genex nastar wcdma transdata user manual
TRANSCRIPT
GENEX Nastar WCDMA Transdata
User Manual Contents
Issue 04 (2009-03-02) Huawei Technologies Proprietary i
Contents
1 Introducing the Transdata ........................................................................................................... 7
2 Introducing the Main Interface .................................................................................................. 8
About This Chapter ................................................................................................................................................ 8
2.1 Logging in to Server ......................................................................................................................................... 9
2.2 Introducing the Entrance to the Task .............................................................................................................. 10
2.3 Introducing the Shortcut Menu....................................................................................................................... 12
2.4 Introducing the Menu Bar .............................................................................................................................. 15
2.4.1 Project Menu ......................................................................................................................................... 15
2.4.2 Task Menu ............................................................................................................................................. 16
2.4.3 Setting Menu ......................................................................................................................................... 16
2.4.4 Help Menu ............................................................................................................................................ 17
2.5 Introducing the Toolbar .................................................................................................................................. 20
3 Managing the Project and Task ................................................................................................ 22
About This Chapter .............................................................................................................................................. 22
3.1 Managing a Project ........................................................................................................................................ 23
3.1.1 Creating a Project .................................................................................................................................. 23
3.1.2 Managing Projects ................................................................................................................................ 25
3.1.3 Backing Up a Project ............................................................................................................................ 27
3.1.4 Restoring to a Existing Project .............................................................................................................. 27
3.1.5 Restoring a Project as a New Project .................................................................................................... 28
3.1.6 Deleting a Project .................................................................................................................................. 29
3.2 Managing a Task ............................................................................................................................................ 29
3.2.1 Introducing the Task States ................................................................................................................... 29
3.2.2 Editing the Data Import Task ................................................................................................................ 30
3.2.3 Editing the Data Delete Task ................................................................................................................. 32
3.2.4 Starting a Task ....................................................................................................................................... 34
3.2.5 Stopping a Task ..................................................................................................................................... 34
3.2.6 Moving a Task ....................................................................................................................................... 35
4 Managing the Data...................................................................................................................... 36
About This Chapter .............................................................................................................................................. 36
4.1 Importing the Project Parameters ................................................................................................................... 37
Contents
GENEX Nastar WCDMA Transdata
User Manual
ii Huawei Technologies Proprietary Issue 04 (2009-03-02)
4.2 Deleting the Project Parameters ..................................................................................................................... 39
4.3 Mananaging Data ........................................................................................................................................... 40
4.3.1 Importing the Configuration Parameters ............................................................................................... 40
4.3.2 Deleting a Configuration Parameter Data ............................................................................................. 42
4.3.3 Importing a Performance Data .............................................................................................................. 44
4.3.4 Deleting a Performance Data ................................................................................................................ 47
4.3.5 Importing a CHR Data .......................................................................................................................... 49
4.3.6 Deleting a CHR Data ............................................................................................................................ 52
4.3.7 Importing an IOS Data .......................................................................................................................... 54
4.3.8 Deleting an IOS Data ............................................................................................................................ 56
4.3.9 Importing a RTWP Data ........................................................................................................................ 58
4.3.10 Deleting a RTWP Data ........................................................................................................................ 62
4.3.11 About Importing and Deleting Data As Plan ....................................................................................... 63
GENEX Nastar WCDMA Transdata
User Manual Figures
Issue 04 (2009-03-02) Huawei Technologies Proprietary iii
Figures
Figure 2-1 Login Server dialog box ...................................................................................................................... 9
Figure 2-2 Main interface of the GENEX Nastar Transdata ............................................................................... 10
Figure 2-3 All tasks displayed in the task pane ................................................................................................... 11
Figure 2-4 Tasks of the selected project .............................................................................................................. 11
Figure 2-5 Display tasks of a data ....................................................................................................................... 12
Figure 2-6 Shortcut menu of the WCDMA node ................................................................................................ 12
Figure 2-7 Right-click shortcut menu of a data ................................................................................................... 13
Figure 2-8 Imported MML file manage ............................................................................................................... 13
Figure 2-9 Query Result dialog box .................................................................................................................... 14
Figure 2-10 Shortcut menu of a task ................................................................................................................... 14
Figure 2-11 System menu .................................................................................................................................... 15
Figure 2-12 Project menu .................................................................................................................................... 15
Figure 2-13 Task menu ........................................................................................................................................ 16
Figure 2-14 Setting menu .................................................................................................................................... 17
Figure 2-15 Output Bar ....................................................................................................................................... 17
Figure 2-16 Help menu ........................................................................................................................................ 18
Figure 2-17 About Transdata dialog box ............................................................................................................. 18
Figure 2-18 Get ESN Code dialog box ................................................................................................................ 18
Figure 2-19 License Info dialog box ................................................................................................................... 19
Figure 2-20 Open dialog box ............................................................................................................................... 20
