fully welded ball valves · a bleed valve may replace the drain plug. double block and bleed...
TRANSCRIPT
A Long Experience in Energy Equipment and one Goal:
Ful ly WeldedBal l ValvesType 58 & 59
The Customer ’s sa t i s fac t ion .
VALVITALIA is an Italian Group of valves and other energy equip-ment manufacturers created to provide to the customers completepackages of products and services.Italy historically has been the Country with the largest number of val-ves and other energy equipment manufacturers. Also, Italy has pro-vided to the oil & gas companies excellent engineering services. Experienced management, quality, performance, availability of largeinventory and full dedication to the customer’s satisfaction differen-tiate VALVITALIA from the competition.VALVITALIA can provide discrete products and/or complete packa-ges, including actuators, gear operators, pre-assembled skids for gasregulating e metering stations. Among the pre and post sales servi-ces, VALVITALIA offers the refurbishment of any type of valve. Theavailability of stocks represents an additional service to the custo-mers, very difficult to find elsewhere.
2
VALVITALIA GROUP
Offer the best product at a competitive price and to respect agreed delivery times is our commitment.
VALVITALIA reserves the right to change design, specification and materials without notice
STANDARD FEATURES Type 59 Type 58 COMMENTS Type 59/58
3
TECHNICAL FEATURES
When the ball is in fully closed position, two trunnions absorb the side thrust generated by line pressures, preventing excess friction between ball and seats. With this system, even at full rated working pressure, operating torque stays low. Therefore a generous sizing of trunnions is essential to the life and operability of the valve.The spherical surface is machined and ground to close tolerance. To reduce torque and minimize wear, the ball is then electrolessnickel plated and polished to mirror finish. For special applications the ball may be hardfaced with T.C.C. (Tungsten carbidecoating) to improve resistance to wear and prevent scratching caused by hard particles.
Size range 1 1/2” FB up to 6” RB 6” FB up to 60” Special sizes Pressure ANSI 150-2500 ANSI 150-2500Fully welded body design YES YESAnti-static device YES YESSelf relieving seats YES NO 58-optional features (no extra cost)Double Piston Effect seats NO YES 59-optional features (*)Primary metal to metal seal, secondary protection with o-ring NO YESPlastic polymer insert on seat sealing YES YES 58-optional features (*)Lubricated stem YES YESLubricated seat NO YES 59-optional features (*)Double block and bleed YES YES Open / closed positionMetal to metal seats YES(*) YES(*)Trunnion mounted ball YES YESFull or Reduced bore YES YESBi-directional YES YESStem anti-blow out proof design YES YESStem extension YES(*) YES(*)N.D.T. verification on body weld joints According to ASME VIII (ultrasonic examination) YES YES Div.I (appendix 12)N.D.T. verification on welding ends(dye penetrant) YES YES According to ASME VIII Div.I Minimum thickness ASME B16.34 YES YESRF or RTJ flanges to ASME B16.5 YES YES Other flange design(*)BW (butt-weld) ends to ASME B16.25 YES YES Other code for BW design(*)Bore and end-to-end dimensions to API 6D YES YES Dimensions other than API 6D(*)Manufacture in accordance with API spec. 6D / ASME B 16.34 YES YESMaterials certification to EN10204 type 3.1.B for pressure containing parts, ball, stem and seats YES YESFire safe design to API 6FA (BS 6755 Pt. 2) YES YES Other fire safe code (e.g. API 607)(*)Operation by lever, gear w/ handwheel or actuator YES YESMaintenance The body construction precludes the internal disassembly at site. The complete replacement
on the upper stem seal can be achieved with the valve installed without pressure.
(*) available with extra cost
Type 3.1.C materials certification level (*)
TYPE 59 TYPE 58
Trunnion mounted ball valve
VALVITALIA reserves the right to change design, specification and materials without notice
4
TECHNICAL FEATURES
Emergency stem and seat sealant injectionIn case of emergency, when sealing materials (seat sealing and stem o-ring) are damaged or decomposed by fire or other accidental causes, a sealant injection into fittings on both stem and seatprevents leakage until the primary seal is restored. For Type 59 ball valve the seat sealant injection isan optional feature available with an extra cost. However, the material between ball and seat is a thermoplastic, thus no further injection is necessary. Self lubricated, low friction materials are used forstem bearings, stem seals and body seats. Low friction materials, e.g. nylon, are used for seat inserts.Stem bearings and self-lubricating seals give predictable operating torque for the life of the valve.
