footpegs & foot controls - custom bikes by mike 3.pdf · apparel bike kits & trailers seats...

For the Dealer Nearest You, Call: 800-729-3332

Footpegs & Foot Controls

33

Footpegs &

Foot C

ontrols

3.02

Forward Control Kits

3

Prices appearing in this catalog are Suggested Retail Price and are subject to change*

‘Tribal’ Forward Controls by Accutronix®

These unique forward controls feature a one-of-a-kind custom look that adds the finishing touch to your cus-tom bike. Machined from aerospace grade 6061 T6 aluminum with a show-chrome finish and a 5/8"-diametermaster cylinder bore. These controls also contain sealed bearings for superior performance and durability.Adjustable brake and shift assemblies for optimum riding comfort. Includes shift rod and mounting hardware.Master cylinder bore diameter measures 5/8".644040 Fits all Softail® models from 2000 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,097.95

Note: Kickstand installation requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket.

Optional Matching ‘Tribal’ Grips and Footpegs644041 Male mount passenger footpegs (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$162.88

644042 Handlebar grips (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.95

‘Diamond’ Forward Controls with ‘Knurled’ Pegs by Accutronix®

These chrome billet forward controls feature a smooth bend in the shift and brake lever for that contoured look.Topped off with beautiful ‘knurled’ toe peg and footpegs. These controls also contain sealed bearings for superi-or performance and durability. No more worry about pegs and/or levers coming loose. The brake and shift leversare adjustable for optimum riding comfort. Includes shift rod and all mounting hardware. Master cylinder borediameter measures 5/8". Matching ‘knurled’ rear pegs and hand grips are available.660150 Fits all Softail® models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$959.30

660151 Without kickstand mount for all Softail® models from 1984 thru 1999 (for models that mount the kickstand behind the primary to provide a clean flush finish) . . . . . . . . . . . . . . . . . . . . . . .$959.30

660152 3" extended forward controls for all Softail® models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . .$959.30

660153 Fits all Softail® models from 2000 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$959.30

660154 3" extended forward controls for all Softail® models from 2000 to present . . . . . . . . . . . . . . . . . . . . . . . . . .$959.30

Note: Custom brake lines are required.Note: Kickstand installation on 2000 and later Softail® models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket.Note: Installation on 1984 thru 1986 Softail® models requires relocation of the oil filter.

Optional Matching Grips and Footpegs656692 ‘Knurled’ rear pegs (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$128.60

656690 ‘Knurled’ hand grips (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.55

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline

Wheels,Tires & Brakes

Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.03



‘Elite’ Slotted Forward Controls for Softail® Models by AccutronixElite chrome forward controls have a soft double bend forgreat looks and sealed bearings for great performance.Adjustable brake and shift assemblies for optimum riding comfort. Comes slotted with rubber pegs. . . . . . . . . . . . . . .$936.9944595 Fits all Softail® models from 1984 thru 1999

and custom frames44596 Fits Softail® models from 2000 to presentNote: Custom brake lines are required.Note: Kickstand installation on 2000 and later Softail® models requires theadditional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstandmounting bracket.Note: Installation on 1984 thru 1986 Softail® models requires relocation of the oil filter.

Passenger FootpegsMatching male mount passenger footpegs to complement the forward controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$128.9944498 Sold in pairs

Slotted ‘Shorty’ Forward Controlsfor Softail®Models by AccutronixChrome billet forward controls sit 2" back compared to stockcontrols. Adjustable brake and shift assemblies for optimumriding comfort. Comes slotted with rubber pegs. . . . . . .$924.6944592 Fits all Softail® models from 1984 thru 1999

and custom modelsNote: Custom brake lines are required. Installation on 1984 thru 1986 Softail®models requires relocation of the oil filter.

Passenger FootpegsMatching male mount passenger footpegs to complement the forward controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$128.9944498 Sold in pairs

44523Slotted

44498

44571Ball Milled

Chrome Billet Forward Controls by Accutronix®

These top-quality, American-made forward controls are machined from aerospace grade6061-T6 aluminum. Features include splined shafts for complete adjustability, and sealedroller bearings. Kits come complete with shift rods, brake rods and mounting hardware.

For FX Softail® Models from 1984 thru 1999Engineered to mount in the stock position on FXST, FXSTC and FXSTS models. Uses theOriginal Equipment master cylinder (not included).Standard Length

44501 Ball milled style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$739.95

44502 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$739.95

3"Extended


44505 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$749.95

Note: Custom brake lines are required. Installation on 1984 thru 1986 Softail® models requires relocation of the oil filter.

For FX Softail® Models from 2000 to PresentEach kit includes new shifter and brake rods.Standard Length


44575 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$891.99

3"Extended


44578 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$924.69

Note: Custom brake lines are required.Note: Kickstand installation on 2000 and later Softail® models requires the additional purchase of a CC #12214(OEM 50041-80A) chrome billet kickstand mounting bracket.

For Dyna Glide ModelsUtilizing a special backing plate, the controls move your foot position a full 12" forwardfrom the stock position on Super Glide® models. Fit all models from 1991 to present.Standard Length


44508 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$753.95

3"Extended


44511 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$769.95

For FL Softail® Models and Custom Application Big Twins from 1986 thru 1999Includes 5/8"-bore chrome master cylinder. Will mount on 4-speed and rigid frames, but may require shift rod modifications.Note: The 3" extended kit is not recommended for FL Softail® models due to a lack of fender clearance.

Standard Length


44523 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$849.84

3"Extended


44526 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$877.64

For Rubber-Mount Touring ModelsIdeal for those who want to stretch out on their Dresser, and if you want that customlook without floorboards. Fit Touring models from 1997 to present. Use the OriginalEquipment master cylinder and install with regular hand tools.44571 Ball milled style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$840.89

44572 Slotted style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$840.89

44498

Forward Control KitsFootpegs &

Foot C

ontrols

3.04

3


Supreme Legends USA ‘Classic’Forward Control KitsThe most economical high-quality billet forward controls Supreme Legends USA has to offer. Choose from highly-polished or chrome finishes.• Newly-improved quality upgrades for the

strongest, smoothest fit possible• Manufactured in the USA from 6061-T6

billet aluminum and precision CNC-mach-ined to the highest standards possible

• Rubber is UV resistant, and long-lasting• Include chrome mounting hardware (do

not include brake line or shift linkage)• Master cylinder utilizes a 3/4"-bore, and

is compatible with all current brake systems

For Twin Cam 88® Softail® ModelsFits all FX Softail® models from 2000 to present. Can also be installed on FL Softail® models if floorboard are removed.644022 Polished with rubber band footpegs . . . . . . . . . . . . . . . . . . . . . . . .$470.00

644023 Chrome with rubber band footpegs . . . . . . . . . . . . . . . . . . . . . . . .$570.00

644024 Polished with ribbed footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$470.00

644025 Chrome with ribbed footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$570.00

Note: Custom brake lines are required.Note: Kickstand installation on 2000 and later Softail® models requires the additional purchaseof a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket.

For 4-Speed FL/FX Models and 5-Speed Softail® ModelsFit 4-speed models from 1958 thru 1986 (except 4-speed Softail® models),and all 5-speed Softail® models from 1986 thru 1999.47870 Polished with rubber band footpegs . . . . . . . . . . . . . . . . . . . . . . . .$470.00


47872 Polished with ribbed footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$470.00

47873 Chrome with ribbed footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$570.00

Note: Custom brake lines are required.Note: Installation on 1986 Softail® models requires relocation of the oil filter.

For all Dyna Glide Models from 1991 to Present47874 Polished with rubber band footpegs . . . . . . . . . . . . . . . . . . . . . . . .$470.00


For all FXR Models from 1982 thru 200047878 Polished with rubber band footpegs . . . . . . . . . . . . . . . . . . . . . . . .$470.00


Replacement Parts693584 Master cylinder rebuild kit for CC #’s 47870 thru 47879 . . . . . . .$22.00

Available withRibbed Pegs

for yourPleasure

47870 Supreme Legends USA ‘Premium’ Forward Control KitsAward-wining and beautifully-crafted billet forward controls fromSupreme Legends USA. Available only with a chrome finish.• Newly-improved quality upgrades for the strongest, smoothest fit

possible• Manufactured in the USA from 6061-T6 billet aluminum and precision

CNC-machined to the highest standards possible• Designed with smooth end caps to hide assembly hardware• Side port master cylinder included for running a hidden brake line• Folding or solid footpegs available• Includes chrome mounting hardware (does not include brake line

or shift linkage)• Matching handlebar grips and footpegs available separately

Controls with Master CylinderIntegrated master cylinder uses banjo bolt fitting on the backside where it’s nearly invisible. Innovative design and flawless chrome make these setsa custom show stopper. Include hardware and shifter rod. Master cylinderutilizes a 9/16"-bore and is compatible with all current brake systems.644026 Solid footpegs. Fits all Softail® models from 2000 to present

(uses stock shift rod) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$760.00

47106 Solid footpegs. Fits all 5-speed Softail® models from 1986 thru 1999 (uses stock shift rod) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$760.00

644027 Fold-up footpegs. Fits all Softail® models from 2000 to present (uses stock shift rod) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$785.00

060330 Fold-up footpegs. Fits all 5-speed Softail® models from 1986 thru 1999 (uses stock shift rod) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$724.95

060331 Fold-up footpegs. Fits FXR models from 1982 thru 2000 . . . . .$789.99

060332 Fold-up footpegs. Fits Dyna Glide models from 1991 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$724.95

47852 Master cylinder rebuild kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95

Note: Custom brake lines are required.Note: Kickstand installation on 2000 and later Softail® models requires the additional purchaseof a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket.Note: Installation on 1986 Softail® models requires relocation of the oil filter.

Controls Using Stock Master CylinderThese controls were designed to replace stock mid-mount or forward con-trols and work with the stock rear master cylinder. Included are brackets,brake rod, and chrome mounting hardware.47100 Solid footpegs. Fits 5-speed FX Softail® models from 1986

thru 1999 (uses stock brake and shift rods) . . . . . . . . . . . . . . . . . .$599.00

060321 Fold-up footpegs. Fits FXR models from 1982 thru 2000 . . . . .$789.99

47102 Solid footpegs. Fits Dyna Glide models from 1991 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$599.00

Note: Installation on 1986 Softail® models requires relocation of the oil filter.

Optional Matching Grips and Footpegs644021 Handlebar grips (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.00

47104 Angle mount passenger pegs (sold in pairs) . . . . . . . . . . . . . . . . . .$77.00

47105 Straight mount passenger pegs (sold in pairs) . . . . . . . . . . . . . . . .$77.00


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.05

Supreme Legends USA ‘Pro-Smooth’ Forward Control KitsProvide a superior blend of form and function at affordable prices. These stylish billet forward controls are available with a show-qualitychrome finish.• Newly-improved quality upgrades for the strongest and smoothest fit

possible• Manufactured in the USA from 6061-T6 billet aluminum and precision

CNC-machined to the highest standards possible• Designed with smooth end caps to hide assembly hardware• Side port master cylinder included for running a hidden brake line• Rubbers are UV resistant, and long-lasting• Includes chrome mounting hardware (does not include brake line

or shift linkage)• Master cylinder utilizes a 3/4"-bore and is compatible with all current

brake systems• Matching handlebar grips and footpegs available separately• 2" extended forward controls are also available

Standard Forward Controls643000 Fits FX Softail® models from 1984 thru 1999 . . . . . . . . . . . . . . .$650.00

643001 Fits FX Softail® models from 2000 to present . . . . . . . . . . . . . .$650.00

643002 Fits Dyna Glide models from 1991 to present . . . . . . . . . . . . . .$650.00

643003 Fits FXR models from 1982 thru 1994 . . . . . . . . . . . . . . . . . . . .$650.00

2" Extended Forward Controls643004 Fits FX Softail® models from 1984 thru 1999 . . . . . . . . . . . . . . .$675.00

643005 Fits FX Softail® models from 2000 to present . . . . . . . . . . . . . .$675.00

Note: Kickstand installation on 2000 and later Softail® models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket.

Optional Matching Grips and Footpegs643009 Handlebar grip set . . . . . . . . . . . . . . . .$79.00

643007 Rear footpeg set . . . . . . . . . . . . . . . . . .$89.00

Replacement Parts643006 Footpeg set (includes clevis) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$121.00

643008 Toe peg set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.00

643007

Choppers Inc. Devil’s Tail Foot ControlsThe same foot controls used on Billy Lane’s Devil in a Red Dress bike andthe Miss Behavin bike, which was built for the Discovery® Channel’s bikerbuild-off between Billy Lane and Roger Bourget. . . . . . . . . . . . . . . . . . .$829.99• Can be used as jockey shift• Fits all Softail® models 1984 thru 1999• Bolts to stock mounts and uses stock master cylinder• Comes with everything pictured611230 Complete kit

Pro-One™ Chrome Billet Forward ControlsExclusive styling features and innovative engineering are beautifully com-bined in this Pro-One™ design. Mounting plates and levers are machinedfrom 6061-T6 aircraft quality aluminum with stainless steel footrest mountsand lever shafts. Smooth control operation is assured by roller and thrustbearings on all pivot points to eliminate any slop or play. Includes mount-ing hardware, master cylinder, and stainless steel shift rod. . . . . . . . . .$839.9565293 Fits 4-speed FL and FX models from 1958 thru 1986 (except 4-speed

Softail® models), and 5-speed Softail® models from 1986 thru 1999Note: Custom brake lines are required. Installation on 1986 Softail® models requires relocationof the oil filter.

Chrome Forward Control Kits for Big Twin ModelsThese affordable kits include O-ring footpegs and toe pegs,and chrome master cylinders. The brake pedals and shift leversride on bronze bushings giving smoother pedal action. The footpeg supports have female clevis’ that will accept most aftermarket footpegs. Kits include installation instructions, auniversal nylon brake line kit, mounting hardware and a selec-tion of shifter rods. Fit all 4-speed FL, FX models from 1958 thru1986 (except 4-speed Softail® models), and 5-speed Softail® mod-els from 1986 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$370.2917565 Kit with 3/4"-bore master cylinder for use

with stock calipers17586 Kit with 5/8"-bore master cylinder for use

with aftermarket calipersNote: Some late model FXs were manufactured without a mounting tab on theright end of the lower engine mount crossmember. These motorcycles require theadditional purchase of a CC #17503 Weld-on Frame Tab which is sold separately.


Footpegs &

Foot C

ontrols

3.06


3


Radial

Straight

Full

Spiral

Excel Standard Quick Shift Forward ControlsExcel standard forward controls are built with comfort and dura-bility in mind. The smooth performance of these controls makethem a favorite among riders who need functionality with a showquality appearance. Features CNC machined billet aluminum con-struction, adjustable levers and hidden brake line mount. Shifterfeatures an adjustable quick shift lever to make shifting easy andprecise. Stainless steel, polished hardware connects it all to yourframe. Available in chrome finish. They fit all Softail® models from1984 thru 1999. Footpegs and shifter toe peg are sold separately as a set. Select from the styles below. . . . . . . . . . . . . . . . . . . . . . . .$649.99606102 3/8" master cylinder bore606103 5/8" master cylinder bore

Radial

Straight

Full

Spiral

Excel ‘EL Series‘ Forward ControlsFeatures CNC machined billet aluminum construction, bronze bush-ing bearings and excellent quality. Brake line connection is hiddenbehind the master cylinder giving the controls a clean, sleek look.Includes a set of Full Rubber footpegs. All mounting stainless steelhardware included. Fits all Softail® models from 1984 thru 1999.Available in a polished aluminum finish. . . . . . . . . . . . . . . . . . . . .$459.99606100 3/8" master cylinder bore606101 5/8" master cylinder bore

Excel Footpeg SetsInnovative chrome billet designs include the forwardcontrol footpegs and a shifter toe peg.35820 Spiral Rib footpeg set . . . . . . . . . . . . . . . .$139.00

35823 Full Rubber footpeg set . . . . . . . . . . . . . .$139.00

644050 Straight Rib footpeg set . . . . . . . . . . . . . .$139.00

644051 Radial Rubber footpeg set . . . . . . . . . . . .$139.00

Excel ‘HE Series’ Forward ControlsThe HE series “High End” forward controls combine great quality in a sleek package.Features a unique integrated master cylinder reservoir, needle roller bearing move-ment and a hidden brake line mount, making these controls the envy of your friends.Adjustable levers and stainless steel hardware complete the package. When you wantyour bike to have a clean look, there is nothing better than HE forward controls. Theyall Softail® models from 1984 thru 1999. Available in chrome finish. Footpeg andshifter toe peg are sold separately as a set. Select from the styles below. . . . . . . .$799.99606104 3/8" master cylinder bore606105 5/8" master cylinder bore

Excel Optional Passenger Pegs35825 Spiral Rib male mount pegs . . . . . . . . . .$124.00

35826 Straight Rib male mount pegs . . . . . . . .$124.00

35828 Full Rubber male mount pegs . . . . . . . .$124.00

644052 Radial Rubber male mount pegs . . . . . .$124.00

Thunder Cycle Design Forward Control KitSame forward controls featured on Eddie Trotta's ‘Camel®’ series and onthe Discovery® Channel Bike Build-Off. Machined from billet aluminumwith a show-chrome finish and a 3/4"-diameter master cylinder bore.644000 Fits all Softail® models from 1986 thru 1999 (brake and shifter toe

pegs and forward control footpegs sold separately) . . . . . . . .$599.00

Note: Custom brake lines are required. Installation on 1986 Softail® models requires relocationof the oil filter.

644032 Fits all Softail® models from 2000 to present . . . . . . . . . . . . . . .$$611.50

Note: Kickstand installation on 2000 and later Softail® models requires the additional purchaseof a CCI# 12214 (OEM 50041-80A) chrome kickstand mounting bracket.

