fuel & lubricaton section - dragon

Modern Ag Parts - Beaumont, Texas - Order Toll-Free 1-888-404-8908 - Fax Toll-Free 1-888-404-8910

402

FUEL & LUBRICATION PRODUCTS

FUEL & LUBRICATON SECTION



403

PBL Fuel Transfer PumpPBL Fuel Meter

PBL Oil Transfer Pump

12 VOLT PUMP MODEL P12FSHIPPING WEIGHT 20INLET SIZE 1" NPTOUTLET SIZE 3/4" NPTPOWER CORD 20 FOOTAMP DRAW 12HOSE 12 FOOT 3/4"DUTY CYCLE 30 MIN.MAXIMUM PRESSURE 10 PSISUCTION PIPE 1" X 33" LONGRATED FLOW 12.5 GPM

WT. 27 LBS

FEATURES:• Electric motor driven gear type pump• Self priming, positive displacement design• Mounts directly on barrel with bung adaptor supplied• Pumps oil up to SAE 140 at 55º• Built in bypass valve and on-off switch• Built in 30 inch three prong power cord• 1/2 horsepower motors supply the necessary power to pump viscous fluids• Comes complete with 35" suction pipe, 8 foot 3/4 dia. hose, and nozzle• Has 1" NPT inlet and 3/4" outlet ports• Can be used to transfer used oil with suction screen 10117

WARRANTY- 1 Year From the Date of PurchaseRepair or Replace at PBL's Discretion

Call 219-665-3841 for additional Warranty information.

PBL FUEL TRANSFER PUMP

PBL FUEL METER

PBL OIL TRANSFER PUMP

MFG. NO.FP12

DESCRIPTION12 VOLT PUMP

PART NO.426-101

FLOW CAPACITY OF 12.5 GPM.

LOW CURRENT DRAW (12 AMPS @ 12 VOLTS DC)

BUILT IN SEALED ELECTRIC CONNECTOR.

ENCLOSED HEAVY DUTY SWITCH.

LIGHT WEIGHT CORROSION RESISTANT ALUMINUMCONSTRUCTION.

FACTORY LUBRICATED MOTOR BEARINGS NEVERNEED SERVICE.

ALL PUMPING PARTS DESIGNED TO PROVIDE EASYACCESS WITHOUT BREAKING ANY ELECTRICAL ORPUMPING CONNECTIONS.

THE 12 VOLT PBL FUEL TRANSFER PUMP IS DESIGNEDFOR LONG LIFE AND EFFICIENT OPERATION UNDERDEMANDING CONDITIONS. AN IMPROVED MOTOR ANDGEAR DESIGN ALLOWS GREATER PUMP DELIVERY (UP TO12.5 GPM) AT REDUCED CURRENT DRAW (12 AMPS).

SHIPPED COMPLETE WITH ALL MOUNTING AND INSTALLATION HARDWARE INCLUDING HOSE, NOZZLE,POWER CORD AND INSTRUCTION.

POSITIVE DISPLACEMENT, SELF PRIMING GEAR PUMPDESIGN.

BUILT-IN RELIEF VALVE AND STRAINER.

SPECIALLY DESIGNED PERMANENT MAGNET MOTOR. 1/4 HP, 12 VOLT DC 30 MINUTE DUTY CYCLE.

SEE NEXT PAGE FOR PARTS BREAKDOWN

WARRANTY- 1 Year From the Date of Purchase, Repair or Replace at PBL's DiscretionCall 219-665-3841 for additional Warranty information.

THE PBL FUEL METER MEASURES FLUIDS UP TO 50 PSI, WITHA RATED FLOW OF UP TO 20 GALLONS PER MINUTE. COMESWITH 3/4" NPT INLET AND OUTLET. EASY TO READ GALLONMEASUREMENT. WILL WORK ON GRAVITY FLOW TANKS

THIS 115 VOLT PUMP IS DESIGNED SPECIFICALLY TOTRANSFER BULK OILS AND HYDRAULIC FLUIDS.



SEE PG. 415 FOR PARTS BREAKDOWN

PART NO.426-107426-255

DESCRIPTIONOIL TRANSFER PUMPSUCTION SCREEN

MFG. NO.OP11510117

PART NO.426-111

1 Year Warranty!


404

FUEL & LUBRICATION PRODUCTSPBL 426-101 Repair Parts List

PBL 426-101 REPAIR PARTS LIST

ITEM NO.

CAT. NO.

PART NO. DESCRIPTIONITEM

NO.CAT. NO. PART NO. DESCRIPTION

1 4001-1* BODY ASSEMBLY 24 10024 8-32 X 3/8 PHILLIPS SCREW (2)

2 4002 GEAR COVER 25 10025 6-32 X 1/4 PHILLIPS SCREW

3 426-229 4004 ELECTRICAL COVER 26 4009 10-32 NUT (2)

4 426-228 4005 SWITCH COVER 27 426-224 10027 BUNG ADAPTOR

5 426-202 10005 GEAR (2 REQ'D) 28 426-220 10028-1 INLET FITTING

6 426-243 10006 SHAFT, GEAR (2 REQ'D) 29 10029 WIRE NUT (12 VOLT) (2)

7 10007 STRAINER COVER WIRE NUT (115 VOLT) (3)

8 426-239 10008 SWITCH BRACKET 30 10030 FLAG TERMINAL (2)

9 426-240 10009 SWITCH ACTUATOR CAM 31 10028-2 UNION NUT

10 426-238 4008-1 SWITCH ACTUATOR ASS'Y 32 10032 BATTERY CLAMP (2)

*11 426-209 10011 SWITCH 10032-1B BLACK SLEEVE

*12 426-214 10012 SCREEN 10032-1R RED SLEEVE

13 426-203 10013 RELIEF VALVE POPPET 33 426-241 10033 STRAIN RELIEF

14 426-212 10014 RELIEF VALVE SPRING *34 426-219 10053 SEAL, STRAINER COVER

*15 426-213 10015F SEAL, RELIEF VALVE *35 426-208 10035 POWER CABLE (12 VOLT)

16 426-204 10016F SEAL, GEAR COVER 36 10036 FUSE HOLDER

17 426-205 10041 DRIVE KEY 37 10037 20 AMP FUSE

18 426-225 10063 INLET GASKET *38 426-210 10039 3/4" HOSE ASS'Y (NOT SHOWN)

19 4003-1 ELEC. HSNG. 12 VOLT 39 426-201 4007 12 VOLT MOTOR (FP12)

4003-2 ELEC. HSNG. 115 VOLT *39 426-226 4006 115 VOLT MOTOR (F115P)

20 10020F SHAFT SEAL *40 426-217 10043 NOZZLE COVER

21 10021 5/16-18 X 3/4 HEX BOLT (4) 41 426-211 10046 SUCTION PIPE

22 10022 1/4-20 X 3/4 HEX BOLT (10) 42 10047 NOZZLE GUIDE

23 10023 10-24 X 3/8 HEX BOLT (4) 43 40103/4" NPT OUTLET FITTING

(NOT SHOWN)

* = SHIPPED VIA UPS DIRECT FROM FACTORY 44 10002 OUTLET COVER (NOT SHOWN)

ITEMNO.

PARTNO. MFG. NO DESCRIPTION ITEM

NO.PARTNO. MFG. NO. DESCRIPTION

* = SHIPPED VIA UPS DIRECT FROM FACTORY



405

PBL 426-107 Repair Parts List

PBL 426-107 REPAIR PARTS LIST

ITEMNO.

PARTNO. DESCRIPTION

QTY.ITEMNO.

PARTNO. DESCRIPTION

QTY.

1

2

3

4

5

6

7

8

9

10

11

12

6001

6002

6003

6004

6005

6006

6007

6008

6009

6010

6011

6011-1

6012

PUMP BODY

PUMP/MOTOR ADAPTER

PUMP GEAR

SHAFT SEAL

GEAR SHAFT

DOWEL PSI

115 VOLT AC POWER CORD

O’RING SEAL

3/8-18 SH CAP SCREW

RELIEF VALVE BALL

115 VOLT AC MOTOR

12 VOLT DC MOTOR

1/2 NPT PIPE PLUG

1

1

2

1

2

2

1

1

4

1

1

1

1

13

14

15

16

17

18

19

20

21

*

*

*

6013

4010

10011

10021

10027

10028-2

10028-1

10029

10033

6014

10046

30025F

1

1

1

4

1

1

1

2

1

1

1

1

RELIEF VALVE SPRING

3/4 NPT STREET EL

SWITCH

5/16-18 HWH CAP SCREW

BUNG ADAPTER

SWIVEL NUT

INLET FITTING

WIRE NUT

STRAIN RELIEF

NOZZLE

SUCTION PIPE

HOSE PETROLEUM

* PART NOT SHOWN


406


FEATURES:

•LIGHTWEIGHT•STAINLESS STEEL PISTON LINER•STAINLESS STEEL INLET SCREEN•STAINLESS STEEL SHAFT TO PREVENT CORROSION•HARDENED STEEL PIVOT PINS•TEFLON PISTON SEALS FOR LONG LIFE AND SMOOTH OPERATION•INTEGRAL NOZZLE HOLDER IN HOUSING PROVIDES A NOZZLE HOLDER AND

PREVENTS CONTAMINANTS FROM ENTERING HOSE•BUNG ADAPTOR ADJUSTABLE SO PUMP CAN BE ROTATED TO ANY POSITION•ONE QUART PER STROKE GIVES FAST EFFECIENT TRANSFER•LOCKING MECHANISM TO PREVENT THEFT•UNITS COME COMPLETE WITH 8' HOSE, DIE CAST ALUMINUM NOZZLE, AND

INLET SUCTION PIPE AND BUNG ADAPTOR.

PBL Piston Hand Pump

ALL PARTS ABOVE SHIPPED VIA U.P.S. DIRECT

FROM FACTORY

PART NO.427-5400

MODEL NO.: H6FINLET SIZE: 1" NPTOUTLET SIZE: 3/4" NPTHOSE: 3/4" X 8' PETROLEUM(BUNA)SEALS: BUNA NSHIPPING WEIGHT: 12 LBS.



PARTS BREAKDOWN FOR HAND PUMP ABOVE

PBL PISTON HAND PUMP

ITEM NO.

CAT. NO.PART

NO.DESCRIPTION QTY.

1 427-5401 30001 PUMP HOUSING 1

2 427-5402 30002 PISTON & SHAFT 1

3 427-5403 30022 1/4-20 X 3/8 BOLT 8

4 427-5404 30004 POPPET ASSEMBLY 4

5427-5405 30026 COVER SEAL, FUEL 1

427-5406 30026C COVER SEAL, CHEMICAL 1

6 427-5407 30006 SEAL RETAINER 1

7 427-5408 30007 COVER 1

8 427-5409 30008 LATCH 1

9 427-5410 30009 LINK BRACKET 2

10 427-5411 30010 LATCH PIN 1

11 427-5412 30011 CLEVIS PIN 2

12 427-5413 30012 PISTON PIN 1

13 427-5414 30013 PISTON LINER 1

14 427-5415 30014 SPRING RETAINER 4

15 427-5416 30023 10-24 X 1/2 SCREW 2

16 427-5417 30028 HANDLE 1

17427-5418 30024 SHAFT SEAL FUEL 1

427-5419 30024C SHAFT SEAL CHEMICAL 1

18 427-5420 30018 HANDLE GRIP 1

19 427-5421 30019 BUNG ADAPTOR 1

20 427-5422 30020 COTTER PIN 3

21 427-5423 30021 PISTON SEAL 2

22 427-5424 30027 INLET SCREEN 1

23 427-5425 10046 STANDPIPE 1

24 427-5426 30030 3/8-16 X 3/4 BOLT 2

N/S

427-5427 30025 3/4 X 8' FUEL HOSE 0

427-5428 30025C 3/4 X 8' CHEMICAL HOSE 0

427-5429 30017 NOZZLE 1

ITEMNO. PART NO. MFG.

NO. DESCRIPTION QTY.



407

Fill-Rite Fuel Transfer PumpFill-Rite Series 20 Piston Drum Pumps

MODEL 1210C12 VOLT DC

PART NO.427-1210

FILL-RITE SERIES 20 PISTON DRUM PUMPS

This industry standard DC pump dispenses up to 13 GPM. The pump weighs less than 27 lbs. (12.2 KG.) with hose and nozzle and has a draw that's easy on the DC power source - A MERE 18-20 AMPS.

• Explosion-proof 1/4 HP motor with permanent magnet and ball bearings.

• Heavy-duty switch, thermal over-load protection and junction box.

• Heavy-duty 3-wire battery cable.

• Auotmatic bypass valve.

• Built-in check valve and strainer.

• 12 FT. (3.7M) hose with static groundwire.

• Manual nozzle with holder that protects against dirt and contamination.

• 2 IN. base for tank openings.

• Telescoping steel suction pipe from 22" to 40" (56CM to 102CM).

• Pump may be padlocked.

• 30 Minute Duty Cycle

• Inlet 1" NPT Female Suction Port

• Outlet 3/4" NPT Female

The economical Fill-Rite Series 20 Air-operated Transfer Pump and Hand Lever Piston Pump safelytransfer tough industrial fluids including: engine oils, gear oils, anti-freeze, mild acids, even paraffin.These versatile and easy to use pumps are perfect for barrels, drums and storage tanks.

• Adaptable for a variety of containers: barrels, storage tanks & drums• Self-priming• Equipped with anti-drip nozzle which prevents splashing for safer fluid transfer.• Locking ring for 360° alignment versatility• Telescopic suction pipe for drums up to 36" (91.2 cm) in depth

Besides "the reliable red pump" above, Fill-Rite offers many other DC-AC pumps,and meters to make up the Fill-Rite line. For example:

• Quart Stroke Pumps• Heavy Duty Rotary Hand Pumps• AC Utility Pumps, both Standard and High-Flow• Flow Meters - Standard and LCD (Liquid Crystal Display)• Cabinet Pumps• Fuel Management Systems

Fill-Rite has pumps and accessories for Recreational, Agricultural, Industrial and Fleet use. Call us today so we can help you with your fuel pump requirements.

Warranty: 1 year from purchase or 1-1/2 years from manufacturing.Call 1-800-766-7524 for details.

427-20


FILL-RITE FUEL TRANSFER PUMP

MFG. NO.20

PART NO.427-20

SEE NEXT PAGESFOR PARTS BREAKDOWN


408


PARTS BREAKDOWN FOR 427-1210 FILL-RITE PUMP

SEE PARTS LISTING NEXT PAGE

Parts Breakdown for 427-1210 Pump



409

Parts Listing for 427-1210 Fill-Rite Pump

.ONMETI .ON.TAC .ONTRAPDLO .ONTRAPWEN NOITPIRCSED .YTQ

1 3246F0021 3246F0021 )C0021(GNISUOHPMUP 1

2-0021 5046F )B0021(DLOGNISUOHPMUP 1

2 2131-724 03-0021 5456F GNIRAEBLLAB 2

3 1356F0021 1356F0021 )2.TI.LCNI()C0021(V21.YSSAERUTAMRA 1

4231-724 A72-0021 1356F )2.TI.LCNI()B0021(V21.YSSAERUTAMRA 1

A3 A3-0042 3356F )2.TI.LCNI(V42.YSSAERUTAMRA .TLA1

4 2521-724 A62-0021 6256F YSSATENGAMDNAEMARFROTOM 1

5 61-0021 5746F TLOBURHT5X02-4/1 2

6 3-0021 0146FGNITSACROTOM

)25&,15,02,91.SMETI.LCNI(1

7 0231-724 A4-0021 4146FGNIHSUB/WETALPHCTIWS

)64&,54,44,32.SMETI.LCNI(1

8 3131-724 14-0021 0066F V21ROTCETORPLAMREHT 1

A8 6-0042 2066F V42ROTCETORPLAMREHT .TLA1

9 5821-724* 82-0021 5356F YLBMESSAREDLOHHSURB 2

01 7821-724* 3-92-0021 1456F0021 YLBMESSAHSURBEVITISOP 1

11 8821-724 24-0021 5066F YLBMESSAERIWEVITISOP 1

21 .V21ETALPEMANROTOM 1

31 06-008 0004F SMHP61/5X8.ON 2

41 95-008 0993F REHSAWKCOLLANRETXE8.ON 4

51 3921-724 64-0021 5266F YLBMESSATFAHSHCTIWS 1

61 6821-724* 1-92-0021 2956F0021 YLBMESSAHSURBEVITAGEN 1

71 7531-724 4213F 4213F )A0021(HCTIWSENIL 1

A71 3031-724 84-007 0713F0021 )C&B0021(HCTIWSENIL 1

81 02-0021 5946F REVOCXOBNOITCNUJ 1

91 1231-724 2-34-0021 2166F )6METI/W.LCNI(THW/.GENDAELERIW 1

02 2231-724 1-34-0021 1166F )6METI/WLCNI(.KLB/.SOPDAELERIW 1

12 6231-724 82-007 0692F )UEPYT(WERCSEVIRD61/5X2.ON 2

22 71-0021 0846F SMHP4/3X42-01.ON 01

32 15-0021 0566F )7METI/W.LCNI(NIP2/1X23/5 1

42 1721-724 41-0021 5646F RETPADAGNUB 1

52 4921-724 11-001 0670F NEERCS 1

62 5921-724 31-001 0970F TEKSAGTELNI 1

72 8721-724 32-0021 0156F YLBMESSAEVLAVKCEHC 1

82 9721-724 01-007 6572F EVLAVSSAPYB 1

92 1131-724 21-0021 5546F )121-(TEKSAGSSAPYB 1

03 0821-724 21-007 0772F GNIRPSSSAPYB 1

13 7231-724 S11-0021 4646F PACSSAPYB 1

23 9131-724 66-0021 1276F SCHH4/3X02-2/1 8

33 5637F0024 5637F0024 )C0021(NOBRAC-ENAV 5

807-724 201-0021 1346F )B0021(NOBRAC-ENAV 5

PARTS MARKED * ARE STOCK.ALL OTHER PARTS SHIPPED VIA DIRECT FROM FACTORY.


PART NO. OLD MFG. NO. NEW MFG. NO.

PARTS LISTING FOR427-1210 FILL-RITE PUMP


410

FUEL & LUBRICATION PRODUCTSParts Listing for 427-1210 Fill-Rite Pump

PARTS LISTING FOR 427-1210FILL-RITE PUMP (CONT.)

.ONMETI .ON.TAC .ONTRAPDLO .ONTRAPWEN NOITPIRCSED .YTQ

43 6637F0024 6637F0024 )C0021(ROTOR 1

907-724 7346F 7346F )B0021(ROTOR 1

53 5031-724 9-0021 0446F YEKROTOR 1

63 8-0021 5346F REVOCROTOR 1

73 5621-724 22-0021 5056F )831-(TEKSAGREVOCROTOR 1

83 8031-724 V01-0021 6446F YSSALAES 1

93 52-207 0043F LETEERTS4/3 1

04 901-006 0222F SCHH4/3X81-61/5 2

14 5721-724 05-0021 5466F REVOCELZZON 1

24 54-0021 0266F REVELHCTIWS 1

34 72-007 0592F TUNKCOL81X61/5 1

44 82-006 0591F )7.TI/W.LCNI()UEPYT(WERCSEVIRD8/5X41.ON 1

54 8331-724 12-0021 0056F )7.TI/W.LCNI(KNILGNIKCOL 1

64 63-051 0441F )7.TI/W.LCNI(REHSAWGNIRPS4/1 1

74 ETALPEMANPMUP 1

84 91-207 0033F REHSAWKCOL.TXE4/1 2

94 55-0021 5966F PILCRENIATER 2

05 .V42-LACED .TLA1

15 19-0021 6276F )6.TI/W.LCNI(.NRG-ERIWDNUORG 1

25 29-0021 7276F )6.TI/W.LCNI()UEPYT(WERCSEVIRD"8/3X01.ON 1

35 8921-724 45-0021 0966F ROTCENNOCELBAC 1

45 1-32-207 0433F ELPPIN2/11X4/3 1

55 0331-724 51-0021 0746F GNITTIFRETEM 1

65 9231-724 421-006 0032F SCHH4/31X81-"61/5 2

75 9031-724 51-007 0082F )85.TI/W.LCNI()812-(TEKSAGGNIR-O 1

85 SA18-008 2704F )75.TI.LCNI(RETEMA008 1

95 5-32-207 5633F ELPPIN4X"4/3 1

06 42-207 0933F WOBLE"4/3 1

16 9921-724 75-007 6313F ELZZONDAEL-ON"4/3 1

26 0031-724 65-007 5313F ESOH'21 1

36 SA25-0021 5566F )06&95,85,75,65,55,45.STI.LCNI(YSSARETEM TPO1

6921-724 S89-151 9381F EPIPNOITCUS 1

7131-724 2337F-0021 2337F ELBACREWOP'51 1

8521-724 07-0021 B0021ROFTIKRIAPER

5531-724 9378FTK0024FEHTSNIATNOCWENC0021ROFTIKRIAPER

SMETIGNIWOLLOF52 4921-724 11-001 0670F NEERCS 1

62 5921-724 31-001 0970F TEKSAGTELNI 1

82 9721-724 01-007 6572F EVLAVSSAPYB 1

92 21-0021 5546F )121-(TEKSAGSSAPYB 1

33 5637F0024 5637F0024 NOBRAC-ENAV 5

43 6637F0024 6637F0024 ROTOR 1

53 5031-724 9-0021 0446F YEKROTOR 1

73 5621-724 22-0021 5056F )831-(TEKSAGREVOCROTOR 1

83 8031-724 V01-0021 6446F YSSALAES 1

ALL PARTS ABOVE SHIPPED VIA DIRECT FROM FACTORY

PART NO. OLD MFG. NO. NEW MFG. NO.



411

Fill Rite Fuel Transfer Pump

MODEL 421012 VOLT DC

Use 900 series meters only.

FILL-RITE FUEL TRANSFER PUMP



PART NO.427-4210

• Up To 20 GPM / LPM.

• Full 1/4 HP 12V DC-22 amp motpr.

• Thermal overload protector.

• Integral check value.

• Built-in bypass value.

• Sealed ball bearing.

• Integral thermal relief value.

• Includes 1" x 15" hose and manual nozzle.

• 2 IN. base for tank openings.

• Telescoping steel suction pipe from 22" to 40" (56CM to 102CM).

• Pump may be padlocked.

• 30 Minute Duty Cycle.

• Inlet 1" NPT Female Suction Port.

• Outlet 1" NPT Female.


412


PARTS LISTING FOR 427-4210 FILL-RITE PUMPITEM NO. CAT. NO. OLD PART NO. NEW PART NO. DESCRIPTION QTY.

1 4200F7359 F7359 PUMP HOUSING 1

2 427-1312 1200-30 F6545 BALL BEARING 2

3 427-1324 1200-27A F6531 ARMATURE ASSY. (INCLUDES ITEM 2) 1

4 427-1252 1200-26A F6526 MOTOR FRAME AND MAGNET ASSY 1

5 1200-16 F6475 1/4-20 X 5 THRU BOLT 2

6 1200F6444 F6444 MOTOR CASTING

(INCL. ITEMS. 19, 20, 51, & 52)1

7 1200F6445A F7424SWITCH PLATE W/ BUSHING

(INCL. ITEMS. 23, 44, 45, & 46)1

8 1200F6645 F6645 THERMAL PROTECTOR 1

9 1200F7329 F7329 BRUSH HOLDER ASSEMBLY 2

10 1200-29-1 F6541 NEGATIVE BRUSH ASSEMBLY 1

11 35F1396 F1396 #8-18 x 1/2 PHTS (TYPE B) 1

12 MOTOR NAMEPLATE 12V. 1

13 1200F4018 F4018 #8-32 x 3/8 PHMS (TYPE TT) 2

14 F3167 F3167 5/16 SPING WASHER 1

15 F3149 F3159 SWITCH SHAFT ASSEMBLY 1

16 1200-29-3 F6592 POSITIVE BRUSH ASSEMBLY 1

17 4200F3305 F3305 LINE SWITCH 1

18 1200-20 F6495 JUNCTION BOX COVER 1

19 1200F6668 F6668 WIRE LEAD NEG./BLK. (INCL W/ITEM 6) 1

20 1200F6661 F6661 WIRE LEAD POS./RED (INCL W/ ITEM 6) 1

21 G1906 G1906 3/32 BLIND RIVET 2

22 F4015 F4015 #10-32 x 3/4 PHMS (TYPE TT) 10

23 1200-51 F6650 5/32 X 1/2 PIN (INCL. W/ITEM 7) 1

24 427-1271 1200-14 F6465 BUNG ADAPTER 1

25 427-1294 100-11 F0760 SCREEN 1

26 427-1295 100-13 F0790 INLET GASKET 1

27 427-1278 1200-23 F6510 CHECK VALVE ASSEMBLY 1

28 427-1279 F2756 F2756 BYPASS VALVE 1

29 427-1311 1200-12 F6455 BYPASS GASKET (-121) 1

30 1200F2770 F2770 BYPASS SPRING 1

31 427-1327 1200-11S F6464 BYPASS CAP 1

32 427-1319 1200-66 F6721 1/2-20 X 3/4 HHCS 8

33 4200F7365 F7365 VANE - CARBON 5

ALL PARTS SHIPPED VIA UPS DIRECT FROM FACTORY

PARTS LISTING CONTINUED ON NEXT PAGE

MAP NO.

PARTS LISTING FOR 427-4210 FILL-RITE PUMP


ALL PARTS SHIPPED VIA DIRECT FROM FACTORY



413


ITEM NO.

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

51

52

53

54

58

61

62

PART NO.

427-1305

427-1265

427-1308

427-1296

427-1317

OLD MFG. NO.

4200F7366

1200-9

1200-8

1200-22

1200-10V

800-119

600-109

F6688

F6674

700-27

600-28

F6686

150-36

785F8209

F3162

1200-91

1500-33

1200F7321

304-226

900F8515

700-65

300-44

151-98S

1200F7332

DESCRIPTION

ROTOR

ROTOR KEY

ROTOR COVER

ROTOR COVER GASKET (-138)

SEAL ASSY

1” STREET EL

5/16 - 18 X 3/4 HHCS

NOZZLE COVER

SWITCH LEVER

5/16 X 18 LOCKNUT

NO. 14 X 5/8 DRIVE SCREW (TYPE U) (INCL. W/IT. 7)

LOCKING LINK (INCL. W/IT. 7)

1/4 SPRING WASHER (INCL. W/IT. 7)

PUMP NAMEPLATE

1/4 EXT. LOCKWASHER

5/16 RETAINER RING

GROUND WIRE - GRN. (INCL. W/IT. 6)

#8-32 X 3/8 GROUND SCREW (TYPE F) (INCL. W/IT. 6)

CABLE CONNECTOR (INCL. W/ POWER CABLE)

1 X 1 1/2 NIPPLE

901 METER ASSY. (INCLUDES ITEM 54)

1” LEADED NOZZLE

1” X 15’ HOSE

SUCTION PIPE

15’ POWER CABLE

QTY.

1

1

1

1

1

1

2

1

1

1

1

1

1

1

2

1

1

1

1

Opt.

Opt.

1

1

1

1

NEW MFG. NO.

F7366

F6440

F6435

F6505

F6446

F4400

F2220

F6688

F6674

F2950

F1950

F6686

F1440

F8209

F3162

F6726

F7342

F7321

F9026

F8515

F3125

F7773

F1839

F7332

PARTS LISTING FOR 427-4210 FILL-RITE PUMP (CONT.)


You can find all these items and more onour web site: www.modernusa.com

Make Modern Ag PartsYour #1 choice!


414

FUEL & LUBRICATION PRODUCTSFill-Rite Fuel Pump

RUGGEDNESS OF CAST IRON & THE PORTABILTYOF DC POWER, THIS PUMP DELIVERS UP TO 13 GPM/ 49 LPM. THE SD1202 IS DESIGNED FOR TANK OR BARREL MOUNTING.

