globe sprinkler company
TRANSCRIPT
-
7/23/2019 Globe Sprinkler Company
1/20
-
7/23/2019 Globe Sprinkler Company
2/20
AUGUST 2007
FAX 989-846-9231989-846-45834077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
BULLETIN ACV, REV. #6C-1
DESCRIPTION AND OPERATION The Globe Model H-1, H-2 and H-3 Alarm Check Valves
are used in wet pipe fire sprinkler systems. They primarilyserve a dual purpose in that they prevent a reverse flow ofwater through their bodies (non-return) and also provide forthe use of a hydraulic fire alarm which is not dependentupon an electrical power supply for its operation. Throughthe use of a hydraulic retard chamber a time delay isprovided to eliminate potential false alarms caused byfluctuating water supply pressures. Where constant pres-sure water supplies are used the retard chamber (timedelay) is not necessary. By incorporating the use ofelectrical pressure switches, other supplemental alarms,annunciators etc. may also be used. A unique feature found on the Globe 3", 4" and 6" Alarm
Valves is the clapper being hinged to the handhole coverfor extreme ease of removal for inspection and service. Globe Model H-1, H-2 and H-3 Alarm Check Valvesmay be installed in both vertical and horizontal positionsand trim can be provided for both variable and constantwater supply pressures in either of these positions. The body of the Alarm Check Valve is constructed ofhigh tensile strength cast iron having considerable ductilityto reduce damage in field handling. All interior operating parts are machined from highlycorrosive-resistant alloys, each having high strength andgood wear resistance. Rubber parts are of selective materials which havegood abrasive resistance and long life expectancy interms of resiliency.
ALARM CHECK VALVE3" , 4" & 6" MODEL H-1
FLANGE/FLANGE3" & 4" MODEL H-2GROOVE/GROOVE
3" , 4" & 6" MODEL H-3FLANGE/GROOVE
Water Working Pressure Rating - 175 psi (12 bars)
(see below for more specific rating approvals).
4" Model "H-1" cULus Listed with D.I.N. Class 16
flanges has a pressure rating of 16 bars.
4" and 6" Model "H-1" LPCB Approved for a 16 bar
pressure rating with DIN Class 16 flanges.
Factory tested hydrostatically at twice the rated work-
ing pressure.
Equivalent feet of pipe: 3" Valve = 12.2 feet,
4" Valve = 9.7 feet, 6" Valve = 17 feet.
TECHNICAL DATA
APPROVALS
MODEL H-3
MODEL H-1
MODEL H-2
cULus Listed LPCB Approved - H1 & H3
FM Approved NYC - DOB MEA 325-91-M
3" 4" 6" 3" 4" 3" 4" 6"
Overall Length 9" 9" 10" 10" 10" 9" 9" 11"
34 lbs. 42 lbs. 69 lbs. 20 lbs. 22 lbs. 28 lbs. 37 lbs. 59 lb
81 lbs. 89 lbs. 114 lbs. 57 lbs. 69 lbs. 75 lbs. 84 lbs. 100 l
Weight of Vavle
Complete with
Verticle Variable
Pressure
Trimmings
PHYSICAL DATA
MODEL / SIZE
H-1 H-2 H-3
Printain Index
-
7/23/2019 Globe Sprinkler Company
3/20
FAX 989-846-9231
www.globesprinkler.com
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
BULLETIN ACV, REV. #6AUGUST 2007
GLOBEPRODUCTWARRANTY Globe agrees to repair or replace any of its own
manufactured products found to be defective in material
or workmanship for a period of one year from date of
shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
ORDERING INFORMATIONSPECIFY
Quantity Model Number Size
Factory Trimmed and Leak Tested Hydrostatically or
Loose Trim for Customer Installation.
Refer to Globe's Alarm Check Valve Installation and Maintenance Guide (Bulletin A.C.V.I.M.) for trim set-up, installation
instructions, and maintenance.
LEFT SIDE VIEW TOP VIEW
MODELH-1
CROSS SECTIONS
ITEM DESCRIPTION MAT'L 3" P/N 4" P/N 6" P/N ITEM DESCRIPTION MAT'L 3" P/N 4" P/N 6" P/N
1 Body - H-1 Cast Iron 323803 323502 323562 9 Clapper Facing Disc EPDM 323815 323511 323571
Body H-2 Cast Iron 323827 323552 ------ 10 Disc Retainer Stainless 323816 323512 323572
Body - H-3 Cast Iron 323807 323542 323592 11 Lock Nut Stainless 323514 323514 323514
2 Cover Bolt Steel 323408 323509 323569 12 Disc Retainer Bolt Stainless 323817 323513 323573
3 Seat Ring Bronze 323809 323504 323564 13 Sealing Washer Hard Fiber 323515 323515 323515
4 Cover Cast Iron 323805 323507 323567 14 Hinge Pin Bushing Bronze 323819 323518 323518
5 Clapper Stainless 323814 323510 323570 15 Name Plate Aluminum 323480 323480 323480
6 Retaining Ring Stainless 323527 323517 323517 16 Drive Screw Stainless 323520 323520 323520
7 Hinge Pin Stainless 323818 323516 323516 17 Torsion Spring Stainless 323528 323528 323565
8 Cover Gasket Vellumoid 323810 323508 323568 18 Spring Bushing Brass ------ ------ 323579
ALARM CHECK VALVE3" , 4" & 6" MODEL H-1FLANGE/FLANGE3" & 4" MODEL H-2GROOVE/GROOVE3" , 4" & 6" MODEL H-3
FLANGE/GROOVE
-
7/23/2019 Globe Sprinkler Company
4/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FEBRUARY 2005
FAX 989-846-9231989-846-4583
A-47 BULLETIN GL5613, REV. #7
TECHNICAL DATA
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
QUICK RESPONSE
CONCEALED
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
The Globe Quick Response GL5613 and GL8113 Extended Coverage Horizontal SidewallAdjustable Concealed Sprinkler for light hazard occupancies, have the lowest profile available for thistype of sprinkler, providing an aesthetically pleasing design. It provides sprinkler operation approxi-mately six times faster than ordinary sprinklers and can be installed wherever standard concealedspray sprinklers are specified when allowed by the applicable standards, and in accordance withNFPA 13. The sprinkler has 1/2 of adjustment for ease of installation. All that is seen on the wall isa 3 1/4 diameter wall plate color finished to match the specifiers exact requirements. In addition tomaking the sprinkler much less noticeable, the wall plate assembly also provides protection for thesprinkler from flying or hanging objects. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealedfrangible glass ampule that contains a precisely measured amount of fluid. The 3mm frangible glassampule provides sprinkler operation approximately six times faster than standard response sprin-klers, they can also be installed wherever standard extended coverage horizontal sidewall sprinklersare specified. The wall plate is soldered to the sprinklers special upper support assembly in threeplaces. Upon the application of sufficient heat, the plate falls to the floor exposing the quick responsesprinkler. At the rated temperature the internal pressure within the ampule exceeds the strength of theglass causing the glass to shatter. This results in water discharge which is distributed in an approvedpattern.
