Accessible Systems, Inc | 866-938-4608 | www.adjustasink.com

1

GENERAL INFORMATION WITH SPECIFICATIONS

For Photos of Our Product, Drawings, Installation Instructions – Please visit our website: www.adjustasink.com

The Adjust-a-Sink® is made in the USA and comes complete with: • Comfort Fit #3050 Solid Surface Shampoo Bowl is standard

- Complete with #550 Faucet, #1729 Standard Vacuum Breaker and Spray Hose with Nozzle • Basket strainer for shampoo bowl (supplied by Accessible Systems Inc.) • Durable Painted Steel Drain Shroud • Hot & cold water supply lines (1/2” FIP to 3/8” comp)

- Please note, we do not supply the hot and cold shut off valves

• Patent Pending Hard Telescoping Plumbing

- Please note, we do not supply the 1 ½” “P” trap

• Easy-to-Use Hydraulic Pump – made in the USA – 5 Year Warranty • 2 year warranty on all other parts and workmanship • Backboard & backsplash of Wilsonart laminate which is available in 3 standard colors: - Frosty White - Natural Almond – Black

GENERAL PRODUCT INFORMATION

• The “Adjust-a-Sink”® System elevates the shampoo bowl a total of 12” vertically. • Height distance from the floor to the front/top of the bowl ranges from 34” to 46” • The basic dimensions of a unit in the “down” position are: 22” Wide, 27” Deep, and 36” High (to the

top of the backsplash). • A self-contained maintenance free foot operated hydraulic pump provides the lift capacity needed to

raise the shampoo bowl. The hydraulic pump’s foot pedal is free to rotate approximately 90 degrees to the side anytime the operator requires.

• Components are manufactured from stainless steel, aluminum and coated steel. The design of the unit has proven to provide years of trouble-free service when properly cleaned and maintained.

LEAD-TIME: 3 weeks for standard colors - 4 weeks for special color laminate & bowl choices

PAYMENT METHODS: Credit Card, Check in Advance.

Model K100 Is A cUPC Listed System, File #5496* *Using Comfort Fit #3050 Bowl

Model K100-V comes with cUPC Listed Drain, File #5496

2

ADJUST-A-SINK® CONFIGURATIONS Prices subject to change without notice.

K100 with our patent pending 3-Stage telescoping plumbing, Comfort Fit #3050 bowl, 550 fixture, 1729 vacuum breaker, spray hose and strainer basket:

The Comfort Fit™ bowl is specifically designed to fit the spectrum of clients in a senior living setting. The bowl shape is optimized to allow close up fit to short statured residents in small size wheelchairs, and also has a v-shaped neck opening that can accommodate larger neck sizes. The neck rest section has a continuous diameter lip so no matter what angle the resident’s head is positioned, there is no edge to create a pressure point.

K100-V with our patent pending 3-Stage telescoping plumbing, Belvedere 8400K bowl, 522 faucet, 402 vacuum breaker, spray hose and strainer basket:

PLUMBING: The drain system is a rigid, telescopic tail pipe that is cUPC Listed. This patent pending drain allows our sink to adjust and is code compliant.

3-Stage Plumbing (K100) can accommodate waste drain heights of up to 19” from the floor depending upon its use with a hair interceptor (see our drawing # K100-87) OPTIONS AND ADDITIONAL INSTALLATION ITEMS:

• #800 3 in 1 Faucet** (Faucet/VB/Spray Nozzle for use w/ Comfort Fit or MP Bowls Only) • Stainless Steel Shroud • 1707 Catch All Hair Trap – Polyethylene, cUPC listed • 8750 Cl JR Smith Hair Interceptor – Cast Iron, cUPC listed • 8750 JR Smith Hair Interceptor – Chrome, cUPC listed • ASSE 1070 Mixing Valve Kit • Special Color Laminate, Standard Line (provide manufacturers name & color #) • Special Bowl Finish (for Belvedere or MP Bowls): Mica or Granite Finish

**Complies with ASME Standard A112.18.1 – This Meets Code Requirements in Wisconsin and California

Specifications subject to change without notice. Adjust-a-Sink® is a registered trademark of Accessible Systems®, Inc.

