general gx20/gp20 (/cm2 option) 6shfl¿fdwlrqv ......resume wireless communication. gm10 slaves...

7
GS 04L51B01-42EN GX20/GP20 (/CM2 option) GM (/CM2 and /CS2 options) 920MHz Wireless Communication OVERVIEW Wireless communication (902.1 to 927.9MHz band) enables the GX20(/CM2), GP20(/CM2), GM10(/CM2) to communicate as a master with compatible GM10 slaves (/CS2), UT52A/UT32A(suffix code type 3:B), and Wireless Input Unit (GX70SM), other Modbus devices and wireless communication sensors. Because slaves are equipped with a repeater function, they can be used to extend the communication distance. (This product can only be used in the US.) Even when wireless communication is cut off, the most suitable communication route is automatically selected. * Multi-hop GX20 (/CM2) GM10 (/CM2) Slave (GM10 (/CS2)) Slave (UTA52/UTA32) Slave (GM10 (/CS2)) Slave (GM10 (/CS2)) Master GP20 (/CM2) Sensor (GX70SM) Features • A single master can accommodate up to 100 slaves.*1 This is limited to 99 for the UT. • The output larger than that of conventional specified low power radio achieving a range of about 800 m*2 with a clear line-of-sight. • With multi-hop connection, even when wireless communication is cut off due to temporary deterioration in radio conditions, the most suitable communication route is automatically selected to resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance and improve radio quality. • Features of the 900 MHz band (compared to the 2.4 GHz band) • Because the radio frequency is low, radio signals attenuate less in the transmission route. • Because the radio frequency is low and the tendency to go straight is lower, the radio signals can more easily diffract around obstacles. • No license is required. *1 The number of units that can connected may be limited by the communication data size or the transmission interval. When used for low-speed moving bodies, the maximum number of routers is limited to 50 including repeaters. *2 The range depends on the operating environment. For the detailed specifications of the GX20, see the following general specifications. Material No.: GS 04L51B01-01EN For the detailed specifications of the GP20, see the following general specifications. Material No.: GS 04L52B01-01EN For the detailed specifications of the GM10, see the following general specifications. Material No.: GS 04L55B01-01EN For the detailed specifications of the I/O modules, see the following general specifications. Material No.: GS 04L53B01-01EN For the detailed specifications of the Digital Indicating Controller, see the following general specifications. Material No.: GS 05P01D81-01EN Material No.: GS 05P01C81-01EN For the detailed specifications of the Wireless Input Unit (GX70SM), see the following general specifications. Material No.: GS 04L57B01-01EN Yokogawa Electric Corporation 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan GS 04L51B01-42EN ©Copyright October 2017 2nd Edition May. 9, 2018 GM10 (/CM2) GX20 (/CM2) GM10 (/CS2) Master Slave GP20 (/CM2) General Specifications

Upload: others

Post on 16-Dec-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

GS 04L51B01-42EN

GX20/GP20 (/CM2 option)GM (/CM2 and /CS2 options)920MHz Wireless Communication

OVERVIEWWireless communication (902.1 to 927.9MHz band) enables the GX20(/CM2), GP20(/CM2), GM10(/CM2) to communicate as a master with compatible GM10 slaves (/CS2), UT52A/UT32A(suffix code type 3:B), and Wireless Input Unit (GX70SM), other Modbus devices and wireless communication sensors. Because slaves are equipped with a repeater function, they can be used to extend the communication distance.(This product can only be used in the US.)

Even when wireless communication is cut off, the most suitable communication route is automatically selected.

* Multi-hop

GX20 (/CM2)

GM10 (/CM2)

Slave (GM10 (/CS2))

Slave (UTA52/UTA32)

Slave (GM10 (/CS2))

Slave (GM10 (/CS2))

Master

GP20 (/CM2)

Sensor (GX70SM)

Features•Asinglemastercanaccommodateupto100slaves.*1Thisislimitedto99fortheUT.

•Theoutputlargerthanthatofconventionalspecifiedlowpowerradioachievingarangeofabout800m*2withaclearline-of-sight.

•Withmulti-hopconnection,evenwhenwirelesscommunicationiscutoffduetotemporarydeteriorationinradioconditions,themostsuitablecommunicationrouteisautomaticallyselectedtoresumewirelesscommunication.

