gammblok data sheet
DESCRIPTION
GammBlok Data SheetTRANSCRIPT
SafeRad
SafeRadGammaBlok( Data Sheet
GammaBlok( is manufactured under strict Quality Controls within the requirements of SafeRad Company Operating Procedures and Data Sheets, ensuring a product with consistent density and attenuating value.
GammaBlok( is inert, contains no toxic materials and can be safely handled.
It can be bent and returns to its original shape and can be easily cut using a sharp blade. It is strong, durable, highly elastic and long lasting.
Each piece is individually inspected to assure consistency with specifications.
Typical Attenuation Values
Radiation Half Value Thicknesses have been independently determined for GammaBlok: for common isotopes they are as follows
Se-75
6mm
Ir-192
11mm
Cs-137 14mm
Co-60
28mm
TYPICAL PHYSICAL PROPERTIES
Density
4.99 g/cc
BS903: Part A1:1996Tensile Strength
3.28 Mpa
BS903: Part A2:1995
Tear Strength
13.1 Kn/m
BS903: Part A3:1995
Elongation
451 %
BS903: Part A2:1995
Shore Hardness A
62
BS903: Part A57:1997
COSHH Requirements
Non-Hazardous
Minimum Bend Radius
3mm
Maximum Operating Temperature250C
Minimum Operating Temperature-30C
FIRE TESTS
GammaBlok has been independently fire tested to determine ignitability by direct flame impingement. Test results show that GammaBlok exceeds the requirements of prEN ISO 11925-2 1999.
Sizes Available
GammaBlok can be made to any size or shape required.
Standard sizes available are:
750 mm x 300 mm x 8 mm
600 mm x 200 mm x 15 mm
450 mm x 200 mm x 15 mm
GammaBlok can be made in a range of densities to cover the most arduous attenuation requirements
SafeRad GammaBlok( is resistant to most Chemicals, Scuff Resistant and Abrasion Resistant
Form No PR 038 Rev0