gopro3 user guide
TRANSCRIPT
-
7/29/2019 GoPro3 User Guide
1/34
1
U s e r M a n U a l
-
7/29/2019 GoPro3 User Guide
2/34
2 3
Join the GoPro party at acbk.c/gpto see
what other GoPro owners are capturing and sharing.
Shareyourootage and join the GoPro movement!
table of contents
Accessories 4
Mounts + Accessories 5
HERO3 Features 6
Camera LCD Status Screen 8
Camera User Interace Flow Chart 9
Soware Updates 10Basics 10
Camera Modes 13
Camera Settings 20
Delete 30
Capture Settings 32
Set Up 40
Wireless Controls 49
Storage/SD Cards 51
System Requirements 52
Transerring Files 53
Playback 54
Battery Lie 56
Important Warning Messages 58
Camera Assembly 59
Customer Support 65
-
7/29/2019 GoPro3 User Guide
3/34
4 5
hero3 ACCessories
Wrist Housing
Replacement Housing
Rechargeable Li-Ion Battery
Lens Replacement Kit
Caps + Doors
32GB/64GB microSD
More HERO3 accessories available at gp.c
Premium ACCessories
LCD Touch BacPac
Battery BacPac
Wi-Fi Remote
The Frame Mount
(HERO3 accessory)
mounts + ACCessories
Helmet Front
Mount
Chest Mount
Harness
Handlebar/Seatpost/
Pole Mount
Surboard Mounts
Floaty Backdoor Head Strap Suction Cup Mount Vented HelmetStrap
Roll Bar Mount Tripod Mount Anti-Fog Inserts Grab Bag oMounts
Curved + FlatAdhesive Mounts
Side Mount Camera TethersWi-Fi RemoteMounting Kit
see More at gp.cwear it. MoUnt it. love it.
-
7/29/2019 GoPro3 User Guide
4/34
6 7
Hero3 featUres
1. Status Indicator Lights (Red)
2. SHUTTER/SELECT Button
3. LCD Status Screen
4. Wi-Fi Indicator Light (Blue)
5. POWER/MODE Button
6. Micro HDMI Port(Cable not included)
7. microSDTM Card Slot(SD card not included)
8. mini-USB Port(Supports Composite A/Ccable/3.5mm stereo mic adapter,not included)
9. HERO Port
10. Battery Door
11. Wi-Fi ON/OFF Button
12. Audio Alert
Hero3 featUres
-
7/29/2019 GoPro3 User Guide
5/34
8 9
caMera lcd statUs screen caMera User interface flow cHart
MODES
CAMERA SETTINGS
CAPTURE SETTINGS WI-FI
SET UP
The LCD screen displays the ollowing inormation about HERO3 modes and settings:
1.Caa md/FoV Fld Vw
2. Cap sg md (not shown)
3.rl/FPs Fa P scd
4. t ival sg: (not shown)
5.C
6.t/sag/Fl
7.Bay L
n: The icons displayed above will vary depending on what mode your camera is in. *n:W Balac only appears in your camera display iP mode is
turnedon. Playbackonly appears i Playbackis activated.
-
7/29/2019 GoPro3 User Guide
6/34
10 11
UsinG YoUr Hero3: basics
GettinG stArteD
B g y hero3 :
1. i a csD, csDhC csDXC cad cadl w labl acg wad,aw pa cad .Speed Class 10 or higher cards are recommended. When using 0.5 second tLapor recording video in P mode, a Speed Class Rating 10 is required.
2. Plac bay caa.
3. Cag bay. The included lithium-ion battery comes partially charged. Tocharge, connect the included USB cable to camera and connect the other endo the cable to a power source such as a computer, GoPro Wall Charger orGoPro Auto Charger. No damage will occur to the camera or battery i used
prior to a ull charge.
Pro
tiP:
sa idca Lg w caa oFF adcagg, w: sa idca Lg are on when charging. sa idca Lg areoFFwhen charging is complete.
See BAtterY LiFe or more inormation.
See Protune or more inormation.
software UPdates
GoPro releases product updates through soware updates. Check
to see i any updates are available or your camera or other GoPro
products. Visit: gp.c/pda.
CAmerA DeFAuLt settinGsThe HERO3 Black Edition camera powers up with the ollowing deault settings:
Vd rl 1440p48ps
P rl 12 Megapixels (MP)
P B 30 photos in 1 second
t Lap 0.5 seconds
W-F OFF
Pro
tiP:
Want to change yourViDeoandPhoto settings?
See settinGs menu to make changes.
UsinG YoUr Hero3: basics
-
7/29/2019 GoPro3 User Guide
7/34
12 13
PoWerinG on AnD oFF
t pw on:
Press and release . The red saidca Lg ash three times and
the sd idcaemits three beeps.
t pw oFF:
Press or two seconds, then release. The red saidca Lg ash
several times and the sd idcaemits seven beeps.
Pro
tiP:
Want to turn your HERO3 into a one-button camera that
automatically starts recording P orVd once it
turns on? Set the camera to one Button mode.
