gb nl quintezz full hd dashcam · full hd dashcam + will now also be charged while recording. ......

2
ILLUSTRATIONS USER’S MANUAL GB NL FR D DECLARATION OF CONFORMITY Company: TE-GROUP nv Address: Kapelsestraat 61, 2950 Kapellen - BELGIUM declare, that the following equipment: Product Name: Product Type: Quintezz FULL HD Dashcam+ Dashboard camera Complies with the essential requirements, which are specified in the directive 2004/108/EC on the approximation of the laws on the Member States relating to electromagnetic compatibility. This product has been tested against following standards and specifications, applying versions valid on June 2013: EN 55022:2010 EN 55024:2010 Hereby, ------------------- Manual/FULL HD-Dashcam/09-13/V02 --------------------- Copyright©Quintezz d b e g 1 c a h f j l i k m n ILLUSTRATION I ILLUSTRATION II 2 4 3 ILLUSTRATION III

Upload: ngocong

Post on 01-Apr-2018

216 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: GB NL QUINTEZZ FULL HD DASHCAM · FULL HD DASHCAM + will now also be charged while recording. ... 7. You can now see all files in the folder and double-click them to watch the videos

VIDEO MENUResolution FHD 1080P

1920x1080 /1080i 144x1080 / 720P 1280x720/ WVGA 848x480 / VGA 640 x480 / QVGA 320x240

Video resolution

Loop Recording * Off / 1Minute / 2 Minutes * / 3 Minutes

Cycle recording: Saving time of each section on SD card

Exposure +2/3 / +1/3 / +0.0 / - 1/3/ - 2/3 / -1.0 / -4/3 / -5/3 / -2.0

ALuminance adjustment

Motion Detection * Off * Automatic recording when movement is detected

On

Audio OffSound recording On

Date stamp OffDate indication while recording

On

G-sensor * OffAdjust gravity accele- ration for activation of the G-sensor

2G4G8G *

Button sound OnOff

GB NL

ILLUSTRATIONS

USER’S MANUALGB NL FR D

DECLARATION OF CONFORMITY

We, the undersigned

Company: TE-GROUP nv

Address: Kapelsestraat 61, 2950 Kapellen - BELGIUM

declare, that the following equipment:

Product Name: Quintezz EC -Q35

Product Type: AC/DC compressor cooler / freezer

Conforms with the following requirements:

EN 60335-2-24: 2003 + A11: 2004 + A1: 2005 + A2: 2007EN 60335-1: 2002 + A11: 2004 + A1: 2004 + A12: 2006 + A2: 2006EN 55014-1: 2006EN 61000-3-2: 2006EN 55014-2: 1997 + A1: 2001EN 61000-3-3: 1995 + A1: 2001 + A2: 2005

Quintezz FULL HD Dashcam+

Dashboard camera

Complies with the essential requirements, which are specified in the directive 2004/108/EC on the approximation of the laws on the Member States relating to electromagnetic compatibility.

This product has been tested against followingstandards and specifications, applying versionsvalid on June 2013:EN 55022:2010EN 55024:2010

Hereby,

------------------- Manual/FULL HD-Dashcam/09-13/V02 ---------------------Copyright©Quintezz

QUINTEZZ FULL HD DASHCAM +

INTRODUCTIONCongratulations on your purchase. Please read all instructions carefully before using your device. You can use the QUINTEZZ FULL HD DASHCAM + inside your car to record your drives and dangerous situations or accidents on the road while driving.

PACKAGE CONTENTS See illustration I1. Camera DVR unit

a. POWER : Turn device on/off (Press shortly to turn the device on. Press and hold to shut it off when not connected to power source) + press shortly to turn on/off the IR LED lights

b. : Enter/exit the menuc. OK : Confirm the selected optiond. : Go up in the menu or zoom in digitally x 1/2/3/4 e. : Go down in the menu or zoom out digitally x 1/2/3/4f. M/ : Mode switching between VIDEO recording/PHOTO recording/ PLAYBACK/

Browse imagesg. USB connectionh. 1.5” TFT LTPS screeni. Microphonej. Reset : If your device stops working (crashes), you can reset your device and

turn it on again. k. Micro SD TF card slotl. IR LED’sm. Lensn. Speaker

2. Mounting bracket with suction cup3. 12/24V DC 5V – 700 mA Car charger4. USB connection cable

G-SENSOR FUNCTION:When gravity acceleration reaches 8 g (1g = 9.8m/s), the camera will automatically store the video and protect it against being auto-deleted. You can change this setting manually if desired.

SOS FUNCTION:Press M/ (f) shortly to immediately save and lock the video while it’s being recorded. shortly to immediately save and lock the video while it’s being recorded. On the micro-SD card, this file will be tagged with SOSxxxxx.

CHARGING• The device has a built-in Li-ion rechargeable battery that has to be fully charged

and discharged 4 times on battery function to activate the maximum capacity of the battery. Charging time is about 2 hours maximum.

• The status of the battery is indicated by following symbols:

100% 70% 25% 0% The red indication light turns on while charging and turns off once the battery has

been fully charged. • The camera records for approximately 1h when not connected to any power source.

Charging options:Connect the device to a computer/laptop using the USB connection cable (4). OR ORPlug the device into the included car charger (3) for use in car or truck.As soon as the car engine turns on, the device will start recording. The QUINTEZZ FULL HD DASHCAM + will now also be charged while recording. When the car charger is disconnected from the unit, the QUINTEZZ FULL HD DASHCAM + will shut down automatically and save the files.

Caution: • With low battery, the QUINTEZZ FULL HD DASHCAM + will enter a protection mode.

Please charge the battery to ensure you can turn on the device and continue to use it.• QUINTEZZ FULL HD DASHCAM + can only be used with the supplied 5V (12/24V) car

power supply. Any other power supply may cause errors and/or permanent damage to the device.

USING MICRO SD CARD (TF) (not included, optionally available) See illustration II• Insert your micro SD card into the SD slot until it clicks into place. • To remove the micro SD Card, press the card lightly. It is partially ejected allowing

you to pull the card out.• With no card in the SD slot, the display will inform you with an ‘Insert micro SD

card’ message.Note:1. We recommend using a 8GB SDHC micro card (or higher) with class 10, 15 MB/s

writing (or higher).2. Without SD card, the device will NOT work�Without SD card, the device will NOT work�3. If the micro SD card is inserted in a wrong way (difficult to insert), it may damage

the device and the memory card. 4. The device will automatically set up the micro SD-card after it’s been inserted.

VIDEO * IMAGE *

MICROSD CARD

1920xFHD 1080p 1440 x1080i 1280x 720p 4032x3024

12MP 2592x1944

5MP2048X1536

3MP 32GB 225 min 185 min 252 min 12624 31600 4831616 GB 112 min 92 min 126 min 6312 15080 241588GB 56 min 46 min 63 min 3156 7540 12079

* Depends on the brand, model and type (class) of the micro SD card�� Data are appro�imate�� �o rightsmicro SD card�� Data are appro�imate�� �o rights SD card�� Data are appro�imate�� �o rights reserved for these data’s��

MOUNTINGSee illustration III• Slide the QUINTEZZ FULL HD DASHCAM + (1) into the mounting bracket (2). • Moisten the suction cup, place it on the inside of your windshield and close the cup

using the lever. We recommend placing the QUINTEZZ FULL HD DASHCAM + on the right side of the rear view mirror.

• Adjust the bracket by using the adjustment knobs. • Make sure the camera is mounted horizontal for the best view. • Connect the car charger (3) to the car lighter for power.

USE OF THE QUINTEZZ FULL HD DASHCAM +A. MODESAttention: This menu will not work if PC Camera and/or Mass Storage mode is activated. VIDEO RECORDING MODEA camera icon would be shown in the upper left corner of the display��• When the QUINTEZZ FULL HD DASHCAM + is connected to your cars power

supply, it will start Video recording as soon as the car engine is started. It will stop recording after the car is stopped.

• When the QUINTEZZ FULL HD DASHCAM + is not connected to the cars power supply, press the POWER button (a), and press the OK button (c) to start recording. The unit will automatically be in Video recording mode. Press OK (c) again to stop recording and save the files automatically.

• Loop recording: During recording, the device will save each video file every 1, 2 or 3 minutes automatically. When the micro SD card is full, the device will delete the oldest video files automatically one by one.

