fosc 450 ordering guide

FOSC 450Gel-Sealed Fiber Optic Splice Closure

Ordering guide

Welcome to the FOSC 450 Fiber Optic Splice Closure Ordering Guide. This Guide is designed to provide you with the information you need to

specify and purchase the FOSC 450 splice closures and accessories you need for your fiber network.

FOSC 450 fiber optic splice closures are used worldwide!

Please note that this ordering guide is designed for FOSC 450closures as they are configured for North America, Mexico, the Caribbean,

and Central America. For information regarding FOSC 450 closures for other areas of the world, please refer to www.telecomosp.com or contact your local sales or

customer service representative.

Table of Contents

Product IntroductIon

Closure Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 FOSC 450 Closure Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Splice Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Characteristics Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Typical Closure Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

orderIng InformatIon

Ordering Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Description and Ordering Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Commonly Requested Kit Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 RUS Listed Closures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

foSc 450 cloSure acceSSorIeS

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Cable Termination Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Cable Sealing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Splice Tray Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Fiber Management and Routing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Slack Storage Basket Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Closure Mounting Hardware Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Splitters / OC Description Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 WDM’s / OC XC Description Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Grounding Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

addItIonal foSc cloSure ProductS

Introduction to Additional FOSC Closure Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 FOSC Closure Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

engIneerIng InformatIon

Engineering Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Closure Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 FOSC 450 Closure Family Assembly Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Splice Tray Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

FOSC 450

5

FOSC 450 fiber optic splice closures are a family of butt-style closures designed for use most anywhere there are fiber splicing and storage needs.

These closures are available in five sizes, each featuring: Re-usable compressed gel cable sealing components that • accommodate a wide range of cable sizes Hinging splicing trays that provide controlled access to splices and • slack storage Splice and storage compartments accessible via a removable dome-• clamp system Thermoplastic outer materials that withstand temperature and • contaminate extremes Slack storage baskets of various sizes that provide different slack • storage scenariosA range of accessories for a variety of outside plant needs• Many shared components between closure sizes•

FOSC 450 Fiber Optic Splice Closures

A family of closures designed for your fiber network needs!

Product IntroductIon

6

450 ASmallest of the FOSC 450 closure family.

4 cable entry ports, each with multi-cable capability•96 single fiber/144 mass splice capacity•19˝ Long by 8˝ diameter*•Capacity of up to 8 drop cables in addition to a feed-through cable•Compact size for FTTH applications•Accessories available for a wide variety of applications•

450 B ShortOne of the smaller 450 closures.

6 cable entry ports, each with multi-cable capability•144 single fiber/288 mass splice capacity•19˝ long by 9.2˝ diameter*•Uses A size splice trays•Capacity of up to 16 drop cables in addition to a feed-through cable•Fits applications requiring large splice capacity in a small size •Accessories available for a wide variety of applications•

450 B The mid-size FOSC 450 closure.

6 cable entry ports, each with multi-cable capability•144 single fiber/288 mass splice capacity•Increased slack storage capacity over the B Short closure•24˝ long by 9.8˝ diameter*•Capacity of up to 16 drop cables in addition to a feed-through cable•Accessories available for a wide variety of applications•

The FOSC 450 Closure Family

7

450 C Combining the well accepted FOSC 450 D closure, with a short overall length (23˝), the

450 C fits applications where increased splice capacity and small size are a must:

6 cable entry ports, each with multi-cable capability•192 single fiber/864 mass splice capacity•23˝ long by 11.5˝ diameter*•Capacity of up to 16 drop cables in addition to a feed-through cable•Wide-style splice tray•Accessories available for a wide variety of applications•

450 D The largest of the FOSC 450 closure line, the 450 D is capable of handling a wide range of fiber closure needs:

6 cable entry ports, each with multi-cable capability•576 single fiber/1152 mass splice capacity•30˝ long by 11.5˝ diameter*•Wide-splice tray• Accessories available for patching, rehabilitation and a wide variety •of applications

* Diameter measurements are based on the widest diameter points and include the clamp hinge and latching mechanisms. Diameters of the clamps not including the hinge and latch are approximately 1 inch less.

8

These charts represent the capacities of each of the FOSC 450 closure sizes. Capacities may vary due to application variables, such as the amount of slack storage required.

0 96 144 192 288 576

450 C

450 B

BS (B Short)

450 A

450 D

144 288 432 864 1152

450 D

450 C

450 B

BS (B Short)

450 A

SIngle fIber aPPlIcatIon

rIbbon aPPlIcatIon uSIng rIbbon Stack trayS

Splice Capacities

9

characterIStIcS chart

1 Closure length (“L”) plus 10X largest cable diameter installed equals the overall length required for handhole. Maximum dimensions includes clamp and cable sealing.

3 The ribbon tray can also be configured with 12 SC adapters for patching and provide 12 single splice capacity.

4In addition a sock can be used for LBT storage.5With standard basket.6 With tall basket.

7 If using the FOSC-ACC-450-MULTIDROP-3 kit, 3 flat or 3 round cables per port if cable does not exceed <0.25” diameter

8If using the FOSC-ACC-450-MULTIDROP-4 kit and combined cables do not exceed 1” diameter.10Fire Retardant bag or blanket options.11Ribbon/mass fusion can be done but slack is pulled back into the slack area under the trays.12SMOUV splice protection sleeves should be used.

Type/Size D6 C6 B6 BS A4 Closure Size1 (inches) 11.5 dia. 30 L 11.5 dia. 23 L 9.8 dia. 24 L 9.2 dia. 19 L 8 dia. 19 L Approx. Closure Weights (lbs) 20 16 13 10 6 Closure Capacity End-to-End Single Splice (SM6 Modules) 288 96 72 72 48 Single Splice (SM12 Modules)12 576 192 144 144 96 Mass Fusion Splice 1152 864 288 144 144

Mid-Sheath Single Splice 576 192 144 144 72 Mass Fusion Splice 864 432 288 288 216

Trays Per Closure Standard Trays 8 / 65 / 56 8 / 65 / 56 6 / 65 / 46 6 /45/ 26 26 / 35 / 44

Ribbon Trays 43 4 25 2 15

Single Fiber Splice Capacity per Tray SM6 Modules 36 12 12 12 12 SM12 Modules12 72 24 24 24 24 FIST Modules12 96 n/a n/a n/a n/a

Patching Tray (quantity/type) Yes No Yes No No (12/sc) (12/sc) Basket (quantity/type) Yes No Yes Yes Yes (4/all, 8/sc) (4/all, 8/sc) (4/all, 8/sc) (4/all, 8/sc)

Sealing System Closure Dome-to-Base or “O” Ring/ “O” Ring/ “O” Ring/ “O” Ring/ “O” Ring/ Top-to-Bottom Clamp Clamp Clamp Clamp Clamp

Cable Capacity Butt (std./max.) 6 / 167 / 218 6 / 167 / 218 6 / 167 / 218 6 / 167 / 218 4 / 107 / 138

Inline (std./max.) n/a n/a n/a n/a n/a

Fire Retardant No10 No10 No10 No10 No10

Closure Available

Tools Required Can Wrench, Can Wrench, Can Wrench, Snips Can Wrench Snips Snips Snips Snips

Closure Characteristics

10

Typical Closure Kit Contents include:

Dome•Clamp•O-ring•Base, including gel block with trigger•Plugs for unused cable ports•Tray tower to hold hingeable FOSC trays•FOSC trays (quantity according to the ordering description)•Cable attachments (quantity according to the ordering description)•Miscellaneous hardware, including fiber routing (transportation) tubing, cable •retention clamps, strength member retainers, etc.Installation Instructions•

Dome

The dome is made from a polymer, with ribbing added for extra strength. Five different sizes are available (A, BS, B6, C6, D6), matching the five closure sizes in the family.

Base

The base houses the gel block cable sealing system and is the foundation for the tray tower and cable attachment/retention hardware.

Gel Block with Trigger

The gel block provides the sealing mechanism for cables entering the closure. Available with six cables entry ports (450 B, BS, C or D) or four (450 A size only). (Not Sold Separately)

Dome to Base Seal

Domes are attached to the base by means of a clamp. Dome-to-base sealing is accomplished via a compressed O-ring.

tyPIcal cloSure kIt contentS

11

Ordering Information

Making the information work for you.

FOSC 450 fiber optic splice closures can be ordered in a variety of configurations to maximize efficiency and minimize upfront cost. The following pages provide closure choices and the steps to be followed when specifying FOSC 450 closure configurations.