‘Death’ Series Forward Control Folding Footpegs with Ball DetentChoose from a variety of stylish patterns. Footpegs measure 81/2"-long and are sold in pairs.644011 Twisted . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644012 Crossed . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644013 Speared . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644014 Ball milled pattern . . . . . . . . . . . . . .$159.00

644015 Smooth . . . . . . . . . . . . . . . . . . . . . . . .$159.00

‘Death’ Series Toe PegsAvailable in smooth pattern only, and sold each.644016 Smooth (3"-long) . . . . . . . . . . . . . . . .$39.95

644017 Smooth (4"-long) . . . . . . . . . . . . . . .$49.95

Optional ‘Death’ Series Folding Rear Footpegs with Ball DetentChoose from a variety of stylish patterns. Foot-pegs measure 61/2"-long and are sold in pairs.644001 Twisted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644002 Crossed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644003 Speared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644004 Ball milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644005 Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

Optional ‘Death’ Series Handlebar GripsFit all models from 1973 to present (except those with handlebar air reservoirs) sold in pairs.644006 Twisted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95

644007 Crossed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95

644008 Speared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95

644009 Ball milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95

644010 Smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.95

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.07



Forward Controls for Softail® Models by Billet ConceptsSimple and efficient single shaft design. Integrated ball detent folding pegs sharea single shaft with shift and brake levers for rattle-free performance. Chrome-plated billet aluminum construction accented with stepped machined details andrubber band style pegs.47368 Fits 4-speed FL and FX models from 1958 thru 1986 (except Softail®

models) and 5-speed Softail® models from 1986 thru 1999 . . . . . . . . . .$614.99

47371 Fits all Twin Cam 88® Softail® models from 2000 to present . . . . . . . . .$849.99

Note: Custom brake lines are required.Note: Kickstand installation on 2000 and later Softail® models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket.Note: Installation on 1986 Softail® models requires relocation of the oil filter.

Chrome Billet Forward Control Kitsby Billet ConceptsBeautiful chrome-plated billet aluminum forward control kits. Availablewith pegs in the stock location or 3" extended for more leg room. Kits donot include brake lines or shift rods.

For 4-Speed FL/FX Models and 5-Speed Softail® ModelsFit 4-speed models from 1958 thru 1986 (except 4-speed Softail® models),and all 5-speed Softail® models from 1986 thru 1999.47300 Kit with rubber belted footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . .$800.79

47302 3" extended kit with rubber belted footpegs . . . . . . . . . . . . . . . .$949.99

47301 Kit with ball milled footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$800.79


For all FXR Models from 1982 thru 200047304 Kit with rubber belted footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . .$799.99

For all Dyna Glide Models from 1991 to Present47306 Kit with rubber belted footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . .$799.99

Replacement Parts26101 Master cylinder rebuild kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.49

47375 Master cylinder (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$192.99

47376 Rubber belted footpeg (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99

47377 Rubber belted shifter peg (sold each) . . . . . . . . . . . . . . . . . . . . . . . .$36.49

47378 Beauty cone for brake pivot (sold each) . . . . . . . . . . . . . . . . . . . . . .$19.99

47380 Brake pedal pad (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.99

060343 Replacement rubber rings (sold as set) . . . . . . . . . . . . . . . . . . . . . . .$24.49

Ball Milled

Twisted

Crossed

Smooth

Speared

Footpegs &

Foot C

ontrols

3.08


3


30160

49219

Chrome Billet Forward Control KitsBillet aluminum forward control kits include all mount-ing hardware to fit all 4-speed FL, FX and FXWG modelsfrom 1958 thru 1986, and 5-speed Softail® models from1986 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.9946605 Kit with 5/8"-bore master cylinder for use

with stock and single-piston calipers46607 Kit with 3/4"-bore master cylinder for

multi-piston and multiple rear calipersNote: Custom brake lines are required. Installation on 1986 Softail® models requires relocation of the oil filter.

BDL Forward Controls by Dalton DesignsThese show-quality forward controls are CNC-machined from billet aluminum. Features hidden hardware securing the master cylinder cover,pivot points and footpegs. Adjustable brake and shifter lever height. Sidebrake hose port. Direct brake actuation eliminates the flex often found inheim joints. Fit Softail® models from 1986 thru 1999.06700 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$637.50

06701 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$576.79

Replacement Parts060393 Shifter/brake pegs (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99

060394 Footpegs (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99

06718 Master cylinder top gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99

605010 Master cylinder rebuild kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49


Thunder Heart Chrome BilletForward ControlsQuality, CNC-machined billet componentshave brilliant chrome-plating. Includesraised pegs that mount to control shaftfor cleaner looks and better feel, as wellas a shifter rod and master cylinder.Available in standard or 2" extended ver-sions for 5-speed Softail® models from1986 thru 1999.30160 Standard length . . . . . . . . . . .$833.74

30161 2" extended . . . . . . . . . . . . . . .$879.99

49219 Rear pegs (sold in pairs) . . . .$154.99

Note: Custom brake lines are required. Installation on1986 Softail® models requires relocation of the oilfilter.

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.09For the Dealer Nearest You, Call: 800-729-3332

JayBrake ‘Radial Slotted’ Forward Control Sets for Softail ModelsRedesigned JayBrake forward controls reflect the new sleeker look of theradially machined foot controls and the softer imaging of edges. Whileoffering the same strength and show quality workmanship that has goneinto every set of JayBrake forward controls. Includes right and left controlsin a brilliant chrome finish.

For Softail® Models from 2000 to Present07406 Wide Bands pegs 3/4"-bore master cylinder . . . . . . . . . . . . . . .$1,088.95

07407 Wide Bands pegs 5/8"-bore master cylinder . . . . . . . . . . . . . . .$1,088.95

07408 Full Rubber pegs 3/4"-bore master cylinder . . . . . . . . . . . . . . .$1,088.95

07409 Full Rubber pegs 5/8"-bore master cylinder . . . . . . . . . . . . . . .$1,088.95

07410 Dove Tail Strips pegs 3/4"-bore master cylinder . . . . . . . . . . . .$1,193.75

07411 Dove Tail Strips pegs 5/8"-bore master cylinder . . . . . . . . . . . .$1,193.75

For Softail® Models from Late 1987 thru 199907431 Wide Bands pegs 3/4"-bore master cylinder . . . . . . . . . . . . . . . .$892.75

07432 Wide Bands pegs 5/8"-bore master cylinder . . . . . . . . . . . . . . . .$892.75

07433 Full Rubber pegs 3/4"-bore master cylinder . . . . . . . . . . . . . . . . .$892.75

07434 Full Rubber pegs 5/8"-bore master cylinder . . . . . . . . . . . . . . . . .$892.75

07435 Dove Tail Strips pegs 3/4"-bore master cylinder . . . . . . . . . . . . .$978.75

07436 Dove Tail Strips pegs 5/8"-bore master cylinder . . . . . . . . . . . . .$978.75

JayBrake 2" Extension Kits for Softail® ModelsChrome-plated brackets and rods give you an extra 2" of legroom. They fit all Softail® models from 1987 thru 1999 equipped with JayBrakeforward controls.07437 Classic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$174.20

07438 Sculpted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$200.00

Ness-Tech® ‘Radius’ Forward Control Kits• Integral 3/4"-bore master cylinder for incredible stopping power• Master cylinder linkage is hidden and shift controls feature

teflon bushings for smooth operation• CNC-machined from 6061-T6 aluminum before being chrome-plated• Accepts any male mount footpegs or mini floorboards and shift pegs

(not included)• Includes custom kickstand mount and custom shifter rod . . . . . .$999.9504950 Stock length for Softail® models from 2000 to present04952 Stock length for Softail® models from 1984 thru 199904954 Stock length for Dyna Glide models from 1993 to present04951 3" extended for Softail® models from 2000 to present04953 3" extended for Softail® models from 1984 thru 1999Note: There is no provision for a brake light switch on these forward controls. We recommendthe use of a CC #14137 Banjo Bolt Brake Switch.

Forward Control & Extension Kits

ZCB Forward Control AdaptorsAllows you to use any 1999 and earlier forward controls on any of the Twin Cam 88® Softail® models. Sold in sets. . . . . . . . . . . . . . . . . . . . . . . . . . .$159.5986673 Fits all Softail® models from 2000 to present

Ness-Tech® Forward Control Extensions for 2000-Up Softail® ModelsRelocates the Original Equipment foot controls 3"-forward to increaselegroom. Includes a pair of black anodized billet aluminum adaptor plates,extended stainless steel rear brake line, extended shifter rod, kickstandspring, pin, and mounting hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.9505806 Fits all Twin Cam 88® FX Softail® models from 2000 to present

07411

Footpegs &

Foot C

ontrols

3.10


3


RST ‘New Design’ Forward ControlsUniquely-shaped, billet aluminum forward controls with TÜV approval for 4-speed Big Twins, Softail®, Dyna Glide, Sportster® and Twin Cam 88® models. Available with ‘Rubberband’ and ‘Knurled’ peg designs. The versions for 4-speed Big Twins and Softail® models up to 1999, and thecontrols for Twin Cam 88® models are extended 3 cm.

Fit all 4-Speed FL and FX Models from 1958 thru 1986, and 5-Speed FX Softail® Models from 1986 thru 1999 (3cm extended)86890 Style B (‘Rubberband’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,017.00

86891 Style A (‘Knurled’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,102.00

Fit Twin Cam 88® Softail® Models from 2000 to Present (3cm extended)86894 Style B (‘Rubberband’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,200.00

86895 Style A (‘Knurled’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,200.00

Fit Sportster® Models from 1991 thru 200386892 Style B (‘Rubberband’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,200.00

86893 Style A (‘Knurled’) with TÜV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,200.00

Fits Dyna Glide Models from 1991 to Present86896 Style B (‘Rubberband’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,017.00

Fits FXR Models from 1982 thru 200086897 Style B (‘Rubberband’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,017.00

Style B

Style BStyle A

Style A

Available For

Twin Cam 88®

Models

RST ‘New Design’ Black Powder Coated ExtendedAluminum Forward ControlsUniquely-shaped forward controls with TÜV approval for 4-speed Big Twinsand Softail® models. The versions for Big Twins thru 1999, and 2000-up TwinCam 88® models are 3 cm extended.686493 Fits 4-speed FL and FX models from 1958 thru 1986 (except Softail®

models) and 5-speed Softail® models from 1986 thru 1999 . .$1,165.00

686492 Fits all Twin Cam 88® Softail® models from 2000 to present . .$1,378.00

Extended Forward Control Kits for Softail® ModelsDesigned just for you big bikers 6 ft. or taller, these chrome-plated kitsextend the footpegs four inches further forward. Unlike the stock forwardcontrols, our kits also bring the footpegs level with each other providingthe rider with a more secure feeling and better control. So that you don’thave to lift your feet for braking and shifting, our kits retain the stock peg-to-pedal distances by utilizing many of the major components from yourbike along with longer shifter and brake rods. The backing plates are madefrom 5/16" billet steel for superior strength. Installs in less than one hour.Includes all necessary parts and detailed instructions.17558 Fits early 1987 FX Softail® models with top-finned caliper

(also fits 1986 models if the oil filter is relocated) . . . . . . . . . . . .$213.69

17559 Fits FX Softail® models from late 1987 thru 1999 (with smooth caliper) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$226.69

Note: 1990-up models will require the additional purchase of an OEM 33660-85 or equivalentshifter arm. Another simpler option is to enlarge the shifter shaft bushing in our backing plateto 9/16"-diameter (.5625") using a drill bit or reamer.


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.11


Weld-On Frame TabWeld-on right hand side frame mounting tabfor all late model 4-speed Big Twins without theOriginal Equipment mounting tab.17503 Sold each . . . . . . . . . . . . . . . . . . . . . . . . .$6.54

Forward Shifter KitThis original style replacement forward controlset features a heavy duty mounting bracket andcomes complete with ratchet top dust cover andarm. Fits FL models from 1952-early 1979 and FXmodels from 1971 thru 1973. Also can be used as a forward shift conversion kit on FX modelsfrom 1974-early 1979, however it will reversethe shift pattern. . . . . . . . . . . . . . . . . . . . . . . . .$89.99060028 Works with floorboards or footpegs

Chrome Forward ControlsThis chrome forward control kit converts mid-shift FX or FL models with floorboards tothe clean smooth lines of late Softail® models.Constructed of heavy-gauge steel, both thebrake and shift sides are chrome-plated andcome complete with footpegs and mountinghardware. They are also available separately.Master cylinder sold separately. . . . . . . . . .$235.99130348 Includes shift (CC #060050) and brake

(CC #130423) assemblies

Forward Control Shifter KitFeatures a heavy-duty mounting bracket and rubber pegs with chrome end caps. Kitcomes complete with linkage for ratchet top(1952-early 1979) and rotary top (late 1979-1986)shifters. Fits 4-speed Big Twin models from 1952 thru 1986 and 5-speed Softail® modelsfrom 1986 thru 1999.060050 Forward shift kit . . . . . . . . . . . . . . . .$130.19

060043 Replacement backing plate . . . . . .$54.49

Note: FX models must re-use existing original Equipmentshift rod end.

Forward Control Brake KitFeatures a heavy duty mounting bracket andrubber pegs with chrome end caps. Available for4-speed Big Twin models from 1970 thru 1986with Wagner or Kelsey-Hayes style 1-piece mas-ter cylinder. Kit comes complete with mountingbracket, brake pedal, master cylinder plunger,footpeg and hardware.130423 Forward brake kit . . . . . . . . . . . . . .$147.99

139003 Replacement backing plate for Wagneror Kelsey-Hayes master cylinders .$67.49

139005 Replacement pedal return spring . .$4.99

Note: Master cylinder sold separately

130423

060050

Forward Brake Kit with Master CylinderThis brake control kit includes a chromeWagner-style master cylinder, brake pedal, backing plate, return spring, plunger, pedal stop and hardware. . . . . . . . . . . . . . . . . . . . . .$142.99060031 Fits Big Twin models 1973-early 1979

(disc brake)

OEM-Style Forward Control KitsChrome-plated kits for OEM style floorboards or 3/8" stud mount custom footpegs. The shifter kit hasa splined shift lever and arm, shift peg, braced shifter backing plate, FL and FX shifter rods, andmounting hardware. The brake kits are available with or without master cylinder, and include a back-ing plate, brake pedal, brake pedal stop, return spring, plunger, and mounting hardware.

Forward Shifter Kit17553 For 4-speed Big Twins 1952 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99

Forward Brake Kits with Master Cylinder17554 For 4-speed Big Twins 1970-early 1979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$144.99

17556 for 4-speed Big Twins 1958 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.99

Forward Brake Kits without Master Cylinder17555 For 4-speed Big Twins 1970-early 1979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$86.99

17557 For 4-speed Big Twins 1958 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$93.99

17553 17554

Footpegs &

Foot C

ontrols

3.12

3


Forward Controls for Dyna Glide ModelsAvailable in stock or 2"-extended length. Extension kit moves OriginalEquipment forward controls on Dyna Wide Glide® models 2" farther forward. Complete kits include ribbed foot and shifter pegs, mountingplates, control arms and all hardware. The extension kit includes chromemounting plates with shifter and brake rods, re-using other forward control components. Fit all Dyna Glide models from 1991 to present.17635 Stock length kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$420.17

17636 2" extended kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99

17637 Extension kit for FXDWG forward controls . . . . . . . . . . . . . . . . .$95.99

Forward Control Set for FXR ModelsAn easy-to-install, American-engineered forward control assembly for all of the 5-speed FXR models from 1982 thru 1994 whether Shovelhead orEvolution®-powered. Simple installation does not require the primary coverto be removed. All parts are show-chromed. A chrome cap for the thru-the-case shifter, and a complete hardware set are included.17550 Complete kit, includes brake and shifter control . . . . . . . . . . . .$352.99

17514 Replacement shifter shaft cover and screw for CC #17550 . . . .$10.99

17548 Replacement brake pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

17504 Replacement shift lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.29

130417

Chrome Forward Controls for Softail® ModelsThese stock-style forward controls replace the Original Equipment blackpainted units with brilliant chrome-plated parts. Brake and shift kits aresold separately and come complete with footpeg and mounting hardware.

Brake Control KitsOriginal brake master cylinder and linkage is retained. Kit for 1982-early1987 models also works well as a mid shift conversion on 4-speed FL modelswith remote reservoir master cylinders. 130415 Fits FX Softail® and 4-speed FXWG models 1982-early 1987 . .$119.99

130417 Fits FX Softail® models from late 1987 thru 1988 . . . . . . . . . . . . .$129.99

130418 Fits FX Softail® models from 1989 thru 1999 . . . . . . . . . . . . . . . . .$111.99

Shift Control KitFeatures our heavy-duty investment cast bracket and comes complete withshift rod with rod ends. 060158 Fits 5-speed FX Softail® models from 1986 thru 1999 . . . . . . . . .$115.64

060158


Santee® Forward Control Kit for FX ModelsA complete kit for moving the FX mid-mount controls to a more comfort-able position near the front frame downtubes. Fits all FX models from 1973 thru 1985 with mid-mount controls regardless of which of the threeOriginal Equipment master cylinders are fitted. All major components are flawlessly chrome-plated including the ribbed pegs. Oversized rubber-covered brake and shifter toe pegs and hardware are included.08948 Fits all FX models from 1973 thru 1985

(except Softail® and 4-speed FXWG models) . . . . . . . . . . . . . . . .$429.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference


Floorboard Forward Control Kits

Chrome Billet Aluminum Floorboard ControlsUnique forward controls with integral floorboard mounts by BilletConcepts that set the standard for function with style. They feature on-board master cylinders with hidden brake line ports, and stepped billetstyling on all arms, levers and control surfaces.47370 Fits Softail® models from 1987 thru 1999 . . . . . . . . . . . . . . . . . . .$906.99

47898 Fits all FXR models from 1982 thru 2000 . . . . . . . . . . . . . . . . . . . .$999.99

Note: Installation on FXR and Softail® models may require custom brake lines, and installationon 1986 and earlier FX Softail® models requires oil filter relocation.

