ge zenith controls zt30 - the vanjen group · 2019. 2. 8. · ge zenith controls zt30™ 30-cycle...

15
MDS WiYZ TM GE Zenith Controls ZT30 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with a 30-cycle short time rating for both withstand and close-on operation.

Upload: others

Post on 24-Jan-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTMGE Zenith Controls ZT30™

30-Cycle Automatic Transfer Switch

The ZT30 is a UL1008 listed Automatic Transfer Switch with a 30-cycle short time rating for both withstand and close-on operation.

Page 2: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTM

• Facilitates Selective CoordinationSystem Design

• Maximizes System Availability

• Supplies 100% rated power to loads after short circuit/withstand event

• Industry Leading Short Time Rating for Withstand and Close-on

MDS WiYZTMGE Zenith Controls ZT30™

30-Cycle Automatic Transfer Switch

Page 3: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

A true selective coordination design must ensure that every Over Current Protective Device (OCPD) has higher overcurrent rating and a longer time-delay than the one below it, so that every fault will be cleared by the OCPD immediately “upstream” of the fault

• If Fault occurs at CL1, only OCPD7 should open…all other loads should remain operational

• The ATS must withstand a fault, close on potential fault and be functional after the fault to be properly coordinated…it must have a “UL Short Time Rating”

G

30-Cycle ATS

CL1

OCPD 1

CL3 CL4 CL5OCPD 7

CL2

Normal Source

OCPD 1

OCPD 2

OCPD 3

OCPD 8

OCPD 4 OCPD 5 OCPD 6

MDS WiYZTMFacilitates Selective Coordination Design

Page 4: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTMReliability/PerformanceMDS WiYZTMReliability / Performance

• Industry-leading durability and fault tolerance (85kA Short Time Rating)

• Maximizes system uptime/reliability

• Withstands and closes on a fault

• Supplies 100% rated power to loads after overcurrent event

Page 5: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTMReliability/PerformanceMDS WiYZTMReliability / Performance

• Electrical and Mechanical Interlock prevents Source 1 and Source 2 from being inadvertently closed at the same time (Standard/Delayed Transition)

Page 6: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTM

• ZT30 ATS enables operators to perform manual transfers with the door closed

• Manual transfers can be performed on a fully loaded switch

Safety:Manual Quick Make/Quick Break

Page 7: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

“Shutter System” adds another of layer of protection during maintenance

ShutterSystem

Safety:Shutter System

Page 8: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

Centralized Location forCustomer Interconnects

Multi-tap transformer enables operation on a wide range of system voltages

Ease of Use / Flexibility:Centralized Terminal Connection

Page 9: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

“Plug and Play” Interchangeable Source

Cable Termination kit

Kit enables installers to easily and quickly reconfigure the designation of Source 1 and Source 2 lugs

Ease of Use / Maintenance:Plug & Play Interchangeable Termination Kit

Page 10: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

Mechanical Position Indicators enable personnel to quickly determine the switch’s position

Ease of Use / Maintenance:Mechanical Position Indicator

Page 11: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTM

The ZT30’s small footprint and removable panels (side/back) provide space optimization and easy access for maintenance

Bypass-Isolation Transfer Switch

Space Optimization / Flexibility:Small Footprint/Removable Panels/Top or Bottom Cable Entry

Page 12: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTM

• Ease of Operation

• Advanced System Troubleshooting

• Diagnostics and Event Recording

• Power Quality Metering

• Enhanced Connectivity

Sequence of Events Recorder Waveform Capture/Oscillography

Advanced Control Features

Page 13: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

13 /GE /

Zenith ATS Product FamiliesFamilies Target

ApplicationsAmperage

RangeVoltageRange

Number of Poles

TransitionType

EnclosureType Controller

ZT30Life/Public Safety,Mission BusinessCritical Facilities

(Selective Coordination)

1000A -3000A 120V - 600V 3 or 4

• Standard• Delayed• Closed• Bypass

• Open• NEMA 1• NEMA 3R • NEMA 4• NEMA 4X• NEMA 12

• MX250• MX350

ZTEBusiness/

MissionCritical

40A - 4000A 120V - 600V 2, 3 or 4

• Standard• Delayed• Closed• Bypass

• Open• NEMA 1• NEMA 3R • NEMA 4• NEMA 4X• NEMA 12

MX350

ZTS Spec Grade & Custom App

40A - 4000A 120V - 600V 2, 3 or 4

• Standard• Delayed• Closed• Bypass

• Open• NEMA 1• NEMA 3R • NEMA 4• NEMA 4X• NEMA 12

MX250

ZTGGeneral Purpose

Commercial & Industrial40A - 3000A 120V - 600V 2, 3 or 4

• Standard• Delayed

• Open• NEMA 1• NEMA 3R • NEMA 4• NEMA 4X• NEMA 12

MX150

ZTX Small Frame Residential/Light Commercial

40A – 400A 120V - 480V 2, 3 or 4 • Standard• Open• NEMA 1• NEMA 3R

MX60

Page 14: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with

MDS WiYZTMPower Quality Solution

Automatic TransferSwitch (ATS)Ensures continuous power delivery from either utility or emergency power source to loads

Paralleling Switchgear (PSG)Assures optimal power generationand electrical distribution systemperformance

Product Lines:• Zenith ZDEC 2020 Modular

Paralleling Switchgear (PSG)

• Zenith Energy Commander™ Paralleling Switchgear (PSG)

Surge Protection Device (SPD)Mitigates peak voltage level of transient surge impulses that are imposed on electrical system conductors

Product Lines:• Din Rail Mount Series

• Wall-Mount Series

Product Lines:• ZT30 – Life/Public Safety, Business

Critical (Selective Coordination)

• ZTE – Mission Critical

• ZTS – Spec Grade/Custom

• ZTG – General Purpose

• ZTX – Light Residential/Commercial

Page 15: GE Zenith Controls ZT30 - The Vanjen Group · 2019. 2. 8. · GE Zenith Controls ZT30™ 30-Cycle Automatic Transfer Switch The ZT30 is a UL1008 listed Automatic Transfer Switch with