Note: The infrared video recording function can be turned on manually in case of low-light circumstances if necessary. The display will show the following symbol: )

PHOTO MODEA photo icon would be shown in the upper left corner of the display��• Press the M/M/ - button (f) 1x if you want to make pictures instead of recordings. button (f) 1x if you want to make pictures instead of recordings. • Press the OK button (c) every time you want to take a picture.

PLAYBACK MODEA playback icon would be shown in the upper left corner of the display��• For Playback mode, press the M/M/ - button (f) 2x. button (f) 2x. • Use the & buttons (d-e) to scroll through the recordings.buttons (d-e) to scroll through the recordings.• Press OK (c) to start playback. • Press the OK button (c) to pause or begin playback again.OK button (c) to pause or begin playback again.button (c) to pause or begin playback again.

PC CAMERA MODE• You can connect the QUINTEZZ FULL HD DASHCAM + to your PC by using the supplied

USB cable. You can also use it to backup or playback files/videos on your PC.• Press the & buttons (d-e) to choose the mode and then press OK (c):buttons (d-e) to choose the mode and then press OK (c):

- Mass storage (USB mode) : It is a computer interface between a computer andMass storage (USB mode) : It is a computer interface between a computer and : It is a computer interface between a computer and a digital camera which shows the digital camera as a removable disk drive attached to the computer.

- PC Camera: A webcam is a: A webcam is a video camera which feeds its images in real time to a computer or computer network via USB.

You don’t need to install drivers to use the HD DASHCAM + with your PC because these are already installed by Windows/Macintosh in the Windows/Macintosh pack. You should connect the HD DASHCAM + as following :1. Make sure the battery is charged.2. Only use the SUPLLIED USB cable.3. Turn the DASHCAM ON.4. Connect the USB cable with the DASHCAM + before connecting it to the PC. 5. Select “MASS STORAGE”on the DASHCAM and press the OK button (c).6. The driver will now install itself and in the folder “My computer” on your desktop

you will see a new (hard)disk (it is possible that a window will appear in which you can indicate how you would like to view the files). The PC camera driver will be installed separately when PC Camera is selected.

7. You can now see all files in the folder and double-click them to watch the videos using the standard Windows Media Player or Apple Quicktime (you can select yourself).

Note:• You can also remove the micro SD card from the DASHCAM and place it in a (built-

in) micro SD card reader from your PC or a separate micro SD card reader if you have one. This is a quick and easy-to-use solution.

B. MENU SETTINGSAttention: This menu will not work if PC Camera and/or Mass Storage mode is activated.

1. Power on the unit with the supplied car charger or by using a fully charged battery.

2. Press M/M/ (f) until you have selected (f) until you have selected the desired mode#.

3. Press (b) to enter the menu#.4. Press & buttons (d-e) to scrollbuttons (d-e) to scroll

through the submenu’s.5. After selection, click OK (c) to confirm

and save the setting.6. Press (b) to exit the menu.

For example: to set date and time, please follow these steps:1. Make sure the battery is charged. 2. Turn the DASHCAM ON (or use it with

the car charger in the car).3. Press (b).4. Press (b) again. 5. Use the (e) button to go to DATE &

TIME.6. Press the OK button (c). 7. You can now use the & buttonsbuttons

(d-e) to change the date and time and confirm each setting by pressing the OK button (c). You can exit this menu by pressing the (b) button.

C. SYSTEM SETTINGSAttention: This menu will not work if PC Camera and/or Mass Storage mode is activated.

1. Power on the unit.2. Press (b) to enter the menu when the device is in recording mode#.3. Press (b) again to select the set up menu.4. Use the & buttons (d-e) to scroll through the submenu’s.buttons (d-e) to scroll through the submenu’s.5. After selection, click OK (c) to confirm and save the setting.6. Press (b) to exit.7. The new settings will be applied after restart of the device.

* Recommended setting# Only works when no recording has been started.

PHOTO MENU

Timer Single / 2S Timer / 5S Timer / 10S Timer

Resolution 12MP 4032x3024 / 10MP 3648 x2736 / 8MP 3264 x 2448 / 5MP 2592x1944 / 3MP 2048x1536/ 2MP HD 1920x1080 / VGA 640x 480 / 1.3MP 1280x960

Burst OffBurst mode On

Quality Fine / Normal / Low

Sharpness Strong / Normal / Soft

White Balance Auto* / Daylight / Cloudy / Tungsten / Fluorescent

Color Standard / Black & White / Sepia

ISO Auto* / 100 / 200 / 400

Exposure +2/3 / +1/3 / +0.0 / - 1/3 / - 2/3 / -1.0 / -4/3 / -5/3 / -2.0Luminance adjustment

Anti-Shaking * Off On *

Quick Review Off / 2 Seconds / 5 SecondsDate Stamp Off / Date / Set Date/TimeDate indication on photo

PLAYBACK MENUDelete Delete One / Delete AllFile removal

Protect Lock One / Unlock One / Lock All/ Unlock AllFile locking

Set Date/TimeMM/DD/YYDD/MM/YYYY/MM/DD

Auto Power Off * Off */ 1Minute / 3 MinutesAutomatic power off when use on battery

Language English, Dutch, French, Spanish, Italian, Portuguese, Czech, Hungarian, Swedish, Russian, Polish, German, Turkish, Greek

HZ frequency 50 Hz / 60 Hz

Backlight Saver * Off */ 3 Minutes/ 5 Minutes/ 10 Minutes*/ 3 Minutes/ 5 Minutes/ 10 Minutes/ 3 Minutes/ 5 Minutes/ 10 MinutesScreensaver when use on battery

Screen rotation Off / On

Format Internal memory / Micro SD cardIn case of problems with your micro SD-card (f��e��� “Memory full”) we recommend formatting your card from this menu��

Default Setting Cancel / OKReset to factory settings

Firmware version

TROUBLE SHOOTINGI cannot take pictures or record a video.→ Check if the TF-card has enough free storage left and make sure it is unlocked.

The device does not stop recording automatically .→ Use the compatible high-speed Micro SD TF card with SDHC because of big HD video data.

The SDHC TF card needs to be class 6 or higher.

I get the message “file error” while watching pictures or playing a recorded video.→ The files have not been saved correctly due to a micro SD card storage error. Please use the

format option in the menu of your device to reformat your TF-card.

My recordings are blurry.→ Make sure the lens is clean. Remove dust or finger prints if necessary.

I only see a black screen while trying to record air or water scenery.→ Scenes with big contrasts will influence your automatic image control function. You can adjust

the settings manually in the “Exposure” menu.

The colour is not perfect on cloudy day or in natural daylight.→ Reset the “White Balance” option to automatic.

Cross-stripe interference in image.→ This is caused by an incorrect light frequency. Please adjust the setting to 50 or 60 Hz

depending on the local power supply values.

My device keeps crashing.→ Reset the device by pressing the reset button with a sharp object (f.ex. a paperclip).→ Reset the Dashcam back to original factory settings through the menu in the device.

CUSTOMER SUPPORTFor all product related questions, please contact: [email protected] or consult our website www.quintezz.com for more information.

GUARANTEECopyright © Quintezz. Quintezz is a registered trademark of TE-Group NV. The Quintezz brand stands for superior product quality and outstanding customer service. That is why Quintezz warrants this product against all defects in material and workmanship for a period of two (2) years from the date of original purchase of the product. The conditions of this guarantee and the extent of responsibility of Quintezz under this guarantee can be downloaded from our website: www.quintezz.com.

VIDEO MENUResolutie FHD 1080P

1920x1080 / 1080i 144x1080 / 720P 1280x720 / WVGA 848x480 / VGA 640 x480 / QVGA 320x240

Videoresolutie

Loop Opname*Uit / 1 min. / 2 min. * / 3 min.

Cyclusopname: tijd van ieder deel op de micro SD-kaart opslaan

Belichting +2/3 / +1/3 / +0.0 / - 1/3 / - 2/3 / -1.0 / -4/3 / -5/3 / -2.0

Manuele instelling helderheid

Bewegingsdetect.* Uit* Automatisch opnemen wanneer er beweging wordt gedetecteerd

Aan

Audio UitOpname geluid Aan

Datumstempel UitWeergave datum op de opname

Aan

G-sensor * UitInstelling zwaartekracht versnelling voor activatie G-sensor

2G4G8G *

Bieptoon AanUit

FOTO MENU

Timer Eén / Timer 2 sec. / Timer 5 sec. / Timer 10 sec.

