free shooting bench plans
TRANSCRIPT
-
8/17/2019 Free Shooting Bench Plans
1/18
Shooting Bench Planswww.thomasdraper.com
-
8/17/2019 Free Shooting Bench Plans
2/18
Tools needed:
Circular saw (unless you can get your lumber supplier to cuteverything)
Drill
Screwdriver or bit to fit drill
Square
Level
Tape Measure
Pencil
File, Rasp, or Sander for smoothing rough cut edges
Eye & Ear Protection
Hole saw (only needed if you want to add the rifle rest)
Materials needed:
- All lumber needs to be as straight and smooth as possible.- Pressure treated wood is highly recommended. It will greatly increase the life of
your shooting bench.
(1) 6x6x8’
(6) 2x6x8’
(4) 5/4 x 6x8’ decking boards
2 pounds 3” deck screws. Torx (star) or square head are recommended. 1 Pound 2” deck screws. Torx (star) or square head are recommended.
This bench can be built by one person, but a second set of hands makes it much easier.
You should pre-drill all holes before running in the screws to keep the wood from splitting.
All the deck boards and the rifle rest screws should be countersunk to avoid them from ever coming intocontact with your firearms and marring their finish.
I use Torx head deck screws whenever possible, they cost a little more but you won’t have problems
with the bit spinning and rounding the heads like you do with traditional Phillip head screws.
http://images.search.yahoo.com/images/view;_ylt=A0PDoVyWbjJQ.R4AK3SJzbkF;_ylu=X3oDMTBlMTQ4cGxyBHNlYwNzcgRzbGsDaW1n?back=http://images.search.yahoo.com/search/images?p=torx+head+screw&n=30&ei=utf-8&y=Search&fr=yfp-t-701&tab=organic&ri=81&w=120&h=120&imgurl=upload.wikimedia.org/wikipedia/commons/thumb/a/a9/Screw_Head_-_Torx.svg/120px-Screw_Head_-_Torx.svg.png&rurl=http://www.diynot.com/forums/viewtopic.php?t=232709&size=3.8+KB&name=hex+head+screw+and+this+is+a+torx+head+screw&p=torx+head+screw&oid=57101914357d1a433542672adc0cfa4e&fr2=&fr=yfp-t-701&tt=hex+head+screw+and+this+is+a+torx+head+screw&b=61&ni=100&no=81&ts=&tab=organic&sigr=11jv9o9fd&sigb=13km38k8d&sigi=137cm3db8&.crumb=Zi7B8P3lznf
-
8/17/2019 Free Shooting Bench Plans
3/18
Here is a breakdown of how the wood needs to be cut.This is not to scale. It is just a visual of what you will cut from each board.
(I find it helpful to put a check mark next to each piece as I cut them )
60 36 2x
60 36 2x
27 27 18 9 9 2x
51 42 2x
51 17 1/4 17 1/4 7 3/8 2x
17 1/4 17 1/4 14 7/8 7 3/8 30 2x
36 36 185/4
Deck
36 36 185/4
Deck
36 18 18 10 105/4
Deck
36" x 2
3/8 10 10 10 10 10 105/4
Deck 18" x 2"
32 32 32 6x
-
8/17/2019 Free Shooting Bench Plans
4/18
* I have also found that writing on each board as I cut them and stacking them accordingly greatly speedsup the assembly process.*
-
8/17/2019 Free Shooting Bench Plans
5/18
Assembly directions:
1. Layout the table top as shown below and screw together with 3” screws.
2. Now attach the 3 legs and 3 braces as shown below with 3” screws.
3. Now flip the table over and stand it on its legs.You may want to get some help with this as the bench is getting pretty heavy at this point.
-
8/17/2019 Free Shooting Bench Plans
6/18
4. Now attach the decking boards to the top to make the table surface using the 2”screws.Be sure to sink the screws into the wood just a little to avoid damage to items laid on its surface in the
future.On a couple of benches I found that I did not need the small strips (36” x 2 3/8 and 18” x 2”) when
working with treated wood.
5. Now take the (4) 2x6’s cut to 17 ¼ and screw them together as shown below to makethe 2 legs for the seat.
-
8/17/2019 Free Shooting Bench Plans
7/18
6. Now take the 2 seat legs you just made and the (2) 2x6 ’s cut to 60” and the (1) 2x6cut to 42”. And assemble the seat assembly as shown below. I have my legs set in 15”from the outsides (on the top board) as it seems to line up nicely under the shooter, butyou can put them anywhere you want under there.I have found that it can be easier to pre assemble the seating unit and then attach it to the bench. Thiscan be done by assembling everything but the front 60” board. Then you can put the seat in place and put
the front 60” piece in place and screw everything to the rear leg. If you have a second person you can putit all together then tip the bench forward and slide the seat assembly into place.
-
8/17/2019 Free Shooting Bench Plans
8/18
7. Now attach the front brace as shown below.
8. Now attach the 5/4 decking boards to the seating unit with the 2” screws. I try tomake them flush across the back which will create a little overhang in the front.
-
8/17/2019 Free Shooting Bench Plans
9/18
9. Now take the 30” 2x6 (should be the only piece left ) and draw a line down thecenter. The center should be 2 ¾” in from the sides.
10. Now put marks down the line where you want the rifles to rest. I start mine at 3” inand every 3” from there. They should be at 3-6-9-12-15-18-21-24-27 for a total of 9holes.
-
8/17/2019 Free Shooting Bench Plans
10/18
11. Now drill the 9 holes. I typically use a 1 ¾ hole saw for mine.
12. Now cut the board down the center.
-
8/17/2019 Free Shooting Bench Plans
11/18
13. Next mount it to both sides of the bench with 3” screws. Be sure to sink the screws into the wood just a little to avoid damage to your gun barrel.
-
8/17/2019 Free Shooting Bench Plans
12/18
The finished product!
-
8/17/2019 Free Shooting Bench Plans
13/18
Top View
-
8/17/2019 Free Shooting Bench Plans
14/18
-
8/17/2019 Free Shooting Bench Plans
15/18
-
8/17/2019 Free Shooting Bench Plans
16/18
-
8/17/2019 Free Shooting Bench Plans
17/18
Thank you for your purchase.Please feel free to contact us at [email protected] if you have any questions or
comments.
mailto:[email protected]:[email protected]:[email protected]:[email protected]
-
8/17/2019 Free Shooting Bench Plans
18/18