furukawa fttx solution (pdf 10.8mb)
TRANSCRIPT
-
FURUKAWA FTTx SOLUTION
-
1
J380EX P.34
Furukawa Electric has a rich tradition of designing and delivering exceptional, first-to-market optical products and solutions for a wide variety of industries and applications. Today we offer one of the worlds leading FTTx product portfolios, including optical fiber, cable, closure, cabinet, connectivity, tools and related solutions.
Single Family UnitApplication P.5
Drop Cable P.24
J363 P.33
Furukawa Offers FTTx Products for Global Markets
Underground cable
Aerial cable
Underground closure
Aerial closure
ONU
FTTx Solution
J397 P.36
J396L3 P.35
Aerial Closure
PS202 P.50
SplitterDrop Cable
Underground Closure
-
2
Multi Dwelling Unit (Office) Application P.3
Central Office
FTTx Network Solution 1
Highlighted Technology 7
Optical Fiber 9
Optical Fiber Cable 13
Closure, Cabinet and Splitter 31
Closure 33
Cabinet 37
Splitter 50
Optical Connector and Tools 51
Tools (Fusion Splicer / Optical Identifier) 59
C o n t e n t s
OLT
Aerial Cable
Rollable Ribbon Cable P.21SZ-Slotted Core Cable P.19ADSS Cable P.16Loose Tube Cable P.16
Underground Cable
Loose Tube Cable P.15
S-Slotted Core Cable P.17
SZ-Slotted Core Cable P.18
-
3
V-Linx Spool & Play Solution provides fast and easy plug and play installation.Easy plug and play solution provides starting the service quickly and service recovery immediately.
Multi Dwelling Unit (Office) ApplicationV-Linx Spool and Play Solution
V-Linx Combiner P.40V-Linx Terminal P.41 V-Linx FDH P.39
V-Linx Spool and Play Solution P.37
EZ-Bend Cable P.29
Field Installable Connector P.52
Optical Connector Rosette(J428N) P.49
Low Friction Indoor Cable(1 or 2-fiber) P.28
-
4
Direct cabling solution provides flexibility for making network construction upon customer needs in MDU. Splitter can be placed at any point (Termination box in MDU) and fiber splice and connector connection are available at any place.
Multi Dwelling Unit (Office) ApplicationDirect Cabling Solution
Termination Box (J422) P.42
Termination Box E Cabinet-SS P.44
Splitter Module P.46
Splitter (PS202) P.50Accumax P.25
EZ-Bend Cable P.29
Field Installable Connector P.52
Optical Connector Rosette(J428N) P.49
Low Friction Indoor Cable(1 or 2-fiber) P.28
Low Friction Indoor Cable(8-fiber) P.26
-
Pipe/Crown molding
ONU
5
Low friction cable technology provides ease of installation to congested pipe and crown molding.
Single Family Unit Application Standard Solution
Low Friction Indoor Cable P.28
Splicing Box (J425) P.48
Splitter (PS202) P.50 Rollable Ribon Cable mini P.22
1 or 2-fiber Drop Cable P.24
EZ-Bend Cable P.29
Field Installable Connector P.52
Aerial Closure (J397) P.36
Field Installable Connector P.52
Optical Connector Rosette(J428N) P.49
-
Staple
ONU
6
EZ-Bend cable technology provides ease of installation by using the stapling method.
EZ-Bend cable stapled on board
35 quarter turns10 staples
Splicing Box (J425) P.48
EZ-Bend Cable P.29
EZ-Bend Cable P.29
Single Family Unit ApplicationStapling Solution
Optical Connector Rosette(J428N) P.49
-
7
Highlighted Technology
SSW structure cable
Cable height has been reduced by 50% compared with loose tube cables (figure-8 type, 24-fiber cable). The new cables will greatly assist easy installation of aerial cables.
Cable weight has been reduced by 80% compared with loose tube cables (figure-8 type, 24-fiber cable). The new cables can be installed under situations where con-ventional cables can not be installed due to weight limitation.
Furukawa Electric newly launched compact sized and light weight aerial cables which com-pose newly developed Rollable Ribbon fiber. It allows to install high fiber-count aerial cables under situations where wiring conventional type of cables are limited.
Compact Sized & Light Weight Aerial Cables Rollable Ribbon Cable, Rollable Ribbon Cable mini (SSW structure cable)
Central office
Local central office
Indoor/PremisesAccess
Supporting wire
Cable part
Joint
0
5
10
15
20
25
30
0 50 100 150 200 250
Cab
le h
eigh
t (m
m)
Fiber count
Comparison of cable height
Loose Tube Rollable Ribbon Cable Rollable Ribbon Cable mini(Figure-8) (SSW) (SSW)
(Figure-8) (SSW) (SSW)
050
100150200250300350400
0 50 100 150 200 250
Cab
le w
eigh
t (kg
/km
)
Fiber count
Comparison of cable weight
Loose Tube Rollable Ribbon Cable Rollable Ribbon Cable mini
Rollable Ribbon Cable P.21 Rollable Ribon Cable mini P.22
-
8
Optical fiber ribbon which optical fibers are bonded in intervals. The fiber ribbon separation is surpris-ingly easy since it needs only unsticking the bonded portion. Also, the ribbons can be rolled and the rolled ribbons can be stranded. This new technol-ogy has realized extremely compact sized and light weight high fiber-count cables.
Fiber Ribbon for Easy Separating Rollable Ribbon
Stacked ribbons(conventional ribbon)
Rolled-up ribbons (rollable ribbon)
Rollable Ribbon (schematic view) P.23
Indoor cables which cable sheath has low friction property based on Furukawas original cable sheath material technology. Friction coefficient of the cable has been reduced by over 75% *1 and over 30 pieces of the cable can be installed into a pipe *2. The new cables will assist to drastically reduce time spent on cable installation in MDU.*1) compared with conventional indoor cables *2) In case of 1-fiber cable. Based on Furukawas standard wiring model
Cables for Pushing Installation Low Friction Indoor Cable
Pushing installation
Pipe
Furukawas standard wiring model
Pipe diameter: 22mm (inner)Pipe length: 20mNumber of pipe bending: 5
Low Friction Indoor Cable(1 or 2-fiber) P.28
Low Friction Indoor Cable(8-fiber) P.26
-
9
Furukawa Electric Group designs and manufactures high performance optical fibers offering
superior performance and reliability.
AllWave Zero Water Peak (ZWP) Fiber offers increased transmission capacity by full spectral
bandwidth, and the lowest loss in metro/access applications.
AllWave FLEX ZWP Fiber can transmit full spectrum with low bending loss, and have good re-
liability for long-term in premise and indoor applications as well as access applications.
AllWave FLEX + ZWP Fiber maintains even lower bending loss at a bending radius of 7.5 mm
keeping its full spectrum feature, and is suitable for premises and indoor applications.
AllWave FLEX Max Fiber offers outstanding bend performance to a 5 mm radius for demand-
ing in-building and connectivity applications.
Application
Central office
Local central office
OLT ONU
Indoor/Premises
Access Metro
Product name Features Intl. standard Typical applications Page
AllWave ZWP Fiber
Full band spectrum Low attenuation loss 11
AllWave FLEX ZWP Fiber
Low loss at 10 mm bend radius Full band spectrum 11
AllWave FLEX + ZWP Fiber
Low loss at 7.5 mm bend radius Full band spectrum 12
AllWave FLEX Max Fiber Low loss at 5 mm bend radius 12
Indoor/Premises
Indoor/Premises
Indoor/PremisesAccess
Access Metro
G.657. A2
G.657. A1
G.657. B3
G.652. D
Optical Fiber
Op
tical
Fib
er
-
10
Product specifications AllWave ZWP Fiber
AllWave FLEX ZWP Fiber
AllWave FLEX + ZWP Fiber
AllWave FLEX Max Fiber
Phitsical characteristicsCladding diameter (mm) 125.0 0.7 125.0 0.7 125.0 0.7 125.0 0.7
Cladding non-circularity (%) 0.7 0.7 0.7 % 0.7 %
Core / cladding concentricity error (offset)(mm) 0.5 (Typical: < 0.2) 0.5 (Typical: < 0.2) 0.5 (Typical: < 0.2) 0.5 (Typical: < 0.2)
Coating diameter (uncolored) (mm) 235-250 235-250 235-250 237 - 247
Coating / cladding concentricity error (offset)(mm) 12 12 12 12
Tensile proof test strain (kpsi) 100 (0.69 GPa) 100 (0.69 GPa) 100 (0.69 GPa) 100 (0.69 GPa)
Coating strip force (N) 1.3 - 8.9 1.3 - 8.9 1.3 - 8.9 1.3 - 8.9
Standard reel length (km) up to 50.4 up to 50.4 up to 50.4 up to 50.4
Optical characteristicsAttenuation (dB/km)
at 1310 nm [Maximum / Typical] [ 0.34 / 0.32] [ 0.35 / 0.34] [ 0.35 / 0.34] 0.35
at 1383 nm [Maximum / Typical] [ 0.31 / 0.28] [ 0.31 / 0.28] [ 0.31 / 0.28] 0.35
at 1490 nm [Maximum / Typical] [ 0.24 / 0.21] [ 0.24 / 0.21] [ 0.24 / 0.21] 0.24
at 1550 nm [Maximum / Typical] [ 0.21 / 0.19] [ 0.21 / 0.19] [ 0.21 / 0.19] 0.21
at 1625 nm [Maximum / Typical] [ 0.24 / 0.20] [ 0.24 / 0.20] [ 0.24 / 0.20] 0.23
Macrobending attenuation (dB)
The maximum attenuation with bending does not exceed the specified values under the following deployment conditions:
30 mm radius, 100 turns at 1550 nm 0.05
at 1625 nm 0.05
25 mm radius, 100 turns at 1310 nm 0.05
at 1550 nm 0.05 0.01
at 1625 nm 0.05
16 mm radius, 1 turn at 1550 nm 0.05
15 mm radius, 10 turns at 1550 nm 0.2 0.03
at 1625 nm 0.5 0.1
10 mm radius, 1 turn at 1550 nm 0.2 0.1 0.03
at 1625 nm 0.5 0.2 0.10
7.5 mm radius, 1 turn at 1550 nm 0.5 0.05
at 1625 nm 1.0 0.15
5 mm radius, 1 turn at 1550 nm 0.10
at 1625 nm 0.25
Chromatic dispersion
Zero dispersion wavelength 0 (nm) 1302 1322 1302 1322 1302 1322 1302 1322
Dispersion slope at 0 (ps / (nm2km)) 0.090 (Typical: 0.087) 0.092 (Typical: 0.088) 0.092 (Typical: 0.088) 0.092
Mode field diameter (mm)
at 1310 nm 9.2 0.4 8.5 9.3 8.4 9.2 8.3 9.1
at 1550 nm 10.4 0.5 9.4 10.4 (Typical) 9.4 10.4 (Typical) 9.2 10.4
Cutoff wavelngth cc (nm) 1260 1260 1260 1260
Polarization mode dispersion (PMD) (ps/ ) *1
Fiber PMD Link Design Value (LDV) *2 0.06 (Typical: < 0.02) 0.06 (Typical: < 0.02) 0.06 (Typical: < 0.02) 0.06 (Typical: < 0.02)
Individual fiber PMD 0.1 0.1 0.1 0.1
Group refractive index
at 1310 nm 1.467 1.467 1.467 1.467
at 1550 nm 1.468 1.468 1.468 1.468
Environmental characteristicsAttenuation increase during / after aging at 1310 nm, 1550 nm, and 1625 nm (dB / km)
Temperature cycling (-60C to +85C) 0.05 0.05 0.05 0.05
High temperature aging (+85C 2C) 0.05 0.05 0.05 0.05
Temperature & humidity cycling (-10C to +85C, 95% RH) 0.05 0.05 0.05 0.05
Water immersion (+23C 2C) 0.05 0.05 0.05 0.05
*1 As measured with low mode coupling (LMC) technique in fiber form, value may change when cabled. Check with your cable manuacturer for specific PMD limits in cable form.