Floorboard Forward Controls for Softail® ModelsChrome shifter and brake side controls with floorboards. Includes chrome-plated mounting brackets, floorboards, brake pedal and heel/toe shiftlevers, and chrome master cylinder with cover. Use as a chrome replacementfor FL Softail® models, or swap from pegs to floorboards on FX Softail®

models, or add forward control floorboards to scratch-built machines. Fitsall Softail® models from 1987 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$444.9922080 Complete chrome floorboard kitNote: 1986 and earlier models require brake line modifications and relocation of the oil filter.

Floorboard Forward Control Kit for Softail® Models by Khrome Werks®

Provides full support while riding by moving the controls almost 3 inchesfurther forward. Utilizes the stock shift lever, with hinged chrome-platedsteel floorboards. This kit includes a new rear brake pedal and is recom-mended for riders under 6 feet tall because the brake pedal provides a moreupright position. Fits all FX Softail® models from 1986 thru 1999. . . . .$580.6431610 Complete kitNote: Installation on 1986 models requires relocation of the oil filter.

Forward Controls & Specialty ControlsFootpegs &

Foot C

ontrols

3.14

3


Chrome Forward Control Kitsfor Late Sportster® ModelsFeatures integrated shift lever and brake lever on the footpeg shaft.Similar to the stock style forward controls found on Sportster® models from 1998 to present that are equipped with OEM style forward controls.Fits 5-speed Sportster® models from 1991 thru 2003. All chrome hardwareand instructions included (footpegs not included) . . . . . . . . . . . . . . . . .$458.3917546 Replaces OEMs 33891-98, 33892-98

LSL Rear Set Controlsfor Sportster® ModelsThis kit is a must for any high performance Sportster® model.CNC-machined ergonomic rear sets provide the proper riding position. They work well with stockhandlebars and feature foldingfootpegs and a special bracket forthe shift side because there are noexisting mounting holes on thestock frame. Silver anodized forstrength and wear protection.86013 Fits all Sportster®

models from 1986 thru 2003 . . . . . . . . . .$985.00

Shift Side

Brake Side

Forward Control Kits for Evolution® Sportster® ModelsAvailable in two different versions to fit all models from 1986 to present.Each kit includes all the necessary brackets, pedals, linkage, O-ring pegs,hardware and detailed instruction sheet to convert both brake and shifterto forward-mount style.17551 Fits all Evolution® Sportster® models with 4-speed transmissions

from 1986 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$323.99

17545 Fits all Evolution® Sportster® models with 5-speed transmissions from 1991 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$353.99

Note: CC #17545 will not fit with Original Equipment highway bars.

17549 Replacement brake pedal for CC #17551 . . . . . . . . . . . . . . . . . . . . .$45.49

17530 Replacement shift lever for CC #17551 . . . . . . . . . . . . . . . . . . . . . . .$11.09

Mid Foot Control Kit for V-Rod® Models by Kosman Specialties• Designed to provide a different riding position• A preferred position for comfort an sport riding• A complete bolt-on kit supplied with all necessary hardware

and easy to follow instructions• Will only fit with aftermarket exhaust such as Vance & Hines®, or

Screamin’ Eagle® exhausts – will not fit with stock exhaust system• The parts are machined out of aircraft grade aluminum alloy

with a silver powder-coat finish644039 Fits all V-Rod® models from 2002 to present . . . . . . . . . . . . . . . .$445.00


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.15

Budget Forward Control SetsForward controls sold in complete sets or individually by side.

Complete Sets78331 For FL models from 1958 thru 1985 and 1971 thru 1973 FX

models (hydraulic rear brake only – requires longer hose) . . .$147.99

78332 For FX models from 1974-early 1983 . . . . . . . . . . . . . . . . . . . . . . . .$147.99

Brake Side Only78333 For FL/FX models from 1936 thru 1978 (hydraulic

rear brake only – requires longer brake hose) . . . . . . . . . . . . . . . .$83.99

78334 For Sportster® models from 1957 thru 1974 (left-side cable-operated brake) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.59

78336 For Sportster® models from 1979 thru 1985 (requires longer brake hose) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.59

Shift Side Only78337 Fits 1971 thru 1973, FXWG models 1980-early 1985* . . . . . . . . .$83.99

78338 For Sportster® models from 1954 thru 1974 (right-side shift) . .$94.16

78340 For Sportster® models from 1977 thru 1985 (left-side shift) . . .$91.99

* Requires relocation of horn on some models.

Santee® Forward Controls for Sportster® ModelsTwo complete and easy-to-install kits for moving the stock controls to amore comfortable position near the front frame downtubes. All major com-ponents are flawlessly chrome-plated including the ribbed pegs. Oversizedrubber-covered brake and shifter toe pegs and mounting hardware areincluded. 08946 Fits Sportster® models from 1957 thru 1974 . . . . . . . . . . . . . . . . . .$489.99

08947 Fits Sportster® models from 1977 thru 1978 . . . . . . . . . . . . . . . . . .$459.99

Extended Forward Controls for Early Sportster® ModelsStretch out with these extended chromed controls for Sportster® models.Unlike other kits, the original master cylinder is retained in the factory position, eliminating the need to re-bleed or re-plumb messy brake lines.Heavy-duty mounting plates are over 5/16" thick with a 1” diameter footpeg support. Heim joints at control linkage ends provide smooth operation with minimal maintenance. Complete with chrome ribbed pegsand rubber shift and brake pads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$294.99060148 Fits Sportster® models from 1980 thru 1981

130426 130425

Forward Control Sets for Sportster® ModelsAvailable for mechanical or disc brake models these forward control unitsprovide a more comfortable riding position. Includes rubber footpegs withchrome end caps.

Complete KitsSets include both shift and brake controls.060170 Fits Sportster® models from 1975 thru 1976 . . . . . . . . . . . . . . . . . .$177.99

060172 Fits Sportster® models from 1977 thru 1978* . . . . . . . . . . . . . . . . .$177.99

060173 Fits Sportster® models from 1979 thru 1981* . . . . . . . . . . . . . . . . .$177.99

Brake Controls ONLYAvailable for mechanical or hydraulic disc brakes. Kits for hydraulic disc aredesigned to work with Wagner or Kelsey-Hayes style 1-piece master cylinders.130425 Fits Sportster® models from 1975 thru 1978. Mechanical cable

operated linkage. Right side brake . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.99

130426 Fits Sportster® models from 1979 thru 1981. Hydraulic disc brake. Right side brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.99

Note: Kit requires extended brake line (not included)

139007 Brake cable replacement for CC #130425 . . . . . . . . . . . . . . . . . . . . .$28.99

Shift Controls ONLY060025 Fits Sportster® models from 1975 thru 1976. Left side shift . . . . .$73.99

*Note: Kit requires modification to stock shift arm. Most installations will require longer motormount bolts. Use CC #36134 (sold separately)

060025

Economy Forward Control Kits

Adjustable Mini Floorboard KitsFootpegs &

Foot C

ontrols

3.16

3


Universal Adjustable Mini-Floorboard Kits for Highway BarsDesigned to clamp-on to highway bars and features vibration-absorbingdampers in the floorboards. In addition to having 7/8" of fore-to-aft move-ment, they may also be rotated in a 360° arc. Includes everything necessaryfor installation and features flawless chrome-plating on the individual components. Floorboards measure approximately 71/4" x 31/2".09899 Fits 1"-diameter highway bars . . . . . . . . . . . . . . . . . . . . . . . . . . . .$141.99

09900 Fits 11/4"-diameter highway bars (shown) . . . . . . . . . . . . . . . . .$167.22

Note: These floorboard kits should not be used under normal stop-and-go operating conditions

Adjustable Passenger’s Mini-Floorboard Kitsfor Softail® ModelsDesigned to bolt to the passenger footpeg mounting points andavailable in two different versions. One has mini “Shaker” floor-boards with vibration-absorbing dampers. Both kits have 7/8" offore-to-aft movement and may be rotated in a 360° arc. Kitsinclude everything necessary to make the conversion, and fit allFX Softail® models and FLST models from 1984 thru 1999, andFLSTC models from late 1987 thru 1989 (1990-1999 FLSTC modelsmust use CC #09904). Floorboards measure approx. 71/4" x 31/2".09888 Kit with “Shaker” mini-floorboards . . . . . . . . . . . . .$221.99

09911 Kit with mini-floorboards . . . . . . . . . . . . . . . . . . . . . . .$214.99

09904 Kit with “Shaker” mini-floorboards for FLSTC models from 1990 thru 1999 . . . . . . . . . .$221.99

09888

09911

09911

09888


Adjustable Mini Floorboard KitsApparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.17

Adjustable Passenger’s Mini-Floorboard Kitfor ‘Dresser’ ModelsBolts to the passenger floorboard mounting point on all latemodel ‘Dressers’. Mini-floorboards have vibration-absorbingdampers with 7/8" of fore-to-aft movement, and can be rotatedin a 360° arc. Kit includes everything necessary to make the con-version and features flawless chrome-plating on the individualcomponents. Floorboards measure approx. 71/4" x 31/2". . .$221.9909880 Fits all FLT, FLHT and FLHS models from 1987 thru 1992

Adjustable Passenger’s Mini-Floorboard Kitfor FXR ModelsBolts to the passenger footpeg mounting point on FXR models.“Shaker” floorboards have vibration-absorbing dampers, 7/8" offore-to-aft movement, and rotate in a 360° arc. Kit includes every-thing necessary for installation and features chrome-plated com-ponents. Floorboards measure approx. 71/4" x 31/2". . . . . . . .$221.9909904 Fits all FXR models from 1982 thru 2000

Adjustable Driver’s Mini-Floorboard KitFit into the stock female footpeg clevis’ on models with forward controls.In addition to 7/8" of fore-to-aft movement, they may be rotated in a 360°arc. Kit includes everything necessary for installation and features flawlesschrome-plating on the individual components. . . . . . . . . . . . . . . . . . . . . .$186.8909910 Fits Dyna Wide Glide®, FXST, FXSTC, FXSTS, FXSTSB, and 4-speed

FXWG models from 1983 to present

FloorboardsFootpegs &

Foot C

ontrols

3.18

3


Tour Ease® Mini FloorboardsMay be installed in any clevis-style footpeg mounts, including as passengerfloorboards for Softail® models, or to replace the stock rider pegs on FXR or Softail® models. Additional holes permit them to be rotated 15° forincreased comfort.05103 Sold in pairs (measure 8"-long x 4"-wide) . . . . . . . . . . . . . . . . . . .$41.19Note: When used in place of highway pegs, these floorboards should not be used under normalstop and go conditions.

05100 Replacement bolt and spacer set (sold in pairs) . . . . . . . . . . . . . . . .$8.54

05101 Replacement mounting blocks (sold in pairs) . . . . . . . . . . . . . . . . .$17.24

Tour Ease® Passenger FloorboardsThese passenger boards provide excellent comfort, and have a unique universal mounting system that promotes easy installation. Made from 12-gauge steel with rubber pads, and triple chrome-plated.05104 Set of two floorboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.49

05105 Replacement floorboard pads (sold in pairs) . . . . . . . . . . . . . . . . . .$11.29

Rear Passenger FloorboardsChrome floorboards provide additional comfort. They bolt-on in minutes,but will not work on models with kickstart only due to interference withthe kickarm. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.4905106 Fit 4-speed Big Twins from 1958 thru 1986 (except Softail® models)

Adjustable Passenger Floorboard and FootpegMounting KitsChrome steel floorboard kit allows you to update your Touring or FXRmodel with passenger floorboards that can be adjusted over a range of11/2". Includes left and right-side swingarm pivot brackets and all necessaryhardware for installation. Installation may require the additional purchaseof passenger floorboards and mounting brackets. Chrome steel footpeg kitpermits you to bolt footpegs to the swingarm pivot bracket on Touring andFXR models where floorboard mounting brackets have traditionally beeninstalled. Permits the footpegs to be rotated in a 360º arc providing a widerange of adjustment. Includes chrome-plated pivot brackets, extensions,adjustable bracket and arm, clevis’ and all necessary hardware for installa-tion. Fit all Touring and FXR models from 1980 to present.46117 Adjustable passenger floorboard kit . . . . . . . . . . . . . . . . . . . . . . .$172.59

46121 Adjustable footpeg kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$261.99

Note: Passenger footpegs are not included in the kit.

46121

46117


Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.19

Floorboards

Ness-Tech® Full-Length Floorboard KitsEliminate the need for forward controls or high-way pegs. Made from 3/8"-thick billet aluminumplate, machined for cushioned rubber insertsand chrome-plated. They measure approximate-ly 19"-long x 4"-wide and include all necessarymounting brackets and hardware. Sold in sets.05642 Fits FL Softail® models

from 1986 to present . . . . . . . . . . .$449.95

05085 Replacement rubber inserts (set of 16) . . . . . . . . . . . . . . . .$24.95

05148

05147

05149

05102

Cyclesmiths™ Banana BoardsFloorboards are curved in front and back for agreat look, with a high-grip ‘riveted’ footpad.Available in 14" and 19" lengths, passengerfloorboards and brake pedal cover. Floorboardsfit the late spacing used on all 5-speed modelswith floorboards from 1980 to present.Passenger boards fit all models from 1994 topresent originally equipped with rear floor-boards, while the brake cover fits FL Softail®

models from 1986 to present and Touring models from 1983 to present. Sold in pairs.05147 Driver floorboards (14"-long) . . .$224.95

05148 Driver floorboards (19"-long) . . .$249.95

05149 Passenger floorboards . . . . . . . . . .$169.95

05102 Brake pedal cover (sold each) . . . .$79.95 Ness-Tech® Mini FloorboardsAn exciting alternative to full-sized floorboardsfor a leaner, custom look. Made from chrome-plated billet aluminum. Measures 8"-long x31/2"-wide x 3/8"-thick. Includes all necessarymounting hardware. Sold in sets.05643 Male mount (shown) . . . . . . . . . . .$199.95

05225 Replacement rubber inserts (set of 8) . . . . . . . . . . . . . . . . . . . . . . . .$14.89

Adjustable Floorboard KitsKits permit a full seven inches of fore-aft adjustmentalong with angle and height adjustability utilizingforged and chrome-plated mounting brackets.Available with modified versions of our popular oval floorboards or oval ‘shaker’ floorboards. Fit all4-speed FXWG models from 1980 thru 1986, and allSoftail® or Dyna Wide Glide® models from 1984 topresent (except FL Softail® models). May also beinstalled on any motorcycle with clevis-style footpegmounts. For example, they will fit on the rear ofSoftail® models as a set of passenger floorboards.Includes hardware and instructions.26568 Kit with oval ‘shaker’ floorboards . . . . . .$143.49

26569 Kit with oval floorboards (shown) . . . . .$132.99

Tour Ease® Custom FloorboardsCustom assemblies include custom pad withcover, vibration dampers and heavy-gaugechrome steel bases. Available in oval or rectan-gular styles.

Early FloorboardsFits 4-speed FL models from 1966 thru 1984.190590 Oval (sold in pairs) . . . . . . . . . . . . . . .$94.44

190591 Rectangular (sold in pairs) . . . . . .$104.99

Late FloorboardsFits 5-speed Touring models and FL Softail®

models from 1980 to present.14324 Rectangular (sold in pairs) . . . . . .$117.59

Custom Floorboard PadsFeature non-slip rubber pads, chrome slottedcovers and high density vibration dampers.Ready for mounting on stock floorboard bases.14319 Rectangular (sold in pairs) . . . . . . .$64.49

190590

14324190591

14319

Vintage-Style Floorboards for Touring and Softail® ModelsChrome plated vintage style floorboards featureraised footpad and anti-vibration dampeners fora comfortable ride. Fits 5-speed Touring modelsfrom 1980 to present, and Fat Boy® and HeritageSoftail® models from 1986 to present. Replace-ment rubber pads and vibration dampener kitsare also available separately.190504 Floorboard set

(repl. OEM 50599-89T) . . . . . . . . . . .$67.49

26488 Black replacement pads for oval floorboards (sold in pairs) . . . . . . . .$12.49

26566 Replacement bumpers (repl. OEM 50620-74) set of 8 . . . .$10.99

Floorboards & BracketsFootpegs &

Foot C

ontrols

3.20

3


Solid Floorboards for FL ModelsChrome plated floorboards with solid mountpads fit FL models 1970-1984. Can also be usedon early steel primaries when bracket kit 26561 is used. Sold in pairs.190509 Floorboard set . . . . . . . . . . . . . . . . .$52.99

26565 Rectangular pads (repl. OEM 50614-66T) . . . . . . . . . .$10.99

190504

26566

26488

26487

26564

26567

12997

Early Model Late Model

12999

Original Equipment-Style FloorboardsAvailable in three different versions that fit the stock mounting brackets on all 4-speed models from1940 thru 1984. The oval ‘shaker’ floorboards provide Original Equipment styling, with floating upperplates just like the late model floorboards. Replacement bracket kits are available separately.

Floorboard Sets26487 Standard oval floorboards (repl. OEM 50603-40) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.79

26564 Rectangular ‘shaker’ floorboards (repl. OEM 50603-74TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$67.99

26567 Oval ‘shaker’ floorboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$80.99Note: Installation of oval ‘shaker’ floorboards on foot clutch models reduces the amount of travel available for the foot clutchrocker pedal. Modifications may be required on these models.

