golden apartments complete renovation project …...golden apartments complete renovation project...

GOLDEN APARTMENTS COMPLETE RENOVATION PROJECT 2312 N. Golden Ave San Bernardino, CA 92404 SUPPLEMENT TO: PLUMBING SPECIFICATIONS

• 22 Plumbing

o Re-Pipe PEX o Fixtures

Kitchen • Kitchen sink -33x22 Double bowl, drop-in, self-rimming, 8"deep, three

hole, stainless steel. HDS#500872 • Kitchen sink faucets to be Delta Single Handle #100LFWF (no spray

hose). ADA NO SUBSTITUTIONS • Sink Faucet Delta aerator flow must be less than 1.5 GPM • InSink Erator Badger 500 1/2HP with cord Garbage Disposal

Bath • Lavatory Sink Kohler Bryant 20 1/8” x 16 ½” oval white drop-in

#K26994-4-0 • ADA Lavatory Sinks American Standard Lucerne Wall-Hung Lavatory

White 4” center hole #0356.041. Must support minimum of 400lbs. • Lav Bath Faucets to be Delta Single Handle #523LFHDF ADA • New Angle Stops shall be "1/4 turn" ball valve style • New shower valves to be Delta #R10000-UNWS. • Shower head not to exceed 1.5 GPM • Toilet – 1.28 GPF. ADA American Standard Cadet PRO ELONGATED

WHITE • Shower doors - Deluxe bi-pass doors with chrome finish & textured

glass. HD # 501724 or equivalent. o Water Heater – TBD o Hose bibs shall be 1/4 turn, ball valve style w/key. o Laundry room needs floor drain. o All laundry wall drain pipe to be 2" ABS.

M19© 2008 AS America Inc. Revised 2/08

To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Black ❏ Linen❏ Faucet*:❏ Faucet Finish:❏ Supplies:❏ 1-1/4" Trap:❏ Nipple:❏ Bracket Support (by others):❏ Concealed Arms Support (by others):

* See faucet section for additional models available

LUCERNE™WALL-HUNG LAVATORY

VITREOUS CHINA

LUCERNE™ WALL-HUNG LAVATORY

• Wall-hung sink• Vitreous china• Front overflow• D-shaped bowl• Self-draining deck area with contoured back and side splash shields• Faucet ledge

Faucet holes on 203mm (8") centers (Illus.):❏ 0356.028 For exposed bracket support Shown with 4801.862 Amarilis Heritage faucet with Triune Cross handles (not included)❏ 0356.015 For wall hanger (included) or concealed arms support❏ 0356.037 For wall hanger (included) or concealed arms support • Extra right-hand hole❏ 0356.073 For wall hanger (included) or concealed arms support • Extra left-hand hole

Faucet holes on 102mm (4") centers:❏ 0355.027 For exposed bracket support❏ 0355.012 For wall hanger (included) or concealed arms support❏ 0355.034 For wall hanger (included) or concealed arms support • Extra right-hand hole❏ 0355.056 For wall hanger (included) or concealed arms support • Extra left-hand hole

Single center faucet hole (Illus.):❏ 0356.041 For exposed bracket support Shown with 1340.000 metering faucet (not included)❏ 0356.421 For wall hanger (included) or concealed arms support❏ 0356.137 For wall hanger (included) or concealed arms support • Extra right-hand hole❏ 0356.115 For wall hanger (included) or concealed arms support • Extra left-hand hole

Nominal Dimensions: 521 x 464mm(20-1/2" x 18-1/4")

Bowl sizes:381mm (15") wide254mm (10") front to back 165mm (6-1/2") deep

Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A112.19.2 for Vitreous China Fixtures

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-LINES AND ANSI A117.1 ACCESSIBLE AND USABLEBUILDINGS AND FACILITIES - CHECK LOCAL CODES.Top of front rim mounted 864mm (34") from finished floor.

0356.028

0356.041

BARRIER FREE

M20© 2008 AS America Inc.