Figure 2-21 Toolbar ............................................................................................................................................. 20
Figure 3-1 Project menu ...................................................................................................................................... 23
Figure 3-2 New Project on the right-click shortcut menu ................................................................................... 23
Figure 3-3 Create WCDMA Project dialog box .................................................................................................. 24
Figure 3-4 New project listed in the Project View pane ...................................................................................... 25
Figure 3-5 Project menu ...................................................................................................................................... 25
Figures
GENEX Nastar WCDMA Transdata
User Manual
iv Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 3-6 Management on the right-click shortcut menu .................................................................................. 26
Figure 3-7 Manage WCDMA Projects ................................................................................................................ 26
Figure 3-8 Browse for Folder dialog box ............................................................................................................ 27
Figure 3-9 Please select backup project file dialog box ...................................................................................... 28
Figure 3-10 Restore Project dialog box ............................................................................................................... 29
Figure 3-11 Edit Task on the shortcut menu ........................................................................................................ 30
Figure 3-12 Data Import Task Setting dialog box—Configuration Data ............................................................. 31
Figure 3-13 Edit Task on the shortcut menu ........................................................................................................ 32
Figure 3-14 Data Delete Task Setting dialog box ................................................................................................ 33
Figure 4-1 Import Engineering Parameter on the shortcut menu ........................................................................ 37
Figure 4-2 Open dialog box ................................................................................................................................. 37
Figure 4-3 Select Excel Sheet dialog box ............................................................................................................ 38
Figure 4-4 Project Parameter Import Setting dialog box ..................................................................................... 38
Figure 4-5 Delete Engineering Parameter dialog box ......................................................................................... 39
Figure 4-6 Delete Engineering Parameter dialog box ......................................................................................... 39
Figure 4-7 Message in the Output pane ............................................................................................................... 40
Figure 4-8 Data Import Task Setting dialog box—Config Data Delete ............................................................... 41
Figure 4-9 Data Delete Task Setting—Config Data Delete ................................................................................. 43
Figure 4-10 Data Import Task Setting dialog box—Performance Data Import ................................................... 45
Figure 4-11 Query Result dialog box .................................................................................................................. 47
Figure 4-12 Data Delete Task Setting dialog box—Performance Data Delete .................................................... 48
Figure 4-13 Data Import Task Setting dialog box—CHR Data Import ............................................................... 50
Figure 4-14 Set CHR Import Condition dialog box ............................................................................................ 52
Figure 4-15 Data Delete Task Setting dialog box —CHR Data Delete ............................................................... 53
Figure 4-16 Data Import Task Setting dialog box—IOS Data Import ................................................................. 55
Figure 4-17 Data Delete Task Setting dialog box—IOS Data Delete .................................................................. 57
Figure 4-18 Data Import Task Setting dialog box—RTWP Data Import ............................................................ 59
Figure 4-19 RTWP TXT File Information dialog box ......................................................................................... 61
Figure 4-20 Data Delete Task Setting dialog box—RTWP Data Delete ............................................................. 62
GENEX Nastar WCDMA Transdata
User Manual Figures
Issue 04 (2009-03-02) Huawei Technologies Proprietary v
Tables
GENEX Nastar WCDMA Transdata
User Manual
vi Huawei Technologies Proprietary Issue 04 (2009-03-02)
Tables
Table 2-1 Login Server dialog box ........................................................................................................................ 9
Table 2-2 Main interface of the GENEX Nastar Transdata ................................................................................. 10
Table 2-3 Shortcut menu of the WCDMA node .................................................................................................. 13
Table 2-4 Shortcut menu of a task ....................................................................................................................... 15
Table 2-5 Descriptions of the Project menu ......................................................................................................... 16
Table 2-6 Descriptions of the Task menu. ............................................................................................................ 16
Table 2-7 Descriptions of the View menu. ........................................................................................................... 17
Table 2-8 Description of the button icons on the Toolbar .................................................................................... 20
Table 3-1 Descriptions of he Create WCDMA Project dialog box ...................................................................... 24
Table 3-2 Descriptions of the Manage WCDMA Projects dialog box ................................................................. 26
Table 3-3 Task states ............................................................................................................................................ 30
Table 3-4 Descriptions of the data Import Task Setting dialog box ..................................................................... 31
Table 3-5 Descriptions of the Data Delete Task Setting dialog box .................................................................... 33
Table 4-1 Descriptions of the Data Import Task Setting dialog box .................................................................... 41
Table 4-2 Descriptions of the Data Delete Task Setting dialog box. ................................................................... 43
Table 4-3 Descriptions of the Data Import Task Setting dialog box .................................................................... 45
Table 4-4 Descriptions of the Data Delete Task Setting dialog box .................................................................... 48
Table 4-5 Descriptions of the Data Import Task Setting dialog box .................................................................... 50
Table 4-6 Descriptions of the Data Delete Task Setting dialog box—CHR Data Delete .................................... 53
Table 4-7 Descriptions of the Data Import Task Setting dialog box .................................................................... 55
Table 4-8 Descriptions of the Data Delete Task Setting dialog box .................................................................... 57
Table 4-9 Descriptions of the Data Import Task Setting dialog box .................................................................... 59
Table 4-10 RTWP TXT File Information dialog box ........................................................................................... 61
Table 4-11 Descriptions of the Data Delete Task Setting dialog box ................................................................... 62
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 7
1 Introducing the Transdata
The Transdata is the assistant software for GENEX Nastar WCDMA. The Transdata can
automatically import or delete project data of the GENEX Nastar WCDMA projects to save
time for maintaining multiple projects, especially in the server mode when there are many
projects.
This tool provides the following functions:
Managing projects
For details, refer to section 3.1 "Managing a Project."
Managing tasks
For details, refer to section 3.2 "Managing a Task."
Managing data
For details, refer to chapter 4 "Managing the Data."
Currently, the Transdata provides to import the following six data:
Configuration parameter data
Performance data
Project parameter data
CHR data
IOS data
RTWP data
Tables
GENEX Nastar WCDMA Transdata
User Manual
8 Huawei Technologies Proprietary Issue 04 (2009-03-02)
2 Introducing the Main Interface
About This Chapter
The following table lists the contents of this chapter.
Section Describes
2.1 Logging in to Server Describes the procedure for logging in to the Server.
2.2 Introducing the Entrance to
the Task
Introduces the entrance to the task.
2.3 Introducing the Shortcut
Menu
Introduces the menu items on the shortcut menu.
2.4 Introducing the Menu Bar Introduces the menu items on the menu bar.
2.5 Introducing the Toolbar Introduces the icons on the toolbar.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 9
2.1 Logging in to Server
To log in to sever, perform the following steps:
Step 1 Start the Transdata.
The Login Sever dialog box is displayed, as shown in Figure 2-1.