CLASSIFICATION AVAILABLE
SPRIN KLER TEMPERATURES
BULB
COLOR
N.F.P.A. MAXIMUM
CEILING TEMPERATURE
ORDINARY 135F / 155F 57C / 68C ORANGE / RED 100F 38C
INTERMEDIATE 175F 79C YELLOW 100F 38C
See reverse side for Approvals and Specifications.
Temperature Ratings -135F (57C) Sprinkler, 135F (57C) Cover Plate;
155F (68C) Sprinkler, 135F (57C) Cover Plate
175F (79C) Sprinkler, 155F (68C) Cover Plate.
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - copper Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Cover Plate - brassUpper Escutcheon Assembly - steel
QUICKRESPONSE
CONCEALED
EXTENDED COVERAGE
HORIZONTAL SIDEWALLFOR
L IGHT HAZARD OCCUPANCIES
-
7/23/2019 Globe Sprinkler Company
5/20
PRINTED U.S.A.FEBRUARY 2005
FAX 989-846-9231
www.globesprinkler.com
GLOBE FIRE SPRINKLER CORPORATION
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
BULLETIN GL5613, REV. #7
SPECIFICATIONS
QUICK RESPONSECONCEALED
EXTENDED COVERAGE HORIZONTAL SIDEWALLFOR
L IGHT HAZARD OCCUPANCIES
NOTE: METRIC CONVERSIONS ARE APPROXIMATE. *FINISHES AVAILABLE ON SPECIAL ORDER.
A PPROVALS
Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
GLOBEPRODUCT WARRANTY
ORDERING INFORMATIONSPECIFY
CROSS SECTIONQuantity Model Number Style
Orifice Temperature Finishes desired
Quantity - 5.6K Wrenches - P/N 329678
Quantity - 8.1K Wrenches - P/N 329679
Quantity - Protective Caps - P/N 327119
STYLESIN
MODELK
FACTOR
135F (57C)WITH PLATE
135F (57C)
155F (68C)WITH PLATE
135F (57C)
175F (79C)WITH PLATE
155F (68C)cULus
NYC - DOBMEA 101-92-E
CONCEALEDSIDEWALL
GL5613 5.6 X X X X X
GL8113 8.1 X X X X X
NOMINAL "K" FACTOR THREAD SIZE FINISHES
5.6
8.1
(80 metric)
(116 metric)
1/2" NPT
3/4" NPT
Bright ChromeWhite Painted*Satin Chrome
*Bright Brass*Other Painted Surfaces
U.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS
MODELNO.
K-Factor TEMP.CEILING TODEFLECTORDISTANCE
WIDTH OFCOVERAGE
LENGTH OFCOVERAGE
MIN. PRESSUREP.S.I.
FLOW ING.P.M.
GL5613 5.6135F / 57C155F / 68C175F / 79C
4" TO 6"
16' 16' 26.8 29
16' 18' 26.8 29
16' * 20' 32.7 32
6" TO 12"
16' 16' 32.7 32
16' 18' 32.7 32
16' * 20' 32.7 32
GL8113 8.1
135F / 57C155F / 68C175F / 79C
4" TO 12" 16' 16' 10.3 26
4" TO 6" 16' 18' 12.8 29
6" TO 12" 16' 18' 15.6 32
135F / 57C175F / 79C
4" TO 6" 16' * 20' 15.6 32
6" TO 12" 16' * 20' 20.9 37
* 155F NOT LISTED IN 16' x 20' ROOM SIZE, USE EITHER 135F OR 175F.
7' MINIMUM SPACING FOR GL5613 AND 6' MINIMUM SPACING FOR GL8113.
-
7/23/2019 Globe Sprinkler Company
6/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
JANUARY 2009
(989) 846-4583 FAX 989-846-9231
A-38-EQ BULLETIN GL5606-EQ REV#
QUICK RESPONSE
WHITE
ADJUSTABLE
CONCEALED PENDENT
The Globe Quick Response GL5606 Adjustable Concealed Pendent Sprinkler has a low profile,aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinarysprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowedby the applicable standards. It offers the additional feature of greatly increased safety to life and should beused advisedly and under the direction of approving authorities having jurisdiction. The sprinkler is availablewith a nominal 1" of adjustment and a low profile cover plate assembly. The 4 1/2" diameter cover plateallows for 1" clearance around the sprinkler body.The GL Series Concealed Sprinkler may be virtuallyinvisible as it does not interrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mmfrangible glass ampule which is located above the ceiling and concealed from view by the ceiling plate.