See one Button mode or more inormation.
UsinG YoUr Hero3: basics
oVerVieW
The HERO3 eatures several camera modes. To cycle through the modes, press .
The modes will appear in the ollowing order:
ViDeo Record Video
Photo Capture single Photo
Photo Burst Capture Burst photos
time LAPse Capture Time Lapse photos
PLAYBACK
Appears only i the camer a is plugged into a TV/HDTV.
PLAYBACKallows you to play P andVd
on a TV/HDTV (via optional Micro HDMI cable or A/V
composite cable).
Pro
tiP:
Use Photo Burst to capture ast moving subjects.
See PLAYBACKor more inormation.
UsinG YoUr Hero3: caMera Modes
-
7/29/2019 GoPro3 User Guide
8/34
14 15
UsinG YoUr Hero3: caMera Modes
ViDeo
To recordVd, veriy the camera is inVd mode. I theVd icon on
your cameras LCD screen is not showing, press repeatedly until it appears.
t a cdg:
Press and release . The camera will emit one beep and the red sa
idca Lg will lash while recording.
t p cdg:
Press and release . The red saidca Lg ash three times and the
camera emits three beeps to indicate recording has stopped.
The HERO3 automatically stops recording when the memory card is ull or the
battery is out o power. Your video will be saved beore the camera powers oFF.
SeeViDeo modeor instructions on how to change resolution settings.
UsinG YoUr Hero3: caMera Modes
Photo
To capture a P, veriy the camera is in P mode. I the P icon on
your cameras LCD is not showing, press repeatedly until it appears.
t ak a p:
Press and release . The camera beeps two times and the red sa
idca Lg ash.
See Photo modes or instructions on how to change resolution settings and
other Photo eatures.
-
7/29/2019 GoPro3 User Guide
9/34
16 17
UsinG YoUr Hero3: caMera Modes
Photo Burst
In P B mode your camera takes multiple photos in short time intervals
3 p/1 cnd, 5 p/1 cnd, 10 p/1 cnd,10 p/2 c-
nd, 30 p/1 cnd, 30 p/2 cnd 30 p/3 cnd .
To capture a P B series, veriy the camera is in P B mode. I the
P B icon on your cameras LCD screen is not showing, pressrepeatedly until it appears.
t ak a P B :
Press and release . The red saidca Lg ash and the camerabeeps multiple times.
Pro
tiP:
Sometimes 30 p/1 cd is too ast. Try a slower
B setting to better match the action.
See Photo Burst or instructions on how to change the interval settings.
UsinG YoUr Hero3: caMera Modes
time LAPse
t Lap mode captures a series o photos at 0.5, 1, 2, 5, 10, 30 or 60 second
intervals. When using the 0.5 seconds setting, an SD card with a Speed Class 10
Rating is required.
To capture a t Lap series, veriy the camera is in t Lap mode. I the
t Lap icon is not showing on your cameras LCD screen, press
repeatedly until it appears.
t ak t Lap:
Press and release . The camera initiates countdown and the red sa indca
Lg fash each time a P is taken.
t p t Lap:
Press and release . The red sa indca Lg fash three times and the
camera emits three beeps to indicate that t Lap has stopped.
See time LAPse or instructions on how to change the interval settings.
-
7/29/2019 GoPro3 User Guide
10/34
18 19
UsinG YoUr Hero3: caMera Modes
settinGs
The sg menu allows you to adjust a variety o camera settings including:
Vd rl
P rl
t Lap
P B
C P
and more
See settinGs menu to make changes, learn how to navigate menu options
and read more details on each setting.
UsinG YoUr Hero3: caMera Modes
PLAYBACK
You can playback your GoPro P andVd on a TV/HDTV or with the
LCD Touch BacPac (optional accessory). Playbackappears as a camera mode
when camera is powered on and plugged into a TV/HDTV.
See PLAYBACKor more inormation on viewing yourVd and P.
caMera settinGs caMera settinGs
-
7/29/2019 GoPro3 User Guide
11/34
20 21
caMera settinGs
settinGs
t sg :
1. Veriy the camera is in the sg menu. I the sg icon on your
cameras LCD screen is not showing, press repeatedly until it appears.
