go to asme.org home > technical program...

ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering

http://www.asmeconferences.org/OMAE2011/TechnicalProgramOverview.cfm[2011/05/27 15:20:58]

GO TO ASME.ORG HOME >

Program Overview

Session Schedule

Program-at-a-glance

HotelAccommodations

Venue

Travel Information

Registration

Short Courses

Outreach forEngineers

Letters of Invitation

Author Resources

Publication Schedule

Organizers

Resources

ASME Staff Support

Have questions?Contact us.

AcceptanceNotification, TechnicalContent, etc. Volunteer Organizers

Events, registration, &hotelKIVI NIRIACongresbureau

Copyright [email protected]

Website [email protected]

Technical Program Overview Conference Schedule | Program SearchNote: Program is subject to change.

Collapse All

SYMP 1 Offshore Technology Expand All Sessions In Symposia

Symposium Coordinator: Dominique Roddier, Marine Innovation &Technology

1-1 Floating Platforms I (Technical Session)

Session Description:This session focus on element of design and engineering specific tofloating structures.

Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Steve Leverette, SBM Atlantia Session Co-Chair: jonas ringsberg, Chalmers University of Technology OMAE2011-50216 Optimization of Corrugated Shell Plating

for Marine StructuresTechnicalPublication

OMAE2011-49411 Effects Of The Coupled Hydrodynamic inThe Performance Of A DP BargeOperating Close To A FPSO

TechnicalPublication

OMAE2011-49949 INVESTIGATION ON THE EFFECTS OFCURRENT IN THE DYNAMICS OFFLOATING SYSTEMS


OMAE2011-49125 A study on Dynamic Behabior ofOffshore Structures under the Blast Load


1-2 Floating Platforms II: Semi-Submersibles (Technical Session)

Session Description:This session focuses on design and analysis of semi-submersibles

Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: John Murray, FloaTEC Session Co-Chair: Xiao-Bo Chen, bureau veritas OMAE2011-49729 Dry and Wet Tree Damper Chamber

Column Semisubmersible Design inHarsh Environment


OMAE2011-49271 Wave Run-up Simulations with a MovingLarge Volume Semi-SubmersiblePlatform


OMAE2011-49088 Analysis of Free Vibration Characteristicsand Mode Shapes of a SemisubmersiblePlatform


OMAE2011-49118 A New Semisubmersible Design forImproved Heave Motion and Vortex-induced Motion Performance


1-3 Floating Platform III:Vertical Cylindrical Structures (Spars) (TechnicalSession)

Session Description:

Home Technical Program Author Center Meeting Information Help Login

http://www.asme.org/

http://www.asmeconferences.org/OMAE2011/ConferenceSchedule.cfm

http://www.asmeconferences.org/OMAE2011/ProgramataGlance.cfm

http://www.asmeconferences.org/OMAE2011/HotelInfo.cfm

http://www.asmeconferences.org/OMAE2011/HotelInfo.cfm

http://www.asmeconferences.org/OMAE2011/Venue.cfm

http://www.asmeconferences.org/OMAE2011/TravelInfo.cfm

http://www.kiviniria.net/omae2011

http://www.asme-ipti.org/ipti-courses-at-omae/

http://www.asmeconferences.org/OMAE2011/Outreach.cfm

http://www.asmeconferences.org/OMAE2011/Outreach.cfm

http://www.asmeconferences.org/OMAE2011/InvitationLetters.cfm

http://www.asmeconferences.org/OMAE2011/AuthorResources.cfm

http://www.asmeconferences.org/OMAE2011/PublicationSchedule.cfm

http://www.asmeconferences.org/OMAE2011/Organizers.cfm

http://www.asmeconferences.org/OMAE2011/Resources.cfm



mailto:[email protected]




http://www.asmeconferences.org/OMAE2011/ConferenceSchedule.cfm

http://www.asmeconferences.org/OMAE2011/SearchPaperSchedule.cfm



This session focuses on design and analysis of spars, DDCV, andcylindrical shaped platforms.

Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Anil Sablok, Technip Session Co-Chair: Alexia Aubault, Marine Innovation & Technology OMAE2011-49272 A Comparison of Radial Wellbay and

Traditional Truss Spar DesignsTechnicalPublication

OMAE2011-49310 EXPERIMENTAL STUDY ON WET TOWAND UPENDING OF A TRUSS SPAR


OMAE2011-50223 Motion Reduction for Spar Platform withHydro-pneumatic Tensioners


OMAE2011-49413 DYNAMIC RESPONSE OF SPAR ININTERNAL SOLITARY WAVES


OMAE2011-49673 NONLINEAR DYNAMIC RESPONSE OFFULLY COUPLED SPAR PLATFORMUNDER RANDOM LOADS

TechnicalPresentationOnly

1-4 Fixed Platforms (Technical Session)

Session Description:This session focuses on jackets, jack ups, and bottom founded platforms.

Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Partha Chakrabarti, Zentech, Inc. Session Co-Chair: Bogdan Iwanowski, FORCE Technology Norway AS OMAE2011-50041 The performance study of Jack-Up

Platform with different leg formTechnicalPublication

OMAE2011-50251 Fast Prediction of Fixed Offshore JacketPlatforms Response to Random WaveLoads


OMAE2011-49718 Operational scour management for safejack-up operations


OMAE2011-49816 Structural health monitoring (SHM) ofoffshore jacket platforms


OMAE2011-49910 35 Years Old Jackets Removed As ASingle Piece


1-5 Mooring and Anchoring I (Technical Session)

Session Description:This session focuses on elements of design and analysis of mooringsystems

Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Flavia Rezende, Bureau Veritas

Session Co-Chair: Antonio C. Fernandes, Federal University of Rio deJaneiro

OMAE2011-49237 SQUALL RESPONSE BASED DESIGN OFFLOATING UNITS IN WEST AFRICA


OMAE2011-50280 A Nonlinear Viscoelastic Model forPolyester Mooring Line Analysis


OMAE2011-49080 Aided Inertial Measurement SystemApplied To Torpedo Pile´s TrajectoryReconstruction


OMAE2011-49206 Effects of twist on chain strength andfatigue performance: small scale testresults


1-6 Mooring and Anchoring II (Technical Session)



Session Description:This session focuses on elements of design and analysis of mooringsystems

Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors:

Session Chair: Vikas Jhingran, Shell Exploration and ProductionInternational

Session Co-Chair: Erik Falkenberg, DNV OMAE2011-49038 An Experimental Investigation Into the

Pull-Out Capacity of Suction Caissons inSand


OMAE2011-49436 POSITIONING OF THE OFFSHOREPLATFORM


OMAE2011-49633 Modeling the Dual Crane Lift of MaerskBD Module


OMAE2011-49723 Global Performance of Synthetic RopeMooring Systems - Frequency DomainAnalysis


1-7 Subsea Systems I (Technical Session)

Session Description:This session focuses on the engineering of components placed on thebottom of the ocean.

Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Howard Wang, ExxonMobil Development Company Session Co-Chair: Shan Shi, Houston Offshore Engineering OMAE2011-49199 Subsea Hydrocarbon Processing and

Treatment - Twister SubseaTechnicalPublication

OMAE2011-49795 A Methodology for Assessment ofInternal Flow-Induced Vibration (FIV) inSubsea Piping Systems


OMAE2011-49948 NUMERICAL ANALYSIS OF A NOVELMETHOD FOR SUBSEA EQUIPMENTINSTALLATION


OMAE2011-50026 Wellhead Fatigue Analysis Method TechnicalPublication

1-8 Subsea Systems II (Technical Session)

Session Description:This session focuses on the engineering of components placed on thebottom of the ocean.

Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Shan Shi, Houston Offshore Engineering Session Co-Chair: Howard Wang, ExxonMobil Development Company OMAE2011-49381 Fatigue And Environmental Loading Of

Large-Bore Manifold PipingTechnicalPublication

OMAE2011-49351 New Approach Of Deep Sea Dredging TechnicalPublication

OMAE2011-49030 Natural convection - subsea cooling;theory, simulations, experiments anddesign


1-9 Drilling • Risers and Flow assurance (Technical Session)

Session Description:This session deals with the technical challenges related to risers andflowlines.



Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: oriol rijken, SBM Atlantia Session Co-Chair: Peter Young, Peritus International OMAE2011-49191 Challenging the Need for Dual Flowline

Systems Using Emerging HydrateRemediation Intervention Technology


OMAE2011-50303 New Design Configuration of SteelCatenary Risers with Pull-tube for Spars


OMAE2011-49778 Vertical Position Control for TopTensioned Riser with Active HeaveCompensator


OMAE2011-49550 DESIGN OPTIMIZATION OF TOP-TENSIONED RISERS FOR DEEPWATERHPHT APPLICATIONS (PART II)


1-10 Offshore Field Development (Technical Session)

Session Description:This session reports on the challenges related to the development of anoffshore field.

Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Denby Morrison, Shell International E&P Session Co-Chair: Neil Williams, Wison Floating Systems OMAE2011-49183 Uncertainties, risks, and opportunities in

development of hydrocarbon fieldsTechnicalPublication

OMAE2011-49286 Strategy Of The Kara Sea Oil And GasField Development And Evaluation OfEconomy Uncertainties


OMAE2011-49978 Evaluation of Alternatives for OffshorePetroleum Production System in Deepand Ultradeep Water Depth


OMAE2011-50342 An Innovative Self-Installing Platform(SIP) Concept


OMAE2011-49157 Oil Pollution in the Arctic - Risks andMitigating Measures, with reference tothe Deepwater Horizon accident


1-11 Installation - Commissioning I (Technical Session)

Session Description:This session deals with paper related to the installation andcommissioning of offshore platforms.

Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Charlotte van de Kerk, The Offshore Partners B.V. Session Co-Chair: Anil Sablok, Technip OMAE2011-49168 Large Marine Lifts In Shallow Water Technical

Publication OMAE2011-49227 SUBMERGED TOWING PERFORMED BY

A MONOHULL VESSELTechnicalPublication

OMAE2011-49273 Statistical Characterization of Slackingand Snap Loading during OffshoreLifting and Lowering in a WaveEnvironment


OMAE2011-49394 Offshore use of floating sheerlegs TechnicalPublication

1-12 Installation - Commissioning II (Technical Session)



Session Description:This session deals with paper related to the installation andcommissioning of offshore platforms.

Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Neil Williams, Wison Floating Systems Session Co-Chair: oriol rijken, SBM Atlantia OMAE2011-50167 Installation of a Submerged Buoy for

Supporting Riser System (BSR) in aCampos Basin Site


OMAE2011-49944 Development of a Prototype Test Rig fora Cryogenic, Marine, Heavy Lift,Buoyancy System


OMAE2011-49688 The Application of Super-CapacitorsBased Energy Storage Systems onHeave Compensation Systems forOffshore Lifting Equipment.


OMAE2011-50327 "Detailed Analyses of the Tow LineBehaviour in Single, Double and TripleTowages in Case of Emergency Stop andCatenary"


1-13 Station Keeping (Technical Session)

Session Description:The papers in these session will focus on design and analysis of DPsystems, and ship to ship in close proximity.

Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Hans Cozijn, MARIN Session Co-Chair: Krish Thiagarajan, The University of Western Australia OMAE2011-50010 NUMERICAL & EXPERIMENTAL TOOLS

FOR OFFSHORE DP OPERATIONSTechnicalPublication

OMAE2011-49144 Current Feed Forward Control inDynamic Positioning


OMAE2011-49406 Prediction of Supply Vessel MotionDuring Transfer to a Fixed Structure


OMAE2011-49116 A Generic Optimization Algorithm for theAllocation of DP Actuators


1-14 Offshore Technical Challenges I (Technical Session)

Session Description:This opening session has papers describing the technical challenges ourindustry is facing today.

Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors:

Session Chair: Alexandre N. Simos, Numerical Offshore Tank, University ofSão Paulo

Session Co-Chair: Denby Morrison, Shell International E&P OMAE2011-50352 Past, Current and Future Offshore

ChallengesKeynote

OMAE2011-49285 A New Interpolation Method for FPSOMotion and Wave Drift Load TransferFunctions


OMAE2011-50181 Experimental Investigation of FlowInduced Rotation of Hinged Plates withShapes to Avoid Fluttering


OMAE2011-50283 Numerical Wave Tank Analysis of Air Technical



Gap on a Truncated Vertical Cylinder Publication 1-15 Offshore Technical Challenges II (Technical Session)

Session Description:This session has papers describing the technical challenges our industry isfacing today.

Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Antonio C. Fernandes, Federal University of Rio de Janeiro Session Co-Chair: Mamoun Naciri, Single Buoy Moorings OMAE2011-49414 A Multi-domain Approach in 3-d

Diffraction CalculationsTechnicalPublication

OMAE2011-49174 Assessing Hydrodynamic Behavior duringOffshore Loading and Discharge in theHeave Marine Transport


OMAE2011-50218 AN EFFICIENT TIME-FREQUENCYDOMAIN SOLUTION PROCEDURE FORTHE ANALYSIS OF OFFSHORE SYSTEM


OMAE2011-49223 Comparative Study of SeakeepingAnalysis Results from Various Methods


1-16 Hydrodynamics I (Technical Session)

Session Description:This session has papers discussing the solution of hydrodynamic problemsrelated to offshore applications

Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Mamoun Naciri, Single Buoy Moorings Session Co-Chair: Jan Van Kessel OMAE2011-49621 Unstable Motion of a Floating Structure

in Surface WavesTechnicalPublication

OMAE2011-49829 Wave interaction with an infinite longhorizontal elliptical cylinder


OMAE2011-49565 Influence of Heave Plate on theHydrodynamic Response of SPAR


OMAE2011-49823 Hydrodynamic behaviour of MobileOffshore Base


1-17 Hydrodynamics II (Technical Session)


Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Bernt J. Leira, NTNU Session Co-Chair: Jang Whan Kim, Technip OMAE2011-50304 Study of Nonlinear Internal Waves and

Impact on Offshore Drilling UnitsTechnicalPublication

OMAE2011-50182 Investigation of the Flow Induced SmallAmplitude Rotation of a Flat PlateSubmitted Uniform Current Based on theStreamline Theory


OMAE2011-49751 Hydrodynamic Loading on Mid WaterArch Structures


OMAE2011-49586 The Research of Moonpool Size Effecton the Hydrodynamic Performance ofFDPSO




1-18 Hydrodynamics III (Technical Session)


Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Bill Webster, University of California, Berkeley Session Co-Chair: Longbin Tao, Newcastle University OMAE2011-50002 Wet tree semi-submersible with SCRs for

4000 ft Water Depth in the Gulf ofMexico


OMAE2011-49553 Coupled Dynamic Modeling of a MooredFloating Platform with Risers


OMAE2011-49700 Performance Analysis of a SemicircularFree Surface Breakwater


OMAE2011-49025 Noise and Vibration Prediction for Semi-submersible Drilling Rig


1-19 Wave Dynamics and Wave Loading (Technical Session)

Session Description:This session focuses on papers that discuss wave modeling and wave-structure interactions

Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors:

Session Chair: Pierre Ferrant, Laboratoire de Mécanique des Fluides(CNRS UMR 6598), Ecole Centrale Nantes

Session Co-Chair: Bernt J. Leira, NTNU OMAE2011-49487 Tsunami Bore Forces on Walls Technical

Publication OMAE2011-49480 Evaluation of an extended operational

Boussinesq-type wave model forcalculating low-frequency waves inintermediate depths


OMAE2011-50110 High Frequency Loading and Responseof Offshore Structures in Steep Waves


OMAE2011-49515 CFD Calculations of Wave-In-Deck Loadon a Jacket Platform, Impact PressureDecrease due to Air Pocket Formation


1-20 Impact loadings (Technical Session)

Session Description:This session focuses on papers discussing the impact loading onstructures to to large waves; either internal (sloshing) or external(slamming).

Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors:

Session Chair: Zhenjia (Jerry) Huang, ExxonMobil Upstream ResearchCompany

Session Co-Chair: Fabrizio Pistani, University of Western Australia OMAE2011-49992 Full and large scale wave impact tests

for a better understanding of sloshing -results of the Sloshel project


OMAE2011-49452 Comparison of sloshing impacts forrectangular and chamfered LNG tanks


OMAE2011-49976 Breaking Wave Impact On A PlatformColumn: An Introductory CFD Study


1-21 Ships and Ship Dynamics I (Technical Session)



Session Description:This session focuses on the challenges associated with the prediction ofship motions and ship dynamics.

Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Ronald W. Yeung, University of California at Berkeley

Session Co-Chair: Pierre Ferrant, Laboratoire de Mécanique des Fluides(CNRS UMR 6598), Ecole Centrale Nantes

OMAE2011-49921 ‘Wet Handshake’, Workability Study OfAn Offshore Thruster ExchangeOperation


OMAE2011-50107 Validation of Shiphandling SimulationModels


OMAE2011-50274 Organic Boats and Rhibs – Meeting NewDemands


OMAE2011-50301 Calculations on the oil film between apropeller shaft and the aft sterntubebearing


1-22 Ships and Ship Dynamics II (Technical Session)

Session Description:This session focuses on the challenges associated with the prediction ofship motions and ship dynamics.

Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Jang Whan Kim, Technip Session Co-Chair: Haiping He, ExxonMobil Upstream Research Company OMAE2011-49043 Assessing the Dynamic Stability of an

OSVTechnicalPublication

OMAE2011-49106 Hull Strength Design For A FloatingProduction Unit Using Long TermHydrodynamic Response


OMAE2011-49207 Dynamic Modeling of Underway Ship-to-Ship Operations


OMAE2011-49753 How The Offshore Industry Can BenefitFrom Developments In The DredgingWorld


1-23 Metocean (Technical Session)

Session Description:This session has papers focusing on the prediction of wind, waves andcurrents.

Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: George Forristall, Forristall Ocean Engineering, Inc. Session Co-Chair: Antoine Peiffer, Marine Innovation & Technology OMAE2011-49052 A Gust Factor Model For Storm Winds Technical

Publication OMAE2011-49066 How to carry out metocean studies Technical

Publication OMAE2011-49219 WIND AND WAVE STUDY FOR OFF-

SHORE WIND FARM APPLICATIONSTechnicalPublication

OMAE2011-49580 Equivalent Design Wave Approach ForCalculating Site-Specific EnvironmentalLoads On An FPSO


1-24 LNG Challenges (Technical Session)Session Description:



This session has papers discussing the various challenges associated withthe transport Liquid Natural Gas. Topics of current interest are cryogenichoses, tank sloshing and FSRU / FLNGs.

Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Krish Thiagarajan, The University of Western Australia Session Co-Chair: Hannes Bogaert, MARIN, Hydro Structural Services OMAE2011-49222 Qualification of multi-composite hoses

for STS LNG transferTechnicalPublication

OMAE2011-49244 Numerical and ExperimentalInvestigation on HydrodynamicCharacteristics of FLNG with Account ofthe Inner-tank Sloshing


OMAE2011-49534 Numerical Sloshing Analysis of FLNG andLNGC considering Two-body MotionEffect


OMAE2011-50132 Hydrodynamic Considerations for FLNGConcepts


1-25 QA/QC, Global Processes, Optimisations and environmentalchallenges of Offshore Projects (Technical Session)

Session Description:This session has paper focusing on the various aspects of monitoring anoffshore project.

Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Kostas Lambrakos, Technip USA, Inc.

Session Co-Chair: Richard D. Schachter, Universidade Federal do Rio deJaneiro - UFRJ

OMAE2011-49404 Compilation of a Software Manual FacingComplex Activities in the Oil & GasSector


OMAE2011-49787 Development of Biomimetic underwatervehicle for offshore investigation


OMAE2011-50135 Development of a Computer Program forthe Optimization of DeckAccommodation Arrangements of Shipsand Craft Applying GRASP and VNSMeta-heuristics Methods


SYMP 2 Structures, Safety and Reliability Expand All Sessions In Symposia

Symposium Coordinator: Carlos Guedes Soares, Technical University ofLisbon

2-11 Probabilistic Response Modelling I (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Arvid Naess, CeSOS/NTNU Session Co-Chair: Luis Sagrilo, COPPE/UFRJ OMAE2011-49357 Safety Level of a Probabilistic

Admittance PolicyTechnicalPublication

OMAE2011-49278 Airgap on Semi-Submersibles, APractical Guide on the Implementation ofa Stochastic approach


OMAE2011-49507 Wave slam/slap loads on the structuralmembers in the air-gap


OMAE2011-49588 Prediction of Airgap Statistics for FixedOffshore Platforms




2-12 Probabilistic Response Modelling II (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Ying Min Low, Nanyang Technological University Session Co-Chair: Arvid Naess, CeSOS/NTNU OMAE2011-50014 Response of a Spar Platform under the

Occurrence of Extreme WavesTechnicalPublication

OMAE2011-49458 Efficient Derivation of the ProbabilityDistribution of the Extreme Values ofOffshore Structural Response TakingAdvantage of its Correlation withExtreme Values of Linear Response


OMAE2011-49460 Long-term Distribution of the ExtremeValues of Offshore Structural Responseby Finite-memory Nonlinear SystemModelling


OMAE2011-49867 Extremes of Nonlinear Vibration: ModelsBased on Moments, L-Moments, andMaximum Entropy


OMAE2011-49952 Some Bivariate Extreme ValueDistributions for Marine ReliabilityAssessment


2-13 Probabilistic Response Modelling III (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Luis Sagrilo, COPPE/UFRJ Session Co-Chair: Arvid Naess, CeSOS/NTNU OMAE2011-49456 ASSESSMENT OF FULL-SCALE

MEASUREMENTS WITH REGARD TOEXTREME HOGGING AND SAGGINGCONDITION OF CONTAINER SHIPS


OMAE2011-49486 Dynamics And Hydrodynamics Of AMoored Floating Rectangular StructureUnder The Action Of Random SeaWaves


OMAE2011-49770 Metocean Design Criteria for PipelineOn-Bottom Stability


OMAE2011-49866 Turkstra Profiles of North Sea Currents:Wider Than You'd Think


2-14 Reliability of Marine Structures I (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Organizer: Sang-Rai Cho, University of Ulsan Session Co-Chair: Alberto Morandi, American Global Maritime Inc. OMAE2011-49735 RELIABILITY-BASED ANALYSIS AND

DESIGN OF A SHIP HULL BEAM WITHTHE SIMPLIFIED LOAD AND STRENGTHMODELS


OMAE2011-50162 Potential Impact of Climate Change onTanker Design


OMAE2011-50331 Assessing Structural Safety of Inner HullStructure Under Cryogenic Temperature


OMAE2011-49950 Efficient System Reliability Analysis byFinite Element Structural Models


2-15 Reliability of Marine Structures II (Technical Session)



Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Alberto Morandi, American Global Maritime Inc. Session Co-Chair: Sang-Rai Cho, University of Ulsan OMAE2011-50272 Practical Methods for Assessing the

Reliability of Mooring SystemsTechnicalPublication

OMAE2011-49844 Offshore reliability approach for floatingrenewable energy devices


OMAE2011-49951 The Effect of Possible Spud-Can Punch-Through on The Reliability Index ofNeka Drilling Type Jack-up Platform


OMAE2011-50350 Probabilistic and Deterministic Approachto the Setting of In-Line InspectionIntervals


2-16 Reliability of Marine Structures III (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Bernt Leira, NTNU Session Co-Chair: Lance Manuel, University of Texas at Austin OMAE2011-49596 Analysis of Ice Loads on Offshore

Structures for Okhotsk Sea Oil&GasFields


OMAE2011-50345 Integrity Assessment, Repair andVerification of Fitness for Service of aDamaged Offshore Platform RadioTower


OMAE2011-50349 API 579 Level 3 Assessment of DentsUsing High-Resolution ILI Data


OMAE2011-50030 Fatigue Reliability and SensibilityAnalysis of Semi-submersible DrillingPlatform


2-17 Reliability of Marine Structures IV (Technical Session) Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Lance Manuel, University of Texas at Austin Session Co-Chair: Bernt Leira, NTNU OMAE2011-50133 Structural Reliability Applications In

Design And Maintenance Planning OfShips Hull Structures Subjected ToFatigue And Corrosion


OMAE2011-49666 Reliability Assessment of Spar Mooringsagainst Ultimate Load Failure


OMAE2011-49897 Collisions between platforms and shipsin Norway in the period 2001-2010


OMAE2011-49467 Conditional Risk Assessment ConsideringHull Girder Failure of Vessels withCollision-induced Damage Amidships


2-18 Fracture & Fatigue Reliability I (Technical Session) Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Organizer: Ying Min Low, Nanyang Technological University Session Co-Organizer: jonas ringsberg, Chalmers University of Technology OMAE2011-49123 FATIGUE LIFE ESTIMATION OF WELDED

JOINTS INCLUDING THE EFFECTS OFCRACK CLOSURE PHENOMENA




OMAE2011-49349 A Study on Construction of EvaluationMethod for Defect Sizing UtilizingNumerical Simulation


OMAE2011-49737 STUDY ON THE HOT SPOT STRESSDISTRIBUTION AT MULTI-PLANARTUBULAR KK JOINTS UNDER AXIALLOADS


OMAE2011-49004 Crystal Plasticity Analysis of CyclicSoftening Behavior underMacroscopically Elastic Condition


2-19 Fracture & Fatigue Reliability II (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: jonas ringsberg, Chalmers University of Technology Session Co-Chair: Ying Min Low, Nanyang Technological University OMAE2011-49107 Fatigue Behavior of CHS Joints

Fabricated Using Enhanced Partial JointPenetration Welds


OMAE2011-49201 A Damage Mechanics Finite ElementSimulation of a Fracture MechanicsExperiment for S690 Steel


OMAE2011-49314 Effect of Low Cycle Fatigue Damage onUltimate Strength of Aged ShipStructures


OMAE2011-49378 FULL SCALE MEASUREMENTS OFFATIGUE AND EXTREME LOADINGINCLUDING WHIPPING ON AN 8600TEUPOST PANAMAX CONTAINER VESSEL INTHE ASIA TO EUROPE TRADE


OMAE2011-49658 Experimental Study on Fatigue Strengthof Welded Joints under Storm Loading


2-20 Fracture & Fatigue Reliability III (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: jonas ringsberg, Chalmers University of Technology Session Co-Chair: Ying Min Low, Nanyang Technological University OMAE2011-49343 A Fatigue Design for Large Container

Ship Taking Long-Term EnvironmentalCondition Into Account


OMAE2011-49758 Direct calculation of fatigue damage ofship structure details


OMAE2011-49350 Evaluation of premature failure of linksin the docking system of a FPSO


OMAE2011-49880 Fatigue analysis of a Steel CatenaryRiser with uncertain seabed parameters


2-21 Fracture & Fatigue Reliability IV (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Bernt Leira, NTNU Session Co-Chair: Oistein Hagen, Det Norske Veritas AS OMAE2011-49079 Study on the equivalent wave approach

for the fatigue assessment of shipstructures


OMAE2011-50092 Short-term Fatigue Analysis of Semi-submersible Wind Turbine Tower




OMAE2011-49687 Fatigue reliability assessment of CoupledSpar-mooring system


OMAE2011-49143 Fracture Reliability of Jack-up Platformsunder Extreme Environmental Loads


2-22 Probabilistic and Spectral Wave Models (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors:

Session Organizer: Alexander Babanin, Swinburne University ofTechnology

Session Co-Chair: kevin Ewans, Metocean Engineer OMAE2011-49924 SPACE-TIME WAVES AND SPECTRA IN

THE NORTHERN ADRIATIC SEA VIA AWAVE ACQUISITION STEREO SYSTEM


OMAE2011-49957 An Experimental Study of Shallow WaterWave Statistics on Mild Bed Slopes


OMAE2011-49716 A Bayesian-Hierarchical Space-Timemodel for significant wave height data


OMAE2011-49409 Correction for Bias in Return Values ofWave Heights Caused by HindcastUncertainty


OMAE2011-49421 Interval Estimation of Return WaveHeight for Marine Structural Design


2-23 Extreme and Freak Waves (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Ning Ma, Shanghai Jiao Tong University

Session Co-Organizer: Felice Arena, Mediterranea University of ReggioCalabria

OMAE2011-50320 Functional Data Analysis and WaveProfiles During a Storm


OMAE2011-49048 Space-Time Extremes of Storm Seas TechnicalPublication

OMAE2011-49540 Modulational Instability in DirectionalWave Fields, and Extreme Wave Events


OMAE2011-50079 Numerical Simulation on NonlinearEvolution of Rogue Waves on CurrentsBased on the NLS Equation


2-24 CresT I (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Bas Buchner, MARIN Session Co-Chair: kevin Ewans, Metocean Engineer OMAE2011-49846 New insights in extreme crest height

distributions (a summary of the CresTproject)


OMAE2011-49731 Modeling Very Extreme Sea States(VESS) in Real and Synthetic DesignLevel Storms


OMAE2011-49837 Maximum Crest Heights Under a ModelTLP Deck


OMAE2011-50168 EXAMINING A COMPREHENSIVEDATASET CONTAINING THOUSANDS OFFREAK WAVE EVENTS. PART 1 -DESCRIPTION OF THE DATA ANDQUALITY CONTROL PROCEDURE.




2-25 CresT II (Technical Session) Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: kevin Ewans, Metocean Engineer Session Co-Chair: Janou Hennig, MARIN OMAE2011-50169 EXAMINING A COMPREHENSIVE

DATASET CONTAINING THOUSANDS OFFREAK WAVE EVENTS. PART 2 -ANALYSIS AND FINDINGS.


OMAE2011-49982 How quartet resonance might or mightnot amplify large waves into freak waves


OMAE2011-50100 Wave Statistics in Nonlinear Sea States TechnicalPublication

OMAE2011-50199 EXTREME LOAD-RESPONSEMECHANISMS OF A TENSION LEGPLATFORM DUE TO LARGER WAVECRESTS – SOME RESULTS OF THE‘CREST’ JIP


OMAE2011-50112 Reliability Assessment for TLP TetherOverload in Nonlinear Waves


OMAE2011-50153 Reliability Assessment of TLP Air-gap inNonlinear Waves


2-26 Extreme Seas I (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Organizer: Elzbieta Maria Bitner-Gregersen, Det Norske Veritas AS

Session Co-Organizer: Alexander Babanin, Swinburne University ofTechnology

OMAE2011-49198 Probability of occurrence of extremewaves in three dimensional mechanicallygenerated random wave fields: acomparison with numerical simulations


OMAE2011-49545 FORMATION OF EXTRAORDINARILYHIGH WAVES IN SPACE AND TIME


OMAE2011-50313 Statistics and Distributions of WaveHeights, Crests and Troughs FromBimodal Crossing Seas Influenced byThird Order Nonlinearities


OMAE2011-50314 Reconstruction of extreme eventsthrough numerical simulations


2-27 Extreme Seas II (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Elzbieta Maria Bitner-Gregersen, Det Norske Veritas AS Session Co-Chair: Felice Arena, Mediterranea University of Reggio Calabria OMAE2011-49940 Influence of Wave Group Characteristics

on Loads in Severe SeasTechnicalPublication

OMAE2011-50317 Statistics of Non-Gaussian Wave GroupsGenerated in an Offshore Wave Basin


OMAE2011-50214 Application of Regional FrequencyAnalysis for Identification ofHomogeneous Regions of Design WaveConditions Offshore Portugal


OMAE2011-50296 Forecasting and Hindcasting RogueWaves

TechnicalPresentation



Only 2-28 Collision and Crashworthiness (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Sang-Rai Cho, University of Ulsan Session Co-Chair: george wang, ABS OMAE2011-49056 A study on the effect of plating

stiffeners of double bottom during shipgrounding with large contact surface


OMAE2011-49445 Assessment of hydrocarbon explosionand fire risks in offshore installations:Recent advances and future trends


OMAE2011-49081 What can we learn from uncertaintyanalysis with respect to survivability ortime to capsize of a ship struck incollision?


OMAE2011-49468 The effect of Sloshing in Tanks onMotions and Hull Girder Responses ofDamaged Vessels


2-29 Ultimate strength I (Technical Session) Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Jeom Paik, Pusan National University Session Co-Chair: Philippe Rigo, University of Liege, ANAST OMAE2011-49099 Determination of Critical Factors for the

Strength Assessment of Damaged SteelShip Structures


OMAE2011-49055 The Effects of Shape, Thickness andBoundary Imperfections on PlasticBuckling of Cones


OMAE2011-49214 Effect of Geometric Imperfection onPlastic Collapse of Offshore Pipeline


OMAE2011-49415 Ultimate strength of semi-submersibleplatform using nonlinear finite elementmethod


2-30 Ultimate strength II (Technical Session) Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Philippe Rigo, University of Liege, ANAST Session Co-Chair: Sang-Rai Cho, University of Ulsan OMAE2011-50293 Experimental Study on the Collapse

Strength of Narrow Stiffened PanelsTechnicalPublication

OMAE2011-49650 Buckling Strength of Damaged StiffenedPanels


OMAE2011-49919 Influence of Transverse Cracks onUltimate Strength of a Steel Plate underCompression


OMAE2011-49980 ULTIMATE CAPACITY BEHAVIOR OFPITTED MILD STEEL PLATES UNDERBIAXIAL COMPRESSION


2-31 Ultimate strength III (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Jeom Paik, Pusan National University



Session Co-Chair: Philippe Rigo, University of Liege, ANAST OMAE2011-49104 Tripping Analysis and Design

Consideration of Permanent Means ofAccess Structure


OMAE2011-50294 Comparison of Numerical Result withExperiment on Ultimate Strength of LongStiffened Panel


OMAE2011-49161 Effect of initial imperfections on thestrength of restrained plates


OMAE2011-50152 A Benchmark Study of ISO TS 18072-2on the Stiffened Panel Ultimate Strength


OMAE2011-49617 Investigation into Post-Ultimate StrengthBehavior of Ship’s Hull Girder inAnalytical Solution


2-33 Structural Analysis and Optimisation I (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Paulo Mauricio Videiro, PETROBRAS Session Co-Chair: jonas ringsberg, Chalmers University of Technology OMAE2011-49337 Improvements of Beam Structural

Modelling in Hydroelasticity of UltraLarge Container Ships


OMAE2011-49346 A whole ship finite element analysis withthe input of nonlinear wave loads in theirregular and multi-directional waves


OMAE2011-49762 On the axial-flexural-torsional couplingof underwater slender cylinders


OMAE2011-50071 Structural condition identification withvibration measurements for freespanning subsea pipelines: experimentalverification


2-34 Structural Analysis and Optimisation II (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: jonas ringsberg, Chalmers University of Technology Session Co-Chair: Paulo Mauricio Videiro, PETROBRAS OMAE2011-49134 ON THE SIMPLIFIED ANALYSIS OF

SQUARE PLATES WITH HOLESTechnicalPublication

OMAE2011-49228 DUCTILE FAILURE LIMIT STATE DESIGNOF HIGH STRENGTH STEEL TENSIONMEMBERS WITH LARGE STRESSCONCENTRATIONS


OMAE2011-49828 EXPERIMENTAL STUDY ON STRESSCONCENTRATION FACTOR FORTUBULAR KK-JOINTS


OMAE2011-50170 The Global Secant Relaxation-BasedAccelerated Iteration Procedure forSolution of Nonlinear Finite ElementEquation Systems of Offshore StructuralMechanics Problems


2-35 Structural Analysis and Optimisation III (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Paulo Mauricio Videiro, PETROBRAS Session Co-Chair: Sang-Rai Cho, University of Ulsan



OMAE2011-49239 Sensitivity of plastic response ofdefective pipeline girth welds to thestress-strain behaviour of base and weldmetal


OMAE2011-49496 Monitoring of Free Spanns of SubseaPipelines Using Strain Measurements


OMAE2011-49653 Strength Analysis for a Spar in the Load-out Operation Process


OMAE2011-50335 Factoring to Improve Conservatism ofthe Drag-Inertia Method WhenDetermining Dynamic Amplification ofJackup Units


2-36 Structural Analysis and Optimisation IV (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Sang-Rai Cho, University of Ulsan Session Co-Organizer: Paulo Mauricio Videiro, PETROBRAS OMAE2011-49601 BUCKLING ANALYSIS OF OFFSHORE

JACKETS IN REMOVAL OPERATIONSTechnicalPublication

OMAE2011-49005 Case study for fixed offshore platformFailure in Gulf of Suez


OMAE2011-49176 Seismic Performance Evaluation of FixedSteel Jacket Platforms Retrofitted withBuckling Restrained Braces.