In addition, we have supplied a list of commonly requested closure configurations.

orderIng InformatIon for foSc 450 cloSureS

12

Step Choose

Closure Size: A4, B6, BS, C6, or D6

Termination Hardware Quantity for the Kit: 2, 4, or 6

Capacity and Type of Splice Tray

Quantity of Splice Trays Factory Installed (Choose either “0” trays (no trays installed) or “1” tray installed. Additional trays sold separately.)

Slack Basket Type

Feed-through Ground Quantity

Whether Flash Test Valve is Desired (Valved version is standard.)

1

2

3

4

7

6

5

Follow the steps to choose the desired closure. Then simply match the step to the description key.

Ordering FOSC 450

Fiber Optic Splice Closures

13

1

FOSC 450 - XX - X - XX - X - XXX

2

3

4

7

6

5

deScrIPtIon/orderIng key

Valve for Flash TestingV - Valve (standard)N - No ValveNote: We recommend flash test valves for FOSC closures. However, non valved closures are available upon request

Number of GroundFeed-through Lugs 0 - No grounding1 - 1 ground feed-through lug (A4 only, N/A for BS)3 - 3 ground feed-through lugs (B6, C6, and D6 closures

only, N/A for BS)6 - 6 ground feed-through lugs (C6 and D6 closure only, N/A for BS)Note: FEG & MEG kits provide optional ground isolation for FOSC 450 closures.

Slack Basket TypeN - No Basket

A - A4 Standard Size

B - B6, BS Standard Size

C - C6 Standard Size

D - D6 Standard Size

E - Special Bulkhead Basket

arrangement for B, BS

closures only

T - Tall Size

S - Stackable Trays in D ClosureNote: D-size closures with “N” option include backbone used to route ribbons to ribbon trays. B-size closures include storage “sock.”

Closure Size (inches) A4 - 4 cable entry ports; 8 dia. x 19 long BS - 6 cable entry ports; 9 dia. x 19.5 long B6 - 6 cable entry ports; 10 dia. x 24 long C6 - 6 cable entry ports; 11.5 dia. x 23 long D6 - 6 cable entry ports; 11.5 dia. x 30 long

Termination Hardware Quantity for the Kit 2 - 2 cable attachments included 4 - 4 cable attachments included 6 - 6 cable attachments included (N/A for A size)

Capacity and Type of Splice Tray 12 - A, B, or C tray with two SM6 splice modules24* - A, B, or C tray with two SM12 splice modules 36 - D tray with six SM6 splice modules72* - D tray with six SM12 splice modulesR1 - A, B size ribbon tray (accomodates 12 ribbons/144 fibers)R2 - D size ribbon tray(24 ribbons/288 fibers)R3 - C size ribbon tray(18 ribbons/216 fibers) SF - Stackable single fusion trays (12 splices) NT - No trays *Note: SMOUV (1120-01-US) splice protection sleeves are highly recommended for use with SM12 splice modules.

Quantity of Splice Trays Factory Installed0 or 1 is standard(Choose either “0” trays (no trays installed) or “1” tray installed. Additional trays sold separately.)

14

commonly requeSted cloSure kItS

Closure Includes Cable Factory

Size and Attachment Tray Splice Installed Ground Flash

Part Cable hardware for Capacity Slack Storage Feed-throughs Test

Number Description Entry Ports ports shownA and Quantity Basket and Quantity Valve

A63702-000 FOSC450-A4-2-12-1-N0V A4 2 Ports 12, 1 None NoneB Yes

E25961-000 FOSC450-A4-2-12-1-N1V 2 Ports 12, 1 None Yes, 1 Yes

D77011-000 FOSC450-A4-4-12-1-A0V 4 Ports 12, 1 Standard NoneB Yes

D06322-000 FOSC450-A4-4-12-1-A1V 4 Ports 12, 1 Standard Yes, 1 Yes

F11672-000 FOSC450-A4-4-12-1-T0V 4 Ports 12, 1 Tall NoneB Yes

A36662-000 FOSC450-A4-4-12-1-T1V 4 Ports 12, 1 Tall Yes, 1 Yes

C85997-000 FOSC450-BS-2-NT-0-BOV B Short 2 Ports Ordered Separately Standard NoneB Yes

F79899-000 FOSC450-BS-2-NT-0-T0V (6 ports) 2 Ports Ordered Separately Tall NoneB Yes

F79047-000 FOSC450-BS-2-12-1-B0V 2 Ports 12, 1 Standard NoneB Yes

559088-000 FOSC450-BS-6-12-1-B0V 6 Ports 12, 1 Standard NoneB Yes

C52884-000 FOSC450-BS-6-12-1-T0V 6 Ports 12, 1 Tall NoneB Yes

E87235-000 FOSC450-B6-2-NT-0-B0V B6 2 Ports Ordered Separately Standard NoneB Yes

C25098-000 FOSC450-B6-2-NT-0-B3V 2 Ports Ordered Separately Standard Yes, 3 Yes

E70580-000 FOSC450-B6-4-12-1-B0V 4 Ports 12,1 Standard NoneB Yes

727952-000 FOSC450-B6-4-12-1-B3V 4 Ports 12,1 Standard Yes, 3 Yes

186070-000 FOSC450-B6-6-NT-0-B0V 6 Ports Ordered Separately Standard NoneB Yes

058514-000 FOSC450-B6-6-NT-0-B3V 6 Ports Ordered Separately Standard Yes, 3 Yes

970078-000 FOSC450-B6-6-12-1-B0V 6 Ports 12, 1 Standard NoneB Yes

A55357-000 FOSC450-B6-6-12-1-B3V 6 Ports 12, 1 Standard Yes, 3 Yes

TZ4685-000 FOSC450-B6-6-12-1-T0V 6 Ports 12, 1 Tall NoneB Yes

L08867-000 FOSC450-B6-6-12-1-T3V 6 Ports 12, 1 Tall Yes, 3 Yes

RH0205-000 FOSC450-C6-2-NT-0-C0V C6 2 Ports Ordered Separately Standard NoneB Yes

D64562-000 FOSC450-C6-2-NT-0-C3V 2 Ports Ordered Separately Standard Yes, 3 Yes

516429-000 FOSC450-C6-2-12-1-C0V 2 Ports 12,1 Standard NoneB Yes

EB387Y-000 FOSC450-C6-2-12-1-C3V 2 Ports 12,1 Standard Yes, 3 Yes

LE0932-000 FOSC450-C6-6-NT-0-C0V 6 Ports Ordered Separately Standard NoneB Yes

QJ6888-000 FOSC450-C6-6-NT-0-C3V 6 Ports Ordered Separately Standard Yes, 3 Yes

JI945R-000 FOSC450-C6-6-NT-0-C6V 6 Ports Ordered Separately Standard Yes, 6 Yes

RH0209-000 FOSC450-C6-6-12-1-C0V 6 Ports 12,1 Standard NoneB Yes

LS5331-000 FOSC450-C6-6-12-1-C3V 6 Ports 12,1 Standard Yes, 3 Yes

L15100-000 FOSC450-C6-6-12-1-C6V 6 Ports 12,1 Standard Yes, 6 Yes

V67803-000 FOSC450-C6-6-NT-0-T0V 6 Ports Ordered Separately Tall NoneB Yes

Q98560-000 FOSC450-C6-6-NT-0-T6V 6 Ports Ordered Separately Tall Yes, 6 Yes

EE425Q-000 FOSC450-C6-6-R3-1-COV 6 Ports Ribbon Tray, 1 Standard NoneB Yes

G6165Z-000 FOSC450-C6-6-R3-1-C6V 6 Ports Ribbon Tray, 1 Standard Yes, 6 Yes

C93816-000 FOSC450-D6-2-NT-0-D0V D6 2 Ports Ordered Separately Standard NoneB Yes