102 mm(4)

152 mm(6)

152 mm(6)

86 mm(3-3/8)

203 mm(8)

8 mm(5/16)

464 mm(18-1/4)

521 mm(20-1/2)

13 mm(1/2)

FINISHEDWALL

(6) 25mm (1") DIA.ACCESS HOLES

FOR CONC. ARMS

102 mm(4)

25 mm(1)

79 mm(3-1/8)

267 mm(10-1/2)

425 mm(16-3/4)

114 mm(4-1/2)

44 mm(1-3/4)

38 mm(1-1/2)

10mm (3/8)DIA. ANCHOR

SCREW HOLES203 mm

(8)

SUPPLIESAS REQUIRED

1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG

1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN

27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

206 mm(8-1/8)

*286 mm(11-1/4)

298 mm(11-3/8)*

352 mm(13-7/8)*

787mm (31) 864mm (34)

FINISHEDFLOOR

54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS

203 mm(8)

0356.015 8" CTRS FOR WALL HANGER OR CONCEALED ARMS

0356.037 8" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA RIGHT HAND HOLE

NOTES:* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.


VITREOUS CHINA

0356.073 8" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA LEFT HAND HOLE

102 mm(4)

152 mm(6)

152 mm(6)

86 mm(3-3/8)

54mm(2-1/8) 203 mm

(8)

8 mm(5/16)

464 mm(18-1/4)

521 mm(20-1/2)

13 mm(1/2)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

25 mm(1)

79 mm(3-1/8)

267 mm(10-1/2)

425 mm(16-3/4)

114 mm(4-1/2)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES203 mm

(8)

SUPPLIESAS REQUIRED



27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

206 mm(8-1/8)

*286 mm(11-1/4)

298 mm(11-3/8)*

352 mm(13-7/8)*

787mm (31) 864mm (34)

FINISHEDFLOOR


203 mm(8)

165 mm(6-1/2)

102 mm(4)

152 mm(6)

152 mm(6)

86 mm(3-3/8)

54mm(2-1/8)

203 mm(8)

8 mm(5/16)

464 mm(18-1/4)

521 mm(20-1/2)

13 mm(1/2)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

25 mm(1)

79 mm(3-1/8)

267 mm(10-1/2)

425 mm(16-3/4)

114 mm(4-1/2)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES203 mm

(8)

SUPPLIESAS REQUIRED



27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

206 mm(8-1/8)

*286 mm(11-1/4)

298 mm(11-3/8)*

352 mm(13-7/8)*

787mm (31) 864mm (34)

FINISHEDFLOOR


203 mm(8)

165 mm(6-1/2)

Revised 8/05

BARRIER FREE


102 mm(4)

152 mm(6)

152 mm(6)

102 mm(4)

86 mm(3-3/8)

203 mm(8)

8 mm(5/16)

464 mm(18-1/4)

521 mm(20-1/2)

13 mm(1/2)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

25 mm(1)

79 mm(3-1/8)

267 mm(10-1/2)

425 mm(16-3/4)

114 mm(4-1/2)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES203 mm

(8)

SUPPLIESAS REQUIRED



27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

206 mm(8-1/8)

*260 mm(10-1/4)

298 mm(11-3/8)*

352 mm(13-7/8)*

787mm (31)864mm (34)

FINISHEDFLOOR


0355.012 4" CTRS FOR WALL HANGER OR CONCEALED ARMS

0355.034 4" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA RIGHT HAND HOLE





VITREOUS CHINA

0355.056 4" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA LEFT HAND HOLE

102 mm(4)

152 mm(6)

152 mm(6)

102 mm(4)

86 mm(3-3/8)

203 mm(8)

8 mm(5/16)

464 mm(18-1/4)

521 mm(20-1/2)

13 mm(1/2)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

25 mm(1)

79 mm(3-1/8)

267 mm(10-1/2)

425 mm(16-3/4)

114 mm(4-1/2)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES203 mm

(8)

SUPPLIESAS REQUIRED



27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

206 mm(8-1/8)

*260 mm(10-1/4)

298 mm(11-3/8)*

352 mm(13-7/8)*

787mm (31)864mm (34)

FINISHEDFLOOR


54 mm(2-1/8)

165 mm(6-1/2)

102 mm(4)

152 mm(6)

152 mm(6)

102 mm(4)

86 mm(3-3/8)

54 mm(2-1/8) 203 mm

(8)

8 mm(5/16)

464 mm(18-1/4)

521 mm(20-1/2)

13 mm(1/2)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

25 mm(1)

79 mm(3-1/8)

267 mm(10-1/2)

425 mm(16-3/4)

114 mm(4-1/2)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES203 mm

(8)

SUPPLIESAS REQUIRED



27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

206 mm(8-1/8)

*260 mm(10-1/4)

298 mm(11-3/8)*

352 mm(13-7/8)*

787mm (31)864mm (34)

FINISHEDFLOOR


165 mm(6-1/2)

BARRIER FREE


102 mm(4)