Stem The stem is made separately from the ball. It is blow-out proof, properly obtained with an integral collar in the bottom of the stem.
Stem SealSealing system can be defined triple: two static o-rings seal the stem, plus a third graphite retained bythe adaptor flange. This ultimate seal can be replaced when the valve is in line and in closed position.
“59” Sealing PrincipleThe sealing between the seat and the ball is performed by a plastic polymer insert. The choice of thissoft sealing depending on the service conditions.The initial seal, at low differential pressure, is obtained by the spring loaded floating seats (spring energized) which achieve independent sealing.Increasing the line pressure behind the upstream seat ring helps the seat spring load to force theupstream seat tightly against the ball.
“58” Sealing PrincipleThe sealing between the seat and the ball is performed by a primary metal to metal seal, and a secondary O-ring seal for both the seats. The choice of the secondary seal “soft sealing” dependingon the service conditions.The initial seal, at low differential pressure, is obtained by the spring loaded floating seats (spring energized) which achieve independent sealing.Increasing the line pressure behind the upstream seat ring helps the seat spring load to force theupstream seat tightly against the ball.
Fire safe design and testFire safe is standard design of Valvitalia ball valve.Two o-ring and gland gasket prevent leakpaths from the valve stem area. If fire deteriorate o-ring,gland gasket, the stem firesafe packing prevent fluid or gas leakage.Valvitalia soft seat ball valve fire safe test (shown in the image) was witnessed and certified accordingto API6FA – BS 6755 PT.2
Anti-static deviceThis device is a standard feature of VALVITALIA ball valves. A coil spring thrusts a little sphere, providing earthed continuity between stem and other metallic components of valve (ball and body) inorder to avoid sparks during turning of the stem for opening and closing the valve and prevent problems in case of use with flammable fluids and gas.
Seat design Type 59
Seat design Type 58
Fire safe test
Antistatic device detail
VALVITALIA reserves the right to change design, specification and materials without notice
5
TECHNICAL FEATURES
Body vent and drainThe drain and vent plug of the valve body enable to check the integrity of the seat ring. A bleed valve may replace the drain plug.
Double block and bleedVALVITALIA design of a valve with two seating surfaces between which the cavity can be vented trough a bleed connection andthus confirm the tightness of the valve, as well in closed position as open position, when pressure is applied to any side or bothsides of the valve.
Double piston effect (59-option, 58-standard)With the DPE seat configuration when there is a leakage in the upstream seat, the pressure entering into the body cavity pushesthe downstream seat against the ball and the valve seals. This effect is a sealing principle involved in utilising line pressure to effect a seal across the floating seat.
First barrier Second barrier
A relief valve is recommended to be installed to protect the body cavity from excess pressure.
First barrier Second barrier
Self relieving seat (59-standard, 58-option)In self relieving condition, excessive internal body pressure is automatically relieved both in upstream and downstream line by for-cing the seats away from the closure element.
VALVITALIA reserves the right to change design, specification and materials without notice
6
151 LOWER TRUNNION PLATE A-350-LF2149 VENT PLUG CARBON STEEL65 SEAT INSERT PTFE CCG 261 STOP COLLAR Fe 360 360 BEARING HOUSING A-105 358 TRUNNION BEARING DRY BEARING57 STEM PIN 42CrMo453 STEM BEARING DRY BEARING51 LOWER TRUNNION 42CrMo4 (AISI 4140) 136 PIN C7531 ANTISTATIC DEVICE 18-830 STEM GREASE FITTING AISI 101828 DRAIN PLUG CARBON STEEL27 SEAT SPRING 18-825b SEAT RING A-350-LF2 + PTFE CCG 122 UPPER THRUST WASHER DRY BEARING20 ADAPTER PLATE Fe 430 Gr. B 419 STEM F.S. SEAL GRAPHITE18 TOP COVER F.S. SEAL GRAPHITE15 TOP COVER O-RING VITON14 SEAT GASKET O-RING VITON12 STEM O-RING VITON10a BEARING HOUSING CAPSCREW A-193-B7 310 ADAPTER PLATE CAPSCREW A-193-B7 49 TOP COVER CAPSCREW A-193-B76 GLAND BUSHING AISI 1018 15 TOP COVER A-350-LF24 STEM 42CrMo4 (AISI 4140) 13 BALL A-350-LF2 12 CLOSURE A-350-LF21 BODY A-350-LF2
Pos. Description Material Notes
NOTES: 1) ELECTROLESS NICKEL PLATED 0.001” THICKNESS.2) NYLON FOR CLASS 15003) VITON AED FOR CLASS 600 AND ABOVE