2. Press to enter menu.
3. Use to cycle through the various sg options.
4. Press to select desired option.
5. To exit, hold down or two seconds or cycle through to and press .
Pro
tiP:
I at any time you wish to exit rom the settinGs menu,
press and hold or two seconds.
caMera settinGs
VIDEO RESOLUTION/FPS/FOV MODES
You can change rl, FPs andVw Agl FoV or your HERO3camera when usingVdmode. This mode contains sub-level menu options.
oc sg :
1. Press to enter .
2. Use to cycle through options.
3. Press to enter desired menu.
4. Use to cycle through each sub-menu option and to select.
5. To change additional options, repeat step 4.
6. To exit, hold down or two seconds or cycle through to and
press .
caMera settinGs caMera settinGs
-
7/29/2019 GoPro3 User Guide
12/34
22 23
caMera settinGs
t hero3 Black ed f llwg Vd Cap d:
VideoResolution
NTSCps
PALps
stdMode
Protune Field o View(FOV)
ScreenResolution
4k /4k Cin
1512
12.512
No Yes Ultra Wide 3840x2160, 16:94096x2160, 17:9
2.7k /2.7k Cin
3024
2524
Yes* Yes Ultra Wide 2716x1524, 16:92716x1440, 17:9
1440p 483024
482524
Yes Yes Ultra Wide 1920x1440, 4:3
1080p 60483024
50482524
Yes Yes Ultra WideMediumNarrow
1920x1080, 16:9
960p 10048
10048
Yes YesNo
Ultra Wide 1 28 0x 96 0, 4:3
720p 12060
12050
Yes YesNo
Ultra WideMedium*Narrow*
1280x720,16:9
WVGA 240 240 Yes No Ultra Wide 848x480, 16:9
*720/120 and 720/100 only support Ultra Wide and Narrow FOV.
n:Pmode is only possible in selectVdl.
caMera settinGs
VideoResolution
Best Use
4k /4k Cin
Stunning 8MP resolution video with proessional low light perormance. Pull8MP stills rom video. Recommended or tripod or xed position shots.
2.7k /2.7k Cin
16:9 / 17:9 resolution video downscales to provide stunning, cinema-qualityresults or proessional productions. Recommended or tripod or xedposition shots.
1440p Recommended or body-mounted shots as larger viewing area and high ramerate yield the smoothest, most immersive results or high action capture.
1080p 1080p60 is great or all shots as high resolution and rame rate yeild stunningresults. Tripod or xed mounting or 1080p48 and 30ps and 1080p24 is ideal ortelevision and lm productions.
960p Use or body-mounted shots and when slow motion is desired. Provides largeviewing area and smooth results or high action capture.
720p Good or handheld shots and when slow motion is desired.
WVGA Good when super slow motion is desired and standard denition is acceptable.
Pro
tiP:
Setting the Protune mode to on allows or high-quality capture,
neutral color and 24ps video or proessional video production.
See Protune or more inormation.
caMera settinGs caMera settinGs
-
7/29/2019 GoPro3 User Guide
13/34
24 25
caMera settinGs
PHOTO RESOLUTION MODES
The HERO3 can capture photos at 12mP, 7mP and 5mP resolutions. Any changeto photo resolution also aects photos captured in P, P B andt Lap modes.
PhotoResolution
Field o View(FOV)
12MP Wide (Deault)
7MP Wide
7MP Medium
5MP Wide
caMera settinGs
CONTINUOUS PHOTO
Cnn P mode allows you to capture a series o P continuously
while holding down the button until you release the Shutter button.
3 photos every 1 second
5 photos every 1 second
10 photos every 1 second
n: Your camera will remain in the Continuous Photo mode until you
return it to the sinGLe photo capture setting option.
caMera settinGs caMera settinGs
-
7/29/2019 GoPro3 User Guide
14/34
26 27
caMera settinGs
PHOTO BURST OPTIONS
P B mode captures series o P when is pressed. Pcan be captured in the ollowing rates:
3 photos in 1 second
5 photos in 1 second
10 photos in 1 second
10 photos in 2 seconds
30 photos in 1 second (Deault)
30 photos in 2 seconds
30 photos in 3 seconds
TIME LAPSE
Several time interval options are available or t Lap mode, including
0.5, 1, 2, 5, 10, 30 and 60 seconds.
caMera settinGs
CAPTURE SETTINGS MENU
Cap sg allows you to adjust the ollowing advanced camera settings:
Caa oa
sp m
sla Vd ad P
Lpg Vd
P
W Balac
See CAPture settinGs section or a complete list o capture options.
caMera settinGs caMera settinGs
-
7/29/2019 GoPro3 User Guide
15/34
28 29
caMera settinGs
SET UP MENU
The s up menu allows you to adjust the ollowing camera settings:
Dal d a Pw up
o B md
ntsC/PAL
o sc Dplay
sa idca Lg
sd idca
m/Day/Ya/t
See set uP menu section or a complete list o set up options.
caMera settinGs
WIRELESS CONTROLS
The HERO3 cameras built-in Wi-Fi allows you to connect to the Wi-Fi Remoteor smartphone/tablet via the GoPro App. When W-F is on, your W-Fsa idca Lg will blink blue.
t W-F on/oFF:
Press to turn W-F on/oFF. The most recently used W-F mode will beactive when Wi-Fi is on.
See WireLess ControLs section or a complete list o wireless unctions.
caMera settinGs caMera settinGs
-
7/29/2019 GoPro3 User Guide
16/34
30 31
DELETE
Delete the last le or all les and ormat the memory card. During delete LAst or
ALL, the sa idca Lg blink until operation is complete.