Resolutie 12MP 4032x3024 / 10MP 3648x2736 / 8MP 3264 x 2448 / 5MP 2592x1944 / 3MP 2048x1536 / 2MP HD 1920x1080 / VGA 640x480 / 1.3MP 1280x960

Serie UitBurst mode Aan

Kwaliteit Fijn / Normaal / Laag

Scherpte Sterk / Normaal / Zwak

Witbalans Auto* / Daglicht / Bewolkt / Tungsten / Fluorescerend

Kleur Standaard / Zwart/wit / Sepia

ISO Auto* / 100 / 200 / 400

Belichting +2/3 / +1/3 / +0.0 / - 1/3 / - 2/3 / -1.0 / -4/3 / -5/3 / -2.0Instelling helderheid

Anti-schok* UitAan *

Snel bekijken Uit / 2 sec. / 5 sec.Date Stamp Uit / Datum / Datum&tijdWeergave datum op de foto

AFSPEELMENUWissen 1 wissen / Alles verwijderenVerwijdering bestand

Beveiligen 1 vergrend. / 1 ontgrend. / Alles vergrend. / Alles ontgrend.

Vergrendeling bestand

QUINTEZZ FULL HD DASHCAM +

INLEIDINGGefeliciteerd met uw aankoop. Gelieve alle instructies aandachtig te lezen voordat u het apparaat gebruikt. U kunt de QUINTEZZ FULL HD DASHCAM + in uw auto gebruiken om uw ritten en gevaarlijke situaties en ongevallen op de weg tijdens het rijden op te nemen.

INHOUD VAN HET PAKKET Zie afbeelding I1. Camera DVR-systeem

a. AAN/UIT: apparaat in- en uitschakelen (1x kort indrukken om aan te zetten apparaat in- en uitschakelen (1x kort indrukken om aan te zetten en ingedrukt houden om uit te schakelen wanneer het apparaat niet op een stroombron aangesloten is) + IR LED lampen aan- en uitschakelen (kort indrukken)

b. : in/uit het menu gaanc. OK: de geselecteerde optie bevestigen de geselecteerde optie bevestigend. : omhoog in menu en voor 1/2/3/4 x digitaal inzoomen omhoog in menu en voor 1/2/3/4 x digitaal inzoomene. : omlaag in menu en voor 1/2/3/4 x digitaal uitzoomenf. M/ : mode omschakelen tussen VIDEO-opnamen/FOTO-opnamen/AFSPELEN/

Foto’s bekijkeng. USB aansluitingh. 1.5” TFT LTPS schermi. Microfoonj. Reset : als het toestel blokkeert (crash), kunt u een reset uitvoeren om het

toestel te herstartenk. Micro SD TF kaartsleufl. IR LED’sm. Lensn. Luidspreker

2. Monteerhouder met zuignap3. 12/24V DC 5V – 700 mA autolader4. USB-aansluitkabel

G-SENSOR FUNCTIE:Wanneer de zwaartekracht versnelling 8g (1g = 9.8m/s) bereikt, zal de camera auto-matisch de beelden als niet-verwijderbaar opslaan. U kunt deze instelling zelf wijzigen indien gewenst.

SOS FUNCTIE:Druk kort op M/ (f) om de huidige video-opnamen onmiddellijk beveiligd op te slaan tijdens de opname. Op de micro-SD kaart wordt dit bestand aangeduid als SOSxxxxx.

OPLADEN• In het apparaat is een oplaadbare Li-ion batterij ingebouwd die 4 keer volledig

opgeladen en ontladen moet worden op batterij-functie om de maximale capaciteit van de batterij te activeren. De oplaadtijd bedraagt ongeveer 2 uur (maximum). De oplaadtijd bedraagt ongeveer 2 uur (maximum).

• De status van de batterij wordt aangegeven door de volgende symbolen:

100% 70% 25% 0%

Het rode indicatielampje brandt tijdens het opladen en gaat uit als de batterij volledig opgeladen is.

• De camera werkt max. 1 uur wanneer hij niet op een stroombron aangesloten is.

Opties voor het opladen:Sluit het apparaat met behulp van de USB-aansluitkabel (4) op een computer/laptop aan.OFPlug het apparaat in de meegeleverde autolader (3) voor gebruik in een auto/vrachtwagen.Zodra de motor van de auto wordt opgestart, begint de camera beelden op te nemen. De QUINTEZZ FULL HD DASHCAM + wordt nu tijdens het opnemen ook opgeladen. Wanneer de autolader van het toestel wordt losgekoppeld, valt de QUINTEZZ FULL HD DASHCAM + automatisch uit en slaat hij alle bestanden op.

Opgelet: • Wanneer het batterijlaadniveau laag is, gaat de DASHCAM + in de beschermingsstand

staan. Laad de batterij op, zodat u het apparaat zeker kunt inschakelen en verder kunt gebruiken.

• De DASHCAM + kan enkel gebruikt worden met de bijgeleverde 5V (12/24V) autolader anders kan er een defect optreden.

GEBRUIK VAN EEN MICRO SD-KAART (TF) (niet meegeleverd, optioneel te verkrijgen)Zie afbeelding II• Schuif uw micro SD-kaart in de micro SD-sleuf tot ze op haar plaats klikt. • Druk licht op de micro SD-kaart als u ze uit de sleuf wilt halen. De kaart wordt dan

gedeeltelijk uitgeworpen, waarna u ze gemakkelijk kunt uitnemen.• Op het display staat het bericht ‘Micro SD kaart insteken’ wanneer er geen kaart in

de micro SD-sleuf zit.

Opmerking: 1. Wij adviseren het gebruik van een 8GB micro SDHC-kaart (of hoger) met klasse

10, 15 MB/s schrijven (of hoger).2. Zonder SD-kaart, werkt het toestel NIET�3. Als de micro SD-kaart verkeerd wordt ingevoerd (moeilijk om in te voeren), bestaat

het risico dat het apparaat en de geheugenkaart beschadigd raken. 4. Het apparaat stelt de micro SD-kaart in nadat ze werd ingevoerd.

VIDEO * IMAGE *

MICROSD CARD

1920xFHD 1080p 1440 x1080i 1280x 720p 4032x3024

12MP 2592x1944

5MP2048X1536

3MP 32GB 225 min 185 min 252 min 12624 31600 4831616 GB 112 min 92 min 126 min 6312 15080 241588GB 56 min 46 min 63 min 3156 7540 12079

* Afhankelijk van het merk, model en “klasse”type van de micro SD-kaart en bij benadering.

MONTAGEZie afbeelding III• Schuif de QUINTEZZ FULL HD DASHCAM + (1) op de monteerhouder (2). • Maak de zuignap vochtig, plaats ze op de binnenkant van de voorruit en sluit de

zuignap met behulp van de hendel. We adviseren u om de QUINTEZZ FULL HD DASHCAM + rechts van de achteruitkijkspiegel op te stellen.

• Stel de beugel in met behulp van de steldraaiknoppen. • Monteer de camera horizontaal, zodat u het beste zicht krijgt. • Sluit de autolader (3) op de sigarettenaansteker in de auto aan voor de nodige

stroom.

GEBRUIK VAN DE QUINTEZZ FULL HD DASHCAM +

A.MODILet op! Dit menu werkt niet indien de PC Camera en/of Mass Storage modus geactiveerd is.

VIDEO-OPNAMEMODUSIn de linkerbovenhoek van het display wordt een camerapictogram weergegeven��• Wanneer de QUINTEZZ FULL HD DASHCAM + op de voeding van uw auto is

aangesloten, begint hij videobeelden op te nemen zodra de motor van de auto wordt opgestart. Hij stopt met opnemen zodra de auto tot stilstand is gekomen. Hij stopt met opnemen zodra de auto tot stilstand is gekomen.

• Wanneer de QUINTEZZ FULL HD DASHCAM + niet op de voeding van uw auto is aangesloten, moet u op de ON/OFF-knop (a) en daarna op de OK-knop (c) drukken om beelden te beginnen op te nemen. Het toestel staat automatisch in de video-opnamemodus. Druk nog eens op OK (c) als u de opname wilt stoppen en de bestanden automatisch wilt opslaan.