SERVICE: STANDARD FLUID – CARBON STEEL VALVE –FIRE SAFE DESIGNTEMPERATURE: -7°C +160°C (-7°C + 121°C FOR CLASS 900-1500)
STD. MATERIAL SELECTION
Type 59
Type 58
NOTES: 1) ELECTROLESS NICKEL PLATED 0.001” THICKNESS.2) NYLON INSERT ON CLASS 900/1500 3) FOR LEVER OPERATED VALVES4) FOR GEAR OR ACTUATOROPERATED VALVES
SERVICE: STANDARD FLUID – CARBON STEEL VALVE – FIRE SAFE DESIGNTEMPERATURE: -7°C +160°C (-7°C + 121°C FOR CLASS 900-1500)Pos. Description Material Notes
149 VENT PLUG CARBON STEEL48a GREASE SEAL O-RING VITON 346 BEARING RETAINER PIN 42CrMo4 (AISI 4140)44 CHECK VALVE AISI 101842 WASHER CAPSCREW A-193-B741 SEAT GREASE FITTING AISI 101838 WASHER CARBON STEEL36 PIN C7533 BEARING DRY BEARING32 BEARING RETAINER Fe 51031 ANTISTATIC DEVICE 18-830 STEM GREASE FITTING AISI 101828 DRAIN PLUG CARBON STEEL27 SEAT SPRING 18-826 INNER SEAT RING A-350-LF2 125 OUTER SEAT RING A-350-LF2 123 LOWER THRUST WASHER Fe 360 + PPS22 UPPER THRUST WASHER DRY BEARING20 ADAPTER PLATE Fe 430 Gr. B19 STEM F.S. SEAL GRAPHITE18 TOP COVER F.S. SEAL GRAPHITE15 TOP COVER O-RING VITON 314 SEAT GASKET O-RING VITON 313 SEAL O-RING VITON 2-312 STEM O-RING VITON 310 ADAPTER PLATE CAPSCREW A-193-B79 TOP COVER CAPSCREW A-193-B76 GLAND BUSHING AISI 1018 15 TOP COVER A-350-LF24 STEM C40 (AISI 1040) 13 BALL A-350-LF2 12 CLOSURE A-350-LF21 BODY A-350-LF2
VALVITALIA reserves the right to change design, specification and materials without notice
7
STD. MATERIAL SELECTION
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP
AISI 4140 + ENPB7 / 2HPTFE (2)VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2AISI 4140 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + ENPASTM A350 Gr.LF2 + ENP
AISI 1040 + ENPB7 / 2H
VITON (2)VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A-694-F65 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
AA
RatingTemperatureBodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for general service (sweet fluids) FULL CARBON STEEL
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
B7 / 2HPTFE (2)VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
A 182 F316 LN + ENPA 182 F316 LN + ENP
17-4-PH + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F316 + ENPA 182 F316 + ENP
17-4-PH + ENPB7 / 2H
VITON (2)VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A-694-F65 + ENP
ASTM A350 Gr.LF2 + ENPAISI 4140 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
CC
RatingTemperatureBodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for corrosive services (comply to NACE MR 01-75) STAINLESS STEEL TRIM
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HPTFE (2)VITON
INCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENP
A 182 F6NM + ENPB7 / 2HNYLONVITON
INCONEL X 750
150-1500-29O + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HVITON (2)
VITONINCONEL X 750
2500-29O / + 180OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2A 182 F6 + ENPA 182 F6 + ENPA 182 F6 + ENP
B7 / 2HNYLONVITON
INCONEL X 750
DD
RatingTemperatureBodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for highly corrosive services 13% Cr. STAINLESS STEEL TRIM
150-1500-29O + 180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
B7 / 2H (TEFLON COATED)PTFE (2)VITON
INCONEL X 750
2500-29O / + 180OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPB7 / 2H (TEFLON COATED)
NYLONVITON
INCONEL X 750
150-1500-29O + 180OCA 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP
17-4-PH + ENP B7 / 2H (TEFLON COATED)
VITON (2)VITON
INCONEL X 750
2500-29O / + 180OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPB7 / 2H (TEFLON COATED)
NYLONVITON
INCONEL X 750
EE
RatingTemperatureBodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for corrosive services (comply to NACE MR 01-75) FULL STAINLESS STEEL VALVE
Alternative material selections available upon request.Note: (2) NYLON FOR CLASS 900-1500
VALVITALIA reserves the right to change design, specification and materials without notice
8
STD. MATERIAL SELECTION
150-1500-29O + 180OC
A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H (TEFLON COATED)
PTFE (2)VITON
INCONEL X 750
2500-29O / + 180OC
A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H (TEFLON COATED)
NYLONVITON
INCONEL X 750
150-1500-29O + 180OC
A 182 F51A 182 F51
A 182 F51 + ENPA 182 F51 + ENPA 182 F51+ ENP
B7 / 2H (TEFLON COATED)VITON (2)
VITONINCONEL X 750
2500-29O / + 180OC
A 182 F51A 182 F51A 182 F51 A 182 F51
