glass-reinforced plastics composite...
TRANSCRIPT
Glass-Reinforced Plastics Composite Poles
Why COMPILLAR columns?
colour – Masts are formed in a selected colored resin, characterized by high and long-term UV resistance. COMPILLAR columns, depending on type, may be finished matt or high gloss.
resistance – COMPILLAR columns do not corrode. Survive wood, aluminum, steel or concrete under the same conditions. COMPILLAR columns do not change their properties in the salty,acidic and humid environment, they are chemically resistant and environmentally friendly.
strength – Specific laminate strength is higher than steel. COMPILLAR poles are designed to withstand heavy wind loads.
electrical insulation – COMPILLAR columns are non-conductive, eliminate risk of electric shock.
weight – Weight of glass-fibre reinforced composite is a 4-times lower than the weight of steel. Due to the low mass COMPILLAR poles help to minimize costs of transportation and installation.
antigraffiti - surface of gelcoat is resistant to chemical solvents (eg. acetone). Cleaning of graffiti paint using above solvent does not affect the layer of gelcoat surface and colour.
passive safety - composite poles break as a result of vehicle impact, eliminating danger to passengers.
GRP composite poles can be buried in the ground due to their corrosion-resistant properties. This installation method is easy and cost-effective, as no concrete works are required. Light poles are shaped conically in heights of up to 9m in standard length.Compillar’s composite light poles can also be assembled by bolts. This tapered round
1A) ROUND-TAPERED LIGHT POLES – BOLTED ASSEMBLY (TYPE SSDPF)
profile features a fully corrosion-resistant composite base.The company’s products are low in weight; for instance, an 8m column is 40kg.
1. ROUND-TAPERED COMPOSITE LIGHT POLES
3m
4m
5m
6m
7m
8m
9m
3000
4000
5000
6000
7000
8000
9000
70
70
70
70
70
80
80
150
150
150
175
175
185
185
Pole H[mm] ST[mm] SP[mm]
Material: GRP Profile: tapered, ovalLuminaire assembly – diameter: 48/60/76mm Hatch dimensions: 300x85mm, 350x90 mmBolts distance: 200x200mm, 250x250mm, 300x300mm Colour: acc. to RAL palette
1B) ROUND-TAPERED LIGHT POLES – DIRECT BURIAL (TYPE SSW)
3m
4m
5m
6m
7m
8m
9m
3000
4000
5000
6000
7000
8000
9000
70
70
70
70
70
80
80
140
140
140
165
165
180
180
800
800
800
1000
1200
1200
1500
Pole H[mm] ST[mm] SP[mm] HW[mm]
Material: GRPProfile: tapered, ovalLuminaire assembly – diameter: 48/60/76mm Hatch dimensions: 300x85mm, 350x90 mmCable inlet dimensions: 150x50mmColour: acc. to RAL palette
2. DECORATIVE LIGHT POLES
3m
4m
5m
6m
7m
3000
4000
5000
6000
7000
70
70
70
70
70
Pole H[mm] ST[mm]
Compillar creates decorative poles in composite material, which can be specially designed for specific locations. The company offers architectural styling for historical, modern and contemporary buildings such as progressive urban areas and new shopping centres. Compillar’s accessories can be designed on request.
Material: GRPProfile: tapered, oval Luminaire assembly – diameter: 48/60/76mm Hatch dimensions: 300x85mm, 350x90 mmBolts distance: 250x250mmColour: acc. to RAL palette
Compillar has developed new composite lighting poles with a square-shaped column for modern spaces. These poles can measure up to 6m in height.
3m
4m
5m
6m
3000
4000
5000
6000
120
120
120
120
800
800
800
1000
Pole H[mm] ST=SP[mm] HW[mm]
3. SQUARE PROFILE COMPOSITE LIGHTING POLES
Material: GRPProfile: square Hatch dimensions: 350x90 mmCable inlet dimensions: 50x150mmColour: acc. to RAL palette
GRP composite poles are an ideal replacement for wooden telecommunication poles. When compared to wooden poles, composite columns have a longer service-life (60 years), weigh less and are insect-resistant.
Compillar’s composite poles for power transmission lines currently extend up to 10m in height. They are designed to withstand 500kg of load-resistance on top. Poles are easily installed in challenging and inaccessible environments.