CANCEL (Deault)
LAST
ALL
t dl LAst ALL:
1. Veriy the camera is in sg mode. I the sg icon on your
cameras LCD screen is not showing, press repeatedly until it appears.
2. Press to enter sg menu.
3. Use to cycle through sg to locate .
4. Press to enter Dl.
5. Use to cycle through options.
6. Select highlighted option by pressing .
7. To exit, hold down or two seconds or cycle through to and press .
Pro
tiP:Use caution by selectingALL, the memory card will beormatted, deleting every le on your SD card.
EXIT
From the screen, press to exit the sg menu.
Pro
tiP:
I at any time you wish to exit rom the settinGs menu,
press and hold or two seconds.
caPtUre settinGs caPtUre settinGs
-
7/29/2019 GoPro3 User Guide
17/34
32 33
CAPture settinGs
t Cap sg :
1. Veriy the camera is in sg mode. I the sg icon on your
cameras LCD screen is not showing, press repeatedly until it appears.
2. Press to enter .
3. Use to cycle through sg to locate .
4. Press to enter Cap sg.
5. Use to locate the desired option to change.
6. Press to select the desired option.
7. Some options have a sub-menu. Use to cycle through the sub-menus.
8. Press to select a highlighted option.
9. To exit, hold down or two seconds or cycle through to and
press .
You can customize the way your HERO3 camera capturesVdandP in the
Cap sg menus, such as upd Dw, Lpg Vd andW Balac.
UPSIDE DOWN
Mounting your HERO3 upd Dw but wish the les to appear upright whenviewing or editing? This setting eliminates the need to ip yourVd or Paer recording.
Camera right side up (Deault)
Camera upside down
SPOT METER
Turn on sp mwhen lming rom within a dark space pointing the
camera into a brighter setting, such as lming the outdoors rom within a car.
When sp mis set to on, appears in the LCD window.
OFF (Deault)
ON
caPtUre settinGs caPtUre settinGs
-
7/29/2019 GoPro3 User Guide
18/34
34 35
SIMULTANEOUS VIDEO AND PHOTO
slan Vd and P mode, allows you to simultaneously capturebothVd and P. You can set the camera to take a P every 5cnd, 10 cnd, 30 cnd or 60 cnd while you recordVd.To set your camera to Pc in Vd md veriy that a supportedVdresolution is selected and that Pn is turned oFF.
OFF
5 seconds
10 seconds
30 seconds
60 seconds
n: You can capture slan Vd and P in one o the ollowingresolution settings: 1080p 24 ps, 1080p 30 ps, 720p 60ps or 1440p 24 ps.
Pro
tiP:
Your resulting Photo size is determined by the Video dimensionsyou select.
Vd Dnn mgapxl
16:9 (1080p, 720p) 8MP
4:3 (1440p) 12MP
While capturingVdyou can manually take a P at any time by
simply pressing .
LOOPING VIDEO
Lpg Vd mode allows you to record a continuously looping video that
overwrites itsel until you press the button to stop it. Lpg Vd is
not available i P mode is turned on.
Lpg Vd p lcd:
OFF (Deault)
Max videoCamera records until memory card is ull, then overwrites with anew video.
5 min videoCamera records or 5 minutes, then begins a new video,progressively overwriting the previous 5 minute video.
20 min videoCamera records or 20 minutes, then begins a new video,progressively overwriting the previous 20 minute video.
60 min videoCamera records or 60 minutes, then begins a new video,progressively overwriting the previous 60 minute video.
120 min video Camera records or 120 minutes, then begins a new video,progressively overwriting the previous 120 minute video.
Pro
tiP:
Multiple chapter les are written to your memory card. Thisallows or small segments o content to be overwritten duringloop recording. When viewing on a computer screen you will seeseparate les or each time segment. Use video editing soware iyou wish to combine les into a longer video.
n:Lpg Vd is not enabled when in P mode.
caPtUre settinGs caPtUre settinGs
-
7/29/2019 GoPro3 User Guide
19/34
36 37
PROTUNE
The HERO3 camera can record video in Pmode. P is a video mode
that unlocks the cameras ull potential, yielding stunning image quality and
cinema-caliber video or proessional productions. Content creators now have ar
more exibility and workow efciency than ever beore.
Protune KeY BeneFits inCLuDe:
hg-Qaly iag Cap
Protunes high data rate captures images with less compression, giving content
creators higher quality or proessional productions.
nal Cl
Protunes neutral color prole oers more exibility during post-production color
correction. Protunes log curve captures more detail in shadows and highlights.
Fl/tV Fa ra sadad
Record video in cinema-quality 24ps and easily intercut GoPro content with other
source media without the need to perorm ps conversion.
Turning Pon aects several settings and eatures, such asVd
rl, p, FoV and sla Vd ad P.