152 mm(6)

152 mm(6)

86 mm(3-3/8)

203 mm(8)

8 mm(5/16)

464 mm(18-1/4)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

79 mm(3-1/8)

425 mm(16-3/4)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES

206 mm(8-1/8)

787mm (31)864mm (34)

FINISHEDFLOOR


25 mm(1)

267 mm(10-1/2)

114 mm(4-1/2)

27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER

25mm (1-3/8) DIA.PUNCHING

521 mm(20-1/2)

13 mm(1/2)

44mm (1-3/4) DIA.STD. OUTLET

0356.421 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS

0356.137 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS WITH EXTRA RIGHT HAND HOLE





VITREOUS CHINA

102 mm(4)

152 mm(6)

152 mm(6)

86 mm(3-3/8)

54 mm(2-1/8) 203 mm

(8)

8 mm(5/16)

464 mm(18-1/4)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

79 mm(3-1/8)

425 mm(16-3/4)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES

206 mm(8-1/8)

787mm (31)864mm (34)

FINISHEDFLOOR


25 mm(1)

267 mm(10-1/2)

165 mm(6-1/2)

114 mm(4-1/2)

27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER


521 mm(20-1/2)

13 mm(1/2)


102 mm(4)

152 mm(6)

152 mm(6)

86 mm(3-3/8)

54 mm(2-1/8) 203 mm

(8)

8 mm(5/16)

464 mm(18-1/4)

FINISHEDWALL


FOR CONC. ARMS

102 mm(4)

79 mm(3-1/8)

425 mm(16-3/4)

44 mm(1-3/4)

38 mm(1-1/2)


SCREW HOLES

206 mm(8-1/8)

787mm (31)864mm (34)

FINISHEDFLOOR


25 mm(1)

267 mm(10-1/2)

165 mm(6-1/2)

114 mm(4-1/2)

27mm X 14mm(1-1/16 x 5/16) SLOTS

S-9 HANGER


521 mm(20-1/2)

13 mm(1/2)


0356.115 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS WITH EXTRA LEFT HAND HOLE

BARRIER FREE

Features• With overflow.• 4" (102 mm) centers.• 20-1/8" (511 cm) x 16-1/2" (419 cm)

Material• Vitreous china.

Installation• Drop-in

Recommended AccessoriesK- 7107 Decorative DrainK- 7108 Decorative DrainK- 7129 Drain

CSA B651K- 9018 P-Trap

Codes/StandardsASME A112.19.2/CSA B45.1ADAICC/ANSI A117.1CSA B651

KOHLER® One-Year Limited WarrantySee website for detailed warranty information.

Available Color/FinishesColor tiles intended for reference only.

DescriptionCodeColor

White0

Biscuit96

Almond47

DuneNY

Ice™ Grey95

SandbarG9

Mexican Sand™33

CashmereK4

Thunder™ Grey58

Black Black™7

USA/Canada: 1-800-4KOHLER (1-800-456-4537)Kohler Co. reserves the right to make revisions without notice to product specifications.For the most current Specification Sheet, go to www.kohler.com.3-28-2016 03:38

Bryant®

Bathroom SinkK-2699-4

http://www.kohler.com

16-1/2"

NotesTechnical InformationInstall this product according to the installationguide.

All product dimensions are nominal.Drop-InInstallation:

Spout must be 5" (12.7 cm) long (min) foradequate clearance into the lavatory wheninstalled with the centerline as shown.

Length: 17-3/8" (441 mm)Width: 11-1/8" (283 mm)Water depth: 5-5/8" (143 mm)

Bowl area

Spout must be tall enough to clear 3" (7.6 cm)rim height and provide a 1" (2.5 cm) air gap perASME A112.1.1.

3Number of deck holes:1-1/4" (32 mm)Faucet hole(s):7/8" (22 mm)Drain hole:

NOTICE: Countertop manufacturer or cutter mustuse the cut-out template provided with the

Drop-in, 1155261-7, required, includedTemplate:

product, or a current one provided by Kohler Co.(call 1-800-4-KOHLER). Kohler Co. is notresponsible for cutout errors when the incorrectcut-out template is used.