Figure 2-1 Login Server dialog box
Table 2-1 describes the elements in the Login Server dialog box.
Table 2-1 Login Server dialog box
Element Description
SQL server Select a database server.
User name Type the user name.
Password Type the password.
Step 2 Select the database server in the SQL server drop-down list.
Step 3 Type the user name and password in the User name and Password fields.
Step 4 Click Login.
After you succeed in logging in to the server, the main interface of the Transdata is displayed,
as shown in Figure 2-2.
Tables
GENEX Nastar WCDMA Transdata
User Manual
10 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 2-2 Main interface of the GENEX Nastar Transdata
Table 2-2 describes the elements in the main interface of the GENEX Nastar Transdata.
Table 2-2 Main interface of the GENEX Nastar Transdata
Element Description
Project View pane Lists the projects of the WCDMA node on the left part.
Task pane Shows tasks for each project in detail on the top-right
part.
Output pane Shows the process status of each task on the bottom-right
part.
----End
2.2 Introducing the Entrance to the Task
To view each task, perform the following steps:
Step 1 Click the WCDMA node in the Project View pane.
All tasks are displayed in the task pane, as shown in Figure 2-3.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 11
Figure 2-3 All tasks displayed in the task pane
Step 2 Click a sub-node (project) of the WCDMA node.
The tasks of the selected project are displayed in the task pane, as show in Figure 2-4.
Figure 2-4 Tasks of the selected project
Tables
GENEX Nastar WCDMA Transdata
User Manual
12 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Step 3 Click a data such as Config Data of a project in the Project View pane.
The tasks of the selected data are displayed, as shown in Figure 2-5.
Figure 2-5 Display tasks of a data
----End
2.3 Introducing the Shortcut Menu
Select different sub-menus on the shortcut menu to perform relevant functions.
Shortcut Menu of the WCDMA Node
Select the WCDMA node, and right-click on the WCDMA node.
The shortcut menu of the WCDMA node is displayed, as shown in Figure 2-6.
Figure 2-6 Shortcut menu of the WCDMA node
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 13
Table 2-3 describes the shortcut menu of the WCDMA node.
Table 2-3 Shortcut menu of the WCDMA node
Menu Item Description
New Project Creates a project
Management Manages the projects
Refresh Refreshes the WCDMA node.
Shortcut Menu of a Data Node
To show the shortcut menu of a data node, perform the following steps:
Step 1 Select a data of a project in the Project View pane, and right-click on the selected data.
The shortcut menu of the data is displayed, as shown in Figure 2-7.
Figure 2-7 Right-click shortcut menu of a data
Step 2 Select Query on the shortcut menu of Config Data, the Imported MML file manage dialog
box is displayed, as shown in Figure 2-8.
Figure 2-8 Imported MML file manage
Tables
GENEX Nastar WCDMA Transdata
User Manual
14 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Step 3 Select Query on the shortcut menu of other data, the Query Result dialog box is displayed,
as shown in Figure 2-9.
Figure 2-9 Query Result dialog box
NOTE The Query function doesn’t support Project parameter data. The Query Result dialog box lists the
information of the imported data.
Shortcut Menu of a Task
Select a task in the task pane, and right-click on the selected task.
The shortcut menu of a task is displayed, as shown in Figure 2-10.
Figure 2-10 Shortcut menu of a task
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 15
Table 2-4 describes the shortcut menu of a task.
Table 2-4 Shortcut menu of a task
Menu Item Description
Start Task Starts a task.
Stop Task Stops a task.
Edit Task Edits a task.
NOTE
The shortcut menu of Project parameter data task is different from other data. The menu item
is Execute.
2.4 Introducing the Menu Bar
The menu bar includes the following four menus, as shown in Figure 2-11.
Figure 2-11 System menu
2.4.1 Project Menu
The Project menu contains commands relevant to project management, as shown in Figure
2-12.
Figure 2-12 Project menu
Table 2-5 describes menu items of the Project menu.
Tables
GENEX Nastar WCDMA Transdata
User Manual
16 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Table 2-5 Descriptions of the Project menu
Menu Item Description
New Project Creates a project.
Management… Manages projects.
Refresh Refreshes the Project View pane.
Exit Exits from the Transdata program.
2.4.2 Task Menu
The Task menu contains commands for task management, as shown in Figure 2-13.
Figure 2-13 Task menu
Table 2-6 describes menu items of the Task menu.
Table 2-6 Descriptions of the Task menu.
Menu Item Description
Start Task Starts a task.
Stop Task Stops a task.
Edit Task Edits a task.
2.4.3 Setting Menu
The Setting menu contains the functions of displaying bars, as shown in Figure 2-14.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 17
Figure 2-14 Setting menu
Table 2-7 describes the menu items of the Setting menu.
Table 2-7 Descriptions of the View menu.
Menu Item Description
Toolbar Click to show or hide the toolbar.
Status Bar Click to Show or hide the status bar.
Work Space Click to show or hide the workspace.
Output Bar Click to show or hide the output bar.
If Output Bar is selected, you can see the
details of the task execution in the Output
pane. The normal output shows in black font,
and the error or warning shows in red font, as
shown in Figure 2-15.
Detail Log If Detail Log is selected, the details of task
execution will be recorded in the log file.
Figure 2-15 Output Bar
2.4.4 Help Menu
The Help menu mainly contains the version information, ESN code information and
copyright of the Transdata tool, as shown in Figure 2-16.
Tables
GENEX Nastar WCDMA Transdata
User Manual
18 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 2-16 Help menu
About Transdata
Choose Help > About Transdata…, the About Transdata dialog box is displayed, as shown
in Figure 2-17.
Figure 2-17 About Transdata dialog box
The About Transdata dialog box shows the version information and copyright information.
ESN Code
Choose Help > ESN Code, the Get ESN Code dialog box is displayed, as shown in Figure
2-18.