OFF (Deault)
ON
Protune resoLutions cd:
P is available in the ollowing HERO3 Black Edition resolutions:
RESOLUTION FPS
4k / 4kCin 15/12.5,12
2k / 2kCin 30/25, 24
1440p 48, 30,25,24
1080p 60, 50, 48, 30, 25, 24
960p 100
720p 120, 100
ComPAtiBiLitY:
P is compatible with proessional color correction tools, editing programs
and GoPro CineForm Studio.
caPtUre settinGs caPtUre settinGs
-
7/29/2019 GoPro3 User Guide
20/34
38 3938
WHITE BALANCE
W Balac adjusts the overall color tone o videos. W Balac will
only be available i P mode is turned on. The deault W Balac
setting isAuto. When capturing in any W Balac setting other thanAuto, you may need to color correct your video with an editing program to
achieve your desired color. Only use a non-AutoW Balac setting iyou are an advanced user.
Pro
tiP:
Consider manually setting W Balac to the ollowing settingswhen operating in the ollowing conditions:
Incandescent or sunrise/sunset lighting 3000K
Daylight or sunlit shooting 5500K
Cool white uorescent skylight lighting 6500K
Industry standard optimized color Cam RAW
Ca rAW Caa rAWThe HERO3 camera can recordVd in P mode in Ca rAW. GoPro
Ca rAW mode yields a minimally processed data le direct rom the image
sensor that allows or more precise adjustments to be made in post-process.
Working in this mode takes ull advantage o the image sensors capabilities.
Pro
tiP:
Protune usesAuto W Balac and will override any
non-Auto W Balac setting.
39
EXIT
From the eXit screen press to exit the Capsg menu.
Pro
tiP:
I at any time you wish to exit rom the CAPturesettinGs
menu, press and hold or two seconds.
set UP set UP
-
7/29/2019 GoPro3 User Guide
21/34
40 41
set uP
t s up :
1. Veriy the camera is in sg mode. I the sg icon on your
cameras LCD screen is not showing, press repeatedly until it appears.
2. Press to enter .
3. Use to cycle through sg to locate .
4. Press to enter s up.
5. Use to locate the desired option to change.
6. Press to select the desired option.
7. To exit, hold down or two seconds or cycle through to andpress .
DEFAULT MODE AT POWER UP
You can set the cameras Dalmode at power up to any o the ollowing modes:
(actory deault)
set UP set UP
-
7/29/2019 GoPro3 User Guide
22/34
42 43
ONE BUTTON
With o B mode selected, the camera automatically begins recording whenpowering the camera on. o B mode can be congured to start inVdor t Lap.
OFF (Deault)
ON
t o B d on:
1. Veriy the camera is in sg mode. I the sg icon on your
cameras LCD screen is not showing, press repeatedly until it appears.
2. Press to enter menu.
3. Use to cycle through sg to locate .
4. Press to enter s up.
5. Use to cycle through to locate .
6. Press to enter o B menu.7. Use to cycle through options.
8. Press to select a highlighted option.
9. To exit, hold down or two seconds or cycle through to and press .
Next time you power your camera on, it will begin recording in its Dal
Pw up md. To stop recording, push and hold or two seconds.
one Button moDe cd
To exit o B mode:
1. Power camera on.
2. Press and hold until shows in the LCD window.
3. Press to enter.
4. Use to highlight oFF.
5. Press to select.
6. To exit, hold down or two seconds or cycle through to and
press .
Pro
tiP:
To stop the capture process (ViDeoortime LAPse) when in
one Button, press and hold or two seconds. You will
return to theone Buttonmenu where you can turn
one Buttonmode oFF.
n:o B mode is disabled when connected to Wi-Fi Remote or GoPro App.
set UP set UP
-
7/29/2019 GoPro3 User Guide
23/34
44 45
NTSC / PAL
The ntsC and PAL settings governVd recording rame rate and playback
when viewingVd on a TV/HDTV. Select ntsC when viewing a TV/HDTV in
North America. Select PAL i viewing on a PAL TV/HDTV (most televisions
outside o North America) or i viewing on a PAL TV/HDTV in any region.
ntsC (Deault) PAL
4k/15ps 4k/12.5ps
4k Cin/12ps 4k Cin/12ps
2k/30ps 2k/25ps
2k Cin/24ps 2k Cin/24ps
1440p/48ps 1440p/48ps
1440p/30ps 1440p/25ps
1080p/60ps 1080p/50ps
1080p/48ps 1080p/48ps
1080p/30ps 1080p/25ps
1080p/24ps 1080p/24ps
960p/100ps 960p/100ps
960p/48ps 960p/48ps
720p/120ps 720p/120ps
720p/60ps 720p/50ps
WVGA/240ps WVGA/240ps
ONSCREEN DISPLAY
To display or hide the recording icons and le inormation onVd or theviewing screen during playback, turn oc Dplay osD oFF or on.
OFF
ON (Deault)
STATUS INDICATOR LIGHTS
Keep all our sa idca Lg active, only two active (ront and back)or turn oFF all lights.
4 (Deault)
2
OFF
SOUND INDICATOR
You can adjust volume or turn oFF the sd idca.
