REV A

<D

oc_

SU

B>

<D

oc_

PS

07

-00

94

_PR

OD

SP

EC

_CS

D>

<R

el_A

><

Lang

_EN

>

GETINGE CLEAN SINK DOSING (CSD)

PRODUCT SPECIFICATIONPRODUCTGetinge Clean Sink Dosing (CSD) is a multi-use, easy to operate detergent dosing system for better process control of manual sink cleaning applications. The CSD can also be used to dispense detergent to ultrasonic baths.

Getinge CSD unit is easy to install, and depending on local regulations it is typically fitted on the wall behind the sink.

The Getinge CSD includes;

Base unitWith two peristaltic pumps prepared for single or dual pump modes, it can be used for up to two different detergents and two sinks, or other units that need precise dosing of process chemicals. If the single pump mode is used, the second pump serves as a back-up.

Temperature probeEnsures optimal cleaning temperatures and helps prevent hot water scalding. The display will signal when tempera-ture is out of range (adjustable).

Installation kitAll necessary parts for a complete installation of the Getinge CSD; see page 3.

Advanced control interfaceIncludes interface for optional remote start switch and low level detergent alarm.

INTENDED USEThe Getinge Clean Sink Dosing is used to deliver Getinge Clean process chemicals into a pre-cleaning sink for soaking and manual cleaning of various items*. Getinge Clean Sink Dosing uses a computer controlled peristaltic pump to deliver the exact amount process chemicals, at the optimal temperature and dilution rate according to the recommendations of the manufacturer.

*For cleaning of surgical instruments, always follow the recom-mendation from the instrument manufacturer in accordance to ISO 17664:2004

• Two reliable peristaltic pumps for dosing into two different basins (sink or sonic) or dosing of two different detergents with a single system• Capable of dosing two programmable levels (half and full sink) at the unit or with a single button actuation at the remote switch (optional)• Temperature probe ensures dosing of detergent at the right temperature for maximum cleaning efficiency• Temperature continuously monitored and shown on the LED display• Intuitive user interface and digital programming menu in: English, Spanish, French, German and Swedish.• Informative panel with backlight LED for status indication• Adapted transformer for easy installation• Compatible with most detergent containers• Optional low-level alarm for detergent container- alarm indication in LED display• Optional remote switch or foot pedal for remote operation

Clean Sink Dosing

A/1

B/2

REV A

<D

oc_

SU

B>

<D

oc_

PS

07

-00

94

_PR

OD

SP

EC

_GE

TIN

GE

CS

D>

<R

el_A

><

Lang

_EN

>

INTUITIVE USER INTERFACE WITH BACKLIGHT COLOR LED FOR INDICATION OF STATUS

STANDARDS AND CODESCE-marked according to the Low Voltage Directive (LVD) 2006/95/EC Standards:

• IEC 61010-1(2nd edition) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General

• EN 61326 Electrical Equipment Measurement, Control & Laboratory Use

• UL 61010-1 and CAN/CSA-C22.2No 61010-1-04

DOCUMENTATIONGetinge CSD is supplied with a multi-language documentation in: English, Spanish, French, German and Swedish

• Quick guide

• Installation, user, technical and parts manual

TECHNICAL DATAPower supply

Transformer (included): Input: 100 – 240VAC, 50/60Hz, 30W

Output: 24VDC, 1.25A

Max flow rate pump: 100 ml/min

Dispensed accuracy: +/- 10% (Volume > 10ml)

Maximum pump suction: 6 meters (20ft)

Maximum pump discharge: 45 meters (147ft)

Remote switch dual Potential free contacts (2 × N/O), incl. 5m (16ft) cable

Signal inputs: 2 × Low detergent level input (2 × N/C)

1 × Temperature input (NTC), 2.8m (9ft) long

2 x Remote start inputs (used with the dual remote control)

Dimensions base unit 175 × 145 × 210 mm, (7 × 6 × 9 in.) W × D × H

Dimensions remote switch 65 × 25 × 105 mm, (2.5 × 1 × 4 in.) W × D × H

Weight: 3.6 Kg (8 lbs.)

Degree of protection, enclosure IP55

Ambient Operating Range: 10 to 50 deg. C (50 to 122 F)

Storage Temperature Range: -20 to 70 deg. C (-4 to 158 F)

Ambient Humidity Range (operating) 10% to 90%

Enclosure material: ABS (case) / Polycarbonate (cover)

Overlay material: Polycarbonate

Suction cup material: PVC

Transport tube Material: PVC

Squeeze tube material (pump) Norprene

= OK

= Dispensing mode

= Alarm mode

REV A

<D

oc_

SU

B>

<D

oc_

PS

07

-00

94

_PR

OD

SP

EC

_CS

D>

<R

el_A

><

Lang

_EN

>

ORDERING INFORMATIONGETINGE CLEAN SINK DOSING, Part number: 504341600

Incl.: Control unit with multi adapter kit for the transformer,1 x temperature probe, wall-mounted bracket, screwsand installation kits for two pumps.

