gibson 2015 les paul traditional additional specifications · gibson 2015 les paul traditional...
TRANSCRIPT
Gibson 2015 Les Paul TraditionalAdditional Specifications
New and Improved in 2015
• Gibson G FORCE™ Tuning System: Faster, more accurate, additional tunings • Zero Fret Adjustable Nut (patent applied for): Added action adjustment • Upgraded Tune–o–matic bridge with titanium saddles: Ease of height adjustment and
sustain • Wider neck and fingerboard: Increased playing area with same string spacing • Comprehensive wood selection and grading: Rarest and finest materials for best
instruments • Thicker Rosewood Fingerboard: Increased mass for sustain • Pearl Inlays: Better appearance and value • Smoother sanded, buffed and oiled fingerboard: Improved playability and feel • Comprehensive Point Setup (Lower Frets, Improved Plek, Intonation): Silky smooth action
and bending, improved intonation • More robust cables: Stronger signal strength • Removable Pickguard: Choice with no holes in body • Les Paul 100th birthday signature: Honoring a genius with a facsimile of his actual signature
taken from a pickguard autographed by Les. • Les Paul Hologram: Authenticity and tribute • New & Improved Hardshell Case: Improved protection (up to 15 foot drop), sleek, ergonomic,
made in USA
Body
Top Back
Wood Species: Maple Mahogany
Pieces: 2 2
Grade (Top)/Density (Back): A+ Low
Binding: Cream None
Weight Relief: None
Glue: Franklin Titebond 50
Tonal, Resonant, and/orTechnical Effect:
The only guitar in the 2015 lineuphaving no weight relief provides asolid mass to generate maximum
sustain
Body Contour/Carve: Enhanced
Neck
Neck
Wood Species: Mahogany
Pieces: 1
Truss Rod: Les Paul
Profile: Rounded XL
Thickness at Fret 1: 22.86 mm / .900"
Thickness at Fret 12: 25.4 mm / 1.00"
Other Materials: Franklin Titebond 50
Tonal, Resonant, and/orTechnical Effect:
Having the largest neck in the core lineup the Rounded XL gives the player more mass and a stable platform for tuning accuracy.
Neck Fit
Joint Angle: 5 Degrees
Joint Angle Tolerance: 0 Deg 0 Min 15 Sec
Type: Mortise and Tenon
Adhesive: Franklin Titebond 50
Gauges Used: Pitch Height Gauge, Alignment Gauge
Fingerboard
Wood Species: Rosewood
Pieces: 1
Shade: Dark
Radius: 30.48 cm / 12"
Frets: 22
Nut/End of Board: 4.5993 cm / 1.795" @ Nut5.9944 cm / 2.360” @ End of Board
Scale: 62.865 cm / 24.75”
Binding: Cream
Side Dots (Color): Black
Inlay Style: Trapezoid
Inlay Material: Mother of Pearl
Dimensions: From 16.51 mm x 29.718 mm / 0.66" x 1.17" to 6.096 mm x 39.624 mm / 0.24" x 1.56"
Nut
Style: Zero Fret Nut
Material: Cryogenically Treated Brass
Width: 4.5993 cm / 1.795"
Slots: E: 1.4732 mm / 0.058 inchesA: 1.2192 mm / 0.048 inchesD: 0.9652 mm / 0.038 inchesG: 0.7112 mm / 0.028 inchesB: 0.4826 mm / 0.019 inches
e: 0.3556 mm / 0.014 inches
Peghead
Type: SP1-B
Inlay: Pearl
Peg Head Binding: None
Logo: Mother of Pearl “Gibson”
Silkscreen: Gold “Les Paul 100”
Headstock Angle: 17 Degrees
Finishes
Ocean Blue TobaccoSunburst
Placid Purple Honey Burst Heritage CherrySunburst
Color Code: OB TO PP HY HS
Surface Texture: Smooth/ Hi Gloss90 Sheen Lacquer
Smooth/ Hi Gloss90 Sheen Lacquer
Smooth/ Hi Gloss90 Sheen Lacquer
Smooth/ Hi Gloss90 Sheen Lacquer
Smooth/ Hi Gloss90 Sheen Lacquer
Filler: Clear Walnut Clear Walnut Walnut
Sealer: 1–1.5 mils 1–1.5 mils 1–1.5 mils 1–1.5 mils 1–1.5 mils
Top: Blue grainenhancer #620–
1196–H5PRS, Bluetint #64–1693–
H1CL, Pthalo blue#508–A5V–1186
Sunburst Yellow#508–Y5V–1167 w/
Tobacco Burst#KUS–NIT–10003
Placid Purple #50–11675–H5PRS
Sunburst Yellow#508–Y5V–1167 w/
Ice Tea Burst#508–1168A–
H5PRS
Sunburst Yellow#508–Y5V–1167
w/ HC Burst #508–D5V–1169
Top Coat: Hi Gloss Lacquer/90 Sheen 7–8 mils
Hi Gloss Lacquer/90 Sheen 7–8 mils
Hi Gloss Lacquer/90 Sheen 7–8 mils
Hi Gloss Lacquer/90 Sheen 7–8 mils
Hi Gloss Lacquer/90 Sheen 7–8 mils
Scraped: Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Pickups
Rhythm Lead
Style:1959 Tribute Humbucker (Nickel-Plated