Replacement Parts26565 Black rectangular pads (repl. OEM 50614-66T) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

26488 Black oval pads (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49

26566 Replacement bumpers (repl. OEM 50620-74) set of 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

26559 Rectangular floorboard upper plate with pad (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

Late Model FloorboardsThese alternatives to the stock floorboards fit all 5-speed Touring and FL Softail® models from 1980 topresent. The oval ‘shaker’ set has the mounting brackets offset from the center of the floorboards.Depending on which way they’re installed, you’ll end up with your feet approximately 1" further aheadof, or further behind, the stock position. This permits you to tailor your foot placement for increasedcomfort. The rectangular ‘shaker’ floorboards are replacement items for crash-damaged or used motor-cycles. Compatible with Original Equipment or CC replacement parts.

Floorboard Sets12997 Rectangular ‘shaker’ floorboards (repl. OEM 50621-79A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.79

12999 Standard oval floorboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.49

Floorboard SpacerModels equipped with floorboards require this aluminum spacer to provide the correct floorboard and shift lever clearance.95157 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.49

Replacement Parts26565 Rectangular pads (repl. OEM 50614-66T) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

26488 Replacement pads for oval floorboards (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49

26566 Replacement bumpers (repl. OEM 50620-74) set of 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

26559 Rectangular floorboard upper plate with pad (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

26560

26561

OEM-Style Bracket Kits for FloorboardsReplacement brackets and mounting tabs for installing floorboards.26560 Bracket kit for aluminum primary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99

26561 Bracket kit for ‘tin’ primary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99


Floorboard Brackets & CoversApparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.21

Chrome Swingarm Blocks for Touring Models by Accutonix®

CNC-machined from 6061-T6 billet aluminum.Replaces the stock swingarm mounting blocks. Also has mounts for Original Equipment rear floorboards. . . . . . . . . . . . . . . . . . . . . . . .$223.6438677 Fits all Touring models from 1993

to present

Front Floorboard Bracketsfor Touring ModelsGreat for replacing OriginalEquipment black brackets. Made frominvestment cast steel and beautifullychromed. Fit the driver’s floorboardson all 5-speed Touring models from1983 to present.90058 Rear, left-side

(repl. OEM 50622-83B) . .$56.14

90059 Rear, right-side (repl. OEM 50518-83B) . .$45.19

90057 Front, (sold in pairs) repl. OEM 47365-83B . . . .$72.29

90057

9005890059

Floorboard Adapter BracketSpecial bracket used when installing mufflerpipes on 1970 thru 1984 4-speed FL models, to keep floorboards clear of pipes. . . . . . . .$15.49280010 Sold each

90060

Chrome Passenger FloorboardSupport BracketsChrome-plated die-cast steel passenger floor-board supports. Sold in pairs.98380 Fits all 1987 Touring models (repl.

OEM 52713-87). Can also be used onthese models from 1988 thru 1992 tolower the floorboards 11/2" . . . . . .$123.29

98296 Fits Touring models from 1987 thru 1992 (repl. OEM 52713-91). Can also be used to raise the floorboards 11/2" on 1987 Touring models . . . . . . . . . .$123.29

98296

98380

discontinued

Floorboard Brackets for Softail® ModelsChrome replacement floorboard brackets to fitall FL Softail® models from 1987 thru 1999.90060 Right-side bracket (repl. OEM 42431-87A)

sold each . . . . . . . . . . . . . . . . . . . . . . .$169.99

90061 Left-side bracket (repl. OEM 50990-86B)sold each . . . . . . . . . . . . . . . . . . . . . . . .$16.99

90061

Doss Floorboard and Shifter Bracket Cover KitThis 4-piece kit of ribbed chrome steel coversadds a clean‘finished’ look to Softail® modelsequipped with floorboards. Includes covers forthe right-side floorboard bracket and support,and for the master cylinder, and a matchingcover for the shifter bracket. The kit’s compo-nents are also available separately below.46060 Fits FL Softail® models from 1989

thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$155.99

Floorboard Bracket Cover SetTwo-piece set enhances the look of the rightfloorboard/master cylinder mounting bracket.46064 Fits FL Softail® models from late 1987

thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . .$52.39

Shifter/Kickstand Bracket CoverCovers the Original Equipment bracket to mini-mize the unfinished look of the stock parts.46065 Fits FL Softail® models from 1989

thru 1999 (will not work with OriginalEquipment highway bars) . . . . . . . . .$79.99

46060

46064

46065

Footpegs &

Foot C

ontrols

3.22

Floorboard Covers

3


Doss Lighted Passenger Floorboard CoversFor added lighting and increased visibility. Fits Touring models from1987 to present. Sold in pairs.46373 Lighted floorboard marker lights only for Touring models

already equipped with CC #46372 or OEM 50782-91 . .$44.99

46372 Bottom cover only (sold in pairs) . . . . . . . . . . . . . . . . . . . . .$51.39

09134 Replacement bulbs (pack of 10) . . . . . . . . . . . . . . . . . . . . . .$12.89

46372

Chrome Undercovers for Passenger FloorboardsA great accessory to stylize passenger floor-boards. The concho and leather accent lookgreat when the floorboards are folded up. Easy-to-install, includes hardware. . . . . . . .$59.9909905 Fit all FLT, FLHT, FLHS and Road King®

models from 1987 to present

Chrome Undercovers for Passenger FloorboardsLook good even when passenger floorboardsare folded up. Simple installation limited todrilling mounting holes in the floorboard bases.Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.9905150 Fit all Touring models from 1987

to present

Pro-One™ Floorboard Covers and Brake Pedal CoverGreat-looking chrome-plated billet items com-plement the graceful lines of your bike. All haveball milled details on their upper surfaces.

Front FloorboardsInstall over the stock floorboards. . . . . . . .$230.9565178 Fits FL Softail® and 5-speed Touring


Brake Pedal CoverTwo-piece design has a lower plate that enclosesthe stock brake pedal lever and holds the ballmilled top pad. . . . . . . . . . . . . . . . . . . . . . . . . . .$67.9565123 Fits FL Softail® models from 1987 to

present, and 5-speed Touring models from 1983 to present

65178

Ness-Tech® ‘Floorboard Skins’Update your floorboards with these chrome-plated billet aluminum ‘floorboard skins’. Theyreplace the top plate and rubber pad of yourOriginal Equipment or rectangular floorboardsand bolt solidly to the bottom plate on all mod-els made since 1966. Easily adapted to the olderfloorboards on models dating back to 1940.05646 Floorboard skins (sold in sets) . . .$249.95

05227 Replacement rubber inserts (set of 8) . . . . . . . . . . . . . . . . . . . . . . . .$18.95

65123

Doss Floorboard UndercoversCovers are made from heavy-gauge stampedsteel with flawless chrome-plating. Instructionsand all necessary mounting hardware are included. Sold in pairs. . . . . . . . . . . . . . . . . . . .$49.9946610 Fit the Original Equipment driver’s floor-

boards on all 5-speed Touring and FLSoftail® models from 1980 to present

Doss Floorboard PadsDesigned to replace the top plate and rubberpad of your Original Equipment or CC rectangu-lar floorboards, and still utilize the stock rubberbumpers. Rubber inserts are sandwichedbetween stamped steel plates which featureflawless chrome-plating, and the ribs protrudethru slots cut into the top plate. Pads may beinstalled on the stock bottom plates of all mod-els made since 1966 or if the rubber bumpermounts are not desired, bolted to the bottomplates by drilling two small holes at the frontand rear of each one. Includes 8 new rubberbumpers.46600 Complete kit . . . . . . . . . . . . . . . . . . . .$76.29

46061 Replacement ribbed insert (pair) .$13.99

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference


‘Death’ Series Passenger Footpegs by Thunder Cycle Design• The original 'Death' Series• Enhances your custom bike like no others• CNC machined from billet aluminum with

show chrome quality• Measures 61/2" in length with ball detent• 3/8" mounting bolt required to install• Sold in pairs644001 Twist pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644002 Crossed pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644003 Speared pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644004 Ball milled pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644005 Smooth pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

Crossed

Ball Milled

Speared

Smooth

Twist

Crossed

Twist

Smooth

Ball Milled

Speared

‘Death’ Series Smooth Shifter Pegs• The original ‘Death’ Series• CNC-machined from billet aluminum

with show chrome quality• Enhances your custom bike like no other• Includes 5/16" mounting bolt required to install

on forward controls644016 3"-long (sold each) . . . . . . . . . . . . . . . . . . . .$39.95

644017 4"-long (sold each) . . . . . . . . . . . . . . . . . . . .$49.95

‘Death’ Series Forward Control Footpegs by Thunder Cycle Design• The original 'Death' Series• Enhances your custom bike like no others• CNC machined from billet aluminum with show chrome quality• Measures 81/2" in length with ball detent• 3/8" mounting bolt required to install• Sold in pairs644011 Twist pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644012 Crossed pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644013 Speared pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644014 Ball milled pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

644015 Smooth pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$159.00

Hex-Shaped Footpegs by PerseHex design features hidden stainless steel hardware and a dual stainlesssteel ball detent that positively locates the pegs in position. Machined from6061-T6 grade aluminum, they are available in chrome, or a gloss blackanodized finish. Stainless steel mounting hardware included. Sold in pairs.190620 Chrome footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.95

190621 Black footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$152.99

190620

190621

Footpegs

.44 Magnum Footpegs by Choppers Inc.Polished aluminum ends with .44 magnum shell casings fit into the lathe-turned bodies. Footpegs feature 1/4" drilled dimples in a staggeredpattern. Available for rider or passenger. Sold in pairs. 111224 Rider pegs (71/2"-long, 3/8"-16 mounting) . . . . . . . . . . . . . . . . . . .$256.99

111225 Passenger pegs (31/2"-long, 3/8"-16 mounting) . . . . . . . . . . . . . .$245.99

111225

111224

Footpegs &

Foot C

ontrols

3.24

Footpegs

3


Custom Foot and Shifter Pegs by Paul Yaffe OriginalsChrome-plated, CNC-machined footpegs andshifter toe pegs designed by master customizerPaul Yaffe. Available in three different malemount styles including the ‘Billet and Rubber’which features a non-slip rubber grip surface.Matching grips are available for some styles.

Footpegs (sold in pairs)47655 Billet and Rubber . . . . . . . . . . . . . . .$116.99

47656 Billet Diamond . . . . . . . . . . . . . . . . .$116.99

47701 Billet Smooth . . . . . . . . . . . . . . . . . . .$116.99

Shifter Toe Pegs (sold each)47658 Billet and Rubber . . . . . . . . . . . . . . . .$36.99

47659 Billet Diamond . . . . . . . . . . . . . . . . . .$36.99

47702 Billet Smooth . . . . . . . . . . . . . . . . . . . .$36.99

Handlebar Grips (sold in sets)47700 Billet Smooth (not shown) . . . . . .$127.99

47655

47656

47702

47701

47658

47659

19638

12931

O-Rings

1292818827

12934

19953

19955

12933

Custom Chrome® O-Ring PegsKick Pedal and Shifter Pegs (sold each)19953 Kick pedal (flat) . . . . . . . . . . . . . . . . .$25.99

19955 Shift peg (short stud) . . . . . . . . . . . . .$9.49

Custom Pegs (sold in pairs)12928 3/8"-24 stud mount . . . . . . . . . . . . . .$22.99

18827 1/2"-20 stud mount . . . . . . . . . . . . . .$23.69

19638 Clamp-on . . . . . . . . . . . . . . . . . . . . . . .$24.49

190034 Fits 5/8" square bars used in most after market highway bars . . . . . . .$18.49

Note: When used as highway pegs, these footpegs shouldnot be used under normal stop-and-go operating conditions.

Passenger Pegs (sold in pairs)Fit most models from 1971 to present.12933 Standard length pegs

(repl. OEM 50901-84T) . . . . . . . . . . .$22.99

12945 Extended length pegs (1"-longer than stock) . . . . . . . . . . .$30.14

Driver Pegs (sold in pairs)Fit Sportster® models from 1954 thru 1990 and FX models from 1971 thru 198512931 Replaces OEM 52651-85T . . . . . . . .$25.99

Fit FXR models (except FXRD and FXRP) from 1982 thru 1994 and Sportster® and Dyna Glide models from 1991 to present (except Dyna Wide Glide® models)12934 Replaces OEM 50913-89T . . . . . . . .$40.99

Replacement O-Ring SetsContains enough O-rings for one footpeg.19956 Fits CC #19953 flat kick pedal, and

#12931 or #12934 driver pegs . . . . .$4.19

19957 For CC #19955 shift peg . . . . . . . . . . .$6.69

19958 For CC #12933 pegs or stud mount and clamp-on custom pegs . . . . . . . .$3.49

Billet Shift Peg Spacerby Paul Yaffe OriginalsProvides extended reach for easiershifting and braking. Made fromchrome plated aluminum. Fits allYaffe and Original Equipmentshifter toe pegs. . . . . . . . . . . . .$25.9947693 Sold each

Shifter Toe PegsWide selection of toe pegs in the market from stock to custom. Sold each.12974 Black rubber toe peg with chrome end cap

and short stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.39

12345 Stock replacement black rubber toe peg with short stud (repl. OEM 34611-65T) . . . . . . . . .$4.49

12346 Stock replacement black rubber toe peg with long stud (repl. OEM 34609-52T) . . . . . . . . .$4.49

19955 Round O-ring toe peg (repl. OEM 34631-84T) . .$9.49

Replacement O-Rings19957 Fits CC #19955 (repl. OEM 49030-84T) . . . . . . . . . .$6.69

19955

12974

12345

Discontinued

12346

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.25

Footpegs


27433

27436

27432

27430

2743427431

27435

Custom Chrome® ‘Knob End’ PegsInnovative exclusive design integrates a chrome-plated die-cast body with rubber inserts for a more comfy ride and hot looks. Sold in pairs.27431 Large, male mount . . . . . . . . . . . . . .$52.89

27432 Large, female mount . . . . . . . . . . . .$49.54

27433 Large, 5/8" female mount . . . . . . . .$49.54

27434 Small, male mount . . . . . . . . . . . . . . .$49.89

27435 Small female mount . . . . . . . . . . . . .$48.49

27436 Small, 5/8" female mount . . . . . . . .$47.94

Knob End Shifter Toe Peg27430 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$12.89

Landmark ‘Diamond II’ FootpegsThese chrome-plated billet aluminum, Landmarkpegs provide great value and outstanding cus-tom looks.16541 Male mount footpegs (pair) . . . . . .$90.99

16542 Shifter toe peg (sold each) . . . . . . .$28.99

‘Knurled’ Passenger Footpegs by Accutronix®

Great looking foot pegs made in the U.S.A. frombillet aluminum and then flawlessly chrome-plated. Features unique ‘Knurled’ design. Sold in pairs.656692 ‘Knurled’ rear footpegs . . . . . . . . .$128.60

Optional Matching Hand Grips656690 ‘Knurled’ hand grips

(sold in pairs) . . . . . . . . . . . . . . . . . . .$119.55

'Tribal' Footpegs by Accutronix®

Unique design to compliment your custom bike.Machined from billet aluminum with showchrome quality finish. Matching hand grips andforward controls available. Measures 6" inlength. Sold in pairs. . . . . . . . . . . . . . . . . . . . .$162.88644041 Fits all models with female-style clevis

27175

27157

27167

27177

Mirage® FootpegsBy combining our chrome and ribbed footpegswith the Mirage® design we’ve added a newstyling accent to complete the integrated lookachieved with Mirage® accessories like derbyand point covers, air cleaner insert, master cylinder cover, gas caps and many otheritems. Sold in pairs.27157 Large, male mount . . . . . . . . . . . . . .$54.49

27167 Large, 5/8" female mount . . . . . . . .$54.49

27169 Large, female mount . . . . . . . . . . . .$49.99

27175 Small, male mount . . . . . . . . . . . . . . .$46.99

27176 Small, female mount . . . . . . . . . . . . .$49.99

27177 Small, 5/8" female mount . . . . . . . .$45.84

‘Ali-Baba’ Footpegs by Paul YaffeFootpegs and shifter toe peg feature the samequality and attraction as our existing ‘Ali-Baba’line of parts. Machined from 6061-T6 billet alu-minum and chrome-plated.600048 Footpegs (sold in pairs) . . . . . . . . .$109.99

600049 Shifter toe peg (sold each) . . . . . . .$41.99

Footpegs &

Foot C

ontrols

3.26

Footpegs

3


Chrome and Rubber Band PegsMount to the Original Equipment or aftermarket footpeg clevis’ on mostmodels. Perfectly match our CC #’s 12165 and 12166 Handlebar Grips.46107 Large, female mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$59.99

46110 Small, male mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . .$52.29

46111 Small, 5/8" female mount (sold in pairs) . . . . . . . . . . . . . . . . . . . .$59.99

46112 Shifter toe peg (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.29

Replacement Parts18966 Mount, large female (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$18.49

18967 Mount, 5/8" female (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . .$18.49

18968 Mount, male (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.14

46114 Rubbers (large footpeg) set of 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.14

46116 Rubbers (shifter toe peg) set of 2 . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.69

46010

12174

Chrome and Ribbed Rubber PegsMount to the Original Equipment or aftermarket footpeg clevis’ on mostmodels. The perfect match to our CC #12900 Handlebar Grips.46010 Large, female mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$41.74

46011 Large, male mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . .$40.24




46016 Kicker pedal (sold each) not shown . . . . . . . . . . . . . . . . . . . . . . . .$27.19




25193 Replacement countersunk bolt (pack of 10) . . . . . . . . . . . . . . . .$16.14

46011

12172

4601346014

46015

12173

Chrome Spur PegsMount to the Original Equipment or aftermarket footpeg clevis’ on mostmodels. Perfectly match our CC #12169 Handlebar Grips.46101 Large, female mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$46.89








25193 Replacement countersunk bolt (pack of 10) . . . . . . . . . . . . . . . .$16.14

4610146102

12172

46104

46105

46106

12173

12174Discontinued

18966

46110

46111

46112

18967

46107

18968

‘Live to Ride’ FootpegsChrome-plated, steel footpegs feature replaceable anti-vibration rubberisolation pads with “Live to Ride” motto.46125 Small, male mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99



46128 Large, female mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . .$45.99

46130 Kicker pedal (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.69

Replacement Parts18966 Mount, large female (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . .$18.49



46134 Rubbers (small pegs) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99

46135 Rubbers (large pegs) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . .$11.99

46136 Rubber (shifter toe peg) sold each . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99

46137 Rubber (kicker pedal) sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.34

46125

46126

46127 46128

46129

46130

18966

18967

1896846134

4613546136

46137

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference


Footpegs

Accutronix® Billet FootpegsGreat looking pegs made in the USA from billetaluminum and then flawlessly chrome-plated.They’re swaddled in vibration-absorbing rubberto provide a high level of comfort. . . . . . .$128.9944498 Male mount (sold in pairs)

27380$51.39

27175$46.99

27385$49.99

27387$44.99

27384$49.99

27386$44.99

27382$14.39

27383$32.89

n/a n/a n/a 27627$45.49

n/a 27628$45.49

n/a 27655$34.89

n/a n/a 46255$49.99

46257$45.49

46254$49.99

46256$45.49

n/a n/a

n/a 46501$45.49

46505$49.99

46507$45.49

46504$49.99

46506$45.49

46502$13.99

46503$31.39

Male LargePeg

Mirage®

Inferno®

Rick Doss Eclipse

Rick Doss Speed Line

ShifterPeg

GripSet

MaleSmallPeg

5/8"FemaleSmallPeg

5/8"FemaleLargePeg

FemaleSmallPeg

FemaleLargePeg

Custom Chrome®

Mini-Rib Footpeg and Grip SetsMirage® or Inferno®, Rick DossSpeed Line or Eclipse - pickyour pegs and grips to matchother accessories and get justthe look you want. Distinctivemini-rib designs look greatwith one-piece designer capsintegral with the slotted framethat holds shock-absorbingribbed rubber inserts. Sold inpairs (except shifter peg).