Installation kit for two pumps (included) • 2 x Suction Cup, 1\ OD PVC • 2 x Check Valve, 1/2 PSI Cracking Pressure, 1/4 x 1/4 Barb, Viton • 20 x Cable Ties 3.5” • 8 x Cable Tie Mounts • 5 x Clamp, PVC, .406” • 2 x Fitting, Black-1/4 Barb X 1/4 Barb • 2 x Ceramic Tube Weight • 2 x Bottom Check Valve with Debris Filter Foot, EPDM • 2 x Tube, T-38V PVC 1/4Id X 3/8Od X 4.5m (15Ft.) (cut to fit)

OPTIONAL ACCESSORIESRemote switch – dual, Part number: 6001073701

Dual remote switch for convenient positioning and ergonomic activation of the system.Easy configuration to control dual dosing volumes (A + B) or dual pumps (1+2) Note! The remote is needed when using the 2nd pump in dual pump mode operationincl. 5m (16 feet) cable.Dimensions: 65 x 25 x 105 mm, (2.5x1x4 in.) W x D x H

Low level alarm, Part number: 6001073801

Suction wand with built in low level alarm.Display turns red when low level is reached in the detergent container.Y-splitter barb adapter is included if one container will feed both pumps. If two different detergents are to be used;two low level alarms are required, incl. 3 m (10 feet) hose and cable

Foot pedal, Part number: 6001073901

For ergonomic and easy start of the dispense cycle. Up to two foot pedals can be used for the CSD unit.If two pump or volumes shall be activated, two foot pedals arerequired. Degree of protection IP65, incl. 2m cableDimensions: 72 x 28 x 96 mm, (2.8x1.1x3.8 in.) W x D x H

1

2

Clean Sink DosingA/1B/2

REV A

<D

oc_

SU

B>

<D

oc_

PS

07

-00

94

_PR

OD

SP

EC

_GE

TIN

GE

CS

D>

<R

el_A

><

Lang

_EN

>

EXAMPLE OF INSTALLATIONS WITH GETINGE CLEAN SINK DOSING

1 Detergent, 1 sink1 Detergent, 2 sinks

Clean Sink Dosing

A/1

B/2

Clean Sink Dosing

A/1

B/2

Clean Sink Dosing

2 different detergents, 1 sink

Clean Sink Dosing

A/1

B/2

2 different detergents, 2 sinks

Note!1) One of the sinks in the configurations could also be e.g ultrasonic baths etc.

Note!2) The Getinge Clean Sink Dosing system (CSD) can be included and supplied from the Getinge Clean Management System (CMS).

REV A

<D

oc_

SU

B>

<D

oc_

PS

07

-00

94

_PR

OD

SP

EC

_CS

D>

<R

el_A

><

Lang

_EN

>

Getinge Australia Pty Ltd PO Box 50Bulimba QLD 4171AustraliaE-mail: info@getinge.com.auCust Support: 1300 155 500Phone: +61 7 3399 3311 Fax: +61 7 3395 6712

BelgiumGetinge NV Vosveld 4 B-2 B-2110 Wijnegeminfo@getinge.bePhone: +32-33 542 865

CanadaGetinge Canada Ltd6685, Millcreek DriveUnit 3 Mississauga, Ontario L5N5M5Canadacustomercare@getinge.caPhone: 905-363-4150

ChinaGetinge (Suzhou) Co.Ltd No.158,Fang Zhou Road, Suzhou Industrial Park 15021 Suzhou, Jiangsu Province P.R.China info@getinge.com.cnPhone: +86- 51 262 838 966

Getinge Shanghai Trading Co. Ltd. Rm 1988 Tower B, CityCentr, 100 Zunyi Rd. 200051 Shanghai P.R.info@getinge.com.cnPhone: +86- 21 623 72 408

DenmarkGetinge Danmark A/SIndustriparken 44 BDK-2750 BallerupPhone +45 45 93 27 27Fax +45 45 93 41 20

FinlandGetinge Finland AB Ängsgatan 8 FI-02200 Esbo getinge@getinge.fi Phone: +35-89 6824 120

FranceGetinge France SASBP 49, avenue du CanadaZA de CourtaboeufLes Ulis, FR-91942getinge.france@getinge.frPhone: +33-1 64 86 89 00

GermanyGetinge Vertrieb & Service GmbH Kehler Strasse 31 764 37 RASTATTGermanyTel: +49-7222 932 306Fax: +49-7222 932 597e-mail: info.inco-de@getinge.com

ItalyGetinge S.p.A via Poggio Verde, 34 00148 Romainfo@getinge.itPhone: +39-06 656 631

JapanToshin Takanawa Build. 9F, 3-11-3 Takanawa Minato-Ku Tokyo JP-108-0074 Phone: +81 3 5791 7560

NetherlandsGetinge B.V.Fruiteniersstraat 27, ZwijndrechtPostbus 1004NL-3330 CA Zwijndrechtinfo@getinge.nlPhone: +31-78 610 24 33

NorwayGetinge Norge A/S Strandveien 13 1366 LysakerNorwayinfo@getinge.noPhone: +47-23 03 52 00

PolandGetinge PolandUl. Lirowa 2702-387 Warszawaoffi ce@getinge.plPhone: +48-22 882 06 26

SingaporeGetinge International Far East Pte. Ltd.20 Bendemeer Road,#06-02, Cyberhub BuildingSingapore, SG-339914Phone: + 65- 6396 7298

South AfricaGetinge South Africa (Pty) LtdP O Box 48492HerculesPretoria SA 0002getinge@mweb.co.zaPhone: +27-123 721 370

SpainGetinge Iberica SLC/ Marie Curie, 5Edifi cio Alfa, Planta 6ª28521 Rivas VaciamadridSPAINadministracion@getinge.esPhone: + 34-916 78 26 26

SwedenGetinge Sverige ABP O Box 69SE-310 44 Getingeinfo@getinge.comPhone: +46-10 335 00 00

Switzerland Getinge ALFA AGWeidenweg 174310 Rheinfeldeninfo@alfa.agwww.getingealfa.chPhone: +41-61 836 15 15

United KingdomGetinge UK LtdOrchard WayCalladine ParkSutton-In-Ashfi eldNotts NG 17 1JUsales@getinge.co.ukPhone: +44-1623510033

USAGetinge USA Inc.1777 East Henrietta RoadRochester, NY 14623-3133info@getingeusa.comwww.getingeusa.comPhone: +1-5,854,751,400

www.getinge.com