The provided protective cap needs to be removed in order to install the sprinkler with the proper wrench.The protective cap must be replaced on the sprinkler until the time the cover plate is to be installed. The "pushon - screw off" designed cover plate is easily installed and with a nominal 1" inch of adjustment makes iteasier to get a proper fit at the ceiling. Operation of the sprinkler occurs when heat build up causes the solder holding the cover plate to thesupport shell to melt allowing the cover plate to fall clear. Continued heat build up causes the 3mm glassbulb to burst allowing the deflector to drop down and distribute water in an approved pattern to extinguishor control the fire.
DESCRIPTION AND OPERATION
TECHNICAL DATA
SPRINKLER TEMPERATURE RATING/CLA SSIFICATION and COLOR CODING
CLASSIFICATIONAVAILABLE
SPRINKLER TEMPERATURES
BULB
COLOR
N.F.P.A. MAXIMUM CEILING
TEMPERATURE
ORDINARY 135F/155F 57C/68C ORANGE/RED 100F 38C
INTERMEDIATE 175F/200F 79C/93C YELLOW/GREEN 150F 66C
See reverse side for Approvals and Specifications.
Temperature Ratings -
135F (57C) Sprinkler, 135F (57C) Cover Plate;
155F (68C) Sprinkler, 135F (57C) Cover Plate;155F (68C) Sprinkler, 155F (68C) Cover Plate;
175F (79C) Sprinkler, 155F (68C) Cover Plate;
200F (93C) Sprinkler, 155F (68C) Cover Plate.
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - brass Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Drop Pin - stainless steel
Cover Plate - brassUpper Escutcheon Assembly - plated steel.
NOTE: Globe's wrench P/N 332765 mus t be used to instal l this s prink ler.
4 1/2" diameter plate
" THE INCH"
QUICK RESPONSE
AUTOMATIC SPRINKLERS
MODEL GL5606 ONE INCH
ADJUSTAB LE CONCEALED PENDENT
WITH COVER PLATE TO MEET IBC CODEFOR SEISMIC AREAS C, D & E
-
7/23/2019 Globe Sprinkler Company
7/20
FAX 989-846-9231
www.globesprinkler.com
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
JANUARY 2009 BULLETIN GL5606-EQ REV#
QUICKRESPONSE
AUTOMATIC SPRINKLERS
MODELGL5606
ADJUSTABLE CONCEALEDPENDENT
WITHCOVERPLATETOMEETIBC CODE
FOR
SEISMIC
AREAS
C, D & ESPECIFICATIONS
APPROVALS
SPECIFYQuantity Model Number Style
Orifice Thread Sizes Temperature
Finishes desired
Quantity - Adjustable Concealed Wrenches -
P/N 332765
ORDERINGINFORMATION
Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
GLOBEPRODUCTWARRANTY
CROSS SECTION
THREAD SIZE LENGTH FINISHES
Bright Chrome
White Painted
Bright Brass1
Satin Chrome
Other Painted Finishes1
NOTE: Metric conversions are approximate. 1Finishes available on special order.
1/2" NPT 2 1/2" (6.4 cm)5.6
NOMINAL "K" FACTOR
(80 metric)
STYLESIN
MODEL
K
FACTOR
135F (57C)with plate
135F (57C)
155F (68C)with plate
135F (57C)
155F (68C)with plate
155F (68C)
175F (79C)with plate
155F (68C)
200F (93C)with plate
155F (68C)
cULus
Adjustable
Concealed
Pendent
GL5606 5.6 X X X X X X
F531ETIHW
#TRAP
F551ETIHW
#TRAP
F531EMORHC
#TRAP
F551EMORHC
#TRAP
GNILIEC.NIM
.AIDELOH
228233 828233 128233 728233 "4-"8/73
-
7/23/2019 Globe Sprinkler Company
8/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
DECEMBER 2006
(989) 846-4583 FAX 989-846-9231
A-32 BULLETIN GL2804, REV. #5
QUICKRESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
CONCEALED PENDENT
QUICK RESPONSE
WHITE
CONCEALED PENDENT
The Globe Quick Response GL Series Concealed Pendent Sprinkler is a low profile, aestheti-cally pleasing design. It provides sprinkler operation approximately six times faster than ordinarysprinklers and can be installed wherever standard concealed spray sprinklers are specified whenallowed by the applicable standards. It offers the additional feature of greatly increased safety tolife and should be used advisedly and under the direction of approving authorities having
jurisdiction. The Sprinkler is available with 1/8" adjustment and a low profile cover plate assembly.All that is seen at the ceiling is a 3 5/16" diameter ceiling plate color finished to match the specifier'sexact requirements. The GL Series Concealed Sprinkler may be virtually invisible as it does notinterrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangibleglass ampule type sprinkler which is located above the ceiling and concealed from view by theceiling plate. The ceiling plate is soldered to the sprinkler's special upper support assembly in three
places. Upon the application of sufficient heat, the plate falls to the floor exposing the quickresponse pendent spray sprinkler. At the ampule's rated temperature, the sprinkler opensdischarging water onto the floor in its required and approved distribution pattern. A special spring is attached to the pendent sprinkler deflector that serves to provide a constanttension against the ceiling plate. This feature virtually ensures freedom from environmentalvibration problems.
DESCRIPTION AND OPERATION
TECHNICAL DATASee reverse side for Approvals and Specifications.
