R ISO/IEC 15459-4-2007 Automatic identification. International unique identifiers. Part 4. Unique

identifiers of individual items for supply chain management

GOST R ISO/IEC 15459-3-2007 Automatic identification. International unique identifiers. Part 3. Common

rules for unique identifiers

GOST R ISO/IEC 27001-2006 Information technology. Security techniques. Information security

management systems. Requirements

GOST R ISO/IEC 17030-2007 General requirements for third party marks of conformity

GOST R IEC 60269-4-1-2007 Low-voltage fuses. Part 4-1. Supplementary requirements for fuse-links for

the protection of semiconductor devices. Sections I to III. Examples of types of standardized fuse-links

GOST R IEC 60127-4-2007 Miniature fuses. Part 4. Universal modular fuse-links for through-hole and

surfase mount types

GOST R ISO/IEC 15434-2007 Automatic identification. Syntax for high-capacity automatic data capture

media




Classification of areas where combustible dusts are or may be present


Usability


Logical data structures

GOST R ISO/IEC 15457-3-2006 Identification cards. Thin flexible cards. Part 3. Test methods

GOST R ISO/IEC 15457-1-2006 Identification cards. Thin flexible cards. Part 1. Physical characteristics

GOST IEC 60641-2-2006 Pressboard and presspaper for electrical purposes. Part 2. Methods of tests

GOST R IEC 60297-3-103-2006 Mechanical structures for radio-electronic equipment. Keying and

alignment pin. Dimensions of mechanical structures of the 482,6 mm (19 in) series

GOST R IEC 60297-3-102-2006 Mechanical structures for radio-electronic equipment. Injector/extractor

handle. Dimensions of mechanical structures of the 482,6 mm (19 in) series

GOST R IEC 60297-3-101-2006 Mechanical structures for radio-electronic equipment. Subracks and

associated plug-in units. Dimensions of mechanical structures of the 482,6 mm (19 in) series


Particular requirements for drills and impact drill machines

GOST R ISO/IEC 7810-2006 Identification cards. Physical characteristics

GOST R ISO/IEC 7816-3-2006 Information technology. Identification cards. Integrated circuit(s) cards with

contacts. Part 3. Electronic signals and transmission protocols

GOST R ISO/IEC 10536-1-2006 Identification cards. Contactless integrated circuit(s) cards. Close-coupled

cards. Part 1. Physical characteristics


safety of high-voltage generators of diagnostic X-ray generators

GOST R IEC 61676-2006 Medical electrical equipment. Dosimetric instruments used for non-invasive

measurement of X-ray tube voltage in diagnostic radiology

GOST R IEC 62220-1-2006 Medical electrical equipment. Characteristics of digital X-ray imaging

devices. Part 1. Determination of the detective quantum efficiency

GOST R IEC 60601-2-2-2006 Medical electrical equipment. Part 2. Particular requirements for the safety

of high frequency surgical equipment

GOST R ISO/IEC TR 13335-5-2006 Information technology. Security techniques. Part 5. Management

quidance on network security

GOST R ISO/IEC 13335-1-2006 Information technology. Security techniques. Part 1. Concepts and models

for information and communications technology security management

GOST R IEC 60050-426-2006 International electrotechnical vocabulary. Chapter 426. Electric equipment

for explosive atmospheres

GOST R IEC 60898-2-2006 Circuit-breakers for overcurrent protection for household and similar

installations. Part 2. Circuit-breakers for a.c. and d.c. operation


Part 6. Iris image data

GOST R IEC 61675-3-2006 Radionuclide imaging devices. Characteristics and test conditions. Part 3.

Gamma camera based wholebody imaging systems


Positron emission tomographs


Single photon emission computed tomographs


Part 4. Finger image data

GOST R IEC 61160-2006 Risk management. Formal design review


optical cables. Part 1-2. Methods for general application. Thermal ageing methods

GOST R ISO/IEC 15288-2005 Information technology. System engineering. System life cycle processes

GOST R IEC 60050-195-2005 Earthing and protection against electric shock. Terms and definitions


optical cables. Part 4-2. Methods specific to polyethylene and polypropylene compounds. Tensile strength

and elongation at break after conditioning at elevated temperature. Wrapping test after conditioning at

elevated temperature. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term

stability test. Test method for copper-catalyzed oxidative degradation


optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral

oil immersion tests

GOST R IEC 61034-2-2005 Measurement of smoke density of cables burning under defined conditions.

Part 2. Test procedure and requirements

GOST R IEC 62086-2-2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance

trace heaters. Part 2. Application guide for design, installation and maintenance

GOST R IEC 61034-1-2005 Measurement of smoke density of cables burning under defined conditions.

Part 1. Test apparatus

GOST R IEC 60745-1-2005 Hand-held motor-operated electric tools. Safety and test methods. Part 1.


GOST R ISO/IEC 17799-2005 Information technology. Code of practice for information security

management


safety. Equipment for testing, measuring or monitoring of protective measures. Part 1. General

requirements

GOST R IEC 60870-5-103-2005 Telecontrol equipment and systems. Part 5. Transmission protocols. Section

103. Companion standard for the informative interface of protection equipment

GOST R IEC 61850-3-2005 Communication networks and systems in substations. Part 3. General

requirements

GOST R IEC 61010-031-2005 Safety requirements for electrical equipment for measurement, control and

laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement

and test

GOST R IEC 60870-5-101-2006 Telecontrol equipment and systems. Part 5. Transmission protocol. Section

101. Companion standard for basic telecontrol tasks

GOST IEC 60335-2-92-2004 Safety of household and similar electrical appliances. Part 2-92. Particular

requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators

GOST IEC 60335-2-94-2004 Safety of household and similar electrical appliances. Part 2-94. Particular

requirements for scissors type grass shears

GOST R IEC 62086-1-2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance

trace heaters. Part 1. General technical requirements and test methods

GOST ISO/IEC 16390-2005 Automatic identification. Bar coding. Symbology specifications. Interleaved

2 of 5

GOST R IEC 60519-1-2005 Safety in electroheat equipment. Part 1. General requirements

GOST R IEC 60252-1-2005 AC motor capacitors. Part 1. General. Performance, testing and rating.