OMAE2011-50053 Dynamic Behavior of Jacket TypeOffshore Platform Using IncrementalDynamic Analysis, the Effect of FloatOver Deck Installation


2-37 Structural Analysis and Optimisation V (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Philippe Rigo, University of Liege, ANAST

Session Co-Chair: Mohamed A. El-Reedy, Gulf of suez petroleum company(maadi-projects)

OMAE2011-49001 Identification of excitation and reactionforces spectra for offshore structuresusing neural networks


OMAE2011-49259 Permanent Means of Access StructureDesign using Multi-ObjectiveOptimization


OMAE2011-49266 A Rational Approach to Automated Preand Post Processing of OffshoreStructure Global Strength Finite ElementAnalysis


OMAE2011-49333 Explosion Simulations/Structural AnalysisWith FLACS And USFOS


2-38 Structural Analysis and Optimisation VI (Technical Session) Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors:

Session Chair: Mohamed A. El-Reedy, Gulf of suez petroleum company(maadi-projects)

Session Co-Chair: Philippe Rigo, University of Liege, ANAST OMAE2011-49051 Application of a Mobile Submerged Tank

to Reduce Responses of Fixed OffshorePlatforms




OMAE2011-49121 Geometrical Parametric Study andDevelopment of Design Formulae for theSCF Distribution along the Weld Toe inMulti-planar CHS DKT-Connections ofOffshore Structures


OMAE2011-50328 Experimental Investigation into theBehaviour of a New Replaceable BracingSystem


OMAE2011-50334 Three-dimensional Joint FlexibilityElement for Modeling of OffshoreTubular Connections


2-39 Risk Analysis and Safety Management I (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Haibo Chen, Scandpower Inc. (China) Session Co-Chair: Marcelo R. Martins, University of São Paulo OMAE2011-49008 Avoiding Disasters: Evolution in integrity

and maintenance managementTechnicalPublication

OMAE2011-50344 Analysis of Oil Spill Risk in DP ShuttleTanker Direct Offloading Operations


OMAE2011-49110 An Innovative Oil Pollution ContainmentMethod for Ship Wrecks Proposed forOffshore Well Blow-outs.


OMAE2011-50186 Application of Formal Safety Assessmentto Navigational Risk Evaluation ofYangtze River


2-40 Risk Analysis and Safety Management II (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Haibo Chen, Scandpower Inc. (China) Session Co-Chair: Bernt Leira, NTNU OMAE2011-49927 Design and Testing of a Thermally-

Actuated Gas Lift Safety ValveTechnicalPublication

OMAE2011-49006 System Reliability Approach forImproving Fire Safety Onboard Ships


OMAE2011-49471 Thermal Requirements for Surviving aMass Rescue Incident in the Arctic –Preliminary Results


OMAE2011-49713 A Modified Structural Arrangement ofRigs for Safe Launching of Life Boatsand Berthing of OSVs.


2-41 Risk Analysis and Safety Management III (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Marcelo R. Martins, University of São Paulo Session Co-Chair: Bernt Leira, NTNU OMAE2011-49393 Bayesian Networks on Risk Analysis of a

Regasification System on an OffshoreUnit


OMAE2011-49396 Consequence analysis of a LiquefiedNatural Gas Floating Production StorageOffloading (LNG FPSO) Leakage


OMAE2011-50340 Probabilistic Risk Assessment for FPSOTopside Structures Under Drop Impact:An Application to Pipeline Protections




OMAE2011-50268 Quantitative Risk Analysis AndComparison For Onshore and OffshoreLNG Terminals: The Port of Suape -Brazil Case


2-42 Risk Analysis and Safety Management IV (Technical Session) Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Haibo Chen, Scandpower Inc. (China) Session Co-Chair: Marcelo R. Martins, University of São Paulo OMAE2011-50244 Review of Fuzzy Set Theory Applications

in Safety Assessment for Marine andOffshore Industries


OMAE2011-50073 Structural health monitoring of concretefilled steel tube arch bridge for oil wharf


OMAE2011-49926 EXTENSIVE DYNAMIC ANALYSES TOACHIEVE STRINGENT NOISE ANDVIBRATION LEVELS FOR AN OFFSHORERECIPROCATING COMPRESSOR SYSTEM


OMAE2011-49247 Mooring Line Failure Detection System -MOORASSURE


SYMP 3 Materials Technology Expand All Sessions In Symposia Symposium Coordinator: Mamdouh Salama, ConocoPhillips Company

3-1 HSE/PSA Workshop on Ageing and Life Extension of OffshoreInstallations - Regulatory Perspective) (Workshop Session)

Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Alexander Stacey, Health & Safety Executive Session Co-Chair: Gerhard Ersdal, Petroleum Safety Authority Norway OMAE2011-49264 A Survey of Industrial Practices for the

Management of Ageing Assets and LifeExtension that are Relevant to OffshoreStructures


OMAE2011-49261 Issues for consideration in life extensionand managing of ageing facilities


OMAE2011-50046 Experience from Norwegian programmeon ageing and life extension


OMAE2011-49089 KP4: AGEING & LIFE EXTENSIONINSPECTION PROGRAMME FOROFFSHORE STRUCTURES


3-2 LNG/FLNG Tank and Pipe Design and Materials Workshop (I)(Workshop Session)

Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Xiaozhi Wang, ABS

Session Co-Chair: Jaime Buitrago, ExxonMobil Upstream ResearchCompany

OMAE2011-49659 A Study on the Application of CryogenicDesign Criteria to a Self-supportingPrismatic IMO Type B LNG Tank Made ofSUS304(Mod)


OMAE2011-49330 Development of New IMO Type B Tankbased on the Results of CryogenicMaterial Property Tests


OMAE2011-49345 AN EXPERIMENTAL STUDY ON Technical



BEHAVIORS OF IMO TYPE B CCSMATERIALS AT ROOM AND CRYOGENICTEMPERATURES

Publication

OMAE2011-50201 Fatigue Assessment of Aluminum ShipDetails by Hot-Spot Stress Approach


3-3 HSE/PSA Workshop on Ageing and Life Extension of OffshoreInstallations - Ageing Management (Workshop Session)

Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Alexander Stacey, Health & Safety Executive Session Co-Chair: Gerhard Ersdal, Petroleum Safety Authority Norway OMAE2011-49898 Industry developed guidelines and

standards for ageing and life extensionTechnicalPublication

OMAE2011-49335 The Use of Capability Maturity Modellingto ensure Ageing and Life Extension areadequately considered in StructuralIntegrity Management


OMAE2011-49203 A Framework for the Management ofAgeing Safety Critical Elements offshore


OMAE2011-49363 Material issues in ageing and lifeextension


3-4 HSE/PSA Workshop on Ageing and Life Extension of OffshoreInstallations - Mobile & Fixed Installations (Workshop Session)

Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Gerhard Ersdal, Petroleum Safety Authority Norway Session Co-Chair: John Sharp, Cranfield University OMAE2011-49656 STRUCTURAL INTEGRITY MANAGEMENT

FRAMEWORK FOR MOBILEINSTALLATIONS


OMAE2011-49090 AGEING & LIFE EXTENSIONCONSIDERATIONS IN THE INTEGRITYMANAGEMENT OF FIXED AND MOBILEOFFSHORE INSTALLATIONS


OMAE2011-49654 Review and Assessment of MaterialProperty Requirements for MobileInstallations


OMAE2011-49091 CRITICALITY RATING OF AGEING FIXEDOFFSHORE STRUCTURES


3-5 HSE/PSA Workshop on Ageing and Life Extension of OffshoreInstallations - Assessment & Maintenance (Workshop Session)

Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Gerhard Ersdal, Petroleum Safety Authority Norway Session Co-Chair: Alexander Stacey, Health & Safety Executive OMAE2011-49959 Assessment of ageing structures - case

studiesTechnicalPublication

OMAE2011-50319 Fatigue Damage Repair and LifeExtension of a Floating Production Unit:The VFB Platform Revisited


OMAE2011-49935 Fatigue Life Extension of OffshoreStructures by Ultrasonic Peening


OMAE2011-50310 Fatigue Life Improvement of Weldedelements and Structures by UltrasonicImpact Treatment




OMAE2011-49050 Maintenance Integrity: Managing FlangeInspections on Aging OffshoreProduction Facilities


3-6 Fatigue of Girth Welds (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Yuri Tkach, Lloyd's Register Session Co-Chair: Rick Noecker, ExxonMobil Development Company OMAE2011-50306 FATIGUE OF HIGH QUALITY GIRTH

WELDS – REVIEWTechnicalPublication

OMAE2011-49942 Fatigue performance full-scale girthwelded pipes under variable amplitudeloading


OMAE2011-49130 Effects of microstructure and hydrogencharging on fatigue performance ofduplex and superduplex stainless steels.


OMAE2011-50222 A Level 3 BS7910 ECA for a TitaniumStress Joint for Use on a High MotionFloater in the Gulf of Mexico


3-7 Performance & Application of Materials (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Stephen Liu, Colorado School of Mines Session Co-Chair: Myung Hyun Kim, Pusan National University OMAE2011-49003 MID THICKNESS DELAYED CRACKING

OF Z-QUALITY OFFSHORE STEELTechnicalPublication

OMAE2011-49680 Relationship between Charpy V-NotchImpact value and Fracture mechanicstoughness: added value of finiteelement analysis and instrumentedimpact tests


OMAE2011-49450 Finite Element Modelling of DeepwaterUOE Linepipe Manufacturing


OMAE2011-49132 A Study on the Fatigue Life of GlassReinforced Polymer Composites for TidalTurbine Blades


OMAE2011-49002 OCTG – Downhole Tubulars based onmechanically lined BuBi® - Pipes


3-8 Constraint and 3D Effects on fracture and fatigue analysis (TechnicalSession)

Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Francois Bardi, ExxonMobil Upstream Research Session Co-Chair: Pedro Vargas, Chevron Energy Technology Company OMAE2011-49914 Relative Notch Factor For Tubular Joint

Stress Concentration Under High LoadTechnicalPublication

OMAE2011-50190 Two-Parameter Elastic-Plastic FractureMechanics Analysis of Surface CrackedPlates under Uniaxial and BiaxialLoading


OMAE2011-49311 Effects of Weld Strength Mismatch on Jand CTOD Estimation Procedures forSENT Fracture Specimens Based onPlastic Eta-Factors


OMAE2011-49165 COMPUTATIONAL FRACTURE Technical



MECHANICS ASSESSMENT OF 3-DCRACK-LIKE DEFECTS IN COMPLEXGEOMETRIES

Publication

3-9 Hydrogen embrittlement under static and dynamic loading (TechnicalSession)

Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Fraser McMaster, Chevron Session Co-Chair: Amir Bahrami, TWI Ltd OMAE2011-49348 Hydrogen Effect on Fracture Toughness

of API 5L X70, X65, X52 Pipeline SteelWelds– an Overview


OMAE2011-50009 HYDROGEN INDUCED MECHANICALPROPERTY BEHAVIOR OF DISSIMILARWELD METAL INTERFACES


OMAE2011-49131 Effects of strain rate and microstructureon fracture toughness of duplex andsuperduplex stainless steels underhydrogen charging conditions.


OMAE2011-49242 Evaluation of the performance of Inconel718 fasteners subjected to cathodicprotection systems in offshore andsubsea applications


OMAE2011-49911 Fe Simulation of Cold CrackingSusceptibility in X70 Structural SteelWelded Joints


3-10 Fatigue & Fracture Assessment (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Koji Gotoh, Kyushu University Session Co-Chair: Stephen J Hudak Jr, Southwest Research Institute OMAE2011-49988 Construction of Various Fatigue Design

Master S-N Curves for Offshore/MarineStructures Using Battelle StructuralStress Method


OMAE2011-49733 Fatigue Master Curve Approach for Arc-Welded Aluminium Joints ~ Mean StressEffects


OMAE2011-49853 Fatigue Assessment of Subsea TreeConnectors and Wellheads


OMAE2011-49277 Application of Actual In-ServiceSpectrum to SCR Girth Joints


3-13 Advances in Steel Technology – Corrosion and Fatigue resistantsteels (Technical Session)

Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Amir Bahrami, TWI Ltd Session Co-Chair: Fraser McMaster, Chevron OMAE2011-50312 Development of Heavy Wall High-

Strength UOE Linepipe by means ofMicrostructural Control in Base Metaland Seam Weld


OMAE2011-49501 Development of structural steel withhigh resistance to fatigue crack initiationand growth, Part 4




OMAE2011-49637 Development of guidelines on corrosionresistant steels for cargo oil tanks


OMAE2011-49503 Development of Corrosion ResistantSteel for Cargo Oil Tanks


3-14 LNG/FLNG Tank and Pipe Design and Materials Workshop (II)(Technical Session)

Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Xiaozhi Wang, ABS Session Co-Chair: Inge Lotsberg, DNV OMAE2011-49594 Development of 6%Ni Steel for LNG

Storage TanksTechnicalPublication

OMAE2011-49852 Stress Analysis of a CryogenicCorrugated Pipe


OMAE2011-50238 Pipeline Integrity And Rehabilitation TechnicalPublication

OMAE2011-49149 Development of 7%Ni-TMCP Steel Platefor LNG Storage Tanks


3-16 Fatigue Improvement & Welding Repair (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Rick Noecker, ExxonMobil Development Company Session Co-Chair: Koji Gotoh, Kyushu University OMAE2011-49485 Comparison of Solidification Behavior

between Underwater Wet Welding andDry Welding


OMAE2011-49231 Mooring line components with semi-brittle behavior – verification of fitnessfor purpose


OMAE2011-50286 CHARACTERIZING METAL ARCWELDING UNDER OIL (MAW-UO)


3-17 Strain based design of pipelines (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Jaime Buitrago, ExxonMobil Upstream Research Session Co-Chair: Xin Wang, Carleton University OMAE2011-49917 Strain Aging of C-Mn Line Pipe Steels:

An Analytical Approach to CompareStrain Aging Heat Treatments


OMAE2011-49818 EFFECT OF STRAIN AGEING ONMECHANICAL PROPERTIES OF PIPELINEGIRTH WELDS


OMAE2011-49683 Fracture Toughness Testing andValidation of Pipeline Girth Weld FlawAcceptance Criteria for Sour Serviceunder Large Strain


OMAE2011-49312 Fully-Plastic J and CTOD Solutions forPipes with Circumferential SurfaceCracks Subjected to Combined Bendingand Tension


OMAE2011-50208 ECA for operation – is today’s practice ofrelying on SENB instead of SENT testingwhile not taking internal pressure intoaccount conservative?


OMAE2011-50237 Multi-Tier Engineering Critical Technical



Assessment Of Pipelines For StrainBased Design

PresentationOnly

3-18 Fatigue performance in Sour Service (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Myung Hyun Kim, Pusan National University Session Co-Chair: Stephen Liu, Colorado School of Mines OMAE2011-50171 Corrosion Fatigue Performance of High-

Strength Riser Steels In Seawater andSour Brine Environments


OMAE2011-50204 Consistent Endurance FatigueKnockdown Factors for Sour Servicefrom Industry-Wide Database


OMAE2011-49581 Fatigue Performance of Sour DeepwaterRiser Welds: Crack Growth vs.Endurance


OMAE2011-49537 A modelling framework for describingthe corrosion fatigue behaviour ofcarbon steel pipelines and risers


3-19 Fatigue crack growth analysis in welded structures (TechnicalSession)

Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Stephen J Hudak Jr, Southwest Research Institute Session Co-Chair: Pedro Vargas, Chevron Energy Technology Company OMAE2011-49175 On the Derivation of Design S-N Curves

based on Limited Fatigue Test DataTechnicalPublication

OMAE2011-49457 Estimation of the Shape Evolution andthe Growth History of an EmbeddedCrack by Fatigue Loading


OMAE2011-49192 Factors Affecting the Fatigue Strength ofGirth Welds: A Re-evaluation of TWI'sResonance Fatigue Test Database


OMAE2011-50097 Fatigue Strength Characteristics of CastSteel Weld Joints


SYMP 4 Pipeline and Riser Technology Expand All Sessions In Symposia Symposium Coordinator: Segen Estefen, COPPE/UFRJ 4-1 Design and Analysis I (Technical Session)

Session Description:Aspects related to the design and analysis of pipelines and risers.

Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Vincent Olunloyo, University of Lagos, Akoka, Lagos Session Co-Chair: Olav Aamlid, DNV OMAE2011-49033 Pipeline Risk Assessment Using Analytic

Hierarchy Process (AHP)TechnicalPublication

OMAE2011-49034 Differential Burst Pressure of MarinePipelines as an Independent Layer ofProtection


OMAE2011-49184 Design Methodology for Axial ForceResponse of Pipe-in-Pipe – AProbabilsitic Approach


OMAE2011-49120 The Effect of the Seabed Proximity onthe Hydrodynamic Forces of thePiggyback Pipeline under Wave Action




4-2 Design and Analysis II (Technical Session)


Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Olav Aamlid, DNV Session Co-Chair: Vincent Olunloyo, University of Lagos, Akoka, Lagos OMAE2011-49074 Lateral Buckling Design of a 16-Inch Oil

Export PipelineTechnicalPublication

OMAE2011-49698 On Vortex Induced Vibration in Two-Degree-of-Freedoms of FlexibleCylinders


OMAE2011-49375 Test set-up for irregular verticalhydraulic transport in deep oceanmining.


OMAE2011-49606 Free Standing Hybrid Riser GlobalParametric Sensitivity Analysis AndOptimum Design


OMAE2011-49592 Dynamic Simulation of Free-SpanningPipeline Trawl Board Pull-Over


4-3 Design and Analysis III (Technical Session)


Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Vincent Olunloyo, University of Lagos, Akoka, Lagos Session Co-Chair: Olav Aamlid, DNV OMAE2011-49864 Riser Analysis for a New Dry Completion

Concept for a Monocolumn PlatformTechnicalPublication

OMAE2011-49741 Interrogation of Droplet Cloud in AnnularTwo-Phase Flow


OMAE2011-49932 Parametric Study on the Axial Vibrationsof Riser Suspended and Moored byChains (RSAA) Configurations


OMAE2011-50007 Integrated Analysis of Mooring and RiserSystems for FPSO's in Harsh ShallowWater Environments


4-4 Mechanical Behavior I (Technical Session)

Session Description:Aspects related to the structural behavior of pipelines and risers.