Temperature Ratings -
135F (57C) Sprinkler, 135F (57C) Cover Plate;
155F (68C) Sprinkler, 135F (57C) Cover Plate175F (79C) Sprinkler, 155F (68C) Cover Plate;
200F (93C) Sprinkler, 155F (68C) Cover Plate.
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - copper Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Cover Plate - brass
Upper Escutcheon Assembly - steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
CLASSIFICATIONAVAILABLE
SPRINKLER TEMPERATURES
BULB
COLOR
N.F.P.A. MAXIMUM CEILING
TEMPERATURE
ORDINARY 135F/155F 57C/68C ORANGE/RED 100F 38C
INTERMEDIATE 175F/200F 79C/93C YELLOW/GREEN 150F 66C
-
7/23/2019 Globe Sprinkler Company
9/20
FAX 989-846-9231
www.globesprinkler.com
PRINTED U.S.A.
989-846-4583
1-800-248-0278
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
DECEMBER 2006 BULLETIN GL2804, REV. #5
QUICKRESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
CONCEALED PENDENT
SPECIFICATIONS
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
A PPROVALS
* FINISHES AVAILABLE ON SPECIAL ORDER.
PAINTED PLATES OTHER THAN WHITE REQUIRE
CUSTOMER TO FURNISH PAINT.
ORDERING INFORMATIONSPECIFY
Quantity Model Number Style
Orifice Thread Sizes Temperature
Finishes desired
Quantity - Concealed Wrenches - P/N 325391
Quantity - Protective Caps - P/N 327119
GLOBEPRODUCT WARRANTY
Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
*LISTED FOR ALL HAZARDS.
STYLESIN
MODEL
K
FACTOR
135F (57C)
WITH PLATE
135F (57C)
155F (68C)
WITH PLATE
135F (57C)
175F (79C)
WITH PLATE
155F (68C)
200F (93C)
WITH PLATE
155F (68C)
cULus LPC CE
CONCEALED
PENDENT
GL2804 2.8 X X X X X --- ---
GL4204 4.2 X X X X X --- ---
GL5604 5.6* X X X X X X X
NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES
2.8 (39 metric) 1/2" NPT
2 1/2" (6.4 cm)
Bright Chrome
White Painted
Satin Chrome1
Bright Brass1
Other Painted Finishes1
4.2 (59 metric) 1/2" NPT
5.6 (80 metric) 1/2" NPT
CROSS SECTION
1/8" ADJUSTMENT
-
7/23/2019 Globe Sprinkler Company
10/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 989-846-4583
A-55APRIL 2007 BULLETIN GL5635, REV.#11
FAX 989-846-9231
QUICKRESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
DRY TYPE
The Globe Quick Response GL Series Dry Type Pendent Sprinkler is
designed for use in special applications such as freezing environments and
conditions where sediment or foreign materials might accumulate in ordinary
drop nipples.
The Globe Quick Response GL Series Dry Type Pendent Sprinkler utilizes
a 3mm frangible glass ampule as the thermosensitive element. This provides
sprinkler operation approximately six times faster than ordinary sprinklers. At
the ampule's rated temperature, the sprinkler opens releasing the bulb seat,
causing the inner tube assembly to move, allowing the spring assembly to pivot
alongside the inner tube. At this time, water flows through the sprinkler and is
distributed by the deflector in an approved discharge pattern. It can be installed
wherever standard spray sprinklers are specified but offers the additionalfeature of greatly increased safety to life. Quick Response Sprinklers should
be used advisedly and under the direction of approving authorities having
jurisdiction.
The heart of Globe's Model GL Series sprinkler proven actuating assembly
is a hermetically sealed frangible glass ampule that contains a precisely
measured amount of fluid. When heat is absorbed, the liquid within the bulb
expands increasing the internal pressure. At the prescribed temperature the
internal pressure within the ampule exceeds the strength of the glass causing
the glass to shatter. This results in water discharge which is distributed in an
approved pattern.
DESCRIPTION AND OPERATION
RECESSEDEXTENDED
TECHNICAL DATASee reverse side for Approvals and Specifications.Temperature Ratings - 135F (57C), 155F (68C), 175F (79C)
200F (93C), 286F (141C).
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - brass Spring - teflon coated nickel alloy
Retainer - brass Pin - stainless steel Torsion spring - stainless steel
Bulb - glass with alcohol based solution, 3mm Orifice insert - brass
3/4" NPT or 1" NPT Outer tube - galvanized steel pipe
Inner tube - stainless steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR
N.F.P.A. MAXIMUM
CEILING TEMPERATURE
ORDINARY 135F/155F 57C/68C ORANGE/RED 100F 38C
INTERMEDIATE 175F/200F 79C/93C YELLOW/GREEN 150F 66C
HIGH 286F 141C BLUE 225F 107C
SURFACE
MOUNT
SLEEVE
& SKIRT
-
7/23/2019 Globe Sprinkler Company
11/20
FAX 989-846-9231
www.globesprinkler.com
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658989-846-4583
1-800-248-0278
APRIL 2007 BULLETIN GL5635, REV. #1
QUICKRESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
DRY TYPE
Globe agrees to repair or replace any of its own manufac-
tured products found to be defective in material or workman-
ship for a period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
GLOBEPRODUCT WARRANTY
CROSS SECTIONS
Globe GL Series Dry Pendent sprinklers should be installed
in accordance with the requirements set forth in NFPA 13.
These sprinklers are to be installed using a pipe wrench applied
to the outer tube. When this is not possible, the proper sprinkler
head wrench may be used with extreme care for lengths up
to approximately 18". Excessive force may distort the frame
thus destroying the unit.
For further important installation data, please refer to ourDry Sprinkler Caution Sheet.