Safety requirements. Guide for installation and operation

GOST R IEC 60127-1-2005 Miniature fuses. Part 1. Definitions for miniature fuses and general

requirements for miniature fuse-links


Part 2. Finger minutiae data

GOST R IEC 61048-2005 Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other

discharge lamp circuits. General and safety requirements


spread of vertically-mounted bunched wires or cables. Category A F/R

GOST R ISO/IEC 15423-2005 Automatic identification. Bar coding. General requirements for bar code

scanner and decoder performance testing

GOST R ISO/IEC 15419-2005 Automatic identification. Bar coding. Bar code digital imaging and printing

systems. General and performance requirements

GOST R IEC 60627-2005 Diagnostic Х-ray imaging equipment. Characteristics of general purpose and

mammographic anti-scatter grids


safety of X-ray equipment for computed tomography

GOST R IEC 60601-2-45-2005 Medical electrical equipment. Part 2-45. Particular requirements for safety

of mammographic X-ray equipmеnt and mammographic stereotactic devices

GOST R IEC 60974-1-2004 Arc welding power sources. Safety requirements

GOST R ISO/IEC 2382-23-2004 Information technology. Vocabulary. Part 23. Text processing

GOST R IEC 60384-14-2004 Fixed capacitors for use in electronic equipment. Part 14. Sectional

specification on fixed capacitors for electromagnetic interference suppression and connection to the supply

mains

GOST R IEC 60384-14-1-2004 Fixed capacitors for use in electronic equipment. Part 14-1. Blank detail

specification on fixed capacitors for electromagnetic interference suppression and connection to the supply

mains. Assessment level D

GOST R IEC 60269-3-1-2004 Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use

by unskilled persons (fuses mainly for household and similar applications). Sections I to IV

GOST R ISO/IEC 7816-4-2004 Information technology. Identification cards. Integrated circuit(s) cards with

contacts. Part 4. Interindustry commands for interchange

GOST R ISO/IEC 10536-3-2004 Identification cards. Contactless integrated circuit(s) cards. Part 3.

Electronic signals and reset procedures

GOST R IEC 61430-2004 Secondary cells and batteries. Test methods for checking the performance

of devices designed for reducing explosion hazards. Lead-acid starter batteries


electrolytes. Sealed nickel-metal hydride rechargeable single cells

GOST R IEC 61951-1-2004 Secondary cells and batteries containing alkaline or other non-acid

electrolytes. Portable sealed rechargeable single cells. Part 1. Nickel-cadmium


electrolytes. Safety requirements for portable sealed secondary cells, and batteries made from them, for

use in portable applications

GOST R ISO/IEC 15693-2-2004 Identification cards. Contactless integrated circuit(s) cards. Vicinity cards.

Part 2. Air interface and initialization

GOST R ISO/IEC 14443-1-2004 Identification cards. Contactless integrated circuit(s) cards. Proximity cards.

Part 1. Physical characteristics

GOST R ISO/IEC 15693-1-2004 Identification cards. Contactless integrated circuit(s) cards. Vicinity cards.

Part 1. Physical characteristics

GOST R ISO/IEC 10536-2-2004 Identification cards. Contactless integrated circuit(s) cards. Part 2.

Dimensions and location of coupling areas


Electronic signals and answer to reset for synchronous cards

GOST R IEC 60870-5-104-2004 Telecontrol equipment and systems. Part 5. Transmission protocols. Section

104. Network access for IEC 60870-5-101 using standard transport profiles

GOST R ISO/IEC 10746-1-2004 Information technology. Open distributed processing. Reference model.

Part 1. Overview

GOST R ISO/IEC 10746-4-2004 Information technology. Open distributed processing. Reference model.

Part 4. Architectural semantics

GOST R IEC 61429-2004 Мarking of secondary cells and batteries with the international recycling

symbol ISO 7000-1135

GOST R ISO/IEC 10165-6-2003 Information technology. Open systems interconnection. Structure of

management information. Part 6. Requirements and guidelines for implementation conformance statement

proformas associated with OSI management


management information. Part 7. General relationship model


management information. Part 5. General management information


Optical properties and characteristics


Interindustry data elements

GOST R IEC 60384-1-2003 Fixed capacitors for use in electronic equipment. Part 1. General

specifications

GOST R IEC 60118-14-2003 Programmable hearing aids. Specification of a digital interface devices.

Dimensions of electrical connectors

GOST R ISO/IEC 8825-2-2003 Information technology. ASN.1 encoding rules. Part 2. Specification of

packed encoding rules (PER)

GOST R ISO/IEC 8825-1-2003 Information technology. ASN.1 encoding rules. Part 1. Specification of basic

encoding rules (BER), canonical encoding rules (СER) and distinguished encoding rules (DER)

GOST IEC 60554-3-1-2002 Cellulosic papers for electrical purposes. Technical requirements. Part 3.

General technical requirements for individual materials. Sheet 1. General purpose electrical papers

GOST R IEC 60695-1-1-2003 Fire hazard testing. Part 1-1. Guidance for assessing the fire hazard of

electrotechnical products. General guidelines

GOST R IEC 60331-11-2003 Tests for electric and optical fibre cables under fire conditions. Circuit

integrity. Part 11. Apparatus. Fire alone at a flame temperature of at least 750 °C


integrity. Part 21. Procedures and requirements. Cables of rated voltage up to and including 0,6/1,0 kV


integrity. Part 23. Procedures and requirements. Electric data cables


integrity. Part 25. Procedures and requirements. Optical fibre cables

GOST R IEC 60598-1-2003 Luminaires. Part 1. General requirements and test methods

GOST R ISO/IEC 8824-4-2003 Information technology. Abstract syntax notation one (ASN.1). Part 4.

Parameterization of ASN.1 specifications

GOST R IEC 60715-2003 Low-voltage switchgear and controlgear. Mounting on rails for mechanical

support of electrical devices in switchgear and controlgear installations

GOST R IEC 60285-2002 Alcaline secondary cells and batteries. Sealed nickel-cadmium cylindrical

single cells

GOST R IEC 60509-2002 Alcaline secondary cells and batteries. Sealed nickel-cadmium button

rechargeable single cells

GOST R ISO/IEC 8824-3-2002 Information technology. Abstract syntax notation one (ASN.1). Part 3.

Constraint specification

GOST R ISO/IEC 50-2002 Child safety and standards. General requirements

GOST R ISO/IEC 15910-2002 Information technology. Software user documentation process

GOST R ISO/IEC 14764-2002 Information technology. Software maintenance

GOST R ISO/IEC 37-2002 Products of consumer interest. Instructions for use. General requirements

GOST R ISO/IEC 15426-1-2002 Automatic identification. Bar coding. Linear bar code symbols verifier.