Extended O-Ring Footpegs1"-longer than regular O-ring pegs for morecomfort when riding two-up. They match ourentire line of O-ring pegs and have replaceablerubber O-rings. Sold in pairs.12945 Fit most models from 1971

to present . . . . . . . . . . . . . . . . . . . . . . .$30.14

19958 Replacement O-rings (pack of 12) .$3.49

46021

46020

46022

Oval Ribbed FootpegsLarge oval-shaped footpegs provide a morecomfortable footrest, and add a nice visualaccent. Sold in pairs.46020 Male mount . . . . . . . . . . . . . . . . . . .$53.99

46022 Female mount . . . . . . . . . . . . . . . . .$51.99

46021 5/8" female mount . . . . . . . . . . . . .$51.99

Footpegs &

Foot C

ontrols

3.28

Footpegs

3


18961

18962 18963

18964

18966

18967

18969

18970

18971

18960

Vibra-Kushion™ FootpegsThese state-of-the-art chrome-plated footpegs havean innovative design which provides custom stylingand superior comfort. Other features of these pegsinclude replaceable hollow-core wear-resistant rub-ber insert cleats and interchangeable steel mount-ing clevis’. Fit most early and late-model bikes.

Vibra-Kushion™ Footpegs (sold in pairs)18960 Small, male mount . . . . . . . . . . . . . . . . .$39.24

18961 Small, 5/8" female mount . . . . . . . . . . .$36.49

18962 Large, male mount . . . . . . . . . . . . . . . . .$44.29

18963 Large, female mount . . . . . . . . . . . . . . .$39.49

190130 Clamp on pegs. Fits 1" and 11/4" frame or engine guard tubing . . . . . . . . . . . . .$48.49

190042 Stud mount 1/2"- 20 . . . . . . . . . . . . . . . .$40.99

Shifter Pegs and Kicker Pedal (sold each)18964 Standard length toe peg . . . . . . . . . . . .$15.64

18974 Extended toe peg (31/2"-long) . . . . . . .$18.49

18965 Kicker pedal . . . . . . . . . . . . . . . . . . . . . . . .$35.99

Replacement Parts18966 Mount, large female (sold in pairs) . .$18.49

18967 Mount, 5/8" female (sold in pairs) . . .$18.49

18968 Mount, male (sold in pairs) . . . . . . . . .$17.14

18969 Rubbers (small footpeg) set of 8 . . . .$10.99

18970 Rubbers (large footpeg) set of 8 . . . .$13.19

18971 Rubbers (shifter toe peg) set of 3 . . . . .$5.99

18972 Rubbers (kicker pedal) set of 4 . . . . . . .$7.99

Note: None of these footpegs or replacement parts are inter-changeable with their ‘KüryAkyn™ Iso-Peg™’ counterparts.

18968

18974

Pro-One™ Chrome FootpegsChrome-plated billet with ball milled detail in one-piece male mount or a unique adjustable design that allows theangle of the foot surface to be adjusted forward or back relative to the angle of the mount. For all models using male mount pegs65127 One-piece pegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95

65130 Adjustable pegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$115.95

65174 Shifter toe peg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95

65127

6517465130

‘Dually’ Iso-Pegs™ by KüryAkyn™

With the same vibration-absorbing materialused on standard Iso-Pegs™, the chrome-platedfootpegs have more isolation pads and twicethe surface area for extra comfort. . . . . . .$59.9948227 Male mount (sold in pairs)

‘Retro’ Footpegs by KüryAkyn™

Features the same vibration-absorbing materialthat is used in the classic Iso-Pegs™ but with asleeker tread, and a new, trimmer profile for thebody of the footpeg. 48247 Male mount (sold in pairs) . . . . . . .$57.99

191031 Replacement retro footpeg pads (4 pieces) . . . . . . . . . . . . . . . . . . . . . . . .$16.99

Rubber Footpegs with Chrome EndsDie-cast footpegs with rubbersleeves and chrome ends. Fit a variety of applications includingaftermarket highway peg sets.12990 Passenger pegs

(sold in pairs) . . . . . . .$27.54

12974 Shifter toe peg (sold each) . . . . . . . . . .$8.39

12990

12974

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.29

Footpegs & Stirrups


Iso-Stirrup™ Sets by KüryAkyn™

Chrome-plated stirrups with rubber heel supports adjust toany angle for the comfort and support of floorboards withoutthe bulky look. They’re available with large or small-diameterIso-Pegs™ or without pegs for those with another preference,and mount to female clevis‘. Sold in pairs.48029 Iso-Stirrups with large-diameter Iso-Pegs™ . . . . .$89.95

48030 Iso-Stirrups with small-diameter Iso-Pegs™ . . . . .$99.99

48028 Iso-Stirrups ONLY without footpegs . . . . . . . . . . .$69.95

48034 Replacement heel rubbers . . . . . . . . . . . . . . . . . . . . .$8.44

48028

48029

48030

Iso-Pegs™ by KüryAkyn™

State-of-the-art chrome-plated footpegs have aninnovative design which provides custom styling andgreat comfort. Other features include replaceablehollow-core wear-resistant rubber insert cleats andinterchangeable mounting clevis. Iso-Pegs™ may beused on early or late-model bikes.

Iso-Pegs™

48250 Small, male mount (sold in pairs) . . . . .$38.29

48251 Small, 5/8" female (sold in pairs) . . . . . .$38.29

48252 Large, male mount (sold in pairs) . . . . .$41.29

48253 Large, female mount (sold in pairs) . . .$41.29

48004 Shifter toe peg (sold each) . . . . . . . . . . .$15.59

060020 Shift peg, longhorn. 7/8" longer than standard shift peg with 4 rubbers . . . .$21.49

Replacement Parts48006 Mount, large female (sold in pairs) . . . .$9.84

48007 Mount, 5/8" female (sold in pairs) . . . . .$9.95

48008 Mount, male (sold in pairs) . . . . . . . . . . .$10.89

48009 Rubbers (small footpeg) set of 8 . . . . . . .$9.99

48010 Rubbers (large footpeg) set of 8 . . . . . . .$9.95

48011 Rubbers (shifter toe peg) set of 3 . . . . . .$4.25

Note: None of the footpegs or replacement parts listed areinterchangeable with their ‘Vibra-Kushion’ counterparts.

48011

48009

48008

48010

48007

48006

48004

48252

48250 48251

48253

Vibra-Kushion™ Footpeg StirrupsGet more comfort without adding floorboards.These stirrups use our Vibra-Kushion™ footpegs,and are adjustable so that you get the rightamount of heel support. Include male clevis’that fit large or small-diameter Vibra-Kushion™

footpegs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.9918973 Set of two

KüryAkyn ISO®-Peg ExtendersExtended comfortable ISO®-Pegs are the way to get around extendedcarb/manifolds, hot pipes and open primaries. Extended pegs may reducecornering ground clearance. Check clearance before and after installation.190117 Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95

Stash Tube FootpegChrome knurled footpeg with rub-ber belting. Threaded end capunscrews to reveal a 5/8" x 25/8"stash area. See matching grips CC #111215. Sold in pairs.190161 Male mount. Fits all

FXR, FXWG, andSoftail® models . . . . .$77.99

Footpegs &

Foot C

ontrols

3.30

Footpegs

3


‘Century’ Passenger Pegs by Billet ConceptsChrome-plated billet aluminum with grippy rub-ber inserts. Pegs click up and down on springloaded ball bearings to ensure no flop or rattles.47374 Sold in pairs . . . . . . . . . . . . . . . . . . . .$149.99

Chrome Passenger Peg Sets by Billet ConceptsInclude the mounting clevis for a custom look.They match the pegs used in our forward con-trol kits (see pg 3.07). Fit all applications thatuse a threaded clevis to mount footpegs. Sold in pairs.47339 Rubber belted style . . . . . . . . . . . . .$149.99

47340 Ball milled style . . . . . . . . . . . . . . . . .$149.99

47340

47339

Ness-Tech® FootpegsMale mount footpegs made of chrome-platedbillet aluminum. Sold in pairs.05684 Twister . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

05744 Twister (black painted) . . . . . . . . .$119.95

05020 Flamed . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

05042 Grooved . . . . . . . . . . . . . . . . . . . . . . . .$89.95

05746 Grooved (black painted) . . . . . . .$119.95

05048 Knurled . . . . . . . . . . . . . . . . . . . . . . . .$89.95

05757 Diamond . . . . . . . . . . . . . . . . . . . . . . .$89.95

05318 Diamond Flatband . . . . . . . . . . . . . .$89.95

05970 Stepped . . . . . . . . . . . . . . . . . . . . . . . .$89.95

648306 Battistini Round Hole . . . . . . . . . .$119.95

648308 Battistini Oval Hole . . . . . . . . . . . .$119.95

Replacement Parts05054 Footpeg rubbers (pack of 8) . . . . .$13.99

Ness-Tech® Shifter Toe PegsMade of chrome-plated billet aluminum. Sold each.05686 Twister . . . . . . . . . . . . . . . . . . . . . . . . .$34.95

05745 Twister (black painted) . . . . . . . . . .$46.99

05022 Flamed . . . . . . . . . . . . . . . . . . . . . . . . .$32.85

05046 Grooved . . . . . . . . . . . . . . . . . . . . . . . .$34.95

05747 Grooved (black painted) . . . . . . . .$46.99

05052 Knurled . . . . . . . . . . . . . . . . . . . . . . . .$29.95

05759 Diamond Twist . . . . . . . . . . . . . . . . . .$34.95

05319 Diamond Flatband . . . . . . . . . . . . . .$34.95

05809 Stepped . . . . . . . . . . . . . . . . . . . . . . . .$34.95

648307 Battistini Round Hole . . . . . . . . . . .$44.95

648309 Battistini Oval Hole . . . . . . . . . . . . .$44.95

Replacement Parts05055 Toe peg rubbers (pack of 4) . . . . . .$7.99

05318

05319

05970

05809

05757

05759

05046

05042

05052

05048

05020

0502205686

05684

05744

05745

Also Available in Black

648306

648307

648308

648309

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.31

Footpegs


12987

Extended Pegs for Forward ControlsLonger than the stock pegs by over an inch for additional comfort when aircleaner, or tanks have made pegs difficult to use. Use as passenger pegs tohelp clear Shotguns or other custom exhaust equipment. Sold in pairs.12979 Original Equipment-style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.64

12987 Chrome end cap style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.59

12988 Black replacement rubbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99

12979 Doss ‘Eclipse’ 5-Rib FootpegsOur ‘Eclipse’ pegs have a 5-rib design with fewer, but wider rubber ribs fora new custom look. They have the ‘Eclipse’ crescent shape on the endswhich match our grips and other ‘Eclipse’ accessories.46262 Large, female mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

46263 Small, male mount (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99


46263

discontinued

46260

4626446262

23193

23194

23195

23196

‘Radial Series’ Footpegs and Brake Pedal Cover Kitsdesigned by Radial Components, LLCChrome die-cast footpeg kits are made to fit all models with female foot-peg mounts from 1965 thru 2002. They’re available in small and large sizesand feature adjustable male ends which permits them to be rotated to aposition that provides maximum comfort.23193 Large footpegs (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99

23194 Small footpeg (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.99

23195 Shifter toe peg (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.49

Brake Pedal Cover KitsChrome die-cast brake pedal cover kits are available in small and large sizes.Small Cover Kit23196 Fits FX Softail® and Dyna Wide Glide® models from 1984 thru 2002,

and 4-speed FXWG models from 1983 thru 1986 . . . . . . . . . . . . . .$31.99

Large Cover Kit23197 Fits all 5-speed models with floorboards

from 1980 thru 2002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99

23197

Ness-Tech® ‘Torpedo’ Footpegs• Footpegs are 1"-longer than factory units for increased comfort• Shifter pegs are slightly longer than stock• CNC-machined from billet aluminum• Matching handlebar grips and fork legs are also available• Chrome-plated04944 Male footpeg (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

04945 Shifter peg (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95

648330 Replacement footpeg rubbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.95

Footpegs &

Foot C

ontrols

3.32

Footpegs

3


JayBrake Footpegs and Shifter Toe PegsHigh-quality products made from 6061 T6 billet aluminum that permit youto match all of your bike’s footpegs and shifter peg needs.

FootpegsSold in pairs.07504 1.25"-diameter Wide Bands male mount footpegs . . . . . . . . . .$136.45

07505 1.25"-diameter Full Rubber male mount footpegs . . . . . . . . . .$136.45

07506 1.25"-diameter Dove Tail Strips male mount footpegs . . . . . .$171.45

07510 Full Rubber folding footpegs (mount with 3/8-16" bolts) . . . .$152.95

07513 Wide Bands folding footpegs (mount with 3/8-16" bolts) . . .$152.95

07516 Dove Tail Strips folding pegs (mount with 3/8-16" bolts) . . . .$181.95

Shifter Toe PegsSold each.07519 Full Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.99

07520 Wide Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48.99

07521 Dove Tail Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66.99

07516

0751007505

07506

07520

07519

07521

07504 07513

Stock Replacement Large Diameter FootpegsSteel peg set with rubber covers. Fits FL models from 1941 thru 1984, FX models from 1971 thru 1985 (except FXST and FXWG models), andSportster® and K models from 1954 thru 1999. Sold in pairs.190002 Footpeg set (replaces OEM 50939-52) . . . . . . . . . . . . . . . . . . . . . . . .$19.99

12244 Replacement rubbers (replaces OEM 50940-52T) sold in pairs . . .$4.19

19000212244

47105

47104

47103

Supreme Legends USA Chrome Billet FootpegsFolding pegs for forward controls are also adaptable to mounting to anyflat surface. Folding passenger pegs are available with straight or angledmount in standard male design. Sold in pairs.47103 Folding driver footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$106.00

47104 Angle mount passenger pegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.00

47105 Straight mount passenger pegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.00

Supreme Legends USA ‘Premium’ Chrome Billet Footpegs‘Target’ end-cap designed to match Legends forward control kits for a clean, integrated look, or they can be used alone. Sold in pairs.47839 Three band rubber with male mounts . . . . . . . . . . . . . . . . . . . . . . . .$77.00

47848 Three band rubber with folding female mounts . . . . . . . . . . . . .$106.00

47839

47848

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.33

Footpegs & Footpeg Kits


Adjustable Passenger FootpegMounting KitChrome steel footpeg kit permits you to boltfootpegs to the swingarm pivot bracket on‘Touring’ and FXR models where floorboardmounting brackets have traditionally been in-stalled. Permits the footpegs to be rotated in a360º arc providing a wide range of adjustment.Includes chrome-plated left and right-side pivotbrackets, extensions, adjustable bracket andarm, clevis’ and all necessary hardware forinstallation. Fits all Touring and FXR modelsfrom 1980 to present. . . . . . . . . . . . . . . . . . . .$261.9946121 Complete kitNote: Passenger footpegs are not included in the kit.

Retractable Passenger Footpegsby KüryAkyn™

Provides the passenger with an alternatefootrest by moving the pegs up and forward.Folds back out of the way behind the passengerfloorboards when not in use. Includes Iso-Peg™

footpegs. Sold in sets. . . . . . . . . . . . . . . . . . . .$159.9948234 Fits all Touring models from 1993

thru 1998 Adjustable Passenger’s Footpeg Kit for FXR and Softail® ModelsDesigned to bolt to the passenger footpeg mounting point on all FXR models. Permits pegs to berotated in a 360° arc. Kit includes everything for installation (except footpegs) and features chrome-plated components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$144.9909901 Fits FX Softail® and FLST models from 1984 thru 1999, and FLSTC models from late 1987 thru

1989 (1990 thru 1999 FLSTC should use CC #09903)09903 Fits all FXR models from 1982 thru 1994 and FLSTC models from 1990 to presentNote: Passenger footpegs are not included in the kit.