Session Chair: Theodoro Netto, Federal University of Rio deJaneiro/Ocean Engineering Department

Session Co-Chair: Pedro Vargas, Chevron Energy Technology Company OMAE2011-49918 Burst Capacity Estimation of Pipeline

with Colonies of Interacting CorrosionDefects


OMAE2011-49054 REMAINING COLLAPSE CAPACITY OFCORRODED PIPELINES


OMAE2011-49879 ON THE PROPAGATION BUCKLING ANDEFFECTS IN ULTRA-LONG DEEP SUBSEAPIPELINES


OMAE2011-50184 Integral Buckle Arrestors for DeepwaterRigid Pipelines installed by Reeling




Method 4-5 Mechanical Behavior II (Technical Session)


Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Pedro Vargas, Chevron Energy Technology Company

Session Co-Chair: Theodoro Netto, Federal University of Rio deJaneiro/Ocean Engineering Department

OMAE2011-49706 Ratcheting, Wrinkling and Collapse ofTubes Induced by Axial Cycling underInternal Pressure


OMAE2011-49715 Ultra Heavy Wall Linepipe X65: DoubleJoint Girth Weld Performances forSevere Applications


OMAE2011-49361 On The Dynamic Collapse Of CylindricalShells Under Hydrostatic and ImpulsivePressure Loadings: Experimental andNumerical Analysis


OMAE2011-49434 Liner Wrinkling Of Lined Pipe DuringBending, Numerical And ExperimentalResults Compared


OMAE2011-49276 Potential Cost Savings in Wall ThicknessDesign Of Ultra Deepwater RigidPipelines.


4-6 Mechanical Behavior III (Technical Session)


Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Stelios Kyriakides, University of Texas at Austin Session Co-Chair: Chris Timms, C-FER Technologies OMAE2011-49571 Qualification of Enhanced Collapse

Capacity UOE Deepwater LinepipeTechnicalPublication

OMAE2011-49960 Global Buckling of Pipe-in-pipe –Structural Response and Design Criteria


OMAE2011-50209 Zap-Lok Connection Testing and AxialStrength Design


OMAE2011-49660 Engineering Design and Analysis of FreeStanding Hybrid Riser Top Buoyancy Can


4-7 Mechanical Behavior IV (Technical Session)


Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Chris Timms, C-FER Technologies Session Co-Chair: Stelios Kyriakides, University of Texas at Austin OMAE2011-49470 BUCKLING OF CLAD PIPES UNDER

BENDING AND EXTERNAL PRESSURETechnicalPublication

OMAE2011-49112 Comparative Strength Analysis ofAluminum Drill Pipes With SteelConnectors Assembled by DifferentMethods


OMAE2011-49178 Structural Integrity Assessment of aPipeline Subjected to an Underwater




Explosion OMAE2011-49424 Limit State Design Based on

Experimental Methods for High PressureHigh Temperature Riser and PipelineDesign


4-8 Mechanical Behavior V (Technical Session)


Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Francois Bardi, ExxonMobil Upstream Research Session Co-Chair: Spyros Karamanos, University of Thessaly OMAE2011-49570 Collapse Capacity UOE Deepwater

LinepipeTechnicalPublication

OMAE2011-50299 First-Principles Finite Element Modelingof Coiled Tubing in Directional Wellbores


OMAE2011-49251 On Dynamic Compression Of Risers: AnAnalytical Expression For The Speed OfCompression Waves


OMAE2011-49254 The Influence of the UOE-SAWL FormingProcess on the Collapse Resistance ofDeepwater Linepipe


4-9 Mechanical Behavior VI (Technical Session)


Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Spyros Karamanos, University of Thessaly Session Co-Chair: Francois Bardi, ExxonMobil Upstream Research OMAE2011-49442 Susceptibility to Lateral Buckling : What

Hobbs Equations for What FlowlinesTechnicalPublication

OMAE2011-49464 Dynamics of the vertical hydraulictransport system for deep sea mining


OMAE2011-49702 Detailed Contact Analysis of the J-tubeRiser Pull-in Method


OMAE2011-49270 Integrity Of Mechanically Lined PipesSubjected To Multi-Cycle Plastic Bending


4-13 Fracture and Fatigue I (Technical Session)

Session Description:Aspects related to fracture and fatigue failure modes.

Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Philippe Darcis, TenarisTamsa - R&D Center Session Co-Chair: Ilson Pasqualino, COPPE/UFRJ OMAE2011-49044 ASSESSMENT OF FATIGUE DAMAGE

INITIATION IN OIL AND GAS STEELPIPES


OMAE2011-49179 HAZ Toughness: Realistic testing forpipeline integrity


OMAE2011-49583 Characterisation of Slug Flow Conditionsin Pipelines for Fatigue Analysis


OMAE2011-49086 Elastic-Plastic Pull-In Strength andDamage Analyses of Steel CatenaryRisers in Deepwater




4-14 Fracture and Fatigue II (Technical Session)

Session Description:Aspects related to fracture and fatigue failure modes.

Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Ilson Pasqualino, COPPE/UFRJ Session Co-Chair: Philippe Darcis, TenarisTamsa - R&D Center OMAE2011-49602 Effects of Sensitive Factors on the VIV-

induced Fatigue Damage in FreeStanding Hybrid Riser(FSHR)


OMAE2011-49605 FREE STANDING HYBRID RISER GLOBALMOTION FATIGUE ANALYSIS


OMAE2011-49996 ENGINEERING CRITICAL ASSESSMENTOF EMBEDDED FLAWS IN A PIPELINEUSING A PROBABILISTIC APPROACH


OMAE2011-49945 Mechanical Qualification of DynamicDeep Water Power Cable


4-15 Installation (Technical Session)

Session Description:Aspects related to the installation of pipelines and risers.

Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Duane DeGeer, INTECSEA, Inc Session Co-Chair: Qishi Chen, C-FER Technologies OMAE2011-49832 Offshore Pipeline Installation - 3-

Dimensional Finite Element ModellingTechnicalPublication

OMAE2011-49967 Model Tests of Pipe-laying Vessel.Results and Analysis.


OMAE2011-49389 Reliability Based Assessment ofMinimum Wall Thickness for Reeling


OMAE2011-49862 Alternative Method of Installation ofRiser Support Buoy


4-16 On-Bottom Behavior and Pipe-Soil Interaction I (Technical Session)

Session Description:Aspects related to pipeline free-spanning, on-bottom stability andpipeline/riser interaction with the soil.

Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Daniel Carneiro, Bureau Veritas Session Co-Chair: Ayman Eltaher, MCS Kenny OMAE2011-49384 Pipeline On-Bottom Stability Analysis

Based on FEM ModelTechnicalPublication

OMAE2011-49431 Inline And Vertical Wave Force VariationDue To Burial Of Submarine Pipeline InRandom Wave Fields


OMAE2011-50239 Advanced FEA for Span MitigationAnalysis


OMAE2011-49530 Effect of Vertical Loading on UnburiedOffshore Pipeline Stability on CarbonateSeabed


4-17 On-Bottom Behavior and Pipe-Soil Interaction II (Technical Session)


takatani

長方形



Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Ayman Eltaher, MCS Kenny Session Co-Chair: Daniel Carneiro, Bureau Veritas OMAE2011-50047 Probabilistic Model application in the

integrated stability Analysis of Offshoreon-bottom pipeline


OMAE2011-50183 Assessment of Lateral Buckles in aHP/HT Pipeline Using Sidescan SonarData


OMAE2011-50188 Evaluation of the Operational Behaviourof a Deepwater Oil Export PipelineDesigned on the Basis of ControlledLateral Buckling


OMAE2011-49831 Advanced Analysis and Design Tools forOffshore Pipelines in Operation


4-18 On-Bottom Behavior and Pipe-Soil Interaction III (TechnicalSession)


Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Ibrahim Konuk, Technip USA Session Co-Chair: Alexandre Hansen, PETROBRAS S.A. OMAE2011-49150 Tangguh LNG Project Statistical Young's

Modulus and Thermal ExpansionCoefficient Testing of Clad PipeSpecimens


OMAE2011-49152 Development of a Full Scale Two-Dimensional Pipeline Uplift TestApparatus for Upheaval Buckling (UHB)Model Testing On The Tangguh LNGProject


OMAE2011-49153 Tangguh LNG Project Analysis of FullScale Statistical Uplift Testing WithMultiple Soil Layers


OMAE2011-49320 ANALYTICAL PREDICTION OF INITIALSTRESS INFLUENCE ON SURFACEPIPELINE IN SUBMARINE LANDSLIDE


4-19 On-Bottom Behavior and Pipe-Soil Interaction IV (Technical Session)


Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Yong Bai, Zhejiang University, P.R.China Session Co-Chair: Mohd Ashri, Petronas Caligali Sdn Bhd (PCSB), Ashri OMAE2011-49498 Upheaval Buckling Analysis Of Partially

Buried Pipeline Subjected To HighPressure And High Temperature


OMAE2011-49013 Lateral Buckling Behaviour of Snake-layPipeline with and Vertical Support atCrown


OMAE2011-49780 Simple Models for Pipeline WalkingAccounting for Mitigation and Complex




Soil Models OMAE2011-49819 Subsoil contribution to dynamic behavior

of offshore pipelines to impacts fromdropped objects


4-20 On-Bottom Behavior and Pipe-Soil Interaction V (Technical Session)


Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Mohd Ashri, Petronas Caligali Sdn Bhd (PCSB), Ashri Session Co-Chair: Yong Bai, Zhejiang University, P.R.China OMAE2011-49373 Synthesis and Optimization of

Submarine Pipeline Routes consideringOn-Bottom Stability Criteria


OMAE2011-49734 Novel Design of Small DiameterPipelines on Uneven Seabed


OMAE2011-49455 MECHANICAL BEHAVIOR OF BURIEDSTEEL PIPELINES CROSSING STRIKE-SLIP SEISMIC FAULTS


OMAE2011-50095 Pipeline Embedment Prediction UsingAs-Laid Data


OMAE2011-49937 Offshore Pipeline Shore Approach Design- Case Study


4-22 Inspection and Repair I (Technical Session)

Session Description:Procedures and techniques for the inspection and repair of pipelines andrisers.

Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Qishi Chen, C-FER Technologies Session Co-Chair: Basim Mekha, Cuneiform Offshore Consulting, LLC OMAE2011-49248 Development of Method/ Apparatus for

Close-Visual Inspection of Under-WaterStructures (Especially Pipelines) inMuddy and Unclear Water Conditions.


OMAE2011-49803 Damage detection in offshore free spanpipelines using wavelet packet transform


OMAE2011-50131 Experimental Research on DamagesDetection of Pipeline Structure by UsingPZT-based Waves


OMAE2011-49400 FLOWLINES AND RISERs PIPES ENDsLASER MEASUREMENT FOR ENHANCEDGIRTH WELDS MANUFACTURING andFATIGUE BEHAVIOR


OMAE2011-49427 Developing an Integrity ManagementSystem for Damaged Subsea PipelinesUsing Experimental and AnalyticalMethods


4-23 Inspection and Repair II (Technical Session)

Session Description:Procedures and techniques for the inspection and repair of pipelines andrisers.

Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors:



Session Chair: Basim Mekha, Cuneiform Offshore Consulting, LLC Session Co-Chair: Qishi Chen, C-FER Technologies OMAE2011-49425 Assessing the Use Of Composite

Materials In Reinforcing Offshore Risersand Pipelines


OMAE2011-49181 Top Tension Riser Fatigue MonitoringSystem


OMAE2011-49726 Riser Management System Performancein Ultra-Deep Water With RapidlyChanging Current


OMAE2011-49386 On-board Monitoring, Analysis andDecision Support during Offshore PipeLay Operations


4-25 Steel Riser I (Technical Session)

Session Description:Aspects related to the design and operation of steel risers.

Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Howard Wang, ExxonMobil Development Company Session Co-Chair: Mike Campbell, 2H Offshore OMAE2011-49096 CHALLENGES FACED IN THE DESIGN OF

SLWR CONFIGURATIONS FOR THE PRE-SALT AREA


OMAE2011-50127 Design Challenges of Top TensionedRisers in Ultra Deepwater Applications


OMAE2011-50195 Deepwater SCR BenchmarkingMethodology


OMAE2011-50151 Estimating long-term distributions ofextreme response of a catenary riser


4-26 Steel Riser II (Technical Session)


Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Mike Campbell, 2H Offshore Session Co-Chair: Howard Wang, ExxonMobil Development Company OMAE2011-49798 Qualification of Reeled Clad SCR Weld

Fatigue PerformanceTechnicalPublication

OMAE2011-49888 Comparison of different approaches forfatigue damage accumulation in steelrisers


OMAE2011-50150 Comparison of SCR field response withanalytical predictions


OMAE2011-49679 Advanced Numerical Simulation to MeetDesign Challenges of XHPHTMetallurgically Clad PIP Platform Riser


4-27 Steel Riser III (Technical Session)


Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Howard Wang, ExxonMobil Development Company Session Co-Chair: Mohamed Chebaro, C-FER Technologies OMAE2011-50052 Vibration reduction in steel catenary Technical



risers by the use of viscoelastic materials Publication OMAE2011-50330 Application of Comparative Analysis

Approaches for Deepwater SCRSTechnicalPresentationOnly

OMAE2011-50148 Steel catenary riser responseidentification based on fieldmeasurements


OMAE2011-49859 Development and Validation by Testingof High Strength Threaded & CoupledPremium Connectors Product Line forOuter Production Riser and SingleBarrier Riser Applications in UltraDeepwater


4-29 Flexible Pipes I (Technical Session)

Session Description:Design, fabrication, installation and maintenance of flexible pipes.


Session Chair: Svein Savik, Norwegian University of Science andTechnology

Session Co-Chair: Antoine Felix-Henry, TECHNIP Flexi-France OMAE2011-49036 An Investigation of Fatigue Damage due

to VIV in Flexible Riser with ThreeDifferent Methodologies


OMAE2011-49524 Crushing of flexible pipes under traction:a theoretical-experimental assessment


OMAE2011-49745 QUICK CONNECTION COUPLINGS INTHE PERMEATED GAS RELIEF SYSTEMSOF FLEXIBLE RISER END-FITTINGS


OMAE2011-50210 Multiple Axial Fatigue of Pressure Armorsin Flexible Risers


4-30 Flexible Pipes II (Technical Session)


Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Antoine Felix-Henry, TECHNIP Flexi-France

Session Co-Chair: Svein Savik, Norwegian University of Science andTechnology

OMAE2011-49105 FLEXIBLE PIPES: INFLUENCE OF THEPRESSURE LAYER IN THE WETCOLLAPSE RESISTANCE


OMAE2011-49133 A THREE-DIMENSIONAL CURVED BEAMELEMENT FOR HELICAL COMPONENTSMODELING


OMAE2011-49257 Psi Armour Wire for High CollapsePerformance of Flexible Pipe


OMAE2011-49324 Collapse of Reinforced Thermoplastic(RTP) Pipe under External Pressure


4-31 Flexible Pipes III (Technical Session)


Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Zhimin Tan, Wellstream International Ltd.



Session Co-Chair: Murilo Vaz, UFRJ OMAE2011-49188 Influence of hysteresis on the dynamics

of cryogenic LNG composite hosesTechnicalPublication

OMAE2011-49358 On lateral buckling failure of armourwires in flexible pipes


OMAE2011-50113 On the Structural Response of a FlexiblePipe with Broken Tensile Armor Wires


OMAE2011-49325 Burst Capacity of ReinforcedThermoplastic Pipe (RTP) under InternalPressure


4-32 Flexible Pipes IV (Technical Session)


Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Murilo Vaz, UFRJ Session Co-Chair: Zhimin Tan, Wellstream International Ltd. OMAE2011-49267 Numerical Analysis Assessment of the

Contact Pressure between the FlexiblePipe Outer sheath and the I tubeInterface Equipment for WearingResearch Program


OMAE2011-49392 Influence of Bore Pressure on the CreepBehaviour of the Polymer Barrier Layerinside an Unbonded Flexible Pipe


OMAE2011-49447 Lateral Buckling Of Armor Wires InFlexible Pipes: Reaching 3000m WaterDepth


OMAE2011-49506 An Experimental Analysis of a FlexibleRiser in Jumper Configuration


OMAE2011-49664 Toward an H2S Free Environment inFlexible Pipe Annulus Thanks to a NewNew Anti H2S Polymer Layer


4-33 Flexible Pipes V (Technical Session)


Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Nils Sodahl, Det Norske Veritas Session Co-Chair: Alan Dobson, Technip Umbilicals OMAE2011-49584 Rayleigh Damping Effects on Global

Analysis of UmbilicalsTechnicalPublication

OMAE2011-49662 Cross-section Layout Design of SteelTube Umbilical Based On FEA


OMAE2011-49148 Multiobjective Optimization for DynamicUmbilical Installation Using Non-dominated Sorting Genetic Algorithm


OMAE2011-49461 Bend Stiffener Design for Umbilicals TechnicalPublication

4-34 Flexible Pipes VI (Technical Session)


Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Alan Dobson, Technip Umbilicals



Session Co-Chair: Nils Sodahl, Det Norske Veritas OMAE2011-49459 Consistent VIV Fatigue Analysis

Methodology for UmbilicalsTechnicalPublication

OMAE2011-49147 Multiaxial fatigue analysis on reeled steeltube umbilical


OMAE2011-49836 Comparison Between a Motion CaptureSystem And ConventionalInstrumentation Methods in a DynamicStudy of Flexible Lines


OMAE2011-50011 Innovative Supports Of Risers AndCorresponding Installation Procedures


OMAE2011-49481 COOL™ Hose Qualification Process ofthe first EN1474-2 LNG Floating Hose


SYMP 5 Ocean Space Utilization Expand All Sessions In Symposia Symposium Coordinator: Hideyuki Suzuki, University of Tokyo Symposium Co-Coordinator: Takeshi Kinoshita, University of Tokyo 5-1 Deepsea Mining Systems I (Technical Session)

Session Description:The objectives of the deepsea mining systems session are review of stateof the art technology in deepsea mining and present industry leaders’view of the need for bridging the technology gaps in the deepsea miningareas. Safe practices, knowhow of key technologies, and test results areshared.

Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Glen Smith, Nautilus Minerals Session Co-Chair: Tetsuo Yamazaki, Osaka Prefecture Univ. OMAE2011-49217 RESOURCE DRILLING OF THE SOLWARA

1 SEAFLOOR MASSIVE SULFIDE (SMS)DEPOSIT


OMAE2011-49806 Deep Sea Mining with a Archimedesscrew driven vehicle


OMAE2011-49172 Deep Sea Hydraulics - Proven solutionsfor up to 6,000 m water depth


OMAE2011-49981 Concept of Seafloor Mineral Processingfor Development of Seafloor MassiveSulfides


5-3 Water Front and Coastal Design and Planning (Technical Session)

Session Description:Ocean Management session covers marine spatial management andmanagement of marine public facilities as well as technical concepts forwater front and coastal protection such as submerged breakwaters andsubmerged accommodation. Socioeconomical aspect of oceanmanagement is covered by the session.

Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Takeo Kondo Session Co-Chair: Kazukiyo Yamamoto, NIHON University OMAE2011-49190 New Concept of Port Planning for Small

Ferries from Viewpoint of Berthing ShipMotions Under Strong Tidal Currents


OMAE2011-49512 A CONCEPTUAL DESING ON THE BSL-4LOCATION AND MANAGEMENT


OMAE2011-49858 An Experimental Study on the WaterwayRescue System for Natural Disasters in




the Tokyo Metropolis OMAE2011-50084 An User Evaluation Study on the

Universal Network of the WaterTransportation in the Seto Inland Sea inJapan


OMAE2011-50085 AN ANALYTIC STUDY ON THE SOCIO-ECONOMIC VALUE OF A FISHING PORTUSING THE CONTINGENT VALUEMETHOD (CVM)-CASE STUDY OFCOMPARISON BETWEEN FISHING PORTAND MARINA AT KANTO REGION INJAPAN-


5-4 Underwater Exploration and Utilization (Technical Session)

Session Description:The session covers the underwater technology such as acoustictechnology and sampling system as well as development of underwatervehicles (AUVs and ROVs) and underwater systems. The session alsocovers underwater utilization technology such as CCS technology and therelated underwater technology to monitor, observe and sense underwateror under seabed.

Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Tomoya Inoue, JAMSTEC

Session Co-Chair: Hiroyoshi Suzuki, Osaka University, Dept of NavalArchitecture and Ocean Eng.

OMAE2011-49643 A study on improvement of propulsiveperformance of an underwater vehicle“PICASSO”


OMAE2011-49801 The Motion Characteristics of CrawlerDriven ROV Moving over Bumps


OMAE2011-49812 Conceptual Design of Navigation of anAUV for monitoring CCS Site at DeepSea Bottom.


OMAE2011-50090 Scientific Drilling Program of DrillingVessel CHIKYU and Drilling DataAcquisition for Future TechnicalDevelopment


OMAE2011-50279 The Development of the Compact SizeINS for Underwater Vehicles


5-5 VLFS and New Type of Floating Facilities II (Technical Session)

Session Description:The topics covered by the session are VLFS related hydroelastic analysisand response optimization, design and response characteristics of floatingfacilities for ocean renewable energy and facilities for food production.New concepts of facilities and analysis method related to oceanrenewable energy and food production are also covered by the session.

Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Koichi Masuda, Nihon University Session Co-Chair: Hideyuki Suzuki, University of Tokyo OMAE2011-49730 Progressive Drift of Moored Floating

Wind Turbines in a Wind Farm -Improved Mooring Capacity Model -


OMAE2011-50258 An Approach for the Optimum Design ofTLP Type Offshore Wind Turbine


OMAE2011-49641 Concurrent Design Introduction Activity Technical



At IHC Merwede Publication 5-7 Aquaculture and Related Technology I (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Arne Fredheim, SINTEF Fisheries and Aquaculture OMAE2011-49410 Simulation of a High-Energy Finfish

Aquaculture Site Using a Finite-ElementNet Model


OMAE2011-49761 Experimental Studies and NumericalModeling of Copper Nets in MarineEnvironment


OMAE2011-49213 Experimental Investigation andNumerical Modeling of HydrodynamicForce Characteristics and Deformation ofan Elastic Net


5-8 Deepsea Mining Systems II (Technical Session)


Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Jan Willem van Bloois Session Co-Chair: Tetsuo Yamazaki, Osaka Prefecture Univ. OMAE2011-49562 Numerical Evaluation of Observation

Algorithm for Sea Surface RemoteSensing by Doppler Radar


OMAE2011-49968 FLUCTUATION OF HIGH-TURBIDITYWATER MEASURED BY ACOUSTICDOPPLER CURRENT PROFILER AT THEIZENA HOLE IN THE OKINAWA TROUGH


OMAE2011-49453 Approaches for Environmental ImpactAssessment of Seafloor Massive SulfideMining


5-9 Deepsea Mining Systems III (Technical Session)


Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Laurens de Jonge Session Co-Chair: Tetsuo Yamazaki, Osaka Prefecture Univ. OMAE2011-49906 ENVIRONMENTAL RESEARCH FOR

ASSESSING THE IMPACTS OF MININGSEAFLOOR MASSIVE SULFIDES INJAPAN


OMAE2011-49987 CHARACTERISTICS OF THEENVIRONMENT AROUND A MASSIVESEA-FLOOR SULFIDE AREA IN THEOKINAWA TROUGH


OMAE2011-50096 Analysis Tool for Environmental Impact Technical



of Seafloor Resources Development Publication 5-10 VLFS and New Type of Floating Facilities I (Technical Session)

Session Description:The topics covered by the session are VLFS related hydroelastic analysisand response optimization, design and response characteristics of floatingfacilities for ocean renewable energy and facilities for food production.New concepts of facilities and analysis method related to oceanrenewable energy and food production are also covered by the session.

Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Kazuyuki Ouchi, The University of Tokyo Session Co-Chair: Yasunor Nihei, Osaka Prefecture University OMAE2011-49092 Hydroelastic Response Of Square VLFS

with Line Hinge Connector SystemTechnicalPublication

OMAE2011-49128 Concept Design for Offshore DOWPlatform as Infra-Structure of IsolatedIsland


OMAE2011-49732 Behavier Of The Pontoon Supported ByMooring Dolphin In Tsunami.


5-11 Aquaculture and Related Technology II (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Arne Fredheim, SINTEF Fisheries and Aquaculture OMAE2011-50240 Tank Model Testing of a Fish-Cage

Flotation/Submersion System UsingFlexible Hoses


OMAE2011-49963 Response Characteritics of the FloatingWater Purifier


OMAE2011-50144 Reverse Simulation For Specifying TheSource Of Pollutants In Waters


OMAE2011-50205 Flow Fields Inside Stocked Fish Cagesand the Near Environment


SYMP 6 Ocean Engineering Expand All Sessions In Symposia Symposium Coordinator: R.C. Ertekin, University of Hawaii at Manoa 6-1 Wave Mechanics and Wave Effects - I (Technical Session)

Session Description:nonlinear waves; internal waves; surface waves; wave-ice interaction;wave-structure interaction; wave-wave interaction; tsunamis, ExtremeEpisodic waves, and others

Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Christian Schmittner, MARIN Session Co-Chair: Thomas Schellin, Germanischer Lloyd OMAE2011-49053 Velocity, Pressure, and Dam-Break

Similarity of Green Water Flow on a 3DStructure


OMAE2011-49256 A design procedure for evaluating theair-gap on semi-submersible platforms


OMAE2011-49439 Internal-wave sloshing in triangular-shaped containers: A numerical study


OMAE2011-49280 Infragravity waves induced by short-wave groups in coastal regionscharacterized by general bottomtopography


6-2 Marine Vehicles and Structures - I (Technical Session)



Session Description:dynamic positioning and control; seakeeping; propulsion; cavitation;design and analysis of surface ships; advanced ship technology; sailing;vortex shedding; vibrations, supercavitation, hydrofoil technology,projectile motions, jet actuators, air injection, planing bodies, high-speedvehicles, and others

Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Janou Hennig, MARIN Session Co-Chair: Jeffrey Falzarano, Texas A&M University OMAE2011-49069 Hydrodynamic performance of a deep-

vee hull form catamaran in regularwaves


OMAE2011-49260 Application of Reduced Order Modelingfor Design of Interacting MaritimeStructures


OMAE2011-49440 AN EXPERIMENTAL INVESTIGATIONASSESSING THE VALIDITY OF QUASI-STATIC CALCULATIONS FOR ANOSCILLATING HYDROFOIL


OMAE2011-49529 A Low-Cost, High Rate Motion SoftwareSensor System based on novel datafusion for Unmanned Surface Vehiclenavigation and OceanographicInstrumentation motion correction


6-3 Advanced Ship-Hydromechanics/Marine Technology - I (TechnicalSession)

Session Description:CFD calculations and validations, Hydrodynamic Loads and Fluid StructureInteraction, Seakeeping, Roll Damping, Combined Seakeeping andManeuvering, Vessel Dynamics and Stability, LNG Terminals, Mooring,Propulsion hydrodynamics, Ship resistance, and others

Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Ronald W. Yeung, University of California at Berkeley Session Co-Chair: Solomon Yim, Oregon State University OMAE2011-49209 Comparitive study of hydroelastic impact

for one free-drop wedge with stiffenedpanels by experimental and explicit finiteelement methods


OMAE2011-49218 Time Domain Analysis of Springing andWhipping Responses Acting on a LargeContainer Ship


OMAE2011-49356 ON ROLL HYDRODYNAMICS OF FPSO’SFITTED WITH BILGE KEELS AND RISERBALCONY


OMAE2011-49240 Simulation of Weather and Ocean forNumerical Ship Navigation


6-4 Model Tests - I (Technical Session)

Session Description:model-tank, towing-tank, coastal-basin, flume, cavitation, and other labexperiments

Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Antonio C. Fernandes, Federal University of Rio de Janeiro Session Co-Chair: Jon Mikkelsen, University of British Columbia



OMAE2011-49145 A novel method for generatingcontinuously surfable waves –comparison of predictions withexperimental results


OMAE2011-49315 Free Roll Decay of a Damaged Ship forCFD Validation


OMAE2011-49365 Experimental Investigations into theInfluences of SCRs and Appurtenanceson Deepdraft Semisubmersible VortexInduced Motion Response


OMAE2011-49366 FIRST OCEAN GOING SHIPS WITHSPRINGING AND WHIPPING INCLUDEDIN THE SHIP DESIGN


6-5 Underwater Technology (Technical Session)

Session Description:AUV and ROV; life support systems for deep-water; diving; underwatercontrol; hyperbaric systems, and others.

Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Andre Kauffeldt, Technical University of Berlin Session Co-Chair: Daniel T. Valentine, Clarkson University OMAE2011-49024 high resolution seabed sub-bottom

profiler for AUVTechnicalPublication

OMAE2011-49535 CFD analysis of axisymmetricunderwater vehicles with experimentalvalidation


OMAE2011-49670 Numerical study on hydrodynamicbehavior of an underwater glider


OMAE2011-49868 Conceptual design of a SubmersibleRemotely Operated Swimming Dredger(SROSD)


6-6 Towed and Undersea Cables and Pipes, Mooring, and BuoyTechnology - I (Technical Session)

Session Description:hydrodynamics; structural dynamics; cable laying; ocean construction,and design, and others.

Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Jon Mikkelsen, University of British Columbia

Session Co-Chair: Steven Schmied, University of Tasmania AustralianMaritime College

OMAE2011-49304 Adaptive Vibration Control of TowedSeismic Cable


OMAE2011-49590 Research on Hydrodynamic Interactionand Global Response of Tandem-MooredTankers


OMAE2011-49597 Coupled analysis of floating structureswith new mooring system


6-7 Coastal Engineering - I (Technical Session)

Session Description:underwater pipelines; breakwaters; islands; scouring and sedimenttransport; shallow-water wave mechanics; coastal morphology;environmental impact and detection; water front and coastal design andplanning; morphodynamics, and others.

Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors:



Session Chair: Igor Shugan, National Cheng Kung University Session Co-Chair: Ismail H. Helvacioglu, Istanbul Technical University OMAE2011-49029 WAVE EFFECT ON SLOTTED

BREAKWATERS CONSIDERINGEVANESCENT MODES


OMAE2011-49064 Scour Around Vertical Pile Foundationsfor Offshore Wind Turbines Due toLong-Crested and Short-CrestedNonlinear Random Waves


OMAE2011-49279 Experimental Study of a NegativelyBuoyant Horizontal Jet in WaveEnvironment


OMAE2011-49474 Experimental Investigation of LocalScour around Conical Piers


6-8 Marine Environmental Engineering (Technical Session)

Session Description:marine biofouling/antifouling; oil-spill containment technology/modeling;environmental impact assessment; hydrodynamic and marine ecosystemmodeling; environmental remediation; water/air quality; noise--underwater/on-board/air-born; hazardous materials/waste, and others.

Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Daniel T. Valentine, Clarkson University Session Co-Chair: Ceren Bilgin Guney, Istanbul Technical University OMAE2011-49224 Effects of Ammonia on Electrochemical

Chlorine Generation for Ballast WaterTreatment


OMAE2011-50129 AN OIL SPILL AND RESPONSEACTIVITIES SCENARIOS AFTER THEFUEL TANK SEEPAGE IN A PORT:HAYDARPASA PORT CASE STUDY


OMAE2011-49294 Design and Reseach on Some KeyTechnologies of Combined Hydrocyclone


OMAE2011-50039 Physical Modelling of Brine Discharge:Effect of Depth on Dilution


OMAE2011-50126 Efficiency Enhancement of a FLNGSystem using Deep Cold Tropical Sea-Water


6-9 Ocean Measurement and Data Interpretation - I (Technical Session)

Session Description:Wave Measurements, Ocean Observatories and Metocean Data, OffshoreField Measurements, Ocean environment, Hydrodynamic and structuralfull-scale measurements of platforms, and of marine systems, such asdeep-ocean moorings, risers, pipelines, and subsea facilities remotesensing; observations; sea-floor mapping; satellite/radio signal analysis;ship-board systems; ocean atlas, and others.

Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Gus Jeans, Fugro GEOS Session Co-Chair: Igor Shugan, National Cheng Kung University OMAE2011-49061 A Variational Wave Acquisition Stereo

System for the 3-D Reconstruction ofOceanic Sea States


OMAE2011-49170 A Study on Akaike’s BayesianInformation Criterion in WaveEstimation.




OMAE2011-49443 Comparison of methods for short crestedwave analysis


OMAE2011-49811 Operational margin from Weather andMotion Database for Heavy Transportvessels


6-10 Computational Mechanics and Design Applications (TechnicalSession)

Session Description:computational modeling; boundary-element; FDM, FVM, FEM, and othernumerical methods used to solve mechanics problems, and designapplications, and others

Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Solomon Yim, Oregon State University

Session Co-Chair: Thomas C Fu, Naval Surface Warfare Center, CarderockDivision

OMAE2011-49215 THE EFFECT OF PRESSURE SOLUTIONIN SPH SIMULATIONS OF SLOSHINGFLOW


OMAE2011-49282 A Simple Method for Analysis of SeabedDeposits Deformation Due to MethaneHydrate Dissociation


OMAE2011-49639 Coupled Eulerian Lagrangian Approachto Model Offshore Platform Movementsin Strong Tidal Flows


6-13 Wave Mechanics and Wave Effects - II (Technical Session)

Session Description:nonlinear waves; internal waves; surface waves; wave-ice interaction;wave-structure interaction; wave-wave interaction; tsunamis, ExtremeEpisodic waves, and others.

Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Jang Whan Kim, Technip Session Co-Chair: Thomas Schellin, Germanischer Lloyd OMAE2011-49194 Forces on Pairs of Closely Spaced

Unequal Circular Cylinders in an ExternalFlow


OMAE2011-49593 Wave Patterns, Wave Induced Forcesand Moments For a Gravity BasedStructure Predicted Using CFD


OMAE2011-49290 Laboratory Observation On TheEvolution Of Deep-Water Wave Packets


OMAE2011-49675 Higher order wave-current elevations indeep water


OMAE2011-50080 Calculation of the Accelerated Breaking-roller Propagation Speed and WaveEnergy Transfer to the Roller


6-14 Wave Mechanics and Wave Effects - III (Technical Session)


Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors:

Session Chair: Kostas Belibassakis, School of Naval Architecture & MarineEng



Session Co-Chair: Ismail H. Helvacioglu, Istanbul Technical University OMAE2011-49870 Internal waves impact on the sea

surfaceTechnicalPublication

OMAE2011-49777 Comparison of Numerical Methods forWave Generation by VOF-basedNumerical Wave Tank


OMAE2011-49938 REFINING AN EDDY VISCOSITY MODELFOR TWO-DIMENSIONAL BREAKINGWAVES IN DEEP WATER: EXPERIMENTS


OMAE2011-49958 Sparse Spectrum Model Of The SeaSurface


6-15 Wave Mechanics and Wave Effects - IV (Technical Session)


Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Daniel T. Valentine, Clarkson University

Session Co-Chair: Tai-Wen Hsu, Department of Hydraulic and OceanEngineering, National Cheng Kung University

OMAE2011-50219 Characteristics of Steep Second-OrderRandom Waves in Finite and ShallowWater


OMAE2011-49814 Gap-filling and Predicting WaveParameters Using Support VectorRegression Method


OMAE2011-49102 WAVE HEIGHT MEASUREMENTS BEHINDSUBMERGED LENS-SHAPEDSTRUCTURES


OMAE2011-49896 Statistical Analysis on the ExtremeEvents of Big Waves under WaveClimate Change around Taiwan Waters


6-16 Marine Vehicles and Structures - II (Technical Session)


Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Organizer: Jim O'Sullivan, Technip USA, Inc. Session Co-Chair: Jule Scharnke, MARIN OMAE2011-49541 Accidents in Situations with large

Stability ValuesTechnicalPublication

OMAE2011-49589 An Innovative Concept for a NewGeneration of Ore Carriers


OMAE2011-49840 Hydrodynamic Analysis OfSemisubmersibles For A Large ScaleDesalination Plant


OMAE2011-50025 The Empirical Mode DecompositionApplied to Dynamic Positioning Systems


OMAE2011-50081 Advanced Ship Maneuvering andMooring Support System at Ship-to-shipTransfer Operations by Fender




Monitoring System of Pneumatic Fenders 6-17 Marine Vehicles and Structures - III (Technical Session)



Session Chair: Nuno Fonseca, Centre for Marine Technology andEngineering (CENTEC)

Session Co-Chair: Andre Kauffeldt, Technical University of Berlin OMAE2011-49827 Station keeping adaptive control of a

boat with twin gasoline outboardmotors: Synthesis, Simulation and Sea-trials


OMAE2011-49303 Calculation of Floating Crane NaturalFrequencies Based on LinearizedMultibody Dynamics


OMAE2011-50248 Collaborated and Constrained Neural-EKF Algorithm for the Vessel TrafficMonitoring and Information System


OMAE2011-49500 A SHIP FLOTATION CONTROL SYSTEMBASED ON PUMP-DRIVEN TANK


6-18 Marine Vehicles and Structures - IV (Technical Session)


Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Janou Hennig, MARIN

Session Co-Chair: Kostas Belibassakis, School of Naval Architecture &Marine Eng

OMAE2011-50055 HYDROELASTIC VIBRATION OF FLUID-COUPLED CONTAINER MADE OFFUNCTIONALLY GRADED MATERIALS


OMAE2011-50263 SYSTEMATIC STUDY OF THEHYDRODYNAMIC FORCES ON A SAILINGYACHT HULL USING PARAMETRICDESIGN AND CFD


OMAE2011-50322 Investigation of the HydrodynamicCharacteristics of Asymetric Cross-Sections Advancing in Regular Waves


OMAE2011-50323 The Stabilizing Effect of U-Tanks asPassive Anti-Rolling Devices


6-19 Advanced Ship-Hydromechanics/Marine Technology - II (TechnicalSession)




Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Jeffrey Falzarano, Texas A&M University Session Co-Chair: sander Calisal, University of British Columbia OMAE2011-49484 Time Domain Simulation of Two

Interacting Ships Advancing Parallel inWaves


OMAE2011-49493 Three-Dimensional Effects for a ShipExperiencing Large Amplitude RollMotion


OMAE2011-49644 Simulation of Ship Manoeuvring in theProximity of a Pier by using SupportVector Machines


OMAE2011-49494 A Piecewise Model for Prediction ofLarge Amplitude Ship Roll Damping


OMAE2011-49159 A BEM-ISOGEOMETRIC method withapplication to the wavemakingresistance problem of ships at constantspeed


6-20 Advanced Ship-Hydromechanics/Marine Technology - III (TechnicalSession)


Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Ronald W. Yeung, University of California at Berkeley

Session Co-Chair: Nuno Fonseca, Centre for Marine Technology andEngineering (CENTEC)

OMAE2011-49800 Tsunami attack evaluation andcountermeasures for moored small shipsin a port


OMAE2011-50249 Dynamic Parameter Estimation of aNonlinear Vessel Steering Model ofOcean Navigation


OMAE2011-49511 Identification of Ringing Events for aSlender Tubular Marine Structure


OMAE2011-49872 Kelvin ship wake in the wind waves fieldand on the finite sea depth


6-23 Model Tests - II (Technical Session)


Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Christian Schmittner, MARIN Session Co-Chair: Pedro Cardozo de Mello, University of São Paulo OMAE2011-49370 EFFECT OF WHIPPING AND SPRINGING

ON FATIGUE AND EXTREME LOADINGOF A 13000TEU CONTAINER VESSEL INBOW QUARTERING SEAS COMPAREDTO HEAD SEAS BASED ON MODELTESTS


OMAE2011-49579 Kinematics of Experimentally Generated Technical



Severe Wave Conditions andImplications for Numerical Models

Publication

OMAE2011-49390 Pressure Measurement on the Surface ofa Rigid Cylindrical Body during SlammingWave Impact


OMAE2011-49101 TESTING OF INFLATABLE STRUCTURESOF RAPIDLY DEPLOYABLE PORTINFRASTRUCTURES


6-24 Model Tests - III (Technical Session)


Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Sergio H. Sphaier, COPPE/UFRJ Session Co-Chair: Hans Cozijn, MARIN OMAE2011-49725 Impact Tests in Pure and Aerated Water Technical

Publication OMAE2011-49750 USP Active Absorption Basin: Absorption

of Irregular WavesTechnicalPublication

OMAE2011-49946 EXPERIMENTAL SET-UP FOR ANALYSISOF SUBSEA EQUIPMENT INSTALLATION


6-25 Model Tests - IV (Technical Session)


Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Hans Cozijn, MARIN Session Co-Chair: Sergio H. Sphaier, COPPE/UFRJ OMAE2011-49974 Statistical Analysis of a Set of Basin

WavesTechnicalPublication

OMAE2011-50156 Identification of Favourable Free FallParameters for the AGaPaS RescueCatamaran


OMAE2011-50316 Time Domain Comparison withExperiments for Ship Motions andStructural Loads of a Container Ship inExtreme Seas


6-26 Model Tests - V (Technical Session)


Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: sander Calisal, University of British Columbia

Session Co-Chair: Antonio C. Fernandes, Federal University of Rio deJaneiro

OMAE2011-50276 Spurious waves during generation ofmulti-chromatic waves in the wave tankin shallow water


OMAE2011-49826 Experimental investigations of offshoretriceratops under regular waves


OMAE2011-49398 Solution Verification and Validation inCFD – Review and Example of Use for




Wave Propagation OMAE2011-49268 3D Scour Of Submarine Pipeline: An

Experimental InvestigationTechnicalPublication

6-28 Towed and Undersea Cables and Pipes, Mooring, and BuoyTechnology - II (Technical Session)

Session Description:hydrodynamics; structural dynamics; cable laying; ocean construction,and design, and others.

Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: James Kaihatu, Texas A&M University Session Co-Chair: Said Mazaheri, National Institute for Oceanography OMAE2011-49281 Performance Evaluations of Taut-wire

Mooring Systems for Deepwater Semi-submersible Platform


OMAE2011-49797 Application of Groebner BasisMethodology to Nonlinear Analysis of anUnderwater Cable


OMAE2011-49714 Stochastic Response and StabilityAnalysis of Two-point Mooring System


6-29 Coastal Engineering - II (Technical Session)


Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors:

Session Chair: Tai-Wen Hsu, Department of Hydraulic and OceanEngineering, National Cheng Kung University

Session Co-Chair: James Kaihatu, Texas A&M University OMAE2011-49505 An Experimental Study of Effects of

Water Depth on Wave Scattering andMotion Responses of a Moored FloatingBreakwater in Regular Waves


OMAE2011-49668 Application of "Nonlinear FourierTransform (NFLT)" for the Analysis ofSoliton Fission behind Submerged Reefswith Finite Width


OMAE2011-49060 Numerical Study of Water WaveTransformation Over a Circular Bowl Pit


OMAE2011-49661 Complex wave investigations ofprotected marine water area


6-30 Coastal Engineering - III (Technical Session)


Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Said Mazaheri, National Institute for Oceanography Session Co-Chair: Markus Brühl, Technische Universität Braunschweig OMAE2011-49695 HYDRAULIC TRANSPORT OF

SAND/SHELL MIXTURESTechnicalPublication



OMAE2011-49815 Prediction of Cross-Shore Beach ProfileEvolution in the Vicinity of Seawalls


OMAE2011-49059 Equilibrium Depth Estimation of LocalScour Around Bridge Piers Using ArtificialNeural Networks


OMAE2011-49825 Prediction of water wave breaking heightand depth using ANFIS


6-31 Coastal Engineering - IV (Technical Session)


Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: René Huijsmans, Delft University of Technology Session Co-Chair: Keith MacHutchon, Coastal Marine Technology OMAE2011-49936 The Interaction of Tsunamis with Ocean

Swell: An Experimental StudyTechnicalPublication

OMAE2011-49839 Response bahaviour of perforatedcylinders in regular waves


OMAE2011-49977 Set-up due to random waves: influenceof the directional spectrum


6-34 Ocean Measurement and Data Interpretation - II (TechnicalSession)


Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Gus Jeans, Fugro GEOS Session Co-Chair: Michele Drago, Saipem Energy Services OMAE2011-49895 Radar Measurement of Ocean Waves Technical

Publication OMAE2011-49900 Measurements of Surface Waves using

Low-Grazing Angle High-ResolutionPulse-Doppler Radar


OMAE2011-49934 Statistics for Greater Sea States TechnicalPublication

OMAE2011-50086 Estimation of Tropical Cyclone HeatPotential from Oceanic Measurements


6-35 Ocean Measurement and Data Interpretation - III (TechnicalSession)





Session Chair: René Huijsmans, Delft University of Technology Session Co-Chair: Keith MacHutchon, Coastal Marine Technology OMAE2011-50109 Detecting the phytoplankton bloom from

satellite imagesTechnicalPublication

OMAE2011-49894 Shipboard Measurement of OceanWaves


OMAE2011-50275 Estimators of Wave Peak Period forLarge Return Period Seastates


OMAE2011-50138 The WAG platform structural effectsstudy


SYMP 7 Polar and Arctic Sciences and Technology Expand All Sessions InSymposia Symposium Coordinator: Walter Kuehnlein, SEA2ICE Ltd. & Co. KG 7-1 Numerical Ice Modeling (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Venkat Krishnan, ExxonMobil Upstream Research Session Co-Chair: Walter Kuehnlein, SEA2ICE Ltd. & Co. KG OMAE2011-50357 Challenge Arctic Keynote OMAE2011-49115 Numerical simulation of moored ship in

level iceTechnicalPublication

OMAE2011-50337 Computational Methods for SolvingDynamic Ice Structure InteractionProblems


OMAE2011-49154 ADWICE: ADvanced Weathervaning inICE


7-2 Ice Model Tests and Analysis of Full Scale Data (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Ibrahim Konuk, Technip USA, Inc. Session Co-Chair: Walter Kuehnlein, SEA2ICE Ltd. & Co. KG OMAE2011-49380 Ice Model Testing Of Structures with a

Downward Breaking Cone in theWaterline Jip: Presentation, Set-Up &Objectives


OMAE2011-49482 The study on the Ice Sea trial in ChukchiSea using Korean Icebreaker Araon


OMAE2011-50066 Full Scale Measurement on Level IceResistance of Icebreaker


OMAE2011-50064 Safety Assessment of CargoContainment Systems in LNG Carriersunder the Impact of Iceberg-ShipCollision


7-3 Structures in Ice (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Per Kristian Bruun, Aker Solutions Session Co-Chair: Walter Kuehnlein, SEA2ICE Ltd. & Co. KG OMAE2011-49137 A Novel Design of Mobile Offshore

Drilling Unit for Arctic ConditionsTechnicalPublication

OMAE2011-50028 Analysis of ship-iceberg impact loadsbased on Bayesian Network method


OMAE2011-50120 On The Dynamic Interaction BetweenDrifting Level Ice And Moored




Downward Conical Structures: A CriticalAssessment Of The Applicability Of ABeam Model For The Ice

OMAE2011-49663 First Offshore Windmill Foundation forHeavy Ice Conditions


7-4 Operations in Ice and Structural Integrity (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Charlotte van de Kerk, The Offshore Partners B.V. Session Co-Chair: Walter Kuehnlein, SEA2ICE Ltd. & Co. KG OMAE2011-49499 Development of Hull Forms for a

190,000 DWT Icebreaking Ore CarrierTechnicalPublication

OMAE2011-49355 Analysis of Towing-Gear Concepts usingIceberg Towing Simulations


OMAE2011-49402 Improved Structural Integrity for ArcticDesigns by Ignition Isolation Control


7-5 Evacuation in Ice (Technical Session) Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Walter Kuehnlein, SEA2ICE Ltd. & Co. KG Session Co-Chair: Charlotte van de Kerk, The Offshore Partners B.V. OMAE2011-49243 Hyperbaric Evacuation in the Arctic and

Cold Climate regionsTechnicalPublication

OMAE2011-49479 Secure launch of lifeboat in cold climate,looking into requirements forwinterization


OMAE2011-50358 Evacuation Challenges for Shallow IceCovered Waters


SYMP 8 CFD and VIV Expand All Sessions In Symposia Symposium Coordinator: Owen Oakley, Jr., Chevron Energy Technology Co 8-1 Cylinder VIV - 1 (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Charles Dalton, University of Houston Session Co-Chair: Owen Oakley, Jr., Chevron Energy Technology Co OMAE2011-50302 SELECTIVE ROUGHNESS IN THE

BOUNDARY LAYER TO SUPPRESS FLOW-INDUCED MOTIONS OF CIRCULARCYLINDER AT 30,000<120,000< td>


OMAE2011-50311 RANS SIMULATION VS. EXPERIMENTALMEASUREMENTS OF FLOW INDUCEDMOTION OF CIRCULAR CYLINDER WITHPASSIVE TURBULENCE CONTROL FOR30,000<120,000< td>


OMAE2011-49049 Reynolds Number Range effect onVortex-Induced Vibration on a CircularCylinder with Low Mass-DampingParameter


OMAE2011-50004 Uniform Flow past a Rotary-OscillatingCircular Cylinder


8-2 Cylinder VIV - 2 (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors:



Session Chair: Michael Bernitsas, University of Michigan

Session Co-Chair: Vikas Jhingran, Shell Exploration and ProductionInternational

OMAE2011-50074 Numerical investigation of vortex-induced (VIV) vibration of a circularcylinder in oscillatory flow


OMAE2011-50187 Further Investigations on Vortex SelfInduced Vibration (VSIV)


OMAE2011-50196 Numerical Study of the Influence ofInitial Condition in the Vortex InducedVibration of a Circular Cylinder with TwoDegree of Freedom.


OMAE2011-49438 Experimental and Numerical Analysis ofForced Motion of A Circular Cylinder


OMAE2011-49525 TWO-DIMENSIONAL NUMERICALSIMULATION OF FLOW AROUNDRECTANGULAR STRUCTURES WITHDIFFERENT ASPECT RATIOS


8-3 Free Surface Flows - Numerics (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Fahd Fathi, SBM GustoMSC Session Co-Chair: Allan Magee, Technip Geoproduction Malaysia OMAE2011-49220 Simulation of free surface benchmark

problems using level set and SPHMethods


OMAE2011-49779 Variational Discontinuous Galerkin FiniteElement Modeling of Free Surface Waves


OMAE2011-49979 Towards a General-Purpose OpenBoundary Condition For WaveSimulations


OMAE2011-50220 AN IMPROVED ANTI-DIFFUSIVE VOFMETHOD TO PREDICT TWO-FLUID FREESURFACE FLOWS


8-4 Free Surface Flows (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Allan Magee, Technip Geoproduction Malaysia Session Co-Chair: Fahd Fathi, SBM GustoMSC OMAE2011-49488 Extreme Wave Impact On Offshore

Platforms And Coastal ConstructionsTechnicalPublication

OMAE2011-49287 Sub-Critical Flow Pattern around A Pierin Rectangular Open Channel


OMAE2011-49651 Surface Piercing Drag In CFD TechnicalPublication

OMAE2011-49408 Comparative Study Of Slamming LoadsOn Cylindrical Structures


OMAE2011-50123 A Numerical Investigation on 2d and 3DSloshing Effects


8-5 Free Surface Flows - Wave Generation & Impact (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Arthur Veldman, University of Groningen

Session Co-Chair: Guangqiang Yang, ExxonMobil Upstream Research



Company OMAE2011-49418 CFD Analysis of Deck Impact in Irregular

Waves: Wave Representation UsingTransient Wave Groups


OMAE2011-49572 Irregular Wave Loads on a GravityBased Foundation on Thornton Bank inShallow Water


OMAE2011-49292 Research on the Time-Frequency EnergyStructure of Freak Wave Generation andEvolution


OMAE2011-49047 CFD Modeling of a Submersible in aRealistic Surfaced Sea State Conditionfor Predictions of Hydrodynamic WaveImpact Loading


8-6 Cylinder VIV - Suppression & Stability (Technical Session) Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Hayden Marcollo, AMOG Consulting Session Co-Chair: Carl Martin Larsen, CeSOS, Dep. of marine technology OMAE2011-49403 ANALYSIS OF PHENOMENOLOGICAL

MODELS OF VORTEX INDUCEDVIBRATIONS


OMAE2011-49274 Defining a parameter of effectiveness forthe suppression of vortex-inducedvibration


OMAE2011-49665 SUPPRESSING VORTEX INDUCEDVIBRATION OF AN ELASTIC MOUNTEDCIRCULAR CYLINDER BY WAVY WALL


OMAE2011-50309 Direct numerical simulation of effects ofsmall angle of incidence on HonjiInstability


8-7 Cylinders - Wakes & Interference 1 (Technical Session) Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Juan Pontaza, Shell Projects & Technology Session Co-Chair: Raghu Menon, Shell Projects & Technology OMAE2011-49478 Vortex-Induced Vibration of Two

Mechanically Coupled Circular Cylindersof Different Diameters in Steady Flow


OMAE2011-49126 Numerical Study of an OscillatingSmaller Cylinder in the Wake of anUpstream Larger Cylinder


OMAE2011-49405 Multi-Cylinder Flow-Induced Motions:Enhancement by Passive TurbulenceControl at 28,000<120,000< td>


OMAE2011-49655 Three-Dimensional Analysis for Vortex-Induced Vibrations of an UpstreamCircular Cylinder in Two Tandem CircularCylinders


8-8 Cylinders - Wakes & Interference 2 (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Raghu Menon, Shell Projects & Technology Session Co-Chair: Juan Pontaza, Shell Projects & Technology OMAE2011-49068 Sensitivity Analysis of a Generic Wake- Technical



Body Model for the Vortex-InducedVibration of a Rigid Circular CylinderUsing Monte Carlo Simulations

Publication

OMAE2011-49578 Numerical Study of Oscillatory Flow PastFour Cylinders in Square Arrangementfor Pitch Ratio Equal to 4