757910-000 FOSC450-D6-2-NT-0-D3V 2 Ports Ordered Separately Standard Yes, 3 Yes

A42788-000 FOSC450-D6-6-NT-0-D0V 6 Ports Ordered Separately Standard NoneB Yes

931866-000 FOSC450-D6-6-NT-0-D6V 6 Ports Ordered Separately Standard Yes, 6 Yes

691370-000 FOSC450-D6-6-NT-0-T0V 6 Ports Ordered Separately Tall NoneB Yes

F43265-000 FOSC450-D6-6-NT-0-T6V 6 Ports Ordered Separately Tall Yes, 6 Yes

C14263-000 FOSC450-D6-6-36-1-D0V 6 Ports 36, 1 Standard NoneB Yes

C81638-000 FOSC450-D6-6-36-1-D3V 6 Ports 36, 1 Standard Yes, 3 Yes

272516-000 FOSC450-D6-6-36-1-D6V 6 Ports 36, 1 Standard Yes, 6 Yes

266348-000 FOSC450-D6-6-72-1-D0V 6 Ports 72, 1 Standard NoneB Yes

A08755-000 FOSC450-D6-6-72-1-D6V 6 Ports 72, 1 Standard Yes, 6 Yes

831824-000 FOSC450-D6-6-R2-1-D3V 6 Ports Ribbon Tray, 1 Standard Yes, 3 Yes

R2962P-000 FOSC450-D6-6-R2-1-D6V 6 Ports Ribbon Tray, 1 Standard Yes, 6 YesACable Attachment Hardware is also available separately. See accessories. BGrounds can be added to closure through cable entry ports. Use the following accessory kits: 449105-000 FOSC-ACC-MULT-EXT-GRND-3 (provides 3 ground connections) OR 671575-000 FOSC-ACC-MULT-EXT-GRND-6 (6 ground connections).

Commonly Requested Closure Kits

These charts represent the capacities of each of the • Popular FOSC 450 closure configurations listed below• Additional configurations available upon request

This Page is Being revised

15

RUS Listed FOSC 450 Closures Part Number Description Kit Contents

6Y082E-000 FOSC450-A4-4-NT-0-A1VRUS RUS Listed 450 A kit. Trays sold separately.

C56497-000 FOSC450-B6-6-NT-0-B3VRUS RUS Listed 450 B kit. Trays sold separately.

V73986-000 FOSC450-C6-6-NT-0-C6VRUS RUS Listed 450 C kit. Trays sold separately.

C41693-000 FOSC450-D6-6-NT-0-D6VRUS RUS Listed 450 D kit. Trays sold separately.

RUS Listed Closure Kits

16

FOSC 450

17

Accessories

Extras that make your job easier.

While each FOSC 450 kit comes fitted with components needed for installation, FOSC 450 fiber optic splice closures are accompanied by an extensive line of accessories…from splice trays, to multi-cable-per-port sealing kits, to a range of mounting hardware options…to meet your splice closure needs.

The following is a listing of the most commonly requested accessories, categorized for your convenience. Additional accessories are also available.

If you are unable to locate an accessory you need, please check our web site: www.us.telecomosp.com, or contact your local salesperson or our Customer Service team for additional information.

acceSSorIeS

18

• Provides hardware (when not previously ordered with kit) to terminate cables in closures.

• Available with or without grounding

Cable Termination Accessories

For Includes FOSC 450 For Cable Kits Part Closure Terminating Grounding per Number Description Size Cables In: Hardware Kit Contents Pkg.

C61629-000 FOSC450-CABLE-TERM-2-G All 2 Ports Yes 2 sets each of: Cable Retention Hardware (with hose clamps); Strength Member Retention Hardware; Ground wires 1

F67166-000 FOSC450-CABLE-TERM-2-N All 2 Ports No 2 sets each of: Cable Retention Hardware (with hose clamps); Strength Member Retention Hardware 1

D25359-000 FOSC450-CABLE-TERM-4-BS BS Only 4 Ports No 4 sets each of: Cable Retention Hardware (with hose clamps); Strength Member Retention Hardware 1

659136-000 FOSC450-CABLE-TERM-4-G All 4 Ports Yes 4 sets each of: Cable Retention Hardware (with hose clamps); Strength Member Retention Hardware; Ground wires 1

558850-000 FOSC450-CABLE-TERM-4-N All 4 Ports No 4 sets each of: Cable Retention Hardware (with hose clamps); Strength Member Retention Hardware 1

D20592-000 FOSC-ACC-450-A-CBLTERM A Only 1 Port No Cable Retention Hardware; Strength Member Retention Hardware 5

C67369-000 FOSC-ACC-450-A-CBLTERM-G A Only 1 Port Yes Cable Retention Hardware; Strength Member Retention Hardware 5

cable termInatIon acceSSorIeS

450 A

Cable Retention Plate

19

1 Note: Combined cable diameters must be within cable port size requirements.

foSc 450 cloSure SealIng acceSSorIeS

Closure Sizes

Quantity of Cables Sealed1

Key Sealing Component

Part Number

DescriptionIncludes

CableAttachment

Kits per Pkg.

Multi Cable per

Port Seals

Each fits all FOSC 450 Closures

3Quick InstallClamshell

A38215-000

40606V-000

FAK-MULDRP-45-3-DRP

FAK-MULDRP-45-3/CBL-ATT

No

Yes

10

10

4Gel Tape

Wrap

41606V-000

E21473-000

FAK-MULDRP-45-4-DRP

FAK-MULDRP-45-4/CBL-ATT

No

Yes

10

10

Port Plugs

(used to plug empty cable ports)

Each fits all FOSC 450 Closures

N/A Port Plug AO5721-000 FOSC-ACC-450-PORT-PLUGS N/A 50

ReplacementO-Rings

(fit between dome and

base)

FOSC 450 A FOSC 450 BS

FOSC 450 BFOSC 450 CFOSC 450 D

N/AN/AN/AN/AN/A

O-RingO-RingO-RingO-RingO-Ring

381107-000HG302N-000A51343-000429631-000429631-000

FOSC-ACC-400AB450A-ORINGFOSC-ACC-450-BS-ORINGFOSC-ACC-450-B-ORING

FOSC-ACC-D-O-RING-SEALFOSC-ACC-D-O-RING-SEAL

N/AN/AN/AN/AN/A

55555

• Sealing multiple cables per port

• Miscellaneous sealing components

Cable Sealing Accessories

3-Cable Seal Assembly with

Cable Attachment

20

• Variety of splice trays, capacities, options

• Single and Ribbon fiber styles

Splice Tray Accessories

21

* Tyco Electronics SMOUV splice sleeves highly recommended for use with these trays.

SIngle fIber trayS

Includes Tray Accessory Kit Fits SMOUV Closure Tray Protection Part Kits Per Size Capacity Sleeve Number Description Kit Includes Pkg