Figure 2-18 Get ESN Code dialog box
Get ESN Code dialog box provides relevant ESN code of the software.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 19
License Information
Choose Help > License Information, the License Info dialog box is displayed, as shown in
Figure 2-19.
Figure 2-19 License Info dialog box
In the License Info dialog box, you can view the license information.
Update License
To update license, perform the following steps:
Step 1 Choose Help > Update License.
The Open dialog box is displayed, as shown in Figure 2-20.
Tables
GENEX Nastar WCDMA Transdata
User Manual
20 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 2-20 Open dialog box
Step 2 Select the license file, and click Open.
Step 3 Click Continue on the displayed dialog to confirm the operation.
----End
2.5 Introducing the Toolbar
The toolbar consists of the following buttons, as shown in Figure 2-21.
Figure 2-21 Toolbar
Table 2-8 describes the button icons on the Toolbar.
Table 2-8 Description of the button icons on the Toolbar
Icon Hint Description
New Project Creates a project.
Project Management Manages projects.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 21
Icon Hint Description
Start Task Starts a task.
Stop Task Stops a task.
Edit Task Edits a task.
Tables
GENEX Nastar WCDMA Transdata
User Manual
22 Huawei Technologies Proprietary Issue 04 (2009-03-02)
3 Managing the Project and Task
About This Chapter
The following table lists the contents of this chapter.
Section Describes
3.1 Managing a Project Describes how to manage a project.
3.2 Managing a Task Describes how to manage a task.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 23
3.1 Managing a Project
All functions of the GENEX Nastar WCDMA are based on project. Users can share
information between different computers by backup and restoring project. This section
describes how to manage the projects in the Nastar.
3.1.1 Creating a Project
To create a project, perform the following steps:
Step 1 Start the function of creating a project.
To create a project, perform one of the following three methods:
Choose Project > New Project, as shown in Figure 3-1.
Figure 3-1 Project menu
Click on the toolbar.
Right-click on the WCDMA node in the Project View pane, and then select New
Project on the shortcut menu, as shown in Figure 3-2.
Figure 3-2 New Project on the right-click shortcut menu
The Create WCDMA Project dialog box is displayed, as shown in Figure 3-3.
Tables
GENEX Nastar WCDMA Transdata
User Manual
24 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 3-3 Create WCDMA Project dialog box
Table 3-1describes the elements of the Create WCDMA Project dialog box.
Table 3-1 Descriptions of he Create WCDMA Project dialog box
Element Description
Version list Select a version for the new project.
Name Enter a name for the project.
The name is consisted of letter, number, and underline.
Project Location Click to select the path for saving the project.
Description Type the descriptions of the project.
The Description field is optional.
Step 2 Select the version, type a project name and set path.
Step 3 Click Create.
The new project is added to the WCDMA node in the Project View pane, as shown in Figure
3-4.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 25
Figure 3-4 New project listed in the Project View pane
NOTE When create a new project, select a RNC version is necessary and for each project support one RNC
version only.
----End
3.1.2 Managing Projects
To manage a project, perform one of the following three methods:
Choose Project > Management…, as shown in Figure 3-5.
Figure 3-5 Project menu
Click on the Toolbar.
Right-click on the WCDMA node in the Project View pane, and then select
Management on the shortcut menu, as shown in Figure 3-6.
Tables
GENEX Nastar WCDMA Transdata
User Manual
26 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 3-6 Management on the right-click shortcut menu
The Manage WCDMA Projects dialog box is displayed, as show in Figure 3-7.
Figure 3-7 Manage WCDMA Projects
Table 3-2 describes the Manage WCDMA Projects dialog box.
Table 3-2 Descriptions of the Manage WCDMA Projects dialog box
Element Description
Project List Name The name of a project.
Description The descriptions of a project.
Create Date The date when the project is created.
Edit Date The date when the data is edited.
Disk Space The occupancy disk space of a project.
Version The version information of a project.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 27
Element Description
Click to backup a selected project.
Click to restore a project.
Click to delete the selected project.
Click to exit from the Manage WCDMA
Projects dialog box.
3.1.3 Backing Up a Project
To back up a project, perform the following steps:
Step 1 Select a project in the Manage WCDMA Projects dialog box, as shown in Figure 3-7.
Step 2 Click Backup.
The Browse for Folder dialog box is displayed, as shown in Figure 3-8.
Figure 3-8 Browse for Folder dialog box
Step 3 Select a path for saving the selected project, and click OK.
The project is saved as a backup file with the same name as the selected project.
3.1.4 Restoring to a Existing Project
To restore a project to an existing project, perform the following steps:
Step 1 Select a project in the Manage WCDMA Projects dialog box, as shown in Figure 3-7.
Tables
GENEX Nastar WCDMA Transdata
User Manual
28 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Step 2 Click Restore.
The Please select backup project file dialog box is displayed, as shown in Figure 3-9.
Figure 3-9 Please select backup project file dialog box
Step 3 Select the backup file of the project, and click Open.
The program restores the selected project with the backup file.
----End
3.1.5 Restoring a Project as a New Project
To restore a project as a new project, perform the following steps:
Step 1 Ensure that no project is selected in the Manage WCDMA Projects dialog box, as shown in
Figure 3-7.
Step 2 Click Restore.
The Restore Project dialog box is displayed, as shown in Figure 3-10.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 29
Figure 3-10 Restore Project dialog box
Step 3 Input the name for the project to be restored.
Step 4 Select a backup project file for restoring the project.
Step 5 Select a path for saving the project.
Step 6 Click OK.
----End
3.1.6 Deleting a Project
To delete a project, perform the following steps:
Step 1 Select a project in the Manage WCDMA Projects dialog box, as shown in Figure 3-7.
Step 2 Click Delete.
The selected project is removed from the Project List in the Manage WCDMA Projects
dialog box.