IMPORTANT INSTAL LATION DATA
A PPROVALS
PENDENTEXTENDED PENDENT
SLEEVE & SKIRT PENDENTRECESSED PENDENT
SPECIFICATIONS
GL5635 5.6 1" NPT X X X X X X X
GL5636 5.6 3/4" NPT X X X X - X X
GL8135 8.1 1" NPT X X X X - X X
GL5635 5.6 1" NPT X X X X X X X
GL5636 5.6 3/4" NPT X X X X - X X
GL8135 8.1 1" NPT X X X X - X X
NOTE:
Listed for ALL hazards
* Pendent style - FM Approved 155F, 200F, and 286F
* Recessed Pendent style - FM Approved 155F and 200F
K FACTOR THREAD SIZE cULusNYC-DOB
MEA 101-92-E
PENDENT
RECESSED
PENDENT
* FM135F
57C
155F
68C
200F
93C
286F
141CSTYLE SIN MODEL
Quantity Model Number Style Orifice
Temperature Finishes desired
Quantity - Wrenches - P/N 333010
Quantity - Recessed Wrenches - P/N 337014
Quantity - Protective Caps - P/N 327109-CAP (Friction Fit
Recessed)
Escutcheons desired
"A" Dimension - Distance from face of fitting to the finished
ceiling line regardless of escutcheon used.
ORDERING INFORMATIONSPECIFY
THREAD SIZE LENGTH FINISHES
NOTE:1Finishes available on special orde
Metric conversions are approximate. 2Lead Coated is UL approved only
cULus listed corrosion resistant: Polyester must be specified on order.
NOMINAL "K" FACTOR
(80 metric)
(116 metric)
Factory Bronze
Satin Chrome1Bright Chrome
White Polyester
Black Polyester
Lead Coated28.1 1" NPT
FM Variable to
36"
5.6 3/4" or 1" NPT
cULus Variable
to 48"
-
7/23/2019 Globe Sprinkler Company
12/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
MAY 2004
FAX 989-846-9231989-846-4583
A-44 BULLETIN GL5628, REV. #4
QUICKRESPONSE
EXTENDED COVERAGE
AUTOMATIC SPRINKLERS
MODEL GL5628
HORIZONTAL SIDEWALL
TECHNICAL DATASee reverse side for Approvals and Specifications.
Temperature Rating - 135F (57C), 155F (68C), 175F (79C)
200F (79C).
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - copper Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Escutcheon Assembly - steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
QUICK RESPONSE
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
QUICK RESPONSE
RECESSED
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
The Globe Quick Response Model GL5628 ExtendedCoverage Horizontal Sidewall Sprinkler is a low profile yetdurable design which utilizes a 3mm frangible glass am-pule as the thermosensitive element. This provides sprin-kler operation approximately six times faster than ordinarysprinklers. While these Quick Response Sprinklers pro-vide an aesthetically pleasing appearance, they can beinstalled wherever standard extended coverage horizon-tal sprinklers are specified; but offer the additional featureof greatly increased safety to life. Quick Response Sprin-klers should be used advisedly and under the direction of
approving authorities having jurisdiction, in accordancewith their listings and in accordance with NFPA 13. The heart of Globe's Model GL Series sprinkler provenactuating assembly is a hermetically sealed frangibleglass ampule that contains a precisely measured amountof fluid. When heat is absorbed, the liquid within the bulbexpands increasing the internal pressure. At the pre-scribed temperature the internal pressure within the am-pule exceeds the strength of the glass causing the glass toshatter. This results in water discharge which is distributedin an approved pattern.
CLASSIFICATION AVAILABLE
SPRINKLER TEMPERATURES
BULB
COLOR
N.F.P.A. MAXIMUM CEILING
TEMPERATURE
ORDINARY
INTERMEDIATE
135F/155F
175F/200F
57C/68C
79C/93C
ORANGE/RED
YELLOW/GREEN
100F
150F
38C
66C
-
7/23/2019 Globe Sprinkler Company
13/20
PRINTED U.S.A.MAY 2004
FAX 989-846-9231
www.globesprinkler.com
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
BULLETIN GL5628, REV. #4
SPECIFICATIONS
QUICK RESPONSE
EXTENDED COVERAGE
AUTOMATIC SPRINKLERS
MODEL GL5628
HORIZONTAL SIDEWALL
NOTE: METRIC CONVERSIONS ARE APPROXIMATE. *FINISHES AVAILABLE ON SPECIAL ORDER.
+AVAILABLE AS U.L. AND C-U.L. LISTED CORROSION
RESISTANT WHEN SPECIFIED ON ORDER.
A PPROVALS
Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
GLOBEPRODUCT WARRANTY
ORDERING INFORMATIONSPECIFYCROSS SECTIONSQuantity Model Number Style
Orifice Temperature Finishes desired
Quantity - Standard Wrenches - P/N 325390
Quantity - Recessed Wrenches - P/N 325391
Quantity - Protective Caps - P/N 327109-CAP
(Friction Fit Recessed)
STYLESIN
MODELK-FACTOR
135F
57C
155F
68C
175F
79C
200F
93CcULus
NYC-DOB
MEA 101-92-E
SIDEWALL GL5628 5.6 X X X X X X
N OMI NAL K FA CT OR T HREA D SI ZE L E N GT H FI NI S HES
5.6 (80 metric ) 1/2" NPT 2 1/2" (7.6 c m )
Factory Bronze* Satin Chro me
Bright Chro me
Whit e Polyester+
Bl ack Polyester+
*Lead Coated
U.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS
MODEL
NO.STYLE TEMP.
CEILING TO
DEFLECTOR
DISTANCE
W IDTH OF
COVERAGE
LENGTH OF
COVERAGE
MIN. PRESSURE
P.S.I .
FLOW IN
G.P.M.