100% (Deault)
70%
OFF
set UP set UP
-
7/29/2019 GoPro3 User Guide
24/34
46 47
MANUAL POWER OFF
The HERO3 can be congured to automatically power oFF aer a specic
period o inactivity (when noVd or P are being taken and no
buttons have been pressed).
MANUAL (Deault)
60sec
120sec
300sec
MONTH / DAY / YEAR / TIME
Set the HERO3 clock to ensureVd and P les are saved with the
correct date and time.
t cag m/Day/Ya/t:
1. Veriy the camera is in sg mode. I the sg icon on your
cameras LCD screen is not showing, press repeatedly until it appears.
2. Press to enter menu.
3. Use to cycle through sg to locate .
4. Press to enter s up.
5. Use to locate .
6. Press to enter m/Day/Ya/tsub-menu; mmm willbe highlighted.
7. Press to access the list o months (1 to 12).
8. Use to cycle through list until desired selection is highlighted.
9. Press to select.
10. To advance to the next option, press .
11. Repeat steps 7, 8 and 9 to make selections or day (DD), year (YY), hour(hh) and minutes (mm).
12. To exit, hold down or two seconds or cycle through to and
press .
n:I the battery is removed rom the camera or an extended period o time
month/DAY/YeAr/timewill need to be set again.
set UP wireless controls
-
7/29/2019 GoPro3 User Guide
25/34
48 49
EXIT
From the eXit screen, press to exit the s up menu.
Pro
tiP:
I at any time you wish to exit rom the set uP menu, press
and hold or two seconds.
WireLess ControLs
The built-in Wi-Fi allows your HERO3 camera to connect to the Wi-Fi Remoteand smartphone/tablet via the GoPro App.
t W-F on/oFF va W-F b:
Press to turn W-Fon/oFF. When turning W-F on the Wi-Fi mode willbe set to the most recently used mode.
usinG hero3 With the Wi-Fi remote not PAirinG
Pair your HERO3 with the Wi-Fi Remote to control your camera remotely. TheWi-Fi Remote can control up to 50 cameras at a time at distances o up to600/180m in optimal conditions.
1. Power on the HERO3 and turn W-F on.
2. Press to cycle through to the sg menu.
3. Press to enter .
3. Use to cycle through to locate .4. Press to enter Wl Cl.
5. You will see .
6. Press again to enter the sub-menu.
7. Use to select W-F rC.
8. Press to select it.
9. Use to select Current or neW.
10. Press to select desired option.
wireless controls
WireLess ControLs (ContinueD)
storaGe/Microsd cards
The HERO3 camera is compatible with 2GB, 4GB, 8GB, 16GB, 32GB and64GB
-
7/29/2019 GoPro3 User Guide
26/34
50 51
WireLess ControLs (ContinueD)
o y W-F r:
1. Turn on the GoPro Wi-Fi Remote.
2. While holding , press and release .
3. Once you see , you can release .4. A check will appear once the Wi-Fi Remote and camera have
successully paired.
The Wi-Fi Remotes LCD screen will now mirror the HERO3 LCD screen.
usinG the hero3 With the GoPro APP
The GoPro App lets you control your camera remotely using a smartphone or
tablet. Features include ull camera control o all settings, live video preview to
your smartphone or tablet or easy shot raming and more.
The GoPro App is available or ree at the Apple App Store and is coming soon
to Google Play.
Pro
tiP:
Beore you hit the shutter, see what your HERO3 camera sees
by viewing it on your smartphone or tablets screen.
See gp.c or more inormation.
p , , , ,
capacity csD, csDhC andcsDXC memory cards. While all speed class
ratings are compatible, GoPro requires using an SD card with Speed Class Rating
10 or higher speed when recording in Pmode, or when using the 0.5 t
Lap setting. GoPro recommends using brand name memory cards or maximum
reliability in high-vibration activities.
t sD cad: t v sD cad:
1. Slide memory card into card slot
with label acing ront o camera.
2. The card will click into place when
ully inserted.
1. Place ngernail against edge omemory card and lightly press
urther into camera.
2. Card will spring out ar enough tobe removed.
Pro
tiP:
Use care when handling memory cards. Avoid liquids, dust and
debris. As a precaution, turn o the camera beore inserting or
removing the card. Check manuacturer guidelines regarding use
in acceptable temperature ranges.
See Protune or more inormation.
sYsteM reqUireMents
The HERO3 camera is compatible with Microso XP (Service Pack 2) or later
transferrinG files
to trAnsFer ViDeo AnD Photo FiLes to A ComPuter
-
7/29/2019 GoPro3 User Guide
27/34
52 53
and Mac OS X 10.4.11 or later.
WinDoWs mACWindows XP (Service Pack 2 or later)or Vista
Mac OS X 10.4.11 or later
3.2GHz Pentium 4 or aster 2.0GHz Intel Core Duo or aster
DirectX 9.0c or laterMinimum 1GB o system RAM Minimum 1GB o system RAM
Video card with minimum 256MBo RAM
Video card with minimum 128MBo RAM
Pro
tiP:
Want to see your ootage and stills on the big screen? Plug
your HERO3 directly into a TV/HDTV with GoPros Micro HDMI
cable or USB cable (optional accessories).
o a PC:1. Connect the camera to the computer using included USB cable.