Accessible Systems, Inc | 866-938-4608 | www.adjustasink.com

3

K100 in standard BLACK: -Black Comfort Fit Bowl -Wilsonart 1595-60 black -Black painted Shroud

K100 in standard BLACK: -Black Comfort Fit Bowl -Wilsonart 1595-60 black -Stainless Steel Shroud upgrade

K100 in standard WHITE: -White Comfort Fit Bowl -Wilsonart 1573-60 frosty white -White painted Shroud

K100 in std ALMOND: -Almond Comfort Fit Bowl -Wilsonart D30-60 natural almond -Almond painted Shroud

Figure 1, Photos and colors for K100 standard configurations with Comfort Fit bowls

550 fixture set for K100 Includes ASSE 1001 vacuum breaker

800 fixture for K100 Includes ASME A112.18.1 backflow preventer

Figure 2, Photos of fixture choices for #Comfort Fit 3050 Bowls

K100-V standard WHITE: -PE733 White Belvedere Bowl -Wilsonart 1573-60 frosty white laminate -White painted shroud

Belvedere 522 fixture set Includes ASSE 1001 vacuum breaker

Figure 3, Photo of K100-V in white Belvedere bowl and fixture choice for Belvedere Bowls

4

INFORMATION NEEDED ON YOUR ORDER – Order Checklist: □ K100 □ Comfort Fit □ Marble Products □ K100-V Belvedere

Model Selection – K100 comes with a Comfort Fit #3050 Solid Surface Bowl (standard) or Marble Products 3000W Cultured Marble Bowl (by request). K100-V comes with a Belvedere 8400K Cast Iron Porcelain Bowl

Color: ________________

Color Choices for Bowls - There are 5 color choices for Comfort Fit bowls and 16 choices for the Marble Products bowls (K100 model) and 32 choices for Belvedere bowls (K100-V model). Please see the color chart on page 5. No additional charge for standard colors, up-charge for, Granite Finish and Mica bowls. WHITE, ALMOND, and BLACK colors ship the quickest.

□ 550 □ 800 □ 522

Fixture choice for K100 – Comfort Fit and Marble Products bowls are available with 550 fixture set (single lever valve with whiz sprayer on the opposite corner of the bowl, or 800 fixture which is a one-piece design with pull out spray head. Fixture Choice for K100V - Belvedere 8400K bowls are available with a 522 Fixture and 403 Vacuum Breaker Set NOTE: Special vacuum breakers are required in CA and WI. The #800 3-in1 faucet option provides a vacuum breaker that meets CA and WI codes.

Laminate □ Black □ White □ Almond □ custom: Mfr______________ Color____________

Color Choice for Laminate - Stock laminate colors included in the base price are: WHITE (Wilsonart 1573-60), ALMOND (Wilsonart D30-60), BLACK (Wilsonart 1595-60) If requesting a special laminate color, we will need the manufacturer’s name and color code number. There will be a modest up charge for Standard Line laminate custom color choices, Designer Line options may be higher, please call for a quote. Standard Line laminate choices include the majority of Wilsonart or Formica laminates, excluding the Wilsonart HD and Formica FX series laminates, call for quote on these.

□ Horizontal grain □ Vertical grain

Grain orientation for Custom Laminate – if a custom laminate selection has a texture or grain pattern, indicate the orientation of the grain to be applied, horizontal or vertical.

□ Black □ White □ Almond □ SS

Color choice for Painted Steel Drain Shroud – choice of WHITE-ALMOND-BLACK painted shroud is included in the base price. A Stainless Steel Shroud is available for an up charge.

QTY___________ Number of units being ordered.

□ 1701 plastic trap □ 8750 Cast Iron trap □ 8750 Chrome trap

Are you using a hair interceptor/trap? Please note we offer two (3) choices of hair interceptors/traps - see price list.

□ 1070 mixing valve Are you required to have an anti-scald mixing valve? We offer a kit with ASSE 1070 valve that can be installed on the mounting panel – see price list.

Name of contact person with phone and fax numbers.

