fttx brochure

FTTx Solutions

Call 1-800-238-7514www.ptsupply.com

At Power & Tel, we work where you work. Power & Tel’s goal is to provide you a complete product solution for all your critical needs. On the following pages, you will find the products and manufacturer partners that represent our FTTx offering. From the CO/Headend all the way to the Customer Premise — we supply the solutions that will help you build and maintain your FTTx network. Featured are products from

these categories:

• CentralOffice/Headend• Management&Connectivity• DistributionHubs/Cabinets• SpliceClosures/NetworkAccessPoints• Pedestals/Enclosures• DropCables• HardenedGateways&CPE• Splicing/FusionSplicers• TestEquipment• FiberOpticCable

Our hope is that you will use this information as abeneficialguideinyourFTTxordering.Moredetailed information including availability, pricing and in-depth product specifications are available by contacting your Power & Tel representative

or by emailing [email protected].

Central Office/Headend

Carrier class multi-service access •and aggregation platform that bridges the gap between the existing and the next generation networks

WithapureEthernetcore,sup-•ports both legacy and emerg-ing service interfaces over both copper and fiber, easily scaling to support even the most bandwidth intensive applications

Systemfunctionsasahighlyca-•pableGPONOLTandflexibleaccessplatform capable of meeting a va-riety of legacy and merging service requirements

TDMtransportthroughaGPONis•providedwithPseudowireEmula-tion(PWE3),whichterminatesonthePWE3gatewayintheTotalAc-cess5000andonanONT

VideooptionswiththeTotalAccess•5000GPONOLTincludebothIPTVand RF video

IPTVfunctionsintheTotalAccess•5000andtheGPONOLTAccessModuleprovideIGMPsignalingand multicast replication func-tions. RF Video Overlay at 54-870 MhzissupportedonaGPONasathird wavelength at 1550 nm using outboard amplifiers and wavelength combiners

ADTRAN OPTI 6100 ADTRAN Total Access 5000/5006

OPTI-6100isahigh-density,•compact, multi-service opti-cal access and aggregation platform

Perfectly suited for delivery of •highdensityDS1sorE1s,Ether-netoverSONET,EthernetoverPDH,TDMoverPseudowire,multipleDS3/E3delivery,customer premises service delivery, and mobile backhaul. InterworkingwithbothSONETandSDHopticalnetworksisachieved through the use of industry standard protocols and extensive field testing

Servicesareconfiguredvia•plug-in units, which are provi-sioned according to the service needs of individual locations

Flexibility of multiple plug-in •units eliminates the need for separate network elements and minimizesCAPEXandOPEXby delivering multiple services from one system

Numerousnetworktopologies•are supported and include terminal mode, hub, end-to-end OPTI-6100(LMX,MXorSMXchassis)andrings

Motorola AXS1800 OLT / AXS2200 OLT

Voice:

TDMvoicewithIntegrated•

GR303/TR008GatewayOLTcard•

SIPVoIP•

Video:

IPTVandIGMPmulticast•

870MhzRFoverlaywithIntegrated•MOTorolaReturnPathDemodulator(MOT-RPD)

Data:

200GbpsswitchcapacityOLT•

Non-blocking10GbpsperOLTslot•

1GbEand10GbEWANOLTinterfaces•

Zhone’snewIntelligentTerabit•AccessConcentrator.ThenextgenerationMSAPplatformforhighbandwidth residential and business services such as:

MultipleHigh-DefinitionTelevision,•VideoonDemand,VideoConferenc-ing,VoiceandHighSpeedInternetAccess

Non-blockingarchitecturedesigned•with interfaces and functionality toseamlesslyconnecttoMetronetworks.

400Gbpspurepacketswitchingin•conjunctionwith10Gbpsredun-dant links to each slot card.

MXKprovidesCarrier-ClassHigh•Availabilitywithredundantcon-trollers, uplink ports and hitless software upgrade capability

MXKoptionsforFTTxsolution:•

SupportsActiveEthernetandGPON•line cards and interoperates with indoorandoutdoorONTs.

ActiveEthernetandGPONsolution•onthesameMXKchassisgivestheserviceprovidertheflexibilitytolayout their network in the most efficient manner, using combination ofGPONsplittersanddedicatedfiber connections.

Zhone MXK – ITAC

Management & Connectivity

Availablepreterminatedwithintra-•facility(IFC)oroutsideplant(OSP)cables or in termination and splice configurations

Integratedcablemanagement•

Angledbulkheadpaneloffersad-•ditional protection from bends that can increase attenuation and loss

Vertical cable guides effectively •segregate cables, aiding in easy-to-follow routing paths

AvailableinSCandLCconnector•styles and multiple fiber cable styles

288terminationsusingeitherSCor•LCconnectors

ADC LSX-288

ADC FL2000

TheFL2000Systemisaflexible,modular and economical series of fiber products for current and evolving communications and data networks.

Preconfigured panels with cus-•tomer specified features simplifies the ordering process and saves installation time

Modulardesignsatisfiesboth•current needs and future growth requirements

Full line of options and accessories •ensures compatibility with existing opticalequipment

Hinged on left-hand side to allow •easy access to rear of front plate and interior of panel

Designedfor19-inch(48.26cm)•racks or cabinets, but mounting kits areavailablefor23-inch(58.42cm)rack-mounting or wall-mounting

ADC Next Generation FramesPartofADC’sOpticalDistribution•Frame family

Provideacentralizedpointfor•termination, splicing, slack storage and housing passive optical com-ponentslikesplittersandWDM’s

Features industry-leading density •and fiber management

Easyconnectoraccess•

Bend radius protection•

Clear cable routing paths•

Physical protection•

ADC FiberGuide® Optical Raceway System Speed of Installation: • The FiberGuideSystemfeaturesawide variety of products that allowforquickandeasyinstal-lation.

Speed of Deployment: • The ExpressExitsystemenablesnewdrops to be added or removed quicklyandeasily.

Raceway Flexibility:• Fiber-Guidefeatures38supportstruc-tures, over 75 fittings, multiple drop options and several other components to suit any application.

Fiber Protection: • FiberGuideensuresthata2minimumbendradius is maintained throughout the system.

Strength and Durability: • 100% raceway reliability - stands up to any challenge.

ADC Connector Identification System

TracerLight® Patch Cords ADC’sinnovativeTracerLight™Con-•nectorIdentificationSystemoffersaquickandaccuratemethodofidentifying the termination point of optical patch cords

EachendofaTracerLightpatch•cordfeaturesaflashinglightsourceallowing technicians to visually trace individual patch cords from one end to the other without pull-ing or affecting the patch cord

Dramaticallyminimizestheriskof•taking the incorrect fiber out of service

Improvessystemturnupspeedand•accuracy

TracerLightpatchcordsmeetall•performance criteria of standard ADCpatchcords

Components do not affect optical •performance of the patch cord

TracerLightpowersourceproduces•aflashingLEDoneachendofthepatch cord

TracerLight® Power Source Used in conjunction with Tracer-•Light®patchcords,theTracer-Light®powersourceallowsusersto easily locate and distinguish specific connectors

Dramaticallyminimizestherisk•of taking the wrong fiber out of service

Improvessystemturnupspeedand•accuracy

TracerLightpatchcordsmeetall•performance criteria of standard ADCpatchcords

IdeallysuitedforSAN(Storage•AreaNetwork)andcross-connectpatching

72% reduction in jumper turn-up •timesand13%reductioninac-cidental down-time.

Aluminumconstruction•

Textured black powder coat finish •

UniversalWECO/TIA19”/23”rack•compatibility

(12)LGX118adapterplate/mod-•ule mounting positions

Mountingdepthadjustablefrom•flushto8”in1”increments

DataCenters•

EnterpriseNetworks•

Telecommunications Closets •

Central Offices / Headends•

Up to 24-port confi gurations •

Single-slotanddouble-slot•

LGX®118compatible•

AvailableinSC,STandLC•(additional confi gurations availableuponrequest)

CompatiblewithallLanSystemTM•Patch Panels

Includesmodule,cover,adapt-•ers, pigtails, splice sleeves, and all requiredhardwareforinstallation

Availableinwhiteorblack,and•single-mode or multimode

Organizedfiberrouting•

Fixed solution, no moving parts •

Easeofspliceidentification•

Front and rear access •

Telecommunications Closets •

DataCenters•

Customer Premise •

LocalAreaNetworks•

WideAreaNetworks•

Central Offi ces •

HubSites•

Cabinets •

Remote Terminals•


AFL Xpress Fiber Management™

AFL LightLink™ Poli-MOD Pigtailed Optical LightLink Interconnect Module

Fits comfortably into new and •existing interconnect, cross-connect, customer premise, and co-location environments

Mostcommonconnectorstyles•and types available

Compatible with industry stan-•dardequipmentframes

Modulardesign•

Slide-outtraywithreliefcut-outs•for simplified connector access

Optional splice tray kit for on site •conversion to patch and splice panel

Optional front door key lock for •heightened protection of internal components

Telecommunications closets •

DataCenters•

Customer Premise •

LAN/WANNetworks•

Central Offices / Headends •

Hubs / Cabinets / Remote •Terminals

FTTH/FTTBNetworks•

AluminumConstructionper•ASTMB209

Durabletexturedpowdercoat•finish available in black or white

Universal19/23”EIA/TIArack•compatibility

StandardDensity:Upto18Fiber,•HighDensity:Upto36Fiber

LGX118Compatible•

Standardcablestublocationis•right rear exiting upward

AFL LightLink™ LANSystem™ 1RU Fiber Termination Patch/Splice Panel

FTTx Solutions



Clearfield FDS Frame and InterbayFrames are •

used for mount-ingequipmentina central office or data center appli-cation.Inadditionto incremental slack take-up, the interbay provides a route path be-tween frames.

FieldSmart•FiberDistributionSystem(FDS)Frames are avail-ablein7’,8’,or9’

heightsandin19”and23”widths.These seismic frames come with anunequalflange,andwhenusedwithFieldSmartFDSPatchPanels,provide the highest port density in the industry; up to 1728 ports in a 7’ frame.

Interbaycablemanagementpanels•are ordered to match the height of the frame. They are available in 7, 8and9footversions.Endguardsare available for the end of a line uptominimizepotentialdamageto jumpers.