Conformity requirements

GOST R ISO/IEC 15026-2002 Information technology. System and software integrity levels

GOST R ISO/IEC TR 12182-2002 Information technology. Categorization of software

GOST R ISO/IEC TR 16326-2002 Software engineering. Guide for the application of GOST R ISO/IEC 12207 to

project management

GOST R ISO/IEC TR 15271-2002 Information technology. Guide for the application of GOST R ISO/IEC 12207

(Software life cycle processes)

GOST R ISO/IEC 7811-2-2002 Identification cards. Recording technique. Part 2. Magnetic stripe of low

coercivity

GOST R IEC 60950-2002 Safety of information technology equipment

GOST R IEC 893-3-2-2002 Industrial rigid laminated sheets. Requirements for rigid laminated sheets

based on epoxide resins. Specifications

GOST R IEC 61037-2001 Electricity metering. Tariff and load control. Particular requirements for

electronic ripple control receivers

GOST R IEC 61107-2001 Data exchange for meter reading, tariff and load control. Direct local data

exchange

GOST R IEC 61038-2001 Electricity metering. Tariff and load control. Particular requirements for

time switches

GOST R IEC 61142-2001 Data exchange for meter reading, tariff and load control. Local bus data

exchange


Constancy tests. Equipment for indirect radioscopy and indirect radiography


Imaging performance of dental X-ray equipment. Acceptance tests

GOST R IEC 60851-1-2002 Winding wires. Test methods. Part 1. General

GOST R IEC 60851-6-2002 Winding wires. Test methods. Part 6. Thermal properties

GOST R IEC 60851-2-2002 Winding wires. Test methods. Part 2. Determination of dimensions

GOST R IEC 60851-3-2002 Winding wires. Test methods. Part 3. Mechanical properties


Constancy tests. Equipment for intra-oral dental radiography


Constancy tests. X-ray equipment for mammography


Constancy tests. Equipment for general direct radiography

GOST R IEC 60526-2001 High-voltage cable plug and socket connections for medical X-ray

equipment


Imaging performance of X-ray equipment for radiographic and radioscopic systems. Acceptance tests

GOST R IEC 61953-2001 Diagnostic X-ray imaging equipment. Characteristics of mammographic

anti-scatter grids

GOST R IEC 61859-2001 Radiotherapy treatment rooms. General safety requirements


Constancy tests. X-ray equipment for computed tomography

GOST R IEC 60245-2-2002 Rubber insulated cables of rated voltages up to and including 450/750 V.

Test methods

GOST R IEC 60799-2002 Electrical accessories. Cord sets and interconnection cord sets


450/750 V. Sheathed cables for fixed wiring


450/750 V. Non-sheathed cables for fixed wiring

GOST R IEC 60536-2-2001 Classification of electrical and electronic equipment with regard to

protection against electric shock. Part 2. Guidelines to requirements for protection against electric shock


requirements for electric fence energizers and test methods

GOST R ISO/IEC 10746-3-2001 Information technology. Open Systems Interconnection. Data control and

Open Distributed Processing. Reference model. Part 3. Architecture

GOST R ISO/IEC 10166-1-2001 Information technology. Text and office systems. Document Filing and

Retrieval (DFR). Part 1. Abstract service definition and procedures

GOST R IEC 60522-2001 X-ray tube assemblies. Methods for determination of the permanent

filtration

GOST R IEC 61267-2001 Medical diagnostic X-ray equipment. Radiation conditions for use in the

determination of characteristics

GOST R IEC 60731-2001 Medical electrical equipment. Dosimeters with ionization chambers in

radiotherapy


requirements for humidifiers intended for use with heaters, ventilators and air-conditioning systems and

test methods


requirements for sauna heating appliances and test methods


Imaging performance of X-ray equipment for digital subtraction angiography (DSA). Acceptance tests


Constancy tests. Film processors


Imaging performance of mammographic X-ray equipment. Acceptance tests


Сonstancy tests. Hard copy cameras


Сonstancy tests. Radiographic cassettes and film changers. Film-screen contact and relative sensitivity of the

screen-cassette assembly


management information. Management information model


management information. Guidelines for the definition of managed objects

GOST R ISO/IEC 8824-2-2001 Information technology. Abstract syntax notation one (ASN.1). Information

object specification


management information. Definition of management information


requirements for outdoor barbecues and test methods

GOST R IEC 61094-2-2001 State system for ensuring the uniformity of measurements. Measurement

microphones. Primary method for pressure calibration of laboratory standard microphones by the

reciprocity technique

GOST R IEC 61094-3-2001 State system for ensuring the uniformity of measurements. Measurement

microphones. Primary method for free-field calibration of laboratory standard microphones by the

reciprocity technique

GOST R IEC 60870-2-2-2001 Telecontrol equipment and systems. Part 2. Operating conditions. Section 2.

Environmental conditions (climatic, mechanical and other non-electrical influences)

GOST R IEC 60711-2001 Occluded-ear simulator. Technical requirements and test methods

GOST R IEC 60601-2-13-2001 Medical electrical equipment. Part 2. Particular requirements for the safety

of anaesthetic workstations

GOST R IEC 748-11-1-2001 Semiconductor devices integrated circuits. Part 11. Section 1. Internal visual

examination for semiconductor integrated circuits excluding hybrid circuits

GOST R IEC 870-5-102-2001 Telecontrol equipment and systems. Part 5. Transmission protocol. Section

102. Companion standard for the transmission of integrated totals in electric power systems

GOST R ISO/IEC 10166-2-2001 Information technology. Text and office systems. Document filing and

retrieval (DFR). Part 2. Protocol specification

GOST R ISO/IEC 10746-2-2000 Information technology. Open distributed processing. Part 2. Reference

model

GOST R IEC 61140-2000 Protection against electric shock. Common aspects for installation and

equipment

GOST R ISO/IEC 10031-2-2000 Information technology. Text and office systems.

Distributed-office-applications model. Part 2. Distinguished-object-reference and associated procedures

GOST R IEC 60447-2000 Man-machine interface. Actuating principles

GOST R IEC 60073-2000 Basic and safety principles for man-machine interfase, marking and

identification. Coding principles for indication devices and actuators

GOST R ISO/IEC 10031-1-2000 Information technology - Text and office systems -

Distributed-office-applications model - Part 1^ General model

GOST R ISO/IEC 10740-2-2000 Information technology. Text and office systems. Referenced Dana Transfer.