GL5628
Standard
&
Recessed
135F / 57C
155F / 68C
175F / 79C
4" TO 12"
16' 16' 21.6 26
16' 18' 26.8 29
18' 18' 32.7 32
Standard
&
Recessed
200F / 93C 4" TO 6"
16' 16' 21.6 26
16' 18' 26.8 29
18' 18' 32.7 32Standard
&
Recessed
135F / 57C 4" TO 12" 16' 20' 32.7 32
Standard 175F / 79C 4" TO 12" 16' 20' 32.7 32
MINIMUM 7' SPRINKLER SPACING.
3/4" ADJUSTMENT 1/2" ADJUSTMENT
-
7/23/2019 Globe Sprinkler Company
14/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
OCTOBER 2003
FAX 989-846-9231989-846-4583
A-46 BULLETIN GL8128, REV. #5
QUICKRESPONSE
EXTENDED COVERAGE
AUTOMATIC SPRINKLERS
MODELS GL8128, GL8129
HORIZONTAL SIDEWALL
TECHNICAL DATA
See reverse side for Approvals and Specifications.
Temperature Rating - 135F (57C), 155F (68C), 175F (79C)
200F (93C).
Water Working Pressure Rating - 175 psi (1207 kPa).
Factory tested hydrostatically to 500 psi (3448 kPa).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - copper Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Escutcheon Assembly - steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
QUICK RESPONSE
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
QUICK RESPONSE
RECESSED
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
The Globe Quick Response Models GL8128 andGL8129 Extended Coverage Horizontal Sidewall Sprin-klers are a low profile yet durable design which utilizes a3mm frangible glass ampule as the thermosensitive ele-ment. This provides sprinkler operation approximately sixtimes faster than ordinary sprinklers. While this QuickResponse Sprinkler provides an aesthetically pleasingappearance, it can be installed wherever standard ex-tended coverage horizontal sprinklers are specified; butoffers the additional feature of greatly increased safety tolife. Quick Response Sprinklers should be used advisedlyand under the direction of approving authorities having
jurisdiction, in accordance with their listings and in accor-dance with NFPA 13. The heart of Globe's Model GL Series sprinkler provenactuating assembly is a hermetically sealed frangibleglass ampule that contains a precisely measured amountof fluid. When heat is absorbed, the liquid within the bulbexpands increasing the internal pressure. At the pre-scribed temperature the internal pressure within the am-pule exceeds the strength of the glass causing the glass toshatter. This results in water discharge which is distributedin an approved pattern depending upon the deflector styleused.
CLASSIFICATION AVAILABLE
SPRIN KLER TEMPERATURES
BULB
COLOR
N.F.P.A. MAX IMU M
CEILING TEMPERATURE
ORDINARY 135F/155F 57C/68C ORANGE/RED 100F 38C
INTERMEDIATE 175F/200F 79C/93C YELLOW/GREEN 150F 66C
-
7/23/2019 Globe Sprinkler Company
15/20
FAX 989-846-9231
www.globesprinkler.com
OCTOBER 2003 PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
BULLETIN GL8128, REV. #5
QUICKRESPONSE
EXTENDED COVERAGE
AUTOMATIC SPRINKLERS
MODELS GL8128, GL8129
HORIZONTAL SIDEWALL
CROSS SECTIONS
ORDERING INFORMATIONSPECIFY
GLOBEPRODUCT WARRANTY Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
APPROVALS*FINISHES AVAILABLE ON SPECIAL ORDER.+AVAILABLE AS cULus LISTED CORROSION
RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
Quantity Model Number Style
Orifice Temperature Finishes desired
Quantity - Wrenches - P/N 312366
Quantity - Recessed Wrenches - P/N 325401, Rev. DQuantity - Protective Caps - P/N 327109-CAP (Friction
Fit Recessed)
N O MIN AL "K" FACTO R T HREAD SIZE LEN GT H FIN ISH ES
8.1 (116 metric) 3/4" NPT 3" (7.6 cm)
Factor y Bronze
*Satin Chrome
Bright Chrome
W hite Polyester+
Black Polyester+
*Lead Coated
STYLEMODEL
NO.K FACTOR
135F
57C
155F
68C
175F
79C
200F
93CcULus
NYC - DOB
MEA 101-92-E
SIDEWALL GL8128 8.1 X X X X X XGL8129 8.1 X X X X X X
U.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS
MODEL
NO.STYLE TEMP.
CEILING TO
DEFLECTOR
DISTANCE
W IDTH OF
COVERAGE
LENGTH OF
COVERAGE
MIN. PRESSURE
P.S.I .
FLOW IN
G.P.M.
GL8128
Standard
&
Recessed
135F / 57C
155F / 68C
175F / 79C
200F / 93C
4" TO 6" 16'
16' 10.3 26
18' 12.8 29
GL8129
Standard
&
Recessed
135F / 57C
155F / 68C
175F / 79C
6" TO 12" 16'16' 10.3 26
18' 12.8 29
GL8128
GL8129
Standard&
Recessed
135F / 57C4" TO 6"
6" TO 12"16' 20' 16.6 33
GL8128
GL8129Standard 175F / 79C
4" TO 6"
6" TO 12"
GL8128
GL8129
Standard
&
Recessed
135F / 57C4" TO 6"
6" TO 12"16'
*22' 20.8 37
*24' 26.8 42
*LISTED WITH RECESSED CUP WITH 1/2" ADJUSTMENT, MINIMUM 6' SPRINKLER SPACING.