Adjustable Footpeg Kit for Models with Forward ControlsFits into the female footpeg clevis’ on models with forward controls. Pegs may be rotated in a 360° arc. Kit includes everything necessary to make the conversion (except footpegs) and features flawless chrome-plating on the individual components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$111.9909890 Fits Dyna Wide Glide®, FX Softail® and 4-speed FXWG models from 1983 to presentNote: Passenger footpegs are not included in the kit.

09903

09901

09903

09901

Passenger Pegs for FX ModelsReplacement peg sets with chrome ends(replaces OEM 50907-69A).26431 Rubber peg set (sold in pairs) . . .$37.99

190042 Vibra kushion peg set . . . . . . . . . .$40.99

190044 Chrome O-ring peg set . . . . . . . . .$36.49

Chrome Rear Footrest Bracket SetsReplacements for the rear brackets on 4-speedFX models thru 1981, or can be used to replacethe 1982 and later one-piece welded andstamped rear footrest brackets, and the largealuminum rear brackets fitted to 4-speed FLmodels from 1977 thru 1984.26366 Left and right brackets alone

(1/4" steel plate) . . . . . . . . . . . . . . .$18.49

26367 Bracket set (includes supports and mounting hardware) . . . . . . .$33.49

26367

26366

190042

26431

190044

Footpegs &

Foot C

ontrols

3.34

Footpeg Kits

3


Highway Peg KitsBeautiful show-chrome fold-up footrests for comfortable cruising in style.Include all hardware necessary for easy installation.Note: These peg sets should not be used under normal stop-and-go operating conditions.

For 4-speed Big Twin Modelsfrom 1958 thru 1985 (except 4-Speed FXWG and Softail® Models)Note: Models without the factory-installedright-side frame mounting tab must install a CC #17503 Weld-On Frame Tab.

25299 O-ring style . . . . . . . . .$48.49

26334 Wing style . . . . . . . . . .$40.99

For FXR Models from 1982 thru 199425298 O-ring style . . . . . . . . .$51.49

26340 Wing style . . . . . . . . . .$43.99

Chrome Highway Peg Brackets for Dyna Glide ModelsThe perfect addition to Dyna Super Glide®

models or to replace stock mounts on all mid-shift Dyna Glide models from 1991 to present. Includes brackets, footpeg mounts and hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . .$67.7925256 Replaces OEM 49019-95 (sold in sets)

For Sportster® ModelsModels from 1952 thru 1981

26052 O-ring style . . . . . . . . .$48.49

26335 Wing style . . . . . . . . . .$40.99

Models with Generator from 1982-Early 1984

26331 O-ring style . . . . . . . . .$49.99

26333 Wing style . . . . . . . . . .$42.49

Colony Acorn Highway Peg Mounting KitExtended acorn studs simplify installation of highway pegs.36134 Fits Sportster® models from

1957-early 1984 . . . . .$14.99

190185

190186

Highway Bracket Kit with LightsThese chrome highway bracket kits have 12-voltmarker lights built into the peg extensions, mak-ing you more visible at night. All necessarymounting hardware is included. . . . . . . . .$112.99190185 Fits FXR models from 1982 thru 1994190186 Fits Dyna Glide models from 1991

thru 1999

Weld-On Frame TabWeld-on right hand side frame mounting tabfor all late model 4-speed Big Twins without the Original Equipment mounting tab. For forward controls. . . . . . . . . . . . . . . . . . . . . .$6.5417503 Sold each

Clamp-On Footpeg SetsClamp-on footpeg kits with three different styles of footpegs come com-plete with three-piece chrome frame clamps in 1", 11/8" or 11/4" diameters.The 1" kits will fit most aftermarket frames, and the 11/8" kits fit most 4-speed or Softail® frames and 1957 thru 1981 Sportster® models, as well asOriginal Equipment highway bars. The 11/4" kits will fit all Sportster® framesfrom 1982 to present and all 5-speed frames.

1" 11/8" 11/4"18881 18884 18887 with O-ring pegs . . . . . . . . . . . . . . . . . . . . . . . . .$52.99

18882 18885 18888 with Iso Pegs™ . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

18883 18886 18889 with rubber pegs . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

18885

18881

18889

Transmission Mount PassengerPeg Bracket for Big TwinsFits Big Twins with rigid frames. Use with any3/8" stud-mount footpegs. . . . . . . . . . . . . . . .$51.4912686 Sold each

Footpeg Anti-Sag D-ClipsTake the sag out of droopy male mount footpegs.Replace the Original Equipment D-clips with springsteel D-clips that have a integral shim to put pegsback to a flat and level position. . . . . . .$2.05 per pr.12704 Card of ten pairs

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.35

Footpeg Kits


Passenger Peg Kits for Softail® ModelsThis kit mounts in the existing tapped holes (1/2"-13) in the frame belowthe seat to provide an alternate footrest position for the passenger. It fitsall Softail® models from 1984 thru 1999 however, it is not recommended foruse on FL Softail® models, due to the width of the stock seats. Includesindexing washers.13005 Complete kit with footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99

13006 Complete kit w/out footpegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.49

190012

190178

Chrome Passenger Peg Kits for Sportster® ModelsFit Sportster® models from 1983 thru 1999. Hardware is included.190012 Kit with chrome O-ring pegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.89

190178 Kit with Comfort Cruise pegs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99

Rear Passenger Peg Set for Sportster® ModelsSpecial design mounting blocks utilize the threaded lugs in the OriginalEquipment swingarm, and the pegs provided are our world famous O-ringpegs. Sold in sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.9912930 Fit all Sportster® models from 1983 thru 2003

Mid Foot Control Kit for V-Rod® Models by Kosman Specialties• Designed to provide a different riding position• A preferred position for comfort an sport riding• A complete bolt-on kit supplied with all necessary hardware

and easy to follow instructions• Will only fit with aftermarket exhaust such as Vance & Hines®, or

Screamin’ Eagle® exhausts – will not fit with stock exhaust system• The parts are machined out of aircraft grade aluminum alloy

with a silver powder-coat finish644039 Fits all V-Rod® models from 2002 to present . . . . . . . . . . . . . . . .$445.00

12994

Chrome Midmount Footpeg KitsProvide the rider with an alternate place to rest his feet. These kits includea right-side mounting bracket, a new chrome inspection cover, footpeg cle-vis’, mounting hardware and rubber footpegs with chrome ends. The mid-mount bracket and hardware are also available without the footpegs ortheir mounting clevis’ if footpegs other than those supplied are desired.12994 Complete kit with brackets and footpegs for 5-speed FX Softail®

models from 1986 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.99

12996 Mounting brackets ONLY for 5-speed FX Softail® models from 1986 thru 1999 (footpegs not included) . . . . . . . . . . . . . . . . .$45.83

Note: When used as highway pegs, these footpegs should not be used under normal stop-and-go operating conditions.

Forward Peg Set for Late Sportster® ModelsEasy-to-install and complete with a pair of chrome O-ring footpegs and all necessary hardware. Fits between the lower front engine mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.4926341 Fits alternator-equipped Sportster® models from late 1984 thru 1997Note: This peg set should not be used under normal stop-and-go operating conditions.

Footpegs &

Foot C

ontrols

3.36

Footpeg Mounts

3


Chrome Passenger Peg MountsStock replacement for Sportster® models from1983 to present. Perfect for adding rear pegs to these bikes. Sold in pairs. . . . . . . . . . . . . .$25.9912932 Replaces OEM 50610-86TNote: Passenger footpegs are not included in the kit.

3-Piece Frame ClampsChrome-plated, 3-piece design eliminatesspreading the clamp to fit over frames. Sold each.15200 7/8" clamp . . . . . . . . . . . . . . . . . . . . . .$7.99

11235 1" (repl. OEM 50904-85T) . . . . . . . .$5.89

11237 11/8" (repl. OEM 50905-85T) . . . . .$5.89

11236 11/4" (repl. OEM 50903-85T) . . . . .$5.89

Highway Peg Blocks for Sportster® ModelsWhen combined with footpegs, these chromesteel blocks provide increased comfort. Includerequired mounting hardware, and measureapprox. 61/2"-long. Sold in pairs. . . . . . . . . . .$34.9912935 For alternator Sportster® models from

1984 to present (repl. OEM 49159-88T)Note: Highway pegs should not be used under normal stop-and-go operating conditions.

‘50's Boy’ Footpeg ExtensionsMade from cold-rolled steel to fit stock-stylefootpegs. They may be used to move pegs fur-ther from the centerline of the bike, and fit anystock-style female clevis. Footpegs are not in-cluded. Sold in pairs. . . . . . . . . . . . . . . . . . . . . .$99.9918003 2"-long

Frame ClampsThese chrome investment cast clamps arestronger than aluminum or flat steel clamps.Designed by Radial Components, LLC. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.6922608 1"-diameter clamp22609 11/8"-diameter clamp

Bullet-Style Footpeg Supports3/8"-24 StudZinc-plated. Fits FL models from 1965 thru 1984and FX models from 1971 thru 1985. . . . . . .$8.2912970 Replaces OEM 50973-65 (sold each)

1/2"-20 StudZinc-plated. Fits FL models from 1941 thru 1964and FX models from 1971 thru 1972. . . . . .$10.1912971 Replaces OEM 52683-74 (sold each)

12971

12970

Chrome Footpeg Clevis’Universal clevis’ for most stock or aftermarketfootpegs with male shanks. Include hardware.Sold in pairs.13004 With female bolt mount . . . . . . . .$24.49

13006 With male stud mount . . . . . . . . .$24.49

17568 Footpeg bolt, nut and spring clip only (sold each) . . . . . . . . . . . . .$2.49

13004

Chrome Passenger Peg Brackets for Softail® ModelsInstall under the stock mounting screws thatattach the fender struts to the frame. Designedto relocate the Original Equipment passengerfootpegs to a more comfortable position forpassengers who lean against the sissybar. Fit allSoftail® models from 1984 to present. . . . .$26.6913007 Sold in pairs (footpegs not included)

Chrome Rear Footrest BracketsReplacements for the rear brackets on 4-speedFX models thru 1981, or can be used to replacethe 1982 and later one-piece welded andstamped rear footrest brackets, and the largealuminum rear brackets fitted to 4-speed FLmodels from 1977 thru 1984.26366 Left and right brackets alone

(1/4" steel plate) . . . . . . . . . . . . . . .$18.49

26367 Bracket set (includes supports and mounting hardware) . . . . . . .$33.49

26367

26366

Ness® 11/4" Clamp-On Peg Mountfor Crash Bars• Chrome-plated, die-cast design• Accepts male mount footpegs648305 Sold in pairs . . . . . . . . . . . . . . . . . . . . .$49.95

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.37

Footpeg Mounts & Extensions


Chrome Footpeg Extensions for Forward ControlsInstall in the Original Equipment shifter and brake control brackets, theymove your footpegs lower and farther forward. Machined from 3/8"-thick,steel plate. Includes chrome-plated footpeg clevis’ and hardware. . . . .$59.9912680 Fits FX Softail®, Dyna Wide Glide® and 4-speed FXWG models

from 1983 to presentNote: These peg extensions will reduce ground clearance and increase the distance from theOriginal Equipment footpegs to the brake and shift controls.

Footpeg Anti-Sag D-ClipsTake the sag out of droopy male mount footpegs.Replace the Original Equipment D-clips with springsteel D-clips that have a integral shim to put pegsback to a flat and level position. . . .$2.05 per pair12704 Card of ten pairs

19961

19960

19959

Replacement Footpeg BarsChromed steel bars for 5/8" female mount foot-pegs. Includes a 3/8"-16 x 3/4" grade 5 chrome-plated bolt and lockwasher. Use as replacementsfor broken pegs. Sold each.19959 2"-long . . . . . . . . . . . . . . . . . . . . . . . . . .$8.34

19960 4"-long . . . . . . . . . . . . . . . . . . . . . . . . . .$9.84

19961 5"-long . . . . . . . . . . . . . . . . . . . . . . . . .$11.14

Passenger Peg BracketsThese chrome billet rear footpeg brackets fea-ture ball mill design and a sloped contouredshape. They extend the rear pegs further for-ward providing the passenger with a more com-fortable ride. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85.99190202 Fits all Softail® models from 1984 thru

1999 or custom applications

Offset Chrome Footpeg ExtensionsProvide long-legged riders with an inexpensive method of stretching outtheir legs without moving their controls. They move the footpegs out 31/2"from the centerline of the motorcycle and 2" forward. Fits FX Softail®, Dyna Wide Glide® and 4-speed FXWG models from 1980 to present. . . .$40.9919966 Sold in pairs (footpegs not included)Note: These peg extensions will reduce ground clearance and increase the distance from theOriginal Equipment footpegs to the brake and shift controls.

Passenger Footrest Kit for FXR Models3/8" steel plates that relocate the passengerpegs several inches up and forward, forimproved comfort. The brackets can utilize stock footpegs or CC’s 1/2" stud-mount footpeg sets (footpegs not included). Includeschrome hardware. . . . . . . . . . . . . . . . . . . . . . . .$55.9926426 Fits FXR models from 1982 thru 1990

Chrome Billet Footpegs by JardineThese ball-milled chrome billet footpegs haverubber band inserts, and are perfect for high-way bars, extra frame-mounted footrests or forany custom application where clamping to 1" to 11/4" inch tubing is desired. . . . . . . . . . .$148.9528394 Sold in pairs

Shift Linkages by Paul Yaffe Originals• Perfect addition to your custom bike• Carved from 6061 T-6 aluminum and then

beautifully chrome-plated• Available in 2 styles• Fit all 5-speed Softail® models from 1986 to

present (except FLSTS models from 1997 thru 2003)

• Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99600020 ‘Groovy Missing Link’600021 ‘Holy Missing Link’

Footpegs &

Foot C

ontrols

3.38

Shift Linkages

3


Pro-One™ Chrome Shifter RodsReplaces the Original Equipment shifter rod onall 5-speed Softail® models from 1986 to present(except FLSTS models from 1997 thru 2003). . . . . . . . . . . . . . . . . . . . . . . . . .$62.9565141 Ball milled65142 Cut-out style65179 Ball milled, for extended forward con-

trols (3"-longer than stock)

19318

19294

Chrome Shift LinkageMeasures 103/4"-long with 5/16"-24 threads, andis chrome-plated. Fits Dyna Wide Glide® and 5-speed Softail® mod-els with forward controls from 1986 to present(except FLSTS models from 1997 thru 2003), aswell as other custom applications.19294 Complete kit

(replaces OEM 33728-90A) . . . . . . .$36.49

19318 Shifter rod ONLY (replaces OEM 11729) . . . . . . . . . . . . .$8.34

19318

19317

19511

19513

Chrome Shifter LinkageIncludes gear shifter rod end, shoulder bolt withlocknut, shifter rod and clevis. Fits 1971 thru 1973 FX models and1952 thru 1984 FL foot shift models. . . . . .$29.9919317 Complete kit

Chrome Shifter RodFits all Softail® models from 1986 to present(except FLSTS models from 1997 to present).19318 Replaces OEM 11729 . . . . . . . . . . . . . .$8.34

Chrome Rod EndFits all Big Twins from 1937 thru 1966 with handor foot shift. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.8919511 Replaces OEMs 33870-51, 33871-67

Chrome Clevis PinsThese chrome-plated clevis pins include thewasher and cotter pin. Fits many applicationsfrom 1930 to present. . . . . . . . . . . . . . . . . . . . .$12.4919513 Replaces OEM 42269-30 (pack of 10)

‘Shift and Glow’ Lighted ShifterRods by Glow-Job™

A unique part that will make your bike standWAY OUT in any crowd! They feature neonlighting on a polished stainless steel shift rod.New heim joints are not even necessary, just useyour existing ones to hook the ‘Shift and Glow’right up. It's fully adjustable and will make anybike look like a custom masterpiece! They fit all5-speed Softail® models from 1986 to present(except FLSTS models).690212 Yellow . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

690213 Green . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

690214 Orange . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

690215 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

690216 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

690217 Purple . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95

‘Landry’ Shift Linkage by Paul Yaffe OriginalsThis unusual link was originally created from themind of veteran machinist Brian Landry. It has somany facets that light dances off the beautifulchrome-plating like a diamond ring! . . . .$159.99600035 Measures 12"-long with 5/16" male

heim joints

Chrome Steel Shift Linkage by Motherwell ProductsQuality chrome-plated steel shift linkage ismachined with slotted detail on each side. Fits 5-speed Softail® models with Original Equip-ment forward controls from 1986 to present(except 1997 thru 2003 FLSTS models). . . .$57.7537480 Sold each

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.39

Shift Linkages


Polished Stainless Steel Shift Linkages for Softail® Models by LandmarkAdds sparkle to the primary side of your Softail® model. Includes easy-to-install tranny lever cover, aircraft-quality rod ends and custom hardware. Fit 5-speed Softail® models with Original Equipment forward controls from 1986 to present (except FLSTS models from 1997 thru 2003).16570 Diamond 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$154.19

16571 Twisted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.04

16573 Ball Milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$154.19

16574 Slotted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$154.19

16574

05575

05573

05574

05577

16571

16573

16574

16570

Small-Diameter Shift Linkages by LandmarkComplete sets that include the rod, heim joints, lever shroud and hardware.Available in highly-polished stainless steel versions, or chrome-plated.Features a smaller diameter rod than Landmark’s standard round rods.