• Opnemen in een lus: tijdens het opnemen slaat het apparaat ieder videobestand elke 1,2 of 3 minuten automatisch op. Wanneer de micro SD-kaart vol is, wist het toestel de oudste videobestanden automatisch 1 voor 1.

Opmerking: In slechte belichtingsomstandigheden kan u de infrarood video-opnamefunctie zelf inschakelen wanneer nodig. U zult dan in het scherm dit symbool zien staan:

FOTOMODUSIn de linkerbovenhoek van het display wordt een fotopictogram weergegeven��• Druk 1 keer op de M/ -knop (f) als u foto's in plaats van videobeelden wilt nemen. • Druk op de OK-knop (c) telkens wanneer u een foto wilt nemen.

AFSPEELMODUSIn de linkerbovenhoek van het display wordt een afspeelpictogram weergegeven��• Druk 2 keer op de M/ -knop (f) als u de afspeelmodus kiest. • Met behulp van de & knoppen (d-e) kunt u doorheen de opnamen scrollen.• Druk op OK (c) om met het afspelen te beginnen. • Druk op de OK knop (d) als u de opname tijdelijk wilt onderbreken of als u opnieuw

wilt beginnen af te spelen.

PC CAMERAMODUS• U kunt de QUINTEZZ FULL HD DASHCAM + met behulp van de meegeleverde USB-

kabel op uw PC aansluiten. Hiermee kunt u een back-up maken of kunt u de video/ Hiermee kunt u een back-up maken of kunt u de video/foto bestanden op uw PC afspelen.

• Druk op de & knoppen (d-e) om de mode te kiezen en druk dan op OK (c) :- Mass storage (USB mode): dit is een computerinterface tussen een computer

en een digitale camera, die de digitale camera weergeeft als een losse diskdrive die met de computer verbonden is.

- PC Camera: een webcam is een videocamera die beelden in real time naar een computer of een computernetwerk stuurt via USB.

Om de DASHCAM + op uw PC te gebruiken zijn er geen drivers nodig aangezien deze door Windows / Macintosh zelf geïnstalleerd en voorzien zijn in het Windows / Macintosh pakket*.U moet de DASHCAM + als volgt aansluiten:1. Zorg dat de batterij geladen is.2. Maak enkel gebruik van de MEEGELEVERDE USB kabel.3. Zet de DASHCAM AAN.4. Verbind vervolgens de USB kabel met de DASHCAM en dan pas met de PC.5. Kies op de DASHCAM “Mass storage” en druk op de OK-knop (c).6. De driver zal zichzelf nu installeren en onder “Deze computer” op uw bureaublad

zal dan een nieuwe (harde)-schijf aangemaakt zijn en te zien zijn (het kan ook zijn dat er automatisch een venster geopend wordt waarin u kan aangeven hoe u de bestanden wilt bekijken). De PC camera driver zal apart geïnstalleerd worden als PC Camera geselecteerd is.

7. U kunt dan de bestanden zien in een map en deze dubbelklikken om de video te laten afspelen door de standaard Windows Media Player of Apple Quicktime (kunt u eventueel zelf selecteren).

Opmerking:• U kunt ook de micro SD-kaart uit de Dashcam halen en deze in een (ingebouwde)

micro SD-kaart lezer plaatsen van uw PC of een losse micro SD-kaart lezer gebruiken indien u deze zou hebben. Dit gaat sneller en is gemakkelijk in gebruik.

B. INSTELLINGEN MENULet op! Dit menu werkt niet indien de PC Camera en/of Mass Storage modus geactiveerd is.

1. Schakel het toestel in via de meegeleverde autolader of via de reeds opgeladen batterij

2. Druk op M/ (f) tot u de gewenste mode hebt geselecteerd#.

3. Druk op (b) om in het menu te gaan#.4. Druk op de & knoppen (d-e) om

doorheen de submenu’s te scrollen.5. Klik na de selectie op OK (c) om uw keuze

te bevestigen en de instelling op te slaan.6. Druk op (b) om het menu te verlaten.

Bijvoorbeeld: Voor het instellen van datum en tijd, volgt u de volgende stappen:1. Zorg dat de batterij geladen is.2. Zet de DASHCAM AAN (of gebruik hem

icm de auto lader in de auto).3. Druk op (b).4. Druk dan nogmaals op (b).5. Ga dan met de (e) knop naar DATUM &

TIJD (Date & Time).6. Druk op de OK knop (c) .7. U kunt nu met de & knoppen (d-e)

de data wijzigen alsmede de tijd en deze elke keer bevestigen met de OK knop (c). Daarna gaat u uit het menu door op (b) te drukken.

C. SYSTEEMINSTELLINGENLet op! Dit menu werkt niet indien de PC Camera en/of Mass Storage modus geactiveerd is.

1. Schakel het toestel in.2. Druk op (b) om in het menu te gaan wanneer het apparaat in de

opnamemodus staat#.3. Druk op nogmaals op (b) om het instelmenu te selecteren. 4. Druk op de & knoppen (d-e) om doorheen de submenu’s te scrollen.5. Klik na de selectie OK (c) om uw keuze te bevestigen en de instelling op te slaan.6. Druk op (b) om het menu te verlaten.7. De instellingen worden veranderd nadat het toestel opnieuw wordt

opgestart.

PROBLEEMOPLOSSING

Ik kan geen foto of opname maken. → Controleer of de TF-kaart genoeg ruimte heeft of vergrendeld is.

Het toestel stopt automatisch met opnemen.→ Gebruik compatibele hoge-snelheid Micro SD TF kaart met SDHC omwille van de grote HD

videobestanden. De SDHC TF kaart dient klasse 6 of hoger te zijn.

De melding “bestandsfout” verschijnt bij het afspelen van de foto of video.→ De bestanden zijn onvoltooid door een micro SD kaart opslagfout. Gebruik de formatteerfunctie

in het menu van de Dashcam om uw TF-kaart te formatteren.

Mijn opname is onduidelijk.→ Controleer of er geen vuil of vingerafdrukken op de lens staan, maak de lens proper.

Ik krijg een zwart beeld bij het opnemen van lucht of water. → Landschappen met grote contrasten zullen de automatische belichtingsfunctie beïnvloeden,

u kunt de instellingen aanpassen in het menu “Belichting”.

De kleur is niet perfect op een bewolkte dag of in buitenlicht.→ Stel de “Witbalans” functie in op automatisch.

Er staan strepen in mijn beeld.→ Dit heeft te maken met de verkeerde lichtfrequentie, stel deze in op 50 of 60 Hz naargelang

de lokale waarden.

Mijn toestel blokkeert.→ Reset het toestel door de reset knop in te drukken met een scherp object (bijvoorbeeld een

paperclip). → Stel de Dashcam terug in naar de fabriekinstellingen via het menu.

Datum&TijdMM/DD/YYDD/MM/YYYY/MM/DD

Autom. uitschakeling** Uit */ 1 min. / 3 min*/ 1 min. / 3 min/ 1 min. / 3 minAutomatisch uitschakelen bij gebruik op batterij

Taal Engels, Nederlands, Frans, Spaans, Italiaans, Portugees, Tsjechisch, Hongaars, Zweeds, Russisch, Pools, Duits, Turks, Grieks

Hz frequentie 50 Hz / 60 Hz

Schermbeveiliging** Uit */ 3min./ 5min./ 10min.Screensaver bij gebruik op batterij

Scherm draaien Uit / Aan

Formatteren Intern geheugen / Micro SD kaartIndien u problemen zou hebben met uw micro SD-kaart (zoals “memory full”) raden we u aan om uw kaart via dit menu te formatteren��

Standaardinstelling Annuleren / OKTerug naar fabrieksinstellingen

Firmware versie

SUPPORT VOOR KLANTENVoor alle vragen in verband met het product kunt u contact opnemen met [email protected] of kijk op onze website www.quintezz.com voor meer informatie.

GARANTIECopyright © Quintezz. Quintezz is een gedeponeerd handelsmerk van TE-Group NV. Het Quintezz merk staat voor superieure productkwaliteit en uitstekende dienstverlening aan de klanten. Dat is de reden waarom Quintezz voor dit product een garantie van twee (2) jaar, vanaf de originele aankoop van het product, biedt tegen alle materiaal- en verwerkingsfouten. De voorwaarden van deze garantie en de reikwijdte van de aansprakelijkheid van Quintezz in het kader van deze garantie kunnen van onze website op www.quintezz.com worden gedownload.