Frames have 500 pound weight •capacity

Uprights are high-strength, low •alloy steel

Front and rear of upright tapped •for 12-24 screws

Frames can be ordered loaded with •panels and cable management as a “rackandstack”solution

Weco1”holespacing•

3“radiusspoolsprotectbend•radius

Endguardsareoptional•

Accommodatesvarietyoffiber•terminations

CompleteFTTx864-fibersolution,•including splitters located in a standard 7 foot rack

Efficientutilizationofspacefor•high-density applications and systems

Splittersfullycompatiblewiththe•CorningCableSystemsOptiTect®LocalConvergenceCabinet,GenIIISeriesfamily

Emptyconnectorhousingscan•easily be outfitted with optical splittersandWDMmodules

Innovativejumperroutingand•management

Wall-mountable solution set •provides interconnect or cross connect capabilities

GenIIIFTTxsplittermodulecon-•figurationprovidesasimple,quickand incremental growth capability

RDUPListed•

Corning Eclipse® Hardware Product

Corning Enhanced Management Frame (EMF)

DesignedforFTTx,cross-connectand•interconnect applications

Staggeredside-mountedrouting•guides allows for superior fiber man-agement and control

Modulesextendandretractindepen-•dently for minimal adjacent connector disturbance

User-friendly features including single •jumper length, in-bay jumper storage, transparent modules and multiple inter-bay routing options

On-frame splicing maintains the maxi-•mum 1728-fiber terminations

Full minimum radius control through-•out the frame with top and rear strain-relief

FTTx Solutions


Management & Connectivity Clearfield FDS Patch Panel

Provides an interconnect or cross-•connect environment for up to 24, 72, 144, or 288 ports of high-density fiber in central office / headend environments.

RUSlisted•

Front access to pre-terminated •assemblies with removable adapter plates for testing, cleaning and maintenance

Front and rear access to panel•

On- or off-frame splicing configura-•tions support cable constructions up to 144-fiber

ComplianttoTelcordiaGR-449,•GR-20andGR-409,andTelcordia326compliantterminations.OpticalcomponentconfigurationsuseGR1221/1209compliantdevices

Supportsallindustrystandard•single mode/multimode connectors

Ruggedizedhingedandremovable•front cover

Individualradiusfingersprovide•organizedandintuitivelymanagedfiberjumpersandminimizepile-up

UtilizesClearfield’sClearviewCas-•sette, which houses critical circuits by 12-fiber sub-units or buffer tubes and is completely removable for hot-swap changes

Ruggedizedcableclampprotects•against twisting and pistoning at the assembly breakout point

Pre-terminatedOSPbuffertubesare•protected with bend-limited tubing and slack stored inside panel for protection against environmental and human damage

Optional interbay management •panels enhance fiber jumper routing and excess cable storage capacity

Clearfield FDS Optical Component Chassis

TheFieldSmartFDSOpticalCom-•ponent Chassis is used for housing OpticalComponentModules.ItisavailableinClearfieldhorizontallymountedversionsandanLGXverti-cally mounted version.

RUSlisted•

ComplianttoTelcordiaGR-449•

Supportsallindustrystandard•single mode/multimode connectors

Ruggedizedhingedandremovable•front cover

Ruggedizedcableclampprotects•against twisting and pistoning at the assembly breakout point

Front access with removable •adapter plates for testing, cleaning and maintenance

Front and rear access to panel•

Horizontalmountingversionsofthe•FieldSmartFDSOpticalComponentChassisareavailableinfoursizestoaccommodateanysizeproject

Chassiscanbeorderedineither19”•or23”mountingversionswithoutlosing any capacity

Chassis incorporate the superior •fiber management systems of the FieldSmartFDSPanellinewhichareavailableinthesesizes:1.75”(1RU),3.5”(2RU),6”and11”.

FoursizesofFieldSmartOptical•Component Chassis allow for a “grow-as-you-go”designthatallowsyou to reserve rack space for future growth.

Tyco FOSC OC XC

The course wavelength division multiplexing(CWDM)techniquecom-bines(ormultiplexes)twoormoresignals with different wavelengths in one common fiber. The same com-ponents can also be used to separate thewavelengths(de-multiplexing)atthe remote location.

These devices are integrated into •therangeofTycoElectronics’FOSCfiber-optic splicing closure trays allowing for easy integration in en-closures,wall-mountboxes,orODF’s.

Consistent performance•

Lowopticalloss•

Lowpolarizationsensitivity•

Excellentmechanicalandenviron-•mental characteristics

Fast installation and commissioning•

CWDMupgradesinmetronetworks•

Increasethecapacitybetweenthe•central office and the headend in HFC networks

CWDMoverlayinPONarchitectures•

LAN•

Distribution Hubs/Cabinets

Modulardistributionplatformallows•for incremental deployment costs and immediate cost savings

SmallSizeisunobtrusiveinresidential•deployments

Enhancedfibermanagementprovides•simplified routing and termination of fiber pigtails

Dual-doorentryallowseasyaccessto•distribution and fiber management fields

Flexible pad and pole mounting options for •deployment in the most convenient location

AFL LightLink™ LL-400b FDH

ADC OmniReach® FDH3000UniqueDesigntoMeetDiverse•CustomerRequirements:“Engineer-ingFriendly”tosupportbothlowandhigh-density applications, different network system designs, and diverse installation environments

FlexibleandModular:Standardized•splitter modules and accessories for all FDH3000cabinets

Unique“swing-outframe”design•allows all fiber management to swing outside of the cabinet, allowing access to the back of the modules for repairs and maintenance.

ADC Hub in a Pedestal ModeledafterADC’sindustrylead-•ingFDH3000,theHubinaPedestalincorporates many of the same patented design features widely recognizedandacceptedbytechni-ciansincludingplug-and-play(PNP)splitter modules, parking lot storage and a swing frame to name a few

Rightsizedtomatchupwithphased•fiber deployment in smaller or rural communities

Pedestalsoffermoreflexibilityfor•installation locations compared to metal cabinets

Fieldfriendlydesign,craftInterface•is similar to existing cabinet style offerings

Reduced inventory by using same •splittermoduleaslargerFDHdesigns

Offersfullsizetraysforsplicing•incoming feeder and outgoing distribution cables

Option of adding hardened drop •connections directly from the ped-estal, further supporting lower cost business models

ADC Splitter ModulesQualifiedtoGR-1209andGR-1221•

Surroundedbysuperiorcableman-•agement, technicians need less time to route fiber in the cabinet, saving operating costs

Industry-leadinglowloss•

TerminatedwithGR-326certified•connectors

Rugged package protects delicate •splitters from installer handling

Variety of package styles allows •adaptation to many applications

Wideband performance allows op-•erationfrom1260nmto1650nm

Availableinconfigurationsfrom•1x4upto1x32,themodulescanbeordered in adapter port or pigtailed versions

AFL Future Access™ FDH-700

ADTRAN Total Access Retrofit KitsWith the demand for higher-•bandwidth services growing at a phenomenal rate, it is more important than ever to be able to leverage existing infrastructure in the delivery of new services

Retrofitting provides a complete •solution for next-generation deployment, while eliminating the costs associated with new cabinet fees, cabinet installation, powering, and right-of-way negotiation

Retrofittingminimizescapital•expenditures and speeds service deployment

Independentcablestrainreliefsystem•

Cable entry/exit grommet seals•

Compactsizelessobstructiveinresidential•deployments

Installedinoutdoorpedestalorindoor•building entrances

Preterminated fiber cable for distribution •and feeder

Directburiedapplication•


Charles Fiber Flexibility Pedestals (CFFP)Scalable,lowcostalternativeto•placingcentralizedsplitpoints(also known as fiber distribution hubs—FDH)intheoutsideplant

Compactsizecomparedtolarge•cabinets makes them easier to install and ideally suited to small communities and neighbor-hoods

Availableinfoursizeswithupto•72,96,144and288fibercounts

Sizesareconfigurablewith•smaller fiber counts to economi-callyoptimizefiberhubsizewithneighborhood

One splitter module fits alls CFFP •sizesfororderingandstockingease

Charles CFDP Interconnect Pedestals

Providepre-connectorized“in-•terconnectpanel”fiberdropstomultiple broadband service custom-ersatafractionofthecostofLightGuideCross-Connect(LGX)solutions

Idealformulti-tenantcellsite,•campus or strip mall environments wherethecustomerrequireshigh-capacity fiber bandwidth for wire-less backhaul, private networks or data and video broadband services

Weather-tight “enclosure within an •enclosure”architecturedesignedtoprovidefloodprotectionandexceedTelcordiaGR-771-COREenvironmen-tal protection standards

Availablein6”,8”,10”and12”diam-•eters with respective 8, 12, 18 and 24 bulkhead connector capacities

Clearfield FieldSmart Fiber Scalability CenterProvides an interconnect environ-•ment from the feeder network through the optical passive splitter to the distribution network in an FTTHPONOSPcabinetoracross-connectenvironmentofupto864ports.100%testedGR-326compliant•terminationsandGR-20,GR-409,GR-487,GR-1221andGR-1209compliant 12-fiber Clearview Cassette houses •each 12-fiber increment of patch only or patch & splice, protecting fiber from the environment and humanfactorsandallowsforquickvisual troubleshooting without opening cassetteRugged cable clamps protect •against twisting and pistoning of the critical breakout or buffer tube accesspointoftheOSPcablePatch only buffer tubes fully •protectedwithruggedizedbendlimiting tubing Snakeskinsleevingprovidesad-•ditional buffer tube slack storage protection and manageability for patch & splice configurations Smallsplitterpackageforminimal•spacerequirements,ruggedizedjacketing on input/output legs and bend insensitive fiber

Ground/locateboxoptional•Front access to pre-terminated as-•semblies with Clearview removable adapter plate Easytwocaptivefastenersforquick•removal of individual cassettes for trouble shooting, splicing, or hot swappability Front and rear access•Patch & splice configurations elimi-•nate costs associated with jacketed IFCcabling,handholes,andsplicecases

FTTx Solutions



Corning OptiTect® Indoor MDU Cabinet Features intuitive fiber management •andinternallayouttominimizetrainingandoptimizeinstallerproductivity