GM10slaves(/CS2option)andUTslavescanbeusedasrepeaterstoextendcommunicationdistanceandimproveradioquality.

•Featuresofthe900MHzband(comparedtothe2.4GHzband)• Becausetheradiofrequencyislow,radiosignalsattenuatelessinthetransmissionroute.

• Becausetheradiofrequencyislowandthetendencytogostraightislower,theradiosignalscanmoreeasilydiffractaroundobstacles.

•Nolicenseisrequired.*1 Thenumberofunitsthatcanconnectedmaybelimitedby

thecommunicationdatasizeorthetransmissioninterval. Whenusedforlow-speedmovingbodies,themaximum

numberofroutersislimitedto50includingrepeaters.*2 Therangedependsontheoperatingenvironment.

ForthedetailedspecificationsoftheGX20,seethefollowinggeneralspecifications.MaterialNo.:GS04L51B01-01EN

ForthedetailedspecificationsoftheGP20,seethefollowinggeneralspecifications.MaterialNo.:GS04L52B01-01EN

ForthedetailedspecificationsoftheGM10,seethefollowinggeneralspecifications.MaterialNo.:GS04L55B01-01EN

ForthedetailedspecificationsoftheI/Omodules,seethefollowinggeneralspecifications.MaterialNo.:GS04L53B01-01EN

ForthedetailedspecificationsoftheDigitalIndicatingController,seethefollowinggeneralspecifications.MaterialNo.:GS05P01D81-01ENMaterialNo.:GS05P01C81-01EN

ForthedetailedspecificationsoftheWirelessInputUnit(GX70SM),seethefollowinggeneralspecifications.MaterialNo.:GS04L57B01-01EN

YokogawaElectricCorporation2-9-32,Nakacho,Musashino-shi,Tokyo,180-8750Japan

GS04L51B01-42EN©CopyrightOctober20172ndEditionMay.9,2018

GM10 (/CM2)

GX20 (/CM2)

GM10 (/CS2)

Master

Slave

GP20 (/CM2)

GeneralSpecifications

Page 2: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

May. 9, 2018-00

SPECIFICATIONS● 920 MHz wireless communication (/CM2 and /

CS2)•Wirelesscommunicationstandard:FCCPart15

SubpartCcompliant(§15.247)•Carrierfrequencyband:902.1to927.9MHz•Wirelesschannelspacing:600kHz•Numberofwirelesschannels:43•Maximumtransmissionoutput:20mW•Modulationmethod:GFSK•Antenna:Externalantenna(soldseparately),RP-

SMA-Pconnector•Maximumnumberofslavereceptions:100(number

ofslavereceptionsbyasinglemaster,variesdependingonthecommunicationconditions)

•Maximumpacketsize:2048bytes•Datarate:100kbpsmax.•Communicationdistance(line-of-sightdistance):

800mmax.(dependsontheoperatingenvironment)

•Communicationformat:Mesh/multi-hop*(maximumnumberofhops:16)

* Afunctionthatautomaticallyselectsthebestcommunicationpathaccordingtothecommunicationqualitybetweenunits.Itcanbeusedtoextendthecommunicationdistanceandimprovetheradioquality.

•LEDdisplay:DisplaysthewirelessstatususingST1(green/red)andST2(green/red)

•Securityfunction:AES128bitencryption•Implementedprotocol:Modbus(master/slave)

protocol•Modbusslavefunction(/CS2option):Datacanbe

writtenandreadfromModbusmasterdevices(masters(/CM2option)).

•Modbusmasterfunction*(/CM2option):ReadingandwritingdatatoModbusslavedevice

* Thecommunicationchannelfunction(/MCoption)isrequired.Readdataiswrittentocommunicationchannels.

Communicationcycle:Whenreceiverfunctionis[Modbusmaster]500ms,1s,2s,5s,10s,1minWhenreceiverfunctionis[Wirelessinputunit]1s,2s,5s,10s,20s,30s,1min,2min,5min,

10min,20min,30min,1hNote:Onlytheabovecommunicationcycleswillwork

properly.Numberofcommands:100Commandtypes:Off,read,write

•Configuration/measurementcommunication:Thefollowingfunctionsareavailableusingthededicatedsoftware.

GM10wirelesscommunicationsettings Informationaboutslavesconnectingtothe

GM10 GM10wirelesscommunicationstatus

monitoring* MH920ConsoleInternational,aconsole

softwareapplicationmadebyOkiElectricIndustryCo.,Ltd.

