gas badge pro datasheet
TRANSCRIPT
GasBadge ProSingle Gas DetectorBuilt to the highest quality and reliability standards, GasBadge Pro provides a lifetime of gas hazard protection with more features than any other single gas detector available
Smart sensor swap-out to suit your application Interchangeable “smart” sensors enable the GasBadge Pro to be quickly
adapted to detect unsafe levels of oxygen or toxic gases (see gases analysed)
Powerful audible alarm Standard loud (95 dB) audible alarm, ultra-bright visual alarm that can
be seen from all directions, and a vibration alarm alert users if a
hazardous condition exists.
Simple operation to configure TWA and STELIts simple and intuitive four-button navigation allows easy access to
setup, operation and calibration functions. Standard STEL and TWA
readings, and data logging of up to one year of survey data are featured
along with an event-logger that records the past 15 alarm events.
KEYBENEFITS• Interchangeable “smart” sensors
monitor oxygen or any one of any
toxic gases
• Lifetime warranty
• Users can configure the display for
their own requirements
• The direct gas reading display is
the largest and most visible
display for single gas instruments
The simple button operation teamed with the smart sensor swap out makes the perfect solution for low cost detection
“ “
H2S
GASESANALYSED
O2NO2 CO NH3
Cl2 ClO2 PH3 SO2 HCN
TECHNICALSPECIFICATION
GENERAL • Instant response airborne leak detection
• Compensation for background noise
• 60 dB range, no site set-up required
• Large detection area
PERFORMANCE • Temperature range: -40º to 60ºC (-40º to 140ºF), typical
• Humidity range: 0-99% RH (non-condensing), typical
PHYSICAL• Dimensions: 9.4 cm x 5.08 mm x 2.79 mm (3.7” x 2” x 1.1” )
• Weight: 85 g (3 oz.)
• Enclosure: Rugged, water-resistant polycarbonate shell
with protective concussion proof overmold. RFI resistant.
APPROVALS • UL/cUL: Class I, Groups A,B,C,D T4; Class II, Groups E,F,G;
Class I, Zone 0, AEx ia IIC T4
• CSA: Class I, Groups A B C D T4; Ex ia IIC T4
• ATEX: Ex ia I/Ex ia IIC T4; Equipment Group and Category:
I M1/II 1G
• IECEx: Ex ia I/IIC T4
• ANZEx: Ex ia I/IIC T4
• INMETRO: BR - Ex ia IIC T4
• KOSHA: Ex ia I/IIC T4
• IP Rating: Third-party certified IP64
POWER• Battery runtime: User replaceable 3V, CR2 Lithium battery,
2,600 hour run time, typical
MEASURINGRANGES
• CO: 0-1,500 ppm in 1 ppm increments
• H2S: 0-500 ppm in 0.1 ppm increments
• O2: 0-30% by volume in 0.1% increments
• NO2: 0-150 ppm in 0.1 ppm increments
• SO2: 0-150 ppm in 0.1 ppm increments
• NH3: 0-500 ppm in 1 ppm increments
• Cl2: 0-100 ppm in 0.1 ppm increments
• ClO2: 0-1 ppm in 0.01 ppm increments
• PH3: 0-10 ppm in 0.01 ppm increments
• HCN: 0-30 ppm in 0.1 ppm increments
• H2: 0-2,000 ppm in 1 ppm increments
ORDERINGINFO
• IPRO601: Carbon Monoxide (CO)
• IPRO602: Hydrogen Sulphide (H2S)
• IPRO603: Oxygen (O2)
• IPRO604: Nitrogen Dioxide (NO2)
• IPRO605: Sulphur Dioxide (SO2)
• IPRO606: Ammonia (NH3)
• IPRO607: Chlorine (Cl2)
• IPRO608: Chlorine Dioxide (ClO2)
• IPRO609: Phosphine (PH3)
• IPRO610: Hydrogen Cyanide (HCN)
• IPRO611: Carbon Monoxide (CO)
• IPRO612: Hydrogen (H2)
Cert No. 996ISO 9001
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: [email protected] W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com