12 VOLT DC PUMPMODEL SD1202

Warranty: 1 year from purchase or 1-1/2 years from manufacturing.

Call 1-800-766-7524 for details.

FEATURES:• Thermally protected, UL/cUL listed, explosion-proof, 1/4 HP motor.• 2” NPT, no tank adapter needed.• 3/4” X 10’ hose, manual nozzle & 15’ power cable.• 1” polymer adjustable suction pipe.• Postive displacement, rotary vane configuration.• Ball bearing construction, no lubrication required.• 30 minute duty cycle.• Pump may be padlocked.

APPLICATIONSSAFELY TRANSFERS DIESEL FUEL, GASOLINE, KEROSENE, MINERAL SPIRTS

FILL-RITE FUEL PUMP

MFG. NO.SD1202

PART NO.427-1202

QUALITY & MODERN:OUR PERSONAL COMMITMENT

Providing Customer Satisfaction, Competitive Prices, Quality Products

And Service You Can Rely Upon Since 1963.

Choose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and ship it to you thesame day.

Your Satisfaction is Guaranteed!



415

Fill-Rite Fuel Pump

Warranted for 1 year from purchase or 1-1/2 years from manufactureing.Call 1-800-766-7524 for details.

115V AC Utility Pumps - Series 700BThese rugged, positive displacement, economy pumps

are UL listed and deliver flow rates up to 18 GPM (69 l/ min.)

• Explosion-proof UL listed 1/3 HP motor (115V AC 60Hz) with sealed bearings

• Heavy-duty switch, thermal overload protection and junction box

• Carbon rotor vanes and ceramic/carbon seal reduce wear and repair expense

• Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift

• Easily removable strainer assembly• Automatic bypass valve• 12ft. (3.7 m) hose with static ground wire• Nozzle boot holds manual (standard) or automatic nozzle• "Easy-mount" 2 in. tank adapter• Pump may be padlocked


FILL-RITE FUEL PUMP

PART NO.427-700

MFG. NO.FR700


416


ITEM NO. 12

3456789

1011121314151617181920212223242526272829303132333435363738394045474849

OLD MFG. NO F2683F2697700-48

1200-46F2653

700B-30E700-103700-40KP1-530F2688F2654700-53F2655F2704F2680F2661F2679

1200-12300-27300-6

704-18F2756F2775

1200-11S800-114800-115700B-7F2667300-28F2652F2971700-28

600-109700-25304-62700-27700-26600-28

1200-21150-36700-24700-15

600-105700-34

702-23-6702-24

NEW MFG. NO. F2683F2697F3124F6625F2653F2706F2754F2687F4660F2688F2654F3131F2655F2704F2680F2661F2679F6455F7743F7714F3700F2756F2775F6464F4360F4380F2665F2667F7744F2652F2971F2960F2220F2920F7717F2950F2940F1950F6500F1440F2900F2800F2170F3020F3370F3390

DESCRIPTION Motor- 115V, 60Hz

Motor 220V, 50/60HzLine Switch (Incl. w/its. 1 & 2)

Switch Shaft Assy (Incl. w/its 1 & 2)Pump Housing (Incl. w/it. 1)Pump Housing (Incl. w/it. 2)

Fiber Seal SlingerSeal Assy

Seal WasherRetaining Ring (5100-62)

RotorRotor Key

Vane - BronzeVane - Carbon

Check Valve LabelCheck Valve Assy

Check Valve SubstituteO-Ring Gasket (-121)O-Ring Gasket (-236)

Rotor Cover8/8-16x1 HHCSBypass ValveBypass SpringBypass Cap

Strainer CoverO-Ring Gasket (-131)

Strainer - Standard MeshStrainer- Coarse MeshO-Ring Gasket (-224)

Inlet HousingPump Nameplate

#2 X 3/16 Drive Screw5/16-18x3/4 HHCSJunction Box Cover

5/16-18x2-1/4 HHCS5/16-18 Lock Nut

Switch Lever#14x5/8 Drive Screw

Locking Link1/4 Spring Washer

Nozzle Cover (Model 700 & 701)O-Ring Gasket (-218)

Tank AdapterOutlet Fitting (Model 700)

3/4x4-5/8 Nipple (Model 700)3/4 Elbow (Model 700)

QTY. 1

Opt.111

Opt.1111118

Opt.11

Opt.1114111111

Opt.111241211111111111

PARTS LISTING FOR 427-700FILL-RITE PUMP



417

Fill Rite Fuel Pump


FILL-RITE FUEL PUMP115V AC Utility Pumps - Series 600

These rugged, positive displacement, economy pumps areUL listed and deliver flow rates up to 14 GPM (53 l/ min.)

• Explosion-proof UL listed 1/4 HP motor (115V AC 60Hz) with permanent magnet

• Build-in check value, bypass value and thermal expansion value

• UL listed 12' hose and manual nozzle• 30 minute duty cycle• Ball bearing construction / no lubrication required• 12ft. (3.7 m) hose with static ground wire• Nozzle boot holds manual (standard) or automatic nozzle• "Easy-mount" 2 in. tank adapter• Pump may be padlocked

Warranted for 1 year from purchase or 1-1/2 years from manufactureing.Call 1-800-766-7524 for details.

MFG. NOFR610

PART NO.427-610


418


PARTS LISTING FOR 427-610 FILL-RITE PUMPITEM NO. CAT. NO. OLD PART NO. NEW PART NO. DESCRIPTION QTY.

1 1200F6423 F6423 PUMP HOUSING 1

2 427-1312 1200-30 F6545 BALL BEARING 2

3 600F7349 F7349 ARMATURE ASSY. 115V (INCL. IT. 2) 1

4 427-1252 1200-26A F6526 MOTOR FRAME AND MAGNET ASSY 1

5 1200-16 F6475 1/4-20 X 5 THRU BOLT 2

6 1200F6444A F7909 MOTOR CASTING

(INCL. ITEMS. 19, 20, 51, & 52)1

7 1200F6445A F7424SWITCH PLATE W/ BUSHING

(INCL. ITEMS. 23, 44, 45, & 46)1

8 600F7287 F7287 THERMAL PROTECTOR 115V 1

9 1200F7239 F7239 BRUSH HOLDER ASSEMBLY 2

10 600F7288 F7288 BRUSH ASSEMBLY 2

11 35F1396 F1396 #8-18 x 1/2 PHTS (TYPE B) 1

12 MOTOR NAMEPLATE 12V. 1

13 1200F4018 F4018 #8-32 x 3/8 PHMS (TYPE TT) 2

14 F3167 F3167 5/16 SPRING WASHER 1

15 F3149 F3149 SWITCH SHAFT ASSEMBLY 1

16 600F7295 F7295 HOT WIRE 2

17 1200F3170 F3170 LINE SWITCH 1

18 1200-20 F6495 JUNCTION BOX COVER 1

19 F8501 F8501 WIRE LEAD NEG./BLK (INCL. W/ITEM 6) 1

20 F8504 F8504 WIRE LEAD POS./WHT. (INCL W/ ITEM 6) 1

21 G1906 G1906 3/32 BLIND RIVET 2

22 1200F4015 F4015 NO. 10-32 X 3/4 PHMS (TYPE TT) 10

23 1200-51 F6650 5/32 X 1/2 PIN (INCL. W/ITEM 7) 1

24 427-1271 1200-14 F6465 BUNG ADAPTER 1

25 427-1294 100-11 F0760 SCREEN 1

26 427-1295 100-13 F0790 INLET GASKET 1

27 427-1278 1200-23 F6510 CHECK VALVE ASSEMBLY 1

28 427-1279 F2756 F2756 BYPASS VALVE 1

29 427-1311 1200-12 F6455 BYPASS GASKET (-121) 1

30 1200F2770 F2770 BYPASS SPRING 1

31 427-1327 1200-11S F6464 BYPASS CAP 1

32 427-1319 1200-66 F6721 1/2-20 X 3/4 HHCS 8

33 427-708 1200-102 F6431 VANE - CARBON 5


PARTS LISTING CONTINUED ON NEXT PAGE

ITEM NO. PART NO. OLD MFG. NO. DESCRIPTION QTY.NEW MFG. NO.


PARTS LISTING FOR 427-610 FILL-RITE PUMP



419

Parts Listing for 427-610 Fill-Rite Pump (Cont.)

PARTS LISTING FOR 427-610 FILL-RITE PUMP (CONT.)ITEM NO. CAT. NO. OLD PART NO. NEW PART NO. DESCRIPTION QTY.

34 427-709 F6437 F6437 ROTOR 1

35 427-1305 1200-9 F6440 ROTOR KEY 1

36 1200-8 F6435 ROTOR COVER 1

37 427-1265 1200-22 F6505 ROTOR COVER GASKET (-138) 1

38 427-1308 1200-10V F6446 SEAL ASSY 1

39 702-25 F3400 3/4 STREET EL 1

40 600-109 F2220 5/16 - 18 X 3/4 HHCS 2

41 F6688 F6688 NOZZLE COVER 1

42 F6674 F6674 SWITCH LEVER 1

43 700-27 F2950 5/16 X 18 LOCKNUT 1

44 600-28 F1950 NO. 14 X 5/8 DRIVE SCREW (TYPE U) (INCL. W/IT. 7) 1

45 F6686 F6686 LOCKING LINK (INCL. W/IT. 7) 1

46 150-36 F1440 1/4 SPRING WASHER (INCL. W/IT. 7) 1

47 PUMP NAMEPLATE 1

48 702-19 F3300 1/4 EXT. LOCKWASHER 2

49 F3162 F3162 5/16 RETAINER RING 1

50 600F7289 F7289 RECTIFIER 1

51 1200-91 F6726 GROUND WIRE - GRN. (INCL. W/IT. 6) 1

52 1500-33 F7342 #8-32 x 3/8 CROUND SCREW (TYPE F) (INCL W/IT. 6) 1

53 600F7324 F7324 SCREW, #6-32 x 1/2 1

54 F3351 F3351 3/4 X 1 3/4 NIPPLE 1

55 427-1330 1200-15 F6470 METER FITTING 1

56 427-1329 600-124 F2300 5/16" - 18 X 1 3/4 HHCS 2

57 427-1309 700-15 F2800 O-RING GASKET (-218) (INCL. W/IT. 58) 1

58 807C METER 1

59 702-23-5 F3365 3/4" X 4 NIPPLE 1

60 702-24 F3390 3/4" ELBOW 1

61 427-1299 700-57 F3136 3/4" NO-LEAD NOZZLE 1

62 427-1300 700-56 F3135 12' UL LISTED HOSE 1

63 800G1202 G1202 METER ASSY 1 OPT

427-1296 151-98S F1839 SUCTION PIPE 1

ALL PARTS ABOVE SHIPPED VIA UPS DIRECT FROM FACTORY

ITEM NO. PART NO. OLD MFG. NO. DESCRIPTION QTY.NEW MFG.NO.


PARTS LISTING FOR 427-610 FILL-RITE PUMP (CONT.)


420

FUEL & LUBRICATION PRODUCTSFill-Rite Fuel Pump



FILL-RITE FUEL PUMP

RUGGEDNESS OF CAST IRON &THE CONVIENIENCE OF AC POWER, THIS PUMPDELIVERS UP TO 13 GPM/ 49 LPM. THE SD602 ISDESIGNED FOR TANK OR BARREL MOUNTING.

FEATURES:• Thermally protected, UL/cUL listed, explosion-proof, 1/4 HP motor.• 2” NPT, no tank adapter needed.• 3/4” X 10’ hose, manual nozzle & 15’ power cable.• 1” polymer adjustable suction pipe.• Postive displacement, rotary vane configuration.• Ball bearing construction, no lubrication required.• 30 minute duty cycle.• Pump may be padlocked.

APPLICATIONSSAFELY TRANSFERS DIESEL FUEL, GASOLINE, KEROSENE, MINERAL SPIRTS

MFG. NO.SD602

PART NO.427-602

115 VOLT AC PUMPMODEL SD602



421

Fill-Rite Piston Hand PumpParts Breakdwon for 427-5207 Fill-Rite Hand Piston Pump

SEE BELOW AND NEXT PAGE FOR COMPLETE PARTS BREAKDOWN

MFG. NO.F-152

SEE NEXT PAGE FOR COMPLETE PARTS LISTING

THIS COMPACT, HIGH FLOW DUAL-ACTION DESIGN DELIVERS UP TO 20 GALLONS (76 L) PER 100STROKES. LIGHTWEIGHT AND PORTABLE, WITH A VARIETY OF OPTIONS, THESE PUMPS MEET A FULLRANGE OF APPLICATIONS. IDEAL FOR GASOLINE, OIL, OR A WIDE VARIETY OF APPROVED LIQUIDS.