OMAE2011-49776 An experimental study of the cross-flowon a pair of stagered cylinders subjectto forced oscillations


OMAE2011-49407 CFD Based Hydrodynamic Databases forWake Interference Assessment


8-9 VIV Suppression, Wakes & Free Spans (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Carl Martin Larsen, CeSOS, Dep. of marine technology Session Co-Chair: Steve Cosgrove, ACUSIM Software, Inc. OMAE2011-49966 Importance of added mass for the

interaction between IL and CF vibrationsof free spanning pipelines


OMAE2011-49075 Wake of a Vibrating Cylinder at ReynoldsNumber 10^5


OMAE2011-49379 VIV And Fatigue Of Small-Bore Piping InManifold Structures


OMAE2011-49522 The effect of rotational friction on thestability of short-tailed fairingssuppressing vortex-induced vibrations


8-10 Pipeline & Multi-phase Flow (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Steve Cosgrove, ACUSIM Software, Inc. Session Co-Chair: Yahya Modarres-Sadeghi, University of Massachusetts OMAE2011-49514 CFD for multiphase flow transport in

pipelinesTechnicalPublication

OMAE2011-50029 SPH Simulation of Hydrodynamic Forceson Subsea Pipelines


OMAE2011-50062 Flow-Induced Vibrations of SubseaJumpers due to Internal Multi-PhaseFlow


OMAE2011-49111 Numerical Computation of SuspendedSediments around a Marine Pipelineclose to the Flat Seabed


8-11 CFD Applications (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Yiannis Constantinides, Chevron Session Co-Chair: Samuel Holmes, Red Wing Engineering, Inc. OMAE2011-49448 Numerical Investigation of the Effect of

a Pier's Shape on the Mitigation ofScouring


OMAE2011-50040 CFD Analysis of Uncontrolled Flow inAlanya Dim Dam Derivation Tunnel


OMAE2011-49528 Numerical simulation of the backfillingprocess of a trench using a TrailingSuction Hopper Dredge


OMAE2011-49869 Numerical Simulation of Fire Suppression Technical



in a Ship Accommodation Deck UsingCFD

Publication

8-12 CFD Methods & Cylinder VIV (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Samuel Holmes, Red Wing Engineering, Inc. Session Co-Chair: Yiannis Constantinides, Chevron OMAE2011-49197 Multiphysics SPH Simulations with Local

Particle CoarseningTechnicalPublication

OMAE2011-50078 Random Collocation Method TechnicalPublication

OMAE2011-50332 Parallelization of LBM Code using CUDACapable GPU Platform for 3D Single andTwo-Sided Non-Facing Lid-Driven CavityFlow


OMAE2011-49561 A Basic Research on the VIV Responseof Rotating Circular Cylinder in Flow


OMAE2011-49573 Numerical simulation on vortex-inducedvibration of an elastically mountedcircular cylinder with two-degree-offreedom


8-13 Risers - 1 (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Rene Gabbai, The Catholic University of America Session Co-Chair: Halvor Lie, Marintek OMAE2011-49046 Experimental Investigation On Vortex-

Induced Vibration Of Risers WithStaggered Buoyancy


OMAE2011-49610 A Numerical Model of Vortex-InducedVibration on Marine Risers


OMAE2011-50145 VIV Prediction of A Truss Spar Pull-TubeArray using CFD


OMAE2011-50225 Flow Induced Forces on Multi-PlanarRigid Jumper Systems


8-14 Risers - Fatigue & Suppression (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Halvor Lie, Marintek Session Co-Chair: Rene Gabbai, The Catholic University of America OMAE2011-50178 Modeling VIV Supression using negative

lift coefficientsTechnicalPublication

OMAE2011-50231 A Data-Driven Mode IdentificationAlgorithm for Fatigue DamageAssessment in Instrumented MarineRisers


OMAE2011-50235 Empirical Procedures for Long-TermPrediction of Fatigue Damage for anInstrumented Marine Riser


OMAE2011-49820 Reliability Based Factors of Safety forRiser VIV Fatigue using High Mode VIVTests


8-15 Risers - 2 (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM



Session Sponsors: Session Chair: J. Kim Vandiver, Massachusetts Institute of Technology Session Co-Chair: Yuming Liu, Massachusetts Institute of Technology OMAE2011-49042 EXPERIMENTAL INVESTIGATION ON VIV

OF THE FLEXIBLE MODEL UNDER FULLSCALE Re NUMBER


OMAE2011-49469 Efficient Modal Decomposition andReconstruction of Riser Response due toVIV


OMAE2011-49539 Towards a Time-Domain Finite ElementAnalysis of Vortex Induced Vibrations


OMAE2011-50192 'Vortex-Induced Vibration Analysis(VIVA) Based on HydrodynamicDatabases'


8-16 Floaters - Ship Maneuvering & Roll (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Yuming Liu, Massachusetts Institute of Technology Session Co-Chair: J. Kim Vandiver, Massachusetts Institute of Technology OMAE2011-49018 Ship Motions from Unsteady

Maneuvering in Two-DimensionalWaves, Part I: Numerical Simulations


OMAE2011-49019 Ship Motions from UnsteadyManeuvering in Two-DimensionalWaves, Part II: Analysis of Data


OMAE2011-49085 Predicting Roll Added Mass and Dampingof a Ship Hull Section using CFD


OMAE2011-50136 Urans Simulation of an Appended HullDuring Steady Turn With PropellerRepresented by an Actuator Disk Model


8-17 Risers - 3 (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Michael Triantafyllou, MIT Session Co-Chair: Steve Leverette, SBM Atlantia OMAE2011-49728 Effect of higher stress harmonics and

spectral width on fatigue damage ofmarine risers


OMAE2011-49817 Modeling risers with partial strakecoverage


OMAE2011-49208 A Simplified Approach To Estimate WakeInduced Oscillations In Risers Arrays


OMAE2011-49821 Traveling Wave Response in Full-ScaleDrilling Riser VIV Measurements


8-18 Risers - 4 (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Steve Leverette, SBM Atlantia

Session Co-Chair: Guangqiang Yang, ExxonMobil Upstream ResearchCompany

OMAE2011-49435 A Double Birkhoff Wake Oscillator forthe Modeling of Vortex-InducedVibration


OMAE2011-49057 Fluid-structure energy transfer of atensioned beam subject to vortex-




induced vibrations in shear flow OMAE2011-49296 A Finite Element Study of Multi-mode

VIV of Slender Riser Experiencing Non-uniform Flow


OMAE2011-49552 VIV Response Inference from TensionMeasurements


8-19 Risers - 5 (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Dr. Michael Tognarelli, BP America Production Co. Session Co-Chair: Luis Eca, IST-UTL OMAE2011-49065 Slender Buoy VIM and VIR Analysis by

CFD/FSI ApproachTechnicalPublication

OMAE2011-49295 Effects of Varying Tension and Stiffnesson Dynamic Characteristics and VIV ofSlender Riser


OMAE2011-49329 Flat Buoy Concept for Free StandingRiser Application: An Improvement ofthe In-Place Hydrodynamic Behaviour.


OMAE2011-49677 An Experimental Study about the Effectthat Vibration Mode Change Gives RiserVIV


8-20 Floaters - Semisubmersibles & Spars (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Prashant Soni, Det Norske Veritas (DNV) Session Co-Chair: Krish Thiagarajan, The University of Western Australia OMAE2011-49437 CFD Simulation of Flow-Induced Motions

of a Multi-Column Floating PlatformTechnicalPublication

OMAE2011-49010 Experimental Study of Vortex-inducedMotions (VIM) on a Large-Volume Semi-Submersible Platform


OMAE2011-49011 Experimental Comparisons to Assure TheSimiliarity Between VIM (Vortex-InducedMotion) and VIV (Vortex-InducedVibration) Phenomena


OMAE2011-50229 Hydro-Dynamic Simulation of aCylindrical Buoy for Wave EnergyConversion


8-21 Floaters - Semisubmersibles (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Tim Bunnik, Marin Session Co-Chair: William Bowen, University of Canterbury OMAE2011-49119 Model Test and CFD Verification of New

Semisubmersible Designs for LowVortex-induced Motion


OMAE2011-49236 Calculation of wave forces and internalloads on a semi-submersible at shallowdraft using an IVOF method


OMAE2011-49433 Benchmark Study on Thruster-hullInteraction on a Semi-submersible CraneVessel


OMAE2011-49204 Model-Scale and Full-Scale CFDCalculations for Current Loads on Semi-




Submersible 8-22 Floaters - Ships & Multi Column Floaters (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors:

Session Chair: Arjen Koop, MARIN (MAritime Research InstituteNetherlands)

Session Co-Chair: Tim Bunnik, Marin OMAE2011-49893 A NUMERICAL STUDY ON SQUAT OF A

WIGLEY HULLTechnicalPublication

OMAE2011-49616 A Numerical Study on Water Flooding ina Damaged Oil Carrier


OMAE2011-50347 Vortex Induced Motion (VIM)Performance of the Multi Column Floater(MCF): Drilling and Production Unit


OMAE2011-49151 Model Tests for VIM of Multi-ColumnFloating Platforms


8-23 Panel on CFD & VIV Benchmarking (Technical Session) Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Owen Oakley, Jr., Chevron Energy Technology Co Session Co-Chair: Hayden Marcollo, AMOG Consulting

SYMP 9 Ocean Renewable Energy Expand All Sessions In Symposia Symposium Coordinator: Charles Smith, Petroleum Research Atlantic Canada Symposium Co-Coordinator: R.C. Ertekin, University of Hawaii at Manoa 9-1 Ocean Renewable Energy - (Opening Session) (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Charles Smith, Petroleum Research Atlantic Canada Session Co-Chair: Teresa Pontes, IDMEC / IST OMAE2011-49193 Accelerating the Deployment of Offshore

Renewable Energy Technologies(ADORET) - Presentation, Findings andRecommendations


OMAE2011-49275 Technological Alternatives to ExtractMarine Energy in Colombia


OMAE2011-50346 Modeling Wave Energy Resources In TheIrish West Coast


OMAE2011-50117 Marine Scour and Offshore Wind -Lessons Learnt and Future Challenges


9-2 Wave Energy l (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: AbuBakr S. Bahaj, University of Southampton

Session Co-Chair: Antonio Falcao, Technical University of Lisbon -Instituto Superior Técnico

OMAE2011-49810 The Adequacy of Phase-averagedModels for Modelling Wave Farms


OMAE2011-49071 Study on Wave Power Generator UsingFlexible Piezoelectric Device


OMAE2011-49083 Numerical Studies on Floating OWCHydrodynamics


OMAE2011-49830 DESIGN AND EFFICIENCY ANALYSIS OFA MECHANICAL WAVE ENERGYCONVERTER




OMAE2011-50359 SITE SELECTION IN PORTUGAL FOROFFSHORE WAVE FARMS


9-3 Wind Energy l (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Henrik Bredmose, DTU Mechanical Engineering Session Co-Chair: Charles Smith, Petroleum Research Atlantic Canada OMAE2011-49063 On the necessity of technology

qualification in the offshore wind energyindustry


OMAE2011-49563 The dynamic response of an offshorewind turbine with realistic flexibility tobreaking wave impact


OMAE2011-49743 A Conceptual Design Method forParametric Study of Blades for OffshoreWind Turbines


OMAE2011-49171 Effect of Plunging Oscillation on anOffshore Wind Turbine Blade Section


9-4 Current Energy l (Technical Session) Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors:

Session Chair: Ye Li, National Renewable Energy Laboratory - WindTechnology Center

Session Co-Chair: Jennifer matthews, Offshore Energy ResearchAssociations

OMAE2011-49122 Feasibility analysis for the application ofTidal Current Power Farm


OMAE2011-49549 Power Quality Performance Of The TidalEnergy Converter, SeaGen


OMAE2011-49994 Modelling Techniques for UnderwaterNoise Generated by Tidal Turbines inShallow Waters


OMAE2011-50290 Hydrokinetic Energy Harnessing UsingThe Vivace Converter With PassiveTurbulence Control


9-5 Wind, Wave and Current Energy (Technical Session) Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Madasamy Arockiasamy, Florida Atlantic University OMAE2011-49477 Alleviation of fatigue in renewable

energy support structuresTechnicalPublication

OMAE2011-49953 Grid Integration of Wave and TidalEnergy


OMAE2011-49923 Basic Parameters of Working Model ofFloating Offshore Power Farm


OMAE2011-49709 Irregular wave forces on monopilefoundations. Effect of full nonlinearityand bed slope


9-6 Wave Energy ll (Technical Session) Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Teresa Pontes, IDMEC / IST



Session Co-Chair: John Sharp, Cranfield University OMAE2011-49135 Analysis of a Two-Body Floating Wave

Energy Converter with Particular Focuson the Effect of Mooring System onEnergy Capture


OMAE2011-49419 A System for Wave Driven Desalinationof Seawater


OMAE2011-49426 PHASE AVERAGED FLOW ANALYSIS INAN OSCILLATING WATER COLUMNWAVE ENERGY CONVERTER


OMAE2011-49127 EFFECT OF DESIGN PARMETERS ONAERO-ACOUSTIC AND AERODYNAMICPERFORMANCE OF WELLS TURBINES


9-7 Wind energy ll (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Gunjit Bir, Clipper Windpower (United Technologies)

Session Co-Chair: M. Philippe, Laboratoire de Mécanique des Fluides(CNRS UMR 6598), Ecole Centrale Nantes

OMAE2011-49722 Comparison of Time and FrequencyDomain Simulations of an OffshoreFloating Wind Turbine


OMAE2011-49129 Installation of monopiles for offshorewind turbines – by using end-caps and asubsea holding structure


OMAE2011-49094 Dynamic Response Analysis of theOffshore Wind Turbine Support StructureUnder Extreme Conditions


OMAE2011-50264 Short and Long Terms ExtremeReliability Analysis applied to FloatingWind Turbine Design


OMAE2011-49138 Wind Turbine Installation Vessel of aNew Generation


9-8 Current Energy ll (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Bruce Cameron, Nova Scotia Department of Energy


OMAE2011-49491 Tidal Energy in Nova Scotia, Canada –Current state of North Americancooperation on Ocean Renewable Energyand Nova Scotia's legislative and policyframework


OMAE2011-49246 Tidal Energy in Nova Scotia, Canada -The Fundy Ocean Research Centre forEnergy (FORCE) Perspective


OMAE2011-49249 Tidal Energy in Nova Scotia, Canada –Assessment of the Potential of TidalPower from Minas Passage and MinasBasin


OMAE2011-50348 Tidal Energy in Nova Scotia, Canada -Defining Ocean Energy ResearchOpportunities and Challenges


9-9 Wave Energy lll (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM



Session Sponsors: Session Chair: Teresa Pontes, IDMEC / IST Session Co-Chair: Solomon Yim, Oregon State University OMAE2011-50336 Development of a Novel 1:7 Scale Wave

Energy ConverterTechnicalPublication

OMAE2011-49117 Modelling of the IPS Buoy Wave EnergyConverter Including the Effect of Non-uniform Tube Cross-section


OMAE2011-50001 PRELIMINARY RESULTS OF A RANSSIMULATION FOR A POINT ABSORBERWAVE ENERGY SYSTEM


OMAE2011-50291 Near-Field Flow Downstream Of ABarrage: Experiments, 3-D CFD AndDepth-Averaged Modelling


9-10 Wind Energy lll (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Lance Manuel, University of Texas at Austin Session Co-Chair: Henrik Bredmose, DTU Mechanical Engineering OMAE2011-49225 Nonlinear two stage control strategy of

a wind turbine for mechanical load andextreme moment reduction.


OMAE2011-49307 Statistical Uncertainty Analysis Of TheLong-term Distribution of Wind- andWave- Induced Hot-spot Stress ForFatigue Design Of Jacket Wind TurbineBased On Time Domain Simulations


OMAE2011-50147 Decentralised Control Design for LoadMitigation in Horizontal Axis WindTurbines (HAWTs)


OMAE2011-49847 Offshore wind farm construction; easier,safer and more cost effective


9-11 Current Energy lll (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors:

Session Chair: Ye Li, National Renewable Energy Laboratory - WindTechnology Center

Session Co-Chair: Jon Mikkelsen, University of British Columbia OMAE2011-49140 Design and Analysis of a Rotor Blade

Optimized for Extracting Power From theFlorida Current


OMAE2011-49377 Hydrodynamic Design and Analysis ofHorizontal Axis Marine Current TurbinesWith Lifting Line and Panel Methods


OMAE2011-49681 DEVELOPMENT OF A VERTICAL AXISTYPE MARINE TURBINE MODEL WITHVARIABLE-PITCH BLADES AND ITSBASIC PERFORMANCE


OMAE2011-49740 Tidal Turbine Blades: Design andDynamic Loads Estimation Using CFDand Blade Element Momentum Theory


9-12 Wave Energy lV (Technical Session) Session Schedule: Thursday, June 23, 2011 03:30 PM-05:30 PM Session Sponsors:

Session Chair: Antonio Falcao, Technical University of Lisbon - Instituto



Superior Técnico Session Co-Chair: Wei Qiu, Memorial University OMAE2011-49014 Design of an Oscillating Water Column

around the Columns of the WindFloat.TechnicalPublication

OMAE2011-49212 Experimental Wave Generation andCancellation with a Cycloidal WaveEnergy Converter


OMAE2011-49262 Cancellation of Non-Harmonic WavesUsing a Cycloidal Turbine


OMAE2011-49263 Modelling and Simulation of a FloatingOscillating Water Column


OMAE2011-49517 Development of Utility Scale BuoyantEnergy Storage Technology


9-13 Wind Energy lV (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Gunjit Bir, Clipper Windpower (United Technologies) Session Co-Chair: Charles Smith, Petroleum Research Atlantic Canada OMAE2011-49338 Design Drivers for Offshore Wind

Turbine Jacket Support StructuresTechnicalPublication

OMAE2011-49492 Effect of Foundation ModelingMethodology on the Dynamic Responseof Offshore Wind Turbine SupportStructures


OMAE2011-49785 Vertical wave impacts on offshore windturbine inspection platforms


OMAE2011-49793 Model Experiments on the Motion of aSPAR Type Floating Wind Turbine inWind and Waves


9-14 Current Energy lV (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Madasamy Arockiasamy, Florida Atlantic University Session Co-Chair: Jon Mikkelsen, University of British Columbia OMAE2011-49863 DEVELOPMENT AND VERIFICATION OF

A COMPUTATIONAL FLUID DYNAMICSMODEL OF A HORIZONTAL-AXIS TIDALCURRENT TURBINE


OMAE2011-50325 Mathematical Modeling and NumericalSimulation of Fluid Flow Effects onMarine Current Turbines


OMAE2011-50175 Passive Energy Extraction throughOscillation of a Yawing Flat PlateOperating in a Uniform Current


OMAE2011-49922 Flow Energy Harvesting by FlutteringSlender Bodies in Axial Currents


9-15 Wave Energy V (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Joao Cruz, GL Garrad Hassan Session Co-Chair: Wei Qiu, Memorial University OMAE2011-49015 Design of a Point Absorber inside the

WindFloat StructureTechnicalPublication

OMAE2011-49347 Introducing Wave Regeneration by Windin a Mild-Slope Wave Propagation




Model, MILDwave to Investigate theWake Effects in the Lee of a Farm ofWave Energy Converters

OMAE2011-49360 Power absorption Measures andComparisons of Selected Wave EnergyConverters


OMAE2011-49845 Validation of a New Wave EnergyConverter Modelling Tool - Application tothe Columbia Power WEC


OMAE2011-49560 Development and Testing of a PointAbsorber Wave Energy Conversion


9-16 Wind Energy V (Technical Session) Session Schedule: Wednesday, June 22, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Charles Smith, Petroleum Research Atlantic Canada Session Co-Chair: Gunjit Bir, Clipper Windpower (United Technologies) OMAE2011-49985 WindOpt – an optimization tool for

floating support structures for deepwater wind turbines


OMAE2011-50118 Numerical tower shadow modeling for adownwind wind turbine truss tower


OMAE2011-49490 Hydrodynamic and Aerodynamic Loadson the Behaviour of Offshore Wind Farm


OMAE2011-50329 Study on the Dynamic Response forFloating Foundation of Offshore WindTurbine


9-17 Current Energy V (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Jon Mikkelsen, University of British Columbia Session Co-Chair: Madasamy Arockiasamy, Florida Atlantic University OMAE2011-49752 Simulation and Prediction of Loads in

Marine Current Turbine Full-Scale RotorBlades.