Factorypre-connectorizationandin-•stallationoffeederandrisercable(s),orsplicecapabilityensureaquickand reliable installation in the field

432Fibercapacity•

Splittermodulesinterchangeable•throughouttheGenIIISeriesaswellastheEclipseHardwareFamily

Features a swing out panel for rear •connector access

Integratedstoragedoorforparking•unused splitter module output connectors

Accommodates1x4,1x8and1x32•splitter configurations as well as dual1x4,dual1x8anddual1x16

Clear dust caps designed for easy •installation/removal and provide visual fault locating

Corning OptiTect® LS Series

Quick, easy fiber management •simplifies installation and subscriber connections

Distributionfibercountsof144,288,•432,576and864

Small-form,connectorizedsplitter•modules with simple, one-step park-ing – accommodating dual 1x8, dual 1x16,1x32and1x64configurations

Multiplepadandpolemountcon-•figurations provide operator with maximumdeploymentflexibility

Uniquegroundingsystemprovides•a single point outside the cabinet to isolate and tone cables in the cabinet

Provides multiple distribution and •feeder cable entries

Pass-through panels enable feeder •fibers to bypass splitters for com-mercial services or high-bandwidth applications

Corning OptiTect® Gen III Series Industryleadingcabinetsize•

Fully factory stubbed•

Connectorizedfeederanddistri-•bution fibers to coupler/splitter modules

Splittermodulesinterchangeable•throughouttheGenIIISeriesaswellastheEclipseHardwareFamily

User-friendly design and intui-•tivefibermanagementminimizefield training, installation time and overall labor costs

Increasedspeedofdeployment•

Pad or pole mount options with up •to432fibercapacity

Clear dust caps designed for easy •installation/removal and provide visual fault locating

RDUPListed•


Preformed Line ProductsCOYOTE® Axcess Solutions™

AvailableSizes:rackandwall•mount designs supporting up to 144 connections

Higher capacity designs available •uponrequest

Designedforinterioruse•

Powder coated metal construction •is built for demanding environ-ments

Color-codedpigtailsinunique•sleeve provide easy fiber identifica-tion, fiber adjustment and storage

Wide range of connector types •available

Tyco CSX-3

CSX-3cabinetsaredesignedfor•maximumapplicationflexibilitybycombining the features of a central-izedsplittercabinetwiththoseofafiber cross-connect cabinet.

Cabinets are available in a range •ofsizesandconfigurations.432and864cabinetscanbeorderedpartially loaded with distribution panels.

Modularstubbedshelfassemblies•are easily added in the field to expand for future network growth capacity.

The optional fiber splice basket •allows for splicing of all fibers in the cabinet.

Pass-through modules may be •placed alongside splitter modules andallowforanorganizedmethodof connecting feeder to distribution ports and bypassing splitters.

Splittermodulesincorporateone•pigtail length and fit all cabinet sizes.

Splitterpigtailroutingissimple,•intuitive, and consistent across all threecabinetsizes.

Cabinet outer shells and kick-plates •are field replaceable.

Centralized Splitter and Cross-Connect Cabinets

Emerson NetSpan FDH Compact Series

Provides connections for fiber optic •cables and passive optical splitters in FTTx applications

IdealasaLocalConvergencePoint•(LCP)foraggregationinacentral-izedsplittingPassiveOpticalNet-work(PON)FTTxarchitecture\

FDHclosureallowsforflexible•mountingoptions:pedestal(floodproof ),pad,pole,vaultorwall(in-doororoutdoor)

Lowerdeploymentcostbynot•having a separate closure/cabinet to splicetheFDHcables

Accommodateshigh-density,high•performance1x32,1x16,1x8,2x32&2x16modularopticalGR1221-1209PLCsplitters

Splittermoduleshavepre-parked•jumpers

Availablein72,96&144fiberdistri-•bution configurations

Complete fiber management with •radius limiting spools

GR326complianttermination•

Emerson NetSpan FDH Hub SeriesSeriesofcorrosion-resistantenclo-•sures that provides connections for fiber optic cables and passive opti-cal splitters in FTTx applications

DesignedtoTelcordiaGR-3125-•COREspecifications,theenclosuresalso provide environmental and mechanical protection for cables and optical components

IdealasaLocalConvergencePoint•(LCP)foraggregationinacentral-izedsplittingPassiveOpticalNet-work(PON)FTTxarchitecture

Heavy-gauge aluminum •welded construction with pow-der coat finish

Accommodateshigh-density,•highperformance1x32modularoptical splitters

Splittermoduleshavepre-•parked pigtails

Availablein144,288,432&576•fiber distribution configurations

Complete fiber management with •radius limiting spools

Pre-terminated fiber stub or in-•cabinet splicing configuration

FDHcabinetconfiguredemptyor•preloaded with splitter modules

Splice Closures / Network Access Points

3M Fiber Optic Splice Closure 2178

One-piece construction for easy •installation and permits access to the cable splice without removing the terminal closure body.

Separatespliceanddroptermina-•tion chambers allows easy and se-cure access for service connections and drop maintenance without having to enter the splice chamber.

Craft-friendly drop entry system •permitsquickandeasyplugandplay drop installation with minimal training.

Optional lightweight, easy to install •splicing workstation provides a stable work surface that secures the fusion splicer and cleaver. This helps to simplify the installation and splic-ing process when splicing on the strand or lift truck.

Double-walledmoldedconstruction•provides durable protection from bending and cracking in the most extreme environments.

Limitednumberofcomponents•needed to install the terminal clo-sure, thus decreasing the installation time.

Accommodatesin-line,butt,and•taut-sheathapplications.Allowsforupto96singlefusionor288massfusion branch splicing.

Slackstoragebasketprovides•separate area for routing, protecting, and“expressing”buffertubesandribbon fibers.

Nospecialtoolsrequired.Easy•installation and re-entry.

Interlockingendspermittheclosure•chamber to be extended to protect damaged sheath or accommodate larger openings for taut sheath ap-plications.

3M™ Fiber Optic Splice Closure 2178-XSB

Constructed of a highly chemical-•resistant material. Can be deployed in underground and aerial environ-ments.

Gasketsealforeasyre-entryand•reusable seal.

Uniquestrengthmemberclamp•assembly designed to prevent cable sheath movement with temperature changes.

Compactsizeeasilyfitsintomost•pedestals and handholes.

Spaciousfibermanagementareain•bottom half of the closure provides separate area for routing, protecting, and“expressing”buffertubesandribbon fibers.

Flexible drop or cable addition. •Multiportgrommetprovidesentryforupto6dropsorsmalldiametercables


Pressurizationvalveprovidesability•toflashtest.

Availableinflameretardantmaterial•that can be deployed in vault and building applications.

3M™ Fiber Dome Terminal Closures

Compactsizefitsintosmallpedes-•tals and handholes.

Constructed of highly chemical-•resistant material and can be de-ployed in all environments: buried, underground, and aerial.

Nospecialtoolsrequired.Simple•installation and re-entry.

Fixed O-ring seal for easy, error-free •closure sealing and re-entry.

Innovativelatchingmechanism•provides simple re-entry into closure by lifting the dome lid away from the base.

3M SLiC™

One-piece construction for easy •installation and permits access to the cable splice without removing the terminal closure body.

Separatespliceanddroptermina-•tion chambers allows easy and secure access for service con-nections and drop maintenance without having to enter the splice chamber.

Craft-friendly drop entry system •permitsquickandeasyplugandplay drop installation with mini-mal training.

Optional lightweight, easy to in-•stall splicing workstation provides a stable work surface that secures the fusion splicer and cleaver. This helps to simplify the installation and splicing process when splic-ing on the strand or lift truck.

Double-walledmoldedconstruc-•tion provides durable protection from bending and cracking in the most extreme environments.

Limitednumberofcomponents•needed to install the terminal closure, thus decreasing the instal-lation time.

Accommodatesin-line,butt,and•taut-sheathapplications.Allowsforupto96singlefusionor288mass fusion branch splicing.

Slackstoragebasketprovides•separate area for routing, protect-ing,and“expressing”buffertubesand ribbon fibers.


Interlockingendspermitthe•closure chamber to be extended to protect damaged sheath or accommodate larger openings for taut sheath applications.


ADC OmniReach AT 300 Access Terminal

IntelligentDesign—smartcable•managementsystemmaximizesperformance, prevents damage and allows for future growth.Practical—Matchesopticalnodeter-•minaldeploymenttoservicerequest.Future-Proof—Supportsefficient•service deployment, management and technology upgrades.Flexible—provides for a wide num-•ber of service applications

Robust environmental performance: •Withstands extremes in temperature and conditionsTechnician-friendly features: •Intuitivedesignforeaseofuse

Decreasedinstallationandincre-•mentalmaintenancehours:Signifi-cant savingsProtection:Self-containedunit•features hardened connectors for superior durability and reliability in the drop segment of the networkFactory-terminated and environ-•mentally sealed for use in drop cable deployments in optical access networksCompatibility:Interoperability•with industry standard hardened connectors

AFL Aerial Weathertight

TheAFLTelecommunications’familyofAerialWeathertightSpliceClosuresis designed to provide a cost-effective solution for your aerial splicing needs. Quality engineering reduces the installation time, training and com-plexity associated with fiber splicing in the field. The closures have all been designed to be installed without the need for special tools, heat, adhesives, drills,oranypoweredequipment.Durableandeasytoinstall,theseclosures will improve productivity, reduce labor expenses and last the life of the plant.

Individual,patented,self-sizing•cable grommets and strength member tie downs provide for cable additions without disturbing those previously installed

Uniquetongue-in-grooveclosure•seal and back-to-back grommet design provides for a weathertight and insect seal

Closures are re-enterable without •the need for any re-entry kits, special tools or sealants

DesignedandtestedtoTelcordiaTM•GR-771aerialweathertightclosurerequirements

RuralUtilitiesService(RUS)Listed•

AFL Fiber Storage Unit

Smallprofileandasidefacingchan-•neltominimizeiceloadAllaluminumconstructionwith•welded cross members

Baked acrylic enamel finish/chro-•matepre-finishperMIL-C-5541-BContains 2% carbon black as a UV •inhibitor(dielectricversion)Basic hardware (bolts, nuts and •washers)andstrandmountsupportbrackets included Tie-wrap slots for securing cable •from sliding Strandmountsupportbrackets•meet Telcordia specification and are REAacceptedGalvanizedstrandclampingdevices•accommodate1/4”to7/16”strandReserveCableStorage

AFL Sealed Splice Closures

TheAFLTelecommunications’familyofSealedFiberOpticSpliceClosures is designed to simplify splice management. Quality engineering reduces the installation time, training and complexity associated with fiber splicinginthefield.Noheat,adhe-sives,drillsorpoweredequipmentforinstallationorre-entryarerequired.These durable, easy to install closures will increase productivity, reduce labor expenses and last the life of your plant.