-
7/23/2019 Globe Sprinkler Company
16/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 FAX 989-846-9231989-846-4583
A-24DECEMBER 2006 BULLETIN GL2801, REV. #5
QUICKRESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
RECESSED PENDENT
RECESSED HORIZONTAL SIDEWAL
TECHNICAL DATA
The Globe Quick Response GL Series Sprinkler is a low profileyet durable design which utilizes a 3mm frangible glass ampule as
the thermosensitive element. This provides sprinkler operation
approximately six times faster than ordinary sprinklers. While the
Quick Response Sprinkler provides an aesthetically pleasing ap-
pearance, it can be installed wherever standard spray sprinklers
are specified but offers the additional feature of greatly increased
safety to life. Quick Response Sprinklers should be used advisedly
and under the direction of approving authorities having jurisdiction.
The heart of Globes GL Series sprinkler proven actuating
assembly is a hermetically sealed frangible glass ampule that
contains a precisely measured amount of fluid. When heat is
absorbed, the liquid within the bulb expands increasing the internal
pressure. At the prescribed temperature the internal pressure
within the ampule exceeds the strength of the glass causing the
glass to shatter. This results in water discharge which is distributed
in an approved pattern depending upon the deflector style used.
The sprinkler and escutcheon are not factory assembled.
Assembly is done in the field.
DESCRIPTION AND OPERATION
See reverse side for Approvals and Specifications.
Temperature Ratings - 135F (57C), 155F (68C), 175F
(79C), 200F (93C), 286F (141C).
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - copper Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
Escutcheon Assembly - steel
QUICK RESPONSERECESSED PENDENT
QUICK RESPONSE
RECESSED
HORIZONTAL SIDEWALL
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES
BULB
COLOR
N.F.P.A. MAXIMUM
CEILING TEMPERATURE
ORDINARY 135F/155F 57C/68C ORANGE/RED 100F 38C
INTERMEDIATE 175F/200F 79C/93C YELLOW/GREEN 150F 66C
HIGH 286F 141C BLUE 225F 107C
-
7/23/2019 Globe Sprinkler Company
17/20
FAX 989-846-9231
www.globesprinkler.com
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
DECEMBER 2006 BULLETIN GL2801, REV. #5
QUICKRESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
RECESSED PENDENTRECESSED HORIZONTAL SIDEWALL
SPECIFICATIONS
PENDENT
CROSS SECTIONS
HORIZONTAL
SIDEWALL
1HORIZONTAL SIDEWALL IS 2 9/16".2 FINISHES AVAILABLE ON SPECIAL ORDER.3C-UL LISTED CORROSION RESISTANT -
POLYESTER MUST BE SPECIFIED ON ORDER.
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
GLOBEPRODUCT WARRANTY
Globe agrees to repair or replace any of its own
manufactured products found to be defective in material
or workmanship for a period of one year from date of
shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
ORDERING INFORMATIONSPECIFY
HORIZONTAL SIDEWALL cULus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING.
5.6K ORIFICE, 7.8K ORIFICE AND 8.1K ORIFICE LISTED FOR ALL HAZARDS.
* 7.8K X 1/2" NPT.
**286F cULus LISTED ONLY.
1/2" RECESSED ESCUTCHEONS ARE REQUIRED FOR FM APPROVED SPRINKLERS.
APPROVALS
Quantity Model Number Style
Orifice Thread Sizes Temperature
Finishes desired
Quantity - Recessed Wrenches - P/N 325391 (1/2");
P/N 325401, Rev. F (L.O.)
Quantity - Protective Caps - P/N 327109-CAP
(Friction Fit Recessed)
NOMINAL "K" FACTOR THREAD SIZE LENGTH 1 FINISHES
2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze
Satin Chrome 2
Bright Chrome
White Polyester 3
Black Polyester 3
Lead Coated 2
4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm)
5.6 (80 metric) 1/2" NPT 2 1/4" (5.7 cm)
7.8 (111 metric) 1/2" NPT 2 1/4" (5.7 cm)
8.1 (116 metric) 3/4" NPT 2 7/16" (6.2 cm)
STYLE SIN
MODEL
K
FACTOR
135F
57C
155F
68C
175F
79C
200F
93C
**286F
141C cULus FM LPC CE
NYC - DOB
MEA 101-92-E
PENDENT
RECESSED
GL2801 2.8 X X X X X X --- --- --- X
GL4201 4.2 X X X X X X --- --- --- X
GL5601 5.6 X X X X X X X X X X
GL8101 7.8* X X X X X X X --- --- X
GL8106 8.1 X X X X X X X X X X
HORIZONTAL
SIDEWALL
RECESSED
GL2826 2.8 X X X X X X --- --- --- X
GL4226 4.2 X X X X X X --- --- --- X
GL5626 5.6 X X X X X X --- --- --- X
GL8127 8.1 X X X X X X --- --- --- ---
-
7/23/2019 Globe Sprinkler Company
18/20
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658 FAX 989-846-9231989-846-4583
DECEMBER 2006 A-20 BULLETIN GL5615, REV. #6
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
QUICK RESPONSE
AUTOMATIC SPRINKLERS
GL SERIES
UPRIGHT PENDENT
VERTICAL SIDEWALL
HORIZONTAL SIDEWALL
CONVENTIONAL (OLD STYLE)
HORIZONTAL SIDEWALL
UPRIGHT CONVENTIONAL
QUICK RESPONSE
QUICK RESPONSE
PENDENT VERTICAL
SIDEWALL
QUICK RESPONSE
DESCRIPTION AND OPERATION The Globe Quick Response GL Series Sprinklers are a low profileyet durable design which utilizes a 3mm frangible glass ampule as the
thermosensitive element. This provides sprinkler operation approxi-
mately six times faster than ordinary sprinklers. While the Quick
Response Sprinkler provides an aesthetically pleasing appearance, it
can be installed wherever standard spray sprinklers are specified when
allowed by the applicable standards. It offers the additional feature of
greatly increased safety to life and is available in various styles, orifices,
temperature ratings and finishes to meet many varying design require-
ments. Quick Response Sprinklers should be used advisedly and underthe direction of approving authorities having jurisdiction.
