full plastic fluorescent light fittings full plastic ... · the fluorescent (emergency) light...
TRANSCRIPT
The fluorescent (emergency) light enclosure base is glass fibre reinforced plastic (GFRP) whilst the transparent parts are ultra-violet resistant polycarbonate, both materials having high chemical resistance and mechanical strength. When closed the two parts are held together by the special spanner-key operated interlocking device, so as to compress the seal and simultaneously operate the interlock switch to connect the power supply. The explosion-protected electronic ballast, isolation switch, lamp holder and terminals etc are mounted inside of the full plastic fluorescent light fittings. There are two types of fluorescent light fittings - general one and emergency one. The fluorescent emergency light fitting has a battery for temporary backup. When the power supply to the installed light is normal the lamp is energised from the mains and the battery is fed by the charging circuit. When the power fails, the lamp is energised from the battery until either the power is restored or the battery is discharged..
http://www.iecex.com.au/ -1-
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
▲
▲ ▲
▲
▲ ▲
▲
Standard two-supply circuit design and End-Of-Life switch off function design when the life of the lamp tube is reached;
No-distorsion structural design and Equipped with the mechanical interlocking device and distance switch in
IIC class to enable the power off automatically when the diffuser is uncovered;
The ballast is certified separately;The ballast is equipped with the protective functions of open circuit, short
circuit and abnormity etc. of lamp tube;The emergency type has the indication of fault signal, the charge signal, the discharge signal.
IP65 ingress protection;explosion-protected
With interlock device, the transparent parts and enclosure can not energize to work to ensure safe use before completely sealing;
explosion-protected explosion-protected
B 90
A 0 A 0
B 90
I(cd/1000 lm)
B 90
A 0 A 0
B 90
0
20
40
60
80
100
120
140
180
200
45
90
27
0
315
0
A AB B
160
I(cd/1000 lm)
B B
0
315
27
0 90
45
A A
0
20
40
60
80
100
120
140
180
200
160
CZ0865 (2X18W) CZ0866 (2X36W)
LUMINOUS INTENSITY DISTRIBUTION CURVE
Mounting methods: (1) Ceiling type, chain type, pendant type, wall type and clamp type. (2) Platform fence type, platform flange type, road lamp type.
-2-
STRUCTURESTRUCTURE - GENERAL MODELS (NO EMERGENCY)
1
2
3
4
5
6
8
7
The Ex e enclosure is sealed with the foamedsealing gasket to ensure the IP65 protection.
Ex-protected ballast module.
The diffuser and enclosure are pressed tightlyand drive the switch off interlocking functionof Ex-protected distance switch throughinterlocking mechanism of open lock device.
Ex-protected terminal module of Ex e II.
Ex-protected lampholder of Ex e II
(Two-pin) G5, G13.
The Ex-protected distance switch module ofEx de IIC is operated by interlocking deviceand the enclosure can only be opened whenthe switch is in off position.
The Ex e gland and stopping plug.
With interlocking device, it can't be energizedwhen the diffuser and enclosure are not closedor sealed completely to ensure the safety.
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
Open / 开
-3-
STRUCTURESTRUCTURE - EMERGENCY MODELS
2
4
9
6
8
10
1
3
5
7
Ex-protected terminal module.
The Ex-protected battery module isthermostable in high-capacity.
Ex-protected inverter module.
Ex-protected lamp holder(Two-pin) G5, G13.
Ex-protected emergency signal lampmodule and three signal indicators.
Ex-protected distance switch moduleis operated by interlocking deviceand the enclosure can only be openedwhen the switch is in off position.
With interlocking device, it can't beenergized when the diffuser andenclosure are not closed or sealedcompletely to ensure the security.
The cable gland and stopping plug.
Ex-protected electronic ballast module.
The diffuser and enclosure are pressed tightly and drive the switch off interlocking function of
distance switch through interlocking mechanism of open lock device.
