go into saturn/p1x. steps in creating a dracula network from a saturn model
TRANSCRIPT
Go into SATURN/P1X
Steps in Creating a DRACULA Network from a SATURN Model
Cordon/Cut line
Save “Network .dat (for SATNET)” to file testcod.dat
Save “trip Matrix” to file testcod.ufm
Save the trip matrix with “Actual Flows”
Then follow the steps below:
- Quit P1X
- Run “SATNET testcod” and get output testcod.ufn
- Run “SATURN testcod testcod” and get testcod.ufs and testcod.ufc files
- Run “SATPIG testcod testcod” and get testcod.lpg file which contains the assigned routes and route flows
- Rename testcod.dat testcod.net
- Run DRACULA pre-processor program “DRACPREP”
- Run DRACULA microsimulation program “DRACSIM”
List of the files for the cordoned network
Run DRACPREP
Finished pre-processing of testcod network successfully
Run DRACSIM on the cordoned network testcod.net
Select an area to enlarge, using menu View/Box