*2 The PMD link design value complies with IEC 60794-3, September 2001 (N = 20, Q = 0.01%). Details are described in IEC 61282-3 TR Ed.2, October 2006.
* Those are typical characteristics of uncabled optical fiber. Some characteristics may change after cabling. The characteristics of cabled fiber shall be confirmed for each cable.
Furukawa Electric reserves the right to improve, enhance and modify the features and specification of this product without prior notification.
G.657. A2G.657. A1 G.657. B3 G.652. D Op
tical Fiber
-
11
AllWave ZWP Fiber
AllWave Zero Water Peak (ZWP) Fiber is ideally designed for use in metro and access networks due to its su-perior performance low optical loss across the entire wavelength range from 1260 nm to 1625 nm, tightest available geometry, low splice loss, and low polarization mode dispersion (PMD). Combined with complete compatibility with embedded fiber base, these features provide ultimate network design flexibility and enable cost-effective solutions to help maximize return on investment.
Features and Benefits
Low optical loss across the entire spectrum from 1260 nm to 1625 nm, providing a 50 percent increase in us-able spectrum, enabling 16-channel CWDM as well as DWDM support
The water peak defect has been removed for low, sta-ble loss performance in the 1400 nm band
Ultra-low fiber PMD allows speed and distance up-grades
The industrys tightest geometric control for lowest splice loss and improved connectorization perfor-mance
Macrobend performance superior to the G.652.D stan-dard
1.2
0.9
0.6
0.3
0
CWDM 16 channels(ITU-T G.694.2)
AllWave ZWPFiber
ConventionalSM Fiber
Wavelength (nm)
AllWave ZWP Fiber has over100 nm more spectrum
AllWave ZWP Fiber has lower & stable loss by removingthe water peak defect
Loss
(dB
/km
)
1300 1400 1500 1600
}
Access Metro
AllWave FLEX ZWP Fiber
AllWave FLEX Zero Water Peak (ZWP) Fiber is the first Zero Water Peak G.652.D fiber to offer optimized bend performance for Fiber-to-the-x (FTTx), enterprise networks, or any application where small bend diameters may be encountered. Fully compliant to the new ITU-T G.657.A1 specification, AllWave FLEX ZWP Fiber is completely compatible with all conventional single-mode fibers. AllWave FLEX ZWP Fiber maintains very low bending loss across the full spectrum of wavelengths from 1260 nm to 1625 nm, while ensuring long-term fiber strength and reliability. It can be coiled into a 10 mm radius loop with 0.5 dB incurred loss at 1625 nm and 0.2 dB incurred loss at 1550 nm-five times better bend performance than conventional single-mode and leading Low Water Peak (LWP) Fibers.
Outstanding macrobend performance
100 turns on a 25 mm radius mandrel
0.01 dB @ 1550 nm 0.05 dB @ 1625 nm 100 turns on a 15 mm
radius mandrel 0.2 dB @ 1550 nm 0.5 dB @ 1625 nm 1 turn on a 10 mm radius
mandrel 0.2 dB @ 1550 nm 0.5 dB @ 1625 nm
Features and Benefits
Saves space, time, and money through improved bend performance, even for L-Band wavelengths up to 1625 nm: added loss 0.5 dB (1625 nm) and 0.2 dB (1550 nm) at 10 mm radius
Easier to install, handle, and store in space-constrained applications such as FTTx and premises networks
Bend-optimized design for tight, low loss bends without risking fiber strength and long-term reliability
Tight geometry for very low splice loss and improved connectorization perfor-mance with G.652.D embedded base
Fully compatible with all conventional single-mode fiber international standards including G.657.A1 and G.652.D
Zero Water Peak fiber provides a 50% increase in usable optical spectrum en-abling 16-channel CWDM and DWDM support
Indoor/PremisesAccess G.657. A1
G.652. D
Op
tical
Fib
er
-
12
AllWave FLEX + ZWP Fiber
AllWave FLEX+ ZWP Fiber is the first Zero Water Peak (ZWP) fiber that meets and exceeds both ITU-T G.657.A2 and G.652.D specifications. This fiber offers enhanced bend performance ideally suited for in-building and connectivity applications and full compatibility and compliance with the installed base of conventional G.652.D single-mode fibers. It is an excellent choice for Fiber-to-the-Home (FTTH), cell sites, enterprise networks, or any application where small bend diameters may be encountered.AllWave FLEX+ ZWP Fiber maintains very low bending loss across the full spectrum of wavelengths from 1260 nm to 1625 nm, while ensuring long-term fiber strength and reliability. It can be coiled into a 7.5 mm ra-dius loop with 0.5 dB incurred loss at 1550 nm and 1.0 dB incurred loss at 1625 nm.
Features and Benefits
Fully compliant with the ITU G.657.A2 standard; also meets all requirements of G.657.B2 and G.652.D
Designed for in-building, cabinet, cell site, and central office applications Bend optimized design for tight, low loss bends without risking fiber strength
and long-term reliability Tight geometry for very low splice loss and improved connectorization perfor-
mance Excellent fusion splice performance using standard recipes Zero Water Peak fiber provides a 40% increase in usable optical spectrum en-
abling 18-channel CWDM support and much greater DWDM capacity
Outstanding macrobend performance
10 turns on a 15 mm radius mandrel
0.03 dB @ 1550 nm 0.1 dB @ 1625 nm 1 turn on a 10 mm radius
mandrel 0.1 dB @ 1550 nm 0.2 dB @ 1625 nm 1 turn on a 7.5 mm radius
mandrel 0.5 dB @ 1550 nm 1.0 dB @ 1625 nm
Indoor/Premises G.657. A2
AllWave FLEX Max Fiber
AllWave FLEX Max Fiber offers outstanding bend performance to a 5 mm radius for demanding in-building and connectivity applications. Compatible to and compliant with the installed base of conventional G.652.D single-mode fibers, it is designed for Fiber-to-the-Home (FTTH), enterprise networks,or any application where very small bend diameters may be encountered. The fiber meets and exceeds both ITU-T G.657.B3 and G.652.D recommendations.AllWave FLEX Max Fiber is designed to minimize bending loss for demanding connectivity and high power applications, especially where fiber bend radius may be unmanaged. It can be coiled into a 5 mm radius loop with 0.10 dB incurred loss at 1550 nm and 0.25 dB incurred loss at 1625 nm. The fiber maintains ex-tremely low bending loss across the entire optical spectrum.
Features and Benefits
Full spectrum fiber provides a 40% increase in usable optical spectrum, en-abling 18-channel CWDM support and much greater DWDM capacity
Fully compliant with both the ITU-T G.657.B3 and G.652.D standard recommen-dations
Designed for in-building, enterprise, cell site, and central office applications Designed to reliably support low-loss 5 mm radius bends Tight geometry for very low splice loss and improved connectorization perfor-
mance Excellent fusion splice performance
Outstanding macrobend performance
1 turn on a 10 mm radius mandrel
0.03 dB @ 1550 nm 0.10 dB @ 1625 nm 1 turn on a 7.5 mm radius
mandrel 0.05 dB @ 1550 nm 0.15 dB @ 1625 nm 1 turn on a 5 mm radius
mandrel 0.10 dB @ 1550 nm 0.25 dB @ 1625 nm
Indoor/Premises G.657. B3
Op
tical Fiber
-
13
FTTx Network deployment offers a significant challenge to the network provider.