• LIGHTWEIGHT CAST ALUMINUM

• STAINLESS STEEL INNER LINER

• REVERSIBLE PUMP FLOW

• "EASY MOUNT" 2 IN. TANK ADAPTER

• TELESCOPING SUCTION PIPE EXTENDS FROM 22" TO 40"

• ANTI-SIPHONING DEVICE

• PUMP MAY BE PADLOCKED

• 1" INLET

• 3/4" OUTLET PART NO.427-5207

SHIPPED COMPLETE WITH 8' HOSE AND NOZZLE


FILL-RITE PISTON HAND PUMP

PARTS BREAKDOWN FOR 427-5201 FILL-RITE HAND PISTON PUMP


422

FUEL & LUBRICATION PRODUCTSParts Listing for 427-5207 Fill-Rite Hand Piston Pump

PARTS LISTING FOR 427-5207FILL-RITE HAND PISTON PUMP

ITEM NO CAT. NO. OLD PART NO. NEW PART NO. DESCRIPTION QTY

1 150-2 F1210 BODY 1

2 150-32 F1420 BODY LINER 1

3 150-9 F1230 PISTON & SHAFT ASSY 1

4 150-12 F1260 PISTON RING 2

5 150-13 F1262 VALVE ASSY 4

6 150-16 F1280 SPRING HOLDER (INCL. W/IT. 5) 4

7 150-17 F1290 COVER GASKET 1

8 150-18 F1300 COVER 1

9 150-40 F1470 1/4-20 X 1/2 SCREW 8

10 150-19 F1310 PACKING (2 RINGS PER SET) 1

11 150-20 F1320 SCREEN 1

12 150-21 F1330 BEARING 1

13 150-22 F1340 LINK 2

14 150-23 F1350 CLEVIS PIN (LINK) 2

15 150-24 F1360 BEARING PLATE 1

16 150-41 F1480 #10-24 X 1 MACHINE SCREW 2

17 150-25 F1370 CLEVIS PIN (SHAFT) 1

18 150-26 F1376 HANDLE ASSY 1

19 150-39 F1460 LOCKING LINK 1

20 150-31 F1410 RIVET 1

21 150-36 F1440 TENSION WASHER 1

22 702-22 F3330 3/32 X 1/2 COTTERPIN 3

23 427-5254 151-7 F1593 BARREL BUNG 1

24 427-5256 151-12A F1619 DISCHARGE SPOUT ASSY 1 OPT.

25 151-109 F1869 VACUUM BREAKER 1

26 427-5258 151-114 F1790 NOZZLE 1

27 151-35 F1750 8' HOSE 1

28 151-113 F1752 8' HOSE UL LISTED 1 OPT.

29 151-98S F1839 SUCTION PIPE - TELESCOPING 1

5200S NAMEPLATE 1

ALL PARTS ABOVE SHIPPED DIRECT FROM FACTORY VIA U.P.S.

427-1257 151-84 SERIES 5200 REPAIR KIT INCLUDES THE FOLLOWING ITEMS :

4 150-12 F1260 PISTON RING 1

5 150-13 F1262 VALVE ASSY 1

7 150-17 F1290 COVER GASKET 1

10 150-19 F1310 PACKING (2 RINGS PER SET) 2

11 150-20 F1320 SCREEN 4

12 150-21 F1330 BEARING 4

25 427-5257 151-109 F1869 VACUUM BREAKER 1

ITEM NO. PART NO. OLD MFG. NO. DESCRIPTION QTY.NEW MFG. NO.



423

Fill-Rite Gravity Flow Fuel MeterParts Breakdown for 427-1108 Meter

PARTS BREAKDOWN FOR 427-1108 METER

Warranty: 1 year from purchase or 1-1/2 years from manufacturing.Call 1-800-766-7524 for details.FEATURES

• 5-20 GPM FLOW RATE• ACCURATE TO WITHIN +/- 1%• 3/4" NPT PORTS• LARGE, EASY TO READ NUMBERS• QUICK RESET KNOB• MASTER TOTALIZER OF 100,000 GALLONS• 100 GALLON REGISTER

PART NO.

427-1108

MFG. NO.

807C

FILL-RITE GRAVITY FLOW FUEL METER

PARTS BREAKDOWN FOR 427-1108 METER

SEE NEXT PAGE FOR COMPLETE PARTS LISTING


424

FUEL & LUBRICATION PRODUCTSParts Listing for 427-1108 Fill-Rite Meter

ITEM NO. CAT. NO. PART NO. DESCRIPTION NO. REQ'D1 800-88 COUNTER COVER 1

2 800-100A COUNTER FACE 1

3 800-105A KNOB ASSY. 1

4427-1307 800-85A COUNTER - U.S. GALLON 1

800-85AL COUNTER - LITER AS REQ'D

5

800-87A METER COVER 1

800-87AT METER COVER - TEFLON COATED AS REQ'D

800-87AN METER COVER - NICKEL PLATED AS REQ'D

6 800-97V O-RING (5/106)VITON 1

7 800-55 WASHER 2

8800-160A DRIVE GEAR (70T) - U.S. GALLON 1

800-162A DRIVE GEAR (84T) - LITER AS REQ'D

9 800-16 SHAFT - CLUSTER GEAR 1

10800-159 CLUSTER GEAR (22T/67T) - U.S. GALLON 1

800-161 CLUSTER GEAR (10T/76T) LITER AS REQ'D

11 800-18 WASHER 1

12 800-171 GEAR FRAME 1

13 800-60 #8-32 X 5/16 PHMS 9

14 600-124 5/16-18 X 1 3/4 HHCS 2

15

800-120 INLET FITTING 1" 1

800-120T INLET FITTING 1" - TEFLON COATED AS REQ'D

800-120N INLET FITTING 1" - NICKEL PLATED AS REQ'D

16 800-110 51/6-18 X 7/8 SHCS 2

17

427-1306 800-109 METER FITTING - 3/4" 1

800-109T METER FITTING - 3/4" - TEFLON COATED AS REQ'D

800-109N METER FITTING - 3/4" - NICKEL PLATED AS REQ'D

18427-1309 700-15 O-RING (-218) 1

700-15V O-RING (-218) - VITON AS REQ'D

19

800-86 METER HOUSING - 3/4" 1

800-86 1" METER HOUSING AS REQ'D

800-86T METER HOUSING - 3/4" - TEFLON COATED AS REQ'D

800-86T 1" METER HOUSING - TEFLON COATED AS REQ'D

800-86N METER HOUSING - 3/4" - NICKEL PLATED AS REQ'D

800-86N 1" METER HOUSING - NICKEL PLATED AS REQ'D

20 700-16 5/16-18 X 7/8 HHCS 4

21 800-146A CALIBRATION SCREW (INCL. ITEM 24) 1

22 800-125V O-RING (-012) - VITON 1

23 800-124 SEAL SCREW 1

24 800-68V O-RING (-008) - VITON 1

25800-65 O-RING (-156) 1

800-65V O-RING (-156) - VITON AS REQ'D

26800-175 METER CHAMBER ASSY. 1

800-158A PINION PLATE ASSY. (INCL. W/ITEM 26) 1

27 800-169 CLAMP 2

28 800-172 PINION BEVEL 1

29 800-66 #4-40 X 1/4 PHMS 2


ITEM NO. PART NO. MFG. NO. DESCRIPTION NO. REQ'D


PARTS LISTING FOR 427-1108 FILL-RITE METER



425

Fill-Rite Fuel Pump

ROTARY VANE HAND PUMPMODEL SD62

This easy to use hand-operated rotary vane pump delivers approximately 6 gallons / 23 liters per100 revolutions - dependably and quickly.

FEATURES:• 2” NPT threaded bung adapter.• Gooseneck discharge spout.• Lightweight die-cast aluminum body.• 1” polymer suction pipe adjusts for 15 to 55 gallon drums.• Smooth, easy action.

APPLICATIONSSMOOTHLY PUMPS MEDIUM-VISCOSITY OILS, GASOLINE, DIESEL FUEL AND NON-CORROSIVE FLUIDS.



MFG. NO.SD62

PART NO.427-62

FILL-RITE FUEL PUMP


426

FUEL & LUBRICATION PRODUCTSMonarch Rotary Fuel PumpsMonarch Rotary Fuel Pump Accessories

DESCRIPTIONFITS 15 THROUGH 55 GALLON DRUMS WITH 2 INCH BUNG OPENING. A ROTARYVANE TYPE PUMP FOR DISPENSING GASOLINE, DIESEL FUEL AND SIMILARLIGHT PETROLEUM PRODUCTS. DISCHARGE SPOUT THREADED 3/4" NPT.COMES WITH TELESCOPING TUBE ASSEMBLY (UP TO 40 INCHES). DISPENSESAPPROXIMATELY1 GALLON PER 10 REVOLUTIONS. PUMP FEATURES CAST GREY IRON, OFF-SET,PRECISION MACHINED ROTOR WITH SEPARATE PUMP SHAFT, EASILY SER-VICED. PLATED SPRINGS FOR CORROSION RESISTANCE. BRASS SLIDINGVANES, SELF ADJUSTING FOR WEAR. CASING IS CAST GREY IRON WITHCOVER FOR EASY RE-ASSEMBLY AFTER SERVICING. PUMP HAS TELESCOPINGSUCTION PIPE TO FIT VARIOUS DRUM SIZES. SHIPPING WT. 20 lbs.

SEE NEXT PAGE FOR PARTS BREAKDOWN

1 Year Warranty from Date of Purchase.

PART NO.426-2000

MONARCH ROTARY FUEL PUMPS

3/4" I.D. RUBBER HOSE ASSEMBLY COUPLEDON ONE END WITH

DISCHARGE NOZZLE. 8 FEET LONG. FORUSE WITH CAT. NO. 426-2000 ROTARY HAND

PUMP.

PART NO.308-1729

MONARCH FUEL PUMP ACCESSORIES

QUALITY & MODERN:OUR PERSONAL COMMITMENT

Providing Customer Satisfaction, Competitive Prices, Quality Products

And Service You Can Rely Upon Since 1963.

Choose from the hundreds of items in this catalog or go on line atwww.modernusa.com. Place your order from our huge warehousefacility, and our professional staff will process and ship it to you thesame day.

Your Satisfaction is Guaranteed!



427

Parts Breakdown for 426-2000 Rotary Fuel Pump

PARTS BREAKDOWN FOR 426-2000 ROTARY FUEL PUMP

REF. CODE # CAT. NO. DESCRIPTION1 466471 CASING

3 466472 FRONT COVER

4 410200 ROTOR

6 410210 *426-2001 VANE

7A 431720 426-2007 HANDLE ASSEMBLY

9 410080 *426-2005 PACKING NUT

10 465760 PUMP SHAFT

12A 435501 SPOUT ASSEMBLY

13A 43550 426-2004 BARREL NUT ASSEMBLY

15 163270 THUMB SCREW, 1/4 UNC X 3/4

16 199710 SPRING, CADNIUM PLATED

17 137610 TAPER PIN #3 3/4 LONG

18 119760 HEX. HD BOLT, 5/16 UNC X 3/4

19 158180 SQ. BOLT, 5/16 UNC X 3/4

22A 435502 SUCTION PIPE ASSEMBLY (INCLUDES O-RING)

22A-1 198561 O-RING, GRAPHITE IMPREGNATED

23 432250 TWISTED PACKING #814, 1/4 DIA. 21 LONG

N/S 600171 426-2006 HOSE 8 (V110H ONLY)

N/S 497144 426-2002 REPAIR KIT

* = SHIPPED VIA UPS DIRECT FROM FACTORY

REF. CODE #

PART NO. DESCRIPTION


428

FUEL & LUBRICATION PRODUCTSGrease PumpGun Filler Pump Pump for Gear Oil, Lever Type Barrel Pump

MODEL 567 (NEW "PUSH" MODEL) HANDAND SPRING OPERATED PUMP FOR FULL OPEN

HEAD PAILS UP TO 6 1/2 GALLON SIZE. INCLUDES PUMP, COVER, FOLLOWER PLATE, ANDLOW PRESSURE HOSE ASSEMBLY WITH BOOSTERCONTROL VALVE. WILL DEVELOP OVER 5000 P.S.I.OF GREASING PRESSURE. RECOMMENDED FOR

USE WITH LIGHT GREASES WHICH TEND TO SEEK THEIR OWN

LEVEL. SHIPPING WT. 12 LBS.

PART NO. MFG NO.422-13 567

FITS FULL OPEN HEAD PAILS THROUGH 6 1/2 GAL-LON SIZE. INCLUDES PUMP, PAIL COVER, FOLLOW-ER PLATE WITH GASKET AND ONE NIPPLE. SHIP-

PING WT. 8 LBS.

PART NO. MFG. NO.422-450 328

National-Spencer WarrantyWarranty 1 year from purchase or 1-1/2 years from manufacturing on all

National-Spencer Products. Call 1-800-231-1525 for details.

GUN FILLER PUMPGREASE PUMP

FITS FULL OPEN HEAD PAILS THROUGH 6 1/2 GAL-LONS. INCLUDES PUMP, PAIL COVER, AND 4 FEETOF CLEAR VINYL HOSE WITH CURVED DISCHARGE

NOZZLE.SHIPPING WT. 8 LBS.

PART NO. MFG. NO.422-322 321

FITS 15 THROUGH 55 GALLON DRUMS WITH 2 INCHBUNG OPENING. PUMP HAS STEEL PISTON WITH

TWO BRASS PISTON RINGS. CURVED DISCHARGESPOUT HAS GARDEN HOSE THREADS. INCLUDESSTEEL TELESCOPING TUBE ASSEMBLY WITH NEO-PRENE SEALS. DISPENSES APPROXIMATELY ONE

PINT PER STROKE. SHIPPING WT. 7 LBS.

PART NO. MFG. NO.422-300 DS00001

PUMP FOR GEAR OIL LEVER TYPE BARREL



429

Fuel Transfer HosesUtility Hose Nozzles

Fuel Hoses, Catlow Pump Nozzles, 3D Hose Swivels

3D HOSE SWIVELS

Catlow 3D Swivels give you the lightest, most reliable performanceon the market. Combine the user friendly features with their high vol-ume flow-through, and it's easy to see why many petroleum usershave found Catlow swivels to be the best in the business.

FUEL HOSES

• Moves freely and easily in any plane of space.• No flow pinch points or sharp turns.• Durable nylon bearing eliminates metal on metal friction for longer life and user friendly performance.• Provides the lowest flow restriction of any other swivel of comparable size.• UL listed.• Spout is easily replaced on location.

CATLOW PUMP NOZZLES

BUILT-IN STATIC WIRE HOSES

UL - Underwriters Listed

A premium hose for dispensing gasoline,kerosene or fuel oils by gravity feed, handpumps, or electric farm or barrel pumps.

Cover: Black abrasion, oil and weather-resistant nitrile blend.

Carcass: Synthetic spiral cord with static wire.Tube: Gasoline resistant nitrile.

UTILITY HOSE NOZZLES ALUMINUM

FUEL TRANSFER HOSES

PART NO.

