garment finishing hot stream hotstream ......garment finishing mono t1 mono t2 mono t3 mono t4 air...
TRANSCRIPT
HOTSTREAM : SUBSONIC ECO TUNNEL
HOT STREAM : SUBSONIC eco tunnel
Heart of the Lapauw HOT STREAM is the narrow dry chamber. When the air stream enters the 100 mm wide dry chamber, it accelerates in a calculated manner. This causes turbulences that shakes the garments as they pass through the dry zone. The result is a mechanical action that enhances the dewrinkling and assures a first class finish, irrespective of the garment type.
The narrow dry chamber also brings another advantage: The garments pass shoulder to shoulder through the chamber, leaving them fully exposed to the airstream. Needless to say that this provides optimal drying conditions.
HOT STREAM : subsonic ECO tunnel
Thanks to the narrow dry chamber, the HOT STREAM retains the hot air much better than the standard wide passage tunnel finisher, while High Density insulation covers the full length of the dry chamber in order to minimize the amount of heat escaping from the side.This results in an energy consumption up to 20% lower than standard wide passage tunnel finisher models.
Whatever the fabric…
Cotton overalls or poly/cotton T-shirts? The HOT STREAM handles any fabric.The programmable speed of the hot air stream, allows you to fine-tune HOT STREAM to the type of garments you pass through. That’s why our customers favor our Tunnel finisher for a wide range of garments: Including, thick cotton overalls, private garments of nursing home residents, Chefs Wear, Uniforms and many more.
Lapauw International NV · Oude Ieperseweg 139 · 8501 Kortrijk-Heule · Tel: +32 (0) 56 35 42 95
N.V./S.A.
HOT STREAM
GARMENT FINISHING
Lapauw International NV · Oude Ieperseweg 139 · 8501 Kortrijk-Heule · Tel: +32 (0) 56 35 42 95
N.V./S.A.
Technical specifications HOT STREAM Mono
Supply voltage 3 x 380-420VAC 50HZ +PE + N / 3 x 440-480VAC 60HZ +PE + N
Heating : Gas or SteamThe HOT STREAM is available with steam heating or gas heating. Both are indirect heating : With steam, the air flows over a steam heated battery. On the gas heated ironers, the flame goes through a closed pipe.
HOT STREAM
GARMENT FINISHING
MONO T1 MONO T2 MONO T3 MONO T4
Air speed hot air stream maximum air speed m³/hr
Programmable4000 8000 12000 16000
Fan motors kW 2 x 2,2 soft start
4 x 2,2 soft start
6 x 2,2soft start
8 x 2,2 soft start
Power suction fan 0,75 0,75 1,5 1,5
Production capacity items/hr ± 150 65/35 poly/cotton
± 350 65/35 poly/cotton
± 450 65/35 poly/cotton
± 600 65/35 poly/cotton
Dimensions
length mm 3768 5032 6290 5772
width mm 1195 1195 1195 1195
height mm 2510 2510 2510 2510
weight kg 1000 1700 2000 2600
Technical specifications HOT STREAM DuoWith the DUO, Lapauw offers high production HOT STREAM with a limited footprint.
DUO T2 DUO T3 DUO T4 DUO T5
Air speed hot air stream maximum air speed m³/hr
Programmable16000 24000 32000 40000
Fan motors kW 8 x 2,2 soft start
12 x 2,2 soft start
16 x 2,2soft start
20 x 2,2 soft start
Power suction fan 1,5 1,5 1,5 2 x 1,5
Production capacity items/hr ± 700 65/35 poly/cotton
± 85065/35 poly/cotton
± 100065/35 poly/cotton
± 120065/35 poly/cotton
Dimensions
length mm 3768 5032 6290 5772
width mm 2390 2390 2390 2390
height mm 2510 2510 2510 2510
weight kg 3400 4000 5200 5800
MONO T1 MONO T2 MONO T3 MONO T4
Gas burner power kW 52 52 90 189
DUO T2 DUO T3 DUO T4 DUO T5
Gas burner power kW 2 x 52 2 x 90 2 x 189 2 x 189