The time proven technologies as well as innovative optical fiber cables offered by Furukawa Elec-
tric is the result of exceptional optical fibers protected by ground-breaking packaging that ensures
superior performance and durability.
We offer comprehensive solution for passive products including the variety of optical fiber cables
from central office to each FTTx subscriber realizing the FTTx network construction.
Aerial cable
Drop cable
Drop cable
Indoor cableLow friction indoor cable
Indoor cableEZ-Bend cable
Undergroundcable
ONU
OLT
Optical Fiber Cable
Op
tical
Fib
er C
able
-
14
Application Product name Standard cable construction FeatureIntl. standard of applicable fiber Page
Underground
Loose Tube Cablefor Direct Buriedfor Duct
Adopted worldwideG.652. D
G.657. A115
S-Slotted Core Cablefor Duct
Helical slotted core cable High density fiber count Mass fusion splice
G.652. D
G.657. A117
SZ-Slotted Core Cable for Duct
Easy mid-span access High density fiber count Available mass fusion splice QS Ribbon
G.652. D
G.657. A118
Aerial
Figure 8 Cable(Loose Tube Cable for Aerial)
Suitable for aerial installationG.652. D
G.657. A116
ADSS Cable(Loose Tube Cable for Aerial)
Suitable for aerial installation Consists of all dielectric elements
G.652. D
G.657. A116
SZ-Slotted Core Cable(SSW structure)
Suitable for aerial installation Easy mid-span access QS Ribbon
G.652. D
G.657. A119
Rollable Ribbon Cable(SSW structure)
Suitable for aerial installation Easy mid-span access Small diameter and light weight Rollable Ribbon
G.657. A1 21
Rollable Ribbon Cable mini(SSW structure)
Suitable for rural area Easy mid-span access Small diameter and light weight Rollable Ribbon
G.657. A1 22
Drop Drop Cable Easy jacket removal Self support structureG.657. A1
G.657. A224
Riser for MDU
ACCUMAX Distribution Cable
Easy handling Faster, easier cable preparation
G.652. D
G.657. A125
Low Friction Indoor Cable(8-fiber)
Low friction cable 8 individual fiber Easy jacket removal
G.657. A1 26
Indoor
Indoor Cable Easy jacket removal G.657. A1
G.657. A227
Low Friction Indoor Cable(1 or 2-fiber)
Low friction cable Easy jacket removal Pushing Installation available
G.657. A1
G.657. A228
EZ-Bend Cable Allows small bending radius Allows copper-like installationG.657. B3 29
Op
tical Fiber C
able
-
Underground cable
15
Loose Tube Cable
Innovative loose tube cable designs from Furukawa Electric fulfill the need for every situation, and
provide excellent performance. Our complete portfolio offers cables with increased fiber density
and easy deployment for a wide range of installations, including duct, aerial (Lashed and self-sup-
porting), and direct buried.
Time proven technologies with a proven history
Available with full range of fiber types
Fulfilling the needs for every situation (Duct, aerial, direct buried, and indoor application)
Dry core technology for a more craft-friendly, jelly-free cable core, resulting easy of handling
Available for metallic or non-metallic central strength member
Proven loose tube design provides outstanding optical fiber protection
Armored structure provides outstanding mechanical strength and enhanced rodent protection
Ripcord allows easy jacket removal
Features and Benefits
Construction
Double jacket (Direct buried)
Single jacket (Duct)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elementsCorrugated steel armorInner PE jacketOuter PE jacketDryBlock water blocking material
Ripcord(s)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elements
Outer PE jacketDryBlock water blocking material
Ripcord(s)
6 mm suspension wire
Filler rodAdditional strength elements
Dielectric central strength member
PE jacketFilled loose buffer tube
DryBlock water blocking material
Ripcord(s)
Central strength member
Buffer tubeOptical fibers
Central member jacket
Inner jacket sheath strength elements
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elementsCorrugated steel armorInner PE jacketOuter PE jacketDryBlock water blocking material
Ripcord(s)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elements
Outer PE jacketDryBlock water blocking material
Ripcord(s)
6 mm suspension wire
Filler rodAdditional strength elements
Dielectric central strength member
PE jacketFilled loose buffer tube
DryBlock water blocking material
Ripcord(s)
Central strength member
Buffer tubeOptical fibers
Central member jacket
Inner jacket sheath strength elements
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
G.652. D
G.657. A1
Underground Aerial
Op
tical
Fib
er C
able
-
Aerial cable
16
Specification
Item Specification for underground cable
Fiber count 2-60 61-72 73-96 97-120 121-144 145-216 217-240 241-288
Outer diameter (mm)
Double jacket 12.9 13.6 15.3 17.0 18.6 18.3 19.1 20.9
Single jacket 10.1 10.7 12.5 14.1 15.7 15.4 16.2 18.0
Weight (kg/km)Double jacket 162 182 223 280 318 306 351 388
Single jacket 77 88 116 149 186 173 195 234
Maximum pulling tension (N) 2700
Minimum bendingradius (mm)
Double jacket 129 136 153 170 186 183 191 209
Single jacket 101 107 125 141 157 154 162 180
Item Specification for aerial cable
Fiber countFigure 8 2-60 62-72 74-96
ADSS 2-30 31-288
Outer diameter (mm)
Figure 8 1120.3 12.224 1425.9
ADSS Based on maximum pulling tension
Weight (kg/km)Figure 8 311 336 372
ADSS Based on maximum pulling tension
Maximum pulling tension (N)
Figure 8 2700
ADSS Based on customers requirement
Minimum bendingradius (mm)
Figure 8 203 240 259
ADSS 10cable diameter
Figure 8
ADSS
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elementsCorrugated steel armorInner PE jacketOuter PE jacketDryBlock water blocking material
Ripcord(s)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elements
Outer PE jacketDryBlock water blocking material
Ripcord(s)
6 mm suspension wire
Filler rodAdditional strength elements
Dielectric central strength member
PE jacketFilled loose buffer tube
DryBlock water blocking material
Ripcord(s)
Central strength member
Buffer tubeOptical fibers
Central member jacket
Inner jacket sheath strength elements
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elementsCorrugated steel armorInner PE jacketOuter PE jacketDryBlock water blocking material
Ripcord(s)
Gel-filled buffer tube
Central strength member
Optical fibers
Central member jacketAdditional strength elements
Outer PE jacketDryBlock water blocking material
Ripcord(s)
6 mm suspension wire
Filler rodAdditional strength elements
Dielectric central strength member
PE jacketFilled loose buffer tube
DryBlock water blocking material
Ripcord(s)
Central strength member
Buffer tubeOptical fibers
Central member jacket
Inner jacket sheath strength elements
Outer PE jacket
DryBlock water blocking material
Ripcord(s)
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Op
tical Fiber C
able
-
17
Optical fiber Color coating
Ribbon coatingWidth
Thickness
S-Slotted Core Cable
Helical slotted (S-slotted) core cable is designed for feeder
cable in underground duct application.
Either 4-fiber or 8-fiber ribbons are accommodated into the
grooves, reducing the splicing time during the installation.
High density fiber count - Up to 1000-fiber counts are available Mass fusion splice - Reduces the splicing time Totally dry core structure enhances the installation workability Proven slotted core design provides outstanding optical fiber protection Available with full range of fiber types Cable structure is customizable upon the request
Features and Benefits
Cross Sectional View of Fiber Ribbon
Specification
Fundamental Construction
4-fiber ribbon
8-fiber ribbon
Item 4-fiber ribbon 8-fiber ribbon
Fiber count 4 8
Ribbon coating(m)
Material UV curable acrylate
Width 1100100 2100100
Thickness 32050
Identification Color coating
Underground
Structure of Core
Example of cross sectional view
4-fiber ribbon300-fiber type 1000-fiber type
Central strength member
S-slotted coreWrappingRipcordJacket
8-fiber ribbon
Central strength member
S-slotted core WrappingRipcordJacket
Item Specification
Fiber ribbon type 4-fiber ribbon 8-fiber ribbon
Fiber count 4 - 40 44 - 100 104 - 200 204 - 300 304 - 400 408 - 600 608 - 1000
Outer diameter (mm) 9.5 11.5 15.5 19 19.5 22.5 28
Weight (kg/km) 80 110 180 275 290 400 580
Maximum pulling tension (N) 1570 1570 1930 2560 3270 4070 4070
Minimum bending radius (mm) 95 115 155 190 195 225 280
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
G.652. D
G.657. A1
Op
tical
Fib
er C
able
-
18
SZ-Slotted Core Cable
SZ-slotted core cable is designed for feeder cable in under-
ground duct application and/or mid-span access (mid-span
cable branch), realizing the ease of FTTx network construc-
tion. Either 4-fiber or 8-fiber ribbons are accommodated into
the grooves, reducing the splicing time during the installa-
tion.
Easy mid-span access High density fiber count - Up to 800-fiber counts are
available Mass fusion splice - Reduces the splicing time Totally dry core structure enhances the installation work-
ability
Proven slotted core design provides outstanding optical fiber protection
Available with full range of fiber types Cable structure is customizable upon the request
Features and Benefits
Cross Sectional View of Fiber Ribbon
Specification
Fundamental Construction
4-fiber ribbon
8-fiber ribbon
Optical fiber Color coating
Ribbon coatingWidth
Thickness
Item 4-fiber ribbon 8-fiber ribbon
Optical fiber count 4 8
Ribbon coating(m)
Material UV curable acrylate
Width 1100100 2100100
Thickness 32050
Identification Color coating
Underground
Cable core structure
The ribbon is easily taken off from the slotted core at the any point of the network (mid-span access).