* Recommended setting# Only works when no recording has been started.

* Aanbevolen instelling# Werkt enkel indien er geen opname gestart is

* Aanbevolen instelling# Werkt enkel indien er geen opname gestart is

db

eg

1

c

a

h

f

j

l

i

k

m

n

ILLUSTRATION I ILLUSTRATION II

2

43 ILLUSTRATION III

Page 2: GB NL QUINTEZZ FULL HD DASHCAM · FULL HD DASHCAM + will now also be charged while recording. ... 7. You can now see all files in the folder and double-click them to watch the videos

VIDEO MENUResolution FHD 1080P

1920x1080 /1080i 144x1080 / 720P 1280x720/ WVGA 848x480 / VGA 640 x480 / QVGA 320x240

Video resolution

Loop Recording * Off / 1Minute / 2 Minutes * / 3 Minutes

Cycle recording: Saving time of each section on SD card

Exposure +2/3 / +1/3 / +0.0 / - 1/3/ - 2/3 / -1.0 / -4/3 / -5/3 / -2.0

ALuminance adjustment

Motion Detection * Off * Automatic recording when movement is detected

On

Audio OffSound recording On

Date stamp OffDate indication while recording

On

G-sensor * OffAdjust gravity accele- ration for activation of the G-sensor

2G4G8G *

Button sound OnOff

GB NL

ILLUSTRATIONS

USER’S MANUALGB NL FR D

DECLARATION OF CONFORMITY

We, the undersigned

Company: TE-GROUP nv

Address: Kapelsestraat 61, 2950 Kapellen - BELGIUM

declare, that the following equipment:

Product Name: Quintezz EC -Q35

Product Type: AC/DC compressor cooler / freezer

Conforms with the following requirements:

EN 60335-2-24: 2003 + A11: 2004 + A1: 2005 + A2: 2007EN 60335-1: 2002 + A11: 2004 + A1: 2004 + A12: 2006 + A2: 2006EN 55014-1: 2006EN 61000-3-2: 2006EN 55014-2: 1997 + A1: 2001EN 61000-3-3: 1995 + A1: 2001 + A2: 2005

Quintezz FULL HD Dashcam+

Dashboard camera

Complies with the essential requirements, which are specified in the directive 2004/108/EC on the approximation of the laws on the Member States relating to electromagnetic compatibility.

This product has been tested against followingstandards and specifications, applying versionsvalid on June 2013:EN 55022:2010EN 55024:2010

Hereby,

------------------- Manual/FULL HD-Dashcam/09-13/V02 ---------------------Copyright©Quintezz

QUINTEZZ FULL HD DASHCAM +

INTRODUCTIONCongratulations on your purchase. Please read all instructions carefully before using your device. You can use the QUINTEZZ FULL HD DASHCAM + inside your car to record your drives and dangerous situations or accidents on the road while driving.

PACKAGE CONTENTS See illustration I1. Camera DVR unit

a. POWER : Turn device on/off (Press shortly to turn the device on. Press and hold to shut it off when not connected to power source) + press shortly to turn on/off the IR LED lights

b. : Enter/exit the menuc. OK : Confirm the selected optiond. : Go up in the menu or zoom in digitally x 1/2/3/4 e. : Go down in the menu or zoom out digitally x 1/2/3/4f. M/ : Mode switching between VIDEO recording/PHOTO recording/ PLAYBACK/

Browse imagesg. USB connectionh. 1.5” TFT LTPS screeni. Microphonej. Reset : If your device stops working (crashes), you can reset your device and

turn it on again. k. Micro SD TF card slotl. IR LED’sm. Lensn. Speaker

2. Mounting bracket with suction cup3. 12/24V DC 5V – 700 mA Car charger4. USB connection cable

G-SENSOR FUNCTION:When gravity acceleration reaches 8 g (1g = 9.8m/s), the camera will automatically store the video and protect it against being auto-deleted. You can change this setting manually if desired.

SOS FUNCTION:Press M/ (f) shortly to immediately save and lock the video while it’s being recorded. shortly to immediately save and lock the video while it’s being recorded. On the micro-SD card, this file will be tagged with SOSxxxxx.

CHARGING• The device has a built-in Li-ion rechargeable battery that has to be fully charged

and discharged 4 times on battery function to activate the maximum capacity of the battery. Charging time is about 2 hours maximum.

• The status of the battery is indicated by following symbols:

100% 70% 25% 0% The red indication light turns on while charging and turns off once the battery has

been fully charged. • The camera records for approximately 1h when not connected to any power source.

Charging options:Connect the device to a computer/laptop using the USB connection cable (4). OR ORPlug the device into the included car charger (3) for use in car or truck.As soon as the car engine turns on, the device will start recording. The QUINTEZZ FULL HD DASHCAM + will now also be charged while recording. When the car charger is disconnected from the unit, the QUINTEZZ FULL HD DASHCAM + will shut down automatically and save the files.

Caution: • With low battery, the QUINTEZZ FULL HD DASHCAM + will enter a protection mode.

Please charge the battery to ensure you can turn on the device and continue to use it.• QUINTEZZ FULL HD DASHCAM + can only be used with the supplied 5V (12/24V) car

power supply. Any other power supply may cause errors and/or permanent damage to the device.

USING MICRO SD CARD (TF) (not included, optionally available) See illustration II• Insert your micro SD card into the SD slot until it clicks into place. • To remove the micro SD Card, press the card lightly. It is partially ejected allowing

you to pull the card out.• With no card in the SD slot, the display will inform you with an ‘Insert micro SD

card’ message.Note:1. We recommend using a 8GB SDHC micro card (or higher) with class 10, 15 MB/s

writing (or higher).2. Without SD card, the device will NOT work�Without SD card, the device will NOT work�3. If the micro SD card is inserted in a wrong way (difficult to insert), it may damage

the device and the memory card. 4. The device will automatically set up the micro SD-card after it’s been inserted.

VIDEO * IMAGE *

MICROSD CARD

1920xFHD 1080p 1440 x1080i 1280x 720p 4032x3024

12MP 2592x1944

5MP2048X1536

3MP 32GB 225 min 185 min 252 min 12624 31600 4831616 GB 112 min 92 min 126 min 6312 15080 241588GB 56 min 46 min 63 min 3156 7540 12079

* Depends on the brand, model and type (class) of the micro SD card�� Data are appro�imate�� �o rightsmicro SD card�� Data are appro�imate�� �o rights SD card�� Data are appro�imate�� �o rights reserved for these data’s��

MOUNTINGSee illustration III• Slide the QUINTEZZ FULL HD DASHCAM + (1) into the mounting bracket (2). • Moisten the suction cup, place it on the inside of your windshield and close the cup

using the lever. We recommend placing the QUINTEZZ FULL HD DASHCAM + on the right side of the rear view mirror.

• Adjust the bracket by using the adjustment knobs. • Make sure the camera is mounted horizontal for the best view. • Connect the car charger (3) to the car lighter for power.

USE OF THE QUINTEZZ FULL HD DASHCAM +A. MODESAttention: This menu will not work if PC Camera and/or Mass Storage mode is activated. VIDEO RECORDING MODEA camera icon would be shown in the upper left corner of the display��• When the QUINTEZZ FULL HD DASHCAM + is connected to your cars power

supply, it will start Video recording as soon as the car engine is started. It will stop recording after the car is stopped.

• When the QUINTEZZ FULL HD DASHCAM + is not connected to the cars power supply, press the POWER button (a), and press the OK button (c) to start recording. The unit will automatically be in Video recording mode. Press OK (c) again to stop recording and save the files automatically.

• Loop recording: During recording, the device will save each video file every 1, 2 or 3 minutes automatically. When the micro SD card is full, the device will delete the oldest video files automatically one by one.

Note: The infrared video recording function can be turned on manually in case of low-light circumstances if necessary. The display will show the following symbol: )

PHOTO MODEA photo icon would be shown in the upper left corner of the display��• Press the M/M/ - button (f) 1x if you want to make pictures instead of recordings. button (f) 1x if you want to make pictures instead of recordings. • Press the OK button (c) every time you want to take a picture.