2. Press to turn on the camera.
3. Double click My Computer and locate Removable Disk.
4. I Removable Disk is not showing, close My Computer older and
reopen it. The Removable Disk icon should appear.5. Double click Removable Disk icon.
6. Double click DCIM older icon.
7. Double click 100GOPRO icon to view all P andVd les.
8. Copy/move les to the computer or external hard drive.
o a mac:
1. Connect the camera to Mac using included USB cable.
2. Press to turn on the camera.
3. The Mac recognizes the camera as an external hard drive. Double clickicon or external drive to access les.
4. Copy/move les to computer or external hard drive.
imPortAnt tiP For mAC users: When deleting fles rom the memory card,
empty the trash beore removing the memory card or unplugging the camera.
PlaYback
to VieW ViDeos AnD Photos
PlaYback
PLAYBACK on LCD touCh BACPAC
-
7/29/2019 GoPro3 User Guide
28/34
54 55
Vd and P can be viewed on a TV/HDTV or the LCD Touch BacPac(optional accessory).
PLAYBACK on tV/hDtV
t bw Vd ad P:
1. Plug the camera into a TV/HDTV with a mc hDmi or a usB to a
Cp Cabl (optional accessories).
2. Turn camera on.
3. On your camera press to cycle to . Press .
4. HERO3 displays thumbnail previews o allVd and P on theSD card. P sets taken in C P, PB and tLap display the rst P in a series.
5. While in thumbnail preview use to cycle through thumbnails. Pressto view.
6. Use and to navigate backward and orward to see more mediales on your memory card.
7. Highlight desired le to view and press .
8. Depending on whether you are viewingVd and P, dierent
control options will appear. Use the and buttons to navigate.
n:P B andt Lap fles will display the frstP in the series.
To view allP in a series, use to selectVieW and press .
Playback using the LCD Touc BacPac ollows a similar process/procedure as
described with a ew slight variations.
See the LCD Touch BacPac User Manual or more inormation.
batterY life
ChArGinG BAtterY
batterY life
usinG the CAmerA WhiLe ChArGinG
-
7/29/2019 GoPro3 User Guide
29/34
56 57
The battery icon displayed in the cameras LCD will blink when the battery drops below
10%. I recording is occurring when battery reaches 0%, the camera will save the le
and power oFF.
t cag bay:
1. Connect the camera to a
computer or USB power supply(such as the GoPro Wall Chargeror GoPro Auto Charger).
2. The Red sa idca Lgremains on while the batteryis charging.
3. The Red sa idca Lgwill turn oFF when the battery isully charged.
The battery will charge to 80% in one hour and 100% in two hours when usingGoPros 1000mAh USB-compatible Wall or Auto Charger. Other chargers may
charge at only hal this rate.
No damage will occur to the camera or the battery i used together prior to ull charge.
Spare batteries and additional charging accessories are available at gp.c.
You can charge the cameras battery while recordingVd or taking P. Simply
plug the camera into a GoPro-specic auto, wall or phone charger to charge the
HERO3 camera while recordingVd or P. It is best to use GoPros 1AMP
(1000mAh) Wall or Auto Charger or maximum charging perormance while the
camera is in use. Perormance o non-GoPro chargers cannot be guaranteed.
remoVinG the BAtterY From the CAmerA
The HERO3 battery is designed to have a tight t to maximize reliability in high-
vibration activities.
t v bay:
1. Remove the battery door by placing your thumb in the indentation in the
battery door (on the back o the camera) and sliding it to the le.
2. Allow the door to pop out. Grasp the battery pull-tab and remove rom the camera.
iMPortant warninG MessaGes
miCrosD CArD messAGes
caMera asseMblY
AssemBLinG the CAmerATh HERO3 h i i t t 197/60 d i t t d
-
7/29/2019 GoPro3 User Guide
30/34
58 59
no sDNo card present. The camera requires a microSD, microSDHC or
microSDXC card to recordVd or take P.
sD FuLL Card is ull. Delete les or swap card.
sD error Camera unable to access card.
FiLe rePAir iCon on the LCDI you see the Fl rpaicon on the LCD screen, yourVd le
was corrupted during recording. Press any button and the camera
will repair the le.
temPerAture WArninG iCon on the LCDThe tpa Wanng icon will appear on the LCD when the
camera has become too hot and needs to cool down. Simply let it sit
and cool beore attempting to use it again. Your camera will not allowitsel to overheatdo not worry, no damage has occurred.