•Wirelesscommunicationconfigurationinterface:USB2.0mini-Btype)

•Rebootswitch:Forrebootingthesystemafterchangingwirelesssettings

Number of connectable slaves and number of connectable channels depending on Modbus communication cycle*

Number of slaves

Modbus communication cycle500ms 1s 2s

1 125ch 370ch 500ch2 80ch 250ch 500ch4 --- 160ch 500ch8 --- --- 320ch

* Numberofchannelsfor1worddata(INT16,UINT16).Thisvariesdependingontheprocessingloadinthedeviceandcommunicationquality.

Dedicated external antenna (sold separately):*

ItemType

Sleeve antenna Roof top antenna

PartNo. A1061ER A1062ERInstallationenvironment

Indoors Indoorsandoutdoors

Cablelength - 2.5 mAntennatype Dipole StandaloneMaximumgain 3dBiorless 2dBiorlessDirectivity NoConnector RP-SMA-POperatingtemperaturerange

-20to65°C

Waterproofproperty

Notwaterproof Waterresistant(IPX6)

Dimensions 196mm(includingtheconnector)

83mm(includingthebasestand)

* Onlydedicatedantennascanbeused.

Compliant Standards•GX20(/CM2options),GP20(/CM2option),GM10(/

CM2and/CS2options)OnlyUSFCCstandardsandCSA/ULstandardsaresupported.

•GM90PS(/Woption)CSA/ULstandardsarenotsupported.

2

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN

Page 3: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

May. 9, 2018-00

● Wireless Input Unit Support Function of the GX20/GP20/GM10 (CM1 option) (R4.02.01 and later)

Datacollectionandstatusmonitoringofwirelessinputunitsarepossible.•NumberofGX70SMconnections*

ModelMeasurement mode (GX/GP/GM)Normal High

speedDual interval

GX20-1/GP20-1/GM10-1 Max.50devices Max.30devices

GX20-2/GP20-2/GM10-1 Max.96devices Max.50devices

* Thenumberoftechnicallypossibleconnections variesdependingonthewirelesscommunication conditionandthemeasurement/transmission interval.

•Autoconfigurationfunction Automaticallyconfiguresthewirelessinputunitdata

collection settings.•Wirelessdatadropoutdetectionfunction Detectsdatacollectiondropoutsduetowireless communicationerrorsorthelike.

•Management,monitoring,andmaintenancefunctions Displayswirelessinputunitinformation. Statusmonitoringandmaintenanceperiod managementareavailable.

•Loopcalibrationfunction Wirelessinputdatacorrectionusingthecalibration correctionfunction

•WebapplicationandHardwareConfiguratoralso supportwirelessinputunitfunctions.

GX20/GP20/GM10(Mastre)

GX70SM

Wireless Network(PAN)

GX70SMMax. 96

GX70SM

Wireless input unit reconfiguration display

3

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN

Page 4: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

May. 9, 2018-00

HARDWARE SPECIFICATIONS● External dimensions

Unit:mm[approx.inch]

GX20When using the sleeve antenna

218.3(8.59) 376.1(14.81)

182.

75(7

.19)

When using the roof top antenna

19.8

5(0.

78)

190.3(7.49)

Unit: mm (approx. inch)Unless otherwise specified, tolerance is ±3% (however, tolerance is ±0.3 mm when below 10 mm).

Rear view

Reboot switchUSB port(mini B type)USB 2.0 compliant, for wireless communication configurationLEDStatus LED, ST1 (green/red), ST2 (green/red)Antenna connector

4

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN

Page 5: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

May. 9, 2018-00

Unit:mm[approx.inch]

GP20When using the sleeve antenna

206.

75(8

.14)

213.9(8.42) 342.7(13.49)

When using the roof top antenna

Unit: mm (approx. inch)Unless otherwise specified, tolerance is ±3% (however, tolerance is ±0.3 mm when below 10 mm).

46.0

5(1.