Address where is unit being shipped.

Address where is unit being installed.

Accessible Systems, Inc | 866-938-4608 | www.adjustasink.com

5

6

AVAILABLE WET STATION CABINETS

All cabinets are compatible with the K100 and K100-V systems, some are shown here with fixed bowls.

There are eight available colors at the base price level, but any special order laminate can be applied.

5515-48-4 5515-66-4 4421-42 4421-60 Adjust-a-Sink Adjust-a-Sink Extra Neo Erie Neo Huron Shaker Cherry Shaker Cherry Cafelle Maple 39” H x 48”W x 16” D 78” H x 66”W x 16” D 42” H x 42”W x 16” D 42” H x 60”W x 16” D

4423-60 4424-60 4422-60 Neo Ontario Neo Superior Neo Michigan Cafelle Maple Shaker Cherry 80” H x 60”W x 16” D 80” H x 60”W x 16” D 42” H x 60”W x 16” D

879-48 Bradford Cherry

75” H x 48”W x 16” D

C SCHEFF

5

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ACCESSIBLE SYSTEMS, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ACCESSIBLE SYSTEMS, INC IS PROHIBITED.

ROUGH-IN FOR

4

PLUMBING

DO NOT SCALE DRAWING

K100-87SHEET 1 OF 1

4/17/08

G

5-3-10

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:8 WEIGHT:

REVDWG. NO.

ASIZE

TITLE:

Accessible Systems, Inc.NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

THREE PLACE DECIMAL

BEND

FINISH

3

NEXT ASSY

TWO PLACE DECIMAL

MATERIAL

PROPRIETARY AND CONFIDENTIALINTERPRET GEOMETRIC

USED ON

2

APPLICATION

K100 3-STAGETOLERANCING PER:

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: MACH

1

FINISHEDFLOOR(REF)

"WASTE DRAIN

STUBOUT

8

(REF)

4"WATER SUPPLY

STUBOUT(REF)

FOR WATER SUPPLYCLEARANCE HOLES

7/8

LINES

A

2-1/2

2211

B

334-1/8

2x

2-1/4CLEARANCE HOLEFOR WASTE DRAIN

PIPE

NOTE: FOR USE WITH COMFORT FIT #3050 SHAMPOO BOWL WITH OR WITHOUT HAIR INTERCEPTOR

Waste Drain and Water Supply Configurations

Description Drain Type Dimension A Min

Dimension A Max

Dimension B Min

Dimension B Max

"Rough In" New construction or remodel

Standard with or without Hair Trap 10" 10" 19"

NOTE:1)REFERENCE THE TABLE FOR THEAPPROPRIATE WATER SUPPLY AND DRAINDIMENSIONS.

2)THE DENOTED DIMENSIONS ARE CRITICALLOCATIONS FOR THE PIPES PASSING THROUGHTHE MOUNTING PANEL. ENSURE ALL PIPESPASSING THROUGH FALL WITHIN THESEDIMENSIONS.

19"

Dimension B Min

Dimension B Max

Without Mixing Valve Kit WITH Mixing Valve Kit

3" 9"

REV: 7/1/16

3436

22

48

46

12

27

SHEET 1 OF 3

K100

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2

Multi-Stage SystemINTERPRET GEOMETRIC

C. Schef f

A2

UNLESS OTHERWISE SPECIFIED:

PROPRIETARY AND CONFIDENTIAL

NEXT ASSY USED ON

SCALE: 1:12 WEIGHT:

REV

10/15/07

DWG. NO.

1

BAPPL ICAT ION

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFACCESSIBLE SYSTEMS ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OFACCESSIBLE SYSTEMS IS PROHIBITED.

T H R E E P L A C E D E C I M A L

TOLERANCING PER:

MATERIAL

FINISH

D R A W N

C H E C K E D

E N G A P P R .

M F G A P P R .

Q . A .