----End
NOTE Ensure the project is not in use before you delete it. Otherwise the project cannot be deleted.
3.2 Managing a Task
3.2.1 Introducing the Task States
The task has five states, as described in Table 3-3.
Tables
GENEX Nastar WCDMA Transdata
User Manual
30 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Table 3-3 Task states
Task States Description
Unedited state.
Stopped state.
It means that the task is completed, or is stopped by user.
Executing state.
It means the data are in the process of importing or deleting.
Ready state.
It means the task is ready for processing.
Waiting state.
3.2.2 Editing the Data Import Task
Take the task of importing the configuration data for instance, the other tasks are similar.
To edit the task of importing the configuration data, perform the following steps:
Step 1 Select Config Data Import in the task pane, and select Edit Task on the shortcut menu, as
shown in Figure 3-11.
Figure 3-11 Edit Task on the shortcut menu
The Data Import Task Setting dialog box is displayed, as shown in Figure 3-12.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 31
Figure 3-12 Data Import Task Setting dialog box—Configuration Data
Table 3-4 describes the elements in the Data Import Task Setting dialog box
Table 3-4 Descriptions of the data Import Task Setting dialog box
Element Description
Basic Task Name The name of the task.
Data Path Select the directory of the file to be imported.
Execute At Once Execute the task at once.
If you import the data manually, select this
option.
Execute As Plan Execute the task according the plan set in the
Trigger Time field.
You can set Begin Time and Granularity in the
Trigger Time field.
And only when Active Task is selected, the task
can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
32 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Trigger Time Begin Time Set the begin time to import data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to import data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Data Process Do not process Do not to process data file after the data is
imported.
Delete all data
files after
importing
Delete all data files after the data is imported.
After import,
move date files to Click to select a path.
Move the data file to the selected directory after
the data is imported.
Step 2 Edit each element in the Data Import Task Setting dialog box, as described in Table 3-4.
Step 3 Click OK.
----End
3.2.3 Editing the Data Delete Task
Take the task of deleting the configuration data for instance, the other tasks are similar.
To edit the task of deleting the configuration data, perform the following steps:
Step 1 Select Config Data Delete in task pane, and select Edit Task on the shortcut menu, as shown
in Figure 3-13.
Figure 3-13 Edit Task on the shortcut menu
The Data Delete Task Setting dialog box is displayed, as shown in Figure 3-14.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 33
Figure 3-14 Data Delete Task Setting dialog box
Table 3-5 describes the elements in the Data Delete Task Setting dialog box.
Table 3-5 Descriptions of the Data Delete Task Setting dialog box
Element Description
Basic Task Name The name of the task.
The default name is CHR Data Delete.
Execute At Once Execute the task at once.
To delete the data manually, select this option.
Trigger Time Task Name The name of the task.
The default name is Config Data Delete.
Execute As Plan Execute the task according to the plan.
And only when Active Task is selected, the
task can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
34 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Original Data
Reserved
Set the days of original data reserved.
It is available only when Execute As Plan is
selected.
Begin Time Set the begin time to delete the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to delete data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Step 2 Edit each element on the Data Delete Task Setting dialog box, as described in
Step 3 Click OK.
----End
3.2.4 Starting a Task
To start a task, select the task, and then select Start Task on the shortcut menu.
3.2.5 Stopping a Task
You can stop a task that is in the executing state, waiting state or ready state.
To stop a task, select the task, and then select Stop Task on the shortcut menu.
All the stopped-by-manual period tasks will be loaded when transdata restart.
To stop the period task permanently , following step will change status to “Unedited state”.
Step1: Right click currnet task->Choose Edit Task
Step2: Uncheck “Active Task” option. Then click “OK”.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 35
Step3: Finish. Task status changed to Unedited state.
3.2.6 Moving a Task
You can move tasks that are in the waiting state to change the order of the task. But you
cannot move tasks while the tasks are in the other states.
----End
Tables
GENEX Nastar WCDMA Transdata
User Manual
36 Huawei Technologies Proprietary Issue 04 (2009-03-02)
4 Managing the Data
About This Chapter
The following table lists the contents of this chapter.
Section Describes
4.1 Importing the Project
Parameters
Describe how to import project parameters.
4.2 Deleting the Project
Parameters
Describe how to delete project parameters.
4.3 Mananaging Data Describe how to import or delete data.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 37
4.1 Importing the Project Parameters
To import the project parameters, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the Project Parameter Import in
the task pane.
Step 2 Select Execute on the shortcut menu.
Choose Execute, as shown in Figure 4-1.
Figure 4-1 Import Engineering Parameter on the shortcut menu
The Open dialog box is displayed, as shown in Figure 4-2.
Figure 4-2 Open dialog box
Step 3 Select the project file, and click Open.
The Select Excel Sheet dialog box is displayed, as shown in Figure 4-3.
Tables
GENEX Nastar WCDMA Transdata
User Manual
38 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 4-3 Select Excel Sheet dialog box
Step 4 Select the project parameter sheet, and click OK.
The Project Parameter Import Setting dialog box is displayed, as shown in Figure 4-4.
Figure 4-4 Project Parameter Import Setting dialog box
The project parameters are matched automatically. That the sign√in front of a column name
means the name has been matched with a certain column and cannot be used to match with
the next column.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 39
You can also match it manually.
Click the table column header and select the matched column name in the drop-down
list.
To cancel the match of a column, select Release Match on the shortcut menu.
Step 5 After the match finishes, click OK to import data.
If error occurs during importing project parameter, a report for recording the errors is
generated.
NOTE It is suggested to select Clear Database to clear database before importing the project parameter. In this
way, you can avoid the errors appears during importing the project parameter.
----End
4.2 Deleting the Project Parameters
To delete the project parameters for a project, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the Project parameter Delete in
the task pane.