81)

185.9(7.32)

Rear view

Reboot switchUSB port (mini B type)USB 2.0 compliant, for wireless communication configurationLEDStatus LED, ST1 (green/red), ST2 (green/red)Antenna connector

5

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN

Page 6: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

May. 9, 2018-00

Unit:mm[approx.inch]GM10When using the sleeve antenna

183.3[7.22]

145 [5.71]

302.8 [11.92]

When using the roof top antenna

116.9 [4.60]Antenna connection port

Reboot switch

Status LEDST1 (green/red)ST2 (green/red)

USB port for 920 MHz wireless communication configuration

6

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN

Page 7: General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV ......resume wireless communication. GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance

May. 9, 2018-00

MODEL AND SUFFIX CODES● GX20 Model and Suffix Codes

Model Suffix Code

Optional code Description

GX20 Paperlessrecorder(Panelmounttype,Largedisplay)

Type -1 Standard(Max.measurementchannels:100ch)

-2 Largememory(Max.measurementchannels:500ch)

Displaylanguage

E English,degF,DST(summer/wintertime)

Optionalfeatures

/CM2 920MHzwireless(Master)*1*2*3

● GP20 Model and Suffix Codes

Model Suffix Code

Optional code Description

GP20 Paperlessrecorder(Portabletype,Largedisplay)

Type -1 Standard(Max.measurementchannels:100ch)

-2 Largememory(Max.measurementchannels:500ch)

Displaylanguage

E English,degF,DST(summer/wintertime)

Powersupply 1 100VAC,240VAC2 12VDC

Optionalfeatures /CM2 920MHzwireless(Master)*1*2*3

*1 /C2and/C3and/CM2cannotbespecifiedtogether.*2 ThisproductcanonlybeusedintheUS.*3 IfyouspecifyCM2,youmustalsospecifythe

communicationchannelfunction(/MCoption).

● GM10 Model and Suffix Codes

Model Suffixcode

Optional code Description

GM10 DataAcquisitionModuleforSMARTDAC+GM

Type -1 Standard(Max.measurementchannels:100)

-2 Largememory(Max.measurementchannels:500)

Area E General— 0 AlwayszeroOptionalfeatures /CM2 920MHzwireless(Master)*1*2

/CS2 920MHzwireless(Slave)*2

*1 IfyouspecifyCM2,youmustalsospecifythecommunicationchannelfunction(/MCoption).

*2 /C3,/CM2,and/CS2cannotbespecifiedtogether.

● GM90PS Model and Suffix Codes

Model Suffix Code Optional code Description

GM90PS PowerSupplyModuleforSMARTDAC+GM

Type -1 Always–1Area N GeneralSupplyvoltage 1 100-240VAC

2 12-28VDC*1Powersupplyconnection

D PowerinletwithUL/CSAcable

W Screwterminal(M4)(withoutpowercable)

— 0 AlwayszeroOptionalfeatures /W For920MHzwireless*2

*1 OnlyW(Screwterminal(M4))isavailableforthepowersupplyconnection.

*2 TheonlypowersupplymodulethatcanbeusedwithGM10’s920MHzwirelesscommunication(/CM2and/CS2options)isGM90PS-1N1D0/WorGM90PS-1N2W0/W.

OPTIONAL ACCESSORIES (SOLD SEPARATELY)

Product Model/part no.

Sleeveantenna(indooruse) A1061ERRooftopantenna(indoorandoutdooruse,cablelength:2.5m)

A1062ER

Test Certificate (QIC, sold separately)QICisavailableforeachmodel.

User’s ManualProductuser’smanualscanbedownloadedfromthefollowingURL.YouwillneedAdobeReader7orlaterbyAdobeSystems.

URL: www.smartdacplus.com/manual/en/

TrademarksTheTCP/IPsoftwareusedinthisproductandthedocumentforthatTCP/IPsoftwarearebasedinpartonBSDnetworkingsoftware,Release1licensedfromTheRegentsoftheUniversityofCalifornia.SMARTDAC+isatrademarkofYokogawaElectricCorporation.Microsoft,MS,andWindowsaretrademarksorregisteredtrademarksofMicrosoftCorporationintheUnitedStatesandothercountries.PentiumisaregisteredtrademarkofIntelCorporation.ModbusisaregisteredtrademarkofSchneiderElectric.KerberosisatrademarkofMIT.BluetoothisatrademarkorregisteredtrademarkofBluetoothSIGInc.Othercompanynamesandproductnamesappearinginthisdocumentareregisteredtrademarksortrademarksoftheirrespectiveholders.Thecompanyandproductnamesusedinthismanualarenotaccompaniedbytheregisteredtrademarkortrademarksymbols(®and™).

7

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN