ford 3000 technical drawings - centers for disease …
TRANSCRIPT
Cost-effective Rollover Protective Structure (CROPS)
for Wheeled Agricultural Tractors
Ford 3000 SERIES
TECHNICAL DRAWINGS
Note: “Left” and “Right” refer to the tractor operators’ left or right as they sit in the seat looking forward.
DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention National Institute for Occupational Safety and Health
Ford 3000 Page �
This document is in the public domain and may be freely copied or reprinted.
Disclaimer Mention of any company or product does not constitute endorsement by the National Institute for Occupational Safety and Health (NIOSH). In addition, citations to Web sites external to NIOSH do not constitute NIOSH endorsement of the sponsoring organizations or their programs or products. Furthermore, NIOSH is not responsible for the content of these Web sites. All Web addresses referenced in this document were accessible as of the publication date.
Ordering InformationTo receive documents or other information about occupational safety and health topics, contact NIOSH at
Telephone: �–800–CDC–INFO (�–800–�3�–4636) TTY: �–888–�3�–6348 E-mail: [email protected]
or visit the NIOSH Web site at www.cdc.gov/niosh.
For a monthly update on news at NIOSH, subscribe to NIOSH eNews by visiting www.cdc.gov/niosh/eNews.
Ford 3000 Page �
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Parts
Part #11 (Backside)
Part #9
Part #8
Driver’s Left Side
Part #6L Part #12
Part #10
Driver’s Right Side
Part #6R
Part #1
Part #5
Part #3 Part #2
Part #7
Part #4
Ford 3000 Page 3
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Fasteners 3/4 - 16 x 7.5"
(B4, W2, N2)
3/4 -16 x 5" (B3, W2, N2)
Driver's Left Side
3/4 - 16 x 4" (B2, W2, N2)
5/8 - 18 x 1.75" (B1, W1, N1)
5/8 - 18 x 1.75" (B1, W1, N1)
5/8 - 18 x 7.8" (B7, W1, N1)
5/8 - 18 x 1.25" (B5, W1,W4)
5/8 - 18 x 7.5" (B6, W1, W4)
Installed from the bottom of the Axle (2 per side)
3/4 - 16 x 4" (B2, W2, N2)
3/4 - 16 x 7.5" (B4, W2, N2)
3/4 -16 x 5" (B3, W2, N2)
Driver's Right Side
3/4 - 16 x 4" (B2, W3, W2, N2)
3/4 - 16 x 4" (B2, W2, N2)
3/4 - 16 x 4" (B2, W3, W2, N2)
Ford 3000 Page 4
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #1
3
8
12
15 8
37 8
45 8
5
15 8
63 8615
16 63 8
3 4 THRU
4 THRU
5/8-18 UNF - 1B 5/8-18 UNF - 1B
5/8-18 UNF - 1B 5/8-18 UNF - 1B
5
53 4
1 2
2 101
4
12 111
2
113 32
Top Right Axle BracketRev 8/19/2011 EAM
1 2
11 16 THRU
113 16
53 4
11 16
4
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
R13 32
Ford 3000 Page �
CROPS Technical Drawings, Ford 3000 Series
5
1 2
5
1 2
11 16
615 16
12
15 8
63 8
11 8
33 8
5 5/8
33 8
21 4
11 8
41 2
5
Ford 3000 Part #2 Bottom Right Axle Bracket
Rev 8/19/2011 EAM
3 4 THRU
(4 holes)
12
3
5
2 13
16 THRU
3
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page 6
Ford 3000 Part #3
13 4
10 12
1
11 2
21 2
16 THRU
113 16
13 32 2 3/32
Top Left Axle Bracket11 Rev 8/19/2011 EAM
R13 32
5/8-18 UNF - 1B
5/8-18 UNF - 1B 1
53
2
4
5/8-18 UNF - 1B
1 2 3
4 THRU 5/8-18 UNF - 1B
5
5
4 11
8
17 8
41 8
51 16
55 8
103 8
1015 16
55 8
103 8
3 4 THRU
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Page �
CROPS Technical Drawings, Ford 3000 Series
51 16
1015 16 12
55 8
103 8
11 8
33 8
3 4 THRU
3 4 THRU
3 4 THRU
Ford 3000 Part #4 Bottom Left Axle Bracket