Part 2. Protocol specification

GOST R ISO/IEC 12119-2000 Information technology. Software packages. Quality requirements and

testing

GOST R IEC 61293-2000 Electrical equipment. Marking of electrical equipment with ratings related

to electrical supply. Safety requirements

GOST R IEC 61032-2000 Protection of persons and equipment by enclosures. Probes for verification

GOST R IEC 61217-99 Radiotherapy equipment. Coordinates, movements and scales

GOST R IEC 60613-99 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for

medical diagnisis

GOST R ISO/IEC 65-2000 General requirements for bodies operating product certification systems

GOST R IEC 61168-99 Radiotherapy simulators (imitators). Functional performance characteristics

GOST R IEC 61170-99 Radiotherapy simulators (imitators). Guidelines for functional performance

characteristics

GOST R IEC 61262.7-99 Medical electrical equipment. Characteristics of electro-optical X-ray image

intensifiers. Part 7. Determination of modulation transfer function

GOST R IEC 61058.1-2000 Switches for electrical appliances. Part 1. General requirements and test

methods

GOST R IEC 61303-99 Medical electrical equipment. Radionuclide calibrators. Particular methods for

describing performance

GOST R ISO/IEC TR 10183-1-2000 Information technology. Text and office systems. Office Document

Architecture (ODA) and interchange format. Technical Report on ISO 8613 implementation testing. Part 1.

Testing methodology

GOST R ISO/IEC TR 10735-2000 Information technology. Telecommunications and information exchange

between systems. Standard group MAC addresses

GOST R IEC 821-2000 IEC 821 VME bus. Microprocessor system bus for 1 byte to 4 byte data


requirements for oral hygiene appliances and test methods


requirements for electrical appliances for use with aquaria and garden ponds and test methods


intensifiers. Part 5. Determination of the detective quantum efficiency


intensifiers. Part 6. Determination of the contrast ratio and veiling glare index


intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity

GOST R IEC 61262.1-99 Medical electrical eguipment. Characteristics of electro-optikal X-ray image

intensifiers. Part 1. Determination of the entrance field size

GOST R IEC 60976-99 Medical electrical equipment. Medical electron accelerators. Functional

characteristics

GOST R IEC 1029-2-8-2000 Electric transportable tools. Particular safety requirements and methods of

testing single spindle vertical moulders

GOST R IEC 870-6-2-2000 Telecontrol equipment and systems. Part 6. Telecontrol protocols

compatible with ISO standards and ITU-T recommendations Section 2. Use of basic standards (OSI layers

1-4)

GOST R IEC 61241-1-2-99 Electrical apparatus for use in the presence of combustible dust. Past 1:2.

Electrical apparatus protected by enclosures and surface temperature limitation. Selection, installation and

maintenance

GOST R IEC 61210-99 Connecting devices. Flat quick-connect terminations for electrical copper

conductors. Safety requirements

GOST R ISO/IEC TR 10000-3-99 Information technology. Framework and taxonomy of International

Standardized Profiles. Part 3. Principles and taxonomy for open system environment profiles


Standardized Profiles. Part 2. Principles and taxonomy for OSI profiles


Standardized Profiles. Part 1. General principles and documentation framework


Classification of areas

GOST R IEC 61241-2-3-99 Electrical apparatus for use in the presence of combustible dust. Part 2. Test

methods. Section 3. Method for determining minimum ignition energy of dust/air mixtures


methods. Section 2. Method for determining the electrical resistivity of dust in layers


methods. Section 1. Methods for determining the minimum ignition temperatures of dust

GOST R IEC 61010-2-061-99 Safety requirements for electrical equipment for measurement, control and

laboratory use. Part 2-061. Particular requirements for laboratory atomic spectrometers with thermal

atomization and ionization

GOST R IEC 61010-2-010-99 Safety requirements for electrical equipment for measurement, control,

and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of

materials


laboratory use. Part 2-051. Particular requirements for laboratory equipment for mixing and stirring


laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test


requirements for pedestrian controlled mains-operated lawnmowers and test methods


laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

GOST R IEC 60896-2-99 Stationary lead-acid batteries. General requirements and methods of test.

Part 2. Valve regulated types

GOST R IEC 61056-2-99 Portable lead-acid cells and batteries (valve-regulated types). Part 2.

Dimensions, terminals and marking

GOST R IEC 61056-1-99 Portable lead-acid cells and batteries (valve-regulated types). Part 1.

General requirements, functional characteristics. Methods of test

GOST R IEC 61056-3-99 Portable lead-acid cells and batteries (valve-regulated types). Part 3. Safety

recommendations for use in electric appliances


laboratory use. Part 2-041. Particular requirements for autoclaves using steam for the treatment of medical

materials and for laboratory processes

GOST R IEC 60754-1-99 Tests of materials from cables during combustion. Determination of the

amount of evolved halogen acid gas

GOST R IEC 60754-2-99 Tests of materials from cables during combustion. Determination of degree

of evolved gases by measuring pH and conductivity

GOST R IEC 62127-3-2010 State system for ensuring the uniformity of measurements. Hydrophones.

General requirements to properties for measurements of ultrasonic fields in the frequency range up to 40

MHz

GOST ISO/IEC 15426-1-2003 Automatic identification. Bar coding. Linear bar code symbols verifier.

Conformity requirements


reguirements for fixed immersion heaters and test methods

GOST R IEC 60065-2002 Audio-, video- and similar electronic apparatus. Safety requirements

GOST R ISO/IEC 8824-1-2001 Information technology. Abstract Syntax Notation One (ASN.1).

Specification of basic notation

GOST R ISO/IEC 10740-1-2000 Information technology. Text and office systems. Referenced Dana Transfer.

Part 1: Abstract service definition

GOST R IEC 61241-1-1-99 Electrical apparatus for use in the presence of combustible dust. Part 1-1.

Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus

GOST R IEC 60901-99 Single-capped fluorescent lamps. Performance specifications

GOST R IEC 793-1-93 Optical fibres. General speсifications

GOST R ISO/IEC 9594-3-98 Information technology. Open Systems Interconnection. The directory. Part

3. Abstract service definition

GOST IEC 730-1-95 Automatic electrical controls for household and similar use. General requirements

and test methods

GOST R IEC 870-4-93 Telecontrol equipment and systems. Part 4. Performance requirements

GOST R IEC 60238-99 Edison screw lampholders

GOST R IEC 60081-99 Double-capped fluorescent lamps. Performance specifications

GOST R IEC 61184-99 Bayonet lampholders

GOST R IEC 60173-99 Colours of the cores of flexible cables and cords


requirements for clocks

GOST R IEC 60155-99 Glow-starters for fluorescent lamps

GOST R IEC 878-95 Graphical symbols electrical equipment in medical practice

GOST R IEC 60227-2-99 Polyvinylchloride insulated cables of rated voltages up to and including

450/750 V. Part 2. Test methods

GOST R IEC 870-3-93 Telecontrol equipment and system. Part 3. Interfaces (electrical characteristics)

GOST R ISO/IEC 10021-1-98 Information technology. Text communication. Message-oriented text

interchange systems (MOTIS). Part 1. System and service overview


interchange systems (MOTIS). Part 3. Abstract service definition conventions


5. Protocol specifications

GOST R IEC 598-2-10-98 Luminaries. Part 2. Particular requirements. Section 10. Portable child

appealing luminaires

GOST R IEC 598-2-20-97 Luminaires. Part 2. Particular requirements. Section 20. Lighting chains

GOST R IEC 598-2-1-97 Luminaires. Part 2. Particular requirements. Section 1. Fixed general-purpose

luminaires

GOST IEC 730-2-1-95 Automatic electrical controls for household and similar use. Particular requirements

for electrical controls for electrical household appliances and test methods

GOST R IEC 60245-7-97 Rubber insulated cables of rated voltages to 450/750 V including.

Heat-resistant ethylene-vinyl acetate rubber insulated cables

GOST R IEC 60245-6-97 Rubber insulated cables of rated voltages to 450/750 V including. Arc

welding electrode cables

GOST R IEC 245-5-97 Rubber insulated cables of rated voltages to 450/750 V including. Lift cables

GOST R IEC 60245-3-97 Rubber insulated cables of rated voltages to 450/750 V including. Heat

resistant silicone insulated cables

GOST R IEC 773-96 Brushes for electrical machines. Test methods and apparatus for the measurement

of the operational characteristics


band saws tests

GOST R ISO/IEC 8631-94 Information technology. Program constructs and conventions for their

representation

GOST R IEC 870-1-1-93 Telecontrol equipment and systems. Part 1. General considerations. Section One -

General prinсiples

GOST R IEC 952-1-93 Aircraft battaries. Part 1. General test requirements and performance levels

GOST R IEC 794-1-93 Optical fibre cables. General specifications

GOST R IEC 60598-2-22-99 Luminaries. Part 2-22. Particular requirements. Luminaries for emergency

lighting

GOST R IEC 60400-99 Lampholders for tubular fluorescent lamps and starterholders

GOST R IEC 60598-2-5-99 Luminaries. Part 2. Particular requirements. Section 5. Floodlights


requirements for projectors and similar appliances

GOST R IEC 60598-2-3-99 Luminaires. Part 2. Particular requirements. Section 3. Luminaires for street

and road lighting

GOST R IEC 60598-2-2-99 Luminaires. Part 2. Particular requirements. Section 2. Recessed luminaires

GOST R IEC 60598-2-4-99 Luminaires. Part 2. Particular requirements. Section 4. Portable

gengral-purpose luminaires

GOST R IEC 61199-99 Single - capped fluorescent lamps. Safety specifications

GOST R IEC 60719-99 Calculation of the lower and upper limits for the average outer dimensions of cables

with circular coper conductors and of rated voltages up to and including 450/750 V

GOST R IEC 870-1-2-95 Telecontrol equipment and systems. Part 1. General considerations. Section 2.

Guide for specifications


450/750 V. Part 7. Screened and unscreened flexible cables with two or more conductors

GOST R IEC 60811-3-1-94 Test methods specific to PVC insulating and sheathing compaunds of

electric and optical cables. Pressure test at high temperature. Test for resistance to cracking

GOST R IEC 598-2-9-98 Luminaires. Part 2. Particular requirements. Section 9. Photo and film luminaires

(non-professional)

GOST R ISO/IEC 9594-6-98 Information technology. Open systems Interconnection. The directory. Part

6. Selected attribute types

GOST R ISO/IEC 8881-98 Information processing system. Data communication. Use of the X.25

packet level protocol in local area networks

GOST R ISO/IEC 9067-98 Information technology. Data communication. Automatic fault isolation

procedures using test loops

GOST R IEC 929-98 Auxiliaries for lamps. A.c.-Supplied electronic ballasts for tubular fluorescent lamps.

Performance requirements

GOST R IEC 870-1-4-98 Telecontrol equipment and systems. Part 1. General considerations. Section 4. Basic

aspects of telecontrol data transmission and organization of standards IEC 870-5 and IEC 870-6

GOST R IEC 925-98 D.c. supplied electronic ballasts for tubular fluorescent lamps. Performance

requirements

GOST R IEC 927-98 Auxiliaries for lamps. Starting devices (other than glow starters). Performance

requirements

GOST R IEC 60598-2-18-98 Luminaires. Part 2. Particular requirements. Section 18. Luminaires for

swimming pools and similar applications

GOST R IEC 60598-2-23-98 Luminaires. Part 2. Particular requirements. Section 23. Extra low voltage

lighting systems for filament lamps

GOST R IEC 598-2-6-98 Luminaries. Part 2. Particular requirements. Section 6. Luminaries with built-in

transformers for filament lamps

GOST R IEC 598-2-7-98 Luminaries. Part 2. Particular requirements. Section 7. Portable luminaries for

garden use

GOST R IEC 60922-98 Auxiliaries for lamps-ballasts for discharge lamps (excluding tubular fluorescent

lamps) - general and safety requirements

GOST R IEC 598-2-19-97 Luminaires. Part 2. Particular requirements. Section 19. Air-handling

luminaires. Safety requirements

GOST R IEC 598-2-17-97 Luminaires. Part 2. Particular requirements. Section 17. Luminaires for

indoor and outdoor lighting of stages, television, film and photographic studios

GOST R IEC 86-2-96 Primary batteries. Part 2. Specification sheets

GOST R IEC 1007-96 Transformers and inductors for use in electronic and telecommuncation equipment.

