gibson 2015 les paul standard additional specifications · gibson 2015 les paul standard additional...
TRANSCRIPT
Gibson 2015 Les Paul StandardAdditional Specifications
New and Improved in 2015
• Gibson G FORCE™ Tuning System: Faster, more accurate, additional tunings • Zero Fret Adjustable Nut (patent applied for): Added action adjustment • Upgraded Tune–o–matic bridge with titanium saddles: Ease of height adjustment and
sustain • Wider neck and fingerboard: Increased playing area with same string spacing • Comprehensive wood selection and grading: Rarest and finest materials for best
instruments • Thicker Rosewood Fingerboard: Increased mass for sustain • Pearl Inlays: Uniquely beautiful appearance • Smoother sanded, buffed and oiled fingerboard: Improved playability and feel • Comprehensive Point Setup (Lower Frets, Improved Plek, Intonation): Silky smooth action
and bending, improved intonation • Improved contact output jack: Secure contact and uninterrupted signal • More robust cables: Stronger signal strength • Removable Pickguard: Choice with no holes in body • Les Paul 100th birthday signature: Honoring a genius with a facsimile of his actual signature
taken from a pickguard autographed by Les. • Les Paul Hologram: Authenticity and tribute • New & Improved Hardshell Case: Improved protection (up to 15 foot drop), sleek, ergonomic,
made in USA
Body
Top Back
Wood Species: Maple Mahogany
Pieces: 2 2
Grade (Top)/Density (Back): AA Ultra Low
Binding: Cream None
Weight Relief: Modern
Glue: Franklin Titebond 50
Tonal, Resonant, and/orTechnical Effect:
The modern weight relief removesmore mahogany but retains the
resonance
Body Contour/Carve: Enhanced
Neck
Neck
Wood Species: Mahogany
Pieces: 1
Truss Rod: Les Paul
Profile: Slim Taper™ Asymmetrical
Thickness at Fret 1: 20.32 mm / .800"
Thickness at Fret 12: 22.225 mm / .875"
Other Materials: Franklin Titebond 50
Tonal, Resonant, and/orTechnical Effect:
The mahogany asymmetrical slim taper neck provides a ergonomic feelfor comfort and the mahogany adds a rich tonal quality
Neck Fit
Joint Angle: 5 Degrees
Joint Angle Tolerance: 0 Deg 0 Min 15 Sec
Type: Mortise and Tenon
Adhesive: Franklin Titebond 50
Gauges Used: Pitch Height Gauge, Alignment Gauge
Fingerboard
Wood Species: Rosewood
Pieces: 1
Shade: Dark
Radius: Compound 25.4 cm – 40.64 cm / 10"– 16"
Frets: 22
Nut/End of Board: 4.5993 cm / 1.795" @ Nut5.9944 cm / 2.360” @ End of Board
Scale: 62.865 cm / 24.75”
Binding: Cream
Side Dots (Color): Black
Inlay Style: Trapezoid
Inlay Material: Mother of Pearl
Dimensions: From 16.51 mm x 29.718 mm / 0.66" x 1.17" to 6.096 mm x 39.624 mm / 0.24" x 1.56"
Nut
Style: Zero Fret Nut
Material: Cryogenically Treated Brass
Width: 4.5993 cm / 1.795"
Slots: E: 1.4732 mm / 0.058 inchesA: 1.2192 mm / 0.048 inchesD: 0.9652 mm / 0.038 inchesG: 0.7112 mm / 0.028 inches
B: 0.4826 mm / 0.019 inchese: 0.3556 mm / 0.014 inches
Peghead
Type: SP1-B
Inlay: Mother of Pearl
Peg Head Binding: None
Logo: Mother of Pearl “Gibson”
Silkscreen: Gold “Les Paul 100”
Headstock Angle: 17 Degrees
Finishes
Heritage CherrySunburst Candy
TobaccoSunburst Candy
Trans AmberCherry Back
Candy
HoneyburstPerimeter Candy
Wine Red Candy
ColorCode:
H3 T3 A3 Y3 W3
SurfaceTexture:
Smooth/ Hi Gloss 90Sheen Lacquer
Smooth/ Hi Gloss 90Sheen Lacquer
Smooth/ Hi Gloss 90Sheen Lacquer
Smooth/ Hi Gloss 90Sheen Lacquer
Smooth/ Hi Gloss 90Sheen Lacquer
Filler: Walnut Walnut Walnut Walnut Walnut
Sealer: 1–1.5 mils 1–1.5 mils 1–1.5 mils 1–1.5 mils 1–1.5 mils
Top: Yellow Candy TransPearl #KUS NIT
10068–GL, VintageCherry Trans Pearl
#KUS NIT 10065–GL
Yellow Candy TransPearl #KUS NIT
10068–GL, Tobacco#KUS NIT 10003–GL
Yellow Candy TransPearl #KUS NIT
10068–GL, VintageCherry Trans Pearl
#KUS NIT 10065–GL
Yellow Candy TransPearl #KUS NIT
10068–GL, Ice TeaPearl #KUS–NIT
10134
Cabaret Pearl#KUS–NIT–10120
TopCoat:
Hi Gloss Lacquer/ 90Sheen
Hi Gloss Lacquer/ 90Sheen 7–8 mils