A 12 No 497817-000 FOSC-ACC-A-TRAY-12 Tray & clear cover with 2, SM-6 2

splice modules, tie-wraps, instructions A 12 Yes HL0017-000 FOSC-ACC-A-TRAY-12-SMV60 Tray & clear cover with 2, SM-6 2 splice modules, 12 60MM SMOUV splice protection sleeves, tie-wraps, instructions A 24* No 429567-000 FOSC-ACC-A-TRAY-24 Tray & clear cover with 2, SM-12 splice 2 modules, tie-wraps, instructions A 24 Yes EB063E-000 FOSC-ACC-A-TRAY-24-SMV60 Tray & clear cover with 2, SM-12 2 splice modules, 25 60MM SMOUV splice protection sleeves, tie-wraps, instructions BS 12 No 497817-000 FOSC-ACC-A-TRAY-12 Tray & clear cover with 2, SM-6 2 splice modules, tie-wraps, instructions BS 12 Yes HL0017-000 FOSC-ACC-A-TRAY-12-SMV60 Tray & clear cover with 2, SM-6 2 splice modules, 12 60MM SMOUV splice protection sleeves, tie-wraps, instructions BS 24* No 429567-000 FOSC-ACC-A-TRAY-24 Tray & clear cover with 2, SM-12 2 splice modules, tie-wraps, instructions BS 24 Yes EB063E-000 FOSC-ACC-A-TRAY-24-SMV60 Tray & clear cover with 2, SM-12 2 splice modules, 25 60MM SMOUV splice protection sleeves, tie-wraps, instructions B 12 No 898849-000 FOSC-ACC-B-TRAY-12 Tray & clear cover with 2, SM-6 2 splice modules, tie-wraps, instructions B 24 Yes Z75279-000 FOSC-ACC-B-TRAY-24-SMV60 Tray & clear cover with 2, SM-6 splice modules, 12 60MM SMOUV splice protection sleeves, tie-wraps, instructions B 24* No 863927-000 FOSC-ACC-B-TRAY-24 Tray & clear cover with 2, SM-12 2 splice modules, tie-wraps, instructions B 24 Yes Z75279-000 FOSC-ACC-B-TRAY-24-SMV60 Tray & clear cover with 2, SM-12 2 splice modules, 25 60MM SMOUV splice protection sleeves, tie-wraps, instructions C 12 No RH0198-000 FOSC-ACC-C-TRAY-12 Tray & clear cover with 2, SM-6 2 splice modules, tie-wraps, instructions C 24 Yes X35373-000 FOSC-ACC-C-TRAY-12-SMV60 Tray & clear cover with 2, SM-6 2 splice modules, 12 60MM SMOUV splice protection sleeves, tie-wraps, instructions C 24* No RH0202-000 FOSC-ACC-C-TRAY-24 Tray & clear cover with 2, SM-12 2 splice modules, tie-wraps, instructions C 24 Yes C4388W-000 FOSC-ACC-C-TRAY-24-SMV60 Tray & clear cover with 2, SM-12 2 splice modules, 25 60MM SMOUV splice protection sleeves, tie-wraps, instructions D 00 No 122131-000 FOSC-ACC-D-TRAY-00 Tray & clear cover, no splice modules. 2 Includes tie-wraps, instructions. D 36 No 426579-000 FOSC-ACC-D-TRAY-36 Tray & clear cover with 6, SM-6 2 splice modules, tie-wraps, instructions D 36 Yes DK696L-000 FOSC-ACC-D-TRAY-36-SMV60 Tray & clear cover with 6, SM-6 2 splice modules, 40 60MM SMOUV splice protection sleeves, tie-wraps, instructions D 48 No 579575-000 FOSC-ACC-D-TRAY-48 Tray & clear cover with 6, SM-8 2 splice modules, tie-wraps, instructions D 72* No 915167-000 FOSC-ACC-D-TRAY-72 Tray & clear cover with 6, SM-12 2 splice modules, tie-wraps, instructions D 72 Yes JL0937-000 FOSC-ACC-D-TRAY-72-SMV60 Tray & clear cover with 6, SM-12 2 splice modules, 75 60MM SMOUV splice protection sleeves, tie-wraps, instructions D 96 Yes F10669-000 FOSC-ACC-D-TRAY-96-S60 Tray & clear cover with 8, FIST style 2 splice modules, 100 60MM SMOUV splice protection sleeves, tie-wraps, instructions

22

rIbbon fIber trayS

Patch trayS

Tray Accessory Kit Fits Closure Tray Part Kits Per Size Capacity Number Description Kit Includes Pkg. A or B 144 Mass Fusion 709972-000 FOSC-ACC-A/B-TRAY-12-RBN A/B Size Ribbon Tray 1 (12 splices x 12 with clear cover and 2, SM-6 splice fiber ribbon) modules, tie-wraps, instructions C 216 Mass Fusion 398955-000 FOSC-ACC-C-TRAY-RIBN-18 C Size Ribbon Tray with clear 1 (18 splices x 12 cover and 3, SM-6 splice fiber ribbon) modules, tie-wraps, instructions D 288 Mass Fusion 061064-000 FOSC-ACC-D-TRAY-RIBN-24 D Size Ribbon Tray with clear 1 (24 splices x 12 cover and 4, SM-6 splice fiber ribbon) modules, tie-wraps, instructions

Tray Accessory Kit Fits Closure Tray Part Kits Per Size Capacity Number Description Kit Includes Pkg. B 16 fiber A38455-000 FOSC-ACC-B-TRAY-P-16-0 B-size Patch Tray with adapter retainer. 1 patch point Holds up to 16 SC style adapters. D 16 fiber C03247-000 FOSC-ACC-D-TRAY-P-16-0 D-size Patch Tray with adapter retainer. 1 patch point Holds up to 16 SC style adapters. D 12 fiber C91240-000 FOSC-ACC-D-TRAY-P-SC/APC D-size Patch Tray, adapter retainer, 2 patch point and. 12 SC/APC style adapters D 12 fiber E90832-000 FOSC-ACC-D-TRAY-P-SC/UPC D-size Patch Tray, adapter retainer, 2 patch point and 12 SC/UPC style adapters.

Splice tray dimensional information can be found in the Engineering Information Section.

23

SPlIce tray coverS

Fits Closure Part Kits per Size Number Description Kit Includes Pkg.

A or BS 90887R-000 FOSC-ACC-A-TRAY-COVER 1, clear, A-size tray covers 25

B Y66598-000 FOSC-ACC-B-TRAY-COVER 1, clear, B-size tray covers 25

C YD926E-000 FOSC-ACC-C-TRAY-COVER 1, clear, C-size tray covers 25

D ZP0533-000 FOSC-ACC-D-TRAY-COVER 1, clear, D-size tray covers 25

SPlIce moduleS (for rePlacIng or addIng moduleS to trayS)

Tray Accessory Kit Fits

Closure Part Kits Per Size Number Description Kit Includes Pkg. All 581981-000 FOSC-ACC-SM6-MODULES 6-splice capacity snap-in module for all FOSC 450 Trays 48 All 332341-000 FOSC-ACC-SM8-MODULES 8-splice capacity snap-in module for all FOSC 450 Trays 48 All 275897-000 FOSC-ACC-SM12-MODULES* 12-splice capacity snap-in module for all FOSC 450 Trays 48

*Tyco Electronics SMOUV splice sleeves are highly recommended for use with these trays/modules.

Smouv fuSIon SPlIce ProtectIon SleeveS

Fiber TypePart

Number Description Sleeve InformationKits per

Pkg.

Single Fiber

693979-000 SMOUV-1120-01-USHeat shrinkable, 60mm, single fiber

splice protection sleeve100

143339-000 SMOUV-1120-02-USHeat shrinkable, 45mm, single fiber

splice protection sleeve100

Ribbon Fiber 888498-000 SMOUV-1120-R2/12-USHeat shrinkable, 42mm, 12 fiberribbon splice protection sleeve

50

24

For Closure Part Number Description Kit Includes

Transportation Tubing

& Spiral Wrap Tubing

All

TransportationTubing

526767-000 FOSC-ACC-TTUBE-SMLL-16IN 240, 16 inch pieces

829333-000 FOSC-ACC-TTUBE-SMLL-50FT 10, 50 foot sections

118317-000 FOSC-ACC-TTUBE-LRGE-16IN 240, 16 inch pieces

646311-000 FOSC-ACC-TTUBE-LRGE-50FT 10, 50 foot sections

577809-000 FOSC-ACC-TTUBE-RIBN-16IN 240, 16 inch pieces

226809-000 FOSC-ACC-TTUBE-RIBN-50FT 10, 50 foot sections

Buffer Tube Wrap RH0073-000 FOSC-ACC-LBTWRAP-100 100 wraps

Spiral Tubing

234855-000 FOSC-ACC-SPRLTUBE-1/8

469031-000 FOSC-ACC-SPRLTUBE-3/16

RH0090-000 FOSC-ACC-SPRLTBE-3/16-25 1, 25 foot section

460490-000 FOSC-ACC-SPRLTBE-3/8-50 1, 50 foot section

fIber management & routIng hardware

• Single and Ribbon fiber

Fiber Management and Routing Accessories

118317-000

829333-000

25

Slack Storage/comPonentS/baSketS

Closure Sizes Basket Style Part Number DescriptionKits per

Pkg.

Slack Baskets-For converting

no-basket kits to basket versions, or for changing

basket size.

FOSC 450 AStandard

TallE14672-000A91433-000

FOSC-ACC-A8/450A-BASKETFOSC-ACC-450A4-BASKET-T

11

FOSC 450 BSStandard

Tall457507-000F53958-000

FOSC-ACC-B-BASKETFOSC-ACC-B-BASKET-TALL

11

FOSC 450 BStandard

Tall457507-000F53958-000

FOSC-ACC-B-BASKETFOSC-ACC-B-BASKET-TALL

11

FOSC 450 CStandard

TallRH0199-000RH0200-000

FOSC-ACC-C-BASKETFOSC-ACC-C-BASKET-TALL

11

FOSC 450 DStandard

Tall089279-000056395-000

FOSC-ACC-D-BASKETFOSC-ACC-D-BASKET-TALL

11

• Various styles for regular or increased slack storage

Note: Tall style slack storage baskets provide increased slack storage over standard baskets, but may reduce splice tray capacity!

