Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

60 TONNE SPOOLING MACHINE

MODEL: A-17

A-17 is our 60 Tonne reel capacity spooling machine. It comes complete with hydraulically controlled under rollers to assist in loading/unloading in a dynamic environment.

The Spooling unit comes equipped with a double hagglund motor capable of delivering back tension up to 34 tonne.

Reel SizeMax Reel Width 2700mmMin Reel Width 1100mmMax Flange Height 1700mm

Spooler DimensionsWidth 2600mmLength 5400mmHeight 2790mmWeight 10,000kgs

The spooling unit has certified lifting points and is provided with load test certificates.

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

100 TONNE SPOOLING MACHINE

MODEL: A-46

A-46 is our 100 Tonne reel capacity spooling machine. It comes complete with under rollers to assist in loading in a dynamic environment. The spooling unit comes equipped with a double hagglund motor capable of delivering back tension up to 34 Tonne.

Reel SizeMax Reel Width Adjust to suitMin Reel Width 1927mmMax Flange Height 4000mm

Spooler DimensionsWidth 3000mmLength 7638mm

Height 3214mmWeight 16,000kgs

The spooling unit has certified lifting points and is provided with load test certificates.

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

150 TONNE SPOOLING MACHINE

MODEL: A-33

A-33 is a 150 Tonne reel capacity spooling machine. The spooling unit can provide up to 64 Tonne back tension. The machine is fully adjustable to accomodate different sized reels.

Reel SizeMax Reel Width 4429mmMin Reel Width 2269mmMax Flange Height 2000mm

Spooler DimensionsWidth 3100mmLength 8400mmHeight 3400mmWeight 20,000kgs

The spooling unit has certified lifting points and is provided with load test certificates.

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

300 TONNE SPOOLING MACHINE

MODEL: A-41

A-41 is our 300 Tonne drum weight capacity high performance spooling unit. The spooling unit is fully adjustable by hydraulics. The spooling unit can provide constant back tension up to 64 tonne.

Reel SizeMax Reel Width 6182mmMin Reel Width 1750mmMax Flange Height 6000mm

Spooler DimensionsWidth 3374mmLength 8876mmHeight 3701mmWeight 20,000kgs

The spooling unit has certified lifting points and is provided with load test certificates.

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

400 TONNE SPOOLING MACHINE

MODEL: FOI-WN-S12

The 400 Tonne single drum winch or Big Blue, as she is known is a robust and efficient winch. It is ideal for use in subsea deployment and has a constant tension ability for up to 385 Tonne.

Winch Specifications:Rope Holding Capacity 3000mt of 83mm ropeMaximum Pull 1st layer - 345 TonneHoisting Speed 4.4mt/min at the first layer

Drum DimensionsWidth 2580mmBarrel Diameter 1800mmFlange Diameter 3400mm

400 Tonne Winch DimensionsWidth 4960mmLength 4960mmHeight 4280mmWeight 80,000kgs

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

150 TONNE SINGLE DRUM WINCH

MODEL: SD-WN-28

Our 150 Tonne single drum winch has the advantage of being complete with its own power pack. The robust design and accurate controls means it is highly practical for winch operations.

Winch Specifications:Maximum Pull 1st layer - 150 TonneHoisting Speed 4,8mt/min at the first layer (low gear)Hoisting Speed 9.7mt/min at the first layer (high gear)

Drum DimensionsWidth 1370mmBarrel Diameter 1016mmFlange Height 690mm

150 Tonne DimensionsWidth 4048mmLength 4605mmHeight 3740mmWeight 36,000kgs (Bare)

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

120 TONNE DOUBLE DRUM WINCH

MODEL: DD (1-8)

Our fleet of 8 units x double drum winches are operational friendly and designed to run 4x or 8x mooring spreads for barges and can be set up to the customers specific project needs.

Winch Specifications:C/W Hydraulic Power PackMaximum Pull 1st layer - 100/50 Tonne (high/low gearing)Hoisting Speed 6.0mt/min at the first layer (low gear)Hoisting Speed 12.0mt/min at the first layer (high gear)Brake Hold 150 Tonne Static 1st layer - 200 Tonne Pawl LockDD / Rope Capacity 1720mt of 58mm diameter wire rope

DD / DimensionsWidth 3910mmLength 5715mmHeight 3915mmWeight 48,000kgs (Bare)

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

400 TONNE LINEAR WINCH

MODEL: LW - 1

The 400 Tonne linear winch can haul in horizontal loads under automatic or manual mode. The unit is equipped with contactless limit switches which aids in continuous operation without delay.

Winch Specifications:

Two gripper wedges can be fitted with adapters to suit:

115mm diameter wire rope87mm diameter wire rope74mm diameter wire rope64mm diameter wire ropeSpecial sizes are available upon request

Effective pull in speed 4mt/minCylinder Stroke 1000mm

Linear Winch DimensionsWidth 2375mmLength 11800mmFlange Diameter 900mm (without davits installed)Weight 40,000kgs

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

500 TONNE CHAIN TENSIONER

MODEL: CT-1

This system was built to meet the operational needs to cross tension chain at high loads. The unit is robust and complete with its own HPU. The unit is supplied with MPI/NDT reports for all load bearing areas.

Chain Tensioner Specifications:Max. Diameter of Chain 127mmMin. Diameter of Chain 76mmTension Stroke 1800mmPush Speed 0.9mt/minPull Speed 1.5mt/minPressure transduced tension read out

Chain Tensioner DimensionsWidth 2121mmLength 9064mmHeight 950mmWeight 23,000kgs

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

HUB (UNDER ROLLER) SPOOLER

MODEL: H-40

Our hub under roller spooling unit can be used to install under control speed flexible riser or spiral strand to a track tensioning unit.

Hub Spooler Specifications:Max. Storage Capacity 350 TonneMax. Drum Flange Diameter 9800mmMin. Drum Flange Diameter 6000mmHoisting Speed 2 RPMHoisting Force 16 TonneBack Tension Force / Brake Force 16 Tonne

Spooler DimensionsWidth 6930mmLength 7500mmHeight 1000mmWeight 17,000kgs

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

TRACK TENSIONER

MODEL: TT-1

The track tensioner has the ability to lay flexible riser and umbilical subsea. It can be used in conjunction with the H40 Hub spooling machine.

Track Tensioner Specifications:Max. Diameter of Product 800mmMin. Diameter of Product 200mmClamping Length 2.812mtMax. Clamping Force 46 TonneMax. Pulling Force 19.8 TonneMax. Hold - Back Tension 23.3 Tonne50 V-Clamp per track

Track Tensioner DimensionsWidth 2400mmLength 5916mmHeight 4361mmWeight 19,000kgs

Brochure contains general information only. All information is believed to be correct but no warranty is given as to its accuracy and completeness as well as to the availability, adequacy and suitability of any product and/or service. To the fullest extent permissible, Franklin Offshore disclaims all liabilities for any loss, claim or damage arising from any information contained in this brochure.

Franklin Offshore International Pte. Ltd.Reg No.: 198402596 WNo. 11 Pandan Road Tel : +65 6264 3451Singapore 609259 Fax : +65 6264 1130www.franklin.com.sg Email : general@franklin.com.sg

RIGGING LOFT

MODEL: RL-1

The Franklin rigging loft is a portable container complete with all the rigging equipment and test certificates. Each unit is designed to customers rigging requirements.

Specifications can include:110/220 Volt Power SupplyInternal and External LightingExplosive Proof Fittings and LightingWork Bench with Bench Vice

Rigging Loft DimensionsWidth 2439mmLength 3048mmHeight 2439mmWeight 10,000kgs