Ex-protected
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
Open / 开
STRUCTURESPECIFICATIONS
STRUCTUREORDER INFORMATION
Ex mark: Ex edq IIC T4 DIP A21 TA T4
Intended use: Can be used in zone 1 and zone 2
Can be used in zone 21 and zone 22
Degree of protection: IP65
Rated voltage: 200-240VAC 50/60Hz
Power factor: > 0.98
Energy efficiency index EEI=A22Terminals: L N PE each terminal 2×1.5-10mm
Cable entry: Moulded plastic 1×M25×1.5 cable gland,
Outside diameter of cable 8-17mm
Moulded plastic 2×M25×1.5 Stopping plug
Ex mark: Ex edqm IIC T4 DIP A21 TA T4
Intended use: Can be used in zone 1 and zone 2
Can be used in zone 21 and zone 22
Degree of protection: IP65
Rated voltage: 200-240VAC 50/60Hz
Power factor: > 0.98
Energy efficiency index EEI=A2
Recharging time: 24 h
Emergency starting time: 0.1 (S)
Emergency illuminating: >120 (min)2Terminals: L1 L2 L N PE each terminal 2×1.5-10mm
Cable entry: Moulded plastic 1×M25×1.5 cable gland,
Outside diameter of cable 8-17mm
Moulded plastic 2×M25×1.5 Stopping plug
No emergency With emergency
CZ0865 / 2×18W -B+XY
CZ0866 / 2×36W -B+XY
2×18W
2×36W
max 0.2A
max 0.39A
Order No.WeightCurrentPowerCode of
lampholderEmergency
G13 Two pinlampholder
5kg
7.9kg
CZ0865 / 2×18W YJ-B+XY2×18W
CZ0866 / 2×36W YJ-B+XY2×36W
1×18W
1×36W
6.8kg
9.9kg
No emergency
With emergency
X: Code of cable gland.
Y: Mounting accessories order number. See pages 5~6.
B 8-17mm
C
D
E
F
G
H
I
Code
One moulded plastic M25X1.5 metal cable gland, two moulded plastic M25X1.5 stopping plugs
One brass CZ0221/M25X1.5 metal cable, two moulded plastic M25X1.5 stopping plugs 8-17mm
8-17mm
8-17mm
11-15mm
11-15mm
11.5-16mm
11.5-16mm
Two moulded plastic M25X1.5 cable glands, one moulded plastic M25X1.5 stopping plug
Two brass CZ0221/M25X1.5 metal cable glands, one moulded plastic M25X1.5 stopping plug
One brass CZ0227/M25X1.5-G3/4” increasd safety metal cable gland, two moulded plastic M25X1.5 stopping plugs
Two brass CZ0227/M25X1.5-G3/4” increased safety metal cable glands, one moulded plastic M25X1.5 stopping plug
One brass CZ0226/M25X1.5 (G02) increasd safety metal cable gland (stopping boxes), two moulded plasticM25X1.5 stopping plugs
Two brass CZ0226/M25X1.5 (G02) increased safety metal cable glands (stopping boxes), one moulded plasticM25X1.5 stopping plug
Specifications Cable diameter
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
-4-
-5-
STRUCTUREMOUNTING ACCESSORIES
D622
D623
D624
D621
J200
J400
G1 / " Φ42 ~ 45mm41
G2" Φ59 ~ 62mm
G2" Φ59 ~ 62mm
YM1
G1 / " Φ42 ~ 45mm41
G1 / " Φ47 ~ 50mm21
G1 / " Φ47 ~ 50mm21
J300
D8709/1
D8709/2
D8710/1
D8710/2
D8711/1
D8711/2
D8712/1
D8712/2
D8713/1
D8713/2
J200/304
J300/304
J400/304
D621/304
Illustration Descriptions Unit Order No.
