frost fire bracelet pattern

5/13/2018 Frost Fire Bracelet Pattern - slidepdf.com

http://slidepdf.com/reader/full/frost-fire-bracelet-pattern-55a751cb7975f 1/9

Frostfire bracelet by jayceepatterns.com

RAW and Triangle weave

To make this bracelet, you will need the following items:

For a 7.5” bracelet without the clasp:

76 Swarovski 3mm pearls (bright gold)

124 Swarovski 3mm pearls (night blue)72 Swarovski bicone 4mm crystals Sapphire blue ABx2)

350 (2 grms) Size 15 seed beads (Miyuki size 15 rocailles #455)

1 x 6mm Swarovski bicone crystal (dark blue)All of these beads can be obtained from www.firemountaingems.com

You will also need beading thread or Fireline and beading needles.

Remember to keep your tension quite tight through-out the construction of this bracelet.This is an advanced pattern and it is important to lay the diagrams and instructions out

next to each other, so you can refer to both.

Copyright 2009 by Juanita Carlos Distributed by www.Readytobead.com

& www.jayceepatterns.com

1



Frostfire - Bead layout

4 loops

(2 on each side)

8 crystal circle

(4 picots)

4 loop

4 crystal circle

4 loops

8 crystal circle



2



Frostfire Step 1 instructions

The code for the following instructions is as follows:

3mm gold pearls - GP

3mm blue pearls – BP

Size 15 seed beads – seeds4mm sapphire crystals - crystals

Leave a 6” tail, and pick up 1 GP, 1 seed, 1 BP, 1 seed, 1 GP, 1 seed, 1 BP, 1 seed. Gothrough the GP again to form a circle.

Pick up 1 seed, 1 BP, 1 seed, 1 GP, 1 seed, 1 BP, 1 seed. Go through the 1st GP of the

first circle, the next seed and the BP.

Exit the BP and pick up 1 seed, 1 crystal, 1 seed, 1 crystal, 1 seed. Go through the BP, the

next seed, the crystal and the seed. You have made a crystal picot.

Exit the seed and pick up 1 BP, 1 seed, 1 BP, 1 seed,1 BP, 1 seed, 1 BP. Go through the

seed you just exited to form a circle. Go through the next BP and seed.

Pick up 1 crystal, 1 seed, 1 BP, 1 seed, 1 crystal. Go back into the seed you just exited tomake another crystal picot. Go up into the crystal, seed and BP. Pick up 1 seed, 1 GP, 1

seed, 1 BP, 1 seed, 1 GP, 1 seed Go into the first BP to form a circle.

Go through the next seed and GP.

Pick up 1 seed, 1 BP, 1 seed, 1 GP, 1 seed, 1 BP, 1 seed. Go back into the 1st

GP to make

another circle.

Weave through the beads until you get to the 3rd

seed bead in the circle of sapphires to

start the next picot. See Step 1 diagram.

Frostfire Step 2 instructions

Your needle should now be exiting the 3rd seed in the first round of 8 crystals – See Step2 diagram.

Pick up 1 crystal, 1 seed, 1 BP, 1 seed, 1 crystal. Go back into the seed bead to make

another crystal picot.Go through the next BP, and seed bead.

Pick up 1 crystal, 1 seed, 1 BP, 1 seed, 1 crystal.Go back into the seed to make another picot. Go into the crystal of the picot you just

made, the seed and BP.

Pick up 1 seed, 1 GP, 1 seed, 1 BP, 1 seed, 1 GP, 1 seed. Go through the the BP again to

make a circle.

Go into the next seed and GP again.



3



Pick up 1 seed, 1 BP, 1 seed, 1 GP, 1 seed, 1 BP, 1 seed.Go into the GP from the previous circle. Go around through the beads of the second

circle until you get to the next GP.

Go through the next seed bead and pick up 1 crystal, 1 seed, 1 crystal, 1 seed, 1 crystal, 1seed,1 crystal. Go into the seed between the GP and BP of the last circle you made. Go

into the next crystal and the next seed.

Pick up 1 GP, 1 seed, 1 BP, 1 seed, 1 GP, 1 seed, 1 BP.

Go back into the seed you just exited to form a circle. Go around the circle again and exit

the 2nd

GP.Pick up 1 seed, and go through the BP from the circle of 8 crystals.

Pick up 1 seed, 1 GP, 1 seed, 1 BP, 1 seed,Go back into the GP from the 1

stcircle.

Go around through the seed, the BP, and the seed from the 1st

circle. Go through the

crystal, seed, crystal and seed along the top of the 4 crystal circle.See step 3 to continue.

Frostfire – Step 3 instructions

Your needle should be exiting the 3rd

seed bead of the 4 crystal circle.

See the Step 3 diagram.

Pick up 1 BP, 1 seed, 1 GP, 1 seed, 1 BP, 1 seed.

Go through the GP, seed, BP, and seed again, and exit the GP.Pick up 1 seed, 1 BP, 1 seed, 1 GP, 1 seed, 1 BP, 1 seed. Go around through the GP, seed,

BP, seed, GP, seed, and exit the BP.

Pick up 1 seed, 1 crystal, 1 seed, 1 crystal, 1 seed. Go back through the BP, seed, crystal,and seed.

Pick up 1 BP, 1 seed, 1 BP, 1 seed, 1 BP, 1 seed, 1 BP. Go through the last seed you

exited to form a circle.Go through the BP, seed, BP, seed, BP, and seed of this circle.

Pick up 1 crystal, 1 seed, 1 BP, 1 seed, 1 crystal. Go back into the seed and up through

the crystal, seed, and BP. Pick up 1 seed, 1 GP, 1 seed, 1 BP, 1 seed, 1 GP, 1 seed.

Go back through the BP, your needle is exiting, and through the next seed, GP, seed, BP,seed and GP. Exit the GP. Pick up 1 seed, and 1 BP. Go through the seed of the 4 crystalcircle.

Pick up 1 GP, 1 seed, 1 BP, 1 seed. Go into the GP of the previous circle.

Work your way back down to the circle of 4 BP’s and seeds, so that your needle is

exiting the third seed bead in that circle ready to make another crystal picot.



4



At this point you will be in the same position as you were to start step 2. See diagram for

Step 2. Repeat steps 2 and 3.



5



Frostfire - Step 1

Start here

When you get to here, work

your way back through the

beads to where the second

red arrow is.

Step 2 begins here

4mm Swarovski bicones - Sapphire ABx2

3mm Swarovski pearls - Night blue

Size 15 rocailles

3mm Swarovski pearls - Bright gold



6



Frostfire - Step 2

Begin stitching here for step 2

Exit here to start step 3



7



Frostfire - Step 3

Start stitching here for

step 3

When you get to here, work your

way through the beadwork untilyou get to the 4 BP circle below

and exit the 3rd seed bead.

Exit this 3rd seed bead to continue the

pattern, which repeats from step 2.

See the diagram for step 2.



8



Step 4 ClaspTo do the clasp, exit the seed on the

right of the GP on the left.

Pick up 7 seeds, 1 x 6mm crystal and

1 seed.

Go back through the crystal and 3 of the seeds.

Pick up 4 seeds and go through the

seed next to the GP on the opposite

side.

Repeat the thread path to

reinforce.

Do the same at the opposite

end of the bracelet, but add

a loop of seeds instead of a

crystal. I have only shown

a few seeds added here inthe diagram.

You need to add enough

seeds to make sure the loop

will fit over the crystal withou

being too tight or too loose.



9

frost fire bracelet pattern

Documents