Supportsstrandedloosetube,Uni-•flex®orribbonfibercablesineitherarmored or dielectric configurations

Installationandre-entryusingcom-•mon hand tools

Fully sealed to protect fiber and •splices ensuring longevity

Fully kitted with all parts to install •cables

DesignedandtestedtoTelcordiaTM•GR-771requirements

RuralUtilitiesService(RUS)Listed•

ADC Multiport Service Terminal (MST)


Corning OptiSheath® Aerial Terminal

Low-costsolutionoptimizedfor•optical access architectures

Innovativeterminalsprovide•environmental protection and quickincrementalconnectionofsubscribers’ drop cable

Provides strain relief, sealing •ofallcablesandquick-releaseclamps for easy terminal re-entry

Cable sealing and reusable •gel seals for environmental protection

Terminals provide an excellent •option for emergency restora-tion

RDUPlisted•

Corning OptiSheath® MultiPort TerminalReliabilityandflexibilitymakeit•theidealchoiceforNAPtermi-nals in FTTH deployments

OptiTap®dropcableassembly•connector ports for faster cus-tomer connections4 and 12 port designs sup-•plied with universal mounting bracket6and8portdesignswithinte-•grated mounting capability

Ultrasonically welded hous-•ing – eliminates water ingress potential4,6and8portconfigurations•compatible with 8 in stand height pedestalDimensionsoptimizedtofit•in a variety of commercially-available handholesFactory directly-terminated •polished connectorsStubbedterminalprovidesthe•ability to consolidate cable access points by routing several terminal stubs to a single splice locationRDUPlisted•

Corning FlexNAP™ Terminal Distribution

Significantlyfasterdeployments•than traditional field installa-tionsCable and network access •points are tested and shipped as a complete distribution cable/terminal systemCompatible with both aerial and •below-ground outside plant distribution applications

Factory terminated and tested •with factory installed sealed access pointsPatented,flexible,preterminated•access point terminal allows the complete cable system to conformtodrumsizeofmoststandard cable reelsRental capabilities offered as •well as engineering services available to plan, design order and supervise installationUp to two tethers available per •tappoint(24fibers)


Preformed Line Products COYOTE® Dome Closures

AvailableSizes:•

9.5”x28”(240mmx711mm) »6.5”x22”(165mmx559mm) »6.5”x17”(165mmx432mm) »Designedforbelowgrade,aerialor•direct buried applications

Patented segmented end plate •design allows independent access to each cable port

9.5”Endplatecontains7portseach•accepting1.25”maxcablediameter(31.7mm)

6.5”Endplatecontains4portseach•

accepting1.25”maxcablediameter•(31.7mm)

Endplatesystemcansupportmul-•tiple express loops

Features the latest easy to use grom-•met sealing technology

Collarsystemprovidesquickreentry.•

Nospecialtoolsrequired•

IndependentlytestedtotheTelcor-•diaGR-771COREspecification

Segmentedendplatesystemcan•also function within closure shells to create inline designs

Full line of pole, wall, strand and •below grade mounting brackets available

Consult detailed product literature •for splice capacities

Preformed Line Products COYOTE® Classic In-Line RUNT Closures

Dimensions:17.5”x10”x3.5”•(440mmx250mmx90mm)

Designedforbelowgrade,aerialor•direct buried applications

Can support splice capacities up •to:80(singlefusion)or288(massfusion)

Cableentranceportquantity-4,•each accepting max cable diameter of1.25”(31.7mm)


Nospecialtoolsortorquewrenches•requiredforassembly

Flame retardant designs also avail-•able

Compactsizeandflatbasepermit•installation in small areas


Acceptsafulllineofsplicetrays•includingtheLITE-GRIP®SpliceTraysystem

IndependentlytestedtotheTelcor-•diaGR-771COREspecification


Preformed Line Products COYOTE® MPC (Multi-Purpose Closure)

AvailableSizes:•

Standard-16”Lx14”Wx4”D »(406mmx360mmx100mm)

Deep-16”Lx14”Wx7”D »(406mmx360mmx178mm)

Designedforabovegradeexterior•or interior use

Eightcableentranceportsaround•closure exterior

CableentranceportsacceptPLP•grommet system or commercial fittings

Singleholeandmulti-holegrom-•mets available

Constructedfromflameretardant•UV resistant polymers

Interiorgridholepatternallows•customorganizationtoaddressyourspecific needs

Designsavailablewithinternal•bulkheads to support splice/patch applications

Integratedrubbersealprovides•NEMA4performanceagainstwaterand dust entry

Fulllineofaccessoriestoorganize•interior

Customplaquesavailabletoidentify•your company logo


Preformed Line Products COYOTE® LCC Closures

CompactSize:17”x7”x2.5”•(432mmx178mmx64mm)

Designedforbelowgrade,aerialor•direct buried applications

Cableentranceportquantity–2,•each accepting max cable diameter of1.25”(31.7mm)

Can support splice capacities up to: •24 single fusion, 72 mass fusion


Nospecialtoolsortorquewrenches•requiredforassembly

FeaturesaLITE-GRIP®SplicePlat-•form that can support mechanical connectors,PLCsplittermodules,single fusion or mass fusion splices

Compactsizeandflatbasepermit•installation in small areas


IndependentlytestedtoBellcore•specifications


Tyco FOSC 450 Fiber Optic Gel Splice Closures

FOSC450fiberopticspliceclosuresare a family of butt-style closures designed for use most anywhere there are fiber splicing and storage needs. These closures are available in fivesizes(450A,B,BShort,C,D),eachfeaturing:

Re-usable compressed gel cable •sealing components that accommo-dateawiderangeofcablesizes.

Hinging splicing trays that provide •controlled access to splices and slack storage.

Spliceandstoragecompartments•accessible via a removable dome-clamp system.

Thermoplastic outer materials that •withstand temperature and con-taminate extremes.

Slackstoragebasketsofvarious•sizesthatprovidedifferentslackstorage scenarios.

Arangeofaccessoriesforavariety•of outside plant needs.

Manysharedcomponentsbetween•closuresizes.

Tyco FOSC 500 AA Slim In-Line Closure

FOSC500AAin-lineclosuresareen-vironmentally sealed enclosures for aerial, underground, or direct buried applications in the outside plant network where space is limited

Compact in-line design•

Easyre-entryandre-closure•mechanism with hinge and latches

Two cable ports at each end of the •closure implement cold-applied gel cable sealing system

Integratedcablejacketgripping•devices

Compatible with most existing •cable constructions

Superiorfibermanagement•

Tyco FOSC 600 Fiber Optic Splice Closure

TheFOSC600CandDclosuresaremore than just fiber optic splice closures. They are rugged and versa-tile platforms that can be deployed anywhere in the outside plant for a multitude of functions including the splicingofmostanytypeandsizeofcable,thehousingofconnectorizeddistribution and demarcation points, and the deployment of optical pas-sives.ThesealingsystemforFOSC600closuresbuildsontheprovenreliabilityofFOSC400andFOSC450

closures and features the versatile and popular gel-sealing technology forterminatingcables,andauniquelatchingsystemforquicklyopeningand closing the body.

Upto16separatecableports•

Sizedforcablesupto35mmin•diameter and 1728 fibers

Field configurable for butt or in-line •splicing

Allinternalpartscanberemovedfor•reconfiguration

BothCandDclosuresuseTyco•Electronics’“D”sizesplicetrays

Storagebasketincludedwithall•closures can be extended in length or repositioned vertically depending on application

Slackribbonstorageonthesame•tray as mass fusion splices is pos-sible with the use of a ribbon tray

BackedbyTycoElectronics’ex-•tensive network of technical field support specialists

FTTx Solutions


Pedestals / Enclosures

AFL LightLink™ LL-400b

• LL-400bFiberOpticSplicingandDistributionEnclosureprovidesfororganizing,splicing,andintercon-necting fibers in FTTx, broadband, distribution, and building entrance applications

Features a scratch resistant powder •coated aluminum base and a fully gasketed cover

Uniqueself-sizinggrommetdesign•allows for express and pretermi-nated cable installation

Equippedwith6independent•cable entry/exit grommets, used for outdoor pedestal or indoor building entrance and riser splicing applica-tions

Independentcablestrainrelief•system

Cable entry/exit grommet seals•

Fiber routing system•

Splicetraysupportsystem•

Supportsoptionalinterconnect•modules

240 single fusion splices•

288 mass fusion splices•

AFL LightLink™ LL-500-DS

TestedtoTelcordiaGR-771•

NEMA3ratedenclosure•

Independentcablestrain-relief•forflatdropcablesaswellas 2mmand3mmdrops

Uniqueself-sealinggrommet •entry system

Self-containedinnerchassisframe•with separable outer housing

Dualtelcocan-wrenchlocking•fasteners

Hinged cover securable with •standard padlock

Includedsplicetray,(4)SC/APC•adapters,(4)SC/APC2mmpigtails

TheFieldSmartFDPSpliceOnlyPedestalInserts•provides splice or interconnect connectivity at the access point for the last mile drop.RUSlisted•Strength,rigidityandsecurityallinahigh-per-•

formance thermo-plastic material designed to Tel-cordiaGR-13CoreandRUSPE-91specificationsSinglepointself-lockingandremovablecover•

provides secure pedestal locking and eased craft accessOpenarchitectureandflood-proofmodels•“Stake-less”self-supportingbaseeliminatesthe•

need for supplemental mounting stakesSplit/rehabbaseallowsforeasierplacement•

over existing cable or pedestal expansionEasylift-offdomefor360°accesspermitscom-•pleteaccesstoallwireworkandequipment

Upto16splicetrayswithClearfieldregularDropCableAssemblyor•industry-standard HFOCPre-configured/pre-loaded factory terminated assemblies•Patch only or patch & splice configurations supported •Integratesdistributionsplices,splittersandslackcableforacost-•effectiveflexibleoptionoranyFTTPdeploymentCan wrench fasteners•

Clearfield FieldSmart (FDP) 96-Port PONTheFieldSmartFiberDeliveryPoint(FDP)96-PortPONPedestalInsert•Kitprovidesspliceorinterconnectconnectivityattheaccesspointforthe last mile drop.