Slack Storage Basket Accessories

089279-000

26

Fits 450 Closures

Part Number

DescriptionStd.Pack

Kit Information

A BS B C D

• • • • • 360889-000 FOSC-ACC-LASHING-STRAPS 102 metallic lashing straps, 2 nylon lashing straps,

4 cable spacers

• • • • • 663259-000 FOSC-ACC-AERIAL-CLAMPS 102 hanger brackets and

clamps, 2 Snaplock clamps, 2 lashing straps

• • • • • 124063-000 FOSC-ACC-LASH-CBL-SUPORT 1 Lashing strap

• • • • • 340883-000 FOSC-ACC-UNIV-AER-CL-NO6 52 hanger brackets and

clamps, 2 lashing straps, ground wire

• • • • • A13909-000 FOSC-ACC-450-AERIAL-CLMP 10

1 dome mounting bracket, 1 base mount-ing bracket, 2 Snaplock

clamps, associated hardware

• Variety of mounting hardware options

Closure Mounting Hardware Accessories

aerIal

*Snaplock is a trademark of Epicor Industries, Inc.

27

Fits 450 Closures

Part Number

DescriptionStd.Pack

Kit Information

• • • • • F29601-000 FOSC-ACC-PED-BRKT-UNIV 10Universal pedestal bracket,

Snaplock clamp, associated hardware

Fits 450 Closures

Part Number

DescriptionStd.Pack

Kit Information

• • • • • C82508-000 FOSC-ACC-WALL/POLE-MOUNT 12 mounting brackets, 2 Snaplock clamps,

4 lag bolts

• • • • • D80858-000 FOSC-ACC-WALL-PMT-BRKT 12 mounting brackets, 4 Snaplock clamps,

4 lag bolts

• D91837-000 FOSC-ACC-MTGBKT-450-B6PL 1

Custom bracket compo-nents and hardware for mounting FOSC 450 B6

closure to pole

• 919435-000 FOSC-ACC-D-POLE-MOUNT 1

Custom bracket and hardware for mounting FOSC 450 D6 closure

to pole.

cloSure mountIng hardware

PedeStal

Pole or wall

*Snaplock is a trademark of Epicor Industries, Inc.

28

FOSC OCTray Type

1 - FOSC-A-TRAY-24, splice modules in the middle of the tray 2 - FOSC-B-TRAY-24, splice modules in the middle of the tray 3 - FOSC-D-TRAY-72, splice modules in the middle of the tray 4 - FOSC-A-TRAY-S24, splices near the edges of the tray 5 - FOSC-B-TRAY-S24, - splices near the edges of the tray 6 - FOSC-A-TRAY-24, “black box” concept

Splitter TypeA - Spitter grade A (fused biconical tapered)P - Spitter grade P (standard planar technology)O - Splitter grade O (low loss planar technology)

Number of Integrated Splitters

Number of Inputs per Splitter1 - 1x...splitter2 - 2x...splitter

1

2

3

FOSC OC - X X X X X - XX

6

5

oc deScrIPtIon key

4

Split Ratio 00 - Symmetrical05 - 5/9510 - 10/9015 - 15/8520 - 20/8025 - 25/7530 - 30/7035 - 35/65 40 - 40/6045 - 45/55Note: All split ratio are only

available for 1 x2 and 2x2 splitters.

Number of Outputs per Splitter2 - ...x 2 splitter 3 - ...x 3 splitter 4 - ...x 4 splitter6 - ...x 6 splitter8 - ...x 8 splitterA - ...x10 splitterC - ...x12 splitterG - ...x16 splitterW - ...x32 splitter

29

*Tyco Electronics SMOUV spice sleeves highly recommended for use with these trays/modules.

FOSCTray Type

Fiber Splice Tray

CapacitySplitter

TypePart

NumberPart NumberDescription

Detailed Description

Std.Pack

A 24*

Grade AFused

Biconical Tapered

CA2118-000 FOSC-OC-1A11200 1-1 x 2 splitter, symmetrical split ratio 1

A 24* CC6221-000 FOSC-OC-1A11235 1-1 x 2 splitter, 35/65 symmetrical split ratio 1

A 24* 133450-000 FOSC-OC-1A11400 1-1 x 4 splitter, symmetrical split ratio 1

A 24* D30790-000 FOSC-OC-1A21400 2-1 x 4 splitter, symmetrical split ratio 1

B 24* C79887-000 FOSC-OC-2A11200 1-1 x 2 splitter, symmetrical split ratio 1

B 24* 768084-000 FOSC-OC-2A11400 1-1 x 4 splitter, symmetrical split ratio 1

B 24* 861456-000 FOSC-OC-2A11800 1-1 x 8 splitter, symmetrical split ratio 1

D 24* C75768-000 FOSC-OC-3A11200 1-1 x 2 splitter, symmetrical split ratio 1

D 72* C70179-000 FOSC-OC-3A11400 1-1 x 4 splitter, symmetrical split ratio 1

D 72* 329536-000 FOSC-OC-3A11800 1-1 x 8 splitter, symmetrical split ratio 1

D 72* A69314-000 FOSC-OC-3A21400 2-1 x 4 splitter, symmetrical split ratio 1

D 72* A61669-000 FOSC-OC-3A21800 2-1 x 8 splitter, symmetrical split ratio 1

D 72* Grade 0Low Loss

Planar Technology

FO9895-000 FOSC-OC-3011G00 1-1 x 16 splitter, symmetrical split ratio 1

D 72* D31776-000 FOSC-OC-3011W00 1-1 x 32 splitter, symmetrical split ratio 1

D 72*

Grade PStandard

Planar Technology

CB9820-000 FOSC-OC-3P11400 1-1 x 4 splitter, symmetrical split ratio 1

D 72* E49835-000 FOSC-OC-3P11800 1-1 x 8 splitter, symmetrical split ratio 1

D 72* D39890-000 FOSC-OC-3P11G00 1-1 x 16 splitter, symmetrical split ratio 1

D 72* F58883-000 FOSC-OC-3P11W00 1-1 x 32 splitter, symmetrical split ratio 1

D 72* CB4800-000 FOSC-OC-3P21800 2-1 x 8 splitter, symmetrical split ratio 1

D 72* C73000-000 FOSC-OC-3P21G00 2-1 x 16 splitter, symmetrical split ratio 1

A "Black Box"

Grade AFused

Biconical Tapered

E45575-000 FOSC-OC-6A11200 1-1 x 2 splitter, symmetrical split ratio 1

A "Black Box" C74415-000 FOSC-OC-6A11400 1-1 x 4 splitter, symmetrical split ratio 1

A "Black Box" F54686-000 FOSC-OC-6A11800 1-1 x 8 splitter, symmetrical split ratio 1

A "Black Box" A10948-000 FOSC-OC-6A21400 2-1 x 4 splitter, symmetrical split ratio 1

A "Black Box" E42433-000 FOSC-OC-6A21800 2-1 x 8 splitter, symmetrical split ratio 1

A "Black Box" C74674-000 FOSC-OC-6A51200 1-5 x 2 splitter, symmetrical split ratio 1

A "Black Box" Grade PFused Planar

Tapered

D39498-000 FOSC-OC-6P11G00 1-1 x 16 splitter, symmetrical split ratio 1

A "Black Box" C75701-000 FOSC-OC-6P12G00 1-2 x 16 splitter, symmetrical split ratio 1

OC Splitter Kits

Trays with Single-mode Wideband Couplers/Splitters

Passives

Passives - Splitters

30

FOSC OC XC

oc Xc deScrIPtIon key

Tray Type 3 - FOSC-D-TRAY-72, splice modules in the middle of the tray 6 - FOSC-A-TRAY-24, “black box” concept 7 - 2 unit high FOSC-D tray with 12 connector patchpanel 8 - 1 unit high FOSC-D tray with 6 connector patchpanel

Coarse WDM components

Number of Outputs per Splitter12 4 8 A - 4 channels + upgrade portB - 8 channels + upgrade portC - 4 channels + upgrade + 1310 nm portD - 8 channels + upgrade + 1310 nm portE - 4 channels + 1310 nm portF - 8 channels + 1310 nm portG - 10 channels + 1310 nm portH - 2 channels + upgrade I - 2 channels + upgrade + 1310 nm portJ - 5 channels + upgrade + 1310 nm port K - 5 channels + upgradeL - 3 channels + upgradeN - 10 channels

TypeM - MultiplexingD - DemultiplexingX - Double demux (for 2 fiber system)Y - Double mux (for 2 fiber system)

7

FOSC OC - XC XX XX X XX

Connector typeNN - Not applicable

Connector typeMin. return loss SC FC E2000 LC MU50 db (UPC)* S1 F1 L1 U160 db (APC 8º)* S2 F2 E9 L260 db (APC 9º)* S3*UPC Ultra polished physical contact

*APC Angled polished physical contact

Channel Spacing/Sequence1 - 20 nm e.g. 1270,1290, 1310, ...2 - 40 nm e.g. 1270, 1310, 1350, ...0 - one channel only

Starting Wavelength27 1270 nm29 1290 nm

61 1610 nm

1

2

3

6

5

4

31

trayS wIth coarSe wavelength dIvISIon multIPleXIng/demultIPleX comPonentS (cwdm)

*Tyco Electronics SMOUV splice sleeves are highly recommended for use with these trays/modules.

