general catalogue_sices genset controllers.pdf
TRANSCRIPT
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
1/12
SICES Srl provides a wide range of smart genset controllers for several
applications like:
ATS -Automatic Transfer Switch
AMF -Automatic Mains Failure
Synchro/Parallel applications like:
MPM -Multiple Prime Mover
MSB -Multiple Stand-by
SPtM or MPtM -Single or Multiple Parallel to Mains
SPtM or MPtM - Single or Multiple Parallel to Mains in stand-by and back syncro
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
2/12
SPM -Single Prime Mover
No Mains Circuit Breaker (MCB)
Genset Circuit Breaker (GCB) control
Engine and alternator protections monitoring
Remote start control and date / time scheduler
Models of genset controllers: GC315 / GC310 / GC350
AMF & ATS -Automatic Mains Failure & Automatic transfer switch
Mains Circuit Breaker (MCB) control
Genset Circuit Breaker (GCB) control
Engine and alternator protections monitoring (AMF)
Remote start control and date / time scheduler
Models of genset controllers: GC315 / GC310 / GC350 / ATS100
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
3/12
GC350 -GC350R
AMF&ATS and SPM Genset controller which includes the main engine and
alternator protections with True RMS readings. Just one product for analogue(with sensors) and CANBUS J1939 engines.
GC315
New AMF&ATS and SPM Genset controller which includes the main engineand alternator protections with True RMS readings.Just one product for analogue (with sensors) and CANBUS J1939 engines.
GC310
AMF&ATS and SPM Genset controller which includes the main engine andalternator protections with True RMS readings.Just one product for analogue (with sensors) and CANBUS J1939 engines.
ATS100
ATS controller able to manage the switch between two sources (Mains orGensets).
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
4/12
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
5/12
MPM -Multiple Prime Mover
No Mains Circuit Breaker (MCB)
Genset Circuit Breakers (GCB) control
Engine and alternator protections monitoring
Synchronization, Load sharing and Paralleling function
Models of genset controllers: GC500Plus / DST4602
MSB -Multiple Stand-by
Mains Circuit Breaker (MCB) control
Genset Circuit Breakers (GCB) control
Engine and alternator protections monitoring
Synchronization, Load sharing and Paralleling function
Models of genset controllers: GC500Plus / DST4602
SPtM Single Parallel to Mains with possibility of backsynchro
Mains Circuit Breaker (MCB) control
Genset Circuit Breaker (GCB) control
Engine, alternator, Mains protections monitoring
Synchronization and Paralleling function
Models of genset controllers: GC500Plus / DST4602
MPtM -Multiple Parallel to Mains with possibility of backsynchro
Mains Circuit Breaker (MCB) control
Genset Circuit Breakers (GCB) control
Engine, alternator, Mains protections monitoring
Synchronization, Load sharing and Paralleling function
Models of genset controllers: GC500Plus / DST4602 / MC100
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
6/12
MC100
Supervisor controller for multiple mains parallel applications with severalgensets working in emergency mode
DST4602
The most advanced Genset controller for synchro/parallel applications.Controller particularly suggested for complex plants like CHP plants where PLCfunctions are required.DST4602 is available in two versions: compact or split (one box to be mountedinto the control panel and one display to be mounted on the door of the panel).
GC500Plus -GC500R
Genset controller for synchro/parallel applications (Island mode either Mainsparallel). Just one controller able to cover a wide range of applications.Synchronizer and Load sharing included.
