fox offer

FOX SOLUTIONSSiemens System House

To,ED Process Technologies Pvt.Ltd.Thane

Quotation No.

Your Ref.

FSL/ 10-11/PQ064B

Email

Dt:

Dt:

25/10/10

Kind Attn: Mr. Nilesh / Ajay

Sub: Offer for Siemens Make (PCS7 system)

Dear Sir,

We refer our discussion regarding above subject. In line with the enquiry, we are pleased to submit our offer.

Our offer includes:1. Features Of PCS-7 System 2. Bill Of Material3. Fox scope of Supply 4. Price schedule.5. Terms and conditions.

Kindly refer to our offer for further details, Incase of any queries please feel free to contact us.We await your call for finalizing the above requirement.

Thanking you,Yours faithfully,For Fox Solutions.

Sachin KeskarAuthorized Signatory

Salient feature of Simatic PCS7 System & its Advantages

1. Plantwide engineering toolTag database is common throughout the system & there is a unique Engineering tool for OS, AS, ES as well as I/O system. The complete control scheme is structured graphically using CFC & SFC. This confirms to IEC 61131-3 standards.The engineering tool also elaborate giagnostic tool built-in. No programming knowledge required. Easy implementaion & understanding of the control schemes. As the tool is graphical even a Process engineer can modify or extend the schemes without any error. Simulation tool permits testing the new schemes off line before it is implemented. Extensive Diagnostic aids maintenece person to take corrective actions immediately which reduces plant down time. No separate ES tools for OS, AS & I/Os

2. Totally Integrated approachThe components of Simatic PCS7 namely OS(Operator Stations), AS (Automation System), CS (communication Systems) ES (Engineering system) & I/O subsystems are integrated together with standard & proven networks & with fully optimised & standard open protocols. All the components uses single database. This provides seamless vertical & Horizontal integration i.e. integration betwen various plant sections & integration from sensor to the boardroom. High throughput providing higher response time.

3. Open ArchitectureStandard open interfaces are available e.g. Profibus, ethernet, OPC, @aglance (Optional), etc. Interfaces third party components in the plant & MIS packages, ERP packages like SAP R3 into the PCS7 architecture (Optional) Lower integration costs due to open interfaces

4. ScalabilityThe fine scalability & wide variety of possible extensions enable Simatic PCS7 to be adapted to the plant functionalities and requirementin the best possible mannerand also at lower cost. Enables user to buy exactly what he require today. At the same time has a expandibility to grow along with the process requirements or additional process sections at minimal additional costs lower life cycle cost

Client: ED Process Offer no: FSL/ 10-11/ PQ64BProject: Date: 26.10.10

5. Easy operations & supervisionThe operator station are based on Windows NT operating system. The Graphics, Trends, Report, Alarms, I&C faceplates are based on the international norms. The extensive liabrary of process objects are available in 2-D or 3-D forms as per ISA standards. Well defined & yet flexible hirarchy for better & easy plant controls. Operator action request which prompts & guides the operation & maintenance personel in case of abnormal conditions. On-line SFC visuallisation puts opeartor fully in control of the complicated sequences in the process. Ergonomic I&C faceplates facilitates operator to have precise & clear information & controlability of the process parameters. lower operating cost

6. Reports & logsVarious reports like shift, hourly, daily, weekly, monthly reports can be configured as per the particular needs of the user. All operator actions & events are logged with a time stamp. All actions & events are logged with timestamp which allows analysis of the results or a post mortem incase of any abnormal happening so that corrections & further optimisation can be carried out. Reports allows a well structured & precise information on production, economics for the management.

7. SecurityExtensive Access protection/control and operating privilages for different levels like Manager, Supervisor, Operator, Maintenance engineer etc can be planned. protection against unauthorised operations Tracking of password login & logout with timestamping

8. Coupling to SAP R/3 (optional)The R3i-PI module is a SAP-certified interface that ipmplements the interface to the SAP R3 production planning system, the PP-Pi module. This offers seamless integration & automation of data transfer between PP-PI of SAP r/3 and SIMATIC PCS7.PP-PI coordinates the production orders comming from the customers sales department. The planned orders are passed on to the production department as SAP control recipes. The R3i-PI module converts these SAP control recipes as production orders and batches for BATCHflexible. The batch related parameters are subsequently transferred into the control recipe of Batch flexible

9. Powerful & scalable Automation subsystem 10. Modular, fan-free & robust design

- 3-10ms swithover time for CPU redundancy. Bumpless transfer.- MTBF : over 15 years- Fit for precise Closed loop controis & analog processing as well as high speed binary signal

processing for interlock & sequencing which is not availabe with conventional DCS & PLC systems. The offered system is a bit more than a normal DCS solution.

11. Some of the above features come as an optional package please consider additional cost for optional package supply as per the requirement.