ADA, CSA B651 compliant when installed to thespecific requirements of these regulations.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)Kohler Co. reserves the right to make revisions without notice to product specifications.For the most current Specification Sheet, go to www.kohler.com.3-28-2016 03:38

Bryant®

Bathroom SinkK-2699-4

http://www.kohler.com

COMPLIES WITH:• ASME A112.18.1 / CSA B125.1• ASME A112.18.2 / CSA B125.2 Indicates compliance to ICC/ANSI A117.1• EPA WaterSense®

• Verified compliant with .25% weighted average Pb content regulations.

lavatory FaUCEtS■ Single Handle■ 3 Hole Sink Applications ■ 4" (102 mm) CentersetSubmitted Model No.: _______________________________________________

Specific Features: __________________________________________________ STANDARD SPECIFICATIONS: • Single handle lavatory deck faucets for exposed mounting on three hole sinks.• 4" (102 mm) centerset.• All metal fabricated body.• 5" (127 mm) spout.• Vandal resistant aerator or spray outlet.• Metal grid strainer (523).• Metal pop-up drain (520).• Lift rod hole (520).• Vandal resistant lever handle. Red/blue colored graphics indicate hot/cold temperature.• Control mechanism is the diamond embedded ceramic disc cartridge.• Control handle shall return to the neutral position when valve is turned off.• Adjustable handle limit stop.• 3/8" O.D. straight, staggered copper supply tubes with 3/8" fittings.• Available options for field conversion: 6" (152 mm) long elbow handle-red/blue colored graphics indicate hot/cold temperature. Order RP54687.

• Maximum 1.5 gpm flowrate @ 60 PSI. HGM (models only) max. 0.5 gpm flowrate @ 60 PSI. TGM (models only) max. 0.35 gpm flowrate @ 60 PSI.

DSP-L-501LF-HDF Rev. C

2" (51 mm) Max. Deck Thickness6 13/32"

(163 mm)

0

1

2

3

4

5

0 10 20 30 40 50 60 70 80 90

Pressure (PSI)

Flo

w (

U.S

. Gal

lon

s P

er M

inu

te) 6

0 69 138 207 276 345 414 483 552 621

0

3.8

7.6

11.4

15.1

18.9

22.7

Pressure (kPa)

Flo

w (L

iters Per M

inu

te)

HGM Models OnlyTGM Models Only

®

®

U P C

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

5"(127 mm)

6 9/16"(167 mm)

1 13/16"(46 mm)

55 E. 111th Street, Indianapolis, Indiana 46280350 South Edgeware Road, St. Thomas, ON N5P 4L1© 2012 Masco Corporation of Indiana

WARRANTy• Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship.• 5 Year Limited Warranty for usage in all industrial, commercial and business applications.

5"(127 mm)

5 5/16"(135 mm)

▲ Designate proper finish suffix

Min. 1 1/2"

(38 mm)Dia. Hole

Size

Min. 2 1/2" (64 mm) Clearanceto Back Splash

501LF-HDF▲501LF-HGMHDF▲501LF-TGMHDF



4" Centers(102 mm)

6 1/2"(165 mm)

Metal Grid Strainer

1 5/8" (42 mm)

to2 3/8"

(61 mm)

2 1/8" (54 mm)

Dia.

1 3/8" (35 mm)

Dia.8"

(203 mm)

1 1/4" (32 mm)

Dia.

3 3/8"(86 mm)

1 3/8"(35 mm) Dia.

1 1/4"(32 mm) Dia.

2 1/8"(54 mm) Dia.

4 5/8"(117 mm)

1 5/8" (41 mm) to2 3/8" (60 mm)

Metal Pop-Up

1″ (25 mm) Max. Deck Thickness

3/8″ (10 mm) Dia.Tubes 10″ (254 mm) Long

1 3/16″ (30 mm)

Dia.

7 13/16″ (198 mm)

8 3/4″ (221 mm)

Max.

4″(102 mm) -6″(152 mm) -8″(203 mm)360 Swing Spout

CL 2 1/16″ (52 mm)

8″ (203 mm) Centers 1/2″-14 NPSM - Adapter Suffix WF Models Only

3/8″ (10 mm)

Dia.

1 1/4″ (32 mm) Max. DeckThickness

7/8″ (22 mm)

Dia.

2″ (51 mm)

Dia.