C O M M E N T S :

DATEN A M E Accessible Systems, Inc.TITLE:

SIZE

D I M E N S I O N S A R E I N I N C H E ST O L E R A N C E S :F R A C T I O N A LA N G U L A R : M A C H B E N D T W O P L A C E D E C I M A L Adjust-a-Sink

D O N O T S C A L E D R A W I N G

16 typ

36

34

22.5 min

6.0 maximum

SHEET 2 OF 3

K100

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2

Multi-Stage SystemINTERPRET GEOMETRIC

C. Schef f

A2

UNLESS OTHERWISE SPECIFIED:

PROPRIETARY AND CONFIDENTIAL

NEXT ASSY USED ON

SCALE: 1:12 WEIGHT:

REV

10/15/07

DWG. NO.

1

BAPPL ICAT ION

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFACCESSIBLE SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OFACCESSIBLE SYSTEMS IS PROHIBITED.

T H R E E P L A C E D E C I M A L

TOLERANCING PER:

MATERIAL

FINISH

D R A W N

C H E C K E D

E N G A P P R .

M F G A P P R .

Q . A .

C O M M E N T S :

DATEN A M E Accessible Systems, Inc.TITLE:

SIZE

D I M E N S I O N S A R E I N I N C H E ST O L E R A N C E S :F R A C T I O N A LA N G U L A R : M A C H B E N D T W O P L A C E D E C I M A L Adjust-a-Sink

D O N O T S C A L E D R A W I N G

34

Reserve work space for stylist in salon plan. If multiple sinks are installed along the same wall, space at 54" or greater on center

Preferred work sideAlternate work side, This side of sink may be closer to wall or obstacles if preferred side space is reserved.

The Adjust-a-Sink may bemounted flush to a wall or front face of cabinets. The unit may also be set back from the cabinet face by a maximum of 6" as shown, to allow for work access

Cabinet with recessed area for sink mounting

6

0.75

The adjustable backsplashrequires adequate clearance tolift, add spacer blocks or panelsbehind mounting panel iftrimwork, countertop lip, orother element protrudes morethan 0.5"

Stylist Work SpaceStylist Work Space

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFACCESSIBLE SYSTEMS INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OFACCESSIBLE SYSTEMS INC IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

NEXT ASSY USED ON

APPL ICAT ION

D I M E N S I O N S A R E I N I N C H E ST O L E R A N C E S :F R A C T I O N A LA N G U L A R : M A C H B E N D T W O P L A C E D E C I M A L

T H R E E P L A C E D E C I M A L

INTERPRET GEOMETRICTOLERANCING PER:

MATERIAL

FINISH

D R A W N

C H E C K E D

E N G A P P R .

M F G A P P R .

Q . A .

C O M M E N T S :

DATEN A M E Accessible Systems, Inc.TITLE:

SIZE

BDWG. NO. REV

WEIGHT:SCALE: 1:12

UNLESS OTHERWISE SPECIFIED:

A2

C. Schef f 10/15/07

Adjust-a-SinkMulti-Stage System

SHEET 3 OF 3

K100D O N O T S C A L E D R A W I N G

917

1615

3

2

19

21

22 20

1

18

1413

10

11

7

6

4

125

8

23

ITEM NO. PART NUMBER DESCRIPTION QTY.1 K100-34 Hydraulic Lift System 12 K100-37 Retainer Ring 13 K100-38 Base Plate 14 K100-60 Lift Bracket 15 K100-61 Left Lift Shaft 16 K100-63 Lift Panel 17 K100-64 Back Splash 18 K100-65 Lift Panel Spacer 89 k100-68 Shroud 110 K100-85 Wall Mounting Panel 111 K100-70 Lift Guide 412 K100-71 Right Lift Shaft 113 K100-72 Drain Support Bracket 114 K100-73 Drain Clamp Bracket 115 K100-74 Floor Plate 116 K100-75 Multi-Stage System 1

17 K100-89 Shroud Guide 118 K100-92 Clamp Ring 219 #3050 Comfort Fit Shampoo Bowl 1

20 bowl mounting bracket Bowl Manufacturer's Bracket 1

21 basket Bowl Manufacturer's Basket 122 Vacuum Breaker Manufacturer's Vacuum Breaker 123 faucet Manufacturer's Faucet #550 1