A 182 F51 + ENPB7 / 2H (TEFLON COATED)
NYLONVITON
INCONEL X 750
FF
RatingTemperature
BodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for corrosive services (comply to NACE MR 01-75) FULL DUPLEX STEEL VALVE
150-1500-49O+180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENPA 182 F316 + ENP
L7 / Gr.7PTFE (2)
PTFE + ELGILOYINCONEL X 750
2500-49O / +180OC A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPL7 / Gr.7 NYLON
PTFE + ELGILOYINCONEL X 750
150-1500-49O+180OC A 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP
17-4-PH + ENPL7 / Gr.7 VITON (2)
PTFE + ELGILOYINCONEL X 750
2500-49O / +180OCA 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
17-4-PH + ENPL7 / Gr.7 NYLON
PTFE + ELGILOYINCONEL X 750
GG
RatingTemperature
BodyClosureBallSeatStemcapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for low temperature with stem extension FULL STAINLESS STEEL VALVE
150-1500-196O +120OC A 182 F316A 182 F316
A 182 F316 + ENP A 182 F316 + ENP
XM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
2500-196O / +120OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENPINCONEL 718 + ENP
A 453 Gr.660 KEL-F
PTFE + ELGILOYINCONEL X 750
150-1500-196O +120OCA 182 F316A 182 F316
A 182 F316 + ENPA 182 F316 + ENP
XM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
2500-196O / +120OC
A 182 F316A 182 F316
A 182 F316LN + ENPA 182 F316LN + ENP
XM 19 + ENPA 453 Gr.660
KEL-FPTFE + ELGILOYINCONEL X 750
LL
RatingTemperature
BodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for cryogenic temperature with stem extension FULL STAINLESS STEEL VALVE
150-1500-29O + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
17-4-PH + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
2500-29O / + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
INCONEL 718 + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
150-1500-29O + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
17-4-PH + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
2500-29O / + 250OC
ASTM A350 Gr.LF2ASTM A350 Gr.LF2
ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC
INCONEL 718 + ENPB7 / 2H
METAL TO METALPTFE + ELGILOYINCONEL X 750
MM
RatingTemperature
BodyClosureBallSeatStemCapscrewSeat gasketOther sealsSeat spring
59 58
Trim materials for high temperature
Alternative material selections available upon request.Note: (2) NYLON FOR CLASS 900-1500
VALVITALIA reserves the right to change design, specification and materials without notice
9
383851517676
102102
®
216216283283305305457
®
178178203203229229394
®
191191216216241241406
75758585
120120140140
9090
110110135135160160
120120120120120120135135
2727272727272727
125125125125125125125125
130130160160220220240240
270270320320450450660660
33333333
1012152027325060
1215202536426370
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 150 (PN 20)Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)
TYPE59
383851517676
102102
®
216216283283305305457
®
216216283283305305404
®
232232298298321321419
75758585
120120140140
9090
110110135135160160
120120120120120120120120
2727272727272727
125125125125125125125125
130130160160220220240240
270270370370570570660660
33333333
1113182532456685
16182530405883
108
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 300 (PN 50)Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75 bar)
TYPE59
383851517676
102102
®
®
®
®
®
406406495
®
®
®
®
®
406406495
®
®
®
®
®
410410498
75758585
120120150150
9090
110110135135160160
120120120120120120135135
2727272727273535
125125125125125125125125
130130160160220220250250
270270370370570570660660
33333355
1214192442457795
19222535556395
120
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 400 (PN 64)Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)
TYPE59
BALL VALVES TYPE 59 (Overall Dimensions)
383851517676
102102
®
292292356356432432559
®
292292356356432432559
®
295295359359435435562
75758585
120120150150
9090
110110155155190190
120120120120120120135135
2727272727273535
125125125125125125125125
135135165165225225255255
300300430430670670760760
33333355
12142030486793
115
192228386386
118140
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 600 (PN 100)Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)
TYPE59
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
10
BALL VALVES TYPE 59 (Overall Dimensions)
383851517676
102102
®
369369381381457457610
®
369369381381457457610
®
372372384384460460613
85859090
125125150150
9595
120120155155190190
120120120120135135168168