The HERO3 camera housing is waterproo to 197/60m and is constructed opolycarbonate and stainless steel or ultimate durability. The HERO3 has a new improvedlatch closurethat oers one hand open-and-close unctionality and locking.
t plac hero3 caa g:
1. Place camera in housing.
2. Position the backdoor into place.
3. Lit the latch arm into upright position allowing the hinged arm tohang downward.
4. Hook grooved portion o hinged arm to grooved top o the backdoor.
5. Use one nger to push down the latch arm to snap into place.
t v hero3 caa g:
1. Grip the housing with le hand.
2. Using right hand, place thumb to le side o arrow and index nger justbelow latch arm.
3. Pinch ngers together, sliding arrow to the right.
4. Use ngertips to pull upward, allowing latch arm to swing to ullyupright position.
5. Li hinged arm over the housing and remove the HERO3.
To close properly, be sure grooved sections o the latch arm and the backdoorare hooked.
caMera asseMblY
The HERO3 housing comes with two types o backdoorsSkeleton and Waterproo.
caMera asseMblY
sWAPPinG housinG Doors
-
7/29/2019 GoPro3 User Guide
31/34
60 61
skl Backd Wap Backd
The Skeleton Backdoor (non-waterproo)provides better sound quality by allowingmore sound to reach the camerasmicrophone. It also reduces wind noiseat speeds up to 100mph when mountedon helmets, motorcycles, bikes and otherast-moving vehicles. Use this backdooronly when sand, excessive dirt/dustand water damage is not a risk. Thisbackdoor is also recommended or useinside vehicles.
The Waterproo Backdoor makesthe housing waterproo to 197/60m.Use this door when you need toprotect the camera rom water andother environmental hazards.
Pro
tiP:
Apply RAIN-X or a similar anti-beading solution to the housing lens
to prevent waterspots rom orming when using your camera in rain
or water. When RAIN-X is not available, periodically licking your
lens is a good backup solution. Dunk your camera aer licking.
Trust us, this works.
Your HERO3 camera housing comes with two types o backdoorsWaterproo
and Skeleton (non-waterproo).
t cag backd:
1. Open the backdoor o the housing so that it is hanging downwards.
2. Pull downwards on the backdoor until it snaps ree rom the hinge.3. Line up replacement backdoor into the hinge opening.
4. Push upwards on the backdoor until it clicks into place.
caMera asseMblY
PreVentinG WAter DAmAGe to Your CAmerA
caMera asseMblY
AttAChinG Your CAmerA to mounts
-
7/29/2019 GoPro3 User Guide
32/34
62 63
The rubber seal that lines the camera housing orms a waterproo barrier that
protects your HERO3 in wet and underwater conditions. Keep the camera housings
rubber seal clean; a single hair or grain o sand can cause a leak.
Aer every use in salt water you will need to rinse the outside o the housing
with non-salt water and dry. Not doing this can eventually cause corrosion o the
hinge pin and salt buildup in the seal, which can cause ailure.To clean the seal, rinse in resh water and shake dry (drying with a cloth may
cause lint to compromise the seal). Re-install the seal into the grooves in the
backdoor o the housing.
WArninG: Failure to ollow these steps each time you use yourHERO3 can
result in leaks that may damage or destroy your camera. Your warranty does not
cover water damage resulting rom user error.
To attach your HERO3 camera to a mount, you will need an attachment buckle,
thumb screw or hardware depending on the mount you are using. For more
inormation on mounts, visit gp.c/pp.
AacBckl
tb scw Wag Cpl u
usinG CurVeD or FLAt ADhesiVe mounts
The curved and at adhesive mounts make it easy to attach the camera to curved
and at suraces o helmets, vehicles and gear. With the attachment buckle the
assembled camera housing can be clicked on/oFF the secured adhesive mounts.
Fla Adv m Cvd Adv m
caMera asseMblY
AttAChinG ADhesiVe mounts
A l t l l W il di t th d b i ill
cUstoMer sUPPort
-
7/29/2019 GoPro3 User Guide
33/34
64 65
Pro
tiPs:
Apply to clean surace only. Wax, oil, dirt or other debris will
reduce adhesion, which can result in a weak bond and risk o
losing camera should connection ail.
Attach mount in room temperature conditions. Mounts
adhesive will not bond properly i applied in cold or damp
environments to cold or damp suraces, or i the surace is not
room temperature.
Adhesive mounts should only be mounted to smooth suraces;
porous or textured suraces will not enable a proper bond.
When applying mount, rmly press into place and ensure ull
contact over entire surace.
For best results, attach the mount 24 hours prior to use.
See gp.c/pp or more inormation on mounts.
Lckg Plg
Using the HERO3 in high impact sports such as surng or skiing
where signicant impact may occur? Use the special locking
plug which securely locks the attachment buckle ngers into
place--helping prevent accidental housing release rom the mount.
The circular ring ts over the thumbscrew and acts as a leash to
prevent dropping or losing the locking plug.
GoPro is dedicated to providing the best possible
service. To reach the GoPro Customer Support Team,
visit gp.c/pp.
-
7/29/2019 GoPro3 User Guide
34/34
66
Learn about more GoPro products at: gp.c
130-02482-000 REVA Please Recycle.