Rev 8/19/2011 EAM
3 4 THRU
(4 Holes)
1 2
5 1 2
5
3
5 2
13 16 THRU
3
9
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page 8
14
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #5 Vertical Tube Bolted Brace
Rev 8/19/2011 EAM
2"x3/8" steel plate
2
3 8 11
16 THRU 11 16 THRU
1 13
14
1 2
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page �
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #6
A
Vertical Tube Rev 8/19/2011 EAM
13 16 THRU
13 16 THRU
DETAIL A SCALE 1 / 4
1
11 2
9
2
DETAIL B SCALE 1 / 5
2"x3"x3/16" ASTM A500 tubing
11 2
71 8
11 2
13 16 THRU
Weld Part #12 at 16.00" from bottom edgeof Part 6 to the bottom edge of Part 12 with the flat portion toward the wheel of the tractoroffset 3/8"toward the tractor.(See Part #6R and #6L Drawings)
13 16 THRU
3
2 B
63
Units = Inches: ASTM A500 Tubing
Ford 3000 Page �0
CROPS Technical Drawings, Ford 3000 Series
Units = Inches: A
STM A
500 Tubing
DETAIL
D
SCALE 1 / 4
D
16
0.375
16
3
63
44
B (see A)
A (Continuous w
eld
No W
eld
No W
eld
Part #12
Ford 3000 Part #6R
Right V
ertical TubeR
ev 8/19/2011 EAM
Ford 3000 Page ��
CROPS Technical Drawings, Ford 3000 Series
E
Units = Inches: A
STM A
500 Tubing
No W
eld
A (Continuous
16 3 8
B (see A) W
eld)
Part #12 N
o Weld D
ETAIL E
SCALE 1 / 4
Ford 3000 Part #6L
Left Vertical Tube
Rev 8/19/2011 EA
M
16
3 44
63
Ford 3000 Page ��
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #7 Bottom Vertical Tube Backing Plate
Rev 8/19/2011 EAM
85 8
3"x3/8" steel plate
3 3
3 8 13
16 THRU 13 16 THRU
11 2
71 8
85 8
11 2
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page �3
10
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #8 Cross Bar Backing Plate
Rev 8/19/2011 EAM
2"x3/8" steel plate
3
3 8 13
16 THRU 13/16 THRU
1
9 10
3 11
2
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page �4
CROPS Technical Drawings, Ford 3000 Series
33 3/4
Ford 3000 Part #9 Cross Bar
Rev 8/19/2011 EAM
2"x3"x3/16" ASTM A500 tubing
3
2 1 9
243 4
323 4
333 4
11 2
3 13
16 THRU
13 16 THRU
13 16 THRU
13 16 THRU
8 153 4 8
Units = Inches: ASTM A500 Tubing
Ford 3000 Page ��
12
12
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #10 Corner Plate
Rev 8/19/2011 EAM
3 8 11
2
9 12
1
9
12
13 16 THRU
8
71 2
13 16 THRU
13 16 THRU
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page �6
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #11 TopVertical Tube Backing Plate
Rev 8/19/2011 EAM
101 2
13 13
16 THRU
2
3 8
16 THRU
11 2 71
2 11 2
101 2
1 1
9
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page ��
CROPS Technical Drawings, Ford 3000 Series
Ford 3000 Part #12 Vertical Tube Welded Brace
Rev 8/19/2011 EAM
3 17 8
3 16
11 4
3
11 4
3 8
215 64
1
22° 112°
3 16
3 Thru4
3 8
3 8
11 211
2
11 4
13 4
3
Units = Inches: A572-Grade 50 Plate (or A36 Min Yield of 50)
Ford 3000 Page �8
Delivering on the Nation’s promise: Safety and health at work for all people through research and prevention
To receive documents or other information about occupational safety and health topics, contact NIOSH at
Telephone: �-800-CDC-INFO (�-800-�3�-4636) TTY: �-888-�3�-6348 E-mail: [email protected]
or visit the NIOSH Web site at www.cdc.gov/niosh.
For a monthly update on news at NIOSH, subscribe to NIOSH eNews by visiting www.cdc.gov/niosh/eNews.
Ford 3000 Page ��