308-1720308-1721308-1722308-1731

SIZE

3/4"3/4"3/4"1"

LENGTH

8'10'12'10'

THREADSIZE3/4"3/4"3/4"1"

GRAVITY FEED ONLY HOSES

FOR GRAVITY FLOW OR ELECTRIC PUMPS.1" THREADED INLET DIAMETER.

PART NO.426-3003426-3041

MFG.NO.

15371538

TUBE O.D.15/16"13/16"

STYLE

LEADEDUNLEADED

SIZE

3/4"1"

LENGTH

12'12'

THREADSIZE3/4"1"

PART NO.

308-1700308-1701

PART NO.309-1241309-1242309-1243309-1244

DescriptionFuel Hose 3/16"Fuel Hose 1/4"Fuel Hose 5/16"Fuel Hose 3/8"

25' Reels

• 1" inlet.• BSPT-BSPP threads available upon request.• Automatic shut-off spillage.• UL listed.• Spout is easily replaced on location- simply remove the spout screws.• Full hand insulator protects nozzle, vehicle, while insulating user's hand.

BIG MAC DIESEL NOZZLEFor Leaded and Diesel Fuel

Catlow's Big Mac Diesel Nozzle is an excellent choice for heavy dutytruck, bus and fleet dispensing services. This full flow, 50+ gpm dieselnozzle is designed truckstop tough, to eliminate annoying field failuresand expensive down-time. Plus, the Big Mac Diesel Nozzle is completelyrebuildable. Not for gravity flow use.

MFG. NO.CNM1

PART NO.426-4004

SECUR-FLO AUTOMATICFARM NOZZLE

For Leaded and Diesel Fuel

• 1" inlet.• Completely rebuildable.• Automatic shut-off.• UL listed.• Spout is easily replaced on location.• Not for gravity flow use.

PART NO.426-4008

MFG. NO.N1ALF

DIMENSIONS1" M X 3/4"F1" M X 1"F

PART NO.426-4020426-4021


430

FUEL & LUBRICATION PRODUCTSFuel FiltersSpin-On Fuel FilterSpin-On Filters

• Filters Microscopic Particles (10 Microns) Of Rust, Sand, Dirt, Scale And Lint At A 5 Gpm Gravity Flow With 24" Head.

• 150 Psi Working Pressure, Using Standard Fittings.• Fitted With An Alcohol-Resistant Plastic

See-Thru Bowl.• Uses Efficient, Low Cost Filter Elements With

366 Square Inch Filtering Surface.• Simple Sediment, Weather Resistant.• Filters Gasohol, Regular, Unleaded And Diesel

Fuels.• Die Cast Zinc Top Cap.• 9 1/4" X 4" Diameter. Six Per Carton Wt. 2 1/2 Lbs.• 1" Female Pipe Threads

PART NO.422-495

MFG NO.495

Fuel Filter Bowl For No. 495 Fuel Filter. Sixper Carton. Wt. 3 1/2 lbs.

PART NO.422-494

MFG NO.495-4

PART NO.422-475

MFG NO.470-5

Fuel Filter Element. Standard 10 MicronReplacement. 12 Per Carton. Wt. 3 Lbs.

PART NO.422-496

MFG NO.496-5

Removes water from gasoline and diesel fuel. Waterabsorbing polymers trap water and restrict fuel flow, which isyour signal to replace the element.

PART NO. MFG. NO.422-486 491 .

Fits 495-4 Filter BowlPerfectly For Easy RemovalWithout Cracking.

For use with gasoline, gasohol, diesel fuel, andother fuels. Filters microscopic particulars (10 microns ) of rust,sand, dirt, scale, and lint. 510 square inches offiltering surface. Working pressure up to 50psi. Maximum recommended flow rate of 12gpm. Ideal for farm, construction, industrial,and service station use

SPIN-ON FILTERS

FUEL FILTERS“SEE THRU”

FUEL FILTER WRENCH

SPIN-ON FUEL FILTER

40-Mesh Stainless Steel Strainer. 2-1/2" Diameter. 12 Per Carton. Wt. 3 Lbs.

PART NO. MFG. NO.422-4715 470-15 .

Fuel Filter Housing Gasket

PART NO. MFG. NO.422-477 470-7 .

REPLACEMENT CANISTER

1" FNPT

PART NO.422-499

MFG. NO.595

PART NO.422-497

MFG. NO.595-5

REPLACEMENT TOP CAP

1" FNPT

PART NO.422-498

MFG. NO.570-3

200E-10 3/4" Flow Spin-on Filterwith Draincock - 1"-12 UNF

200AE-10 1" Flow Spin-on Filterwith Draincock - 1 3/8"-12 UNF

MFG. NO.7000270004

PART NO.422-510422-511

SIZE3/4"1"

Particulate Resin-Impregnated Cellulose10 Micron Nominal Filtration18 gpm/67 lpm Maximum Flow50 PSI 3.4 BAR Maximum Pressure



431

Grease Guns-Pistol GripProfessional Lever Action

Lever Action, Economy

PART NO.422-4572

PART NO.W54204

• “Pistol grip” action for easy use• Air bleeder valve eliminates air lock• Uses standard 14 oz. grease cartridges

GREASE GUNS

PART NO.422-1082

MFG.NO.W54202

Professional quality gun for the demanding user.Allows easy one-hand operation in confined areas.• Short stroke “lever action” for easy use in tight spaces

• Air bleeder valve eliminates air lock• Comfortable handle grip• Uses standard 14 oz. grease cartridges

Professional quality gun for the demanding user.

PART NO.422-1083

MFG. NOW54201

• Uses standard 14 oz. grease cartridges

A rugged medium duty gun, perfect for general use.

PART NO.422-1084

PART NO.W54203

• Black mat painted finish• Knurled barrel for secure grip• Short stroke “lever action” for easy use in tight spaces• Uses standard 14 oz. grease cartridges

An economical solu-tion for light dutyapplications.

PISTOL GRIPPROFESSIONALLEVER ACTION

LEVER ACTION ECONOMY

More Grease Guns &Accessories on Next Page.

NEW!MINI GREASE GUN Allows easy one-hand operation for especially confined areas.• Pistol grip action for easy one-hand operation• Uses 3 oz. Grease cartridges• Clamshell packaged

PART NO.422-4573

MFG.NO.W54200


432

FUEL & LUBRICATION PRODUCTSGrease Guns & Accessories-Pistol GripAir Powered, Grease Gun PipeGun Filler Fitting, Grease Coupler, Grease Injectors, Grease Gun Holder, Heavy Duty Flexhoses

A STRIKINGLY DIFFERENT GREASE GUNREQUIRING ONLY ONE-HAND OPERATION. HIGH-QUALITY FINISHTO PREVENT RUST AND CORROSION.THREE-WAY LOADING; CARTRIDGE, BULK,LOADER NIPPLE. GUN TAKES ALL 14 OZ.AND 14 1/2 OZ. CARTRIDGES. COUPLERHAS BALL CHECK TO PRE VENT LEAKAGEAND LOSS OF PRES SURE. 422-4570COMES WITH METAL TUBE AND 422-4571COMES WITH 12" HOSE.

422-4570

422-4571

MFG. NO.1114511143

PART NO.422-4570422-4571

LM NO.LM 145LM 143

GREASE GUNS & ACCESSORIES

• Pistol grip• Great for automotive, workshop & marine applications.

MFG. NO.M582DB

PART NO.422-911

PLATED FOR MAXIMUM RUST AND CORROSION RESISTANCE. PROVIDESHEAVY-DUTY PERFORMANCE FOR PROFESSIONAL USE. INDUSTRIAL, AGRICU-TURAL, AUTOMOTIVE. ATTRACTIVELY PACKAGED.

PART NO.422-1080422-1081

MFG. NO.1115511150

FINISH/COLORZINC PLATED

BLACK

LM NO.LM 155LM 150

LOADER NIPPLELOADER NIPPLE W/ 1/8" THREADS

FITS ON GREASE GUN

MODEL NO. 401 GREASE INJECTOR ATTACHES DIRECTLY TO YOUR GREASE GUN. IDEAL FOR BEARINGS THAT ARE EASILY ACCESSABLE.

HEAVY DUTY FLEXHOSES

PISTOL GRIP

LEVER ACTION

AIR POWERED

GUN FILLER FITTINGGREASE GUN PIPE

5 1/2" LONG X 1/8" MPT BOTH ENDS,ZINC PLATED.

MFG NO.55

PART NO.423-59

HYDRAULIC, SNAP-ON COUPLER, W/BALL CHECK. 1/8" NPT (FEMALE)

GREASE COUPLER

MFG NO.28

PART NO. 423-60

GREASE GUNHOLDERCLAMP STYLE GREASE

GUN HOLDERMFG NO.

149PART NO.

422-18

GREASE INJECTORS

MFG. NO.80

PART NO.423-90

MFG. NO.131409

PART NO.422-401

MODEL NO. 400 GREASE HARD TO REACHSPOTS - FITS HAND GREASE GUNS. FLEXI-BLE 12" HOSE WITHSTANDS 1000 lbsPRESSURE.

PART NO.422-400

MFG. NO.131607

PART NO.422-580422-582422-584

LENGTH12"18"24"

Constructed of 3/16" - 1 wire hydraulic hose, 10,000 lbs. burst pressure; 1/8" maleends with hex for easy installation. Fits all standard hand grease guns.



433

Grease Fittings

PART NO.

423-1073

423-1074

423-1080

423-1075

423-1081

PART NO.

423-1070

423-1078

423-1071

423-1079

423-1072

423-1076

PART NO.

423-1062

423-1063

PART NO.

423-1069

423-1068

423-1065

423-1067

MODEL NO.

B-610X

B-611X

B-688X

B-612X

B-613X

B-669X

DESCRIPTION

PIPE THREAD WITH BALL CHECK

30 DEG ANGLE WITH BALL CHECK


67 1/2 DEG ANGLE WITH BALL CHECK


STRAIGHT WITH BALL CHECK

MODEL NO.

B-641X

B-637X

B-636X

B-911X

B-914X

DESCRIPTION

TAPER SHORT WITH BALL CHECK

TAPER 45 DEG ANGLE SHORT, WITH BALL CHECK

TAPER 45 DEG ANGLE LONG, WITH BALL CHECK

TAPER 90 DEG ANGLE SHORT, WITH BALL CHECK

TAPER 90 DEG ANGLE LONG, WITH BALL CHECK

MODEL NO.

B-608X

819620

37607

1743

DESCRIPTION

5/16" DRIVE WITH BALL CHECK

3/16" DRIVE STRAIGHT, WITH BALL CHECK

3/16" DRIVE, 45 DEG ANGLE WITH BALL CHECK

1/4" DRIVE WITH BALL CHECK

MODEL NO.

B-627X

B-629X

DESCRIPTION


67 1/2 DEG ANGLE, WITH BALL CHECK

GREASE FITTINGSGREASE FITTINGS 1/8" PIPE THREAD

GREASE FITTINGS 1/4" - 28 TAPER THREAD

GREASE FITTINGS 1/4" PIPE THREAD

DRIVE IN TYPE GREASE FITTINGS

ALL GREASE FITTINGS PACKAGED 10 PER BAG

PART NO.

423-1064

MODEL NO.

B-711X

DESCRIPTION

5/16" - 24 THREAD WITH BALL CHECK

GREASE FITTINGS 5/16" PIPE THREADS


434

FUEL & LUBRICATION PRODUCTSMetric Grease Fittings

PART NO.

423-1131

423-1132

423-1133

PART NO.

423-1121

423-1122

423-1123

PART NO.

423-1141

MODEL NO.

819710

819711

819712

DESCRIPTION




MODEL NO.

819713

819714

819715

DESCRIPTION




MODEL NO.

819716

DESCRIPTION


METRIC GREASE FITTINGSGREASE FITTINGS - 6MM

GREASE FITTINGS - 8MM

GREASE FITTINGS - 10MM

ALL GREASE FITTINGS PACKAGED 10 PER BAG



435

Grease Fitting AssortmentsDrive-In Tool

30 Piece Metric Grease Fitting Assortment

SET CONTAINS :QTY. DESCRIPTION

25 1/8"PIPE STRAIGHT10 1/8"PIPE 45 DEGREE10 1/8"PIPE 67 1/2 DEG.15 1/4-28 TAPER SHORT10 1/4-28 45 DEG. SHORT10 1/4-28 90 DEG.SHORT

CAT. NO. MFG. NO.423-160 66

QTY. DESCRIPTION

144 PIECE

80 PIECESTANDARD

PART NO.423-221

SET CONTAINS AN ASSORTMENT OF THE MOSTPOPULAR METRIC GREASE FITTINGS

QTY.3113112

DESCRIPTION1/8" PIPE STRAIGHT

1/8" PIPE 45 DEGREE1/8" PIPE 90 DEGREE1/4-28 SHORT TAPER1/4-28 45 DEG TAPER1/4-28 90 DEG TAPER

5/16" DRIVE-IN

EACH TUBE CONTAINS: (STANDARD)

12 OF THE MOSTPOPULAR AGRICULTURALSTANDARD OR METRIC ZERKFITTINGS PACKAGED IN A PLASTICTUBE.

MERCHANDISER CONTAINS12 ASSORTMENTS INCOUNTER DISPLAY.

PART NO.

GREASE FITTING ASSORTMENTS

DRIVE-IN TOOL

30 PIECE METRIC GREASE FITTING ASSORTMENT

DRIVE-IN TOOLFOR STRAIGHT FITTINGSLENGTH 4 1/2", DIA. 11/16"

PART NO.423-57

MFG. NO.37415

DRIVE-IN TOOLFOR ANGLE FITTINGSLENGTH 4 1/2", DIA. 11/16"

PART NO.423-58

MFG. NO.37416

EACH TUBE CONTAINS: (METRIC)QTY.

222111111

DESCRIPTION6MM STRAIGHT8MM STRAIGHT

10MM STRAIGHT6MM 45 DEGREE8MM 45 DEGREE

10MM 45 DEGREE6MM 90 DEGREE8MM 90 DEGREE

10MM 90 DEGREE

PART NO.423-144423-145

TYPESTANDARD

METRIC

SET CONTAINS :

QTY. DESC. QTY. DESC.