Example of cross sectional view
4-fiber ribbon200-fiber type 640-fiber type
Central strength member
SZ-slotted core WrappingRipcordJacket
8-fiber ribbonCentral strength member
SZ-slotted core WrappingRipcordJacket
Item Specification
Fiber ribbon type 4-fiber ribbon 8-fiber ribbon
Fiber count 4-24 28 - 60 64 - 100 104 - 200 204 - 300 304 - 400 408 - 640 648 - 800
Outer diameter (mm) 9 10.5 13 16.5 21 20.5 23 28.5
Weight (kg/km) 65 85 115 185 305 260 360 510
Maximum pulling tension (N) 950 1240 1930 2560 3270 3270 5540 5540
Minimum bending radius (mm) 90 105 130 165 210 205 230 285
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
G.652. D
G.657. A1
Op
tical Fiber C
able
-
19
SZ-Slotted Core Cable for Aerial(SSW structure)
SZ-Slotted Core Cable for Aerial is designed especially for
aerial application with enhancing the mid-span accessibility.
Furthermore, this cable has a slack between the cable and
self supporting wire, possessing the ability to reduce the ten-
sion that applies to cable from the environmental conditions.
Designed especially for aerial application. Easy mid-span access Slack between the cable and self supporting wire Totally dry core structure enhances the installation workability Proven slotted core design provides outstanding optical fiber protection Available with full range of fiber types Up to 400-fiber counts are available
Mid-span access is easily conducted
by instruction shown in right figure.
Self-supporting wire will still maintain
the cable properties after the mid-span
access.
Features and Benefits
SSW Structure for Mid-Span Access
Specification
SZ-slotted core cableSelf-supporting wire
SZ-slotted coreFiber ribbon
Drop cable
Cut the joints which fixbetween main cable and supporting wire
Item SpecificationFiber ribbon type 4-fiber ribbon 8-fiber ribbon
Fiber count 4-24 28-60 64-100 104-200 204-300 308-400
Supporting wireCount 7 7 7 7 7 7
Wire diameter (mm) 1.8 2 2 2 2 2
Diameter of cable part (mm) 9 10.5 13.5 17 21 21
Height of overall cable (mm) 20.5 22.5 25.5 29 33 33
Weight (kg/km) 230 285 330 400 505 460
Maximum pulling tension (N)Cable part 630 820 1290 1710 2180 2180
Supporting wire 6100 7540 7540 7540 7540 7540
Minimum bending radius (mm)Dynamic: 410Static: 205
Dynamic: 450Static: 225
Dynamic: 510Static: 225
Dynamic: 580Static: 290
Dynamic: 660Static: 330
Dynamic: 660Static: 330
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
G.652. D
G.657. A1
Aerial
Op
tical
Fib
er C
able
-
20
QS Ribbon(for SZ-Slotted Core Cable)
QS Ribbon (Quick Separate Ribbon) is easily separated into
individual fibers with the associated tools, realizing the ease
of mid-span accessibility. This technology allows single
drop application without any influence to other fibers inside
this ribbon. The QS Ribbon will fusion splice to standard
ribbon using current technology. This ribbon is accommo-
dated in SZ-slotted core cable.
Able to separate into individual fiber with using associated tools Able to splice with standard 4-fiber ribbon Designed for mid-span branch joint QS Ribbon is offered with SZ-slotted core cable design
Features and Benefits
Example of the Construction
Aerial
4-fiber ribbon
Separate only required fiber
Only required fiber will be cut from 4-fiber ribbon,
other remaining fibers could be used at next point.
Separate only required fiber
Spliced to drop cable
4-fiber ribbon
Drop cable
Cable (e.g SZ-slotted core cable)
QS Ribbon separating tool: QS101(option)
G.652. D
G.657. A1
Op
tical Fiber C
able
-
21
Rollable Ribbon Cable combines good features of ribbon
fiber and single fiber. It was developed with the concept of
easy handling (small size and light weight) and enabling
easy mid-span branching. The diameter is 30% smaller and
the weight is 50% lighter than conventional aerial cable (SZ-
Slotted Core Cable for Aerial).
Smaller diameter and lighter weight due to using Rollable Ribbon and not using slot spacer Non slotted rod structure, like center core cable, and Rollable Ribbon make the cable size small-
er and save space comparing to the conventional ribbon slotted core cable Rollable Ribbon is especially adopted to mass fusion splice as standard ribbon It has slack between the cable and the supporting wire to reduce wind pressure
Features and Benefits
G.657. A1Aerial
Specification
Item Specification
Fiber ribbon type 4-fiber Rollable Ribbon
Fiber count 24 40 60 100 200
Cable core construction 4-fiber ribbon x 6 4-fiber ribbon x 10 20-fiber unit x 3 20-fiber unit x 5 20-fiber unit x 10
Supporting wireCount 7 7 7 7 7
Wire diameter (mm) 1.4 1.4 1.4 1.4 1.4
Strength member 0.7mm steel wire x 2
Diameter of cable part (mm) 9 9 9.5 10.5 12
Height of overall cable (mm) 17.5 17.5 18 18.5 20.5
Weight (kg/km) 165 165 170 180 200
Maximum pulling tension (N)
Cable part 392 392 392 392 392
Supporting wire 1960 1960 1960 1960 1960
Minimum bending radius (mm) Dynamic: 250Static: 300Dynamic: 250Static: 300
Dynamic: 250Static: 300
Dynamic: 250Static: 300
Dynamic: 250Static: 300
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Rollable Ribbon Cable(SSW structure)
Compact Sized & Light Weight Aerial Cables
Op
tical
Fib
er C
able
-
22
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Rollable Ribbon Cable mini is the cable reduced the dimen-
sions and weight for easier handling. This cable includes
Rollable Ribbon which is especially adopted to mass fusion
splice. This cable is small fiber count cable and is suitable
for rural area.
Rollable Ribbon Cable mini is small diameter and light weight 24 fibers aerial cable Rollable Ribbon is especially adopted to mass fusion splice as standard ribbon Rollable Ribbon Cable mini has slack between the cable and the supporting wire to reduce wind
pressure Using customized sheath removing tool, the sheath can be easily removed and we can access
the ribbon fibers at mid-span
Features and Benefits
Specification
Item Specification
Fiber count 24
Ribbon fiber 4-fiber Rollable Ribbon x 6
Supporting wire (mm) Steel wire : 2.6Strength member (mm) Steel wire : 0.5 x 2Cable dimension (WxH mm) 4x10
Weight (kg/km) 60
Maximum pulling tension (N) 700 (390 for cable part )
G.657. A1Aerial
Supporting wire
Strength member
Rollable Ribbon
Protector
Sheath
Sheath Removing
Sheath Removing Tool Clamp the cable and slide the tool on the sheath
The sheath is cut into 4 pieces and fibers come off naturally
Rollable Ribbon Cable mini(SSW structure)
Compact Sized & Light Weight Aerial Cables
Op
tical Fiber C
able
-
23
Rollable Ribbon has Advanced Quick Separation mecha-
nism for single fiber separation. In Rollable Ribbon, indi-
vidual fibers are partly bonded to each other in a interval.
Because of this structure, Rollable Ribbon can be separat-
ed to individual fibers much more easily than conventional
ribbon fibers with no special tool.
Rollable Ribbon can be separated to individual fibers at the end of the cables much more easily by hand than conventional ribbon fibers.
Rollable Ribbon can be spliced to conventional ribbon fibers (standard encapsulated ribbon or QS Ribbon) by ribbon to ribbon splice using conventional ribbon splicer
Rollable Ribbon is flexible in width direction and can be even rolled. This realizes high fiber density cable
Features and Benefits
G.657. A1Aerial
Schematic illustration
Rollable Ribbon
Op
tical
Fib
er C
able
-
24
Drop Cable
Drop cable is designed for last-one-mile in the FTTx net-
work, enhancing the accessibility to the fiber and maximizes
the installation workability.
Time proven technologies with long sup-plied record
Easy jacket removal without special tools Self support structure Compact cable size
Available with flame retardant jacket Available from 1 to 8-fiber counts
Features and Benefits
Specification
Drop
1-fiber 2-fiber 4-fiber ribbon 24-fiber ribbon
Supporting wire
Optical fiber
Strength member
5 m
m
2 mm 2 mm
2 mm 2 mm
5 m
m
6 m
m
6 m
m
Item Specification
Cable type Drop cable
Fiber count 1 2 4 8
Cable dimension (WxH mm) 2x5 2x6
Supporting wire (mm) 1.2
Strength member(mm)
Metallic Steel wire: 0.4Non-metallic FRP: 0.5
Weight (kg/km) 20 25
Maximum pulling tension (N) 690
Minimum bending radius (mm)
With supporting wire 240
Without supporting wiremetallic Dynamic: 30 Static: 15 Dynamic: 50
Static: 50non-metallic Dynamic: 50 Static: 15
Standard length (m) 500
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
G.657. A1
G.657. A2
Op
tical Fiber C
able
-
25
ACCUMAX Distribution Cable
ACCUMAX fiber optic distribution, Low Smoke Zero Halo-gen (LS0H) cables have the flexibility to handle virtually any application between the building entrance and the desktop in most environments from office to factory floor. ACCUMAX LS0H, non lead cable is especially suitable for installation in riser shafts, above drop ceilings, under raised floors, or in conduits. This robust cable is available in a variety of fiber counts and offers all the advantages associated with the ACCUMAX cable product family including easier, faster, and lower installation cost.