Cover)1959 Tribute Humbucker (Nickel-Plated
Cover)
Winds/Coil: Screw side/Slug side: 5200 / 5000 5200 / 5000
Material of Wire (gauge): 42E 42E
Coil Dimensions (per coil): 6.6294 cm x 1.7272 mm / 2.61" x 0.68" 6.6294 cm x 1.7272 mm / 2.61" x 0.68"
Coil Material: ABS ABS
Coil Winding Process: Machine Wound Machine Wound
Pole Piece Material: Nickel Plated Steel Nickel Plated Steel
Pole Piece Position from Nut: 47.3075 cm / 18.625" 59.52998 cm / 23.437 inches
Slug Material: Nickel Plated Steel Nickel Plated Steel
Slug Dimensions (diameter xlength):
4.7498 mm x 1.24206 cm / 0.187 x 0.489" 4.7498 mm x 1.24206 cm / 0.187 x 0.489"
Magnet Material: Alnico #2 (smooth) Alnico #2 (smooth)
Magnet Position from Nut: 48.26 cm / 19" 58.7375cm / 23.125"
Magnet Dimensions: 6.35 cm x 1.27 mm / 2.5" x 0.5" 6.35 cm x 1.27 mm / 2.5" x 0.5"
Polarities: Screw side is the south pole of magnet Screw side is the south pole of magnet
Qfactor: 5.58 5.54
ResistanceDC: 7.65k ohms 7.65k ohms
Resonant Frequency: 2780 Hz 2770 Hz
Tonal & Resonant Advancements:
Classic humbucker tone with historically "unmatched" bobbin windings for vintagehumbucker tone with enhanced highs. Unbalanced windings similar to the Burstbuckerexcept with coil offset reversed. (Screw coil has more winds than slug coil). Reversed
coil offset designed to provide balance between coils, and still offer vintage humbuckervoice.
Electronics
Control Pocket Assembly Lead Volume Rhythm VolumeType: 500K Non–Linear 500K Non–Linear
Peak Voltage: 500V 500V
Range: 0–500K 0–500K
Power Rating: 1/4 watt above 100K ohms 1/4 watt above 100K ohms
Resistance Tolerance: +/– 20% +/– 20%
Minimum Resistance: 200 ohms 200 ohms
Lead/Rhythm ToneType: 500K Non–Linear
Peak Voltage: 500V
Range: 0–500K
Power Rating: 1/4 watt above 100K ohms
Resistance Tolerance: +/– 20%
Minimum Resistance: 200 ohms
Capacitors:Lead Value/Rhythm.022 uF
Hardware
Tuning Keys/Tuning Key DetailsStyle: G FORCE
Material: Zamak
Weight: 31.1845 gm / 1.1oz
Tuning Ratio: 40:1
Gear Type: Synchronized spur gear system
What is allowable turn: +/– 2 degrees
Plating specs: Nickel
Part numbers: 430–14301B / 430–14301T
String DimensionsE: 1.1684mm / 0.046"
A: 0.9144 mm / 0.036"
D: 0.6604 mm / 0.026"
G: 0.4064mm / 0.016"
B: 0.2794mm / 0.011"
e: 0.2286mm / 0.009"
BridgeStyle: Tune–o–matic w /Titanium saddles
Material: Zamak base
Plating Specs: Nickel plating on base only
Part number: 430–14384
Weight: 72.5748 gm / 2.56 oz
Dimensions of String Slots
E: 1.4732mm / 0.058"
A: 1.2192mm / 0.048"
D: 0.9652mm / 0.038"
G: 0.7112mm / 0.028"
B: 0.4826mm / 0.019''
e: 0.3556mm / 0.014"
TailpieceStyle: Stop Bar
Compensated: No
Material: Zamak
Plating Specs: Nickel
Part number: 430–10173
Weight: 82.21 gm / 2.9 oz
Output JackStyle: 1/4" mono with dual tip contact
Jack PlateStyle: Les Paul Square
Material: ABS– Cream
Part Number: 430–19299
Weight: 2.0 gm / 0.07 oz
Strap ButtonsMaterial: Aluminum
Plating Specs: None
Part numbers: 430–19160 / 430–19160E
Weight: 4.0 gm / 0.14 oz
Plastics
Pickguard
Style: New Removable Cream Pickguard
Part Number: 430–12509
Truss Rod Cover
Style: black/white bell hot stamp white "Traditional"
Part Number: 430–19376
Knobs
Style: Gold Supreme Grip Speed
Part Number: 430–31001
Dial Pointers
Yes/No: Yes
Control Plates(s) (Backplate Cover)
Style: Stainleess steel infused polycarbonate for Electrostatic Discharge protection
Part Number: 380–12209
Control Plates(s) (SwitchPlate Cover)
Style: Stainleess steel infused polycarbonate for Electrostatic Discharge protection
Part Number: 380–12211
Switch Washer
Style: Cream with hot stamp gold
Part Number: 430–19293
Trim Rings
Style: New Cream made for the removable pickguard (snaps & unsnaps into place)
Part Number: 440–14001 / 440–14002
Accessories
CaseStyle: Hard Shell
Color: Gold Molded
Strap Locks: No
Tools:Truss Rod Wrench, .050 + 2.5mm Allen wrenches, G FORCE Charging Adapter
Manual:Gibson USA Owner's and G FORCE QUICK START
COA/Other: None