RUSlisted•

Strength,rigidityandsecurityallinahigh-•performance thermo-plastic material designed to TelcordiaGR-13CoreandRUSPE-91specifications

Removable metal cover•

LowcostentrywithRUSlistedpedestals•

1-8splicetrayswithClearfieldregularDropCable•Assemblyorindustry-standardHFOC

Pre-configured/pre-loaded factory terminated •assemblies

Patch only or patch & splice configurations •supported

Integratesdistributionsplices,splittersandslackcablefora •cost-effectiveflexibleoptionoranyFTTPdeployment

This insert will work in all three of these pedestals: •Proform12,Channell,BD7

Utilizescosteffective•

Clearfield FieldSmart (FDP) Splice Only


Charles Fiber Distribution Pedestals

Closed architecture fiber distribu-•tion pedestals with two-stage “en-closurewithinanenclosuredesign”thatexceedsTelcordiaGR-771-COREspecifications

Innersealedsplicingcompartment•is accessible through either a lift-off dome or double door enclosure

Accommodateloop-throughand•stub-out distribution cable, ribbon and loose buffer tube type cable, branch and drop splices, and fiber slack storage

Non-metallicconstructionandlock-•ingdomeprovidesuperior,flood-proof environmental protection

Availablein4”,6”,8”,10”and12”ped-•estal diameters

Charles Buried Distribution Optical Pedestals

Open architecture fiber distribution •pedestalsforbothGreenfieldandBrownfield fiber deployments

Provide easy access to branch and •drop splice while protecting and storing loose buffer tube cables

ExclusiveBDObracketallowstechni-•cians to mount splice trays and

splitters securely with ample access to perform in-field splicing

Non-metallicconstructionandlock-•ingdomeprovidesuperior,flood-proof environmental protection

Availablein6”,8”,and10”diameters•

Charles Universal Broadband EnclosuresCompact, lightweight metal •cabinets for housing a variety of electronicsinOSPplacements

Applicationsincludecellsiteback-•haul,MDUPONONTs,andremoteDSLAMs

Pre-wired to meet your power, •protection, and physical interface requirements

Swingoutdoororrackmount•configurations for mounting optical multiplexers and other electronic equipment

Availableinmanycustomizedsizes•and configurations

Clearfield FieldSmart (FDP) Outdoor/IndoorAvailableapplications:Fiberdemarcation,entrance•facilities,securitysystems(CCTV),MDU(Multi-dwellingUnits)applications

Pre-configured/pre-loaded factory terminated as-•semblies

Patch only or patch & splice configurations supported •

Panel can be configured as a tie panel and later converted to a patch only •orapatch&splicepanel,utilizingClearfield’sClearviewCassette

Removable doors and non-angled connectors enable fast, easy fiber •jumper routing, reducing the risk of fiber damage when cleaning or patching fibers

The product is shipped and loaded with the industry standard adapter of •your choice

Supportsallindustrystandardsinglemodeandmultimodeconnectors•

100%performancetestedforInsertionLoss,ReturnLossandmechanical•inspect

100%testedGR-326compliantterminations,andGR-20andGR-409•compliant

Radiusprotectedstorageforuptothreemeters(foroutdoor)orfiveme-•ters(forindoormodels)ofjacketedfiberorpatchcordslackisprovided(patchside)

Integratedfibermanagementprotectsfiberfrommicro-bendandmacro-•bend damage

Accessibleusingastandardcanwrench•


Emerson ProFORM FTTP Vault Series

Emerson ProFORM FTTP FDP MI SeriesProvides fiber distribution on a center mounted metal insert•

Designedforslackstorage,fibersplicinganddropsinburied•distribution FTTH applications

Metalfibermountingplateaccommodatesslackstorageon•one side and splicing on the other

Radius limiting spools improve fiber management and reduce •chance of signal loss

Accommodatesupto12feetof144loosetubefiberandupto•6splicetrays(12”Hx4.5”W)

Pro8,Pro10andPro12sizesavailable•

Lift-offdomefor360°accesspermitscompleteaccesstoall•wireworkandequipment

MeetsorexceedsTelcordiaGR-13COREandRDUPPE-91•specifications

AcceptedbytheRuralDevelopmentUtilitiesProgram(RDUP)•

Mountstothetopofapre-cast•vault

Three mounting bracket options •are available: the Universal Rear-mountingBracket(URB)isusedforoptical terminal block mounting; the fiber distribution mounting plate(FDPMI)isdesignedforslackstorage, splicing and drops; and the plastic center mounting plate is used for copper distribution and wire management similar to the standardProFORMseries

Easilyboltstothetopofapre-cast•vault with the approved cutout

Universal Rear-mounting Bracket •(URB)accommodatesisusedforoptical terminal block mounting

FDPMImountingplateisdesigned•for slack storage, splicing and drops

Aplasticcentermountingplateis•used for copper distribution and wire management

Seamlessintegralfloodprotection•

MeetsorexceedsTelcordiaGR-13•COREandRDUPPE-91specifica-tions

AcceptedbytheRuralDevelop-•mentUtilitiesProgram(RDUP)

Emerson NetSpan FDP SeriesThis series of optical splice •enclosures permits fiber splicing, improvescableorganizationandhouses environmentally hardened drop connections in FTTP applica-tions

CombinesOpticalSpliceand•EnvironmentallyHardenedDropClosures

Uniqueinternalback-to-backdual•closure configuration enables craft separation; fiber splice and drops in separate closures

Eliminatesneedforhandhole/•vault for drop splices

SinglepartnumberforIntegrated•DistributionTerminalandPro-FORM®pedestalsolution

DesignedtofitinProFORM®8&10•pedestals

Drop Cable

Single-fiber,single-modehardened•connectorSC/APCdropcableas-semblies

Availablewithoneorbothends•connectorized

Standardlengthsavailable-from•60to2500ftincrements(longeras-sembliesavailableuponrequest)

Environmentallysealedconnector•

Easyconnectiontohardened•adapters on terminals or closures

Arrowonhardenedconnectorshell•ensures precise alignments of con-nector into optical port

Connector can be pulled through •1.25-inch conduit

Pulling eye on connector cap is •designed for 100 lb. maximum pull-ing tension

DropcablefullytestedtoGR-20•anddesignedtoGR-3120

ADC Hardened Connectors and Drop Cables

FutureAccess™4-FiberHFOCDrop•CableisusedinMDUapplicationwhere FTTP services are to be pro-visioned using indoor single family unit(SFU)ONTAllowsquickandeasyinstallation•from the preinstalled HFOC terminal usually residing on a pole, pedestal or hand-hole run to the side of the MDUbuildingFour environmentally sealed •SC/APCconnectorsEachconnectormarkedforfiber•identificationandequippedwithprotective capFully sealed transition fan-out into •individual48”longsinglefiberHFOCtethers

TestedtoTelcordiaGR-3120and•GR-771requirementsAvailableindielectricortoneable•flatdropcableAvailablein200or500footlengths•

AFL Future Access™

Ceramicferruleutilizedforpreci-•sion fiber alignmentRibbedbootdesignonSCinsures•protected cable bendingMeetsconnectorinterfacespecifi-•cationsofEIA.TIA-455(FOCIS)

Allcomponentmaterialsare •complianttoUL94V-0Tested in accordance with Telcor-•diaGR-326,issue3specificationsFujikura fiber enables tight bend •radius control and low lossCableconstructionsareRoHS•compliantCable constructions meet or •exceedTelcordiaGR-409Color-codedIvorycablejacket•identifies enhanced performance

Used to speed residential con-•nection in Fiber-To-The-Premises (FTTP)cablingnetworksSmalleradapter enables smaller closure and smaller multiport terminal, takes up less space on poles, in handholesandinanONT.Smallerconnectordropsfitin•smallerconduit,requiressmallerhole in dwelling, less intrusive entry into the residence, easier and more secure connection.ADC’sfullsizedhardenedadapter•converter is backward compatible withtheOptiTap®connectorsys-tem,usingDLXconnnectortofullsizedhardenedadapterconverter.

SC/APCconverterisbackward•compatiblewithSCconnectorsandadapters,usingDLXconnec-tortoSCadapterconverter.AllowsflexibilityinMDUcabling,reducestime and cost for connecting residential fiber.Variety of cable options allow •cablingchoicetobeoptimizedforoutdoor aerial or underground ap-plications, or for indoor/outdoor applications

ADC DLX™ Fiber Optic Connector

AFL Aerial Drop CableDesignedforusewithinexpensive•attachment hardware

Compatible with standard splice closures •

Self-supporting-nomessengerneeded•

Smallcrosssectionformaximumdensity•in closures and conduit

Ideallysuitedforself-supportingdrop-•type installations as well as in lashed or conduit builds

6and12fiberdesigns•

AFL Bend-Insensitive MDU

GR-20certifieddielectric,single•fiberflatdropcablewithdualstrength member.For locating purposes, a tonable •drop cable is available.

Availablewithothertypesof•connectors(LC,ST,FC).AvailablewithSC/APCorGR-326•connectors.One end or both ends of the drop •cable is factory prepared.Availableinlengthsfrom50’(15•m)to1000’(305m).Minimumconduitdiameter:•3.175cm(1.25in.).