Polished Stainless Steel16499 3"-extended for all 5-speed Softail® models (except FLSTS)

from 1986 to present (133/4"-long) . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.34

Chrome-Plated16320 Fits all 5-speed Softail® models (except FLSTS) from 1986

to present (103/4"-long) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

16321 3"-extended for all 5-speed Softail® models (except FLSTS)from 1986 to present (133/4"-long) . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

16322 4"-extended for all 5-speed Softail® models (except FLSTS)from 1986 to present (143/4"-long) . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

16324 Fits all Dyna Wide Glide® models from 1993 to present . . . . . . .$55.99

Polished Stainless Steel Shift Linkages for Softail® Models by LandmarkManufactured from aircraft-quality stainless steel and polished to shine like chrome. Each kit includes the hardware and heim joints. Lengths aremeasured from eye-center to eye-center. Fit all 5-speed Softail® modelsfrom 1986 to present (except FLSTS models from 1997 thru 2003). . .$119.1416422 Smooth16455 Hi-Lo16479 Diamond

Hi-Lo

Smooth

Diamond

‘Death’ Series Shifter Rods by Thunder Cycle Designs• An offspring of the original ‘Death’ Series• Smooth hourglass shape to dress-up your Softail® model• Machined from billet aluminum with show chrome quality finish• Available in 3 different lengths• Fit all 5-speed Softail® models from 1986 to present

(except FLSTS models from 1997 thru 2003)644018 91/2"-long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95

644019 101/2"-long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95

644020 121/2"-long for 3" extended forward controls . . . . . . . . . . . . . . . .$79.95

Shift Linkage for Softail® Models with Crossover Exhaust by LandmarkTop-quality polished stainless steel by Landmark won’t peel, pit, chip or discolor. Easy-to-install, includes all hardware. . . . . . . . . . . . . . . . . . . .$100.9916580 Fits FLSTS Heritage Springer® Softail® models from 1997 thru 2003

Ness-Tech® Shifter RodsChrome-plated billet shifter rods are available in four styles to get the rightcustom look. They fit stock forward controls on all Softail® models from1986 to present (except FLSTS models from 1997 thru 2003).05573 ‘V’ style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95

05574 ‘See-Thru’ style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.95

05575 ‘Round Grooved’ style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95

05577 ‘Flat Grooved’ style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.95

Footpegs &

Foot C

ontrols

3.40

Shift Levers

3


Chrome Shift Rod Spherical JointImproves the looks of shifter linkages. Fits allSoftail® models from 1986 thru 1996, most after-market forward control sets and many earlymodels. Sold each. . . . . . . . . . . . . . . . . . . . . . . .$15.5978351 Replaces OEM 24490-36

12452

12454

26193

12467

12451

discontinued

26192

12455

12456

12449

Chrome Shift Levers12452 Fits all FXR models from 1982 thru 1994

(repl. OEM 34599-81T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.74

12467 Fits FL models from 1974 thru 1984, and FXWG models from 1980 thru 1986 with splines (repl. OEM 34606-74) . . .$15.99

12456 Fits all FL models from 1965 thru 1984 with splined shafts (repl. OEM 34692-74TA) . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.99

12454 Fits all FX models 1974 thru 1985 with thru-the-case shifters, and all Dyna Glide and Softail® models (except FL Softail®

models) from 1986 to present (repl. OEM 34564-74TA) . . . .$14.94

060214 Outer lever for FLT, FLHT, FLHS and Road King® models from 1983 thru 1999, and FL Softail® models from 1986 to present (repl. OEM 33640-83) . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

26193 Fits all 5-speed Evolution® Sportster® models from 1991 to present (repl. OEM 34606-90T) . . . . . . . . . . . . . . . . . . . . . . . .$18.29

12449 Fits Evolution® Sportster® models from 1986 thru 1990 (repl. OEM 34605-86TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.74

26192 Fits Sportster® models from 1977 thru 1985 (repl. OEM 34606-75T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

12455 Fits Sportster® models from 1955 thru 1974, and early Big Twin models without splined shafts (repl. OEMs 34606-54TA, 34606-71) . . . . . . . . . . . . . . . . . . . . . .$21.49

12451 Polished shift lever for Sportster® models from 1975 thru 1976 (repl. OEM 34666-75) . . . . . . . . . . . . . . . . . . . . . . . . . .$36.49

Girder Shift Lever by KüryAkyn™

Not only is this shift lever hot looking, it alsoprovides increased leverage for easier, more precise shifting. Includes slide in cover to hidethe OEM shift spline. Fits Softail®, Dyna Glideand FXR models from 1982 to present. . . .$59.9548230 Girder shifter arm

Chrome Brake Pedal and ShiftLever for Floorboard ModelsUpgrade your Original Equipment brake andshift controls with these beautifully-crafted aluminum designs from Billet Concepts. Fits FLSoftail® models from 1986 to present and 5-speed‘Touring’ models from 1997 to present. . .$444.9947355 Sold in sets

12465

Chrome Shifter ShaftsChrome-plated shifter shafts to replace the stockparts on Big Twins from 1970 to present.

Fits all 4-speed FL models from 1974 thru 1984with splined shafts. . . . . . . . . . . . . . . . . . . . . . .$22.2912465 Replaces OEM 33660-74A

Fits 5-speed FXR models with diaphragm clutchfrom late 1984 thru 1994.28039 Replaces OEM 34621-84 . . . . . . . . . .$30.09

Fits FXWG and FX Softail® models from late 1985thru 1989. Also popular when removing heel/toeshifters on Fat Boy® and Heritage Softail® mod-els. Splined shaft shoulder bolt type.060069 Replaces OEM 33660-85 . . . . . . . . . .$15.49

Fits FL Softail® models from 1990 to present.060908 Replaces OEM 33668-90B . . . . . . . .$24.49

Retaining ring for the shift arm on 4-speed models from 1965 thru 1986. . . . . . . . . . . . . . .$3.4912468 Replaces OEM 11031 (pack of 10)

28039

Shifter Shaft CapUse this chrome plated cap to cover the shiftershaft when installing forward controls. The capis held in place with a flush mount socketheadscrew. Fits FX, FXR and Dyna Glide models withmid-shift, and wrench is included. . . . . . . . .$13.99060188 Sold each

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference


Landmark Heim JointsAircraft-quality rod ends ensuredurability and smooth shifting.Replace most heim joints with5/16"-24 right hand threads. Sold each.16586 Stainless steel . . . . .$27.44

16327 Chrome . . . . . . . . . . .$24.49

Chrome Shifter Rod EndReplacement chrome shift rod endfor Softail® models from 1984 topresent, 4-speed FXWG modelsfrom 1980 thru 1986 and DynaGlide models from 1991 thru 1992.Also great for custom linkageapplications using 5/16"-24 threads(replaces OEM 33871-85). . . .$15.59060052 Sold each

Chrome Heim JointsThese flawlessly-plated units can serve a variety of uses,particularly when fabricating custom shift and brakelinkages. The 5/16" heim joints are available with rightand left hand threads to make links that are adjustablewithout disassembly. Made in the U.S.A. Sold each. . . . . . . . . . . . . . . . . . . . . . . .$28.5919297 1/4" x 1/4-28 female19298 5/16" x 5/16-24 male19299 5/16" x 5/16-24 female19302 5/16" x 5/16-24 male (left hand thread)19301 3/8" x 3/8-24 female

070403

070224

070225070229

Foot Clutch for Big TwinsChrome reproduction of the rocker style foot clutch assembly found onhand shift Big Twins from 1965 thru 1978. Ideal for vintage restoration orfoot clutch/hand shift conversions on 4-speed Big Twins from 1941 thru1978. Works with steel or aluminum primary covers when appropriateclutch releasing lever and rod is used (replaces OEM 36810-65A).060075 Foot clutch assembly only, clutch rod not included . . . . . . . . . .$185.99

Note: Use CC #19079 releasing lever and CC #070225 rod with tin primary.

Replacement Parts070224 Rod end (replaces OEM 36916-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.89

070225 Clutch rod for tin primaries (replaces OEM 36917-36) . . . . . . . . .$10.99

070229 Clutch rod with rod end and jam nut for aluminum primaries (replaces OEMs 36917-65, 36916-36 and 7638) . . . . . . . . . . . . . . . .$22.99

070402 Spring (replaces OEM 36880-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49

070403 Pivot bearing cover (replaces OEM 36830-36) . . . . . . . . . . . . . . . . .$15.49

Shift Rod and Heim JointsThis is the Original Equipment part with chrome-plating. Fits all 4-speed FX models (except FXWG and Softail® models) from 1974 thru 1985. The stock hardware keeps it in place. . . . . .$52.9919315 Replaces OEM 34614-74

Shifter Toe PegsWide selection of toe pegs in the market from stock to custom. Sold each.12974 Black rubber toe peg with chrome end cap and short stud . . . . .$8.39

12345 Stock replacement black rubber toe peg with short stud (repl. OEM 34611-65T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49

12346 Stock replacement black rubber toe peg with long stud (repl. OEM 34609-52T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49

19955 Round O-ring toe peg (repl. OEM 34631-84T) . . . . . . . . . . . . . . . . .$9.49

Replacement O-Rings19957 Fits CC #19955 (repl. OEM 49030-84T) . . . . . . . . . . . . . . . . . . . . . . . . .$6.69

19955

12974

12345

Discontinued

12346

‘Death’ Series Smooth Shifter Pegsby Thunder Cycle Design• The original ‘Death’ Series• CNC-machined from billet

aluminum with show chrome quality• Enhances your custom bike like no other• Includes 5/16" mounting bolt for installation644016 3"-long (sold each) . . . . . . . . . . . . . . . . . . . .$39.95

644017 4"-long (sold each) . . . . . . . . . . . . . . . . . . . .$49.95

Heim Joints & Toe Pegs

Footpegs &

Foot C

ontrols

3.42

Shifter Brackets/Covers & Brake Pads

3


Shifter Anti-Rattle KitsTighten up that rattling shifter arm. Bushingand washer kit helps to tighten up looseshifters.26556 Fits floorboard-equipped 5-speed

models with heel/toe shifters from 1980 to present . . . . . . . . . . . . .$19.49

26683 Fits 5-speed FX Softail® models from 1986 thru 1999 . . . . . . . . . . . . . .$19.49

26557 Fits 5-speed ‘Touring’ models from 1980to present when converting from heel/toe shifter to toe shifter . . . . .$21.49

26684 Fits FL Softail® models from 1986 thru 1999 when converting from heel/toe shifter to toe shifter . . . . .$21.49

Chrome Steel Shifter BracketFits FX Softail® models with peg style forwardcontrols from 1990 thru 1999. . . . . . . . . . . . .$61.6917588 Replaces OEM 33683-90A

Shift Lever BracketsMade from heavy-gauge steel with added sup-port plates in the peg mount area for superiorstrength and styling. Does not crack like theOriginal Equipment item or other aftermarketparts. Beautifully polished and chrome-plated,and complete with bushing and zerk fittinginstalled, ready for use. 28033 Fits 4-speed FL models from 1970 thru

1984 (repl. OEM 33630-70) . . . . . . .$48.49

060141 Fits FL Softail® models from 1990 thru1999 (repl. OEM 33630-90A) . . . . .$46.99

Chrome Shifter Support BracketThis custom shifter bracket fits 4-speed FL mod-els from 1952 thru 1984. Also may be used as aforward control bracket on 4-speed FX modelsfrom 1971 thru 1985. . . . . . . . . . . . . . . . . . . . .$34.99060018 Replaces OEM 33630-52 Doss Shifter and Kickstand Bracket Cover

Durable stamped steel construction and ribbed accents cover the Original Equipment bracket and min-imize the cluttered look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.9946065 Fits all FL Softail® models from 1989 thru 1999Note: Will not work with Original Equipment highway bars.

Doss Brake Pedal CoverReplaces the Original Equipment rubber pad.Chrome-plated steel with protruding rubber ribslooks great by itself or with matching Dossfloorboard pads. . . . . . . . . . . . . . . . . . . . . . . . . . .$54.4946303 Fits FL Softail® models from 1986 to pres-

ent and FLT, FLHT, FLHS and Road King®


Matching Floorboard CoversMatching styling in a chrome-plated billet floor-board covers with rubber tread inserts. Includes8 new rubber isolation bumpers. . . . . . . . . . .$76.2946600 Fit all Original Equipment or aftermarket

rectangular floorboard bases

Chrome Shifter Support BracketThis heavy duty bracket features a built-in foot-peg mount and chrome finish. Works with largeor small diameter spade mount footpegs. FitsFXWG models from 1980 thru 1986 and FXSoftail® models from 1984 thru 1985.060043 Replaces OEM 33683-80 . . . . . . . . .$54.49

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.43

Brake Pedals & Pads


130408

130409

130395

KüryAkyn ISO® Brake Pedal Pads for Softail® ModelsProvides additional brake pedal surface area and matches ISO® pegs. Fits FX Softail® and Dyna Wide Glide® models from 1984 to present, and1983 thru 1986 4-speed FXWGs.130395 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.95

130396 Longhorn (25% larger) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.64

130396

Regency™ Multi-Position Extended Brake PedalsThe ultimate brake pedal! Extended length allows more room for your footand offers increased leverage for extra braking power. Unique adjustablefeature allows multi-positioning for maximum comfort. For use with floor-board models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.9946849 Fits all FL Softail® models from 2000 to present46850 Fits all FL Softail® models from 1991 thru 1999

and Touring models from 1997 to present

‘Stock Look’ Extended Brake Pedals by Walter’s WorkshopThe extra length provides more room for your foot and extra brakingpower. Made of chrome steel. Accepts Original Equipment and aftermarketpedal pads. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$163.6928861 Fits Softail® models with floorboards from late 1987 thru 199928863 Fits Softail® models with floorboards from 2000 to present28862 Fits all Touring models with floorboards from 1997 to present

BEFORE

AFTER

KüryAkyn ISO® Brake Pedal Pad for Touring and Softail® ModelsReplaces the stock pad with a larger, more comfortable footing surface. Fits FL Softail® and 5-speed Touring models from 1980 to present.130408 Brake pad kit . . . . . . . . . . . . . .$25.24

130409 Replacement rubber pads . . .$8.14

130413

130412

Brake Pedal PadsFits FX Softail® and Dyna Wide Glide®

models from 1984 to present, and 1983 thru 1986 4-speed FXWGs.130412 Slotted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49

130413 Diamond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

Footpegs &

Foot C

ontrols

3.44

3


Brake Pedal PadReplacement pad for FX Softail® and Dyna WideGlide® models from 1984 to present, and 1983thru 1986 4-speed FXWGs. . . . . . . . . . . . . . . . .$6.4912989 Replaces OEM 42532-82T (sold each)

Brake Pedal RubberReplacement black rubber for the brake pedalon all early 4-speed FL models. . . . . . . . . . . . .$4.8412243 Replaces OEM 36954-62T (sold each)

Brake Pedal Pad KitProvides you with you a larger, easier-to-use rearbrake pedal. Fits most Big Twin models from1965 thru 1986.28126 Kit (replaces OEM 36956-65TA) . . . .$9.99

12241 Brake pedal rubber only (replaces OEM 36964-67) . . . . . . . . . .$4.29

Chrome Brake Pedal Nut CoverHide the ugly nut and washer on floorboardbrake pedals. Chrome-plated cover installs easily. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.4915191 Fits FL Softail® models from 1986

to present

Hydraulic Brake Pedal for FL ModelsA chrome-plated pedal for FL models from 1973-early 1979. . . .$40.9928006 Replaces

OEM 42402-73A

15910

15911

Chrome Hydraulic Brake Pedal and Backing PlateFit FL models from late 1959 thru 1969.15911 Brake pedal

(repl. OEM 42402-59) . . . . . . . . . . . .$38.04

15910 Pedal backing plate (repl. OEM 42480-59) . . . . . . . . . . . .$38.39

Hydraulic Brake StopFits the master cylinder on 4-speed FL modelsfrom 1970-early 1979 and FX models from 1971-early 1972. . . . . . . . . . . . . . . . . . . . . . . . . . .$9.1919537 Replaces OEM 42411-70T

Late Hydraulic Brake Lever PlateFits FL models from 1973-early 1979. . . . . .$33.4919536 Replaces OEMs 42480-73, 42401-73A

Brake Pedals & Pads

Brake/Master Cylinder SpringsBrake shoe return springs. Fits all Sportster®

mechanical brakes and 1949 thru 1971 Big Twinfront brakes only. . . . . . . . . . . . . . . . . . . . . . . . .$10.9919516 Replaces OEM 41835-69) (sold in pairs)

Chrome hydraulic brake pedal return spring. Fits 1958 thru 1984 4-speed Big Twins. . . . .$7.9919316 Replaces OEMs 41835-69, 42427-58)

(sold each)

Brake Pedal Return SpringChrome-plated return spring with rubber-coatedends to prevent scratching. Fits all FX modelsfrom late 1972-early 1979. . . . . . . . . . . . . . . . .$2.9917578 Replaces OEM 42425-71


Master Cylinders & AccessoriesApparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.45

19069 12437 12436 19073

19070

1907119072

Chrome Brake Rods and Rod Clevis’19069 Foot pedal brake rod – 10"-long (front). Fits 1937 thru 1957

Big Twins (replaces OEM 42326-37) . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

19070 Rear brake rod – 23"-long. Fits 1937 thru 1957 Big Twins (replaces OEM 42257-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

12437 Short clevis for foot pedal brake rod. Fits 1937 thru 1957 Big Twins (replaces OEM 42333-30) . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

12436 Long clevis for foot pedal brake rod. Fits 45s from 1935 thru 1952, 1937 thru 1957 Big Twins and 1934 thru 1950 Servi-Cars (replaces OEM 42273-30) . . . . . . . . . . . . . . . . . . . . . . . . .$11.69

19071 Rear brake rod and clevis – 225/16"-long. Fits Sportster® and K models from 1952 thru 1966 (replaces OEM 42252-52) . . . . .$14.99

19072 Rear brake rod and clevis – 237/8"-long. Fits Sportster® models from 1967 thru 1974 (replaces OEM 42253-67) . . . . . . . . . . . . . . .$14.44