Support for ceiling type
Material: 304 stainless steel
Material: Fine quality steel with galvanized surface Set
Accessories for pendant type
Accessories for chain type
Accessories for bracket type M8 bolt for user mountMaterial: Fine quality steel with sprayed plastic surface
M8 expansion suspension hook bolt for user mount
Set
Set
Set
Set
Accessories for clamp type M8 bolt mount
Material: Fine quality steel with galvanized surface
Material: Stainless steel
Material: Fine quality steel with galvanized surface
Material: Stainless steel
Material: Fine quality steel with galvanized surface
Material: Stainless steel
Set
Set
Set
Set
Set
Set
Lamp pole of bend rod type
Lamp pole of fence type
Lamp pole of flange type
Street light pole of single arm
Street light pole of double arms
Pre-embedded framework
Used for 14W, 18W fluorescent light fittings
Used for 28W, 36W fluorescent light fittings
Used for 14W, 18W fluorescent light fittings
Used for 28W, 36W fluorescent light fittings
Used for 14W, 18W fluorescent light fittings
Used for 28W, 36W fluorescent light fittings
Used for 14W, 18W fluorescent light fittings
Used for 28W, 36W fluorescent light fittings
Used for 14W, 18W fluorescent light fittings
Used for 28W, 36W fluorescent light fittings
Used for street light
Set
Set
Set
Set
Set
Set
Set
Set
Set
Set
Set
Set D8714/2-M25Metal earthing nut 2-M25X1.5Earthing nut
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
7 mounting holes for user mount
-6-
STRUCTURESPARE PARTS
CZ0207-1
CZ0403/G5
CZ0403/G13
CZ0818/2×14W
CZ0818/2×28W
CZ0818/2×18W
CZ0818/2×36W
CZ0818/1×14W YJ
CZ0818/1×28W YJ
CZ0818/1×18W YJ
CZ0818/1×36W YJ
CZ0819/4.5Ah 6V
CZ0804 / 0.5A
CZ0819/4.5Ah 7.2V
CZ0804 / 5A
D601
Explosion-proof fuser module
Ex mbe II, 5A
Ex mbe II, 0.5A
Piece
Piece
Explosion-roof battery module
Ex e II, 4.5Ah/7.2VSet
Ex e II, 4.5Ah/6VSet
Emergency power: 1×36W, Used for T8 typefluorescent light fitting
Ex qe II
Piece
Ex qe II
Emergency power: 1×18W, Used for T8 typefluorescent light fitting
Emergency power: 1×28W, Used for T5 typefluorescent light fitting
Emergency power: 1×14W, Used for T5 typefluorescent light fitting
Piece
Piece
PieceExplosion-proof inverter module
Explosion-proof ballast module
Power: 2×36W, Used for T8 energy saving typefluorescent light fitting Piece
PiecePower: 2×18W, Used for T8 energy saving type
fluorescent light fitting
Power: 2×28W, Used for T5 energy saving typefluorescent light fitting Piece
Power: 2×14W, Used for T5 energy saving typefluorescent light fitting Piece
Piece
Piece
Piece
Set
Explosion-proof lampholder
Ex e II
Ex de IIC,Contact 2NC (2NC)
Explosion-proof distanceswitch module
Explosion-roof G5 lampholder, Used for T5fluorescent lamp tube of energy saving type
Explosion-roof G13 lampholder, Used for T8fluorescent lamp tube of energy saving type
M8/SW13 Sleeve spanner Used for CZ0865 CZ0866Material: Fine quality steel with galvanized surface
Order No.UnitDescriptionsIllustration
SetEx mb II
Three colors for LED: red, yellow, green
CZ0802/1
Explosion-proof emergencyindicator module
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
-7-
STRUCTUREINSTALLATION AND DIMENSION
4-Φ10
10
0
2×14/18W(400mm)
2×28/36W(800mm)
210
30°
23
0
222
14
5
50
0
2-M8
2×14/18W(725mm)
2×28/36W(1335mm)
2×14/18W(400mm)
2×28/36W(800mm)
33
4-M8 2004-Φ9
16
5
Ceiling type
Chain type Pendant type
4-Φ777
30
0Nut M8
Bracket type
Bend rod type
Clamp typeG3/4
10
00
2×14/18W(800mm)
2×28/36W(1300mm)
。70
33
2×14/18W(400mm)
2×28/36W(800mm)
4-Φ
9
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866
STRUCTURES
N L1 L2 PE
N
L
AC220V
Emergency fluorescent light fittings
Normal illumination switch
CIRCUIT CONNECTION FOR EMERGENCY LIGHT FITTINGS
-8-
STRUCTUREINSTALLATION AND DIMENSION
□400
4-Φ25
□297
Flange typeFence type
Street light pole of single arm Street light pole of double arms Street light concrete base diagram
Pre-embeddedframework
30
00
70 °
2×14/18W(800mm)
2×28/36W(1300mm)
Φ47
33 2×14/18W(400mm)
2×28/36W(800mm)
4-Φ
9
6000
70 °
2×14/18W(800mm)
2×28/36W(1300mm)
33 2×14/18W(400mm)
2×28/36W(800mm)
4-Φ
9
6000
70 °
2×14/18W(800mm)
2×28/36W(1300mm)
33 2×14/18W(400mm)
2×28/36W(800mm)
4-Φ
9
2×14/18W(800mm)
2×28/36W(1300mm)
70°25
00
70 °
2×14/18W(800mm)
2×28/36W(1300mm)
Φ47
33 2×14/18W(400mm)
2×28/36W(800mm)
4-Φ
9
G3/4"
Full plastic fluorescent light fittingsFull plastic fluorescent emergency light fittings
CZ0865_0866