PLAYBACK MODEA playback icon would be shown in the upper left corner of the display��• For Playback mode, press the M/M/ - button (f) 2x. button (f) 2x. • Use the & buttons (d-e) to scroll through the recordings.buttons (d-e) to scroll through the recordings.• Press OK (c) to start playback. • Press the OK button (c) to pause or begin playback again.OK button (c) to pause or begin playback again.button (c) to pause or begin playback again.

PC CAMERA MODE• You can connect the QUINTEZZ FULL HD DASHCAM + to your PC by using the supplied

USB cable. You can also use it to backup or playback files/videos on your PC.• Press the & buttons (d-e) to choose the mode and then press OK (c):buttons (d-e) to choose the mode and then press OK (c):

- Mass storage (USB mode) : It is a computer interface between a computer andMass storage (USB mode) : It is a computer interface between a computer and : It is a computer interface between a computer and a digital camera which shows the digital camera as a removable disk drive attached to the computer.

- PC Camera: A webcam is a: A webcam is a video camera which feeds its images in real time to a computer or computer network via USB.

You don’t need to install drivers to use the HD DASHCAM + with your PC because these are already installed by Windows/Macintosh in the Windows/Macintosh pack. You should connect the HD DASHCAM + as following :1. Make sure the battery is charged.2. Only use the SUPLLIED USB cable.3. Turn the DASHCAM ON.4. Connect the USB cable with the DASHCAM + before connecting it to the PC. 5. Select “MASS STORAGE”on the DASHCAM and press the OK button (c).6. The driver will now install itself and in the folder “My computer” on your desktop

you will see a new (hard)disk (it is possible that a window will appear in which you can indicate how you would like to view the files). The PC camera driver will be installed separately when PC Camera is selected.

7. You can now see all files in the folder and double-click them to watch the videos using the standard Windows Media Player or Apple Quicktime (you can select yourself).

Note:• You can also remove the micro SD card from the DASHCAM and place it in a (built-

in) micro SD card reader from your PC or a separate micro SD card reader if you have one. This is a quick and easy-to-use solution.

B. MENU SETTINGSAttention: This menu will not work if PC Camera and/or Mass Storage mode is activated.

1. Power on the unit with the supplied car charger or by using a fully charged battery.

2. Press M/M/ (f) until you have selected (f) until you have selected the desired mode#.

3. Press (b) to enter the menu#.4. Press & buttons (d-e) to scrollbuttons (d-e) to scroll

through the submenu’s.5. After selection, click OK (c) to confirm

and save the setting.6. Press (b) to exit the menu.

For example: to set date and time, please follow these steps:1. Make sure the battery is charged. 2. Turn the DASHCAM ON (or use it with

the car charger in the car).3. Press (b).4. Press (b) again. 5. Use the (e) button to go to DATE &

TIME.6. Press the OK button (c). 7. You can now use the & buttonsbuttons

(d-e) to change the date and time and confirm each setting by pressing the OK button (c). You can exit this menu by pressing the (b) button.

C. SYSTEM SETTINGSAttention: This menu will not work if PC Camera and/or Mass Storage mode is activated.

1. Power on the unit.2. Press (b) to enter the menu when the device is in recording mode#.3. Press (b) again to select the set up menu.4. Use the & buttons (d-e) to scroll through the submenu’s.buttons (d-e) to scroll through the submenu’s.5. After selection, click OK (c) to confirm and save the setting.6. Press (b) to exit.7. The new settings will be applied after restart of the device.

* Recommended setting# Only works when no recording has been started.

PHOTO MENU

Timer Single / 2S Timer / 5S Timer / 10S Timer

Resolution 12MP 4032x3024 / 10MP 3648 x2736 / 8MP 3264 x 2448 / 5MP 2592x1944 / 3MP 2048x1536/ 2MP HD 1920x1080 / VGA 640x 480 / 1.3MP 1280x960

Burst OffBurst mode On

Quality Fine / Normal / Low

Sharpness Strong / Normal / Soft

White Balance Auto* / Daylight / Cloudy / Tungsten / Fluorescent

Color Standard / Black & White / Sepia

ISO Auto* / 100 / 200 / 400

Exposure +2/3 / +1/3 / +0.0 / - 1/3 / - 2/3 / -1.0 / -4/3 / -5/3 / -2.0Luminance adjustment

Anti-Shaking * Off On *

Quick Review Off / 2 Seconds / 5 SecondsDate Stamp Off / Date / Set Date/TimeDate indication on photo

PLAYBACK MENUDelete Delete One / Delete AllFile removal

Protect Lock One / Unlock One / Lock All/ Unlock AllFile locking

Set Date/TimeMM/DD/YYDD/MM/YYYY/MM/DD

Auto Power Off * Off */ 1Minute / 3 MinutesAutomatic power off when use on battery

Language English, Dutch, French, Spanish, Italian, Portuguese, Czech, Hungarian, Swedish, Russian, Polish, German, Turkish, Greek

HZ frequency 50 Hz / 60 Hz

Backlight Saver * Off */ 3 Minutes/ 5 Minutes/ 10 Minutes*/ 3 Minutes/ 5 Minutes/ 10 Minutes/ 3 Minutes/ 5 Minutes/ 10 MinutesScreensaver when use on battery

Screen rotation Off / On

Format Internal memory / Micro SD cardIn case of problems with your micro SD-card (f��e��� “Memory full”) we recommend formatting your card from this menu��

Default Setting Cancel / OKReset to factory settings

Firmware version

TROUBLE SHOOTINGI cannot take pictures or record a video.→ Check if the TF-card has enough free storage left and make sure it is unlocked.

The device does not stop recording automatically .→ Use the compatible high-speed Micro SD TF card with SDHC because of big HD video data.

The SDHC TF card needs to be class 6 or higher.

I get the message “file error” while watching pictures or playing a recorded video.→ The files have not been saved correctly due to a micro SD card storage error. Please use the

format option in the menu of your device to reformat your TF-card.

My recordings are blurry.→ Make sure the lens is clean. Remove dust or finger prints if necessary.

I only see a black screen while trying to record air or water scenery.→ Scenes with big contrasts will influence your automatic image control function. You can adjust

the settings manually in the “Exposure” menu.

The colour is not perfect on cloudy day or in natural daylight.→ Reset the “White Balance” option to automatic.

Cross-stripe interference in image.→ This is caused by an incorrect light frequency. Please adjust the setting to 50 or 60 Hz

depending on the local power supply values.

My device keeps crashing.→ Reset the device by pressing the reset button with a sharp object (f.ex. a paperclip).→ Reset the Dashcam back to original factory settings through the menu in the device.

CUSTOMER SUPPORTFor all product related questions, please contact: [email protected] or consult our website www.quintezz.com for more information.

GUARANTEECopyright © Quintezz. Quintezz is a registered trademark of TE-Group NV. The Quintezz brand stands for superior product quality and outstanding customer service. That is why Quintezz warrants this product against all defects in material and workmanship for a period of two (2) years from the date of original purchase of the product. The conditions of this guarantee and the extent of responsibility of Quintezz under this guarantee can be downloaded from our website: www.quintezz.com.

VIDEO MENUResolutie FHD 1080P

1920x1080 / 1080i 144x1080 / 720P 1280x720 / WVGA 848x480 / VGA 640 x480 / QVGA 320x240

Videoresolutie

Loop Opname*Uit / 1 min. / 2 min. * / 3 min.

Cyclusopname: tijd van ieder deel op de micro SD-kaart opslaan

Belichting +2/3 / +1/3 / +0.0 / - 1/3 / - 2/3 / -1.0 / -4/3 / -5/3 / -2.0

Manuele instelling helderheid

Bewegingsdetect.* Uit* Automatisch opnemen wanneer er beweging wordt gedetecteerd

Aan

Audio UitOpname geluid Aan

Datumstempel UitWeergave datum op de opname

Aan

G-sensor * UitInstelling zwaartekracht versnelling voor activatie G-sensor

2G4G8G *

Bieptoon AanUit

FOTO MENU

Timer Eén / Timer 2 sec. / Timer 5 sec. / Timer 10 sec.