2727272735354242
125125125125125125250250
140140175175240240265265
400400600600900900
--
33335599
202240486975
110147
3143526498
107140190
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 900 (PN 150)Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar)
TYPE59
383851517676
102102
®
369369470470546546705
®
369369470470546546705
®
372372473473549549711
100100110110155155190190
9595
120120155155190190
120120120120135135168168
2727272735354242
125125125125125125250250
200200220220300300335335
400400600600900900
--
33335599
2935456090
100146230
36435775
110129190290
SIZE
inches
DN FACE TO FACE G H L M K S X BARE STEMVALVE WEIGHT
LEVER
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
ANSI CLASS 1500 (PN 250)Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)
TYPE59
3232444464648989
133133
®
451451578578673673914914
1022
®
451451578578673673914914
1022
®
454454584584683683927927
1038
110110125125165165230230260260
140140160160185185200200235235
120120135135168168185185250250
27273535424250505050
125125125125250250300300500500
215215235235305305370370485485
335599
15152828
40447098
162168322332675860
6286
118152218282362570750990
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
1.5”2”x1.5”x2”
2”3”x2”x3”
3”4”x3”x4”
4”6”x4”x6”
6”8”x6”x8”
ANSI CLASS 2500 (PN 420)Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar)
TYPE59
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
11
BALL VALVES TYPE 58 (Overall Dimensions)
152152203203254254305305337387387438489489540591591635686737737781832876978
10221118116813841461
457521521559559635635838762838991914991
1143®
114313971245134613971727152416261727®
®
®
®
®
®
394457457533533610610762686762914864914
1067®
106712951143124512951524137214731524®
®
®
®
®
®
406470470546546622622775699775927876927
1080®
1080®
®
®
®
®
®
®
®
®
®
®
®
®
®
300300340340380380420420470510510545590590630670670720755805805845875910
100010351135118013401435
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
135135168168185185185185250250250275310310310355355415415415415415415500500500500500518518
35354242505050505050505066666665658686757575759696969696
118118
125125250250300300300300500500500500600600600600600600600600600600600600600600600600700700
305400400465465550550675585675835760835990920990
12351060114012351445129513601445162517151895197022852450
5599
1515151528282842676767
104104170170178178178178273273273273273710710
165185170195230250370480520790920
11201420163219202400274830003700420048586050640071009770
1120014380162202480029000
200220210250290315460590650980
11501300170019122280290032383620438050006000698066008140
108701260015900178502600030400
SIZE
inches
DN FACE TO FACE G
FACE
TO FA
CEW
E COM
PACT H L M K S BARE STEM
VALVE WEIGHTGEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 150 (PN 20)Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)
TYPE58
® To be confirmed after P/O placement.
152152203203254254305305337387387438489489540591591635686737737781832876978
10221118116813841461
457457521559559635635838762838991914991
11431092114313971245134613971727152416261727®
®
®
®
®
®
403403502568568648648838762838991914991
11431092114313971245134613971727152416261727®
®
®
®
®
®
419419518584584664664854778854
1010930
101011651114116514221270137214221756155316541756®
®
®
®
®
®
300300340340380380420420470510510545590590630670670720755805805845875910
100010351135118013401435
457457521546559597635775724775902851902
1067978
106712451130119412451435130813841435165116891854193022102350
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
168168185185250250250250250275275310355355415415415415415500500500500500500500518518518518
4242505050505050505050666565868686757596969696969696
118118118118
250250300300500500500500500500500600600600600600600600600600600600600600600600700700700700
305405405470470555555680595680845770845
1000930
100012501070115012501460131013701460164017301915199023052475
99
15152828282828424267
104104170170170178178273273273273273273273710710710710
175195180205250270390500550840970
1180150016922030254028883160390044305088632066906720
102901180015140170802609030530
210230220260310335480610680
103012001380178019922390304033783780458052306230721068907760
113901320016660187102729031930
SIZE
inches
DN FACE TO FACE G
FACE
TO FA
CEW
E COM
PACT H L M K S BARE STEM
VALVE WEIGHTGEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 300 (PN 50)Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75bar)
TYPE58
® To be confirmed after P/O placement.