Easy handling Faster, easier cable preparation Cable fiber counts are 2 to 144 Various fiber types are available Flame testing proved that ACCUMAX LS0H cables meet the IEC60332-3C and UL 1666 stan-
dards Smoke tests prove that ACCUMAX LS0H cables meet the IEC601034-2 standard The ACCUMAX cable design eliminates both the extra steps required to remove the jacket and
the risk of broken fibers. Each flexible riser rated jacket or unit can be ringed and slipped off with a simple tool, no ripcords or razor blades are required
Small diameter, lightweight cables occupy less space in trays and conduits, reduce loads, and contribute to greater efficiency during installation
Features and Benefits
Cross Sectional View
Specification
Outer jacket (LS0H)
Color coded unit tube
Central organizer
Tight buffer fiber
Aramid yam
Item Specification
Single tube Multi tube
Fiber count 2 4 6 8 12 18 24 18 24 36 48 72 96 144
Outer diameter (mm) 4.0 4.4 5.0 5.4 6.0 14.8 14.8 14.8 14.8 14.1 20.4 20.4 22.4 23.9
Unit fiber count 6 12
Weight (kg/km) 14.3 17.1 22.5 28.5 30.8 48 82 171 166 163 313 332 528 458
Maximum pulling tension (N) 1223 1334 2224 2700 4445
Minimum bending radius (mm) 40 44 50 54 60 79 86 147 141 204 223 238
*This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.*We can adapt the cable specification to LS0H, Riser, Plenum upon customer request.
G.652. D
G.657. A1
Riser for MDU
Op
tical
Fib
er C
able
-
26
Item Specification
Cable type Indoor cable
Fiber type G.657.A1
Fiber diameter (m) 250Fiber count 8
Cable dimension (WxH mm) 2.8 x 4.2
Strength member Steel wire
Weight (kg/km) 15
Maximum pulling tension (N) 200
Minimum bending radius (mm) Dynamic: 165, Static: 50
Standard length (m) 400
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Specification
Low Friction Indoor Cable (8-fiber) is designed for MDU ap-
plication in the FTTx network especially where the duct is
congested with existing cable. Feature of compact size and
low friction sheath allows easy installation. Low Friction In-
door Cable is suitable for vertical wiring.
Features and Benefits
Construction
G.657. A1
Reduce friction coefficient over 75% *1
Allows pushing installation High flame retardant cable for MDU network LS0H (Low-Smoke Zero Halogen) cable*1 Compared to conventional indoor cable
2.8mm
4.2m
m
Low friction sheath
Strength member
Optical fiber
Low Friction Indoor Cable (8-fiber)
Riser for MDU
Cables for Pushing Installation
Op
tical Fiber C
able
-
27
Indoor Cable
Indoor cable is designed for premise application in the
FTTx network enhancing the accessibility to the fiber and
maximizes the installation workability.
Time proven technologies with long supplied record Easy jacket removal without special tools Compact cable size Available with flame retardant jacket Available from 1 to 8-fiber counts
Features and Benefits
Specification
Indoor
1-fiber
Optical fiber
Strength member
2 mm 2 mm2 mm 2 mm
3 mm
2-fiber 4-fiber ribbon 24-fiber ribbon
3 mm
4 mm
4 mm
Item Specification
Cable type Indoor cable
Fiber count 1 2 4 8
Cable dimension (WxH mm) 23 24
Strength member(mm)
Metallic Steel wire: 0.4Non-metallic FRP: 0.5
Weight (kg/km) 10 11
Maximum pulling tension (N)
Metallic 147
Non-metallic 60
Minimum bending radius (mm) Dynamic: 30Static: 15 Dynamic: 50
Static: 50
Standard length (m) 500
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
G.657. A1
G.657. A2
Op
tical
Fib
er C
able
-
28
Low Friction Indoor Cable is designed for premise ap-
plication in the FTTx network especially where the duct is
congested with existing cables. Feature of compact size
and low friction sheath allows pushing installation. White
colored cable technology prevents aesthetic issues. Low
Friction Indoor Cable is also suitable for vertical wiring due
to high flame retardant property.
Features and Benefits
Construction
Specification
Item Specification
Cable type Indoor cable
Fiber count 1 2
Cable dimension (WxH mm) 1.6 x 2 2 x 3
Strength member (mm) Steel wire : 0.5 x 2Weight (kg/km) 7 11
Maximum pulling tension (N) 200
Minimum bending radius (mm) Dynamic :30, Static : 15
Standard length (m) 1000 500
Twisted and tangled free packing
Multi-cable installation in a pipe
Pushing installation available
Indoor G.657. A1G.657. A2
Downsized to 50% (1 fiber cable) *1
Reduce friction coefficient over 75% *1
Allows pushing installation into ducts High flame retardant solution for MDU network LS0H (Low Smoke Zero Halogen) cable Easy jacket removal with nippers*1 Compared to conventional indoor cable
1.6 mm
2 mm
2 mm
3 mm
1-fiber 2-fiber
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Low Friction Indoor Cable(1 or 2-fiber)
Cables for Pushing Installation
Op
tical Fiber C
able
-
29
EZ-Bend Cable
EZ-Bend cable helps speed and simplify indoor optical
drop cable installations using breakthrough technology
pioneered by OFS. EZ-Bend cable can be routed around
corners and stapled using traditional fast and easy cop-
per wire installation practices, with negligible signal loss.
Ideal for aggressive routing environments where space
is at a premium, EZ-Bend cable offers reliable support
for MDU drop and in-home wiring applications, and can
support great-quality high-definition television (HDTV),
on-demand video, ultra high speed data, voice, online
gaming and many other revenue-generating services.
4.8 mm or 3.0 mm diameter simplex ruggedized cordage
Less than 0.1 dB macrobending attenuation at 1550 nm for 1 turn at 5 mm fiber bend radius
Solid construction fiber with macrobending performance far better than ITU-T G.657B3 exceed
Backward compatible with installed G.652D fibers
Conform to UL Riser and Plenum fire ratings
Compliant with Telcordia 409 & ICEA S-85-596 requirements
Featuring EZ-Bend Optical Technology, a breakthrough developed by OFS Labs
Copper-Like installation process: Can be routed around corners using familiar copper wire practices
Faster, easier installation: No extra steps to install bend limiters, conduits, or race-ways
Compact installation and storage: Conforms to building, slack fits in small storage spaces
Fast, easy, low loss splicing: Splicing to G.652D fiber with existing core and clad aligned splice equipment
Familiar, standard connector termination: Solid fiber construction can be terminated using standard process
Familiar connector endface cleaning: Using same process as with existing G.652 solid construction fiber
MDU and in-home optimized: Ideal for in-residence wiring and difficult installation routes in MDU overbuilds
Greener Solution: Free of heavy metals and RoHS-compliant, solution uses less total materials
Some tests performed on an EZ-Bend 4.8 mm cable subjected to a more stringent configuration than specified by the rigorous Veri-zon MDU simulation test (TPR 9424), showed over 65% better loss performance than the 0.4 dB maximum specified for TPR 9424. In one of the tests (pictured above), the EZ-Bend cable was enduring the sum of 40 corners, 30 staples, one 90 degree corner with 30 lbs tension, one 90 degree corner with 5 lbs tension, with a very low loss (pictured in the power meter window above). Also pictured above is an X-Ray taken of the cable bend around the OFS logoed box.
Features and Benefits
Strong, Reliable Performance
Indoor/Outdoor Riser
EZ-Bend
4.8Cable
EZ-Bend
3.0Cable
Plenum LS0H
Riser Plenum LS0HOFSOffers
Indoor G.657. B3
Op
tical
Fib
er C
able
-
30
Op
tical Fiber C
able
-
31
Optical connection management presents many challenges depending on the location and condi-
tions of the network. Wide variety connectivity products from Furukawa Electric fulfill the needs,
designed to serve business, SFU, and MDU and many more applications. Our connectivity offer
also includes closure and cabinet with various types of splitters inside.
Application Product nameMax. connection/Method
Splitter* Appearance PageFusion splice (Individual fiber)
Connector(Single)
MD
U
Indoor (V-Linx)
V-Linx Fiber Distribution Hub
(FDH)120 132 splitter(Built-in) 39
V-Linx Combiner 60 (12 MPO) 40
V-Linx Terminal 12 (SC) 41
MD
U
Indoor
Termination
J420SS/S/M 8/40/120
14 (SS/S/M)18 (S/M)
116 (S/M)132 (S/M)
42
J422SS/S/M
8/40/120(SC)
14 (SS/S/M)18 (S/M)
116 (S/M)132 (S/M)
42
J421SS/S/M/L
8/40/120/200(SC)
14 (SS/S/M/L)18 (S/M/L)
116 (S/M/L)132 (S/M/L)
43
Cabinet E-SS 4(4-fiber ribbon) 16 (SC)1x41x8 44
J423S-SS 8
1418 45
Outdoor
TerminationJ423H-SS 8
1418 45
*Allowable type of splitter inside the closure.
Closure
Cabinet
Application Product nameMax. connection/Method
Splitter* Appearance PageFusion splice (Individual fiber)
Connector(Single)
Underground
J363 150 1418 33
J380EX 60 34
Aerial
J396L3 100 1418
11635
J397 10 1418 36
*Allowable type of splitter inside the closure.
Closure, Cabinet and SplitterC
losu
re/C
abin
et/S
plit
ter
-
32
Product name Split Dimension (mm)(Bare fiber type) Appearance Page
PS202
14, 18116132
24, 28216232
W4D4L50W5D4L50W7D4L50W4D4L50W5D4L60W7D4L60
50
PS202 218 W6 x D4 x L40 50
Other passive products are also available. Please contact us for more details.
Application Product name Max. connection count Splitter* Appearance Page
MD
U
Indoor Splitter Module 4/8 (SC) 14 / 18 46
Indoor
OutdoorSplitter Module- WM 4/8 (SC) 14 / 18 46
Application Product name
Max. connection countSplitter* Appearance PageFusion splice
(Individual fiber)Connector
(Single)
MD
U/S
FU
Indoor
Outdoor
Demarcation point
J417 4 2 (SC) 47
J425 2 (SC) 48
J426 2 48
Indoor
Rosette
J418 4 47
J428N 1(SC) 49
*Allowable type of splitter inside the cabinet.