Resolutie 12MP 4032x3024 / 10MP 3648x2736 / 8MP 3264 x 2448 / 5MP 2592x1944 / 3MP 2048x1536 / 2MP HD 1920x1080 / VGA 640x480 / 1.3MP 1280x960

Serie UitBurst mode Aan

Kwaliteit Fijn / Normaal / Laag

Scherpte Sterk / Normaal / Zwak

Witbalans Auto* / Daglicht / Bewolkt / Tungsten / Fluorescerend

Kleur Standaard / Zwart/wit / Sepia

ISO Auto* / 100 / 200 / 400

Belichting +2/3 / +1/3 / +0.0 / - 1/3 / - 2/3 / -1.0 / -4/3 / -5/3 / -2.0Instelling helderheid

Anti-schok* UitAan *

Snel bekijken Uit / 2 sec. / 5 sec.Date Stamp Uit / Datum / Datum&tijdWeergave datum op de foto

AFSPEELMENUWissen 1 wissen / Alles verwijderenVerwijdering bestand

Beveiligen 1 vergrend. / 1 ontgrend. / Alles vergrend. / Alles ontgrend.

Vergrendeling bestand

QUINTEZZ FULL HD DASHCAM +

INLEIDINGGefeliciteerd met uw aankoop. Gelieve alle instructies aandachtig te lezen voordat u het apparaat gebruikt. U kunt de QUINTEZZ FULL HD DASHCAM + in uw auto gebruiken om uw ritten en gevaarlijke situaties en ongevallen op de weg tijdens het rijden op te nemen.

INHOUD VAN HET PAKKET Zie afbeelding I1. Camera DVR-systeem

a. AAN/UIT: apparaat in- en uitschakelen (1x kort indrukken om aan te zetten apparaat in- en uitschakelen (1x kort indrukken om aan te zetten en ingedrukt houden om uit te schakelen wanneer het apparaat niet op een stroombron aangesloten is) + IR LED lampen aan- en uitschakelen (kort indrukken)

b. : in/uit het menu gaanc. OK: de geselecteerde optie bevestigen de geselecteerde optie bevestigend. : omhoog in menu en voor 1/2/3/4 x digitaal inzoomen omhoog in menu en voor 1/2/3/4 x digitaal inzoomene. : omlaag in menu en voor 1/2/3/4 x digitaal uitzoomenf. M/ : mode omschakelen tussen VIDEO-opnamen/FOTO-opnamen/AFSPELEN/

Foto’s bekijkeng. USB aansluitingh. 1.5” TFT LTPS schermi. Microfoonj. Reset : als het toestel blokkeert (crash), kunt u een reset uitvoeren om het

toestel te herstartenk. Micro SD TF kaartsleufl. IR LED’sm. Lensn. Luidspreker

2. Monteerhouder met zuignap3. 12/24V DC 5V – 700 mA autolader4. USB-aansluitkabel

G-SENSOR FUNCTIE:Wanneer de zwaartekracht versnelling 8g (1g = 9.8m/s) bereikt, zal de camera auto-matisch de beelden als niet-verwijderbaar opslaan. U kunt deze instelling zelf wijzigen indien gewenst.

SOS FUNCTIE:Druk kort op M/ (f) om de huidige video-opnamen onmiddellijk beveiligd op te slaan tijdens de opname. Op de micro-SD kaart wordt dit bestand aangeduid als SOSxxxxx.

OPLADEN• In het apparaat is een oplaadbare Li-ion batterij ingebouwd die 4 keer volledig

opgeladen en ontladen moet worden op batterij-functie om de maximale capaciteit van de batterij te activeren. De oplaadtijd bedraagt ongeveer 2 uur (maximum). De oplaadtijd bedraagt ongeveer 2 uur (maximum).

• De status van de batterij wordt aangegeven door de volgende symbolen:

100% 70% 25% 0%

Het rode indicatielampje brandt tijdens het opladen en gaat uit als de batterij volledig opgeladen is.

• De camera werkt max. 1 uur wanneer hij niet op een stroombron aangesloten is.

Opties voor het opladen:Sluit het apparaat met behulp van de USB-aansluitkabel (4) op een computer/laptop aan.OFPlug het apparaat in de meegeleverde autolader (3) voor gebruik in een auto/vrachtwagen.Zodra de motor van de auto wordt opgestart, begint de camera beelden op te nemen. De QUINTEZZ FULL HD DASHCAM + wordt nu tijdens het opnemen ook opgeladen. Wanneer de autolader van het toestel wordt losgekoppeld, valt de QUINTEZZ FULL HD DASHCAM + automatisch uit en slaat hij alle bestanden op.

Opgelet: • Wanneer het batterijlaadniveau laag is, gaat de DASHCAM + in de beschermingsstand

staan. Laad de batterij op, zodat u het apparaat zeker kunt inschakelen en verder kunt gebruiken.

• De DASHCAM + kan enkel gebruikt worden met de bijgeleverde 5V (12/24V) autolader anders kan er een defect optreden.

GEBRUIK VAN EEN MICRO SD-KAART (TF) (niet meegeleverd, optioneel te verkrijgen)Zie afbeelding II• Schuif uw micro SD-kaart in de micro SD-sleuf tot ze op haar plaats klikt. • Druk licht op de micro SD-kaart als u ze uit de sleuf wilt halen. De kaart wordt dan

gedeeltelijk uitgeworpen, waarna u ze gemakkelijk kunt uitnemen.• Op het display staat het bericht ‘Micro SD kaart insteken’ wanneer er geen kaart in

de micro SD-sleuf zit.

Opmerking: 1. Wij adviseren het gebruik van een 8GB micro SDHC-kaart (of hoger) met klasse

10, 15 MB/s schrijven (of hoger).2. Zonder SD-kaart, werkt het toestel NIET�3. Als de micro SD-kaart verkeerd wordt ingevoerd (moeilijk om in te voeren), bestaat

het risico dat het apparaat en de geheugenkaart beschadigd raken. 4. Het apparaat stelt de micro SD-kaart in nadat ze werd ingevoerd.

VIDEO * IMAGE *

MICROSD CARD

1920xFHD 1080p 1440 x1080i 1280x 720p 4032x3024

12MP 2592x1944

5MP2048X1536

3MP 32GB 225 min 185 min 252 min 12624 31600 4831616 GB 112 min 92 min 126 min 6312 15080 241588GB 56 min 46 min 63 min 3156 7540 12079

* Afhankelijk van het merk, model en “klasse”type van de micro SD-kaart en bij benadering.

MONTAGEZie afbeelding III• Schuif de QUINTEZZ FULL HD DASHCAM + (1) op de monteerhouder (2). • Maak de zuignap vochtig, plaats ze op de binnenkant van de voorruit en sluit de

zuignap met behulp van de hendel. We adviseren u om de QUINTEZZ FULL HD DASHCAM + rechts van de achteruitkijkspiegel op te stellen.

• Stel de beugel in met behulp van de steldraaiknoppen. • Monteer de camera horizontaal, zodat u het beste zicht krijgt. • Sluit de autolader (3) op de sigarettenaansteker in de auto aan voor de nodige

stroom.

GEBRUIK VAN DE QUINTEZZ FULL HD DASHCAM +

A.MODILet op! Dit menu werkt niet indien de PC Camera en/of Mass Storage modus geactiveerd is.

VIDEO-OPNAMEMODUSIn de linkerbovenhoek van het display wordt een camerapictogram weergegeven��• Wanneer de QUINTEZZ FULL HD DASHCAM + op de voeding van uw auto is

aangesloten, begint hij videobeelden op te nemen zodra de motor van de auto wordt opgestart. Hij stopt met opnemen zodra de auto tot stilstand is gekomen. Hij stopt met opnemen zodra de auto tot stilstand is gekomen.

• Wanneer de QUINTEZZ FULL HD DASHCAM + niet op de voeding van uw auto is aangesloten, moet u op de ON/OFF-knop (a) en daarna op de OK-knop (c) drukken om beelden te beginnen op te nemen. Het toestel staat automatisch in de video-opnamemodus. Druk nog eens op OK (c) als u de opname wilt stoppen en de bestanden automatisch wilt opslaan.

• Opnemen in een lus: tijdens het opnemen slaat het apparaat ieder videobestand elke 1,2 of 3 minuten automatisch op. Wanneer de micro SD-kaart vol is, wist het toestel de oudste videobestanden automatisch 1 voor 1.

Opmerking: In slechte belichtingsomstandigheden kan u de infrarood video-opnamefunctie zelf inschakelen wanneer nodig. U zult dan in het scherm dit symbool zien staan:

FOTOMODUSIn de linkerbovenhoek van het display wordt een fotopictogram weergegeven��• Druk 1 keer op de M/ -knop (f) als u foto's in plaats van videobeelden wilt nemen. • Druk op de OK-knop (c) telkens wanneer u een foto wilt nemen.

AFSPEELMODUSIn de linkerbovenhoek van het display wordt een afspeelpictogram weergegeven��• Druk 2 keer op de M/ -knop (f) als u de afspeelmodus kiest. • Met behulp van de & knoppen (d-e) kunt u doorheen de opnamen scrollen.• Druk op OK (c) om met het afspelen te beginnen. • Druk op de OK knop (d) als u de opname tijdelijk wilt onderbreken of als u opnieuw

wilt beginnen af te spelen.

PC CAMERAMODUS• U kunt de QUINTEZZ FULL HD DASHCAM + met behulp van de meegeleverde USB-

kabel op uw PC aansluiten. Hiermee kunt u een back-up maken of kunt u de video/ Hiermee kunt u een back-up maken of kunt u de video/foto bestanden op uw PC afspelen.

• Druk op de & knoppen (d-e) om de mode te kiezen en druk dan op OK (c) :- Mass storage (USB mode): dit is een computerinterface tussen een computer

en een digitale camera, die de digitale camera weergeeft als een losse diskdrive die met de computer verbonden is.

- PC Camera: een webcam is een videocamera die beelden in real time naar een computer of een computernetwerk stuurt via USB.

Om de DASHCAM + op uw PC te gebruiken zijn er geen drivers nodig aangezien deze door Windows / Macintosh zelf geïnstalleerd en voorzien zijn in het Windows / Macintosh pakket*.U moet de DASHCAM + als volgt aansluiten:1. Zorg dat de batterij geladen is.2. Maak enkel gebruik van de MEEGELEVERDE USB kabel.3. Zet de DASHCAM AAN.4. Verbind vervolgens de USB kabel met de DASHCAM en dan pas met de PC.5. Kies op de DASHCAM “Mass storage” en druk op de OK-knop (c).6. De driver zal zichzelf nu installeren en onder “Deze computer” op uw bureaublad

zal dan een nieuwe (harde)-schijf aangemaakt zijn en te zien zijn (het kan ook zijn dat er automatisch een venster geopend wordt waarin u kan aangeven hoe u de bestanden wilt bekijken). De PC camera driver zal apart geïnstalleerd worden als PC Camera geselecteerd is.

7. U kunt dan de bestanden zien in een map en deze dubbelklikken om de video te laten afspelen door de standaard Windows Media Player of Apple Quicktime (kunt u eventueel zelf selecteren).

Opmerking:• U kunt ook de micro SD-kaart uit de Dashcam halen en deze in een (ingebouwde)

micro SD-kaart lezer plaatsen van uw PC of een losse micro SD-kaart lezer gebruiken indien u deze zou hebben. Dit gaat sneller en is gemakkelijk in gebruik.

B. INSTELLINGEN MENULet op! Dit menu werkt niet indien de PC Camera en/of Mass Storage modus geactiveerd is.

1. Schakel het toestel in via de meegeleverde autolader of via de reeds opgeladen batterij

2. Druk op M/ (f) tot u de gewenste mode hebt geselecteerd#.

3. Druk op (b) om in het menu te gaan#.4. Druk op de & knoppen (d-e) om

doorheen de submenu’s te scrollen.5. Klik na de selectie op OK (c) om uw keuze

te bevestigen en de instelling op te slaan.6. Druk op (b) om het menu te verlaten.

Bijvoorbeeld: Voor het instellen van datum en tijd, volgt u de volgende stappen:1. Zorg dat de batterij geladen is.2. Zet de DASHCAM AAN (of gebruik hem

icm de auto lader in de auto).3. Druk op (b).4. Druk dan nogmaals op (b).5. Ga dan met de (e) knop naar DATUM &

TIJD (Date & Time).6. Druk op de OK knop (c) .7. U kunt nu met de & knoppen (d-e)

de data wijzigen alsmede de tijd en deze elke keer bevestigen met de OK knop (c). Daarna gaat u uit het menu door op (b) te drukken.

C. SYSTEEMINSTELLINGENLet op! Dit menu werkt niet indien de PC Camera en/of Mass Storage modus geactiveerd is.

1. Schakel het toestel in.2. Druk op (b) om in het menu te gaan wanneer het apparaat in de

opnamemodus staat#.3. Druk op nogmaals op (b) om het instelmenu te selecteren. 4. Druk op de & knoppen (d-e) om doorheen de submenu’s te scrollen.5. Klik na de selectie OK (c) om uw keuze te bevestigen en de instelling op te slaan.6. Druk op (b) om het menu te verlaten.7. De instellingen worden veranderd nadat het toestel opnieuw wordt

opgestart.

PROBLEEMOPLOSSING

Ik kan geen foto of opname maken. → Controleer of de TF-kaart genoeg ruimte heeft of vergrendeld is.

Het toestel stopt automatisch met opnemen.→ Gebruik compatibele hoge-snelheid Micro SD TF kaart met SDHC omwille van de grote HD

videobestanden. De SDHC TF kaart dient klasse 6 of hoger te zijn.

De melding “bestandsfout” verschijnt bij het afspelen van de foto of video.→ De bestanden zijn onvoltooid door een micro SD kaart opslagfout. Gebruik de formatteerfunctie

in het menu van de Dashcam om uw TF-kaart te formatteren.

Mijn opname is onduidelijk.→ Controleer of er geen vuil of vingerafdrukken op de lens staan, maak de lens proper.

Ik krijg een zwart beeld bij het opnemen van lucht of water. → Landschappen met grote contrasten zullen de automatische belichtingsfunctie beïnvloeden,

u kunt de instellingen aanpassen in het menu “Belichting”.

De kleur is niet perfect op een bewolkte dag of in buitenlicht.→ Stel de “Witbalans” functie in op automatisch.

Er staan strepen in mijn beeld.→ Dit heeft te maken met de verkeerde lichtfrequentie, stel deze in op 50 of 60 Hz naargelang

de lokale waarden.

Mijn toestel blokkeert.→ Reset het toestel door de reset knop in te drukken met een scherp object (bijvoorbeeld een

paperclip). → Stel de Dashcam terug in naar de fabriekinstellingen via het menu.

Datum&TijdMM/DD/YYDD/MM/YYYY/MM/DD

Autom. uitschakeling** Uit */ 1 min. / 3 min*/ 1 min. / 3 min/ 1 min. / 3 minAutomatisch uitschakelen bij gebruik op batterij

Taal Engels, Nederlands, Frans, Spaans, Italiaans, Portugees, Tsjechisch, Hongaars, Zweeds, Russisch, Pools, Duits, Turks, Grieks

Hz frequentie 50 Hz / 60 Hz

Schermbeveiliging** Uit */ 3min./ 5min./ 10min.Screensaver bij gebruik op batterij

Scherm draaien Uit / Aan

Formatteren Intern geheugen / Micro SD kaartIndien u problemen zou hebben met uw micro SD-kaart (zoals “memory full”) raden we u aan om uw kaart via dit menu te formatteren��

Standaardinstelling Annuleren / OKTerug naar fabrieksinstellingen

Firmware versie

SUPPORT VOOR KLANTENVoor alle vragen in verband met het product kunt u contact opnemen met [email protected] of kijk op onze website www.quintezz.com voor meer informatie.

GARANTIECopyright © Quintezz. Quintezz is een gedeponeerd handelsmerk van TE-Group NV. Het Quintezz merk staat voor superieure productkwaliteit en uitstekende dienstverlening aan de klanten. Dat is de reden waarom Quintezz voor dit product een garantie van twee (2) jaar, vanaf de originele aankoop van het product, biedt tegen alle materiaal- en verwerkingsfouten. De voorwaarden van deze garantie en de reikwijdte van de aansprakelijkheid van Quintezz in het kader van deze garantie kunnen van onze website op www.quintezz.com worden gedownload.

* Recommended setting# Only works when no recording has been started.

* Aanbevolen instelling# Werkt enkel indien er geen opname gestart is

* Aanbevolen instelling# Werkt enkel indien er geen opname gestart is

db

eg

1

c

a

h

f

j

l

i

k

m

n

ILLUSTRATION I ILLUSTRATION II

2

43 ILLUSTRATION III