3M™ (ECAM) FD Factory Terminated Drop

Drop Cable

Quick and easy deployments with •increased reliability allow for fast service turn-up, improved network reach and lower overall network operating and maintenance costs

Bend radius as small as 7.5 mm •without changing cable character-istics allows stapling around tight corners without compromising insertion loss performance

Greatlyreducesrisktobendin-•duced insertion loss created during installation

Indoor/Outdoor,PlenumandRiser•cable options available

Rugged3mmcablejacketcon-•struction

G.657TableAandBcompliant•

Two cable configurations available: •connectors on both ends or con-nector on one end

Spoolingoptions:endwithcon-•nector pulled first or end without connector pulled first

Ivorycablecolorhelpsdistinguish•cable in the field

ADC RealFlex™ MDU Drop Cables

Uniquedesignreducesthetotal•installed cost of drop cable deploy-mentSingle-fiber,single-modeSCAPCor•SCUPCdropcableassemblies

Availablewithoneorbothends•connectorizedSST-Drop™cableavailableinboth•dielectric or toneable configura-tionsCable design for aerial, direct-buried •or duct installationStandardlengthsavailablein15ft•incrementsfrom90to180ftandin50 ft increments above 200 ftRobust design keeps connector •intact during installationCan be pulled through 1.25 in •conduitRDUPlisted•

Corning OptiTap®

Innovativetubelesscabledesign•minimizesbothsizeandweightAvailableinbothdielectricand•toneable variationsRetains industry standard hard-•ware compatibility such as wedge clampsImproveseaseofhandlingand•installation Reduces transportation and stor-•age costsAvailableinpreconnectorized•assembliesOptimizedforbothfieldandfac-•tory termination processes

Corning ROC™

All-Purpose FTTx Drop CableFlat design and small diameter; •All-dielectricEasysealinclosures•Idealforbothaerialandburied•applications Maximumflexibilityforfactorytermi-•nation and plug-n-play systemsEliminatescostandneedofspecial•toolsEasycableentry•

All Purpose Locatable FTTx Drop CableEliminationofgroundingprocess•Copper strand for locatable function•Zip cord design for easy hand-peeling of metallic locator•Facilitates both increased savings and improved efficiency when •used as a low fiber count distribution cable and as final drop to the premisesIdealforaerialapplicationswhenentirelocatorisremoved•All-dielectriccore•

Armored DropLowCost•Corrugated steel armor for added protection•Highflexibilityduetoabsenceofstrengthrods•Smalldiametermaximizesductspaceformorefiberdensity•Easyaccessdesigneliminatesneedandcostforspecialtools•

Ribbon Drop

First FTTx ribbon drop cable in the industry•Sumitomo’sEasy-Peel™(Hand-PeelableRibbonTechnology)•Fastinstallation,MassSplicing•Clean,Gel-free,DryDesign•Compatiblewithhardened,multi-fiberconnections(MFCs)•Idealforterminaltetherandbothaerialandburiedapplications•Smalldiametermaximizesductspace•Availableinstandardribbonor3x4modularribbonconfigura-•tionthatfacilitatesquickdeploymentandmasssplicingof4-fiberbranching topologiesComplimentsType-25eMmasssplicerforfaster,lowercost,and•more efficient FTTx deployments

Sumitomo PureFit™

Superior Essex ADP FTTP Series 57

Addsastandardfibercomponenttoaprovenself•support aerial drop product offering combinations upto12fibersand2-22AWGtwistedpairsOfferstheflexibilityoftwistedpaircopperfor•communications or power with the future proofing capabilities of optical fiberCompletely water-blocked using dry technology to •reduce weight and increase user friendlinessUses standard off the shelf self support hardware •and well-known industry accepted installation practices

Hardened Gateways & CPE

AFL LightLink™ Customer Premise System

Fits comfortably into new and exist-•ing interconnect, cross-connect and co-location environments

Optional splice tray and holder •(orderedseparately)

Availableempty,withadapters,•or with adapters, splice trays and pigtails preinstalled

Various connector styles and types •available

LGX®compatible(LGX®118)•

Modulardesign•

Provides maximum protection of •sensitive components

Dualdoorswithseparatelocking•optionsforflexibilityandsecurity

Optional5-positionKeystone®•adapter panel for use with copper interconnects

Co-Location/CustomerPremise•

Remote Terminals •

Hubs/OTNsites•

Telecommunication Closets •

Solidsteelconstruction•

Central office white or black powder •coat

Top or bottom cable entry with dust •resistant grommets

Physicaldimensions:9.4”Hx15.0”W•x3.3”DCPS012showninwhite

AFL LightLink™ Optical Demarcation Closure

TheOptiNIDOPN-500isanopticaldemarcation closure designed for use in either indoor or outdoor environ-ments.SmallertosuitFTTHdemar-cation applications and versatile to suit Cat5 or coax connections, the closure is capable of housing up to six bulkheadadaptersinone118LGX®compatibleadapterplate.Equippedwith an integrated splice tray, which holds up to six single fusion splices, theOPN-500canbeeitherwallorpole-mounted for ease of use and accessibility.

Weather-resistant thermoplastic •alloy

Self-latching,hingedcoverdesign•allows easy access without loose parts

Self-sealingindividualentrance•ports prevent water and insects from entering

Capacityforone118LGXcompat-•ible adapter plate

Keystoneadapterplateavailable•

Provider override for customer lock •

1/2”or3/4”NPTconduitfitting,•compression cable fittings or grom-meted entry ports

Locationsavailableonfrontcover•for custom logos

ADC OmniReach® Rapid Distribution Terminal

Servesasthefinaldistributionpoint•betweentheIFDHandlivingunit

Eliminatestheneedforsplicecases•and separate cable assemblies

Reduces overall lead-time and •installation process

InnovativeRapidReel™technology•enablesquickpayoffofupto500feetofMTstubbed12or24countopticalfibercablefromasingle6”x9”wallbox

Providesflexibilityindeployment•withvarioussizeterminals,cabletypes and standard cable lengths

Use of factory terminated and tested •MTconnectorsinsteadofsplicingprovide a plug and play environ-ment that reduces labor costs and speeds project completion

UtilizesReducedBendRadiusFiber•

Miniaturizedcablerequiresless•space for slack storage of excess fiber cable

Simplifiesorderingandinventory•

ADC OmniReach FDH 3000i series cabinets

Designedtoorganizeandadminister•fiber optic cables and passive optical splitters in an inside plant environ-menttypicallyfoundattheMDU

Provides a vital cross-connect inter-•face for optical transmission signals attheMDU

Integratedsplicetrayoffersflexible•splice management for individual or mass splicing

Sealedcabinetsprotectfibersfrom•dust, water spray, insects and other contaminants

Accommodateshigh-densitypre-•terminated configurations, typically 72,144,288,or432fibers

Accommodateshigh-densitymodu-•larsplitteroptions,1x16,1x32,dual1x8, dual 1x4

Traditional swing frame design •allows for superior rear access

TestedtoNEMA-12andGR-3123•

Complete fiber management allows •forflexiblere-arrangement

Cable management and routing lim-•its bend radius and adds strain relief

Rack, wall or pad mountable •

Bend insensitive fiber on splitter •outputs

True plug-and-play splitter technol-•ogy

216-Tool(canwrench),keylock•orpadlockoffersflexiblesecurityoptions


Voice:

TDMvoicewith•IntegratedGR303/TR008

SIPVoIP•

Video:

IPTVandIGMP•multicast

870MhzRFoverlay•withIntegratedMOTorolaReturnPathDemodulator(MOT-RPD)

Data:

10/100/1000bT •interfaces

VDSL2,HPNAop-•tions

ADTRAN Total Access 1100 Series

TotalAccess1100Seriesbroadband•access systems represent an in-novative approach to the successful deployment of universal broad-bandandfibertothenode(FTTN)architectures

Standalone,weatherproofbroad-•band access systems to eliminate the need for expensive cabinet enclosures, heat exchangers and site construction, which account for a large portion of the total cost of deployment

Dependingonthedensity,1100•Seriessolutionscandeliverservicesfor 50 to 75 percent less than tradi-tionalcabinet-basedDSLAMs,whiledramatically reducing the initial circuit costs

TotalAccess1100Fisanenvi-•ronmentally-hardenedEthernetaggregation unit that serves up to fourTotalAccess1148OSPDSLAMsorTotalAccess1248Mini-DSLAMs,logically combining them into a single,high-bandwidthEthernet/IPDSLAM

Provides the high bandwidth •uplinks,Ethernetaggregationfunctions, fiber and copper system interconnects, and video enabling functionslikeInternetGroupMan-agementProtocol(IGMP)proxyformulticast replication

Motorola GPON ONT

3M™ Cable Transition Box FTB-M (CTB)

Compactsize,discretedesign•respects building aesthetics, works well in tight spaces.Rubber gasket along interior edge •and at drop cable entry ports keeps moisture from penetrating enclosure.Wellorganizedfibercoilingarea•maintains appropriate fiber bend radius.Terminates up to four fibers with •3M™NoPolishConnectors(orstandardSCconnectors),alsoac-commodatesfour3M™Fibrlok™SpliceSleeveHolders.Suitableforcustomers interested in operational efficiencies and lower labor costs of mechanical splicing and field termi-nations, as well as those who opt for use of preterminated drop cables.

Cable anchoring device ensures ap-•propriate fiber bend radius as cables transition from enclosure through building wall.

3M™ Compact FiberDistribution Box PBO T1

Cover with hinge that opens 120 •degrees and can be fixed in position allows easy splicing of connections while box is mounted.

Splicetrayholderwithhingedtrays•gives ability to reach each splice without disturbing other fibers.

Anchoringdevicesfordistribution•and drop cables helps ensure cables remain secure in box.

Noboltsusedtosealenclosurefor•faster, easier installation and access thantraditionalOSPclosures.

Closed by latch with an optional •security device for added security to avoid tampering with fiber network.

3M™ Cable Transition Box BTI

Compactsizerespectsbuildingaes-•thetics, works well in confined spaces.Slotsfor3M™Fibrlok™250µmFiber•Splice2540Gorfusionsplicesleeves.Suitableforcustomersinterestedinthe operational efficiencies and lower labor costs of mechanical splicing, as well as those who opt for traditional fusion splicing.Wellorganizedfibercoilingareamain-•tains appropriate fiber bend radius to maximizenetworkperformance.Strainreliefforbothdistributionand•drop cables ensures secure network connections.Suitableforroundorflatcablewith•uptoa4mmdiameter(.16in.).Com-patible with a variety of drop cable types to accommodate customer preferences.