Measuring methods and test procedures

GOST R IEC 449-96 Electrical installations of buildings. Voltage bands


diamond drills with water supply tests

GOST R ISO/IEC 10729-2-99 Information technology. Open systems interconnection. Conformance test

suite for the presentation layer. Part 2. Test suite structure and test purposes for the ASN.1 basic encodings

GOST R ISO/IEC 7498-1-99 Information technology. Open systems interconnection. Basic reference

model. Part 1. The basic model

GOST R IEC 60811-1-1-98 General test methods for insulating and sheathing materials of electric and

optical cables. Measurements of thickness and overall dimensions. Tests for determining the mechanical

properties

GOST R IEC 1029-2-3-96 Electric transportable tools. Particular safety requirements and test

methods of planers and thicknessers

GOST R ISO/IEC TR 10023-93 Information technology. Telecommunications and Information exchange.

Between systems. Formal description of 8072 in LOTOS

GOST R ISO/IEC 9066-1-93 Information processing systems. Text communication. Reliable transfer.

Part 1. Model and service definition

GOST R IEC 1066-93 Thermoluminescene dosimetry systems for personal and environmental

monitoring. General technical requirements and test methods

GOST R IEC 60811-3-2-94 Methods specific to PVC compaunds of insulating and sheathing materials

of electric cables. Loss of mass test. Thermal stability test

GOST R ISO/IEC 9549-93 Information technology. Galvanic isolation of balanced interchange circuits

GOST R IEC 896-1-95 Stationary lead-acid batteries. General requirements and methods of test. Part 1.

Vented types

GOST R ISO/IEC 6937-93 Information technology. Coded graphic character set for text

communication. Latin alphabet

GOST R ISO/IEC ISP 10607-1-94 Information technology. International standardized profiles AFTnn. File

transfer, access and management. Part 1. Specification of ACSE, presentation and session protocols for use

by FTAM

GOST R IEC 952-2-93 Aircraft battaries. Part 2. Design and construction requirements

GOST R IEC 1029-2-4-96 Electric transportable tools. Particular safety requirements and test

methods of bench grinders

GOST R IEC 1029-2-1-95 Electrical transportable tools. Specific safety requirements and methods of

circular saws testing

GOST R ISO/IEC 10038-99 Information technology. Telecommunications and information exchange

between systems. Local area networks. Media access control (MAC) bridges

GOST R IEC 60570-2-1-99 Electrical supply track systems for lum inaires. Part 2. Mixed supply systems.

Section 1. Classes I and III

GOST R IEC 60598-2-24-99 Luminaries. Part 2-24. Particular requirements. Luminaries with limited

surface temperatures

GOST R ISO/IEC 10164-2-99 Information technology. Open systems interconnection. Systems

management. State management function

GOST R ISO/IEC 10164-1-99 Information technology. Open systems interconnection. Systems

management. Object management function

GOST R ISO/IEC ISP 11185-10-99 Information technology. International Standardized. Profiles

FVT2nn. Virtual Terminal Basic Class. Register of control object type definitions. Part 10. FVT231. Forms

FEPCO (Field Entry Pilot Control Object) No.1

GOST R IEC 61195-99 Double-capped fluorescent lamps. Safety specifications

GOST R ISO/IEC 7498-4-99 Information technology. Open systems interconnection. Basic reference

model. Part 4. Management framework

GOST R IEC 870-5-3-95 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 3.

General structure of application data


Transmission frame formats

GOST R IEC 1029-2-2-95 Electrical transportable tools. Particular safety requirements and methods

of radial arm saws


transfer access and management. Part 2. Definition of document types, constraint sets and syntaxes

GOST R ISO/IEC ISP 10613-1-98 Information technology. International Standardized profile RA. Relaying the

connectionless-mode network service. Part 1. Relay function general overview and

subnetwork-independent requirements

GOST R IEC 1047-98 Auxiliaries for lamps. d.c. or a.c. supplied electronic step-down converters for

filament lamps. Performance requirements

GOST R ISO/IEC 9594-7-98 Information technology. Open systems interconnection. The directory. Part

7. Selected object classes


between systems. 34-pole DTE/DCE interface connector. Mateability dimension and contact number

assignments


between systems. The structure and coding of logical link control addresses in local area networks

GOST R IEC 924-98 D.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety

requirements

GOST R IEC 870-6-1-98 Telecontrol equipment and systems. Part 6. Telecontrol protocols compatible with

ISO standards and ITU-T recommendations. Section 1. Application context and organization of standards

GOST R IEC 923-98 Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent

lamps). Performance requirements


interchange systems (MOTIS). Part 7. Interpersonal messaging system

GOST R IEC 811-5-1-95 Test methods specific to filling compounds of electric cables. Drop-point. Separation

of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at

temperature 23 °C. D.c. resistivity at temperature 23 °C and 100 °C

GOST R IEC 598-2-8-97 Luminaires. Part 2. Particular requirements. Section 8. Hand lamps


diamond saws with water supply tests

GOST R IEC 141-1-96 Tests on oil-filled paper-insulated metal-sheathed cables and accessories for

alternating voltages up to and including 400 kV

GOST R IEC 906-3-96 IEC System of plugs and socket-outlets for household and similar purposes.

Particular requirements for SELV plugs and sockets 6, 12, 24, 48 V, a. c. and d. c., 16 A. Technical

requirements


between systems. Provision of the connection-mode Network internal layer service by intermediate systems

using ISO/IEC 8208, the X.25 packet layer protocol

GOST R ISO/IEC ISP 11185-9-99 Information technology. International standardized. Profiles FVT2nn. Virtual

terminal basic class. Register of control object type definitions. Part 9. FVT222 - Paged FEICO ( Field entry

instruction control object) No.1


testing mitre saws

GOST R ISO/IEC 9066-2-93 Information processing systems. Text communication. Reliable transfer.