OMAE2011-50063 Structural Design of a Horizontal-AxisTidal Current Turbine Composite Blade


OMAE2011-49943 Tidal Turbine Blade Selection for OptimalPerformance in a Bi-directional Array


OMAE2011-49749 SHIVA project : CFD Simulation andExperimental Validation of a VariablePitch Cross-Flow Marine Current Turbinefor Maximize Hydropower Extraction


9-18 Wave Energy Vl (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Wei Qiu, Memorial University Session Co-Chair: Joao Cruz, GL Garrad Hassan OMAE2011-49372 FEASIBILITY STUDY OF A WAVE

ENERGY FARM IN THE WESTERNMEDITERRANEAN SEA: COMPARISONAMONG DIFFERENT TECHNOLOGIES


OMAE2011-50105 INFLUENCE OF THE GUIDE VANESSOLIDITY ON THE PERFORMANCE OF ARADIAL IMPULSE TURBINE WITHPITCH-CONTROLLED GUIDE VANES




OMAE2011-49955 Optimization of mooring configurationparameters of floating wave energyconverters


OMAE2011-49685 Expected Values of Wave PowerAbsorption around the Japanese IslandsUsing OWC Types with Projecting Walls


9-19 Wind Energy Vl (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Dominique Roddier, Marine Innovation & Technology Session Co-Chair: Lance Manuel, University of Texas at Austin OMAE2011-50072 Long-Term Reliability Analysis of a Spar

Buoy-Supported Floating Offshore WindTurbine


OMAE2011-50088 Global analysis of a floating wind turbineusing an aero-hydro-elastic numericalmodel. Part 2 : Benchmark study.


OMAE2011-50114 Global Analysis of a Floating WindTurbine Using an Aero-Hydro-ElasticModel. Part1: Code Development andCase Study


OMAE2011-50278 A Generic 5 MW WindFloat for NumericalTool Validations & Comparison Against ageneric Spar


9-20 Current Energy Vl (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Teresa Pontes, IDMEC / IST


OMAE2011-49098 Extracting energy from free streamsthrough a novel von Karman vortexshedding device


OMAE2011-49760 Reliability-based fatigue life estimationof ocean current turbine rotor blades


OMAE2011-50338 Effects of Tidal Stream Turbines onMaterial Transport


OMAE2011-50008 Efficiency and Optimal Loading ofContra-rotating Marine Turbines


9-21 Wave Energy Vll (Technical Session) Session Schedule: Thursday, June 23, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Joao Cruz, GL Garrad Hassan Session Co-Chair: Wei Qiu, Memorial University OMAE2011-49502 A finite element model for efficiency of a

moored floating OWC deviceTechnicalPublication

OMAE2011-49532 System Identification of a FloatingOscillating Water Column Wave EnergyConverter


OMAE2011-49684 Analysis and Dynamic Scaling ofTethered Wave Energy Converters inIrregular Waves


OMAE2011-50228 Three Dimensional LES Simulation of Bi-Directional Turbine for Wave Energy


SYMP 10 Offshore Geotechnics Expand All Sessions In Symposia



Symposium Coordinator: Horst Brandes, University of Hawaii

Symposium Co-Coordinator: Dong-Sheng Jeng, Shanghai Jiao TongUniversity

10-1 General Offshore Geotechnics (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Mehmet Ulker, North Carolina State University OMAE2011-49497 A REVIEW OF FOUNDATION CONCEPTS

FOR IN-STREAM TIDAL TURBINESYSTEMS


OMAE2011-50245 The effect of drainage condition onmeasurements by a piezoballpenetrometer


OMAE2011-49073 Vertical and Horizontal Migration of GasThrough the Marine Sediments of theGulf of Mexico


OMAE2011-49788 In-situ Sea Floor Site Characterization inthe Gulf of California


OMAE2011-49422 Engineering Properties of CarbonateMarine Sediments


10-2 Suction Caissons (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors:

Session Chair: Sangchul Bang, South Dakota School of Mines &Technology

OMAE2011-49077 Caisson Capacity in Clay: VHMResistance Envelope - Part 3: Extensionto shallow foundations


OMAE2011-49058 Pullout Capacity of Suction Piles in Clayunder Eccentric Vertical Loads


OMAE2011-49871 Suction Pile Foundations: Experience inthe Mediterranean Offshore andInstallation Feedback


OMAE2011-49319 SET-UP PROCESS AND PULLOUTCHARACTERISTIC OF SUCTIONCAISSON IN SOFT CLAY


OMAE2011-49302 Numerical Modeling Of Pull-Out CapacityOf Suction Caisson Under Different LoadInclination Angles


10-3 Fluid-Soil-Structure Interaction (Technical Session) Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Dong-Sheng Jeng, Shanghai Jiao Tong University OMAE2011-49232 Constructing the Shields curve Technical

Publication OMAE2011-49555 HHT Analysis on Pore Pressure

Dissipation of Wave-induced Fluidizationin a Sandy Bed


OMAE2011-49523 Measured and Analytical Studies ofDynamic Ocean Water Pressure againsta Vertical Caisson during a RealEarthquake


OMAE2011-49856 Dynamic Pore Pressure Response of TwoLayer Seabed Under Progressive Waves


OMAE2011-49316 Spudcan Penetration in Clay-sand-clay Technical



Soils Publication OMAE2011-49328 Large Displacement Finite Element

Analysis of Submarine Slide Due to GasHydrate Dissociation


10-4 Seabed Processes and Mechanics (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Ayman Eltaher, MCS Kenny OMAE2011-49226 SIMULATION OF PASSIVE SOIL FAILURE

& CUTTING PROCESSES IN SANDTechnicalPublication

OMAE2011-49233 Soil Cutting Processes, The Cutting ofWater Saturated Sand


OMAE2011-49299 Ultimate Capacity Of Suction CaissonsUnder Axial Loads


OMAE2011-49391 CYCLIC RESPONSE OF GRANULARSUBSOIL UNDER A GRAVITY BASEFOUNDATION FOR OFFSHORE WINDTURBINES


OMAE2011-49428 Shakedown Analysis of OffshorePlatform under Varied CombinedLoading


10-5 Anchors (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Conleth O'Loughlin OMAE2011-49301 Estimation Of Suction Caisson Lateral

Capacity In Cohesive SoilsTechnicalPublication

OMAE2011-49646 Numerical simulation of installed torpedoanchors embedded in cohesive soil


OMAE2011-50128 LATERAL RESPONSE OF OFFSHOREANCHOR PILES SUBJECTED TOMOORING FORCES USING CENTRIFUGETESTS


OMAE2011-49423 Study of Failure Modes of SuctionAnchors


10-6 Jack-Up and Spud Can Foundations (Technical Session) Session Schedule: Thursday, June 23, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Jelke Dijkstra, Delft University of Technology OMAE2011-49072 Experimental Investigation of the

Undrained Response of a ShallowSkirted Foundation Subjected to VerticalCompression and Uplift


OMAE2011-49928 Numerical studies of installation andextraction processes of jack-up ships


OMAE2011-49628 Dynamic Analysis of Jack-up PlatformsSubjected to Waves Considering Soil-Structure Interaction


OMAE2011-50068 Experimental Investigation into PileDiameter Effects of Laterally LoadedMono-Piles


10-7 Pipeline Geotechnics (Technical Session) Session Schedule: Thursday, June 23, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Peter Larkin, Senergy



OMAE2011-50230 Offshore Pipeline Embedment inCohesive Soil – A Comparison betweenExisting and CEL Solutions


OMAE2011-49037 THE RESISTANCE OF SOIL BERMSDURING LATERAL BUCKLING OFPIPELINES ON SOFT CLAY: ANINTERPRETATION OF CENTRIFUGEMODELLING DATA


OMAE2011-49124 Lateral Movement of Pipelines on a SoftClay Seabed: Large Deformation FiniteElement Analysis


OMAE2011-49399 Faecal Pellets In Deep Marine Soft ClayCrusts: Implications For Hot-Oil PipelineDesign


10-8 Scour and Submarine Landslides (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Horst Brandes, University of Hawaii OMAE2011-50157 Stability of Temporary Submarine Slopes Technical

Publication OMAE2011-49635 Numerical Investigation of Scale Effects

in Modelling Scour below OffshorePipelines under Steady Currents


OMAE2011-49385 Design and Testing of Scour Protectionfor Adriatic LNG GBS


OMAE2011-50067 Experimental study of erosion thresholdof reconstituted sediments


SYMP 11 Jan Vugts Symposium on ‘Design Methodology of OffshoreStructures’ Expand All Sessions In Symposia Symposium Coordinator: René Huijsmans, Delft University of Technology Symposium Co-Coordinator: Jaap-Harm Westhuis, Sbm gusto 11-1 Design Methodology of Offshore Constructions (Technical Session) Session Schedule: Monday, June 20, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Paul Frieze, PAFA Consulting Engineers Session Co-Chair: Inge Lotsberg, DNV OMAE2011-50353 Jan Vugt's role in Offshore design Technical

PresentationOnly

OMAE2011-50253 Reliability and (re)Assessment of FixedSteel Structures


OMAE2011-49886 On the estimation of ocean engineeringdesign contours


OMAE2011-49169 On Structural Capacity of GroutedConnections in Offshore Structures


11-2 Structural Design of Offshore Constructions (Technical Session) Session Schedule: Monday, June 20, 2011 03:30 PM-05:30 PM Session Sponsors: Session Chair: Ove Gudmestad, University of Stavanger Session Co-Chair: René Huijsmans, Delft University of Technology OMAE2011-50233 VIBRATION ASSESSMENT

METHODOLOGY FOR SUBSEAPIPEWORK


OMAE2011-49874 Safety Format and Acceptance Criteriafor Analysis of Marine Structures Using




Non-Linear Methods OMAE2011-49462 Float-over Analysis for World's Largest

Float-over BargeTechnicalPublication

11-3 ISO standards in Offshore Design (Technical Session) Session Schedule: Tuesday, June 21, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: Paul Frieze, PAFA Consulting Engineers Session Co-Chair: René Huijsmans, Delft University of Technology OMAE2011-49160 ISO Standards for Structural Design Technical

Publication OMAE2011-49973 ISO 19902 Modelling and analysis

aspects including dynamicsTechnicalPublication

OMAE2011-50056 Jack-Up Site Assessment - the Voyageto an ISO


OMAE2011-50106 ISO 19902 Tubular members includingdamaged and grouted members


SYMP 12 Jo Pinkster Symposium on ’Second Order Wave Drift Forces onFloating Structures' Expand All Sessions In Symposia Symposium Coordinator: René Huijsmans, Delft University of Technology Symposium Co-Coordinator: Jaap-Harm Westhuis, Sbm gusto 12-1 Hydrodynamics in Dynamic Positioning (Technical Session) Session Schedule: Tuesday, June 21, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Hans Cozijn, MARIN Session Co-Chair: Jaap-Harm Westhuis, Sbm gusto OMAE2011-50354 The role of Jo Pinkster in Offshore

HydrodynamicsTechnicalPresentationOnly

OMAE2011-49388 Improved Dynamic Positioning usingWave Feed Forward


OMAE2011-49354 Dynamic Positioning – Early Design,Capability and Offsets, a Novel Approach


OMAE2011-50343 Time-Domain Simulation of Multi-bodyFloating Systems Based on State-spaceModeling Technology


12-2 Second order Wave Forces (Technical Session) Session Schedule: Tuesday, June 21, 2011 01:30 PM-03:00 PM Session Sponsors: Session Chair: Xiao-Bo Chen, bureau veritas Session Co-Chair: René Huijsmans, Delft University of Technology OMAE2011-50318 Experimental Investigation of the First

and Second Order Wave Exciting Forceson a Restrained Body in Long CrestedIrregular Waves


OMAE2011-50122 Un-resolved Enigmas from ShallowWater Model Tests


OMAE2011-50256 Computation of Added Wave Resistanceswith a Panel-Free Method


OMAE2011-50221 Experimental Study of Slow-Drift ShipMotions in Shallow-Water RandomWaves


12-3 Non Linear Wave Forces and Ship Motions (Technical Session) Session Schedule: Tuesday, June 21, 2011 03:30 PM-05:30 PM



Session Sponsors: Session Chair: Jeffrey Falzarano, Texas A&M University Session Co-Chair: René Huijsmans, Delft University of Technology OMAE2011-49925 A practical method to determine the

effect of current on wave loads andmotions of offshore structures


OMAE2011-50243 Effects of Shaping on Viscous Dampingand Motion of Heaving Cylinders


OMAE2011-50159 Towards the Navigational SafetyStandard in Close Proximity UnderwayLightering Maneuvers of a Two Ships


OMAE2011-49519 Viscous flow effects of passing ships inports


OMAE2011-50271 The Investigation of Non-linear Effectfor a Circular Cylinder Shaped FPSO


SYMP 13 Johan Wichers Symposium on 'Mooring of Floating Structures inWaves' Expand All Sessions In Symposia Symposium Coordinator: René Huijsmans, Delft University of Technology Symposium Co-Coordinator: Jaap-Harm Westhuis, Sbm gusto 13-1 Mooring Systems (Technical Session) Session Schedule: Wednesday, June 22, 2011 08:30 AM-10:00 AM Session Sponsors: Session Chair: joel witz, Hess Session Co-Chair: Wim de Boom, GustoMSC OMAE2011-50356 The role of Johan Wichers in Research

of Offshore Floating SystemsTechnicalPresentationOnly

OMAE2011-50140 DYNAMIC ANALYSIS OF MOORINGLINES FOR DEEP WATER FLOATINGSYSTEMS


OMAE2011-50298 Murphy Thunder Hawk: New Findings onPolyester and Chain Mooring Systems


OMAE2011-50104 On the Probability Distribution ofMooring Line Tensions in a DirectionalEnvironment


OMAE2011-49020 Time Domain Analysis of a Multi-component Mooring and Steel CatenaryRisers System in Ultra Deepwater


13-2 Low Frequency Motions Moored Vessels (Technical Session) Session Schedule: Wednesday, June 22, 2011 10:30 AM-12:00 PM Session Sponsors: Session Chair: Richard Leeuwenburgh, Bluewater Energy Services BV OMAE2011-49166 Wave drift forces affecting on

maneuverbility derivativesTechnicalPublication

OMAE2011-49283 A direct time domain simulation offloating structures with mooring lines


OMAE2011-49850 Decay of Vibrations along DeepwaterMooring Lines


OMAE2011-49615 Reliability Analysis of FPSO Broken Cablein Tandem Based on Weakest FailureModes Theory


13-3 FPSO Responses (Technical Session) Session Schedule: Wednesday, June 22, 2011 01:30 PM-03:00 PM Session Sponsors:



Session Chair: Takeshi Kinoshita, University of Tokyo OMAE2011-49855 Response of FPSO Systems to Squalls Technical

Publication OMAE2011-50108 FPSO Operations on Dynamic Positioning Technical

Publication OMAE2011-50351 Determination of Viscous Damping for

Low Frequency Motion of FloatingStructures


Note: Program is subject to change. Sponsored By

Co-Sponsored by

multiple international engineering societies and organizations

This site works best with: Internet Explorer 5.0+ • Netscape 7.0+ • Acrobat Reader 5.0+

Copyright © 1996-2011 ASME. All Rights Reserved. Terms of Use | Privacy Statement Powered by Conference Toolbox ™ version 4.0. For more information, contact us.

http://www.asme.org/

http://www.asme-ipti.org/

http://www.kiviniria.net/CM/PAG000002092/english.html

http://www.ooae.org/

http://www.asmeconferences.org/OMAE2011/CoSponsors.cfm

http://www.microsoft.com/downloads

http://www.netscape.com/download/index.html

http://www.adobe.com/products/acrobat/readstep2.html

http://www.asme.org/About-ASME/Terms-of-Use

http://www.asme.org/About-ASME/Privacy-and-Security-Statement


go to asme.org home > technical program...

Documents