Splitter
Splitter module
Clo
sure/Cab
inet/Sp
litter
-
33
Underground Closure J363
The J363 closure is for underground application suit-
able for high fiber count connections (Max. 1200 fiber
splicing). Compact design allows installation in hand
hole, which is suitable for feeder cable connection.
Underground application Allows installation in hand hole (Small size) High fiber counts connection Enable to accommodate water immersion sensor (Optional)
Specification
Features and Benefits
Installation
A1 B1
B2
B3A3
A2
Position Applicable cable size Position Applicable cable size
A1 (mm) 7-30 B1 (mm) 7-30A2 (mm) 8-35 B2 (mm) 8-35A3 (mm) 7-30 B3 (mm) 7-30
Underground
Item Specification Remark
Product No. J363
Dimension (HWL mm) 200200550
Weight (kg) 11
Water proof IPX7
Environmental condition Temperature: -20 to +60CHumidity: 0 to 100%RH
Max
. cab
le
entr
y Cable size 7-30 mm 2 cables/side Information for cable outer diameter
is required 8-35 mm 1 cables/side
Strength member outer diameter (mm) 6
Max
. fibe
r sp
lices
Single fiber 150 10 splices/tray
2-fiber ribbon 300 10 splices/tray
4-fiber ribbon 600 10 splices/tray
8-fiber ribbon 1200 10 splices/tray
Applicable splitter 14, 18
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
34
Underground Closure J380EX
The J380EX closure is for underground application with 60 fiber
splice capability. Compact design allows installation in hand
hole. Accommodation 1 main cable and 1 distribution cable entry
on one side.
Underground application Up to 60 fiber splicing Allows installation in hand hole (Small size)
Features and Benefits
Installation
Specification
B1
B2
A1
A2
Position Applicable cable size Position Applicable cable size
A1 (mm) 8-12 B1 (mm) 8-12A2 (mm) 8-12 B2 (mm) 8-12
Underground
Item Specification Remark
Product No. J380EX
Dimension (HWL mm) 130x155x350
Weight (kg) 4kg
Water proof IPX7
Environmental condition Temperature: -20 to 60CHumidity: 0 to 100%RH
Max. cable entry 8-12 mm 2 cables/side
Max. fiber splices
Single fiber 60 12 splices/tray
2-fiber ribbon 80 8 splices/tray
4-fiber ribbon 160 8 splices/tray
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
35
Aerial Closure J396L3
The J396L3 closure is for aerial application which ac-
commodates 1 main cable, 2 distribution cable, and
16 drop cable entry on one side. Various cable type
entries allow ease of FTTx network construction.
Small size and light weight Up to 240 fiber splicing (Max. 400 fiber splicing) Suitable for FTTx construction Ease of installation Able to place closure over the installed cable Wide wiring space allows ease of operation 18 splitter module installable as well as bare splitter
Installation
Specification
Features and Benefits
Item Specification Remark
Product No. J396L3 J396L3
Dimension (HWL mm) 110110860
Weight (kg) 2
Water proof IPX4
Environmental condition Temperature: -20 to +60CHumidity: 0 to 100%RH
Max
. cab
le
entry
Main cable 8-24 mm 1 cable/side Distribution cable 8-18 mm 2 cables/side Drop cable 16 cables/side
Max
. fibe
r sp
lices
Single fiber 72 120 24 splices/tray
2-fiber ribbon 120 200 20 splices/tray
4-fiber ribbon 240 400 20 splices/tray
8-fiber ribbon 240 400 10 splices/tray
Applicable splitter type(Bare splitter) 14, 18, 116 Installed in fiber tray
Max. count of 18 splitter module 2 sets SC connecter interface
A1. Main cable B1. Main cableB2. Distribution cable
A3. Distribution cable B3. Distribution cable
A4. Drop cables B4. Drop cables
A2. Distribution cable
Position Applicable cable type Position Applicable cable type
A1 Main cable B1 Main cable
A2 Distribution cable B2 Distribution cable
A3 Distribution cable B3 Distribution cable
A4 Drop cable B4 Drop cable
Aerial
18 Splitter module
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
36
Aerial Closure J397
The J397 closure is for aerial application which ac-
commodates 1 main cable, and 2 distribution cable or
6 drop cable entry on one side.
Ultra Small size and light weight Up to 10 fiber splicing Suitable for FTTx construction Ease of installation Able to place closure over the installed cable Sealing is just to cover with sleeve
Installation
Specification
Features and Benefits
Item Specification Remark
Product No. J397
Dimension (HWL mm) 70110550
Weight (kg) 2
Water proof IPX4
Environmental condition Temperature: -20 to +60CHumidity: 0 to 100%RH
Max
. cab
le
entry
Main cable 8-16.5 mm 1 cable/side 3.37 mm 1 cable/side Rural area cable
Distribution cable 8-11.5 mm 2 cables/side Drop cable 6 cables/side
Max
. fibe
r sp
lices
Single fiber 10 10 splices
2-fiber ribbon 20 10 splices
4-fiber ribbon 40 10 splices
Applicable splitter 14, 18 Installed in fiber tray
Aerial
A1. Main cable B1. Main cable
B2. Drop cablesA2. Distributioncables
Position Applicablecable type PositionApplicablecable type
A1 Main cable B1 Main cable
A2 Distribution cableor Drop cable B2Distribution cable
or Drop cable
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
37
V-LinxSpool & Play Solution
The Multi Dwelling Unit (MDU) environment offers
a significant challenge to the network provider.
Ranging from older existing buildings to new con-
structed facilities, the cabling strategy can vary
greatly.
The new V-Linx spool and play solution introduced
by OFS is designed to address the varying condi-
tions in MDU infrastructure.
Uniquely designed for dense, multi-floor units, the
V-Linx Solution provides components that can be configured flexibly to address the profusion of
cabling conditions within both Greenfield and Brownfield environments.
The deployment of the V-Linx solution can significantly speed installation and requires less labor to
install the backbone by using our short length spool-and-play technology.
A simple set of spool-and-play hardware allows a small service team of one or two people to install
the entry distribution cabinet, route a few factory-built riser assemblies, and plug drop boxes to the
riser quickly and efficiently into the MDU.
The system is designed to minimize multiple long-run riser installations and eliminate splice time.
These hubs are designed to enable small crews to deploy entire systems in hours versus tradition-
al large crews taking days.
Easier installation allows companies to start providing services sooner Better cost-benefit relation due to lower overall installation costs Lower hardware costs than traditional systems Less manpower and resources needed for installation and maintenance Shorter spans can minimize cable pulling issues Preinstalled factory assembly helps reduce labor to prepare drop boxes Integrated multiple mounting methods can simplify installation in unknown
Features and Benefits
MDUIndoor (V-Linx)
31 - 36Clo
sure
/Cab
inet
/Sp
litte
r
-
38
Design enabled by AllWave FLEX ZWP Fiber Uses compact PLC splitter technology Quick provision of circuits with SCA connectors Minimal cable management from use of optimized splitter cable
lengths Up to four 132 splitter modules, 144 ports per FDH.
Compact size Supports aggregation of up to 72 units (60 most common) Uses multi-fiber connector interface 0.35 dB loss per MPO connection Integrated with V-Linx cables at the factory Field integration of V-Linx cables optional Up to 200 feet of riser cable
Hands-free fiber pay-off operation Integrated spool axel for fiber storage Spool-and-Play functionality from the factory 50 300 feet of integrated round ribbon cable Parking adapters for units not in service Wall mountable onto multiple surfaces Highly compact design AllWave FLEX ZWP Fiber enabled design
Provide tight bend routing capability to reach each living unit with a flexible design, and remarkable durability and optical performance.
Factory assembled to create high performance terminations as single or double ended assemblies
Common industry splicing or connectors can be used with the single ended drops in those unique situations needing exact lengths
Key Components of the V-Linx Spool and Play Solution
V-Linx Fiber Distribution Hub (FDH) (P.39)
V-Linx Fiber Distribution Hub (FDH)
V-Linx Combiner (P.40)
V-Linx Combiner
V-Linx Terminal (P.41)
EZ-Bend Cable (P.29)
V-Linx Terminal
EZ-Bend Cable
NO.1
NO.2
NO.3
NO.4
31 - 36
Clo
sure/Cab
inet/Sp
litter
-
39
V-Linx Fiber Distribution Hub
The V-Linx Fiber Distribution Hub (FDH) can support up to 144 units/128 splitter ports and is designed for NEMA 12 performance. The FDH is size optimized by leverag-ing the very compact PLC splitter. Its flexible design sup-ports either mass fusion splicing in the field or rapid con-nection through multifiber push-on (MPO) terminations. The mounting hardware is re-configurable to support a variety of wall mounting scenarios in both Greenfield and Brownfield deployments. The FDH is also designed to be installed by a single technician.
Design enabled by AllWave FLEX ZWP Fiber Uses compact PLC splitter technology Quick provision of circuits with SCA connectors Minimal cable management from use of optimized splitter cable lengths
Features and Benefits
Specification
Item Specification
Dimension (W x H x D mm) 458508254
Weight (kg) 20.8
Pallet count (# Master, Total #) 8 per pallet
Number of terminations 144 total/128 active
Wall mountable All surfaces
Color Light beige
Frame retardance UL-94, V-0
In use temperature rating (C) -5 to +50
Storage temperature rating (C) -20 to +70
Water rating (NEMA/IP ratings) NEMA 12/ IP 52
Offers compact PLC splitter with thirty-two 2.0 mm output legs and one 2.0 mm input leg. This product is unique due to its extremely compact size, perhaps one of the smallest in the industry, and the factory terminated configuration provides superior optical performance (17.2 dB max inser-tion loss).
PLC Splitter Specifications
Maximum insertion loss (dB) 17.2
Return loss (dB) 55 (Typical)
Equipped with SCA terminations.