6 6 MM STRAIGHT 3 8 MM 90 DEG

3 6 MM 45 DEG 2 10 MM STRAIGHT

3 6 MM 90 DEG 2 10 MM 45 DEG

6 8 MM STRAIGHT 2 10 MM 90 DEG

3 8 MM 45 DEG

QTY. DESC. QTY. DESC.


436

FUEL & LUBRICATION PRODUCTSFuel Tank CapsPoly Gas CansFunnels

PRESSURE VACUUM VAPOR CONTROL, CAP REDUCES EVAPORATION LOSSAND WATER CONDENSATION.

• USE AS A FILL CAP• CONVENIENT TO LOCK• FITS 2" NPT BUNG

• SLEEKER, LOWER PROFILE DESIGN.• USER FRIENDLY.• TOUGH, DURABLE AND RESISTANT.• A LEATHER-LIKE FINISH MAKES CAN LESS SLIPPERY.• FULLY APPROVED BY CSA AND UL.• PATENTED, EXCLUSIVE VERSAFLEX POURING SPOUT.• VISIBLE FUEL SIGHT LINE ON 1.25 & 2.5 SIZES.

FUEL TANK CAPS

POLY GAS CANS

18" FLEXIBLE FUNNEL 18" TRANSMISSION FUNNEL

PART NO.422-23422-24

MFG. NO.50

50C

DESCRIPTIONComplete Pre-Vent Cap

Replacement Cap

PART NO.429-1101429-1102429-1105

SIZE1.25 Gal.2.5 Gal.5 Gal.

• ALL WHITE PLASTIC FUNNEL.• WITHSTANDS CHEMICALS AND

TEMPERATURE EXTREMES.• 12 PER CARTON. WT. 1 LB.

PART NO.420-810

• TWO-PIECE WITH SNAP-ON EXTENSION FOR RADIATOR,TRANSMISSION, AND GASO-LINE (EMERGENCY USE ONLY)

• 6 PER CARTON. WT.,1 LB.,9 OZ.

PART NO.420-811

MFG. NO.90-809

PART NO.420-809

SUPER FUNNEL

PART NO.420-803420-804420-805

MFG. NO.4F6F8F

SIZE1/2 Pint1 Pint

2 Quart

PLASTIC FUNNELS



437

Galvanized Funnels-Flexible Spout, Lock OnOffset, Transmission

Pump Oiler, Piston Pump Oiler, Junior Oiler

LOCK-ON

• 8-QUART FUNNEL.• HOT-DIP GALVANIZED.• 10 1/4" DIAMETER X 12 3/4"

HIGH X 1 1/4" SPOUT (WITH REMOVABLE BRASS SCREEN).

• 6 PER CARTON. WT.,12 LBS.

* 8-QUART MULTI-FIT,LOCK-ON TRACTOR FUNNEL.

* HOT-DIP GALVANIZED.* 10 1/4" DIAMETER X 10 1/2"

HIGH X 1 7/8" SPOUT (WITHREMOVABLE BRASS SCREEN).

* 6 PER CARTON. WT., 13 LBS.

• 5-QUART SPECIAL DUTYFUNNEL WITH OFFSET SPOUT

• HOT-DIP GALVANIZED.• 8 3/4" DIAMETER X 14 1/4"

HIGH X 1 1/4" SPOUT(WITH REMOVABLE BRASS SCREEN).

• 6 PER CARTON.

JUNIOR OILER

* DELUXE TRANSMISSION FUNNEL.* ONE PINT.* FLEXIBLE TUBING, HEAVY GAUGE,

WON'T CRIMP.* 12 PER CARTON.

PISTON PUMP OILER

GALVANIZED FUNNELSFLEXIBLE SPOUT

PART NO.420-707

MFG. NO.223

DESCRIPTIONFunnel

with 24" SpoutPART NO.420-123420-1420-2

MFG. NO.TF1235015551155

DESCRIPTIONFunnel Screen

Locking RingOFFSET

PUMP OILER HEAVY DUTY

• BUILT OF HEAVY GAUGE STEEL THAT WILLSTAND UP TO ROUGH USE.

• DELIVERS EITHER A DROP OR STREAM OFFLUID.

• EASY-TO-USE FILLER CAP ELIMINATESHANDLING OF MESSY PUMPS.

• REPLACEABLE BRASS SPOUT TIP.• WROUGHT IRON SPOUT.• COPPER BRONZE FINISH.

SPECIFICATIONS: 24 OZ. CAPACITY; 15" FLEXIBLE SPOUT; 6 PER CARTON

PART NO.422-220422-122

MFG. NO.120B3120-12

DESCRIPTIONPump Oiler

12" Flex Spout

MFG. NO.707

PART NO.422-707

• DRAWN STEEL CONTAINER WITH A DOUBLE SEAMED BASE

• ZINC DIE CAST HIGH PRESSURE PUMPWITH A RUGGEDLY CONSTRUCTEDPRECISION GROUND PISTON.

• SPOUT IS REMOVABLE FOR QUICK REPLACEMENT OR CONVERSION.

• ALL SPOUTS IN THIS SERIES ARE INTERCHANGEABLE.

• COPPER BRONZE FINISH SPECIFICATIONS: 12 OZ. CAPACITY; 8" FLEXIBLE SPOUT; 6 PER CARTON.

TRANSMISSION

MFG. NO.21

PART NO.420-86

• ALL STEEL BODY WITH DOUBLE SEAMED BASE

• FLARED BASE FOR ADDED STABILITY• ZINC DIE CAST HIGH PRESSURE PUMP WITH

RUGGEDLY CONSTRUCTED PRECISION GROUND PISTON

• HIGH VOLUME OF FLUID DELIVERED WITH EACH STROKE

• OLIER STAYS PRIMED FOR INSTANT USE• COPPER BRONZE FINISH SPECIFICATIONS: 6 OZ.

CAPACITY; 6" FLEXIBLE SPOUT; 6 PER CARTON

MFG. NO.606

PART NO.422-606

MFG. NO.159

PART NO.420-705


438

FUEL & LUBRICATION PRODUCTSGlass Cleaner, Liquid WrenchChain Lube, Quick GelLock Nuts Threadlocker, After Lock Penetrating Threadlocker

THE MULTI-PURPOSE SPRAYWITH AMMONIA, CLEANSWINDSHIELDS AND ALLGLASS WINDOWS.GC-1 19 OZ.12 PER CASE

A "STAY-PUT" INSTANT ADHESIVE, QUICK GEL WON'TSOAK INTO POROUS SURFACES

3GM

INDUSTRIAL PRODUCTION AND MAINTENANCEAPPLICATIONS HAVE BEEN GREATLY EXPANDED WITH

THE INTRODUCTION OF QUICK GEL INSTANT ADHE-SIVE. THIS NEW MATERIAL WON'T RUN, STRING ORSOAK INTO POROUS SURFACES. BONDS A WIDER

RANGE OF SUBSTRATES THAN TRADITIONAL INSTANTADHESIVES: LEATHER, CORK, FOAM, EPOXY, GLASS,WOOD AND MORE INCLUDING PLASTIC, RUBBER AND

METAL. MFG. NO.: 81777

LIQUID WRENCH NO. 1,12 OZ. SIZEA POWERFUL BLEND OFQUICK-ACTING, FAST-PENETRATING SOLVENTSTHAT LOOSENS RUSTEDNUTS, BOLTS, AND PARTS IN SECONDS.

6 PER CASE

LIQUID WRENCHGLASS CLEANER

PART NO.803-701

MFG. NO.GC-1

PART NO.803-703

MFG. NO.LI-12

QUICK GELINSTANT ADHESIVE

CHAIN LUBE

ML-2

PENETRATES, LUBRI-CATES, CLINGS, QUIETSALL TYPES OF OPENCHAINS AND FLEXIBLECABLES. ANTI-WEARAND ANTI-OXIDATIONAGENTS PROLONGCHAIN AND SPROCKETLIFE. SPECIAL ADDI-TIVES PROVIDE EXTRACLING TO REDUCESLING-OFF.

L7-16

CONTAINS MOLYBDE-NUM DISULFIDE.WITHSTANDS HIGHTEMPERATURES ANDADHERES TO SUR-FACES UNDER HIGHRPM'S. SPRAYS ONAND PENETRATESLIKE AN OIL. SETS UPLIKE A GREASE

PART NO.803-8777

SIZE.34 Fl. Oz.

CONTAINERTube

PACKAGED12 per ctn.

PART NO.803-707803-709

PACKAGED12 per Case12 per Case

DESCRIPTION15 Oz. Aerosol12 Oz. Aerosol

MFG NO.L7-16ML-2

LOCKNUTS THREADLOCKERLOCK AND SEAL THREADED FASTENERS WITHOUT DISASSEMBLYNO NEED TO DISASSEMBLE PARTS. AFTER LOCK IS BOTH A PENETRATING THREAD-LOCKER AND SEALANT. ONE DROP APPLIED TO PREASSEMBLED FASTENERS WILLLOCK AND SEAL TO ELIMINATE VIBRATION LOOSENING AND CORROSION. BRUSHAPPLIED TO WELDS AND OTHER POROUS METAL PARTS WILL SEAL POROSITIES.

PART NO.803-8788803-8791

SIZE.34 Fl. Oz..34 Fl. Oz.

MFG NO.8178881791

DESCRIPTIONRemovable Lock Nuts

Locks Studs Permanent

PACKAGED10 pcs. per ctn.10 pcs. per ctn.

PRO LOCK

AFTER LOCK PENETRATING THREADLOCKERIMPROVES RELIABILITY. SAVES TIME AND CUTS COSTS. ALLOWS EASY DISASSEMBLY.LOCKS AND SEALS NUTS, BOLTS, SCREWS, FITTINGS AND OTHER THREADED FASTENERS.

PREVENTS VIBRATION LOOSENING AND THREAD CORROSION. HELPS CUT COSTS BY ELIMI-NATING NEED FOR SPECIAL LOCKING FASTENERS. SEALS AGAINST AIR, OIL, FUEL ANDHYDRAULIC LEAKS. REQUIRES NO PRIMER. APPLIES EASILY. REMOVABLE WITH NORMALHAND TOOLS.

PART NO.803-8794

SIZE.34 Fl. Oz.

MFG NO.81794

CONTAINERSqueeze Bottle

PRO LOCK



439

Loctite Corporation-Silicone Form-A-Gasket BlueHigh Temperature Silicone

Form-A-Gasket No. 2, Aviation Form-A-Gasket No. 3, Form-A-Gasket No. 1

SPECIFICATION:TYPE: VISCOUS LIQUID

COLOR: RED

27B

INDUSTRIAL GRADE SILICONEMAKES GASKETS AND FILLSLARGE GAPS BETWEEN MATINGPARTS. CURES TO A ROUGH FLEXIBLE RUBBER, USABLE TO TEMPERATURES OF 500°F. RESISTSCRACKING AND SHRINKING.WORKS ON METAL, MASONRY, PLASTICS, GLASS, TILE, RUBBER,AND FABRICS.

TEMPERATURE RANGE: -80°F TO 500° FTENSILE STRENGTH: 230 PSISOLVENT RESISTANCE: TOLUENE ANDXYLENE

SPECIFICATIONS:TYPE: VISCOUS LIQUID

COLOR: BLUE

6MA

HFORM-A-GASKET - RED

THIS HIGH TEMPERATURE SILICONEMAKES GASKETS FOR 600°F CONTINOUS OPERATION AND 650°FINTERMITTENTLY. RESISTS AGING,WEATHER AND THERMAL CYCLINGWITHOUT SHRINKING, CRACKING,OR HARDENINGTEMPERATURE RANGE: -80° F TO 600° FTENSILE STRENGTH: 230 PSISOLVENT RESISTANCE: TOLUENE AND XYLENE.

HARD-SETTING SEALANT (BROWN) CONFORMS TO MIL-S-45180B (ORD) TYPE 1 A FAST-DRYING, HARD-SETTING, HEAVY-BODIED SEALANT IDEALFOR PERMANENT ASSEMBLIES, FILLING IN UNEVEN SURFACES, REPAIRING GASKETS, FITTINGS, THREADED CONNECTIONS, AND CRACKED BATTERIES. TEMPERATURE RANGE - 65° TO 400°F, PRESSURES TO 5,000 PSI. APPLY WITH SPATULA OR PUTTYKNIFE.

1A

PCS/CTN

12

CONTAINER

Tube

SIZE

1-1/2 Oz.

MFG. NO.

30510

PART NO.

803-8001

6B

SILICONE FORM-A-GASKET BLUELOCTITE CORPORATION

HIGH TEMPERATURE SILICONE

PART NO.803-8627803-8860

MFG. NO.

3056030541

SIZE

3 Oz.8 Oz.

CONTAINER

TubePressurized

Can

PCS/CTN

126

PART NO.

803-8533

MFG. NO.

59630

SIZE

3 Oz.

CONTAINER

Tube

PCS/CTN

12

2A

PCS/CTN

12

CONTAINER

Tube

SIZE

1-1/2 Oz.

PARTNO.

803-8009

MFG. NO.

30513

PLIABLE-SETTING SEALANT ( BLACK) CONFORMSTO MIL-S-45180B (ORD) TYPE II A NON-HARDENING,HEAVY-BODIED, PLIABLE SEALANT FORSEMI-PERMANENT ASSEMBLIES. USE ONCOVER PLATES, FLANGES, THREADEDASSEMBLIES AND HOSE CONNECTIONS.IDEAL FOR METAL-TO-METAL ASSEMBLIES.ALLOWS EASY DISASSEMBLY. TEMPERATURERANGE -65° TO 400°F, PRESSURES TO 5,000 PSI.

FORM-A-GASKET NO. 2 AVIATION FORM-A-GASKET NO. 3

PART NO.

803-8019

PCS/CTN

12

CONTAINER

Brush Top Can

SIZE

4 Oz.

MFG. NO.