FOSC Tray Type

Fiber Splice Tray

Capacity

Numberof

Channels

Up-grade port

1310 Part Number

Part NumberDescription

Detailed Description

A "Black Box" 1 A12093-000 FOSC-OC-6C1X470NN Double Demux 1470nm

A "Black Box" 1 D81777-000 FOSC-OC-6C1X490NN Double Demux 1490nm

A "Black Box" 1 A68278-000 FOSC-OC-6C1X530NN Double Demux 1530nm

A "Black Box" 1 F06637-000 FOSC-OC-6C1X550NN Double Demux 1550nm

A "Black Box" 1 C23974-000 FOSC-OC-6C1X570NN Double Demux 1570nm



A "Black Box" 2 D31817-000 FOSC-OC-6C2D471NN Demux 1470-1490nm

A "Black Box" 2 D81979-000 FOSC-OC-6C2D511NN Demux 1510-1530nm

A "Black Box" 2 C73118-000 FOSC-OC-6C2D551NN Demux 1550-1570nm

A "Black Box" 2 E48928-000 FOSC-OC-6C2D591NN Demux 1590-1610nm

A "Black Box" 2 x CB1790-000 FOSC-OC-6CHD511NN Demux 1510-1530nm

A "Black Box" 2 x CA9070-000 FOSC-OC-6CHD551NN Demux 1550-1570nm

A "Black Box" 2 x CA9071-000 FOSC-OC-6CHD591NN Demux 1590-1610nm

A "Black Box" 2 x CC4287-000 FOSC-OC-6CHX471NN Double Demux 1470-1490nm




A "Black Box" 4 CA6103-000 FOSC-OC-6C4D551NN Demux 1550-1610nm

A "Black Box" 4 x CB1808-000 FOSC-OC-6CAD471NN Demux 1470-1530nm

A "Black Box" 4 x CB1799-000 FOSC-OC-6CAD551NN Demux 1550-1610nm

A "Black Box" 4 x CA6417-000 FOSC-OC-6CAM511NN Mux 1510-1570nm

A "Black Box" 4 x CC3378-000 FOSC-OC-6CAX551NN Double Demux 1550-1610nm

A "Black Box" 4 x CB6702-000 FOSC-OC-6CAY471NN Double Mux 1470-1530nm

A "Black Box" 5 C27830-000 FOSC-OC-6C5D431NN Demux 1430-1510nm

A "Black Box" 8 CA6420-000 FOSC-OC-6C8D471NN Demux 1470-1610nm

A "Black Box" 8 x CC3676-000 FOSC-OC-6CBD471NN Demux 1470-1610nm

D 72* 1 CC2323-000 FOSC-OC-3C1X470NN Double Demux 1470nm

D 72* 3 CC7395-000 FOSC-OC-3C3R471NNAdd/Drop Redundant

1470-1530nm

D 72* 5 A67037-000 FOSC-OC-3C5X431NN Double Demux 1430-1510nm

D 72*" 4 x CC6143-000 FOSC-OC-3CAD551NN Demux 1550-1610nm

D 72* 8 x CC6140-000 FOSC-OC-3CBD471NN Demux 1470-1610nm

D 72* 4 x x E99683-000 FOSC-OC-3CCX471NN Double Demux 1470-1530nm

D 72* 8 x E98266-000 FOSC-OC-3CFD471NN Demux 1470-1610nm

D 6 connector 1 E46843-000 FOSC-OC-8C1X471S2 Double Demux 1470nm SC/APC

D 6 connector 1 E47122--000 FOSC-OC-8C1X611S2 Double Demux 1610nm SC/APC

FOSC-OC-XC CWDMs

NOTE: One tray kit per package.

Passives - WDM’s

32

groundIng acceSSorIeS

Part Kits per Number Description Kit contents: Pkg.

A33560-000 FOSC-ACC-450-FIBRGRD-KIT Groundwire and associated hardware 5 to add 1 ground to any FOSC 450 closure

449105-000 FOSC-ACC-MULT-EXT-GRND-3 Groundwire and associated hardware 5 to add up to 3 grounds to any FOSC 450 closure

671575-000 FOSC-ACC-MULT-EXT-GRND-6 Groundwire and associated hardware 5 to add 6 grounds to any FOSC 450 closure A11796-000 FOSC-ACC-450-COM-GRD-A Groundwires (alligator clip one end, 5 eyelet on other) and bonding braid to bond up to 6 cables together

D46439-000 FOSC-ACC-450-COM-GRD-B Groundwires (eyelets on each end 5 ...for use with B-Bonds) and bonding braid to bond up to 6 cables together

• Add grounding to ungrounded/non-grounded feed-through closures• Add additional grounding to grounded closures

Grounding Accessories

33

AdditionalFOSC Fiber Optic Splice Closures

other foSc cloSure ProductS

FOSC 450 fiber optic splice slosures is just one of several families of FOSC closures that connect, protect and seal the fiber optic network.

The information that follows is some of the other closure families or closure products for your fiber network.

34

FOSC 400 Closures

Similar to the 450 family, this is a family of single ended (butt) style fiber optic splice closures utilizing heat shrink cable sealing rather than gel. Other features are removable dome, hinging splice trays and a range of sizes and styles to choose from.

FOSC 500 Closures

The smallest of the FOSC closure family, the 500 uses gel sealing and can be configured for butt or inline splicing. Slack storage is limited to bare fibers, and has a twenty-four single splice capacity.

FOSC 600 Closures

The largest of the FOSC closure family, 600 fiber optic splice closures are a great fit for applications such as large cable splicing in the network backbone, consolidating a large number of cables and splices, or rehabilitating failed closures.

AIR FOSC Closures

This free breathing closure is designed for aerial applications and provides either taut sheath or inline (with slack) splicing. The rodent resistant body and FOSC style trays provide an easy way to connect, protect and distribute fiber and fiber cables.

Gator 12F Gel Splice Closure

Tyco Electronics introduces a small splice closure designed for splicing two flat drop style cables.• Small enough to fit into “flower pot” size hand holes• Accommodates up to 12 single fibers, 12 ribbonized fibers, or one 12 fiber ribbonFor additional information, feel free to contact your local area sales representative or visit our web site.

FOSC Closure Family

35

Engineering Information

engIneerIng InformatIon

In the following section you will find dimensional and assembly information and drawings related to FOSC 450 fiber optic splice closures and accessories. Additional information may be available upon request.

36

Drawing Key1. Dome 2. Clamp3. Base4. Trigger

Closure Size (Dimensions in inches) A BS B6 C6 D6

Total closure length (excl. get trigger) 19 19 24 23 30

Closure outer diameter, including clamp 8 9.2 9.8 11.5 11.5

Cable port dimensions (Dimensions in inches)

Number round cable ports 4 6 6 6 6 cable diameter range .30 -.87 .35-1 .35-1 .35-1 .35-1 (2X) .39 -1.10 (2X)

Gel-Block Profiles

4

3

p

21

D

L

D

450 BS, B6, C6, D6450 A

cloSure dImenSIonS

37

450 A

Shown with 2 standard splice trays and tall version slack basket

450 BS

Shown with 6 standard splice trays and tall version slack basket

450 B

Shown with 6 standard splice trays and standard version slack basket

450 D

Shown with 6 standard splice trays and standard version slack basketNOTE: FOSC 450 C closure is not shown, but will replicate the D size with the exception of shorter trays, basket, and dome.