457457521546559597635775724775902851902
1067978
106712451130119412451435130813841435165116891854193022102350
VALVITALIA reserves the right to change design, specification and materials without notice
12
BALL VALVES TYPE 58 (Overall Dimensions)
153153204204254254305305337388388439489489540591591635686737737782832877978
10231118116913841461
496597597674674762762902826902
1055978
105512321143123215241309139715241880165117781880®
®
®
®
®
®
496597597674674762762902826902
1055978
105512321143123215241309139715241880165117781880®
®
®
®
®
®
499601601677677766766905829905
1061982
106112421153124215371321141015371896166717941896®
®
®
®
®
®
310310350350390390430430475520520560600600645685685735770825825865895930
102010551160120513701460
457457546546597597673775724775902851902
1067978
106712451130119412451435130813841435165116891854193022102350
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
168168185185250250250250275310310355415415415415415415500500500500500500518518518518518660
424250505050505050666665868686868675969696969696
1180118118118118150
250250300300500500500500500600600600600600600600600600600600600600600600700700700700700700
310410410475475560560685600685855780855
1010940
101012601085116012601475132513851475165517501935201023302500
99
151528282828306767
104170170170170170178273273273273273273710710710710710
1160
210230225260290330452530690
101311301366171019002320296033503672437751075765612773678567
114201319017100192902924034460
270260285450362430562630840
123313601656205022502770352039004342517760076670707784479757
128701476018840211003109036170
SIZE
inches
DN FACE TO FACE G
FACE
TO FA
CEW
E COM
PACT H L M K S BARE STEM
VALVE WEIGHTGEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 400 (PN 64)Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)
TYPE58
® To be confirmed after P/O placement.
152152203203254254305305337387387438489489540591591635686737737781832876978
10221118116813841461
559660660787787838838991889991
11941092119413971295139716511448154916512083177819302083®
®
®
®
®
®
559660660787787838838991889991
11941092119413971295139716511448154916512083177819302083®
®
®
®
®
®
562664664791791841841994892994
12001095120014071305140716641461156216642099179419462099®
®
®
®
®
®
310310350350390390430430480525525565605605650690690740775830830870900940
103010701170121513801475
457457546546597597673775724775902851902
1067978
106712451130119412451435130813841435165116891854193022102350
215215255255295295345345375415415460495495540575575625660700700740785825905970
1080113012801400
168168250250250250275275310355355415415415415415415500500500500500500518518518518518660660
4242505050505050666565868686757575969696969696
118118118118118150150
250250500500600600600600600600600600600600600600600600600600600600600700700700700700700700
315410410480480560565695605695860785860
1020950
102012751090117012751490133514001490167017651950203023502530
99
28282828424257
104104170170170178178178273273273273273273710710710710710
11601160
230240232290312360478560713
105612001410185021002502319235503867472755076200660779378790
123301424018440207903104037140
290290292480392490588690873
12961430172022202500298237924150458755876477720076379107
10070138901593020320227503304038980
SIZE
inches
DN FACE TO FACE G
FACE
TO FA
CEW
E COM
PACT H L M K S BARE STEM
VALVE WEIGHTGEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”56”60”
ANSI CLASS 600 (PN 100)Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)
TYPE58
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
13
BALL VALVES TYPE 58 (Overall Dimensions)
® To be confirmed after P/O placement.
