for microsoft surface - ergotron · 2019-11-06 · 888-97-400-g-00 rev. d • 08/19 1 of 16 tandem...
TRANSCRIPT
1 of 16888-97-400-G-00 rev. D • 08/19
Tandem Tablet Holderfor Microsoft Surface
www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected]
User Guide
2 of 16 888-97-400-G-00 rev. D • 08/19
A B C D
1
2
3
4
5
6
7
M4 x 10mm
2x
6x
< 3 lbs. (1.3 kg)
1x
1x
60°
1x2.5mm
1x
M4 x 10mm4x
M4 x 24mm
4x
1x
2" - 4" (50mm - 101mm)
.36" - .90" (9mm - 20mm)
10.5" - 12" (260mm - 300mm)
7.3" - 9.5" (180mm - 240mm)
1x 1x
M4 x 8mm12x
1x
1x
1x4mm
<6" (152mm)
<12.5" (317mm)
5.5" (140mm) 2"
(55mm)
4.5" (115mm)
Components
Features & Specifi cations
Range of MotionSide View
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
Weight Capacity
Min-Max Monitor Dimensions Min-Max Tablet Dimensions
Docking Station Dimensions
3 of 16888-97-400-G-00 rev. D • 08/19
1 1x
M4 x 10mm4x
TABLETBEAM DIRECTION
MONITOR BRACKET
BEAM
DIRECTIO
N
MO
NITO
R BRA
CKET
2.5mm
BEAM DIRECTION
MONITOR BRACKET
BEAM
DIRECTIO
N
MO
NITO
R BRA
CKET
1x
M4 x 24mm4x2.5mm
1x
NOTE: Align the arrows on the mounting bracket with the placement of the tablet mount.
Side Mounted Bottom Mounted
Attach mounting brackets to back of monitor.
Optional Extender
4 of 16 888-97-400-G-00 rev. D • 08/19
2 1x
b
a
b
a
2.5mm
M4 x 8mm2x
Attach mounting brackets to back of monitor.
Side Mounted Bottom Mounted
5 of 16888-97-400-G-00 rev. D • 08/19
3M4 x 8mm
2x2.5mm
1x
4 M4 x 8mm2x
a
b
a
b
2.5mm
Attach plate to tablet holder.
Slide tablet holder into mounting bracket.
Side Mounted Bottom Mounted
6 of 16 888-97-400-G-00 rev. D • 08/19
2.5" - 3.18" (64mm - 81mm)
a
b
c
3.25" - 4" (82mm - 101mm)
2.75" - 3.5" (70mm - 90mm)
2" - 2.7" (50mm - 69mm)
2.5mm
a
b
c
d
5 Adjust for monitor thickness.
7 of 16888-97-400-G-00 rev. D • 08/19
b
c
6
7M4 x 10mm
2x
2.5mm
a Tighten screw to clamp to monitor.
Attach front cover.
Optional: Attach hook if side mounted.
Secure monitor tablet holder to monitor.
Remove front cover.
8 of 16 888-97-400-G-00 rev. D • 08/19
8 1xM4 x 8mm
4x
b
b
2.5mm
a a
Attach to arm.
NOTE: Attach arm on side closest to tablet holder for proper balance.
Side Mounted Bottom Mounted
9 of 16888-97-400-G-00 rev. D • 08/19
c c
d d
Side Mounted Bottom Mounted
10 of 16 888-97-400-G-00 rev. D • 08/19
9 M4 x 8mm2x1x
a
b
a
b
2.5mmAttach Surface Dock holder
Side Mounted Bottom Mounted
11 of 16888-97-400-G-00 rev. D • 08/19
10a
b
c
Insert tablet.
12 of 16 888-97-400-G-00 rev. D • 08/19
11
12a
b
How to remove tablet.
Optional: Tighten thumb screw to secure tablet.
13 of 16888-97-400-G-00 rev. D • 08/19
13 2.5mm
a
b
c
Install Surface Dock
14 of 16 888-97-400-G-00 rev. D • 08/19
14a
b
Cable management.
15 of 16888-97-400-G-00 rev. D • 08/19
15
16
4mm
Adjustment StepMake sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or diffi cult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.
Increase FrictionIf this product moves too easily, then you'll need to increase friction:
Decrease FrictionIf this product is too diffi cult to move, then you'll need to decrease friction:
Adjustment StepAdjust your mounting solution to handle the added weight. Adjustments should move smoothly and easily through the full range of motion and stay where you set it. If adjustments are diffi cult and do not stay in the desired position, follow the instructions to loosen or tighten the tension to create a smooth, easy adjustment motion. Depending on your product and the adjustment, it may take several turns to notice a difference.
16 of 16 888-97-400-G-00 rev. D • 08/19
© 2015 Ergotron, Inc. All rights reserved.
www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected]
NOTE: When contacting customer service, reference the serial number.For local customer care phone numbers visit: http://contact.ergotron.comFor Service visit: www.ergotron.comFor Warranty visit: www.ergotron.com/warranty
Learn more about ergonomic computer use at: www.ergotron.com/ergonomics