19073 Brake rod adjusting nut. Fits Sportster® and K models (except XLCR)from 1952 thru 1978 (replaces OEM 42264-52) . . . . . . . . . . . . . . . .$5.39

Master Cylinder and Brake Pedal Pivot Cover KitDress-up the industrial look of the rear master cylinder and brake pedalpivot with chrome-plated stamped steel cover kit.46326 Two-piece kit for FX Softail® models with Original Equipment

forward controls from late 1987 thru 1999 (banjo bolt in the master cylinder) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$87.39

Chrome Late-Model Rear Master CylindersChrome-plated reproductions of the 5/8"-bore Original Equipment unitswith the ribs polished off before plating. The units for 1987 to presentmodels also feature custom top covers.26255 Fits Sportster® models from 1982-early 1987 and FL Softail®

models from late 1986-early 1987(repl. OEMs 42453-82A, 42454-82) . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

25909 Fits Sportster® models from late 1987 to present (repl. OEM 42456-87B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$150.99

26072 Fits FL Softail® models from late 1987 thru 1999 (repl. OEM 42468-87D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$150.99

26687 Replacement cartridge assembly for CC #’s 25909, 26072 (repl. OEM 42382-87A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.99

26069 Rebuild kit for CC #26255 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

26255

25909

26072

Reproduction Brake PartsLong-obsolete parts are beautifully chrome-plated to help keep that vintage iron runningand on the road.38722 Front mechanical brake rod for UL, EL, and FL models from 1937 thru 1957

(replaces OEM 4073-37CH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.19

38724 Clevis kit with clevis, pin, washer, cotter and nut for front mechanical brake rod on rigid Big Twins from 1937 thru 1957 (replaces OEM 42333-30CH) . . . . . . . . . . .$24.19

38723 Rear mechanical brake rod for UL, EL and FL models from 1937 thru 1957 (replaces OEM 4065-36CH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.19

38725 Clevis kit with clevis, pin, washer, cotter and nut for rear mechanical brake rod on rigid Big Twins from from 1937 thru 1957 (replaces OEM 42273-30CH) . . . . .$24.19

Footpegs &

Foot C

ontrols

3.46

3


Chrome Rear Master CylinderChrome-plated reproduction of the ‘Girling’master cylinder fitted to all FX models from1983-early 1987 (except 1984 FXE). May also beinstalled on 1982-early 1987 FXR models, but thepipe plug on the back will have to be removedfor stop light switch installation. . . . . . . . . .$75.9926249 Replaces OEMs 42446-82A, 42470-82A

Wagner-Lockheed Type Master CylindersFit hydraulic drum brake applications on FLmodels from 1958 thru 1972 or FX models from1971 thru 1972, and rear disc brake applicationson FL and FX models from 1973-early 1979.

Master CylindersFor drum brake applications from 1958 thru 1972 (replaces OEM 41761-58)26222 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . .$65.69

26251 Ball burnished . . . . . . . . . . . . . . . . . . . .$54.49

For disc brake applications from 1973-early 1979(replaces OEM 41761-73)26218 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . .$57.29

26219 Ball burnished . . . . . . . . . . . . . . . . . . . .$52.89

Replacement Parts12535 Imported rebuild kit

(repl. OEM 41762-58A) . . . . . . . . . . .$20.69

130616 Rebuild kit. Fits disc or drum brakeapplications 1958-1979 . . . . . . . . . . .$15.49

26224 Replacement chrome cap ONLY . . .$12.4926101

2624817552

Kelsey-Hayes Type Master CylindersChrome reproductions of the Kelsey-Hayes mas-ter cylinder. Fits 1980 thru 1981 Sportster® mod-els, late 1979 thru 1982 FX models and 1983FXEs. Kit includes all internal components, boot,cover gasket and chrome top cover.26248 Complete 3/4"-bore master cylinder for

applications using Original Equipment-style rear calipers (repl. OEMs 42453-80A,42454-80A) . . . . . . . . . . . . . . . . . . . . . .$64.79

17552 Complete 5/8"-bore master cylinder for custom applications with multi-piston calipers . . . . . . . . . . . . . . . . . . . .$66.89

26101 Replacement master cylinder rebuild kit for CC #26248 (repl. OEM 42374-77B) . . . . . . . . . . . .$17.49

28139 Replacement master cylinder cap gasket (repl. OEM 42455-80) . . . . . .$18.49

26243 Replacement rubber dust boot (repl. OEM 41764-79) . . . . . . . . . . . . .$10.99

Note: CC #26248 master cylinder may also be installed on1979 Sportster® models if modifications are made to the hardline between the brake tee and the master cylinder.

GMA Chrome Master CylindersThese American-made CNC-machined billet aluminum master cylinders have a 5/8"-bore toproduce more pressure and increase stoppingpower. They’re available with Wagner or Kelsey-Hayes pattern mounting holes, and designed towork with GMA and other aftermarket caliperswith dual pistons. The brake hose end is tappedto 3/8"-24 NPT and can be adapted to mostbrake lines (except those with Banjo fittings).09980 Wagner-style mounting holes

(staggered) . . . . . . . . . . . . . . . . . . . . .$135.69

09982 Kelsey-Hayes style mounting holes (horizontal) . . . . . . . . . . . . . . . . . . . .$135.69

28139 Replacement top cover gasket (pack of 5) repl. OEM 42455-80 . . . .$18.49

Note: These are custom master cylinders and will not neces-sarily bolt-up to all Original Equipment components. We recommend only a qualified bike builder install these units.

09980

09982

Rear Master Cylinder by TolleManufactured especially for the Tolle Disc Brakekits CC #’s130230 and 130231. Not only is it anattractive matching accessory to the Disc Brakekit, it is recommended by Tolle to really get themost out of your set-up. 13mm bore master cylin-der is just over 1/2" diameter- providing morebrake pressure than the stock bore master cylin-ders. Billet aluminum construction, mirror pol-ished with Tolle logo machined into the topcover, smooth rounded bottom.130232 Fits late 1979 to present . . . . . . .$272.50

Premium® Master CylinderA complete Wagner-Lockheed master cylinderassembly from the Original Equipment supplier.For hydraulic drum brake applications on FLmodels from 1958 thru 1972 or FX models from1971 thru 1972.Note: Use only DOT 3 brake fluid. Will fit rear disc brakeapplications on FL and FX models from 1973-early 1979 if the residual pressure check valve is removed.

56400 Complete master cylinder (repl. OEM 41761-58) . . . . . . . . . . . .$93.29

12535 Imported rebuild kit (repl. OEM 41762-58A) . . . . . . . . . . .$20.69

26254 Dust boot for 1958 thru 1969 Big Twins (repl. OEM 41764-58) pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$15.49

28129 Dust boot for 1970-early 1979 Big Twins (repl. OEM 41764-70) pack of 5 . . . .$11.39

Master Cylinders

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference

3.47

Master Cylinder Rebuild Kits


Rear Master Cylinder Mounting HardwareReplacement master cylinder mounting studs tofit FL Softail® models from late 1986 thru 1999.98697 Sold in pairs (repl. OEM 42301-87A) $5.44

Rebuild Kit for Kelsey-HayesMaster CylindersComplete rear master cylinder rebuild kit for allSportster® models from 1979 thru 1981, FL mod-els from late 1979 thru 1984, FX models fromlate 1979 thru 1983 and FLT/FLHT models from1980 thru 1985. . . . . . . . . . . . . . . . . . . . . . . . .$17.4926101 Replaces OEM 42374-77B

Rear Master Cylinder Rebuild KitsComplete rear wheel master cylinder rebuild kit.26125 Fits all Sportster® models 1982-early

1987; FX models 1983 thru 1986; Softail® models 1984-early 1987 (repl. OEM 42374-82A) . . . . . . . . . . .$18.59

Master Cylinder Rebuild Kits for FXR, Dyna Glide and FLT/FLHT ModelsAll the components needed to restore braking performance.26062 Rear for all FLT, FLHT and FLHS

models from 1987 thru 1992 (repl. OEM 42374-86) . . . . . . . . . . . . .$12.89

26061 Front for all FLT, FLHT and FLHS modelsfrom 1987 thru 1995; FXRT and FXRSmodels from 1987 thru 1992 and Dyna Glide models from 1991 thru 1994 . . . . . . . . . . . . . . . . . . . .$9.29

Master Cylinder Rebuild KitsRear master cylinder rebuild kit for all modelsfrom late 1987 to present. . . . . . . . . . . . . . . .$33.9985472 Replaces OEM 42382-87A

Rear Master Cylinder Cartridge AssemblySimplifies rebuilding the master cylinder. FitsSoftail®, FXR and Sportster® models from late1987 to present and ‘Touring’ models from 1992 to present. . . . . . . . . . . . . . . . . . . . . . . . . .$46.9926687 Replaces OEM 42382-87A

Late-Model Master CylinderRebuild KitsIncludes everything needed to completelyrebuild stock handlebar master cylinders onmodels from 1996 to present.26774 For 9/16" bore single front disc master

cylinder (repl. OEM 45006-96) . . . . .$17.59

26773 For 11/16" bore dual front disc mastercylinder (repl. OEM 45072-96) . . . . .$17.59

26243

Master Cylinder BootsFits the rear master cylinder on 1980 thru 1981Sportster® models, late 1979 thru 1982 FX mod-els, and 1983 FXE models. . . . . . . . . . . . . . . . .$10.9926243 Replaces OEM 41764-79 (pack of 5)

Fits the rear master cylinder on most modelsfrom 1980-early 1987. . . . . . . . . . . . . . . . . . . . .$20.6928138 Replaces OEM 40922-79 (pack of 5)

Fits the rear master cylinder on Big Twin modelsfrom 1970-early 1979. . . . . . . . . . . . . . . . . . . . .$11.3928129 Replaces OEM 41764-70 (pack of 5)

Fits the rear master cylinder on Big Twin modelsfrom 1958 thru 1969. . . . . . . . . . . . . . . . . . . . .$15.4926254 Replaces OEM 41764-58 (pack of 10)

26254

28129

28138

LateMasterCylinderCover GasketFits the rear master cylinder onlate 1979 thru 1984 FL and late 1979 thru1982 FX models, the rear master cylinder on1977 thru 1981 Sportster® models as well as therear master cylinder remote reservoirs on all BigTwin models from 1982 to present. . . . . . .$3.70 ea28139 Replaces OEM 42455-80 (pack of 5)

Early Master CylinderCover GasketFit all models from 1972 thru1981 (pack of 10) . .$13.69 each10432 Replaces OEM 45012-72

Footpegs &

Foot C

ontrols

3.48

3


26310

26311

Washers for Banjo BoltsSealing washers for the front and rear banjo fit-tings. Sold in packs of 10. . . . . . . . . . . . . . . . .$11.2926310 10 mm. Fits dual disc handlebar master

cylinders from 1982 to present, andbrake calipers on most models from 1984 to present (repl. OEM 41731-88)

26311 12 mm. Fits all single disc handlebar master cylinders from 1984 to present (repl. OEM 41733-88)

Goodridge Chrome Double Banjo BoltThis chrome banjo bolt allows 2 banjos to be fit-ted for dual caliper applications. Use it on frontdual disc models to run lines directly fromcaliper to master cylinder and eliminate “T”fittings, or on the rear to link two caliperstogether. 3/8"-24 threads fits most front dualdisc master cylinders, rear calipers and rear master cylinders from 1982 to present. . . . .$8.09130789 Sold each

Chrome Banjo Bolt KitsReplacement items for CC or Original Equip-ment master cylinders and calipers. Available for most models from 1982 to present. Includes washers. Sold each.26270 For 10mm banjo fittings . . . . . . . . .$10.99

26294 For 12mm banjo fittings . . . . . . . . . .$6.94

26271 For 10mm banjo bolts with 12mm brake lines . . . . . . . . . . .$10.99

26271 26270

110595

110596

Donnie Smith Signature Series™

Banjo BoltA highly visible item that’s often overlooked bycustom builders, this brake banjo bolt is a greatplace to start your Signature Series collection.Designed not only to look good but, be easy tofasten with a conventional wrench. Available forfront and rear applications. Sold each.110595 3/8"-24 banjo bolt. Fits 10mm banjo on

front dual disc master cylinders and rearmaster cylinders and calipers 1982 topresent (repl. OEM 41747-82) . . . .$12.49

110596 7/16"-24 banjo bolt. Fits 12mm banjo onfront single disc master cylinders 1983 topresent (repl. OEM 41739-84) . . . .$12.49

Crush WashersTop-quality washers are made in the USA for thefollowing applications. Sold in packs of 10.56236 Master cylinder for Big Twins from 1983

thru 1989; Sportster® models from 1982-early 1989 (repl. OEM 41731-82) . . . .$9.49

56237 Master cylinder for Big Twins from 1984thru 1991; Sportster® models from 1984-early 1991 (repl. OEM 45583-83) . . . . .$9.49

56242 Brake line for Big Twins from 1958 thru1972 (repl. OEM 41744-58) . . . . . . . .$8.74

020538

110531

Chrome Brake Line FittingsThese brake line fittings are used on handlebarmounted master cylinder and front or rearbrake line tees. Fit many models from 1972 thru 1981. Sold in packs of 5.020538 Plug – 1/8" NPT

(repl. OEM 42311-58) . . . . . . . . . . . .$12.49

110531 Straight male – 1/8" NPT to female 3/8"-24 inverted flare (repl. OEM 63609-72) . . . . . . . . . . . . .$9.49

28190 90° right-angle fitting – 1/8" NPT tofemale 3/8"-24 inverted flare. Connectsthe front brake line to the handlebarmaster cylinder and brake tee. (repl. OEM 43307-78) . . . . . . . . . . . .$22.99

28190

Precision Performance Banjo Bolt3/8"-24 banjo bolt fits 10mm banjo on modelsfrom 1982 to present, and includes sealingwashers (repl. OEM 41747-82). . . . . . . . . . . . .$7.99662000 Sold each

Russell Brake Light Switch Banjo BoltFeatures integral threaded 3/8"-24 tap to accept stan-dard brake light switch. Thread switch into banjo andthen into master cylinder. Eliminates additional tee forbrake light switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.2913997 Sold each

Master Cylinder SpacersChrome spacers have a 3/8"-diameter hole, are 1/4"-thick and fit between theWagner-Lockheed style rear master cylinder andits backing plate. Fit all Big Twins from 1958-early 1979, and can be used as a universal spacerin other applications. . . . . . . . . . . . . . . . . . . . . . .$6.2919509 Replaces OEM 50668-35 (pack of 5)

Master Cylinder Fittings

Apparel

Bike Kits& Trailers

Seats & Bags

Foot Controls

Hand Controls

Lighting

Electrical

Exhaust

Intake

Engine

Gaskets

Tranny& Clutch

Driveline


Frames

Forks& Shocks

Sheet-metal

General

CrossReference


Brake Light Banjo Bolts by GoodridgeCombines a banjo bolt with a brake light pres-sure switch. Great for custom work. Zinc-platedor gold with flexible plastic sleeve covers and11"-long wiring pigtail. Two sizes available for disc brake applications. Sold each.

Gold131721 3/8"-24 for 10mm banjo . . . . . . . . .$19.39

131723 7/16"-24 for 12mm banjo . . . . . . . .$19.39

Zinc-Plated14137 3/8"-24 for 10mm banjo . . . . . . . . .$18.99

14138 7/16"-24 for 12mm banjo . . . . . . . .$17.79

131721

Chrome Master Cylinder PlungersFits all Big Twin models with Wagner Lockheedmaster cylinders. Sold each. . . . . . . . . . . . . . .$16.7925231 1958 thru 1969 (repl. OEM 41770-58)28071 1970-early 1979 (repl. OEM 42333-70)

25231

28071

Doss Speed Line Plunger for Softail® ModelsThis chrome-plated steel master cylinder plungerfeatures distinctive styling and fits FX Softail®

models from late 1987 thru 1999. . . . . . . . .$21.9946333 Sold each

KüryAkyn™ Rear Master CylinderCover for Late Sportster® ModelsThis chrome-plated die-cast cover completelycovers the rear master cylinder and incorporatesa fluid level viewing window. . . . . . . . . . . . .$39.9548210 Fits all 5-speed Sportster® models

from 1991 thru 1999

Rear Master Cylinder CoverChrome stamped steel rear master cylinder cover. . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.09130019 Fits all 5-speed Sportster® models

from 1991 thru 1999.

Rear Master Cylinder CoverThis chrome cover is a snap to install and willadd a custom touch. . . . . . . . . . . . . . . . . . . . . .$15.99130018 Fits all FLHT and Road King® models

from 1997 thru 1999

340836

Donnie Smith Signature Series™

Brake and Shift CoversThese stamped steel covers are designed to fitover the brake or shift brackets on FL Softail®

models with factory floorboards from 1987 topresent. Easy bolt-on application. . . . . . . . .$21.99340835 Shifter cover340836 Brake cover

340835

Chrome Master Cylinder ReservoirChrome-plated A.B.S. plastic reservoir thatreplaces the black Original Equipment item. Fits Big Twins with late-model reservoir-style mastercylinders from 1982 thru 1999.26250 Replaces OEM 41800-81A . . . . . . . .$15.49

28139 Cover gasket (repl. OEM 42455-80) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . .$18.49

Master Cylinder CoverFits 4-speed FL models from late 1979 thru 1984,FLT models from 1980 thru 1982, FXWG modelsfrom 1980 thru 1982, and FL Softail® models from 1987 to present. . . . . . . . . . . . . . . . . . . . .$18.49130008 Replaces OEM 41745-79T

Master Cylinder Covers & Plungers

footpegs & foot controls - custom bikes by mike 3.pdf · apparel bike kits & trailers seats...

Documents