Motorola GPON ONT

Voice:

TDMvoicewithIntegratedGR303/•TR008

SIPVoIP•

Video:

IPTVandIGMPmulticast•

870MhzRFoverlaywithIntegrated•MOTorolaReturnPathDemodulator(MOT-RPD)

Data:

10/100/1000bT interfaces•

VDSL2,HPNAoptions•

Readylinks RHINO OSG™

ProvidesscalableGigabitEthernet•FTTHterminationsforIPtriple-playservices

Hardened outdoor version and in-•door version with mounting options

Multiplenetworktopologies-Direct,•Chain and Ring

CostEffectiveVoIP,Internet,IPTVand•HPNAimplementations

Loweropticaltransceivercosts-•supports the complete distance range of single mode and multi-modeReadyLinksSFPlaserpacks

CompatiblewithallmajorEthernet•SwitchandRouterVendorsmakingittrulyaplugandplayEthernettermination solution

Readylinks RHINO ONT™

Providesdirect100Mbpsor1Gbps•EthernetFTTHterminationsforIP-based triple-play services

100MbpsEthernettransport•ensures bandwidth will be available nowfordemandingVideo,DataandVoice services with an upgrade path to1Gbpsifneededinthefuture

HPNA3optionbuilt-inforexisting•home wiring

Readylinks RHINO SFPs

GlobalStandardSFPformfactor•

Ranges from 1km to 80km•

Temperature Hardened -40C to •+80C

PlugandPlayinanyRHINOand•IPcoaxunit

Can be used in switches such as •Force10

Come in single fiber or dual fiber •single mode, dual fiber multi-mode,orcopperEthernet

Zhone Znid ONTIntelligentFTTxterminationswithinte-•grated home networking and management

TriplePlayServices-RFVideoorIPVideo,•VoIP,HighSpeedInternetAccess

NoNewHomeWiring-HPNAv3supported•simultaneouslyonCoaxandPhoneLineandpoweroverPhoneLineeliminatestheneedto run new wires.

TwoStepEasyInstallation-Installfiber•enclosure without the need for electronics. Electronicscanbeinstalledafterservicesareordered.

SupportsMultipleLanguages•

BroadbandRemoteAccess-Allows•consumertoVPNintothezNIDandaccesshome computers

RemoteManagement-TR-069,SNMP,and•WebGUI.

Full range of outdoor residental and busi-•ness choices

Zhone HPNA Bridge

Zhone’sHPNAbridgeproducts•aredesignedtoworkwiththezNIDproduct line, allowing customers to use their home’s existing wiring as an Ethernetnetwork

SupportsHomePNA3.0•

Datarateupto112Mbps•

Plug & Play•

Uses existing coaxial TV cable or existing phone line cable to build a home •network

2Standard10/100BaseTFastEthernetportsforconnectingtoPCorSTB•

MDI/MDIXAutoCrossoversupport•

QoSPriorityMappingSupport•

Splicing / Fusion Splicers

AFL FSM-18S

Rugged construction providing •shock, dust and moisture resistance

Dualmonitorpositionwithauto-•matic image orientation

Automaticarccalibration•

User-selectable fiber clamping •method – sheath clamp or fiber holders

Auto-starttubeheater•

ColorLCDdisplayandanti-reflective•coating for excellent visibility in bright sunlight

Simultaneousbatterychargeand•splicer operation

Longlifebattery(upto150splice/•heatcyclespercharge)

Detachableworktableincorporated•into the transit case

Dataandvideodownloadsoftware•and splicer upgrade software includ-ed; software upgrades through PC application via the internet

Greenfriendly–RoHS&WEEE•compliant

AFL FSM-60S

Features:

Rugged construction providing •shock, dust and moisture resistance

Dualmonitorpositionwithauto-•matic image orientation

Automaticarccalibrationandfiber•identification

User-selectable fiber clamping •method – sheath clamp or fiber holders

Auto-starttubeheaterfeature•

ColorLCDdisplaywithanti-reflec-•tive coating for excellent visibility in bright sunlight

Simultaneousbatterychargeand•splicer operation

Longlifebattery(upto160splice/•heatcyclespercharge)

Detachableworktableincorporated•into the transit case

Dataandvideodownloadsoftware•and splicer upgrade software includ-ed; software upgrades through PC application via the internet

Greenfriendly–RoHS&WEEE•compliant

AFL SpliceMate™ FSM-11R & FSM-11S

Highly portable •

Dualcamerainspection•

3.5”dualdirectionmonitor•

Singleor4-fiberversionsavailable••40 second tube heater

Autoarccalibration•

30mphwindprotector•

SpliceMateshownwithkit•

AFL FAST™ Connectors

•

Premise environments •

ConnectionsatthedeskforLAN•environments

Patch panels •

Directequipmenttermination•

FibertotheSubscriber(FTTx) •applications

Repair/replacementrequirements•

Equipmenttestleads »Pre-stubbed, factory-polished ferrule •

Noepoxyrequired•

Precision mechanical alignment •insures low loss

Fiber can be reseated •

3.0mm,2.0mm,and900µmboot•provided with each connector

VFIcanbeusedtoconfirmfiberis•installed properly

MeetsTIA/EIA568Aperformance•requirements

MeetsTIA/EIA604(FoCIS)connector•interfacerequirements

Splicing / Fusion Splicers

The Type-39 FastCat Core Alignment splicer

Only splicer on the market to •featureaDual-AutomaticHeaterSystemwithAutoStartHeaterandAutoStartSplicefunctions,makingit the fastest splicer available today. The light weight unit also features •automatic fiber profiling detection, easy to load fiber holder unit, long life battery, user friendly menu selectionsystem,5.6”adjustablemonitor, and a splice cycle of only 9seconds.Typicalsplicelossis0.02dBforSMF•and0.01dBforMMFCompatiblewithSumitomo’snew•LynxCustomFit™Splice-OnCon-nector.

The Type-66 TuffCat™ Mass Dual-Heater Mass Fusion Splicer

Can be used for all types of ribbon •and single splicing with ease of use in trunk, aerial, or taut-sheath applications. FeaturingDualIndependentSplice•ProtectionSleeveHeatersandAu-tomaticSpliceStartandAutomaticHeaterStartfunctionsFeatures an effortless fiber holder •system, extended life battery, user friendly menu selection system, 5.6”adjustablemonitor,Spanishlanguage option, fiber alignment vibration clamps, and a typical splice time of only 20 seconds.Typicalsplicelossis0.04dBforSMF•and0.03dBforMMFCompatiblewithSumitomo’snew•LynxCustomFit™Splice-OnCon-nector. Fiber holders are compatible with •Sumitomo’sTomCathandheldsplic-ers, as well as other splicers, reduc-ing the customer’s inventory cost

The TomCat Type-25eOffer three versatile choices of an •economically priced single camera unit, a single fiber unit with dual camera and splice loss estimation, and a 4 ct. mass unit that also in-cludes the dual camera with splice loss estimationTypical splice time is 11 seconds•FeatureanAutomaticArcTest•function, multiple language op-tions,built-inbattery,ACadapterincorporatedwithintheunit,LynxSplice-OnConnectorcompatibility,and much more.

Sumitomo Fusion Splicers

3M™ No Polish Connectors, SC/LCAlwaysrightcablelengthwithnocableslack•to store.Onepiece,pre-assembleddesign.Nosmall,•loose parts.Simpleassemblytoolforfast,easyinstallation.•900µmbufferstrainreliefforexcellentpull•out strength.Fiber holder for assembly designed to eliminate •the need to touch bare fiber.Factory-polished fiber stub in ferrule so no •on-sitepolishoradhesivesrequired.Bell-shaped boot helps prevent fiber from •bending below minimum bend radius.

3M™ Fibrlok™ II 2529Keyed,anglecleavesplice.Lowreflectionfor•excellent analog video performance.Simpleassemblytoolsforfast,easyinstallation.•Separatecleaverandassemblytool.Same•cleaverusedforFibrlokspliceand3M™NoPolish Connector.Long-termreliabilitywithstableopticalper-•formance across temperature extremes.

All Sumitomo splicers are ROHS compliant, have a full 2 year warranty, and are serviced

with 24-Hour Technical Support.

3M™ Crimplok™ Connectors

Installationinlessthantwo•minutes.

MeetsEIA/TIA568Aspecifications.•

Non-adhesivedesignforclean•and simple terminations.

Intermateabilitywithstandard•connectors provides conve-nience;quickrestorationofexist-ing systems.

Nosetuprequiredsavestimeand•money.

Minimaltoolsrequired.•

Noelectricityrequiredforinstal-•lation anywhere.

Pre-radiusedPCzirconiaceramic•ferrule provides assured contact of fibers; stability through temperaturechange;qualityperformance.

Test Equipment

AFL M700 Compact Single-mode OTDR

38/36dBdynamicrange •@1310/1550nmIntegratedOpticalPowerMeter•(OPM)andVisualFaultLocator(VFL,650nm)•LSAMeasurementsandmanual•eventsinExpertmode

Pass/FailEventandLinkThresholds•settingsOTDRresultssavedasindustry•standard(GR-196).SORfilesOPMstoresresultsanddisplaysupto•three wavelengths simultaneously Large,highbright,sunlightreadable,•transflectivetouchscreenTool-free,switchableadapters(SC/•FC/LC)Integratedfiberlaunchringholder•2USBhostports•USBdriveandWindows®compatible•software included

AFL OFI-FTTx Active ONT Detector

Rugged, handheld, lightweight •

In-servicedetectionofupstream(1310nm)•activity on FTTx networks

Determineswhichunparkedsplitterpigtails•areconnectedtoONTs

Doesnotrequiretraveltocustomer(ONT)site•

Doesnotrequiredisconnectofsplitterpigtails•

Visual and audible indicators •

Battery operated •

Lowbatteryindication•

AFL OFL280 Handheld FTTx OTDRHandheld,0.8kg(1.7lb)•1.3meventdeadzone•30dB(28dB@1625nm)dynamicrange•FTTx construction model •(OFL280-102)includes:1310/1490/1550nm »

FTTx installation model •(OFL280-103)includes:1310/1550/1625nm »PONpowermeter »Livefiberfilterat1625nm »OPM,OLS,andVFL(650nm)•Internalmemory(>1,000tracefiles)•3.5-inch,indoor/outdoorLCDdisplay•12-hour,rechargeableLi-Ionbattery•USBportforPCconnection•

JDSU T-BERD® 4000

TheT-BERD4000isasmall,compactand handheld test platform designed for all phases of the network lifecycle, from the installation to the mainte-nanceofAccess/FTTxnetworksandtriple-playservices.Modularindesign,theT-BERD®4000offersfieldservicetechnicians the highest performance and superior levels of scalability and upgradeability

Large7-inchindoor/outdoorcolor•display

Cost-effective, compact and hand-•held platform

Multi-layernetworksolutionfrom•physical to services layer

Highly scalable with up to 2 field-•replaceable modules

ConnectioncheckerwithVFL,power•meter and video inspection scope options

Flexible connectivity for fast data •transfer:2xUSB2.0,upto1Gb/sEthernetApplications

JDSU HP3-60FiberInspectionandTestSystemwithIntegratedPowerMeter

The industry’s only handheld solu-tion for inspecting and testing fiber networks with one device.