Step 2 Select Execute on the shortcut menu.
The Delete Engineering Parameter dialog box is displayed, as shown in Figure 4-5.
Figure 4-5 Delete Engineering Parameter dialog box
Step 3 Click Yes.
The confirmation dialog is displayed, as shown in Figure 4-6.
Figure 4-6 Delete Engineering Parameter dialog box
Step 4 Click Yes.
Tables
GENEX Nastar WCDMA Transdata
User Manual
40 Huawei Technologies Proprietary Issue 04 (2009-03-02)
The Transdata begins to delete the project parameters. After the project parameters are deleted
successfully. The system prompts a message in the Output pane, as shown in Figure 4-7.
Figure 4-7 Message in the Output pane
----End
4.3 Mananaging Data
4.3.1 Importing the Configuration Parameters
To import the configuration parameters, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the Config Data Import in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Import Task Setting dialog box is displayed, as shown in Figure 4-8.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 41
Figure 4-8 Data Import Task Setting dialog box—Config Data Delete
Table 4-1 describes the elements in the Data Import Task Setting dialog box.
Table 4-1 Descriptions of the Data Import Task Setting dialog box
Element Description
Basic Task Name The name of the task.
The default name is Config Data Import.
Data Path Select the directory of the file to be imported.
Execute At Once Execute the task at once.
If you import the data manually, select this
option.
Execute As Plan Execute the task according the plan set in the
Trigger Time field.
You can set Begin Time and Granularity in the
Trigger Time field. And only when Active Task
is selected, the task can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
42 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Trigger Time Begin Time Set the begin time to import data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to import data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Data Process Do not process Do not to process data file after the data is
imported.
Delete all data
files after
importing
Delete all data files after the data is imported.
After import,
move date files to Click to select a path.
Move the data file to the selected directory after
the data is imported.
Step 3 Type task name, and select the directory of the file to be imported.
Step 4 Select task execution type.
Select Execute At Once to import the data manually.
Select Execute As Plan to import the data automatically, and set Begin Time and
Granularity in Trigger Time.
Step 5 Select data process type.
Step 6 Click OK.
----End
4.3.2 Deleting a Configuration Parameter Data
To delete a configuration data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the Config Data Delete in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Delete Task Setting dialog box is displayed, as shown in Figure 4-9.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 43
Figure 4-9 Data Delete Task Setting—Config Data Delete
Table 4-2 describes the elements in the Data Delete Task Setting dialog box.
Table 4-2 Descriptions of the Data Delete Task Setting dialog box.
Element Description
Manual Execute At Once Execute the task at once.
To delete the data manually, select this option.
Data List Lists the MML files that you imported before.
Task Run Task Name The name of the task.
The default name is Config Data Delete.
Execute As Plan Execute the task according to the plan.
And only when Active Task is selected, the task
can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
44 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Original Data
Reserved
Set the days of original data reserved.
It is available only when Execute As Plan is
selected.
Begin Time Set the begin time to delete the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to delete data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Step 3 Set the elements in the Data Delete Task Setting dialog box, according to the descriptions in
the Table 4-2.
Step 4 Click OK.
----End
4.3.3 Importing a Performance Data
To import a performance data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the Performance Data Import in
the task pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Import Task Setting dialog box is displayed, as shown in Figure 4-10.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 45
Figure 4-10 Data Import Task Setting dialog box—Performance Data Import
Table 4-3 describes the elements in the Data Import Task Setting dialog box.
Table 4-3 Descriptions of the Data Import Task Setting dialog box
Element Description
Basic Task Name The name of the task.
The default name is Performance Data Import.
Data Path Select the directory of the file to be imported.
Item set Select item set to be queried from the Item set
drop-down list.
Tables
GENEX Nastar WCDMA Transdata
User Manual
46 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Execute At Once Execute the task at once.
If you manually import the data, select this
option.
Execute As Plan Execute the task according the plan set in the
Trigger Time field.
You can set Begin Time and Granularity in the
Trigger Time field. And only when Active Task
is selected, the task can be executed.
Trigger Time Begin Time Set the begin time to import data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to import data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Import File
Time Set
Use Time Filter Only when Use Time Filter is selected. Start
Time and End Time in Import File Time Set
field are available.
Start Time Set the start time for filtering.
End Time Set the end time for filtering.
Data Process Do not process Do not to process data file after the data is
imported.
Delete all data
files after
importing
Delete all data files after the data is imported.
After import,
move date files to Click to select a path.
Move the data file to the selected directory after
the data is imported.
Step 3 Type the task name, and select the directory of the file to be imported.
Step 4 Select the task execution type.
Select Execute At Once to import the data manually.
Select Execute As Plan to import the data automatically, and set Begin Time and
Granularity in Trigger Time.
Step 5 Set the filter time.
Step 6 Select the data process type.
Step 7 Click OK.
----End
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 47
After the performance data is imported, select Performance Data node of a project in the
Project View pane, and then select Query on the shortcut menu. The Query Result dialog
box is displayed, as shown in Figure 4-11. The imported data is listed in the Query Result
dialog box.
Figure 4-11 Query Result dialog box
4.3.4 Deleting a Performance Data
To delete a performance data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the Performance Data Delete in
the task pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Delete Task Setting dialog box is displayed, as shown in Figure 4-12.
Tables
GENEX Nastar WCDMA Transdata
User Manual
48 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 4-12 Data Delete Task Setting dialog box—Performance Data Delete
Table 4-4 describes the elements in the Data Delete Task Setting dialog box.
Table 4-4 Descriptions of the Data Delete Task Setting dialog box
Element Description
Manual Run Execute At Once Execute the task at once.
To delete the data manually, select this option.
Delete Statistic
Data at the same
time
If Delete Statistic Data at the same time is
selected, the statistic data is deleted at the same
time.
This option is available only when Execute As
Once is selected.