GOST R IEC 371-3-1-93 Insulating mica materials for commutator separators. Specifications

GOST R ISO/IEC 8825-93 Information technology. Open Systems Interconneсtion. Specification of

Basic Encoding Rules for Abstract Syntax Notation One (ASN.1)

GOST R ISO/IEC 10027-93 Information technology. Information resource dictionary system (IRDS)

framework

GOST R IEC 870-5-2-95 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 2. Link

transmission procedures

GOST R IEC 1020-5-1-94 Electromechanical switches for use in electronic equipment. Blank detail

specification for pushbutton switches

GOST R ISO/IEC 9646-4-93 Information technology. Open systems interconnection. Conformance

testing methodology and framewark. Part 4. Test realization


suite for the ACSE protocol. Part 1. Test suit structure and test purposes

GOST R IEC 60570-99 Electrical supply track systems for luminaires

GOST R ISO/IEC ISP 11185-11-99 Information technology. International Standardized Profiles

FVT2nn. Virtual Terminal Basic Class. Register of control object type definitions. Part 11. FVT232. Paged

FEPCO (Field Entry Pilot Control Object) No.1

GOST R IEC 61050-99 Transformers for tubular discharge lamps having a no-load output voltage

exceeding 1000 V (generally called neon-transformers). General and safety requirements


between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at

reference points S and T

GOST R IEC 1020-6-1-94 Electromechanical switches for use in electronic equipment. Blаnk detail

specification for sensitive switches

GOST R IEC 928-98 Auxiliaries for lamps. A.c.-supplied electronic ballasts for tubular fluorescent lamps.

General and safety requirements

GOST R ISO/IEC 9072-2-93 Information processing systems. Text communication. Remote operations.


GOST R IEC 730-2-10-96 Automatic electrical controls for household and similar use. Particular

requirements for electrically operated motor starting relays test methods

GOST R ISO/IEC ISP 10611-2-95 Information technology. International standardized profiles AMH1n.

Message handling systems. Common messaging. Part 2. Specification of ROSE, RTSE, ACSE, presentation and

session protocols for use by MHS

GOST R ISO/IEC ISP 10609-11-98 Information technology. International Standardized Profiles TB, TC,

TD and TE. Connection-mode Transport Service over connection-mode Network Service. Part 11. CSMA/CD

subnetwork-dependent, media-dependent requirements

GOST R ISO/IEC ISP 10609-10-98 Information technology. International standardized. profiles TB, TC,

TD and TE. Connection-mode transport service over connection-mode network service. Part 10. LAN

subnetwork-dependent, media-independent requirements

GOST R ISO/IEC ISP 10613-8-98 Information technology. International standardized Profile RA. Relaying the

connectionless-mode network service. Part 8. Profile RA51.1111

GOST R ISO/IEC ISP 10613-5-98 Information technology. International standardized profile RA. Relaying the

connectionless-mode network service. Part 5. Definition of profile RA51.51, relaying the

connectionless-mode network service between CSMA/CD LAN subnetworks


interchange systems (MOTIS). Part 2. Overall architecture


requirements for milking machines and test methods

GOST R ISO/IEC 9594-8-98 Information technology. Open systems interconnection. The directory. Part

8. Authentication framework


1. Overview of concepts, models and services

GOST R ISO/IEC TR 10171-98 Information technology. Telecommunication and information exchange

between system. List of standard data link layer protocols that utilize high-level data link control (HDLC)

classes of procedures and list of standardized XID format identifiers and private parameter set identification

values

GOST R IEC 926-98 Auxiliaries for lamps. Starting devices (other than glow starters). General and safety

requirements

GOST R IEC 598-2-25-98 Luminaires. Part 2. Particular requirements. Section 25. Luminaries for use

in clinical areas of hospitals and health care buildings


interchange systems (MOTIS). Part 6. Protocol specifications

GOST R IEC 921-97 Ballasts for tubular fluorescent lamps. Performance requirements

GOST R IEC 998-2-4-96 Connecting devices for low-voltage circuis for household and similar purposes.

Particular requirements for twist-on connecting devices

GOST R ISO/IEC 8072-96 Information technology. Open Systems Interconnection. Transport service

definition


interchange systems (MOTIS). Part 5. Message store. Abstract service definition


suite for the presentation layer. Part 1. Test suite structure and test purposes for the presentation protocol

GOST R IEC 127-6-99 Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links


between systems. High-level data link control (HDLC) procedures. Frame structure

GOST R ISO/IEC 10116-93 Information technology. Modes of operation for an n-bit block cipher

algorithm

GOST R IEC 958-93 Digital audio interface

GOST R IEC 1020-3-1-94 Electromechanical switches for use in electronic equipment. Blank detail

specification for in-line package switches

GOST R IEC 60432-2-99 Safety specifications for incandescent lamps. Part 2. Tungsten halogen

lamps for domestic and similar general lighting purposes


between systems. Network/ transport protocol interworking specification

GOST R ISO/IEC 10732-99 Information technology. Use of X. 25 packet layer protocol to provide the

OSI connection-mode Network Service over the telephone network

GOST R ISO/IEC 8831-99 Information technology. Open systems interconnection. Job transfer and

manipulation concepts and services

GOST R ISO/IEC 10588-99 Information technology. Use of X.25 packet layer protocol in conjunction

with X.21/X.21bis to provide the OSI connection-mode Network Service

GOST R ISO/IEC 9595-99 Information technology. Open systems interconnection.Common

management information service definition

GOST R ISO/IEC TR 9294-93 Information technology. Guidelines for the management of software

documentation

GOST R ISO/IEC 9072-1-93 Information processing systems. Text communication. Remote operations.

Part 1. Model, notation and service definition

GOST R ISO/IEC 10857-95 Information technology. Microprocessor systems. Futurebus+. Logical

protocol specification

GOST R IEC 536-94 Classification of electrical and electronic equipment with regard to protection

against electric shock

GOST R IEC 491-95 Safety requirements for electronic flash apparatus for photographic purposes

GOST R ISO/IEC ISP 10608-2-95 Information technology. International standardized profile TAnnnn.

Connection-mode transport service over connectionless-mode network service. Part 2. TA51 profile

including subnetwork-dependent requirements for CSMA/CD local area networks (LAN)


between systems. Provision of the OSI connection-mode network service by packet mode terminal

equipment connected to an integrated services digital network (ISDN)

GOST R ISO/IEC ISP 10609-5-95 Information technology. International standardized. Profiles TB, TC, TD and

TE. Connection-mode transport service over connection-mode network service. Part 5. Definition of profiles

TB1111/TB1121


Message handling systems. Common messaging. Part 4. AMH12-MTS access (P3)


requirements for electrical heating appliances for breeding and rearing animals and test methods

GOST R ISO/IEC ISP 10609-12-98 Information technology. International standardized. Profiles TB, TC,