4. GRP POLES FOR TELECOMMUNICATION AND POWER TRANSMISSION LINES APPLICATION
5. COMPOSITE POLES FOR CCTV MONITORING SYSTEMMeasuring up to 10m in height, Compillar CCTV composite poles are lightweight, corrosion-resistant and colour-adjusted according to their environment.
6m
7m
8m
9m
6000
7000
8000
9000
115
115
115
115
215
235
255
270
1000
1200
1200
1500
Pole H[mm] ST[mm] SP[mm] HW[mm]
Material: GRP Profile: tapered, oval Colour: acc. to RAL palette
Material: GRPProfile: tapered, oval Upper diameter: to be adjusted Colour: acc. to RAL palette
Compillar offers custom-designed trash bins as a light pole accessory, making them suitable for car parking applications. The trash bin is attachable using a stainless-
6. LIGHT POLE ACCESSORIES
steel clamp. It features a lock and key and can be coloured to match the tint of the light pole.
Material: composite nonflammable Capacity: 56L Weight: 5kgPole diameter: 130-200mmContents: set includes assembly steel clamp, lock and key
FLOWERPOTS
TRASH BIN
Material: GRP composite Colour: acc. to RAL palette
Aluminium jibs type WALS
WALS1500
WALS11000
WALS2500
WALS21000
WALS3500
WALS31000
WALS4500
WALS41000
500
1000
500
1000
500
1000
500
1000
70/80
70/80
70/80
70/80
70/80
70/80
70/80
70/80
60
60
60
60
60
60
60
60
1-4 arm jib L[mm] D[mm] d[mm]
Aluminium jibs type WALG
WALG600/800 600 800 60 70
1-arm jib L[mm] H[mm] d[mm] D[mm]
Material: aluminiumColour: powder coated acc. to RAL palette Weight: 2-10kg
LUMINAIRE JIBS
ELECTRICAL CONNECTIONS IZKCable connectors are intended for installation in recess of lighting column.
FOUNDATIONS
Insulating connector Fuse IZK-4-01Insulating connector phase IZK-4-02Insulating connector zero IZK-4-03
Prefabricated concrete foundation
F80V30
F120E40
F100V43
F120V43
800
1200
1000
1200
300
400
430
430
200
250
300
300
M18x45
M24x60
M24x60
M24x60
3-5m
3-7m
3-7m
7-9m
Foundation A[mm] B[mm] C[mm] D[mm] Pole H[m]
Passive safety BS EN 12767
Compillar performed calculations and simulations for composite pole for compliance with the passive safety standard. The contractor since 1993, has conducted in France about 100 tests for traffic safety devices annually, performs crash tests involving passenger cars, buses and trucks with weights from 900kg to 38000kg, which represents a full range of vehicles as defined in the standards EN 1317 and EN 12767.
The parameters for calculation
Type of pole - 9m tapered composite pole, circular section, direct burial assembly.
Calculation method - FEM finite element method - Program BarrLier - tests EN1317 and EN12767
Car model - BMW weighing 1500kg
Initial speed of 50 km/h , final speed 42 km/h.
The simulation result is NE (does not absorb energy).
COM/01/2013
ASI 2
010
(BW
)
Time [s]
0,25
0,2
0,15
0,1
0,05
0
0 1000 2000
column B
COMPILLAR lightpoles received CERTIFICATE OF CONFORMITY No. 1020-CPR-090034461 issued by Technical and Test Institute Prague. Compillar lightpoles meet the criteria of the standard EN 40-7: 2002
Compillar specialises in fibreglass-reinforced composite pole fabrication for a wide range of industries, including transport, chemical, power, security and telecommunications.
Glass-reinforced plastic (GRP) composite poles are an alternative to metal and
concrete lighting columns, and have a maintenance-free operating life.
The design of GRP laminate is resilient in humid, salty and windy conditions,
allowing Compillar to supply lighting poles to chemical environment plants, and
high-corrosion and high-voltage areas with no risk of injury.
Comparing strength to weight ratio, GRP composite material is stronger and four
times lighter in comparison to steel. This enables reduced transport and on-site
installation costs.
Masts are available in a wide array of coloured surfaces, have high and long-term
UV-resistance, and are environmentally sustainable.
Irysowa 3/1 street, 80-177 Gdansk, Polandtel.: +48 530 333 893, fax: +48 58 743 11 89 email: [email protected]
www.compillar.pl