The heart of Globe's GL Series sprinkler proven actuating
assembly is a hermetically sealed frangible glass ampule that contains
a precisely measured amount of fluid. When heat is absorbed, the liquid
within the bulb expands increasing the internal pressure. At the
prescribed temperature the internal pressure within the ampule exceeds
the strength of the glass causing the glass to shatter. This results in
water discharge which is distributed in an approved pattern depending
upon the deflector style used.
The sprinkler and escutcheon are not factory assembled. As-
sembly is done in the field.
See reverse side for Approvals and Specifications.
Temperature Ratings - 135F (57C), 155F (68C), 175F (79C),
200F (93C), 286F (141C).
Water Working Pressure Rating - 175 psi (12 Bars).
Factory tested hydrostatically to 500 psi (34 Bars).
Maximum low temperature glass bulb rating is -67F (-55C).
Frame - bronze Deflector - brass Screw - brass
Bulb seat - copper Spring - nickel alloy Seal - teflon
Bulb - glass with alcohol based solution, 3mm size.
TECHNICAL DATA
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES
BULB
COLOR
N.F.P.A. MAXIMUM
CEILING TEMPERATURE
ORDINARY 135F/155F 57C/68C ORANGE/RED 100F 38C
INTERMEDIATE 175F/200F 79C/93C YELLOW/GREEN 150F 66C
HIGH 286F 141C BLUE 225F 107C
-
7/23/2019 Globe Sprinkler Company
19/20
FAX 989-846-9231
www.globesprinkler.com
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
989-846-4583
1-800-248-0278
DECEMBER 2006 BULLETIN GL5615, REV. #6
QUICKRESPONSEAUTOMATIC SPRINKLERSGL SERIESUPRIGHT PENDENT VERTICAL SIDEWALLHORIZONTALSIDEWALL CONVENTIONAL(OLDSTYLE)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 1HORIZONTAL SIDEWALL IS 2 9/16".2FINISHES AVAILABLE ON SPECIAL ORDER.3AVAILABLE AS cULus LISTED CORROSION
RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS
APPROVALS
HORIZONTAL SIDEWALL cULus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING, FM APPROVED 4" TO 6".
VERTICAL SIDEWALL SPRINKLER cULus LISTED FOR LIGHT HAZARD ONLY.
PENDENT VERTICAL SIDEWALL cULus LISTED FOR 6' MIN. SPACING.
UPRIGHT VERTICAL SIDEWALL cULus LISTED FOR 9' MIN. SPACING.
*1/2" NPT.
SPECIFY
ORDERINGINFORMATION
Globe agrees to repair or replace any of its own
manufactured products found to be defective in mate-
rial or workmanship for a period of one year from date
of shipment.
For specific details of our warranty please refer to
Price List Terms and Conditions of Sale (Our Price List).
GLOBEPRODUCT WARRANTY
NOMINAL "K" FACTOR THREAD SIZE LENGTH 1 FINISHES
2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze
Satin Chrome 2
Bright Chrome
White Polyester 3
Black Polyester 3
Lead Coated 2
4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm)
5.6 (80 metric) 1/2" NPT 2 1/4" (5.7 cm)
7.8 (111 metric) 1/2" NPT 2 1/4" (5.7 cm)
8.1 (116 metric) 3/4" NPT 2 7/16" (6.2 cm)
STYLE SIN
MODEL
K
FACTOR
135F
57C
155F
68C
175F
79C
200F
93C
286F
141C cULus F.M. LPC CE
NYC - DOB
MEA 101-92-E
UPRIGHT
GL2815 2.8 X X X X X X --- --- --- X
GL4215 4.2 X X X X X X --- --- --- X
GL5615 5.6 X X X X X X X X X X
GL8115 7.8* X X X X X X X --- --- X
GL8118 8.1 X X X X X X X X X X
PENDENT
GL2801 2.8 X X X X X X --- --- --- X
GL4201 4.2 X X X X X X --- --- --- X
GL5601 5.6 X X X X X X X X X X
GL8101 7.8* X X X X X X X --- --- X
GL8106 8.1 X X X X X X X X X X
VERTICALSIDEWALL
GL5632 5.6 X X X X X X X --- --- ---
GL8133 8.1 X X X X X X --- --- --- ---
HORIZONTAL
SIDEWALL
GL2826 2.8 X X X X X X --- --- --- X
GL4226 4.2 X X X X X X --- --- --- X
GL5626 5.6 X X X X X X X --- --- X
GL8127 8.1 X X X X X X --- --- --- ---
CONVENTIONAL
(OLD STYLE)
GL5624 5.6 X X X X X --- --- X X ---
GL8125 8.1 X X X X X --- --- X X ---
Quantity Model Number Style
Orifice Thread Sizes Temperature
Finishes desired
Quantity - Wrenches - P/N 325390 (1/2");
P/N 312366 (L.O.)
-
7/23/2019 Globe Sprinkler Company
20/20
FAX 989-846-9231
www.globesprinkler.com
989-846-4583
1-800-248-0278
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
SPRINKLER CABINETS
FOR
REPLACEMENT
AUTOMATIC SPRINKLERS
When storing concealed sprinklers, Twelve Sprinkler Cabinet holds six units and Six Sprinkler
Cabinet holds three units.
TWELVE SPRINKLER CABINET
FOR " OR " SPRINKLERS
P/N 312392
SIX SPRINKLER CABINET
FOR " OR " SPRINKLERS
P/N 312390