Data List Lists the existing RNC.
Begin Date Set the begin date of the performance to delete.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 49
Element Description
End Date Set the end date of the performance to delete.
Task Run Task Name The name of the task.
The default name is Performance Data Delete.
Execute As Plan Execute the task according to the plan.
And only when Active Task is selected, the task
can be executed.
Original Data
Reserved Days
The days to reserve the original data after it is
deleted.
It is available only when Execute As Plan is
selected.
Statistic Data
Reserved Days
The days to reserve the statistic data after it is
deleted.
It is available only when Execute As Plan is
selected.
Begin Time Set the begin time to delete the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to delete data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Step 3 Set the elements in the Data Delete Task Setting dialog box, according to the descriptions in
the Table 4-4.
Step 4 Click OK.
----End
4.3.5 Importing a CHR Data
To import a CHR data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the CHR Data Import in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Import Task Setting dialog box is displayed, as shown in Figure 4-13.
Tables
GENEX Nastar WCDMA Transdata
User Manual
50 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 4-13 Data Import Task Setting dialog box—CHR Data Import
Table 4-5 describes the elements in the Data Import Task Setting dialog box.
Table 4-5 Descriptions of the Data Import Task Setting dialog box
Element Description
Basic Task Name The name of the task.
The default name is CHR Data Import.
Data Path Select the directory of the file to be imported.
Data Version Displays the current data version information.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 51
Element Description
Execute At Once Execute the task at once.
If you manually import the data, select this
option.
Execute As Plan Execute the task according the plan set in the
Trigger Time field.
You can set Begin Time and Granularity in the
Trigger Time field. And only when Active Task
is selected, the task can be executed.
Set CHR Import
Condition Click to open Set CHR
Import Condition dialog box, as shown in
Figure 4-14.
Select contents to be imported, and click OK.
When you import CHR data, only the selected
contents are imported.
Trigger Time Begin Time Set the begin time to import the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to import the data in interval
after the begin time.
It is available only when Execute As Plan is
selected.
Import File
Time Set
Use Time Filter Only when Use Time Filter is selected, Start
Time and End Time in Import File Time Set
field are available.
If Use Time Filter is not selected, all data of the
data file are imported by default.
Start Time Set the start time for filtering.
End Time Set the end time for filtering.
Data Process Do not process Do not to process data file after the data is
imported.
Delete all data
files after
importing
Delete all data files after the data is imported.
After import,
move date files to Click to select a path.
Move the data file to the selected directory after
the data is imported.
Tables
GENEX Nastar WCDMA Transdata
User Manual
52 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Figure 4-14 Set CHR Import Condition dialog box
Step 3 Type the task name, and select the directory of the file to be imported.
Step 4 Select the task execution type.
Select Execute At Once to import the data manually.
Select Execute As Plan to import the data automatically, and set Begin Time and
Granularity in Trigger Time.
Step 5 Select the contents of the CHR data to be imported on the Set CHR Import Condition dialog
box.
Step 6 Set the filter time.
Step 7 Select the data process type.
Step 8 Click OK.
----End
4.3.6 Deleting a CHR Data
To delete a CHR data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the CHR Data Import in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 53
The Data Delete Task Setting dialog box is displayed, as shown in Figure 4-15.
Figure 4-15 Data Delete Task Setting dialog box —CHR Data Delete
Table 4-6 Descriptions of the Data Delete Task Setting dialog box—CHR Data Delete
Element Description
Manual
Execute At Once Execute the task at once.
To delete the data manually, select this option.
Data List Lists the existing CHR database.
Task Run Task Name The name of the task.
The default name is CHR Data Delete.
Execute As Plan Execute the task according to the plan.
And only when Active Task is selected, the task
can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
54 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Original Data
Reserved
The days to reserve the CHR data after it is
deleted.
It is available only when Execute As Plan is
selected.
Begin Time Set the begin time to delete the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to delete data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Step 3 Type the task name and select CHR data to delete.
Step 4 Click OK.
----End
4.3.7 Importing an IOS Data
To import an IOS data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the IOS Data Import in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Import Task Setting dialog box is displayed, as shown in Figure 4-16.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 55
Figure 4-16 Data Import Task Setting dialog box—IOS Data Import
Table 4-7 describes the elements in the Data Import Task Setting dialog box.
Table 4-7 Descriptions of the Data Import Task Setting dialog box
Element Description
Basic Task Name The name of the task.
The default name is IOS Data Import.
Data Path Select the directory of the file to be imported.
Execute At Once Execute the task at once.
If you manually import the data, select this
option.
Execute As Plan Execute the task according the plan set in the
Trigger Time field.
You can set Begin Time and Granularity in the
Trigger Time field. And only when Active Task
is selected, the task can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
56 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Trigger Time Begin Time Set the begin time to import the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to import the data in interval
after the begin time.
It is available only when Execute As Plan is
selected.
Data Process Do not process Do not to process data file after the data is
imported.
Delete all data
files after
importing
Delete all data files after the data is imported.
After import,
move date files to Click to select a path.
Move the data file to the selected directory after
the data is imported.
Step 3 Type task name, and select the directory of the file to be imported.
Step 4 Select task execution type.
Select Execute At Once to import the data manually.
Select Execute As Plan to import the data automatically, and set Begin Time and
Granularity in Trigger Time.
Step 5 Select data process type.
Step 6 Click OK.
----End
4.3.8 Deleting an IOS Data
To delete an IOS data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the IOS Data Delete in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Delete Task Setting dialog box is displayed, as shown in Figure 4-17.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 57
Figure 4-17 Data Delete Task Setting dialog box—IOS Data Delete
Table 4-8 describes the elements in the Data Delete Task Setting dialog box.
Table 4-8 Descriptions of the Data Delete Task Setting dialog box
Element Description
Manual
Execute At Once Execute the task at once.