30517

NON-HARDENING SEALANT (BROWN) CONFORMS TOMIL-S-45180B (ORD) TYPE III A NON-HARDENING, LIQUID,BRUSHABLE SEALANT. ORIGINALLY MADE FOR THE AVIATIONINDUSTRY, NOW IN UNIVERSAL USE. EXCELLENT FOR SEAL-ING CLOSE- FITTING PARTS, WATERPUMPS, COOLANT AND HEATING HOSECONNECTION, THREADED ASSEMBLIES.LIKE FORM-A-GASKET # 1 AND # 2 , RESISTSWATER, STEAM, KEROSENE, GASOLINE, OIL,GREASE, MILD ACID, ALKALI AND SALTSOLUTIONS, ALIPHATIC HYDROCARBONSAND ANTI-FREEZE MIXTURES. TEMPERATURERANGE - 65° TO 400° F, PRESSURE TO 5,000 PSI.

3H

FORM-A-GASKET NO. 1


440

FUEL & LUBRICATION PRODUCTSPro-Seal Sealants & Adhesives

PRO SEAL - SEALANTS & ADHESIVES

GASKET REMOVER

Removes all types of gasket sealants and gasket makers. Softens burned on pre-cut gaskets for easy

removal. Minimizes sanding and scraping. Preventsdamage to flanges. For removing gasket and sealant

residue from sealing surfaces.

13.25 oz. Aerosol Can, 12 per case.

GASKET SHELLACCOMPOUND

INSTANT GAS TANK & RADIATOR REPAIR

SLEEVE RETAINERSECURES SLIP & PRESS FIT ASSEMBLIES

High strength anaerobic for locking/sealing cylindersleeves and liners, valve guides, and bearings whilepreventing corrosion. Restores fit to press fit assem-blies. 3500 psi holding strength. Resists tempera-tures from -65F to 450F (-54C to 232C).

1.69 fl. oz. (50ml) Carded bottle.Formulated to meet the catergory requirements ofMIL-R-46082B.

PART NO.803-80804

MFG. NO.80804

Easy to use putty permanently seals small holes, cracks, orsplit seams without draining or removing the gas tank or radiator.Hardens like steel in 2-4 hours. Full cure in 12 hours.

.7 oz. Carded ribbon, 12 per case.

PART NO.803-62020

MFG. NO.62020

#3 AVIATION GASKET MAKER SEALANT

Non-hardening, low viscosity, slow drying, sealant formulated forcoating pre-cut gaskets or replacing cut gaskets on close fittingmachined parts. Resists temperature from -65F to 400F (-54C to204C). Resists gasoline, diesel aviation fuels and oil, grease, andtransmission fluid. For coating or dressing pre-cut gaskets. Sealshoses and threaded connections.

40 oz. Brush top can, 12 per case.

MFG. NO.80035

PART NO.803-80035

PART NO.803-64050

MFG. NO.64050

A general purpose gasket dressing used to hold pre-cut gaskets inplace during assembly. Resists temperatures from -60F to 390F (-50C to 200C). Seals most common automotive fluids such aswater, oil, gasoline, diesel fuels, grease and antifreeze. For coatingor dressing pre-cut valve cover gaskets and fuel pump gaskets.Seals hoses and threaded connections.

2 oz. Brush top bottle, 24 per case.

MFG. NO.55555A

PART NO.803-55555

PRO-LOK THREADLOCK

(Removable) Blue anaerobic threadlocker forfasteners to 3/4” in diameter. For locking andsealing carburetor screws, valve cover bolts,water pump bolts, thermostat bolts, rocker armadjustment nuts, power tools and more.Formulated to meet the category requirementsof MIL-S-46163A.

(Permanent) Red anaerobic thread locker. For locking and sealingframe bolts, freeze plugs, wheel studs, cylinder block, and rockerarm studs, and more. Formulated to meet requirements of MIL-5-46163A. 20 fl. oz. (6ml) Carded Tube, 12 per case.

PART NO.803-24250

803-24206

MFG. NO.24250

24206

DESCRIPTION1.69 fl. oz. (50ml.)

.20 fl. oz. (6ml.) Carded Bottle, 12 per case

PART NO.803-27106

MFG. NO.27106



441

Pro Seal-Sealants & Adhesives

CLEAR RTV SILICONEADHESIVE AND SEALANT

Bonds, seals, caulks, and insulates. Withstands temperatures from -70F to 500F (-60C to 260C). Resists oil, transmission fluid, grease,water and antifreeze. Provides a water proof seal and remains flexi-ble. For bonding and sealing glass, metal, leather, vinyl, and rubber.Seal tail lamps, electrical wires and windows.3 oz. Carded tube, 12 per case.

SILICONE INSTANT GASKETCOPPER XS HI-TEMP RTV

For use on exhaust manifolds, oil pans, valve covers, intake mani-fold end seals, thermostat housings, and water pumps. Will not fouloxygen sensors. 3 oz. Carded tube, 12 per case.

ALUMINUM RTV SILICONEINSTANT GASKET

LOW VOLATILE FORMULA-SENSOR SAFE

Replaces most pre-cut gaskets by forming gaskets in place. Won’t foulcomputer sensors. May also be used as a gasket dressing. Resistshigh pressure and temperatures from -80F to 600F (-62C to 315C).Resists oil, transmission fluid, grease, and antifreeze. For use onwater pumps, valve covers, oil pans, rear end housings, transmissionpans, timing chain covers, thermostat housings and more. 3oz. Carded tube, 12 per case.

Environmentally and user safe formula. Contains no metallic particles.Lubricates assemblies exposed to heavy contact pressure. For use onhead bolts, manifold studs, spark plug threads, battery terminals, axleshafts, U bolts, lug nuts, and wheel brgs.

PRO SEAL - SEALANTS & ADHESIVES

PART NO.803-78002 78002

PART NO.803-80066

MFG. NO.80066

PART NO.803-79006

MFG. NO.79006

ANTI-SEIZE LUBRICANT

Replaces most pre-cut gaskets. Won’t foul computersensors. Resists high pressure and temperaturesfrom -80F to 600F(-62C to 315C). Resists oil trans-mission fluid, water and antifreeze. For use on waterpumps, valve covers, oil pans, rear end housings,transmission pans, timing covers and thermostathousings.

BLUE RTV SILICONEINSTANT GASKET-LOW VOLATILE

FORMULA-SENSOR SAFE

PART NO.803-80006

803-80009

MFG. NO.80006

80009

DESCRIPTION3 oz. Carded Tube, 12 per case

8 oz. Power Can, 6 per case

BLACK RTV SILICONE INSTANT GASKET


Forms gaskets in place instantly. Replaces cork, paper, asbestosand felt pre-cut gaskets. Dries tough and flexible. Resists highpressureand temperatures from -80F to 600F (-62C to 315C).Resists oil, antifreeze, grease, and transmission fluids. For use onoil pans, rear end housings, water pumps, valve covers, thermostathousings. Seals windshields,sunroofs, doors lights and hose connections. 3 oz. Carded tube, 12 per case.

PART NO.803-80046

MFG. NO.80046

Specially formulated for high temperature applications to 700F(370C). Safe for all car models. Won’t foul computer sensors.Resists high pressures to 5,000 psi. Resists oil, anitfreeze grease,and transmission fluids. Dries flexible. Resists shrinking and crack-ing. For use on exhaust manifolds, timing covers and most hi-tempapplications. 3 oz. Carded tube, 12 per case.

RED HI-TEMP RTV SILICONE INSTANT GASKET


PART NO.803-80726

MFG. NO.80726

RTV SILICONE INSTANT GASKETBLUE XS ADVANCED

Low odor, non-corrosive, low volatile formula designed to replace orcoat pre-cut gaskets on high performance engines manufacturedafter1980. Will not foul oxygen sensors. For use on oil pans, trans-mission housings, intake manifolds, cam shaft covers, valve coversand timing covers. 3.35 oz. Carded tube, 12 per case.

PART NO.803-80003

MFG. NO.80003

PART NO.803-33001

803-33008

MFG. NO.33001

33008

DESCRIPTION1 oz. Carded Tube, 12 per case

8 oz. Brush Top Bottle, 6 per case


442

FUEL & LUBRICATION PRODUCTSGasket Sealer, Weatherstrip AdhesiveJ-B Weld CompoundRadiator Stop Leak, Thread Sealant with Teflon

Used by owners of autos, trucks, buses, tractors, and diesel equipment.Safe in diesels with water filters. Mixes with anti-freeze. Seal holds in all pressure systems. Won't

clog or cause overheating. Works in aluminum, brass, or plastic.

EXCELLENT PROFITS! MONEY-BACK GUARANTEE!

DISPLAY DISPENSER CONTAINS 24-TUBES

IMPROVES SEALING RELIABILITY OF CONNECTIONS. SPEEDS ASSEMBLY, CLEAN-UP.

INSTANTLY SEALS PIPES, FITTINGS AND THREADED CONNECTIONS AGAINST LEAKAGE ANDLOOSENING. SEALS STEAM LINES, PLUMBING FIXTURES AND WIDE VARIETY OF PIPING.SEALS PRESSURES TO BURST RATING OF PIPE IN AIR, OIL, GAS, OR HYDRAULIC SYSTEMS.LUBRICATES THREADS FOR EASY ASSEMBLY. PREVENTS GALLING AND CORROSION. OUTPERFORMS TAPES AND PIPE DOPES. APPROVED BY BUREAU OF STANDARDS AND APPEALSOF NYC. NSF APPROVED*.

* FOR PORTABLE WATER AND/OR DRAIN,WASTE AND VENT SYSTEMS FOR USEWITH THREADED CONNECTIONS ANDFLANGE SURFACES.

There are imitations, but this is the "one that works" with 3-WAY PROTECTION:

1. Stops leaks quickly!2. Inhibits rust!3. Lubricates!

WEATHERSTRIP ADHESIVESETS QUICKLY BUT STAYS TACKY,NEVER BECOMES BRITTLE ORHARD. GASKETS STAY IN PLACE,YET ARE EASILY REMOVED ATTIME OF DISASSEMBLY. CORK GAS-KETS THAT HAVE SHRUNK CAN BESTRETCHED AND HELD WITH GAS-KET SEALER.

PRICES ARE PER TWIN TUBE

ALSO... J-B KWIK SKIN CARD PACKAGE

PART NO.

752-8001

SIZE

5 Oz.

PACKED

6

MFG. NO.8001

FOR ADHERING ALL TYPES OF RUBBER WEATHER-STRIPPING TO CAR DOORS AND TRUNKS. LIGHT COL-ORED ADHESIVE, VERY FAST DRYING, EXCEPTIONALBONDING STRENGTH. CAN BE USED FOR ADHERINGVINYL TRIM HEADLINERS AND SIDE PANELS.

GASKET SEALER

PART NO.

803-2

MFG. No.2G

SIZE

2 Oz.

PACKED

12 Per Display CTN

J-B WELD COMPOUNDTHIS PRODUCT PRODUCES A COLD WELD THAT CREATES A SUPERSTRENGTH STEEL BOND TO ANY SURFACE. JUST MIX EQUAL AMOUNTS FROMEACH TUBE ON ANY CLEAN DISPOSABLE SURFACE.

PARTNO.

803-801803-802

803-803

PACKED

6 Twin Tubes Per Display Carton1 Twin Tube Per Skin Card

1 Twin Tube Per Skin Card

MFG. NO.

8265TT8265-S

8276

RADIATOR STOP LEAK

MFG. NO.SS1928

PART NO.803-851

THREAD SEALANT WITH TEFLON*

SIZE

4 Oz.

CONTAINER

Brush Top Can

PCS/CTN

12

MFG. NO.

30534

PART NO.

803-8632

14H



443

Super Seal Tire SealantLubricants

FORAUTO

TRACTORTIRES

HEAVY DUTY MULTI-PURPOSE LUBRICATINGGREASE (LITHIUM BASE)

FORMULATED TO MEET THE REQUIREMENTS OF A WIDERANGE OF APPLICATIONS. RECOMMENDED FOR CHASSIS,

UNIVERSAL JOINTS,AND OTHER GENERAL PURPOSE APPLICA-TIONS AROUND THE HOME, FARM AND SHOP. LONG-LASTING,

HIGH PERFORMANCE, HARD WORKING.SOLD IN CARTON QUANTITIES

MARINE CORROSION CONTROL AND TRAILERBEARING GREASE

A SOPHISTICATED LUBRICANT DEVELOPED FOR USE INSEVERE OPERATING CONDITIONS CAUSED BY SALT WATER,

SALT AIR AND ATMOSPHERIC CHEMICALS. IT POSSESSESOUTSTANDING MECHANICAL STABILITY, EXCELLENT WATERRESISTANCE AND SUPERIOR RUST AND CORROSION PRE-

VENTIVE CHARACTERISTICS. RECOMMENDED FOR CORRO-SION MARINE APPLICATIONS, BOATS, TRAILER, WHEEL BEAR-

INGS OR ANY WHEEL BEARING SUBJECT TO CORROSIONINCLUDING DISC BRAKE WHEEL BEARINGS.

SOLD IN CARTON QUANTITIES

WHEEL BEARING GREASE

FOR WHEEL BEARINGS, ROLLER BEARINGS, AND SIMILAR APPLICATIONS.


TIRE SIZE AMOUNT USED

4.00-8 ONE PINT

4.00-9 ONE PINT

4.00-12 ONE QUART

5.50-16 ONE QUART

6.00-16 ONE QUART

5.50-18 ONE QUART

9.00-24 FIVE QUARTS

10.00-24 FIVE QUARTS

9.00-32 SIX QUARTS

10.00-28 SIX QUARTS

11.00-28 NINE QUARTS

11.00-38 NINE QUARTS

803-910

Will work withAnti-Freeze

FOR TUBE AND TUBELESS TIRESMAKES ITS OWN FIBER RUBBER PLUG.

ESTIMATED QUANTITY OF SUPER SEAL NEEDEDFOR TRACTOR AND IMPLEMENT TIRES (PER TIRE)

FORMULA"100"WATER

TREATEDTIRES

WITH ORWITHOUTSODIUM

SAE 85W140 EPPREMIUM BLEND GEAR OIL CONTAINING EXTREME PRES-SURE ADDITIVES TO PROVIDE HEAVY DUTY PROTECTION.

