GENERAL INDUSTRY SAFETY TEST

What does OSHA stand for?

1.Occupational Safety and Health Administration

2.Occupational Safety and Help Administration

3.Occupational Safety and Health Association

4.Occupational Safety Heart Association

What year was OSHA established?

1.19202.19503.19804.1970

When you have a company that has ____ or more employees you must maintain records of occupational injuries and illnesses.1.52.153.114.25

What is a PPE?

1.Personal Protective Equipment2.Personal Protective Evaluation3.Protective Protection for Employees4.Positive Person Evaluation

What does MSDS represent?

1.Material Data Safety Sheets2.Material Safety Data Sheets3.Miner Safety Dental Sheets4.None of the above

Top rails must be at least _______ inches off the road.

1.122.423.304.29

Floor openings larger than ______inches must be covered to prevent people from falling through the hole.

1.62.83.124.18

The distance between the wheel and adjustable grinder must never exceed ______ inches.

1.1/82.¼3.½4.¾

A qualified person is someone that is ______________involved.

1.Familiar with hazards2.Paid professional 3.Anyone 4.No one

A ___________________guard is a barrier, a permanent part on the machine, preferable to all other types of guards.

1.Interlocked2.Adjustable3.Self-adjusting4.Fixed

Which of the following could result in an accident?

1.Use of over-the-counter medication2.Lack of communication3.Poor work habits4.Inadequate training5.All of the above

Which behaviors can help reduce the chances of an accident to occur on a job?

1.Keeping the area free of debris2.Cleaning up spilled liquids3.Cleaning tools and equipment4.Labeling materials and supplies5.All of the above

Which muscles are the best to use to lift an object safely?

1.Arm muscles2.Back muscles3.Leg muscles4.Arm and back muscles

You need to get to the other side of a trench. What is the safest way to do it?

1.Walk around it2.Jump over it if no one is in it3.Step over it4.Place a board across it and use it as a bridge

Which of these documents should be available at all times to the workers on a job?

1.Material safety data sheets2.HAZCOM document3.OSHA Itinerary4.EPA Impact Statement

When you are going to step off a ladder onto a platform or a roof, how far should the top of the ladder extend above the point where the ladder contacts the structure?

1.At least 3 feet2.At least 2 feet3.At least 1 foot4.At least 6 inches

Select all of the choices that are true about electricity.

1.It can pass through the air for short distances.2.It cannot pass through the air.3.It can flow through the human body.4.It can only flow through various metals.

Which of the following could be a result from an electric accident?

1.Burns2.Explosions3.Fire4.Death5.All of the above

What is the best way to lift an object?

1.Keep your back bent and chin tucked in.2.Keep your back bent and both feet together.3.Keep your back straight and lift with your legs.4.Keep your back straight and your feet close together

All of the following devices are locked and tagged to protect workers from potential sources of energy

True or False1.Circuit breakers2.Switches3.Valves4.Hand tools

All of the following elements are needed at the same time in order for a fire to start EXCEPT

1.Carbon monoxide2.Fuel3.Oxygen4.Heat

The first face masks were made out of ______

1.Paper2.Wood3.Animal kidney4.Animal bladder

Worksite analysis

1.Identify the problem2.Cause the problem3.Analyze how the situation affects the worker4.Both a and c

How does OSHA help?

1.Drug screening2.Free food3.Training and Education4.None of the above

How must chemicals be labeled?

1.Identify of the chemical2.Appropriate hazard warnings3.Name and address of the responsible part4.All of the above

What do the letters GFCI represent?

1.Ground Fault Circuit Interrupter2.Ground Fault Interrupter3.Grounding Face Circuit Interrupter4.None of the above

A qualified person is someone that is ______________involved.

1.Familiar with the hazards2.Paid professional3.Anyone4.No one

A ____________________guard is a barrier-a permanent part of the machine, preferable to all other types of guards.

1.Interlocked2.Adjustable3.Self-adjusting4.Fixed

Employees subjected to electrical shock and burns are required to wear protective helmets.

TrueFalse

Exit signs, when required, shall be lettered in red letters, not less than 6 inches high.

TrueFalse

Caution signs shall be used only where an immediate hazard exists.

TrueFalse