4 3/4″(121 mm)

A

KITCHEN FAUCETS■ Classic Series■ Single Handle Deck Mount■ 3 and 4 Hole Sink Applications

Submitted Model No.: _______________________________________________Specific Features: __________________________________________________

STANDARD SPECIFICATIONS: • Maximum flow rate 1.8 gpm @ 60 PSI, 6.8 L/min @ 414 kPa.• Solid brass fabricated body.• Standard 8" (203 mm) long spout swings 360°.• Control handle shall return to neutral position when faucet is turned off.• Lever handle. Control mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets.• Model 400 series with spray attachement has anti- siphon device as integral part of valve body.• Model 100 and 400 series without dispenser can be field converted from 8" (203 mm) to 6" (152 mm) centers.• 3/8" O.D. copper tube inlets - 10" (854 mm) long.• Vegetable sprayer hose with chrome sprayhead on model 400 series - 45" (1143 mm) long threaded hose.• Models supplied with 1/2"-14 NPSM adapters.

400LF-WF100LF-WF

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.deltafaucet.com for finish options and product availability.DSP-K-100LF-WF Rev. C

Dimension A1 7/8" (48 mm) -4" (102 mm) Spout (RP5881)3 1/2" (89 mm) -6" (152 mm) Spout (RP9633)5" (127 mm) -8" (203 mm) Spout (Standard)

WARRANTY• Lifetime limited warranty on parts (other than electronic parts and batteries) and inishes; or, for commercial users, for 5 years from the date of purchase. • 5 year limited warranty on electronic parts (other than batteries); or for commercial users, for 1 year from the date of purchase. No warranty is provided on batteries.

55 E. 111th Street, Indianapolis, Indiana 46280350 South Edgeware Road, St. Thomas, Ontario Canada N5P 4L1© 2015 Masco Corporation of Indiana

COMPLIES WITH:• ASME A112.18.1 / CSA B125.1

Indicates compliance to ICC/ANSI A117.1

• Verified compliant with .25% weighted average Pb content regulations.

K174© 2013 AS America Inc. Rev. 5/13

CADET® PRO™ ELONGATED TOILET

❑ 215CA.104•FeaturestheCadet® Flushing System•Vitreouschina•HighEfficiencyToilet(HET),ultra-low consumption(4.8Lpf/1.28gpf),utilizes20% lesswater•MeetsEPAWaterSense®criteria•Tradeexclusivetank•PowerWash®rimscrubsbowlwitheachflush•Robustmetaltriplever&metalshankfillvalve•IncludesEZ-InstallToolsw/colormatchbowlcaps•EverClean®surfaceincluded•3"flushvalve•Fully-glazed2-1/8"trapway•12"(305mm)rough-in•Generous9"x8"watersurfacearea•Chromefinishtripleverissupplied•1,000gMaPScore**at1.28gpf•5yearwarranty

❑ 3517C.101ElongatedBowl❑ 4188A.104Tank

Nominal Dimensions: 767x441x733mm(30-1/8"x17-3/8"x28-7/8")

Fixtureonly,seatandsupplysoldseparately

Alternative Tank Configurations Available:❑ 4188A.154TankcompletewithAquaguardLiner❑ 4188A.155TankcompletewithAquaguardLinerandtripleverlocatedonrightside❑ 4188A.164Tankcompletewithtankcoverlockingdevice❑ 4188A.174TankcompletewithAquaguardLinerandtankcoverlockingdevice❑ 4188A.105Tankcompletewithtripleverlocatedonrightside❑ 4188A.165Tankcompletewithtankcoverlockingdeviceandtripleverlocatedonrightside

Compliance Certifications -Meets or Exceeds the Following Specifications:•ASMEA112.19.2-2008/CSAB45.1-08forVitreousChinaFixtures

•USEPAWaterSense®SpecificationforHETs

CADET® PRO™ ELONGATED TOILET

VITREOUS CHINA

To Be Specified:❏Color:❏White❏Bone❏Linen❏Black❏Seat:#5321.110EverClean®ElongatedSeatwith

SlowCloseSnap-OffHinges❏Supplywithstop:

Certified byIAPMO R&T

NOTES:THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.*DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.

IMPORTANT: DimensionsoffixturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardA112.19.2.Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.

1-1/

16"

(27m

m)

3-5/

8" (

92m

m)

SUPPLYAS

REQ'D

C/L OF OUTLET

6"(152mm)

*8"(203mm)

FINISHED WALL

FINISHED FLOOR

C/L OF SEAT POST HOLES140mm (5-1/2" CENTERS)

7-7/16"(189mm)

13-5/8"(347mm)

8-7/8"(226mm)

30-1/8"(767mm)

18-1/2"(470mm)

15"(381mm)

28-7/8"(733mm)

9-5/8"(244mm)

17-3/8"(441mm)

12"(305mm)

14"(356mm)

** Maximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.

golden apartments complete renovation project …...golden apartments complete renovation project...

Documents