Note: The above drawings are not to scale

FOSC 450 Closure Family Assembly Drawings

38

Fig. xx: FOSC Splice Tray Fitting MatrixSPlIce tray dImenSIonS

Fits the following closure sizes:

Tray FiberCapacityVersionsAvailable

Nominal Tray Dimensions(inches, hinge not included)

Tray SizesFOSC400

FOSC450

FOSC500

FOSC600

AIRFOSC

Single Mass (L x W x H)

A A4, A8 A4, BS N/A N/A A 12, 24 72 9 1/8 x 3 7/8 x 7/16

B B2, B4 B6 N/A N/A B 12, 24 72 12 x 3 7/8 x 7/16

C C5 C6 N/A N/A N/A 12, 24 144 7 1/2 x 5 7/8 x 7/16

D D5 D6 N/A C or D N/A 36, 72, 96 288 15 x 5 7/8 x 7/16

A/BRibbon

A4, A8,B2, B4

A4, BS, B6 N/A N/A A & B N/A 144 9 1/8 x 3 7/8 x 1

CRibbon

C5 C6 N/A N/A N/A N/A 216 7 1/2 x 5 7/8 x 1

DRibbon

D5 D6 N/A C or D N/A N/A 288 15 x 5 7/8 x 1

Splice Tray Dimensions

Clo

sure

FO

SC

400

FO

SC

450

F

OS

C 5

00

F

OS

C 6

00

AIR

FO

SC

Typ

e/S

ize

D5

C5

B2

B

4 A

4

A8

D6

C6

B6

BS

A

4 A

A

D

C

A /

B

Clo

sure

Siz

e1 (in

ches

) 11

.5 d

ia. 3

1 L

11.5

dia

. 23

L 8

dia.

25

L 8

dia.

19.

5 L

11.5

dia

. 30

L 11

.5 d

ia. 2

3 L

9.8

dia.

24

L 9.

2 di

a. 1

9 L

8 di

a. 1

9 L

19 L

x2.5

x5

33 L

x10x

11

33 L

x6x1

1 29

.5/3

7 Lx

6x5

App

rox.

Clo

sure

Wei

ghts

(lbs

) 16

12

8

6

20

16

13

10

6

5 31

30

22

/15

Clo

sure

Cap

acity

En

d-to

-End

Si

ngle

Spl

ice

(SM

6 M

odul

es)

288

96

48

24

48

28

8 96

72

72

48

24

2 32

4 18

0 48

Si

ngle

Spl

ice

(SM

12 M

odul

es)12

57

6 19

2

96

48

96

576

192

144

144

96

242

648

/ 86

42 3

60 /

4802

96

Mas

s Fu

sion

Spl

ice

1152

86

4

144

n/

a

144

1152

86

4 28

8 14

4 14

4 n/

a 17

28

864

288

Mid

-She

ath

Si

ngle

Spl

ice

432

192

96

48

96

57

6 19

2 14

4 14

4 72

24

86

4 48

0 96

M

ass

Fusi

on S

plic

e 86

4 43

2

144

n/

a

144

864

432

288

288

216

n/a

1728

86

4 28

8

Tray

s Pe

r Clo

sure

St

anda

rd T

rays

8

/ 65 /

56 8

/ 65 /

56

44

25 4

4 /35 /2

6 8

/ 65 /

56 8

/ 65 /

56 6

/ 65 /

46 6

/45 / 2

6 26 /

35 / 44

1 9

5 4

R

ibbo

n Tr

ays

43 4

25

15

15 43

4 25

2 15

n/a

53 313

n/

a11

Sing

le F

iber

Spl

ice

C

apac

ity p

er T

ray

SM

6 M

odul

es

36

12

12

12

12

12

36

12

12

12

12

n/a

36

36

12

SM12

Mod

ules

12

72

24

24

24

24

24

72

24

24

24

24

n/a

72

72

24

FIST

Mod

ules

12

96

n/a

n/a

n/

a n/

a

n/a

96

n/a

n/a

n/a

n/a

24

96

96

n/a

Patc

hing

Tr

ay (q

uant

ity/ty

pe)

Yes

No

N

o

No/

No

N

o/N

o Ye

s N

o Ye

s N

o N

o N

o Ye

s Ye

s N

o

(12/

sc)

(1

2/sc

)

(12/

sc)

(1

2/sc

) (1

2/sc

)

Bask

et (q

uant

ity/ty

pe)

Yes

No

Ye

s

Ye

s

Yes

No

Yes

Yes

Yes

No

No

No

No

(4

/all,

8/s

c)

(4

/all,

8/s

c)

(4/a

ll, 8

/sc)

(4

/all,

8/s

c)

(4

/all,

8/s

c)

(4/a

ll, 8

/sc)

(4

/all,

8/s

c)

Seal

ing

Syst

em

C

losu

re D

ome-

to-B

ase

or

“O” R

ing/

“O

” Rin

g/

“O” R

ing/

“O

” Rin

g/

“O” R

ing/

“O

” Rin

g/

“O” R

ing/

“O

” Rin

g/

“O” R

ing/

D

ry G

aske

t D

ry G

aske

t D

ry G

aske

t Br

eath

able

Top-

to-B

otto

m

Cla

mp

Cla

mp

Cla

mp

C

lam

p

Cla

mp

Cla

mp

Cla

mp

Cla

mp

Cla

mp

Cab

le C

apac

ity

Butt

(std

./max

.) 7

/ 129

7 / 1

29 4

/ 89

6

/ 109

69

109

6 /

167 /

218

6 /

167 /

218

6 /

167 /

218

6 /

167 /

218

4 / 1

07 / 13

8 2

8 / 1

67 / 20

8 8

/ 167 /

208

n/a

In

line

(std

./max

.) n/

a n/

a

n/a

n/a

n/

a n/

a n/

a n/

a n/

a 4

12 /

207 /

248

12 /

207 /

248

up to

12

Fire

Ret

arda

nt

Yes

No10

Yes

No10

No10

N

o10

No10

N

o10

No10

N

o N

o N

o N

oC

losu

re A

vaila

ble

(400

-D5/

FR)

(4

00-D

5/FR

)

Tool

s R

equi

red

CV-

1981

Hot

C

V-19

81 H

ot

C

V-19

81 H

ot

CV-

1981

Hot

C

an W

renc

h,

Can

Wre

nch,

C

an W

renc

h,

Snip

s C

an W

renc

h 1/

2" N

ut

1/2"

Nut

1/

2" N

ut

1/2"

Nut

Ai

r Gun

, Pow

er

Air G

un, P

ower

A

ir G

un, P

ower

A

ir G

un, P

ower

Sn

ips

Snip

s Sn

ips

Sn

ips

Driv

er,

Driv

er,

Driv

er,

Driv

er

Sc

rew

driv

er

Scre

wdr

iver

Sc

rew

driv

er1 C

losu

re le

ngth

(“L”

) plu

s 10

X la

rges

t cab

le d

iam

eter

inst

alle

d eq

uals

the

over

all le

ngth

requ

ired

for h

andh

ole.

M

axim

um d

imen

sion

s in

clud

es c

lam

p an

d ca

ble

seal

ing.

2 Tray

s co

nfig

ured

with

FIS

T st

yle

splic

e m

odul

es p

rovi

de 9

6 si

ngle

spl

ice

capa

city

- FO

SC 4

00 D

5 an

d 45

0 D

6 cl

osur

es c

an a

lso

acco

mm

odat

e FI

ST s

tyle

mod

ules

(SM

OU

V sp

lice

prot

ectio

n sl

eeve

s m

ust b

e us

ed)

3 The

ribbo

n tra

y ca

n al

so b

e co

nfig

ured

with

12

SC a

dapt

ers

for p

atch

ing

and

prov

ide

12 s

ingl

e sp

lice

capa

city.

4 In a

dditio

n a

sock

can

be

used

for L

BT s

tora

ge.

5 With

sta

ndar

d ba

sket

.6 W

ith ta

ll bas

ket.

7 If us

ing

the

FOSC

-AC

C-4

50-M

ULT

IDR

OP-

3 ki

t, 3

flat

or 3

roun

d ca

bles

per

por

t if c

able

doe

s no

t exc

eed

<0

.25”

dia

met

er8 If

usin

g th

e FO

SC-A

CC

-450

-MU

LTID

RO

P-4

kit a

nd c

ombi

ned

cabl

es d

o no

t exc

eed

1” d

iam

eter

.

9 Mul

tiple

cab

les

per p

ort c

an b

e in

stal

led

(usi

ng S

CO

P or

bra

nch-

off c

lip) i

f cab

le d

iam

eter

s do

not

ex

ceed

por

t dia

met

er.