Compact PLC Splitter
29303132
1234
132 PLC splitter
NO.1
MDU Indoor (V-Linx)
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
40
V-Linx Combiner
The V-Linx Combiner aggregates the optical paths from up to six V-Linx terminals (up to 72 individual units). Using the same compact chassis as the V-Linx terminal, the V-Linx Combiner is configured with preterminated AccuFlex PLUS Optical ribbon interconnect cable assemblies in the factory for quick set up and installation in the field (supporting 1335 N of axial load). The cable provides excel-lent transmission performance, flexibility, and connectivity in a very small package (8.4 mm diameter). The V-Linx Combiner provides all the necessary assistance to allow a single person to install the entire cable between floors. It uses multifiber push-on (MPO) connector technology which enables a very compact aggregation point from multiple V-Linx Terminals.
Capable of serving up to 72 units, the V-Linx cable is configured with up to six, 12-fiber ribbon cables, and connects the Fiber Distribution Hub (FDH) to the V-Linx Combiner. The V-Linx cable is a riser rated AccuFlex PLUS Optical ribbon interconnect cable (supporting 1335N of axial load) which provides excellent transmission performance, flexibility and connectivity in a very small package (8.4 mm diameter).The V-Linx cable can be configured at the factory with MPO connectors on one or both ends of the cable assembly.
Compact size Supports aggregation of up to 72 units (60 units most common) Uses multi-fiber connector interface Integrated with V-Linx cables at the factory Field integration of V-Linx cables optional
Features and Benefits
Specification
Optical Performance
Maximum insertion loss (dB) 1.25
Return loss (dB) 55 (Typical)
V-Linx Cable
NO.2
MDU Indoor (V-Linx)
Item Specification
Dimension (W x H x D mm) 190222114
Weight (kg) 3.7
Shipping size (mm) 228202127
Shipping weight (kg) 3.7
Master pack count 1 per box
Pallet count (# Master, Total #) 36 per pallet
Number of terminations (Common) 5 MPO connectors (12-fiber per connector)
Wall mountable All surfaces
Color Central office white
Fire rating of plastics UL-94, rated V-0
In use temperature rating (C) -5 to +50
Storage temperature rating (C) -20 to +70
Water rating (NEMA/IP ratings) NEMA 12/IP 52
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
41
V-Linx Terminal
The V-Linx Terminal is a comprehensive, multifunctional 12-port terminal system that combines fiber storage and a hands-free payoff feature in a single factory-terminated device. The input cable for the V-Linx Terminal is a 15.24 m twelve-fiber pretermi-nated drop cable installed at the factory. The drop cables are terminated with Multifiber Push On (MPO) connectors providing the interface with the V-Linx Combiner for a collective floor distribution design within a building. The distribution side of the V-Linx Terminal provides transition to twelve single-fiber SCA adapters allowing individual drops to 12 living units. The V-Linx Terminal features OFS bend-optimized AllWave FLEX ZWP Fiber enabling superior optical performance within the terminal and the integrated cable tether. The cable spool is integrated on the assembly itself for quick set-up and installation in the field. The V-Linx Installation Tool provides all the neces-sary assistance to allow a single person to install the entire cable between floors.
Hands-free fiber pay-off operation Integrated spool axle for fiber storage Spool and Play functionality from the factory 15 m of integrated cable (a larger V-Linx Ter-
minal is available for 90 m applications)
Parking adapters for units not in service Wall mountable onto multiple surfaces Highly compact design AllWave FLEX ZWP Fiber enabled design Under area splice cable
Features and Benefits
Specification
NO.3
MDU Indoor (V-Linx)
Item Specification
Dimension (W x H x D mm) 190222114
Weight (g) 550
Shipping size (WHD mm) 228202127
Shipping weight (g) 750
Master pack count 5 per box
Pallet count (# Master, Total #) 80 per pallet
Number of terminations 12
Wall mountable All surfaces
Color Central office white
Flame retardance UL-94, V-0
In use temperature rating (C) -5 to +50
Storage temperature rating (C) -20 to +70
Water rating (NEMA/IP ratings) NEMA 12/IP 52
Optical Performance
Maximum insertion loss (dB) 1.25
Return loss (dB) 55 (Typical)
Note: Dimensions shown are for the standard V-Linx Terminal. The larger V-Linx Terminal dimensions are: 253 x 202 x 119 (mm)
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
42
Termination Box J420, J422
Indoor type splicing box for MDU
(Multi Dwelling Unit) application.
Features and Benefits
Wide product range for various type of MDU J420 series: Suitable for MDU application with fusion splice J422 series: Suitable for MDU application with SC connector Easy to re-wire by adopting SC connector
J420-SS/J420-S/J420-M J422-SS/J422-S/J422-M
MDU Indoor
Termination
Opticalfiber cable
Optical fiber cableDrop cable orindoor cable
Fusion splice
Opticalfiber cable Drop cable or
indoor cable
Optical fiber cable
SC connectorSC adaptor
Wiring Diagram
J420 J422
Specification
Item Specification
Product No. J420-SS J420-S J420-M J422-SS J422-S J422-M
Dimension (WHD mm) 32621863 440390100 440850100 32621863 440390100 440850100
Weight (kg) 2 5 11 2 5 8.5
Flame retardance UL94, V-0 UL94, V-0
Mount condition Indoor wall mount type Indoor wall mount type
Cable entry position Bottom Bottom Top and Bottom
Cable entry 3 6 6 3 Top: 1Bottom: 6Top: 1
Bottom: 6
Max. cable count
Optical cable(~ 23mm) 1 per cable entry 1 per cable entry
Drop cable or Indoor cable 6 per cable entry 6 per cable entry
Max. single fiber fusion splice count 8 40 120
Max. SC connector joint count 8 40 120
Applicable splitter 14
1418
116132
14
1418
116132
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
43
Termination Box J421
Indoor type splicing box for MDU
(Multi Dwelling Unit) application.
Features and Benefits
Wide product range offer for various type of MDU Suitable for MDU application with SC connector Suitable for installing slotted core cable (4-fiber ribbon) Easy to re-wire by adopting SC connector
J421-SS/S/M/L
MDU Indoor
Termination
Wiring Diagram
Opticalfiber cable
Optical fiber cable
Drop cable orindoor cable
SC connectorSC adaptorFusion splice
Fiber ribbonexchange module
Specification
Item Specification
Product No. J421-SS J421-S J421-M J421-L
Dimension (WHD mm) 32621863 440390100 440850100 4701500140
Weight (kg) 2 5 11 35
Flame retardance UL94, V-0
Mount condition Indoor wall mount type
Cable entry position Bottom Top and Bottom
Cable entry 2 6 6 Top: 6Bottom: 6
Max. cable count
Optical cable(~ 23mm) 1 per cable entry
Drop cable orIndoor cable 6 per cable entry
Cable in Max. 4-fiber ribbon fusion splice count 2 10 30 50
Cable out Max. single fiber fusion splice count 8 40 120 200
Max. SC connector joint count 8 40 120 200
Applicable splitter 14
1418
116132
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
44
Termination Box E Cabinet-SS
Indoor type splicing box for MDU
(Multi Dwelling Unit) application.
Features and Benefits
Able to install various modules into the cabinet depending on usage Easy to re-wire by adopting SC connector Max. connector counts: 16 SC connector joints
MDU Indoor
Termination
Wiring Diagram
Fusion spliceSC adaptorSC connector
Drop cable or Indoor cable
Round Cable or 4 fiber drop cable
Fiber ribbon exchange module or Splitter module
Specification
Item Specification
Product No. E Cabinet-SS
Dimension (W x H x D mm) 32621863
Weight (kg) 2
Flame retardance UL94, V-0
Mount condition Indoor wall mount
Cable entry Bottom
Max. cable countCable in Optical cable (~ 13.5mm): 1 or4-fiber drop cable: 1
Cable out Drop cable or indoor cable: 16
Max. 4-fiber ribbon fusion splice count Cable in 1
Max. SC connector joint count Cable out 16
Applicable splitter mudule 1x4, 1x8
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
45
Termination Box J423H-SS, S-SS
Small indoor splicing box type designed
for MDU network deployment.
Drop cable and indoor cable with 14 or
18 splitter (optional) is spliced inside
the box.
Features and Benefits
For small MDU Wall mount type Light weight Max. fusion splice: 8-fibers
J423H-SS J423S-SS
Wiring Diagram
Drop cable orindoor cable
Drop cable orindoor cable
Fusion splice
MDU Indoor
TerminationTermination
Indoor
Outdoor
Specification
Item Specification
Product No. J423H-SS J423S-SS
Dimension (WHD mm) 15615169 15014538.5
Weight (kg) 0.3
Flame retardance UL94, V-0 UL94, V-0 *1
Mount condition Indoor/outdoor wall mount type Indoor wall mount type
Water proof IPX3
Cable entry position Top, Bottom, Right
Cable entry Main cable: 2 (cable width: 2mm)Drop cable / indoor cable: 8
Max. cable count
Main cable 1 per cable entry
Drop cable or Indoor cable 1 per cable entry
Max. single fiber fusion splice count 8
Applicable splitter 14, 18
*1 Except for plastic cover* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
46
Splitter modules for Indoor or Outdoor use.Both type of modules are suit-able for MDU application. SC connector interface of the modules allows quick installa-tion.Outdoor type is applicable on external wall of small apart-ment.