AN OUTSTANDING LUBRICANT FOR USE IN GARDENTILLERS AND OTHER EQUIPMENT.

SUITABLE FOR TRACTOR, TRUCK AND INDUSTRIAL APPLI-CATIONS SUCH AS MANUAL TRANSMISSIONS, DIFFEREN-TIAL, OR OTHER GEAR BOXES WHICH REQUIRE A HEAVY-

DUTY MULTI-PURPOSE LUBRICANT SAE 85W140.

Multi-P

urpose Grease

JT-6

LITH-0FLEX

Econolith

SUPER SEAL LUBRICANTS

SIZE

14 OZ.

PARTNO.

421-1

PACKED

10 PER CARTON

SIZE

14 OZ.

PART NO.

421-2

PACKED

10 PER CARTON


Meets or exceeds the performance requirements of API GL-2 thru GL-6, MIL-L-2105D, Mack GO-H.

JT-7

Multi-PurposeGear Lubricant

SAE 85W-140

SIZE

QUART

PARTNO.

421-7

PACKED

12 PER CARTON

PARTNO.

421-3421-4

PACKED

12 PER CARTON6 PER CARTON

SIZE

1 lb.4 lb.

803-906

SOLD IN CASE QUANTITIES

PARTNO.

803-916803-932803-901803-905803-906803-910

CASE

241241

DESCRIPTION

16. oz. Bottle32 oz. Bottle1 Gal. Bottle5 Gal. CanAir InjectorPump for Gallon Containers

MFG.NO.

F-16F-32F-1F-5F-6F-10

Super Seal FormulaTire Circumference X Tire Diameter ÷ 144 X .50 = the number of 16 oz.

containers needed.With water filled tires,

please double the mixture.


444

FUEL & LUBRICATION PRODUCTSBerryman Tire Seal-RBerryman B-12 ChemtoolBerryman Brake Cleaner

BERRYMAN TIRE SEAL-RPermanently Seals Leaks and Prevents Flats in all Tires Tubed or Tubeless.

SEAL-R is specially formulated to provide continuous protection against flats caused by nails, thorns, and cap separation.

SEAL-R contains an agent to prevent freezing and to provide protection against rim rust and corrosion.SEAL-R remains fluid and will not ball-up in tire or affect balance.SEAL-R is water soluble and can be removed from tire if patching is necessary.SEAL-R makes an excellent bead seal and prevents air loss through porous rims.SEAL-R is a must for farm implement and industrial tires.

Sold 4 per case.

BERRYMAN B-12 CHEMTOOL

Sold 12 per case.

Quickly dissolves gum and varnish from the carburetor, PCV valve, automatic choke, carburetor linkage and distributor shaft.

No CFCs

BERRYMAN BRAKE CLEANER

Sold 12 per case.

Effectively removes brake fluid, grease, oil, and other contaminants fromall brake parts including pads, drums, cylinders, springs and other related parts.

No CFCs

PART NO.803-8800

MFG. NO.1301

DESCRIPTION1 gallon jug w/1 oz.

injector pump

PART NO.803-8801

MFG. NO.0113

DESCRIPTION16 oz. Aerosol Can

PART NO.803-8802

MFG. NO.1420

DESCRIPTION20 oz. Aerosol Can

®

®

®

®

®

®



445

Belt DressingWD-40 Compound

Micro Mist

BELT DRESSING

WD-40 COMPOUND

M2-06

STOP BELT SLIPPAGE ANDEXTEND BELT LIFE. ELIMINATES

SQUEAKING AND GLAZING.RESTORES PLIABLILITY AND

FLEXIBILITY.

MAP NO. SIZE803-710 6 OZ.

PACKAGED AND SOLD 12 PER CASE

LOOSENS RUSTED PARTS AND FREES STICKYMECHANISMS. WD-40 PENETRATES DEEP TO FREE UP FROZENOR RUSTED METAL PARTS AND FASTENERS. KEEPS CONTROLS

AND LINKAGES WORKING FREELY. DISPLACES MOISTURE. WD-40GETS UNDER WATER, DRIVES IT OFF AND KEEPS IT OFF. WD-40

IS A NONCONDUCTOR. USE IT TO DRY OUT ELECTRICAL ANDELECTRONIC EQUIPMENT. STOPS SQUEAKS. FINDS SQUEAKS

AND LUBRICATES THEM IN HARD-TO-GET-AT MECHANISMS. WD-40IS SILICONE-FREE - NO MESSY, GUMMY RESIDUE. PROTECTS

METAL. WD-40 LUBRICATES AND PROTECTS AGAINST MOISTUREAND CORROSIVE ELEMENTS WITH AN INVISIBLE BARRIER.

CLEANS. REMOVES TAR, GREASE AND ADHESIVES.

SOLD IN CASE QUANTITIES

* SEEKS FRICTION* STOPS RUST AND CORROSION* CLEANS, LUBRICATES AND PROTECTS

MICRO MIST IS A HEAVY DUTY PENETRATING OIL THAT HASBEEN ON THE MARKET FOR FORTY YEARS. THE SPECIALBLEND OF LUBRICANTS, FRICTION SEEKERS AND CORRO-SION INHIBITORS MAKE MICRO MIST A MUST FOR PEOPLEWHO WANT THE BEST. SOME APPLICATIONS INCLUDE:INDUSTRY, EQUIPMENT, HOME, SHOP, FARM, SPORTSEQUIPMENT AND MARINE. MICRO MIST PENETRATES FAST FOR LONG LAST-ING PROTECTION, FREES STICKY PARTS, STOPS SQUEAKSAND SEEKS FRICTION. IT IS AVAILABLE IN EASY TO USEAEROSOL OF BULK LIQUID FORM.

MICRO MISTMICRO MIST

HEAVY DUTY PENETRATE

PACKAGED AND SOLD 12PER CASE

* Spray Bottle Only - NO CONTENTS

MAP NO.421-11421-15

421-101421-301

MFG. NO.4001140015

40010140301

DESCRIPTION8 oz. Spray Can11 oz. Spray Can

1 Gallon Bulk*16 oz. Bottle Only

PACKED121214

PART NO. SIZE421-1615 13 OZ.

NEW! PB Blaster Penetrating Catalyst

A very powerful spraypenetrating catalyst that breaks loose the surfacetension of frozen parts and protects against furtherrust and corrosion. Sold incase quantities of 12.12.2oz can.MAP No. MFG No.421-1020 16-PB


446

FUEL & LUBRICATION PRODUCTSS’OK

Power ServiceFuel Additive

THE PENETRATING OIL THAT SPEAKS FOR ITSELF( INVITES COMPARISON WITH ANY OTHER )

S'OK

POWER SERVICE

LOOSENS RUSTY NUTS, BOLTS, SCREWS, FITTINGS; RECLAIMS CORRODEDVALVES. SPEEDS REPAIR WORK ON MUFFLERS, TAIL PIPES, SPEEDOMETERCABLES,PLUG REMOVAL, HINGES, LOCKS, CABLE CONTROLS, ETC. EASESTHREADING & OTHER MACHINE WORK ON ALUMINUM. TOUGH ENOUGH FORREPAIRS AND MAINTENANCE OF HEAVY ROAD EQUIPMENT, MARINE GEAR, CHEMI-CAL PLANT EQUIPMENT, AIR CONDITIONERS, ETC.

LEAVES PROTECTIVE FILM - PREVENTS RUST AFTER APPLICATION

FUEL ADDITIVE

SOLD IN CASE QUANTITIES ONLY

DESCRIPTIONSQUIRT CANSQUIRT CAN

BULK CONTAINERAEROSOL

SIZE8 OZ.16 OZ.1 GAL.10 OZ.

PACKED18 PER CASE12 PER CASE1 PER CASE12 PER CASE

PART NO.421-1001421-1002421-1003421-1006

Diesel Fuel Supplement • DISPERSES WATER IN DIESEL FUEL TO PROTECT FUEL INJECTORS AND EXTEND LIFE OF FILTERS.

• CLEANS FUEL INJECTORS.• DISPERSES HEAVY FUEL RESIDUES IN THE DIESEL TO A MORE BURNABLE SIZE TO PREVENT FUTURE BUILDUP OF CARBON DEPOSITS.

• REDUCES HIGH-SULFUR WEAR RATES.• MAINTAINS CLEAN FUEL SYSTEM FOR PEAK EFFICIENCY, INCREASED POWER, LOWER FUEL CONSUMPTION.

• PREVENTS FUEL-FILTER ICING, WAX FORMATION IN THE FUELAND FUELGELLING, EVEN IN SUB-ZERO WEATHER.

• MAKES COLD WEATHER STARTING EASIER AND MORE RELIABLE. • KEEPS YOUR TRUCK OUT OF THE SHOPAND ON THE ROAD - MAKING MONEY.• PROTECTS AND EXTENDS THE WORKING LIFE OF DIESEL ENGINE.

TO CLEAN INJECTORS, REMOVE EXCESSIVEWATER OR RELIQUEFY GELLED FUEL

32 OUNCES TO 25 GALLONS96 OUNCES TO 100 GALLONS

TO DISPERSE WATER ANDMAINTAIN CLEAN FUEL SYSTEM

32 OUNCES TO 100 GALLONS96 OUNCES TO 300 GALLONS

SIZE

32 OZ.96 OZ.

PACKED

12 PER CASE4 PER CASE

MFG. NO

10251040

PART NO.

421-1025421-1040

PART NO.421-1009

SIZE8 OZ.

PACKAGED24 Per Case


JOHNSEN’SSTARTING ETHER


PART NO.800-10

SIZE7.22 OZ.

PACKAGED12 Per Case

ASSURES QUICK STARTS ONGASOLINE AND DIESEL ENGINES.WORKS TO 55O F.



447

Sani-Tuff Heavy Duty Hand WipesScott Shop TowelsShop Towels In A Box

PRICED PER ROLL - ORDERIN CASE QUANTITIES30 ROLLS PER CASE -

WEIGHT 32 LBS.

SHOP TOWELS IN A BOX

• Clothlike Strength• Spongelike Absorbency• More Economical than Cloth• Remarkably Lint Free• Blue Color hides the Dirt• Big Value - 200 Count

Priced per box - Sold in case quantities8 boxes per case - weighs 35 lbs.

A QUICK AND HANDY WAY TO CLEAN UP GREASY, DIRTY JOBS. ALL THE STRENGTH ANDABSORBENCY OF COTTON SHOP TOWELS - AT JUST A FRACTION OF THE COST. EACH DISPENSABLETOWEL IS THICK ENOUGH TO HANDLE YOUR TOUGHEST MESS, AUTOMOTIVE, OR OTHERWISE. FITS

ANY STANDARD TOWEL HOLDER.

• Pre-moistened wipes• Green/white, 12” x 12” • 50 per canister, 8 canisters per case

PART NO.752-39

SANI-TUFF HEAVY-DUTY HAND WIPES®

Priced per canister - Sold in case quantities

The Complete Waterless Hand Cleaning System

40 SQ. FT. TOTAL AREA50-1 PLY SHEETS - 11" X 10.4"

INDIVIDUALLY WRAPPED

PART NO.752-35

PART NO.752-36

SCOTT SHOP TOWELS


448

FUEL & LUBRICATION PRODUCTSM30 Hand CleanerM30 Citrus Hand Cleaner with PumiceLava Liquid Soap

M30 HAND CLEANERORIGINAL M30

HAND CLEANERM30 QUICKLY PENETRATES AND DISSOLVES GREASE, TAR, INK, GLUE, ANDOTHER HEAVY INDUSTRIAL GRIME AND GENTLY LIFTS THEM OUT TO BE RINSEDOR WIPED AWAY. M30 HAS A LIGHT PLEASANT ODOR. M30 CONTAINS A BLENDOF SKIN CONDITIONING ESSENTIAL OILS, PLUS LANOLIN TO HELP CONDITION HANDSAGAINST CHAPPING BY REPLACING SOME OF THE BODY OILS LOST IN NORMALWASHING PROCESS. M30 CONTAINS 3, 5, DIMETHYLY-4-CHLOROPHENOL, A NON-TOXIC ANTISEPTIC, TO INHIBIT THE GROWTH OF FUNGUS, INDUSTRIALMOLD AND BACTERIA. M30 IS U.S.D.A. APPROVED.

SOLD IN CASEQUANTITIES

M30 CITRUS HAND CLEANER WITH PUMICEM30 QUICKLY PENETRATES AND DISSOLVES GREASE, TAR, INK, GLUE,AND OTHER HEAVY INDUSTRIAL GRIME AND GENTLY LIFTS THEM OUT TOBE RINSED OR WIPED AWAY. M30 HAS A LIGHT PLEASANT ODOR. M30CONTAINS A BLEND OF SKIN CONDITIONING ESSENTIAL OILS, PLUS LANO-LIN TO HELP CONDITION HANDS AGAINST CHAPPING BY REPLACINGSOME OF THE BODY OILS LOST IN NORMAL WASHING PROCESS. M30CONTAINS 3, 5, DIMETHYLY-4-CHLOROPHENOL, A NON-TOXIC ANTISEPTIC, TO INHIBIT THE GROWTH OF FUNGUS, INDUSTRIAL MOLDAND BACTERIA. M30 IS U.S.D.A. APPROVED.

PARTNO.754-953

MFG.NO.5019

SIZE1 GAL.

CASEQTY.4

LAVA LIQUID HAND SOAP• PUMICE POWERED• CLEANS EXTRA DIRTY HANDS• CONTAINS MOISTURIZERS• PERFECT FOR THE WHOLE FAMILY• 7.5 oz PUMP BOTTLE

PART NO.754-960

PACKAGED AND SOLD 12 PER CASE

MFG. NO.

14014004

PART NO.

754-900754-903

SIZE

14 OZ.4-1/2 LBS.

CASEQTY.126

fuel & lubricaton section - dragon

Documents