TD and TE. Connection-mode transport service over connection-mode network service. Part 12. Definition

of profile TC51, provision of the OSI connection-mode transport service using the OSI connection-mode

network service in an end-system attached to a CSMA/CD LAN

GOST R ISO/IEC ISP 10613-9-98 Information on technology. International stanlardized profile RA. Relaying

the connectionless-mode network service. Part 9. Definition of profile RA51.1121, relaying the

connectionless-mode network between CSMA/CD LAN subnetworks and PSDNs virtual calls over a digital

data circuit/CSDN leased line permanent access

GOST R ISO/IEC ISP 10613-7-98 Information technology. International standardized. Profile RA. Relaying the

connectionless-mode network service. Part 7. PSDN subnetwork-dependent, media-dependent

requirements for virtual calls over a permanent access


connectionless-mode network service. Part 3. CSMA/CD LAN subnetwork-dependent, media-dependent

requirements


connectionless-mode network service. Part 2. LAN subnetwork-dependent media-independent

requirements

GOST R IEC 1046-98 Auxiliaries for lamps. D.c. or a.c. supplied electronic step-down converters for

filament lamps. General and safety requirements


between systems. Start-stop transmission signal quality at DTE/DCE interfaces

GOST R ISO/IEC ISP 10611-5-98 Information technology. International standard. Profiles AMH1n. Message

handling system. Common messaging. Part 5. Profile AMH13. MS access (P7)

GOST R IEC 920-97 Ballasts for tubular fluorescent lamps. General and safety requirements

GOST R IEC 332-2-96 Tests on cables under fire conditions. Test on a single small vertical insulated

copper wire or cable


between systems. End system routeing information exchange protocol for use in conjunction with ISO 8878


between systems. Definition of the relaying functions of a Network layer intermediate system



TE1111/TE1121



TC1111/TC1121



TD1111/TD1121

GOST R ISO/IEC 9126-93 Information technology. Software product evaluation. Quality

characteristics and guidelines for their use

GOST R ISO/IEC 9075-93 Information processing systems. Database language SQL with Integrity

Enhancement

GOST R ISO/IEC ISP 10609-14-98 Information technology. International standardized. Profiles TB, TC,

TD and TE. Connection-mode transport service over connection-mode network service. Part 14. Definition

of profile TC53, provision of the OSI connection-mode transport service using the OSI connection-mode

network service in an end system attached to a token ring LAN

GOST R ISO/IEC ISP 10608-1-95 Information technology. International standardized profile TAnnnn.

Connection-mode transport service over connectionless-mode network service. Part 1. General overview

and subnetwork-type independent requirements

GOST R ISO/IEC 8824-93 Information technology. Open systems interconnection. Specification

abstract syntax notation one (ASN.1)

GOST R ISO/IEC 10040-99 Information technology. Open systems interconnection. Systems

management overview


requirements for thermal storage room heaters and test methods

GOST R IEC 332-1-96 Test on cables under fire conditions. Test on a single vertical insulated wire or cable


Message handling systems. Common messaging. Part 3. AMH11. Message transfer (P1)

GOST R IEC 491-95 Safety requirements for electronic flash apparatus for photographic purposes


TE. Connection-mode transport service over connection-mode network service. Part 1. Subnetwork-type

independent requirements for group TB



independent requirements for group TC


between systems. Open systems interconnection. Transport protocol identification mechanism


Definition and coding of application information elements

GOST R ISO/IEC 9545-98 Information technology. Open systems interconnection. Application layer

structure


between systems. High-level data link control (HDLC) procedures. General purpose XID frame information

field content and format

GOST R ISO/IEC ISP 11185-7-98 Information technology. International standardized profiles FVT2nn. Virtual

terminal basic class. Register of control object type definitions. Part 7. FVT2110 - entry control object


terminal basic class. Register of control object type definitions. Part 3. FVT215, FVT216 - application RIO

record loading control object. Terminal RIO record notification control object


terminal basic class. Register of control object type definitions. Part 2. FVT213, FVT214 - sequenced and

unsequenced terminal control objects


terminal basic class. Register of control object type definitions. Part 8. FVT221 - forms FEICO (field entry

instruction control object) №1


terminal basic class. Register of control object type definitions. Part 1. FVT211, FVT212 - sequenced and

unsequenced application control objects

GOST R ISO/IEC ISP 11185-4-98 Information technology. International standardized. profiles FVT2nn. Virtual

terminal basic class. Register of control object type definitions. Part 4. FVT217 - horizontal tabulation

control object

GOST R ISO/IEC ISP 10608-5-95 Information techhnology. International standardized profile TAnnnn.

Connection-mode transport service over sonnectionless-mode network service. Part 5. TA1111/TA1121

profiles including subnetwork-type dependent requirements for X.25 packet-switched data networks using

virtual calls



independent requirements for group TE

GOST R IEC 1029-1-94 Transrportable motor-operated electric tools. General safety requirements and

testing methods



independent requirements for group TD


testing methodology and framework. Part 2. Abstract test suite specification



dependent requirements for network layer, data link layer and physical layer concerning permanent access

to a packet swiched data network using virtual calls


testing methodology and framework. Part 5. Requirements on test laboratories and clients for the

conformance assessment process

GOST R ISO/IEC 9804-96 Information processing systems. Open systems interconnection. Service

definition for the commitment. Councurrency and recovery service element

GOST R IEC 870-5-5-96 Telecontrol equipment and systems. Part 5. Transmission protocols. Section 5. Basic

application on functions


terminal basic class. Register of control object type definitions. Part 6. FVT219 - status message control

object


terminal basic class. Register of control object type definitions. Part 5. FVT218 - logical image control object

GOST R IEC 335-1-94 Safety of household and similar electrical appliances. General requirements and test

methods

GOST R ISO/IEC 10025-3-94 Information technology. Telecommunications and information exchange

between systems. Transport conformance testing for connection-mode transport protocol operating over

connection-mode network service. Part 3. Transport test management protoсol specification

GOST R IEC 730-2-1-94 Automatic electrical controls for household and similar use. Particular requirements

for electrical controls for electrical household appliances and test methods


between systems. Open Systems Interconnection. Protocol for providing the connection-mode transport

service


between systems. High-level data link control (HDLC) procedures. Classes of procedures


Message handling systems. Common messaging. Part 1. MHS service support


transfer access and management. Part 6. AFT3 - file management service


testing methodology and framework. Part 1. General concepts

GOST R IEC 730-1-94 Automatic electrical controls for household and similar use. General requirements

and test methods


transfer access and management. Part 3. AFT11 - simple file transfer service (unstructured)


transfer access and management. Part 5. AFT22 - positional file access service (flat)

gost r iso/iec 27004-2011 information technology. · pdf filegost r iso/iec 27004-2011...

Documents