152152203203254254305305324375375425473473524572572619667714714762810857956
100611021149
610737737838838965965
1130102911301321121913211549®
1549®
®
®
®
®
®
®
®
®
®
®
®
610737737838838965965
1130102911301321121913211549®
1549®
®
®
®
®
®
®
®
®
®
®
®
613740740841841968968
1140103811401334123213341568®
1568®
®
®
®
®
®
®
®
®
®
®
®
330330370370410410460460500545540580620630675715715760790850850910960
10201120120012801330
508508597597648648749851800851978927978
11431067114313211207127013211511138414481511®
®
®
®
245245275275320320365365390430430490530530560620620670710755755815850885970
106011101150
185185250250275275310310355415415415415415500500500500500518518518518518518518660660
50505050505066666586868675759696969696
118118118118118118118150150
300300500500500500600600600600600600600600600600600600600700700700700700700700700700
381470470547547610610770680770920850920
111010301110136012001290136016351460155016351810190020702160
1515282842425757
104170170170178178273273273273273710710710710710710710
11601160
275300290360370430570690830
12401500175022702655297038054500473057706285720076159220
1079015065173802200024855
350405360420470560705820
10211525186021202720340035504530520056006800746084008860
106401233517000194242429027227
SIZE
inches
DN FACE TO FACE G
FACE
TO FA
CEW
E COM
PACT H L M K S BARE STEM
VALVE WEIGHTGEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”40”42”46”48”
ANSI CLASS 900 (PN 150)Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar)
TYPE58
VALVITALIA reserves the right to change design, specification and materials without notice
14
BALL VALVES TYPE 58 (Overall Dimensions)
181225267311352397
10221270142215751683®
10221270142215751683®
10381292144515971702®
385435500580670740
395465525630720810
310355415415641641
666586759696
600600600600600600
660790870990
11001215
67104170178273273
166024903450426051407200
197029904130509061608630
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
8”10”12”14”16”18”
ANSI CLASS 2500 (PN 420)Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar)
TYPE58
146146194194241241289289318362362407451451502534534597641686686730775819
705832832991991
113011301384125713841664153716641943®
1943®
®
®
®
®
®
®
®
705832832991991
113011301384125713841664153716641943®
1943®
®
®
®
®
®
®
®
711841841
10001000114611461407127614071686155916861971®
1971®
®
®
®
®
®
®
®
330330390390445445500500580640640705760760840895895975
104010701070116512301310
280280330330395395425425500560560590725725770815815905945
10351035106011401180
250250250250310310355355355415415415500500500500500518518518518518518518
5050505066666565658686759696969696
118118118118118118118
500500500500600600600600600600600600600600600600600700700700700700700700
430540540655655770770990680990
11801090118014251320142514801530165017301800187019852100
282828285757
104104104170170178273273273273273710710710710710710710
320420350480436560650860
10151515190021152656320036154620520053006540767087009270
1120013000
410520440610550730810
1150124518602360257032003900430054906000634077909080
10200107601289014920
SIZE
inches
DN FACE TO FACE G H L M K S BARE STEMVALVE WEIGHT
GEAR
WEIGHT WE RF/RTJ WE RF RTJ
6”8”X6”X8”
8”10”X8”X10”
10”12”X10”X12”
12”16”X12”X16”
14”16”
20”X16”X20”18”20”
24”X20”X24”22”24”
30”X24”X30”26”28”30”
36”X30”X36”32”34”36”
ANSI CLASS 1500 (PN 250)Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)
TYPE58
® To be confirmed after P/O placement.
® To be confirmed after P/O placement.
VALVITALIA reserves the right to change design, specification and materials without notice
Underground Installation• Stem extension
can be required for VALVITALIA ball valve.
• This feature permits use of valves in remote area, e.g. for underground installation.
• VALVITALIA can provide any kind of stem extension, with piping and fittings suitable to raise the body drain, the body vent and the emergency sealant injection fittings up the stand floor.
SPECIAL APPLICATIONS
15
Cryogenic service• Use range up to minus 196 °C. • Assure the maneuverability
at low temperature.• Materials and dimensions
are specially designed to suit low temperature.
Gas testfacilities
Operating Unit
Subsea service• Special materials and protective overlays
for extended life of service.• Reliable product in order to provide long lasting
service without maintenance.• Additional sea water gaskets
protect stem and external sealing areas.• Special protective coatings.
Different type of actuators and accessories are available
Gas Over Oil
PneumaticActuator
Lever
GearOperator
Subsea Hydraulic Actuator
Electric Actuator
VALVITALIA reserves the right to change design, specification and materials without notice
A Long Experience in Energy Equipment and one Goal:
The Cus tomer ’s sa t i s fac t ion .
Rivanazzano (PV) Plant
04.1
0 - 1
000
- VLT
.FW
.02VALVITALIA S.p.A.
Via Tortona, 69 - 27055 Rivanazzano (PV) ItalyPhone: +39.0383.945911 - Fax: +39.0383.9459962
E-mail: [email protected] site: www.valvitalia.com