Splitter Module (indoor type)
Indoor wall mount type Ultra small and light weight Easy access with SC connectors Mounting direction is changeable depending
on situations Easy fixing on a steel cabinet with magnets
Splitter Module WM (indoor/outdoor type)
Suitable for small size apartment Attachable on external wall of apartment Small and light weight Easy access with SC connectors Water proof of IPX3
Features and Benefits
Indoor
Outdoor
Specification
Item Specification
Product No. Splitter Module-4 Splitter Module-8 Splitter Module WM-4Splitter Module
WM-8
Dimension (WHD mm ) 942957 1022977 15615169
Weight (kg) 0.2 0.5
Flame retardance UL94, V-0
Mount condition Indoor wall mount type Indoor/outdoor wall mount type
Water proof IPX3
Insertion loss (dB)*1 8.9 12.4 8.9 12.4
Connector type SC
*1 Including insertion loss of connectors
Splitter Module
Splitter Module (indoor type)
14 18
Splitter Module WM (indoor/outdoor type)
14 18
MDU
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
47
Splicing Box J417, J418
J417
Outdoor application: IPX3 (IEC60529) Wall mount type Compact size: W115H200D30 mm Light weight by plastic body and cover SC connector termination is available (optional) Max. fusion splice: 4-fibers
J418
Indoor application (Flame retardant material) Wall mount type Compact size: W120H115D16 mm Light weight by plastic body and cover Max. fusion splice: 4-fibers
J417
J418
The small splicing box for Single Family
Unit (SFU).
Features and Benefits
Indoor
Outdoor
Demarcation point
MDU/SFU
Indoor
Rosette
Wiring Diagram
Indoor cable oroptical cord
Indoor cable oroptical cord
Drop cable Drop cable
SC connectorSC adaptorFusion spliceFusion splice
J418J417
Indoor cable or optical cord
Drop cable
Drop cable
Fusion splice
Specification
Item Specification
Product No. J417 J418
Dimension (WHD mm) 11520030 12011516
Weight (kg) 0.2 0.1
Flame retardanceCover: UL94, V-2
Main body: UL94, HBCable clamp: UL94, V-0
Cover: UL94, HBMain body: UL94, HB
Cable clamp: UL94, V-0
Mount condition Indoor/outdoor wall mount type Indoor wall mount type
Water proof IPX3
Cable entry position Bottom: 2 Bottom: 2, Top: 1
Max. cable count
Drop cable or Indoor cable 4 per cable entry
Optical cord ( 2 mm) 2 per cable entryMax. single fiber fusion splice count 4
Max. SC connector joint count 2
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
48
Splicing Box J425, J426
J425 Outdoor application: IPX3 (IEC60529) Wall mount type Compact size: W77H183D37 mm Light weight by plastic body and cover SC connectorized drop or indoor cable
termination (Max. 2 connectors) or KANTAN SC For bend insensitive (R15) fiber Can be used indoor (Flame retardant material) Both outdoor/indoor use
J426 Outdoor application: IPX3 (IEC60529) Wall mount type Compact size: W65H155D26 mm Light weight by plastic body and cover SC connector termination (Max. 1 connector) Fusion splice: Max. 2-fibers For bend insensitive (R15) fiber Box color: Ivory, Brown, Grey
Wiring Diagram
J425 joint box is designed for outdoor/indoor use Single
Family Unit (SFU) application with SC connectorized drop
or indoor cable termination. J426 joint box is also designed
for outdoor/indoor use SFU application with fusion splice or
SC connector termination. The cable shall use bend insen-
sitive fiber (R15).
Features and Benefits
J426J425
J425
Indoor cableDrop cable
SC connectorSC adaptor
J426
Indoor cableDrop cable
Fusion splice
Indoor
OutdoorMDU/SFU
Demarcation point
Specification
Item Specification
Product No. J425 J426
Dimension (WHD mm) 7718337 6515526
Weight (kg) 0.2 0.1
Flame retardance UL94, V-0 UL94, HB
Mount condition Indoor/outdoor wall mount type
Water proof IPX3
Cable entry position Bottom: 2
Max. cable count Drop cable or Indoor cable 2 per cable entry
Max. single fiber fusion splice count 2Max. SC connector count 2
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
49
J428N
Optical Connector Rosettefor FTTx Network J428N
J428N rosette is designed for termination of drop or
indoor cable with KANTAN SC Connector (Field install-
able connector).
Wall mounted indoor type Small size : W50 x H100 x D17 mm Allow drop / indoor cable entry from 4 directions For bend insensitive (R15) fiber Kantan SC connector termination (Max. 1 connector) SC adaptor with shutter
Features and Benefits
IndoorMDU/SFU
Rosette
Specification
Item Specification
Product No. J428N
Dimension (WHD mm) 5010017
Weight (kg) 0.1
Flame retardance UL94, V-0
Mount condition Indoor wall mount type
Cable entry position Top, Bottom, Right, Left
Max. cable count Drop cable or Indoor cable 1 per cable entry
Max. SC connector joint count 1
Wiring Diagram
Drop / Indoor Cable
SC connectorSC adaptor
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure
/Cab
inet
/Sp
litte
r
-
50
PS202 is the compact 1xN and 2xN optical splitter using PLC (Planar Lightwave Circuit) and suitable for installation in optical equipments. PS202 is the best choice for con-structing passive optical networks.
Video signals distribution in optical CATV Usable for PON (Passive Optical Network) Signal-distribution using optical AMP
Low insertion loss Compact packaging size. Suitable for installation in a
splicing closure High reliability (Telcordia GR-1209, GR-1221 qualified)
Features and Benefits
Compact PLC SplitterPS202-1xN and 2xN
PS202-218 is the compact size optical splitter, which is capable to distribute a pair of video and data signals.This product is preferable for the construction of PON (Pas-sive Optical Network), and it realizes easier installation and higher-density packaging in a closure.
Efficient for installation in a splicing closure Compact size (Same as 18 splitter in dimensions of
package) High reliability
Features and Benefits
Compact PLC SplitterPS202-218
Specification Installation
Item SpecificationConfiguration 2(18)
Operating wavelength (nm) 1260 to 1360/1480 to 1580
Insertion loss (dB) 11.0
Uniformity (dB) 1.0
PDL (dB) 0.3
Directivity (dB) 50
Return loss (dB) 50
Operating temperature ( C) -40 to +75
Storage temperature ( C) -40 to +85
Dimensions (WDL mm) 6440
* Not including connectors in all specifications* Available connector upon customer request
2-fiber drop cable2-fiber ribbon
Fusion splice
Video signal
Data signal
Fusionsplice Output
Input
2-fiber ribbon
for user
218 splitter
Specification
Item SpecificationOperating wavelength (nm) 1260 to 1360/1480 to 1580
Configuration 14 18 116 132 24 28 216 232
Insertion loss (dB) 7.8 11.0 14.5 17.8 7.8 11.2 14.5 17.8
Uniformity (dB) 1.0 1.0 1.5 2.0 1.2 1.5 2.0 2.0
Dimension (WxDxL mm) 4440 4440 5450 7450 4450 4450 5460 7460
PDL (dB p-p) 0.3
Directivity (dB) 50
Return loss (dB) 50
Operating temperature ( C) -40 to +75
Fiber length (m) 2
* Not including connectors in all specifications* Available connector upon customer request
Ordering Information
PS202-
Configuration1418
1161322428
216232
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify the specification of these products without prior notification.
Clo
sure/Cab
inet/Sp
litter
-
51
Opt
ical
Con
nect
or a
nd T
ools
KANTAN SC
KANTAN SC
Closure
Demarcation point
ONU
Rosette
Connector
High reliable optical connector offered by Furukawa Electric allows using inside the closure, optical
termination box, demarcation point, and rosette. One of the Furukawas innovative optical connec-
tor called KANTAN SC (field installable connector) with associated tools enables quick assembly
with drop cable, indoor cable, and low friction cable at various places.
Application Product name Picture Page
Indoor
OutdoorMechanical Splice for Drop Cable 54
Mechanical Splice
Application Product name Type Picture Page
KANTAN SC for Cable FA-503 Fiber coating stripper 56
KANTAN SC for Fiber S210 Fiber coating stripper 56
KANTAN SC S326A Fiber cleaver 57
KANTAN SC S218R Fiber coating thermal stripper 57
Tools
Optical Connector and Tools
Application Product name Picture Page
Indoor
Outdoor
ClosureBox (Demarcation point, Rosette, ONU)
KANTAN SCfor Cable 52
KANTAN SCfor Fiber 53
Indoor
Box (Rosette, ONU)
Single-mode Fiber ConnectorPatch Cord 55
-
52
Optical C
onnector and Tools
Field Installable ConnectorKANTAN SC Connector (for Drop/Indoor Cable)
KANTAN SC Connector enables
quick and easy connector assembly
onto Drop/Indoor Cable at the field.
It needs only common tools and/or
equipment.
Features and Benefits
Quick and easy assembly time No polishing or no epoxy required Fully compatible with standard SC connector Low insertion loss
Assembly Process
1. Insert the fiber into the plug 2. Remove wedge 3. Close cover
Indoor
Outdoor
Specification
Item Specification
Applicable cable diameter (mm)3.1 x 2.0 (Drop/Indoor cable)
2.0 x 1.6 (Low friction indoor cable)
Polishing type SPC polish, APC polish
Insertion loss (dB) 0.5 (SPC polish), 0.6 (APC polish)
Return loss (dB) 40 (SPC polish), 50 (APC polish)
Operating temperature (C) - 40 ~ +75
Ordering Information
Type Product Code
SPC polish, Drop/Indoor Cable KSC/SPC-F-SM-I20
SPC polish, Micro Indoor Cable KSC/SPC-F-SM-I16
APC polish, Drop/Indoor Cable KSC/APC-F-SM-I20
APC polish, Micro Indoor Cable KSC/APC-F-SM-I16
Tools for Assembly (Optional)
Fiber coating stripper FA-503
Cable holder FA-501B
Fiber cleaver S326A* This is typical specification. Furukawa Electric reserves the right to improve, enhance and modify
the