To delete the data manually, select this option.
All Click to select all IOS data.
None Click to select none of the IOS data.
Reverse Click to select the IOS data reversely.
Data List Lists the existing IOS data.
Task Run Execute As Plan Execute the task according to the plan.
And only when Active Task is selected, the task
can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
58 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
Task Name The name of the task.
The default name is IOS Data Delete.
Original Data
Reserved
The days to reserve the IOS data after it is
deleted.
It is available only when Execute As Plan is
selected.
Begin Time Set the begin time to delete the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to delete data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Step 3 Set the elements in the Data Delete Task Setting dialog box, according to the descriptions in
the Table 4-8.
Step 4 Click OK.
----End
4.3.9 Importing a RTWP Data
RTWP data includes the following two formats:
Binary format
Text format
Importing the RTWP Data Binary format
To import the RTWP data in binary format, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the RTWP Data Import in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Import Task Setting dialog box is displayed, as shown in Figure 4-18.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 59
Figure 4-18 Data Import Task Setting dialog box—RTWP Data Import
Table 4-9 describes the elements in the Data Import Task Setting dialog box.
Table 4-9 Descriptions of the Data Import Task Setting dialog box
Element Description
Basic Task Name The name of the task.
The default name is RTWP Data Import.
Data Path Select the directory of the file to be imported.
Execute At Once Execute the task at once.
If you manually import the data, select this
option.
Execute As Plan Execute the task according the plan set in the
Trigger Time field.
You can set Begin Time and Granularity in the
Trigger Time field. And only when Active Task
is selected, the task can be executed.
Tables
GENEX Nastar WCDMA Transdata
User Manual
60 Huawei Technologies Proprietary Issue 04 (2009-03-02)
Element Description
TxtFile Set
(RNCID and
CelllID)
Set the RNC ID and Cell ID that the imported
RTWP data of .txt format belongs to.
Only when the imported data is .txt format, this
field is available.
Trigger Time Begin Time Set the begin time to import the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to import data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Data Process Do not process Do not to process data file after the data is
imported.
Delete all data
files after
importing
Delete all data files after the data is imported.
After import,
move date files to Click to select a path.
Move the data file to the selected directory after
the data is imported.
Step 3 Type the task name, and select the directory of the data to be imported.
Step 4 Select the task execution type.
Select Execute At Once to import the data manually.
Select Execute As Plan to import the data automatically, and set Begin Time and
Granularity in Trigger Time.
Step 5 Select the data process type after import setting finishes.
Step 6 Click OK.
----End
Importing the RTWP Data in Text format
To import the RTWP data in text format, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the RTWP Data Import in the task
pane.
The Data Import Task Setting dialog box is displayed, as shown in Figure 4-18.
Step 2 Type the task name, and select the directory of the data to be imported.
Step 3 Select the task execution type.
Select Execute At Once to import the data manually.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 61
Select Execute As Plan to import the data automatically, and set Begin Time and
Granularity in Trigger Time.
Step 4 Click Enter Set Form on the Data Import Task Setting dialog box.
The RTWP TXT File Information dialog box is displayed, as shown Figure 4-19.
Figure 4-19 RTWP TXT File Information dialog box
Table 4-10 describes the elements in the RTWP TXT File Information dialog box.
Table 4-10 RTWP TXT File Information dialog box
Element Description
ROWID Row ID.
RNCID RNC ID.
Click to input the RNC ID.
CELLID Cell ID.
Click to input the cell ID.
FILE PATH Display the directory and name of the data file.
Step 5 Input RNC ID and cell ID, click OK in the RTWP TXT File Information dialog box.
Step 6 Select the data process type after data file setting finishes.
Step 7 Click OK.
Return to the RTWP TXT File Information dialog box.
Step 8 Click OK to confirm.
----End
Tables
GENEX Nastar WCDMA Transdata
User Manual
62 Huawei Technologies Proprietary Issue 04 (2009-03-02)
4.3.10 Deleting a RTWP Data
To delete a RTWP data, perform the following steps:
Step 1 Select a project in the Project View pane, and then select the RTWP Data Delete in the task
pane.
Step 2 Select Edit Task on the shortcut menu.
The Data Delete Task Setting dialog box is displayed, as shown in Figure 4-20.
Figure 4-20 Data Delete Task Setting dialog box—RTWP Data Delete
Table 4-11 describes the elements in the Data Delete Task Setting dialog box.
Table 4-11 Descriptions of the Data Delete Task Setting dialog box
Element Description
Manual
Execute At Once Execute the task at once.
To delete the data manually, select this option.
GENEX Nastar WCDMA Transdata
User Manual Tables
Issue 04 (2009-03-02) Huawei Technologies Proprietary 63
Element Description
All Click to select all RTWP data.
None Click to select none of the RTWP data.
Reverse Click to select the RTWP data reversely.
Data List Lists the existing RTWP data.
Task Run Execute As Plan Execute the task according to the plan.
And only when Active Task is selected, the task
can be executed.
Task Name The name of the task.
The default name is RTWP Data Delete.
Data Reserved
Days
The days to reserve the RTWP data after it is
deleted.
It is available only when Execute As Plan is
selected.
Begin Time Set the begin time to delete the data.
It is available only when Execute As Plan is
selected.
Granularity Set Granularity to delete data in interval after
the begin time.
It is available only when Execute As Plan is
selected.
Step 3 Set the elements in the Data Delete Task Setting dialog box, according to the descriptions in
the Table 4-11.
Step 4 Click OK.
4.3.11 About Importing and Deleting Data As Plan
The granularity for importing and deleteting data as plan cannot be set both too short such as
several minutes. If delete and insert data frequently, it would cause exception in Microsoft SQL
2000 and cannot restore automatically exception restart server. Generally, set the granularity for
deleteting data as 24 hours or longer is safety.
----End