Hi Gloss Lacquer/ 90Sheen 7–8 mils
Hi Gloss Lacquer/ 90Sheen 7–8 mils
Hi Gloss Lacquer/ 90Sheen 7–8 mils
Scraped:
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Fingerboard Sides,Body and Nut
Pickups
Rhythm Lead
Style: Rhythm BB Pro Lead BB Pro
Winds/Coil: Screw side/Slug side: 5000 / 5200 5300 / 5500
Material of Wire (gauge): Enamel (42) Enamel (42)
Coil Dimensions (per coil): 6.6294 cm x 1.7272 mm / 2.61" x 0.68" 6.6294 cm x 1.7272 mm / 2.61" x 0.68"
Coil Material: ABS ABS
Coil Winding Process: Machine Wound Machine Wound
Pole Piece Material: Nickel Nickel Plated Steel
Pole Piece Position from Nut: 47.3075 cm / 18.625" 59.52998 cm / 23.437 inches
Slug Material: Nickel Plated Steel Nickel Plated Steel
Slug Dimensions (diameter xlength):
4.7498 mm x 1.24206 cm / 0.187 x 0.489" 4.7498 mm x 1.24206 cm / 0.187 x 0.489"
Magnet Material: Alnico V Alnico V
Magnet Position from Nut: 48.26 cm / 19" 58.7375cm / 23.125"
Magnet Dimensions: 6.35 cm x 1.27 mm / 2.5" x 0.5" 6.35 cm x 1.27 mm / 2.5" x 0.5"
Polarities: Screw side is the south pole of magnet Screw side is the south pole of magnet
Qfactor: 5.4 5.35
ResistanceDC: 7.64k ohms 7.98k ohms
Resonant Frequency: 2863 Hz 2780 Hz
Tonal & Resonant Advancements:Classic humbucker tone with historically "unmatched" bobbin windings for vintage
humbucker tone with enhanced highs.
Electronics
Control Pocket Assembly Lead Volume Rhythm Volume
Type:500K Non–Linear Push/
Pull500K Non–Linear Push/ Pull
Peak Voltage: 500V 500V
Range: 0–500K 0–500K
Power Rating: 1/4 watt above 100K ohms 1/4 watt above 100K ohms
Resistance Tolerance: +/– 20% +/– 20%
Minimum Resistance: 200 ohms 200 ohms
Lead/Rhythm ToneType: 500K Push/Pull Non–Linear
Peak Voltage: 500V
Range: 0–500K
Power Rating: 1/4 watt above 100K ohms
Resistance Tolerance: +/– 20%
Minimum Resistance: 200 ohms
Capacitors:Lead Value/Rhythm.022 uF
Hardware
Tuning Keys/Tuning Key DetailsStyle: G FORCE
Material: Zamak
Weight: 31.1845 gm / 1.1oz
Tuning Ratio: 40:1
Gear Type: Synchronized spur gear system
What is allowable turn: +/– 2 degrees
Plating specs: Chrome
Part numbers: 430–14299B / 430–14299T
String DimensionsE: 1.1684mm / 0.046"
A: 0.9144 mm / 0.036"
D: 0.6604 mm / 0.026"
G: 0.4064mm / 0.016"
B: 0.2794mm / 0.011"
e: 0.2286mm / 0.009"
Bridge
Style: Tune–o–matic w /Titanium saddles
Material: Zamak base
Plating Specs: Chrome
Part number: 430–14384
Weight: 72.5748 gm / 2.56 oz
Dimensions of String Slots
E: 1.4732mm / 0.058"
A: 1.2192mm / 0.048"
D: 0.9652mm / 0.038"
G: 0.7112mm / 0.028"
B: 0.4826mm / 0.019''
e: 0.3556mm / 0.014"
TailpieceStyle: Stop Bar
Compensated: No
Material: Zamak
Plating Specs: Chrome
Part number: 430–10173
Weight: 82.21 gm / 2.9 oz
Output JackStyle: 1/4" mono with dual tip contact
Jack PlateStyle: Les Paul Square
Material: Brass
Part Number: 430–19467
Weight: 6.0 gm / 0.21 oz
Strap ButtonsMaterial: Aluminum
Plating Specs: None
Part numbers: 430–19160 / 430–19160E
Weight: 4.0 gm / 0.14 oz
Plastics
Pickguard
Style: New Removable Cream Pickguard
Part Number: 430–12509
Truss Rod Cover
Style: Black and White Bell Hot Stamped White "Standard"
Part Number: 430–19398
Knobs
Style: Gold Supreme Grip Speed
Part Number: 430–31001
Dial Pointers
Yes/No: No
Control Plates(s) (Backplate Cover)
Style: Stainless steel infused polycarbonate for
Electrostatic Discharge Protection
Part Number: 380–12209
Control Plates(s) (SwitchPlate Cover)
Style: Stainless steel infused polycarbonate for Electrostatic Discharge Protection.
Part Number: 380–12211
Switch Washer
Style: Cream with hot stamp gold
Part Number: 430–19293
Trim Rings
Style: New Cream made for the removable pickguard (snaps & unsnaps into place)
Part Number: 440–14001 / 440–14002
Accessories
CaseStyle: Hard Shell
Color: Gold Molded
Strap Locks: No
Tools:Truss Rod Wrench, .050 + 2.5mm Allen wrenches, G FORCE Charging Adapter
Manual:Gibson USA Owner's and G FORCE QUICK START
COA/Other: None