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
7/12
GC315 GC310 GC350 ATS100 GC500Plus DST4602 MC100
AMF Functions (single stand-by) X X X X X
ATS Functions X X X X X X X
SYNCHRO/PARALLEL applications (in
island and/or with the mains, soft
return)
X X X
Internal Load Sharing and
SynchronizerX X X
Load shedding X
Load management X X X
Mains circuit breaker (MCB)
management, Master circuit breaker
management (MGCB), Bus tie breaker
management (BTB)
X X X
Reverse synchronizing of the gen-set
group operating in multi-island mode
to the mains
X X X
PLC Functions with PID Block X
Master and Gen set changeover switch
or MCB managementX X X X X X X
Management of multiple mains
incomersX
True RMS readings on generator and
mains voltages and currentsX X X X X X X
Active, Reactive and apparent power
measurementX X X X X X X
Frequency and power measurement on
Mains inputX X X X X X X
Mains protections Rate of Change of
Frequency (81R ROCOF) Vector shift,
27, 59, 81
X X X
Additional mains protections: 27Q, 27T X
J1939 and MTU CAN interface X X X X X X X
RS232 Modbus RTU interface X X X X X X X
RS485 Modbus RTUX
(insulated)
O(external device)
XO
(external device)X
X(insulated)
X
MODEM GSM/PSTN X X X X X X X
X StandardO Option
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
8/12
GC315 GC310 GC350 ATS100 GC500Plus DST4602 MC100
RJ45 Ethernet port O(on board)
O(external device)
O(external device)
O(external device)
O(external device)
O(on board)
O(external device)
SMS Management X X X X X X X
GPRS/GSM/GPS communicationsO
(external device)
O(external device)
O(external device)
O(external device)
O(external device)
O(external device)
O(external device)
USB Port X X
DIGITAL INPUT 8+3 8+3 18+3 8+3 18+3 20 18
DIGITAL OUTPUT8
(6 programmable)
8(6 programmable)
168
(6 programmable)16 16 14
Additional DIGITAL INPUT/OUTPUT 16/16 16/16 16/16 16 128
Additional ANALOGICAL INPUT/
OUTPUT10+10/4 (1) 10+10/4 (1) 10+10/4 (1) 10+10/4 (1) 64/32
Periodical test X X X X X X
Auto starting with timer X X X X X X
Auto starting inhibition X X X X X X X
Events and data logging X X X X X X X
Fuel management X X X X X
Four alternative configurations X X X X X X X
SPLIT Version available
(box + separated display)X
Dimensions 247x187x70 247x187x70 247x187x70 247x187x70 247x187x70 260x205x76mm 247x187x70
Display (pixel)
128 x 64
128 x 64
128 x 64 128 x 64
128 x 64
240 x 128
128 x 64
Marine Certication (RI.NA) X (GC350R) X (GC500R)
Display languagesUK, FR, ITA, RU,
PT
UK, FR, ITA, RU,
PT
UK, FR, ITA, RU,
PT
UK, FR, ITA, RU,
PT
UK, FR, ITA, RU,
PT
UK, FR, ITA, RU,
DE, ESUK, ITA, RU
(1) 10 Programmable analogical Input + 10 Analogical input listed in J1939 list + 4 Programmable and analogical output
X StandardO Option
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
9/12
DITELExpansion module for additional, digital and programmable I/O.Model with CPU including 16 INPUTSModel without CPU including 8 OUTPUTS.
Compatibility with: GC315, GC310, GC350, GC500Plus, DST4602.
DITHERM, DIVIT, DIGRIN, DANOUTExpansion modules for additional, analogue I/O.Different models based on the type of the sensor
Compatibility with: GC315, GC310, GC350, GC500Plus, DST4602.
REWIND, DANCECommunication modules for GPRS/GSM/GPS interface (Rewind) andfor Ethernet interface (Dance) using the monitoring systemSI.MO.NE.
MODEM GSM GL865 -Traditional modem GSM
Compatibility with: ATS100, GC315, GC310, GC350, GC500Plus,DST4602.
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
10/12
ELECTRIC FUEL PUMP 230V MANAGEMENTIts a kit which allows the detection of the fuel levels into the tank andthe control of a refilling fuel pump 230V.
Compatibility with: GC315, GC310, GC350, GC500Plus, DST4602.
ROUTER GSMExtensive device which allow to use one GSM modem for severalcontrollers. The same for Gateway module-
Compatibility with: GC315, GC310, GC350, GC500Plus, DST4602,MC100
GATEWAY MODBUS TCP/ITIts used to connect one or several Modbus RTU devices to anEthernet network.Inbuilt Web server and possibility to manage up to 4 contemporaryconnections coming from different PC stations.
Compatibility with: GC315, GC310, GC350, GC500Plus, DST4602,MC100
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
11/12
SICES SUPERVISOR
Its a software by means its possible to monitor, reset, and even program the controller from any remote place.It is a configurable tool able to display the single line of the diagram. In addition, by means different password levelsits possible to start and stop the genset.
SI.MO.NE
Web based software for remote control of gensets using GPRS/GPS technology.Its particularly useful for rental gensets due to its possible to know and to be advised in case of events (alarm,shut-down, change of status) or in case of the genset is moved from the set position.That software allows to contemporary control many gensets displayed in one screen shot.
SI.MO.NE has to be supported by two hardware:
REWIND Modem GSM/GPRS and GPS (if a special antenna is connected) DANCE Device for an Ethernet connection
-
8/10/2019 General catalogue_SICES Genset controllers.pdf
12/12
-
-
-