Nasik : SSA72 Shrawan Sector Ashwin Nagar Nasik –422009 Ph/Fax :0253 2399648 / 2399647Pune : Vimal Laxmi opp Dinanath Mangeshkar Hospital Erandwana Kothrud Pune 411004 Ph/Fx :020 25457492Mumbai : 703 Prem Sagar 3-A Linking Rd. Khar(W) Mumbai – 400052 Ph/Fax 022 26041037 / 26601748 Vapi : Gala-4 Bldg-C Gnd Floor Span Indl Area Near RTO check post Dadra 396191 UT of D&NH ph 9824116064 Kolkatta: Maya Apt , Flat noB1 , 2G DharmatalaRd , Kasba ,Kolkatta – 42 ph : 09831459026

3


I/O Count FOR DCS Main Panel

DI = 96 (24 V DC)DO = 64 (24V DC)AI = 116 (Two Wire 4 -20mA) AO = 34 (4-20mA)

I/O Count FOR DCS Remote Panel

AI = 44(Two Wire 4 -20mA) AO = 8 (4-20mA)

BOM FOR Annexure-1 ( For Main DCS )


Description MLFB DI DO AI AO Qty1 AS 416-3 IE 6ES76548DJ003BB0 12 6ES765-85AB17-0YA5 13 6ES76582AB170YA0 24 Profibus Connector with PG 6ES7972-0BB41-0XA0 15 Profibus Connector without PG 6ES7972-0BA41-0XA0 36 Profibus Cable 6XV1830-0EH10 50

Description MLFB D I DO AI AO Qty1 8DI, 24 V DC, standard (1 unit) 6ES7131-4BF00-0AA0 152 192 8DO, 24 V DC/0.5A, standard (1 unit) 6ES7132-4BF00-0AA0 96 123 6ES 7134-4GD00-0AB0 116 294 2 C H AO Module 6ES 7135-4GB01-0AB1 34 175 PM-E DC 24V 6ES7138-4CA01-0AA0 106 IM-151-1 Standard 6ES7151-1AA05-0AB0 27 6ES7193-4CB20-0AA0 168 Terminal module for AUX1 supply; screw connection6ES7193-4CC20-0AA0 109 Power Supply, 24VDC/5A 6EP0133-3AA00-0AA1 2

REMOTE STATION PANELDescription MLFB D I DO AI AO Qty

1 6ES 7134-4GD00-0AB0 44 112 2 C H AO Module 6ES 7135-4GB01-0AB1 8 43 PM-E DC 24V 6ES7138-4CA01-0AA0 24 IM-151-1 Standard 6ES7151-1AA05-0AB0 15 6ES7193-4CB20-0AA0 36 Terminal module for AUX1 supply; screw connection6ES7193-4CC20-0AA0 27 Power Supply, 24VDC/5A 6EP0133-3AA00-0AA1 1

Sr.No.

Engineering Software 1000 POs V7.1PCS7 OS Software V7.1 1000 POS

S r.No.

4 C H AI Module ( 0-20 mA)

Universal terminal module; screw connection (5 pcs.)

S r.No.4 C H AI Module ( 0-20 mA)

Universal terminal module; screw connection (5 pcs.)

4


BOM For Panel ( Main ) :-

BOM For Panel ( Remote ) :-


1 Control Panel ( 2000 H x 1200 W x 600 D ) 1Panel Accessories

Sr.No. Description Qty1 Terminals Normal AS Required2 Fused Terminal AS Required3 Relay Board(Single Pole) AS Required4 Wires for Panels AS Required5 Panel Accessories & Wires for Panels AS Required6 MCBs AS Required7 MCB For 4 Wire Transmitter 1

Description Qty1 Control Panel ( Wall Mounted ) 1

Panel AccessoriesDescription Qty

1 Terminals Normal AS Required2 Fused Terminal AS Required3 Relay Board(Single Pole) AS Required4 Wires for Panels AS Required5 Panel Accessories & Wires for Panels AS Required6 AS Required7 MCB For 4 Wire Transmitter 4

Sr.No.

Sr.No.

MCBs

5


Deviations1 Furniture, operator console cost is not considered in this offer.2 Commissioning will be on perday basis charges for the same 4000/- Rs. Per-day per

engineer, all expenses shall be charged extra at actuals.3 Analog input/output barrier & isolator is not considered in this offer4 Field cabling conduits & cables not considered in this offer5 Redundancy not considered for CPU , Power Supply & Communication.6 We have considered Single Phase power supply for UPS.

Price Schedule –

Sr. No.

Description Qty Basic Discounted Price Rs

1. Lump sum Price for Siemens DCS (PCS-7 )Automation systemWhich includes:

Supply of hardware and software as per BOM enclosed above as per Annexure 1

Fully Wired Control Panel As per Panel BOM Application software development for PCS7 and

SCADA software development Submission of documentation – 1 sets Commercial PCs --- 3 Nos.

Specification :- Commercial Grade PC, Make :- HP / IBM or Equivalent,Hard Disk :- 250 GB , RAM :- 2 GB , Monitor :- 21"TFT & with required accessories & necessary soft wares.

UPS :- 1 No Rating :- 3 KVA with 30 Minutes Back Up Online , Make :- APC or Equivalent.

Printer :- 1 No A4 Size Laser Jet. UPS :- 1 No Rating :- 1 KVA with 30 Minutes Back

Up Online

Lot 21,50,000.00


6


Terms and Condit ions –

1. Validity of the offer – 4 weeks.

2. Prices – are on Ex works /Vendors works basis. Taxes and duties shall be extra as applicable at the time of dispatch. Presently applicable Excise duty is 8.24% and CST @10% or nil against Form”C”.

3. Delivery: 8-10 weeks from the receipt of Technically and commercially clear Purchase order or 4 week after approval of drawing which ever is latter.

4. Payment Terms: 30 % advance along with the order, 100% including all Taxes and duties against proforma Invoice prior to dispatch of the panel.

5. Packing and Forwarding extra at 2% of order values.

6. Freight and Insurance for the above system shall be to your account.

7. Octroi & other government levies as applicable to your account

8. Insurance to your account


7

fox offer

Documents