1

General Guidelines for SPOP• SPOP is ordered and implemented on a per switch, per LATA basis

– Overflow is not permitted/allowed among/between different switches• SPOP conversions must follow CenturyLink project guidelines• Service Managers must obtain appropriate LATA Maps from the Wholesale SPOP website

and email diagrams to customer to complete• Service Managers will control and validate LATA Maps (diagrams) to be used in conjunction

with the Customer SPOP Checklist in the kick off (pre-provisioning meeting)• Completion of the SPOP Checklist and LATA Maps are required as part of the Joint Planning

Process• Customer is responsible for sharing LATA Maps, Customer SPOP Checklist and all

documentation related to SPOP with people within their own company associated with SPOP implementation (e.g., Network, Order Writing, Provisioning, etc.,)

• For WSPs, the Service Manager will assist the customer for localities where 2 way trunking is not available due to cell pack feature unavailability.

• SLRN may be in affect on your local trunk groups - Conversion to SPOP may result in traffic pattern changes

• You may not need a trunk group to the local tandem:If you are only serving customers in this Local Tandem Area using a LRN that is outside of the Local Calling Area and;You do not have a full NPA-NXX and;You exchange less than one DS1 or less than 512 BHCCS worth of traffic to the local tandem and you are not using ARLRN but normal (default) routing

• You may still want a trunk group to the local tandem for your originating traffic to CenturyLink and other A-Record Holder Providers in the Local Calling Area

• You will only need to connect to access tandems where you are the A-Record Holder doing business served by that access tandem.

IDAHO LATA 652

Rev. 03/16/2012

2

NPA-NXXs

LERG SWITCH CLLI

ACTUAL SWITCH CLLI & POINT CODE

POI / ACTL CLLI

BOISIDMA01T ACCESS TANDEM

Subtending Localities

* Locality covered by local tandem – submit diagram for local tandem, also.

IDAHO LATA 652

REV. 8/18/10

*AMERICAN FALLS *GRACE *MURTAUGH

*BANCROFT *HAGERMAN *NAMPA

*BLACKFOOT *HAILEY

*NEW PLYMOUTH

ONTARIO

*BLISS *HAZELTOWN *PAYETTE

*BOISE HEYBURN *POCATELLO

*BUHL *IDAHO CITY *PRESTON

*BURLEY *IDAHO FALLS *REXBURG

*CALDWELL *INKOM *RIGBY

*CASTLEFORD *JEROME *RIRIE

*DAYTON *KETCHUM *RIVERSIDE

*DECLO *KIMBERLY *ROBERTS

*DIETRICH *KUNA *SHELLEY

*DOWNEY *LAVA HOT SPRINGS *SHOSHONE

*EAGLE *LEWISVILLE MENAN *SODA SPRINGS

*EDEN *MCCAMMON *STAR

*EMMETT *MELBA *THATCHER

*FIRTH *MERIDIAN *TWIN FALLS

*FRANKLIN *MIDDLETON *WEISER

*GLENNS FERRY *MONTPELIER *WENDELL

*GOODING *MOUNTAIN HOME *SUN VALLEY

NOTE: BOISIDMA01T is a partitioned tandem, handling both local and access tandem functionality. Order separate trunks to access and local tandems

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

CUSTOMER NAME and ACNA

3

INSTRUCTIONS• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in LATA 652 (on

ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire).• In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page

of the ASR) and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.

• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.

• EITHER enter a single line from POI/ACTL CLLI box to each access tandem circle and label “2W SPOP COMBINED” and include quantity of trunks requested OR enter 2 lines from POI/ACTL CLLI box to each access tandem circle and label top line “2W SPOP IXC” and bottom line “2W SPOP Local/Intra” and include quantity of trunks requested.

• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.

* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”

IDAHO LATA 652

Rev. 02/17/2012DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

4

NPA-NXXs

LERG SWITCH CLLI

ACTUAL SWITCH CLLI & POINT CODE

BOISIDMA01T

LOCAL TANDEM

Subtending Localities

IDAHO LATA 652

REV. 7/21/09

NOTE: BOISIDMA01T is a partitioned tandem, handling both local and access tandem functionality. Order separate trunks to access and local tandems

BOISE

CALDWELL

EAGLE

EMMETT

GLENNS FERRY

IDAHO CITY

KUNA

MELBA

MERIDIAN

MIDDLETON

MOUNTAIN HOME

NAMPA

NEW PLYMOUTH

PAYETTE

STAR

WEISER

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

CUSTOMER NAME and ACNA

If Existing POI/ACTL CLLI – Identify the POI/ACTL CLLIIf Need New POI/ACTL CLLI – Identify City Name for the POI/ACTL CLLI

5

INSTRUCTIONS

• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the BOISE, ID LOCAL

CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.

• In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR) and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.

• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.

• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.

• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.

* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”

Rev. 03/16/2012

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame

WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes

IDAHO LATA 652

6

NPA-NXXs

LERG SWITCH CLLI

ACTUAL SWITCH CLLI & POINT CODE

PCTLIDMA4GT

LOCAL TANDEM

Subtending Localities

IDAHO LATA 652

REV. 7/21/09

AMERICAN FALLS MCCAMMON

BANCROFT MONTPELIER

BLACKFOOT POCATELLO

DAYTON PRESTON

DOWNEY REXBURG

FIRTH RIGBY

FRANKLIN RIRIE

GRACE RIVERSIDE

IDAHO FALLS ROBERTS

INKOM SHELLY

LAVA HOT SPRINGS SODA SPRINGS

LEWISVILLE MENAN THATCHER

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

CUSTOMER NAME and ACNA

If Existing POI/ACTL CLLI – Identify the POI/ACTL CLLIIf Need New POI/ACTL CLLI – Identify City Name for the POI/ACTL CLLI

7

INSTRUCTIONS

• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the POCATELLO, ID LOCAL

CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.

• In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR) and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.

• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.

• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.

• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.

* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”

Rev. 03/16/2012

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame

WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes

IDAHO LATA 652

8

NPA-NXXs

LERG SWITCH CLLI

ACTUAL SWITCH CLLI & POINT CODE

TWFLIDMA2GT

LOCAL TANDEM

Subtending Localities

IDAHO LATA 652

REV. 7/21/09

BLISS

BUHL

CASTLEFORD

DIETRICH

EDEN

GOODING

HAGERMAN

HAZELTOWN

JEROME

KIMBERLY

MURTAUGH

SHOSHONE

TWIN FALLS

WENDELL

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

CUSTOMER NAME and ACNA

If Existing POI/ACTL CLLI – Identify the POI/ACTL CLLIIf Need New POI/ACTL CLLI – Identify City Name for the POI/ACTL CLLI

9

INSTRUCTIONS

• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the TWIN FALLS, ID LOCAL

CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.

• In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR) and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.

• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.

• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.

• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.

* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”

Rev. 03/16/2012

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame

WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes

IDAHO LATA 652

10

NPA-NXXs

LERG SWITCH CLLI

ACTUAL SWITCH CLLI & POINT CODE

HALYIDMA01T

LOCAL TANDEM

Subtending Localities

IDAHO LATA 652

REV. 7/21/09

HAILEY

KETCHUM

SUN VALLEY

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

CUSTOMER NAME and ACNA

If Existing POI/ACTL CLLI – Identify the POI/ACTL CLLIIf Need New POI/ACTL CLLI – Identify City Name for the POI/ACTL CLLI

11

INSTRUCTIONS

• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the HAILEY, ID LOCAL

CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.

• In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR) and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.

• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.

• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.

• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.

* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”

Rev. 03/16/2012

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame

WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes

IDAHO LATA 652

12

NPA-NXXs

LERG SWITCH CLLI

ACTUAL SWITCH CLLI & POINT CODE

BRLYIDMA01T

LOCAL TANDEM

Subtending Localities

IDAHO LATA 652

REV. 7/21/09

BURLEYDELCO

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame.

CUSTOMER NAME and ACNA

If Existing POI/ACTL CLLI – Identify the POI/ACTL CLLIIf Need New POI/ACTL CLLI – Identify City Name for the POI/ACTL CLLI

13

INSTRUCTIONS

• Use previous slide as a template. Copy all and paste to new document• In top left box enter the full NPA-NXXs* assigned to the switch and in the BURLEY, ID LOCAL

CALLING AREA (on ASR, full NPA-NXXs should go in CNPANXX fields on Translations Questionnaire). If no full NPA-NXXs, MAY REQUEST ARLRN. SEE ARLRN PCAT FOR MORE INFORMATION.

• In center left boxes enter LERG switch CLLI (this is always the PSL on the ICASR page of the ASR) and POI/ACTL CLLI (this is the ACTL on the ICASR page). If POI/ACTL CLLI is owned by another OCN, LOA must be provided.

• In lower left hexagon enter actual switch CLLI from SHA screen in LERG and point code (actual switch CLLI is always the CSL and the point code is entered in the CSPC field on the TRUNKING form of the ASR). LERG switch CLLI and actual switch CLLI may be the same if the actual switch is in the same LATA and then PSL and CSL would be the same CLLI.

• Enter a single line from POI/ACTL CLLI box to each local tandem circle and label “2W SPOP LOCAL” and include quantity of trunks requested.

• Indicate the CenturyLink localities where you will be conducting business by changing the color to red.

* Full NPA-NXXs – also known as “Code Holder”, “LERG Assignee”, or “A Record Holder”

Rev. 03/16/2012

DISCLAIMER: all routing should follow LERG routing guidelines. SPOP diagrams are valid for 6 months from date of approval; implementation must occur within that time frame

WARNING – SLRN may be in affect on your local trunk groups -Conversion to SPOP may result in traffic pattern changes

IDAHO LATA 652