g4 control and management solution for data- centers and computer rooms
TRANSCRIPT
The G4
• Perfect “All Built In” solution for control, management and monitoring computer rooms and data-centers.
• An unique integrated solution that ensures full control of equipments, real time detection of faults and immediate notifications to users.
• Works on LAN/WAN network,
• Includes GSM modem
Features
• Accepts input from up to 5 temperature sensors.
• 8 inputs dry contacts.
• 4 outputs dry contacts.
• RS232 serial connection for power devices (UPS / rectifiers).
• Ethernet line interface 10/100 Base auto detect. Network protocols : TCP/IP, UDP/IP, HTTP, SNMP v2, DNS, PPP, SMTP, TELNET,MODBUS client .
• Internal cellular modem support GPRS/GSM – Dual or Quad band.
•Antenna and SIM card connection.
•
AC Fail
Air Condition stop operationAir condition start operation
ShutdownServers
Motion detector
GPRS/SMS Control and Notification
Leak detectionand notification
High temperature
Smoke detector
Door / Window open
Alarm
Change your point of view
AC Recovered
Wake-upServers
SNMP trap
Server room
Control and monitor of IT equipments
• Reading and analysis information through SNMP of IT equipments like: servers, switches, printers, …
• Features analyzed: CPU load, virtual and physical memory used, used and free space capacity for all SNMP (RFC2790 ) supported equipments.
• Check Availability of equipment by ping requests.
• Automatic shutdown up to 32 servers in UPS AC failure or a critical event defined by user –for more than 32 need additional Gamatronic’s software called “PSM”.
• Wake up servers in the way of “WAKE ON LAN” - (Bios configuration) and wake with delay availability.
• SNMP trap to management centers use SNMP manager like: What‘s Up, HP Open View, CA.
• SNMP restriction to set/get by community and IP – G4 may use as a server/client SNMP.
Monitoring power systems
• G4 performs real time verification of Gamatronic and other UPS’s and power systems manufacturers.
• immediate alarm notification such as:
AC fail, Low battery, on Battery… .
• G4 notifies and operates accordingly:
=> Shutdown server for prevent damage to IT equipments and data bases,
=>send SMS/EMAIL/SNMP trap to relevant users.
Dry contacts
• Work with relays that define the status to normally open/close
• G4 will detect every changes of these states and immediately notify users .
DRY IN:
• 8 dry contacts inputs to receive alarms from different sensors such as: Air conditions, doors, smoke detectors, fire detector ,flood and more.• Contacts can be enable/disable in certain hour during the day according to
user preferences.
DRY OUT:
• 4 dry contacts outputs for remote activation of different devices like:Back up air condition, lamp, alarm, gates and more.
• Contacts can be activated automatically in one of following cases:
1) status’ change of a certain dry contact IN.2) High temperature alarm.3) IT alarm.4) UPS alarm.
Environment Temperature
• G4 can monitor up to 5 temperature measurements sensors (one is provided by default).
• All sensors can be configured with high/low limit ,description name and Hysteresis that prevent falsehood notifications when the sensor is in the limit between the normal and critical temperature.
Control via SMS
• The G4 can send notifications up to 10 mobile phone numbers. These numbers may also have a full control on the unit.
• A “status” SMS command reply a short answer of Fail/OK on following parameters:IT monitoring, environment, dry contacts, UPS .
• All critical commands will require SMS password and a flag authorization in the WEB interface – near all phone number ,
• user can mark the number he wants to authorize full control option.
• User can choose to receive a status notification from G4 from time to time.
Critical commands example:
• Shutdown server, wake up server, change dry contact status (open, close, pulse), get the G4’s IP.
Additional features
• Hardware is not dependent to an external server. • Built- In AJAX based web interface - enables accessibility thru every remote
internet browser.
• Event group- user can define a group of events he wants and refer them to a particular phone target.
• Internal 256 event log available through web server or SNMP.
• GPRS communication: where the LAN/WAN network isn’t accessible.
• Can operates with the Gamatronic “PSM AC UNIVERSAL” software to increase the shutdown target to more than 32 devices.
• Can operates with Gamatronic “GEMSI software” for monitoring several G4 units and other UPS models.
GeMSi Software - Main screen
GeMSi main screen, shows real time status of all regions and sites, alarm counter and direct connection to alarmed unit.
Units in specific site, real time status & name, right click shows all information about the unit.
GeMSi Software