10Fi

re R

etar

dant

bag

or b

lank

et o

ptio

ns.

11R

ibbo

n/m

ass

fusi

on c

an b

e do

ne b

ut s

lack

is p

ulle

d ba

ck in

to th

e sl

ack

area

und

er th

e tra

ys.

12SM

OU

V sp

lice

prot

ectio

n sl

eeve

s m

ust b

e us

ed.

13FO

SC 6

00 C

clo

sure

use

s “D

” siz

e sp

lice

trays

FO

SC

Fib

er

Op

tic S

plice

Clo

sure

sQ

uiC

K r

eF

er

en

Ce

gu

ide

GE

L C

AB

LE S

EA

LIN

GH

EAT

-SH

RIN

K C

AB

LE S

EA

LIN

G B

RE

ATH

AB

LE

C

losure size (inches)A4 - 4 round ports; 8 dia. x 19 longBS - 6 round ports; 9 dia. x 19

1/2 longB6 - 6 round ports; 10 dia. x 24 longC

6 - 6 round ports; 111/2 dia. x 23 long

D6 - 6 round ports; 11

1/2 dia. x 30 long

Num

ber of cable ports for which

termination hardw

are is provided2 -

2 cable attachments included

4 - 4 cable attachm

ents included6 -

6 cable attachments included

Capacity (or type) of splice tray

12 - A, B, or C tray w

/two SM

6 splice modules

24*- A, B or C tray w

/two SM

12 splice modules

36 - D tray w

ith six SM6 splice m

odules72*- D

tray with six SM

12 splice modules

R1 - A, B size ribbon tray (accom

modates

12 ribbons/144 fibers)R

2 - D size ribbon tray (24 ribbons/288 fibers)

R3 - C

size ribbon tray (18 ribbons/216 fibers)SF - Stackable single fusion trays (12 splices)N

T - No trays

*Note: SM

OU

V (1120-01-US) splice protection sleeves

should be used with SM

12 splice modules.

Num

ber of trays pre-installed0 or 1 is standard

Closure size (C

or D)

Num

ber of cable ports provided (4, 6, 8) 4 - one 4-port gel block6 - tw

o 3-port gel blocks8 - tw

o 4-port gel blocks

Configuration

B - ButtI - In-lineR

- Reverse Butt*

Capacity (or type) of splice trays

Note: Both “C

” and “D” closures use “D

” size trays

36 - D tray w

ith six SM6 m

odules72 - D

tray with six SM

12 modules 96

R2 - R

ibbon tray (24 x 12 splice capacity)N

T - No trays

FOSC

600 - X X X - XX - X - X X XA

IR-FO

SC - X - XXX - XX - X X X

Closure size

A or B

StyleG

EN - G

enericTSH

- Taut Sheath (B closure only)

Tray style12 - Splice capable

(standard tray style)24 - Splice capable (standard tray style)N

T - No tray

Num

ber of trays0 or 1 is standard

Grounding

G - G

roundingN

- No ground

Miscellaneous

S - Standard hanger bracketX - Adjustable hanger bracket

FOSC

400 Closure

FOSC

450 Closure

Closure size (inches)

A - 8 dia. x 191/2 long

B - 8 dia. x 25 longC

- 111/2 dia. x 23 long

D - 11

1/2 dia. x 31 long

Cable entry ports (in addition to

oval ports which is included w

ith each kit)2 - B closure only4 - A and B closures only5 - C

and D closures only

8 - A closure only

Capacity (or type) of splice tray

12 - A, B, or C tray w

/two SM

6 splice modules

24*- A, B or C tray w

/two SM

12 splice modules

36 - D tray w

ith six SM6 splice m

odules72*- D

tray with six SM

12 splice modules

R1 - A, B size ribbon tray (accom

modates 12

ribbons/144 fibers)R

2 - D size ribbon tray (24 ribbons/288 fibers)

R3 - C

size ribbon tray (18 ribbons/216 fibers)SF - Stackable single fusion trays (12 splices)N

T - No trays

*Note: SM

OU

V (1120-01-US) splice protection sleeves

should be used with SM

12 splice modules.

FOSC

400 - XX - XX - X - XXXFO

SC 450 - XX - X - XX - X - XXX

Valve for flash testV - Yes (standard)N

- No Valve

Ground feed-through lugs

0 - No grounding

1 - 1 ground feed-through lug (A4 only)3 - 3 ground freed-through lugs

(B6, C6 and D

6 closures only)6 - 6 ground feed-through lugs

(C6 and D

6 closure only)N

ote: FEG & M

EG kits provide optional ground

isolation for FOSC

450 closures.

Slack Basket type

N - N

o BasketA - A4 Standard SizeB - B6, BS Standard SizeC

- C6 Standard Size

D - D

6 Standard SizeE - Special Bulkhead Basket arrangem

ent

for B, BS closures onlyT - Tall Size S - Stackable Trays in D

Closure

Note: D

-size closures with “N

” option include backbone used to route ribbons to ribbon trays. B-size closures include storage “sock”.

Valve for flash-test (V for valve is standard)


(0, 2 or 4) Slack B

asket type C

- Basket for C version

D - Basket for D

versionN

- No basket

L - Loose buffer tube ribbon m

odification (D size only)

No basket included.

M - Sam

e as “L” above, but includes storage basket.

Num

ber of splice trays 0 or 1 is standard

* For use when increased fiber lengths

on tray is required and loose buffer tube cable reverse point is offset in m

ain cable opening.

Splicing tray S24 - Splicing tray to hold 24 SM

OU

V

splice protectors (45mm

)L24 - Splicing tray to hold 24 SM

OU

V

splice protectors (60mm

)

Cable type

LT - Loose tube cable

CC

- C

entral core cable


G -

Grounding

N -

None

Valve for flash testV -

With valve

N -

No valve FO

SC-500A

A- XXX - XX - X X

FOSC

500 Closure

Valve for flash testV - ValveN

- No Valve


G - G

roundingN

- None

Cable blocking com

ponentsB - BlockingN

- None

Num

ber of splice trays0 or 1 is standard

FOSC

600 Closure

A

IR FO

SC C

losure FOSC

Splice Closure Tray G

uide

Tray Fiber

Nom

inal Tray Fits the follow

ing closure sizes:

Capacity

D

imensions

FOSC

FO

SC

FOSC

FO

SC

Tray Size

Single M

ass (L x W

x H)*

400 450

500 600

AIR

FOSC

FOSC

A 12, 24

72 9 1/8 x 3 7/8 x 7/16

A4, A8 A4, BS

N/A

N/A

AIR FO

SC A

FOSC

B 12, 24

72 12 x 3 7/8 x 7/16

B2, B4 B6

N/A

N/A

AIR FO

SC B

FOSC

C

12, 24 144

7 1/2 x 5 7/8 x 7/16 C

5 C

6 N

/A N

/A N

/A

FOSC

D

36, 72, 96 288

15 x 5 7/8 x 7/16 D

5 D

6 N

/A C

or D

N/A

FOSC

A/B Ribbon

N/A

144 9 1/8 x 3 7/8 x 1

A4, A8, A4, BS,

N/A

N/A

AIR FO

SC A,

B2, B4 B6

AIR FO

SC B

FOSC

C R

ibbon N

/A 216

7 1/2 x 5 7/8 x 1 C

5 C

6 N

/A N

/A N

/A

FOSC

D R

ibbon N

/A 288

15 x 5 7/8 x 1 D

5 D

6 N

/A C

or D

N/A

*inches, hinge not included

Or

de

rin

g in

FO

rM

AT

iOn

©2004 - 2008 Tyco Electronics Corporation. All rights reserved.1654571 F429.09/08

Tyco Electronics Corporation8000 Purfoy RoadFuquay Varina, NC 27526-9349Tel: 919-557-8900Fax: 919-557-8498www.tycoelectronics.comwww.telecomosp.com

FOSC 400, FOSC 450, FOSC 500, FOSC 600, AIR FOSC, GATOR, TE logo, and Tyco Electronics are trademarks. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, Tyco Electronics makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco Electronics’ Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of Tyco Electronics products should make their own evaluation to determine the suitability of each such product for the specific application.

fosc 450 ordering guide

Documents

fosc closure family

closure sizes fosc

size fosc

closure dimensions

slack storage splice

splice capacities

cable sealing accessories

size splice trayscapacity