ThenewJDSUHP3-60displaysystemcombines fiber inspection and optical power measurement into a single seamless handheld device. The result isasignificantincreaseinworkflowefficiency and a decrease in total in-spectionandtestingtime.Alsoavail-ableistheHP3-60-P4thatfeaturesanintegrated patch cord microscope for dedicated patch cord inspection.

Promotes best practices in fiber •handling by combining inspection and testing into one device

Integratedfunctions&feature•improveworkflowbyeliminatingneed to switch from one device to another

Significantlyreducetotalinspection•andtesttimeforsuperiorworkflowefficiency

Reduces the number of tools and •accessories you carry and manage

Inspectthebulkheadwiththeprobe•and the patch cord with the inte-gratedPCM(withHP3-60-P4)

Test Equipment

EXFO PON Power Meter - PPM-350C

Enablesfastdeployment,throughquickreportingandworkflowmanagement.

BPON,EPONandGPONconfigura-•tions

Serviceactivationandtrouble-•shooting

Datastorageandreportingcapa-•bilities

Simultaneousmeasurementof•allPONsignals,anywhereonthenetwork

Innovativeworkflowmanagement,•for boosted test routine efficiency

Enhancedruggedandweather-•proof design

Protected data format, for guaran-•teed test result authenticity

EXFO Handheld OTDR Series - AXS-100

Powerful handheld units combining OTDRandpowermeterfunctionalities,optimizedforFTTxPONcertificationand troubleshooting, as well as for premises network testing.

LAN/WANnetworkcharacterization•

Accessnetworkinstallationand•troubleshooting

Fourmodels:theAXS-100Access•OTDR,theAXS-110SinglemodeOTDR,theAXS-110MultimodeOTDRandtheAXS-110All-FiberOTDR

Eventdeadzoneaslowas0.8m,for•easylocationandcharacterizationof all events

Multipleoptions,includingpower•meter,visualfaultlocator(VFL),fiberinspectionprobe,printerandIPtesting

FaultFindermode,forquickidentifi-•cation/location of fiber breaks

Smartsoftwareoptionproviding•pass/fail status at all wavelengths, as wellasspanloss,ORL,fiberlengthand macrobend locations in a single window

JDSU HST-3000

HandheldServicesTester

Portable test set addressing the needsofLayer1thruLayer7testingwithIPv6Capability

Handheld, modular platform for copper and multi-service testing

SupportforElectricalandOptical•Ethernettestinginasinglemodule.

IPv6optiontoenableinstalla-•tionandtroubleshootingofIPv6networks.

Modularhardwareandsoftware•architectureisflexibleandeasilyupgradedinthefield.Allowstestingof multiple services.

SupportsTriplePlayandFTTXtest-•ing,aswellasTDMnetworktesting.

Future-proof solution for circuit-•switch to packet-switch migration.

Fully configurable - buy only what •you need now, easily upgrade as needs change.

Rugged, hand-held platform ideal •for field use.

EXFO PON/MDU OTDR—FTB-7300E

Designedtomeetthetestingrequire-ments brought by FTTH networks in general,andPONs/MDUsinparticular,enablingtestingat1310,1490,1550and1625/1650nm.

FTTxnetworktesting,optimizedfor•PON/MDU’schallenges

Accessnetworktesting•

Test through high-port-count split-•tersofupto1x64

Dynamicrangeofupto39dB•

Singlemodelivetestingportfor•in-service testing

Locatescloselyspacedeventswith•0.8mdeadzones

Deploysfasterwithshortacquisi-•tion time

Reduces training time with an easy-•to-useGUI

Fiber Optic Cable

AFL Standard ADSS

Suitableforuseondistributionand•high voltage transmission lines

Track-resistant outer jacket available •for installations on high voltage lines where space potentials reach up to 25kV

Gel-filledbuffertubesareS-Z•stranded for easy mid-span access

Cable is water-blocked using dry •core technology, therefore no messy floodingcompounds

Designdetailslistedbelowforspan•lengthsupto1500ft(457m)andfibercountsupto432

Custom designs available for larger •span lengths or other fiber counts

AFL MicroCore®

Scalabledeployment•Rapid cost effective installation •Fibre counts up to 144 •Rangeofcabledesignsandsizesto•suitavarietyofductsizes

NoEMIorearthbondinglimitations•Fibre arranged in buffer tubes with •some designs suitable for 12-fibre management Suitableformicroductssuppliedby•all manufacturers Installationspeedsofupto120m/•min. vand over 2.5km lengths at a time Robust for handling in the field •High level bend capacity •Lowfrictionjacketdesign•Easyaccessandbreakoutoffibres•

PureRibbonDriTube®Armorlux®(Armored)Industry’sFirst100%Gel-freeOSP•Ribbon Cable

FeaturesSumitomo’sEasy-Peel™•technology

Idealforduct,directburied,and•lashed aerial installations

Eliminatesthecleaningandblock-•ing preparation steps to speed overall installation, termination, and splicing while reducing labor and material costs

Lighterweightallowsforeasier•cable handling and longer instal-lation pulls, especially for midspan and cable-end entry applications

Steelarmoredsheathconstruction•produces rugged, rodent resistant cable

Central tube provides easy midspan •access

12 and 24 patented peelable optical •fiber ribbons

Availableupto432fibers•

IndustrystandardMDPEsheath•

ComplieswithEIA/TIA,Telcordia,•RUS,ICEA,andIECrequirements

IntroducingNEWPureDri™LooseTubeSingleArmor/SingleJacketDrywaterblockingelements•

Composed of a corrugated steel •armor layer with a single outer MDPEjacket

Reverse oscillating lay of the buffer •tubes facilitates midspan access

Cleaner and faster cable preparation •and installation, decreasing cost of deployment

Lighterweightfacilitateseasier•cable handling

Eliminatesmessygelfromtoolsand•work station

Corrugated steel armor for added •strength

Up to 288 fibers•

ComplieswithEIA/TIA,Telecordia,•RUS,ICEAandIECRequirements

Sumitomo Electric Lightwave

Superior Essex Loose Tube Single Jacket

Applications:UndergroundDucts&LashedAerial;Trunk,•DistributionandFeederCable;LocalLoop,MetroandLong-Haul;BroadbandNetworksAvailablewithupto288fibers•Singlemode,Multimode,RWPSMF,NZDSandhybrid•Central strength members available in metallic or dielectric•Dry(SAP)corestandard•Standardtubesizeforallfibercounts•Improvedoperatingtemperaturerange•PFM™gel-nonstickygelallowsforeasierandfaster•cleanupCore is constructed by stranding the buffer tubes around •a central member using a reverse oscillated layCoreiswrappedwithflexiblestrengthmemberscovered•with a water blocking tape, then encased with a black polyethylene jacket

The cables featured in this section are just a sampling

of what we have to offer you. We distribute Fiber Optic

Cables for AFL, Corning, Draka, General Cable, OFS,

Prysmian, Sumitomo and Superior Essex. Contact your

Power & Tel representative for pricing and availability.

www.AFLtele.com1.800.235.3423

At Sumitomo, we’re committed to tailoring your fiber optic network by providing new and cost effective solutions that offer the highest quality and most reliable products to drive fiber closer to the end-user. For decades, we’ve provided the most advanced fiber types, cables, splitters, fusion splicing equipment & accessories, and termination solutions to fit your particular topology and network vision.

Highest Quality Dry CablesBroad range of loose-tube and ribbon dis-tribution cables, including Dri-Tube® 100% gel-free cable and our new dry ribbon drop cable. Ribbon cables feature Sumitomo’s leading Easy-Peel™ technology.

Introducing New 100% Gel-Free Loose Tube Cables The latest additions to the Sumitomo loose tube product line are new All-Dielectric and Single Armor/Single Jacket cables that are completely dry and 100% Gel-Free for cleaner, lighter, and faster preparation.

We’ve Got You Covered…with the Industry’s Best Fusion Splicers and Accessories

The industry’s only dual-heater FastCat™ Single and TuffCat™ Mass Fusion Splicers, which improve splicing efficiency by over 80%, join the TomCat™ family…the world’s most popular FTTx handheld splicers.Sumitomo is your 1 stop source for all of your fusion splicing, cleaving, and accessory & consumable needs. The Only Thing More Reliable than Our Splicers is Our Service.

Introducing the Lynx CustomFit™ Splice-on ConnectorCustomized field terminations are now made possible with the Lynx Splice-on Connector. Eliminates need for main-taining inventory of varying lengths

of preterminated jumpers for quick and accurate permanent connectorizations without gels or adhesives.

SumitomoBringing Fiber Where & When You Need It

Visit www.sumitomoelectric.com. Call your Power & Tel Representative at 800-238-7514 today!

THINK RIBBON…THINK SUMITOMO

Panels and Interconnection Fusion Splicers Splice Closures Riser-Rated Cables FTTH Distribution & Drop Cables Hostile Environment Cables Ribbon Cables Loose-Tube CablesFutureFLEX® Air-blown Fiber® System

fttx brochure

Documents

multiservice optical

endtoend opti

fttx network

emerging service interfaces

multiple services

power tel representative

fttx solutionscall

adtran total access